1 /* 2 * Copyright (C) 2008 STMicroelectronics 3 * Copyright (C) 2010 Alessandro Rubini 4 * Copyright (C) 2010 Linus Walleij for ST-Ericsson 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2, as 8 * published by the Free Software Foundation. 9 */ 10 #include <linux/init.h> 11 #include <linux/interrupt.h> 12 #include <linux/irq.h> 13 #include <linux/io.h> 14 #include <linux/clockchips.h> 15 #include <linux/clocksource.h> 16 #include <linux/of_address.h> 17 #include <linux/of_irq.h> 18 #include <linux/of_platform.h> 19 #include <linux/clk.h> 20 #include <linux/jiffies.h> 21 #include <linux/delay.h> 22 #include <linux/err.h> 23 #include <linux/sched_clock.h> 24 #include <asm/mach/time.h> 25 26 /* 27 * The MTU device hosts four different counters, with 4 set of 28 * registers. These are register names. 29 */ 30 31 #define MTU_IMSC 0x00 /* Interrupt mask set/clear */ 32 #define MTU_RIS 0x04 /* Raw interrupt status */ 33 #define MTU_MIS 0x08 /* Masked interrupt status */ 34 #define MTU_ICR 0x0C /* Interrupt clear register */ 35 36 /* per-timer registers take 0..3 as argument */ 37 #define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ 38 #define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ 39 #define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ 40 #define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ 41 42 /* bits for the control register */ 43 #define MTU_CRn_ENA 0x80 44 #define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ 45 #define MTU_CRn_PRESCALE_MASK 0x0c 46 #define MTU_CRn_PRESCALE_1 0x00 47 #define MTU_CRn_PRESCALE_16 0x04 48 #define MTU_CRn_PRESCALE_256 0x08 49 #define MTU_CRn_32BITS 0x02 50 #define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ 51 52 /* Other registers are usual amba/primecell registers, currently not used */ 53 #define MTU_ITCR 0xff0 54 #define MTU_ITOP 0xff4 55 56 #define MTU_PERIPH_ID0 0xfe0 57 #define MTU_PERIPH_ID1 0xfe4 58 #define MTU_PERIPH_ID2 0xfe8 59 #define MTU_PERIPH_ID3 0xfeC 60 61 #define MTU_PCELL0 0xff0 62 #define MTU_PCELL1 0xff4 63 #define MTU_PCELL2 0xff8 64 #define MTU_PCELL3 0xffC 65 66 static void __iomem *mtu_base; 67 static bool clkevt_periodic; 68 static u32 clk_prescale; 69 static u32 nmdk_cycle; /* write-once */ 70 static struct delay_timer mtu_delay_timer; 71 72 #ifdef CONFIG_CLKSRC_NOMADIK_MTU_SCHED_CLOCK 73 /* 74 * Override the global weak sched_clock symbol with this 75 * local implementation which uses the clocksource to get some 76 * better resolution when scheduling the kernel. 77 */ 78 static u64 notrace nomadik_read_sched_clock(void) 79 { 80 if (unlikely(!mtu_base)) 81 return 0; 82 83 return -readl(mtu_base + MTU_VAL(0)); 84 } 85 #endif 86 87 static unsigned long nmdk_timer_read_current_timer(void) 88 { 89 return ~readl_relaxed(mtu_base + MTU_VAL(0)); 90 } 91 92 /* Clockevent device: use one-shot mode */ 93 static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) 94 { 95 writel(1 << 1, mtu_base + MTU_IMSC); 96 writel(evt, mtu_base + MTU_LR(1)); 97 /* Load highest value, enable device, enable interrupts */ 98 writel(MTU_CRn_ONESHOT | clk_prescale | 99 MTU_CRn_32BITS | MTU_CRn_ENA, 100 mtu_base + MTU_CR(1)); 101 102 return 0; 103 } 104 105 static void nmdk_clkevt_reset(void) 106 { 107 if (clkevt_periodic) { 108 /* Timer: configure load and background-load, and fire it up */ 109 writel(nmdk_cycle, mtu_base + MTU_LR(1)); 110 writel(nmdk_cycle, mtu_base + MTU_BGLR(1)); 111 112 writel(MTU_CRn_PERIODIC | clk_prescale | 113 MTU_CRn_32BITS | MTU_CRn_ENA, 114 mtu_base + MTU_CR(1)); 115 writel(1 << 1, mtu_base + MTU_IMSC); 116 } else { 117 /* Generate an interrupt to start the clockevent again */ 118 (void) nmdk_clkevt_next(nmdk_cycle, NULL); 119 } 120 } 121 122 static int nmdk_clkevt_shutdown(struct clock_event_device *evt) 123 { 124 writel(0, mtu_base + MTU_IMSC); 125 /* disable timer */ 126 writel(0, mtu_base + MTU_CR(1)); 127 /* load some high default value */ 128 writel(0xffffffff, mtu_base + MTU_LR(1)); 129 return 0; 130 } 131 132 static int nmdk_clkevt_set_oneshot(struct clock_event_device *evt) 133 { 134 clkevt_periodic = false; 135 return 0; 136 } 137 138 static int nmdk_clkevt_set_periodic(struct clock_event_device *evt) 139 { 140 clkevt_periodic = true; 141 nmdk_clkevt_reset(); 142 return 0; 143 } 144 145 static void nmdk_clksrc_reset(void) 146 { 147 /* Disable */ 148 writel(0, mtu_base + MTU_CR(0)); 149 150 /* ClockSource: configure load and background-load, and fire it up */ 151 writel(nmdk_cycle, mtu_base + MTU_LR(0)); 152 writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); 153 154 writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, 155 mtu_base + MTU_CR(0)); 156 } 157 158 static void nmdk_clkevt_resume(struct clock_event_device *cedev) 159 { 160 nmdk_clkevt_reset(); 161 nmdk_clksrc_reset(); 162 } 163 164 static struct clock_event_device nmdk_clkevt = { 165 .name = "mtu_1", 166 .features = CLOCK_EVT_FEAT_ONESHOT | 167 CLOCK_EVT_FEAT_PERIODIC | 168 CLOCK_EVT_FEAT_DYNIRQ, 169 .rating = 200, 170 .set_state_shutdown = nmdk_clkevt_shutdown, 171 .set_state_periodic = nmdk_clkevt_set_periodic, 172 .set_state_oneshot = nmdk_clkevt_set_oneshot, 173 .set_next_event = nmdk_clkevt_next, 174 .resume = nmdk_clkevt_resume, 175 }; 176 177 /* 178 * IRQ Handler for timer 1 of the MTU block. 179 */ 180 static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) 181 { 182 struct clock_event_device *evdev = dev_id; 183 184 writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */ 185 evdev->event_handler(evdev); 186 return IRQ_HANDLED; 187 } 188 189 static struct irqaction nmdk_timer_irq = { 190 .name = "Nomadik Timer Tick", 191 .flags = IRQF_TIMER, 192 .handler = nmdk_timer_interrupt, 193 .dev_id = &nmdk_clkevt, 194 }; 195 196 static void __init nmdk_timer_init(void __iomem *base, int irq, 197 struct clk *pclk, struct clk *clk) 198 { 199 unsigned long rate; 200 201 mtu_base = base; 202 203 BUG_ON(clk_prepare_enable(pclk)); 204 BUG_ON(clk_prepare_enable(clk)); 205 206 /* 207 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz 208 * for ux500. 209 * Use a divide-by-16 counter if the tick rate is more than 32MHz. 210 * At 32 MHz, the timer (with 32 bit counter) can be programmed 211 * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer 212 * with 16 gives too low timer resolution. 213 */ 214 rate = clk_get_rate(clk); 215 if (rate > 32000000) { 216 rate /= 16; 217 clk_prescale = MTU_CRn_PRESCALE_16; 218 } else { 219 clk_prescale = MTU_CRn_PRESCALE_1; 220 } 221 222 /* Cycles for periodic mode */ 223 nmdk_cycle = DIV_ROUND_CLOSEST(rate, HZ); 224 225 226 /* Timer 0 is the free running clocksource */ 227 nmdk_clksrc_reset(); 228 229 if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0", 230 rate, 200, 32, clocksource_mmio_readl_down)) 231 pr_err("timer: failed to initialize clock source %s\n", 232 "mtu_0"); 233 234 #ifdef CONFIG_CLKSRC_NOMADIK_MTU_SCHED_CLOCK 235 sched_clock_register(nomadik_read_sched_clock, 32, rate); 236 #endif 237 238 /* Timer 1 is used for events, register irq and clockevents */ 239 setup_irq(irq, &nmdk_timer_irq); 240 nmdk_clkevt.cpumask = cpumask_of(0); 241 nmdk_clkevt.irq = irq; 242 clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU); 243 244 mtu_delay_timer.read_current_timer = &nmdk_timer_read_current_timer; 245 mtu_delay_timer.freq = rate; 246 register_current_timer_delay(&mtu_delay_timer); 247 } 248 249 static void __init nmdk_timer_of_init(struct device_node *node) 250 { 251 struct clk *pclk; 252 struct clk *clk; 253 void __iomem *base; 254 int irq; 255 256 base = of_iomap(node, 0); 257 if (!base) 258 panic("Can't remap registers"); 259 260 pclk = of_clk_get_by_name(node, "apb_pclk"); 261 if (IS_ERR(pclk)) 262 panic("could not get apb_pclk"); 263 264 clk = of_clk_get_by_name(node, "timclk"); 265 if (IS_ERR(clk)) 266 panic("could not get timclk"); 267 268 irq = irq_of_parse_and_map(node, 0); 269 if (irq <= 0) 270 panic("Can't parse IRQ"); 271 272 nmdk_timer_init(base, irq, pclk, clk); 273 } 274 CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu", 275 nmdk_timer_of_init); 276