1 // SPDX-License-Identifier: GPL-2.0 2 3 /* 4 * Clocksource driver for the synthetic counter and timers 5 * provided by the Hyper-V hypervisor to guest VMs, as described 6 * in the Hyper-V Top Level Functional Spec (TLFS). This driver 7 * is instruction set architecture independent. 8 * 9 * Copyright (C) 2019, Microsoft, Inc. 10 * 11 * Author: Michael Kelley <mikelley@microsoft.com> 12 */ 13 14 #include <linux/percpu.h> 15 #include <linux/cpumask.h> 16 #include <linux/clockchips.h> 17 #include <linux/clocksource.h> 18 #include <linux/sched_clock.h> 19 #include <linux/mm.h> 20 #include <linux/cpuhotplug.h> 21 #include <linux/interrupt.h> 22 #include <linux/irq.h> 23 #include <linux/acpi.h> 24 #include <linux/hyperv.h> 25 #include <clocksource/hyperv_timer.h> 26 #include <asm/hyperv-tlfs.h> 27 #include <asm/mshyperv.h> 28 29 static struct clock_event_device __percpu *hv_clock_event; 30 static u64 hv_sched_clock_offset __ro_after_init; 31 32 /* 33 * If false, we're using the old mechanism for stimer0 interrupts 34 * where it sends a VMbus message when it expires. The old 35 * mechanism is used when running on older versions of Hyper-V 36 * that don't support Direct Mode. While Hyper-V provides 37 * four stimer's per CPU, Linux uses only stimer0. 38 * 39 * Because Direct Mode does not require processing a VMbus 40 * message, stimer interrupts can be enabled earlier in the 41 * process of booting a CPU, and consistent with when timer 42 * interrupts are enabled for other clocksource drivers. 43 * However, for legacy versions of Hyper-V when Direct Mode 44 * is not enabled, setting up stimer interrupts must be 45 * delayed until VMbus is initialized and can process the 46 * interrupt message. 47 */ 48 static bool direct_mode_enabled; 49 50 static int stimer0_irq = -1; 51 static int stimer0_message_sint; 52 static __maybe_unused DEFINE_PER_CPU(long, stimer0_evt); 53 54 /* 55 * Common code for stimer0 interrupts coming via Direct Mode or 56 * as a VMbus message. 57 */ 58 void hv_stimer0_isr(void) 59 { 60 struct clock_event_device *ce; 61 62 ce = this_cpu_ptr(hv_clock_event); 63 ce->event_handler(ce); 64 } 65 EXPORT_SYMBOL_GPL(hv_stimer0_isr); 66 67 /* 68 * stimer0 interrupt handler for architectures that support 69 * per-cpu interrupts, which also implies Direct Mode. 70 */ 71 static irqreturn_t __maybe_unused hv_stimer0_percpu_isr(int irq, void *dev_id) 72 { 73 hv_stimer0_isr(); 74 return IRQ_HANDLED; 75 } 76 77 static int hv_ce_set_next_event(unsigned long delta, 78 struct clock_event_device *evt) 79 { 80 u64 current_tick; 81 82 current_tick = hv_read_reference_counter(); 83 current_tick += delta; 84 hv_set_register(HV_REGISTER_STIMER0_COUNT, current_tick); 85 return 0; 86 } 87 88 static int hv_ce_shutdown(struct clock_event_device *evt) 89 { 90 hv_set_register(HV_REGISTER_STIMER0_COUNT, 0); 91 hv_set_register(HV_REGISTER_STIMER0_CONFIG, 0); 92 if (direct_mode_enabled && stimer0_irq >= 0) 93 disable_percpu_irq(stimer0_irq); 94 95 return 0; 96 } 97 98 static int hv_ce_set_oneshot(struct clock_event_device *evt) 99 { 100 union hv_stimer_config timer_cfg; 101 102 timer_cfg.as_uint64 = 0; 103 timer_cfg.enable = 1; 104 timer_cfg.auto_enable = 1; 105 if (direct_mode_enabled) { 106 /* 107 * When it expires, the timer will directly interrupt 108 * on the specified hardware vector/IRQ. 109 */ 110 timer_cfg.direct_mode = 1; 111 timer_cfg.apic_vector = HYPERV_STIMER0_VECTOR; 112 if (stimer0_irq >= 0) 113 enable_percpu_irq(stimer0_irq, IRQ_TYPE_NONE); 114 } else { 115 /* 116 * When it expires, the timer will generate a VMbus message, 117 * to be handled by the normal VMbus interrupt handler. 118 */ 119 timer_cfg.direct_mode = 0; 120 timer_cfg.sintx = stimer0_message_sint; 121 } 122 hv_set_register(HV_REGISTER_STIMER0_CONFIG, timer_cfg.as_uint64); 123 return 0; 124 } 125 126 /* 127 * hv_stimer_init - Per-cpu initialization of the clockevent 128 */ 129 static int hv_stimer_init(unsigned int cpu) 130 { 131 struct clock_event_device *ce; 132 133 if (!hv_clock_event) 134 return 0; 135 136 ce = per_cpu_ptr(hv_clock_event, cpu); 137 ce->name = "Hyper-V clockevent"; 138 ce->features = CLOCK_EVT_FEAT_ONESHOT; 139 ce->cpumask = cpumask_of(cpu); 140 ce->rating = 1000; 141 ce->set_state_shutdown = hv_ce_shutdown; 142 ce->set_state_oneshot = hv_ce_set_oneshot; 143 ce->set_next_event = hv_ce_set_next_event; 144 145 clockevents_config_and_register(ce, 146 HV_CLOCK_HZ, 147 HV_MIN_DELTA_TICKS, 148 HV_MAX_MAX_DELTA_TICKS); 149 return 0; 150 } 151 152 /* 153 * hv_stimer_cleanup - Per-cpu cleanup of the clockevent 154 */ 155 int hv_stimer_cleanup(unsigned int cpu) 156 { 157 struct clock_event_device *ce; 158 159 if (!hv_clock_event) 160 return 0; 161 162 /* 163 * In the legacy case where Direct Mode is not enabled 164 * (which can only be on x86/64), stimer cleanup happens 165 * relatively early in the CPU offlining process. We 166 * must unbind the stimer-based clockevent device so 167 * that the LAPIC timer can take over until clockevents 168 * are no longer needed in the offlining process. Note 169 * that clockevents_unbind_device() eventually calls 170 * hv_ce_shutdown(). 171 * 172 * The unbind should not be done when Direct Mode is 173 * enabled because we may be on an architecture where 174 * there are no other clockevent devices to fallback to. 175 */ 176 ce = per_cpu_ptr(hv_clock_event, cpu); 177 if (direct_mode_enabled) 178 hv_ce_shutdown(ce); 179 else 180 clockevents_unbind_device(ce, cpu); 181 182 return 0; 183 } 184 EXPORT_SYMBOL_GPL(hv_stimer_cleanup); 185 186 /* 187 * These placeholders are overridden by arch specific code on 188 * architectures that need special setup of the stimer0 IRQ because 189 * they don't support per-cpu IRQs (such as x86/x64). 190 */ 191 void __weak hv_setup_stimer0_handler(void (*handler)(void)) 192 { 193 }; 194 195 void __weak hv_remove_stimer0_handler(void) 196 { 197 }; 198 199 #ifdef CONFIG_ACPI 200 /* Called only on architectures with per-cpu IRQs (i.e., not x86/x64) */ 201 static int hv_setup_stimer0_irq(void) 202 { 203 int ret; 204 205 ret = acpi_register_gsi(NULL, HYPERV_STIMER0_VECTOR, 206 ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_HIGH); 207 if (ret < 0) { 208 pr_err("Can't register Hyper-V stimer0 GSI. Error %d", ret); 209 return ret; 210 } 211 stimer0_irq = ret; 212 213 ret = request_percpu_irq(stimer0_irq, hv_stimer0_percpu_isr, 214 "Hyper-V stimer0", &stimer0_evt); 215 if (ret) { 216 pr_err("Can't request Hyper-V stimer0 IRQ %d. Error %d", 217 stimer0_irq, ret); 218 acpi_unregister_gsi(stimer0_irq); 219 stimer0_irq = -1; 220 } 221 return ret; 222 } 223 224 static void hv_remove_stimer0_irq(void) 225 { 226 if (stimer0_irq == -1) { 227 hv_remove_stimer0_handler(); 228 } else { 229 free_percpu_irq(stimer0_irq, &stimer0_evt); 230 acpi_unregister_gsi(stimer0_irq); 231 stimer0_irq = -1; 232 } 233 } 234 #else 235 static int hv_setup_stimer0_irq(void) 236 { 237 return 0; 238 } 239 240 static void hv_remove_stimer0_irq(void) 241 { 242 } 243 #endif 244 245 /* hv_stimer_alloc - Global initialization of the clockevent and stimer0 */ 246 int hv_stimer_alloc(bool have_percpu_irqs) 247 { 248 int ret; 249 250 /* 251 * Synthetic timers are always available except on old versions of 252 * Hyper-V on x86. In that case, return as error as Linux will use a 253 * clockevent based on emulated LAPIC timer hardware. 254 */ 255 if (!(ms_hyperv.features & HV_MSR_SYNTIMER_AVAILABLE)) 256 return -EINVAL; 257 258 hv_clock_event = alloc_percpu(struct clock_event_device); 259 if (!hv_clock_event) 260 return -ENOMEM; 261 262 direct_mode_enabled = ms_hyperv.misc_features & 263 HV_STIMER_DIRECT_MODE_AVAILABLE; 264 265 /* 266 * If Direct Mode isn't enabled, the remainder of the initialization 267 * is done later by hv_stimer_legacy_init() 268 */ 269 if (!direct_mode_enabled) 270 return 0; 271 272 if (have_percpu_irqs) { 273 ret = hv_setup_stimer0_irq(); 274 if (ret) 275 goto free_clock_event; 276 } else { 277 hv_setup_stimer0_handler(hv_stimer0_isr); 278 } 279 280 /* 281 * Since we are in Direct Mode, stimer initialization 282 * can be done now with a CPUHP value in the same range 283 * as other clockevent devices. 284 */ 285 ret = cpuhp_setup_state(CPUHP_AP_HYPERV_TIMER_STARTING, 286 "clockevents/hyperv/stimer:starting", 287 hv_stimer_init, hv_stimer_cleanup); 288 if (ret < 0) { 289 hv_remove_stimer0_irq(); 290 goto free_clock_event; 291 } 292 return ret; 293 294 free_clock_event: 295 free_percpu(hv_clock_event); 296 hv_clock_event = NULL; 297 return ret; 298 } 299 EXPORT_SYMBOL_GPL(hv_stimer_alloc); 300 301 /* 302 * hv_stimer_legacy_init -- Called from the VMbus driver to handle 303 * the case when Direct Mode is not enabled, and the stimer 304 * must be initialized late in the CPU onlining process. 305 * 306 */ 307 void hv_stimer_legacy_init(unsigned int cpu, int sint) 308 { 309 if (direct_mode_enabled) 310 return; 311 312 /* 313 * This function gets called by each vCPU, so setting the 314 * global stimer_message_sint value each time is conceptually 315 * not ideal, but the value passed in is always the same and 316 * it avoids introducing yet another interface into this 317 * clocksource driver just to set the sint in the legacy case. 318 */ 319 stimer0_message_sint = sint; 320 (void)hv_stimer_init(cpu); 321 } 322 EXPORT_SYMBOL_GPL(hv_stimer_legacy_init); 323 324 /* 325 * hv_stimer_legacy_cleanup -- Called from the VMbus driver to 326 * handle the case when Direct Mode is not enabled, and the 327 * stimer must be cleaned up early in the CPU offlining 328 * process. 329 */ 330 void hv_stimer_legacy_cleanup(unsigned int cpu) 331 { 332 if (direct_mode_enabled) 333 return; 334 (void)hv_stimer_cleanup(cpu); 335 } 336 EXPORT_SYMBOL_GPL(hv_stimer_legacy_cleanup); 337 338 /* 339 * Do a global cleanup of clockevents for the cases of kexec and 340 * vmbus exit 341 */ 342 void hv_stimer_global_cleanup(void) 343 { 344 int cpu; 345 346 /* 347 * hv_stime_legacy_cleanup() will stop the stimer if Direct 348 * Mode is not enabled, and fallback to the LAPIC timer. 349 */ 350 for_each_present_cpu(cpu) { 351 hv_stimer_legacy_cleanup(cpu); 352 } 353 354 if (!hv_clock_event) 355 return; 356 357 if (direct_mode_enabled) { 358 cpuhp_remove_state(CPUHP_AP_HYPERV_TIMER_STARTING); 359 hv_remove_stimer0_irq(); 360 stimer0_irq = -1; 361 } 362 free_percpu(hv_clock_event); 363 hv_clock_event = NULL; 364 365 } 366 EXPORT_SYMBOL_GPL(hv_stimer_global_cleanup); 367 368 static __always_inline u64 read_hv_clock_msr(void) 369 { 370 /* 371 * Read the partition counter to get the current tick count. This count 372 * is set to 0 when the partition is created and is incremented in 100 373 * nanosecond units. 374 * 375 * Use hv_raw_get_register() because this function is used from 376 * noinstr. Notable; while HV_REGISTER_TIME_REF_COUNT is a synthetic 377 * register it doesn't need the GHCB path. 378 */ 379 return hv_raw_get_register(HV_REGISTER_TIME_REF_COUNT); 380 } 381 382 /* 383 * Code and definitions for the Hyper-V clocksources. Two 384 * clocksources are defined: one that reads the Hyper-V defined MSR, and 385 * the other that uses the TSC reference page feature as defined in the 386 * TLFS. The MSR version is for compatibility with old versions of 387 * Hyper-V and 32-bit x86. The TSC reference page version is preferred. 388 */ 389 390 static union { 391 struct ms_hyperv_tsc_page page; 392 u8 reserved[PAGE_SIZE]; 393 } tsc_pg __bss_decrypted __aligned(PAGE_SIZE); 394 395 static struct ms_hyperv_tsc_page *tsc_page = &tsc_pg.page; 396 static unsigned long tsc_pfn; 397 398 unsigned long hv_get_tsc_pfn(void) 399 { 400 return tsc_pfn; 401 } 402 EXPORT_SYMBOL_GPL(hv_get_tsc_pfn); 403 404 struct ms_hyperv_tsc_page *hv_get_tsc_page(void) 405 { 406 return tsc_page; 407 } 408 EXPORT_SYMBOL_GPL(hv_get_tsc_page); 409 410 static __always_inline u64 read_hv_clock_tsc(void) 411 { 412 u64 cur_tsc, time; 413 414 /* 415 * The Hyper-V Top-Level Function Spec (TLFS), section Timers, 416 * subsection Refererence Counter, guarantees that the TSC and MSR 417 * times are in sync and monotonic. Therefore we can fall back 418 * to the MSR in case the TSC page indicates unavailability. 419 */ 420 if (!hv_read_tsc_page_tsc(tsc_page, &cur_tsc, &time)) 421 time = read_hv_clock_msr(); 422 423 return time; 424 } 425 426 static u64 notrace read_hv_clock_tsc_cs(struct clocksource *arg) 427 { 428 return read_hv_clock_tsc(); 429 } 430 431 static u64 noinstr read_hv_sched_clock_tsc(void) 432 { 433 return (read_hv_clock_tsc() - hv_sched_clock_offset) * 434 (NSEC_PER_SEC / HV_CLOCK_HZ); 435 } 436 437 static void suspend_hv_clock_tsc(struct clocksource *arg) 438 { 439 union hv_reference_tsc_msr tsc_msr; 440 441 /* Disable the TSC page */ 442 tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC); 443 tsc_msr.enable = 0; 444 hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64); 445 } 446 447 448 static void resume_hv_clock_tsc(struct clocksource *arg) 449 { 450 union hv_reference_tsc_msr tsc_msr; 451 452 /* Re-enable the TSC page */ 453 tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC); 454 tsc_msr.enable = 1; 455 tsc_msr.pfn = tsc_pfn; 456 hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64); 457 } 458 459 #ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK 460 static int hv_cs_enable(struct clocksource *cs) 461 { 462 vclocks_set_used(VDSO_CLOCKMODE_HVCLOCK); 463 return 0; 464 } 465 #endif 466 467 static struct clocksource hyperv_cs_tsc = { 468 .name = "hyperv_clocksource_tsc_page", 469 .rating = 500, 470 .read = read_hv_clock_tsc_cs, 471 .mask = CLOCKSOURCE_MASK(64), 472 .flags = CLOCK_SOURCE_IS_CONTINUOUS, 473 .suspend= suspend_hv_clock_tsc, 474 .resume = resume_hv_clock_tsc, 475 #ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK 476 .enable = hv_cs_enable, 477 .vdso_clock_mode = VDSO_CLOCKMODE_HVCLOCK, 478 #else 479 .vdso_clock_mode = VDSO_CLOCKMODE_NONE, 480 #endif 481 }; 482 483 static u64 notrace read_hv_clock_msr_cs(struct clocksource *arg) 484 { 485 return read_hv_clock_msr(); 486 } 487 488 static struct clocksource hyperv_cs_msr = { 489 .name = "hyperv_clocksource_msr", 490 .rating = 495, 491 .read = read_hv_clock_msr_cs, 492 .mask = CLOCKSOURCE_MASK(64), 493 .flags = CLOCK_SOURCE_IS_CONTINUOUS, 494 }; 495 496 /* 497 * Reference to pv_ops must be inline so objtool 498 * detection of noinstr violations can work correctly. 499 */ 500 #ifdef CONFIG_GENERIC_SCHED_CLOCK 501 static __always_inline void hv_setup_sched_clock(void *sched_clock) 502 { 503 /* 504 * We're on an architecture with generic sched clock (not x86/x64). 505 * The Hyper-V sched clock read function returns nanoseconds, not 506 * the normal 100ns units of the Hyper-V synthetic clock. 507 */ 508 sched_clock_register(sched_clock, 64, NSEC_PER_SEC); 509 } 510 #elif defined CONFIG_PARAVIRT 511 static __always_inline void hv_setup_sched_clock(void *sched_clock) 512 { 513 /* We're on x86/x64 *and* using PV ops */ 514 paravirt_set_sched_clock(sched_clock); 515 } 516 #else /* !CONFIG_GENERIC_SCHED_CLOCK && !CONFIG_PARAVIRT */ 517 static __always_inline void hv_setup_sched_clock(void *sched_clock) {} 518 #endif /* CONFIG_GENERIC_SCHED_CLOCK */ 519 520 static void __init hv_init_tsc_clocksource(void) 521 { 522 union hv_reference_tsc_msr tsc_msr; 523 524 /* 525 * If Hyper-V offers TSC_INVARIANT, then the virtualized TSC correctly 526 * handles frequency and offset changes due to live migration, 527 * pause/resume, and other VM management operations. So lower the 528 * Hyper-V Reference TSC rating, causing the generic TSC to be used. 529 * TSC_INVARIANT is not offered on ARM64, so the Hyper-V Reference 530 * TSC will be preferred over the virtualized ARM64 arch counter. 531 */ 532 if (ms_hyperv.features & HV_ACCESS_TSC_INVARIANT) { 533 hyperv_cs_tsc.rating = 250; 534 hyperv_cs_msr.rating = 245; 535 } 536 537 if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE)) 538 return; 539 540 hv_read_reference_counter = read_hv_clock_tsc; 541 542 /* 543 * TSC page mapping works differently in root compared to guest. 544 * - In guest partition the guest PFN has to be passed to the 545 * hypervisor. 546 * - In root partition it's other way around: it has to map the PFN 547 * provided by the hypervisor. 548 * But it can't be mapped right here as it's too early and MMU isn't 549 * ready yet. So, we only set the enable bit here and will remap the 550 * page later in hv_remap_tsc_clocksource(). 551 * 552 * It worth mentioning, that TSC clocksource read function 553 * (read_hv_clock_tsc) has a MSR-based fallback mechanism, used when 554 * TSC page is zeroed (which is the case until the PFN is remapped) and 555 * thus TSC clocksource will work even without the real TSC page 556 * mapped. 557 */ 558 tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC); 559 if (hv_root_partition) 560 tsc_pfn = tsc_msr.pfn; 561 else 562 tsc_pfn = HVPFN_DOWN(virt_to_phys(tsc_page)); 563 tsc_msr.enable = 1; 564 tsc_msr.pfn = tsc_pfn; 565 hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64); 566 567 clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100); 568 569 /* 570 * If TSC is invariant, then let it stay as the sched clock since it 571 * will be faster than reading the TSC page. But if not invariant, use 572 * the TSC page so that live migrations across hosts with different 573 * frequencies is handled correctly. 574 */ 575 if (!(ms_hyperv.features & HV_ACCESS_TSC_INVARIANT)) { 576 hv_sched_clock_offset = hv_read_reference_counter(); 577 hv_setup_sched_clock(read_hv_sched_clock_tsc); 578 } 579 } 580 581 void __init hv_init_clocksource(void) 582 { 583 /* 584 * Try to set up the TSC page clocksource, then the MSR clocksource. 585 * At least one of these will always be available except on very old 586 * versions of Hyper-V on x86. In that case we won't have a Hyper-V 587 * clocksource, but Linux will still run with a clocksource based 588 * on the emulated PIT or LAPIC timer. 589 * 590 * Never use the MSR clocksource as sched clock. It's too slow. 591 * Better to use the native sched clock as the fallback. 592 */ 593 hv_init_tsc_clocksource(); 594 595 if (ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE) 596 clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100); 597 } 598 599 void __init hv_remap_tsc_clocksource(void) 600 { 601 if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE)) 602 return; 603 604 if (!hv_root_partition) { 605 WARN(1, "%s: attempt to remap TSC page in guest partition\n", 606 __func__); 607 return; 608 } 609 610 tsc_page = memremap(tsc_pfn << HV_HYP_PAGE_SHIFT, sizeof(tsc_pg), 611 MEMREMAP_WB); 612 if (!tsc_page) 613 pr_err("Failed to remap Hyper-V TSC page.\n"); 614 } 615