xref: /openbmc/linux/drivers/clk/ux500/abx500-clk.c (revision c819e2cf)
1 /*
2  * abx500 clock implementation for ux500 platform.
3  *
4  * Copyright (C) 2012 ST-Ericsson SA
5  * Author: Ulf Hansson <ulf.hansson@linaro.org>
6  *
7  * License terms: GNU General Public License (GPL) version 2
8  */
9 
10 #include <linux/err.h>
11 #include <linux/module.h>
12 #include <linux/device.h>
13 #include <linux/platform_device.h>
14 #include <linux/mfd/abx500/ab8500.h>
15 #include <linux/mfd/abx500/ab8500-sysctrl.h>
16 #include <linux/clk.h>
17 #include <linux/clkdev.h>
18 #include <linux/clk-provider.h>
19 #include <linux/mfd/dbx500-prcmu.h>
20 #include "clk.h"
21 
22 /* Clock definitions for ab8500 */
23 static int ab8500_reg_clks(struct device *dev)
24 {
25 	int ret;
26 	struct clk *clk;
27 
28 	const char *intclk_parents[] = {"ab8500_sysclk", "ulpclk"};
29 	u16 intclk_reg_sel[] = {0 , AB8500_SYSULPCLKCTRL1};
30 	u8 intclk_reg_mask[] = {0 , AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK};
31 	u8 intclk_reg_bits[] = {
32 		0 ,
33 		(1 << AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT)
34 	};
35 
36 	dev_info(dev, "register clocks for ab850x\n");
37 
38 	/* Enable SWAT */
39 	ret = ab8500_sysctrl_set(AB8500_SWATCTRL, AB8500_SWATCTRL_SWATENABLE);
40 	if (ret)
41 		return ret;
42 
43 	/* ab8500_sysclk */
44 	clk = clk_reg_prcmu_gate("ab8500_sysclk", NULL, PRCMU_SYSCLK,
45 				CLK_IS_ROOT);
46 	clk_register_clkdev(clk, "sysclk", "ab8500-usb.0");
47 	clk_register_clkdev(clk, "sysclk", "ab-iddet.0");
48 	clk_register_clkdev(clk, "sysclk", "snd-soc-mop500.0");
49 	clk_register_clkdev(clk, "sysclk", "shrm_bus");
50 
51 	/* ab8500_sysclk2 */
52 	clk = clk_reg_sysctrl_gate(dev , "ab8500_sysclk2", "ab8500_sysclk",
53 		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ,
54 		AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ, 0, 0);
55 	clk_register_clkdev(clk, "sysclk", "0-0070");
56 
57 	/* ab8500_sysclk3 */
58 	clk = clk_reg_sysctrl_gate(dev , "ab8500_sysclk3", "ab8500_sysclk",
59 		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ,
60 		AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ, 0, 0);
61 	clk_register_clkdev(clk, "sysclk", "cg1960_core.0");
62 
63 	/* ab8500_sysclk4 */
64 	clk = clk_reg_sysctrl_gate(dev , "ab8500_sysclk4", "ab8500_sysclk",
65 		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ,
66 		AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ, 0, 0);
67 
68 	/* ab_ulpclk */
69 	clk = clk_reg_sysctrl_gate_fixed_rate(dev, "ulpclk", NULL,
70 		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_ULPCLKREQ,
71 		AB8500_SYSULPCLKCTRL1_ULPCLKREQ,
72 		38400000, 9000, CLK_IS_ROOT);
73 	clk_register_clkdev(clk, "ulpclk", "snd-soc-mop500.0");
74 
75 	/* ab8500_intclk */
76 	clk = clk_reg_sysctrl_set_parent(dev , "intclk", intclk_parents, 2,
77 		intclk_reg_sel, intclk_reg_mask, intclk_reg_bits, 0);
78 	clk_register_clkdev(clk, "intclk", "snd-soc-mop500.0");
79 	clk_register_clkdev(clk, NULL, "ab8500-pwm.1");
80 
81 	/* ab8500_audioclk */
82 	clk = clk_reg_sysctrl_gate(dev , "audioclk", "intclk",
83 		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_AUDIOCLKENA,
84 		AB8500_SYSULPCLKCTRL1_AUDIOCLKENA, 0, 0);
85 	clk_register_clkdev(clk, "audioclk", "ab8500-codec.0");
86 
87 	return 0;
88 }
89 
90 /* Clock definitions for ab8540 */
91 static int ab8540_reg_clks(struct device *dev)
92 {
93 	return 0;
94 }
95 
96 /* Clock definitions for ab9540 */
97 static int ab9540_reg_clks(struct device *dev)
98 {
99 	return 0;
100 }
101 
102 static int abx500_clk_probe(struct platform_device *pdev)
103 {
104 	struct ab8500 *parent = dev_get_drvdata(pdev->dev.parent);
105 	int ret;
106 
107 	if (is_ab8500(parent) || is_ab8505(parent)) {
108 		ret = ab8500_reg_clks(&pdev->dev);
109 	} else if (is_ab8540(parent)) {
110 		ret = ab8540_reg_clks(&pdev->dev);
111 	} else if (is_ab9540(parent)) {
112 		ret = ab9540_reg_clks(&pdev->dev);
113 	} else {
114 		dev_err(&pdev->dev, "non supported plf id\n");
115 		return -ENODEV;
116 	}
117 
118 	return ret;
119 }
120 
121 static struct platform_driver abx500_clk_driver = {
122 	.driver = {
123 		.name = "abx500-clk",
124 	},
125 	.probe	= abx500_clk_probe,
126 };
127 
128 static int __init abx500_clk_init(void)
129 {
130 	return platform_driver_register(&abx500_clk_driver);
131 }
132 
133 arch_initcall(abx500_clk_init);
134 
135 MODULE_AUTHOR("Ulf Hansson <ulf.hansson@linaro.org");
136 MODULE_DESCRIPTION("ABX500 clk driver");
137 MODULE_LICENSE("GPL v2");
138