1 /* 2 * OMAP DPLL clock support 3 * 4 * Copyright (C) 2013 Texas Instruments, Inc. 5 * 6 * Tero Kristo <t-kristo@ti.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 13 * kind, whether express or implied; without even the implied warranty 14 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 */ 17 18 #include <linux/clk-provider.h> 19 #include <linux/slab.h> 20 #include <linux/err.h> 21 #include <linux/of.h> 22 #include <linux/of_address.h> 23 #include <linux/clk/ti.h> 24 #include "clock.h" 25 26 #undef pr_fmt 27 #define pr_fmt(fmt) "%s: " fmt, __func__ 28 29 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ 30 defined(CONFIG_SOC_DRA7XX) 31 static const struct clk_ops dpll_m4xen_ck_ops = { 32 .enable = &omap3_noncore_dpll_enable, 33 .disable = &omap3_noncore_dpll_disable, 34 .recalc_rate = &omap4_dpll_regm4xen_recalc, 35 .round_rate = &omap4_dpll_regm4xen_round_rate, 36 .set_rate = &omap3_noncore_dpll_set_rate, 37 .set_parent = &omap3_noncore_dpll_set_parent, 38 .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, 39 .determine_rate = &omap4_dpll_regm4xen_determine_rate, 40 .get_parent = &omap2_init_dpll_parent, 41 }; 42 #else 43 static const struct clk_ops dpll_m4xen_ck_ops = {}; 44 #endif 45 46 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \ 47 defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) || \ 48 defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) 49 static const struct clk_ops dpll_core_ck_ops = { 50 .recalc_rate = &omap3_dpll_recalc, 51 .get_parent = &omap2_init_dpll_parent, 52 }; 53 54 static const struct clk_ops dpll_ck_ops = { 55 .enable = &omap3_noncore_dpll_enable, 56 .disable = &omap3_noncore_dpll_disable, 57 .recalc_rate = &omap3_dpll_recalc, 58 .round_rate = &omap2_dpll_round_rate, 59 .set_rate = &omap3_noncore_dpll_set_rate, 60 .set_parent = &omap3_noncore_dpll_set_parent, 61 .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, 62 .determine_rate = &omap3_noncore_dpll_determine_rate, 63 .get_parent = &omap2_init_dpll_parent, 64 }; 65 66 static const struct clk_ops dpll_no_gate_ck_ops = { 67 .recalc_rate = &omap3_dpll_recalc, 68 .get_parent = &omap2_init_dpll_parent, 69 .round_rate = &omap2_dpll_round_rate, 70 .set_rate = &omap3_noncore_dpll_set_rate, 71 .set_parent = &omap3_noncore_dpll_set_parent, 72 .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, 73 .determine_rate = &omap3_noncore_dpll_determine_rate, 74 }; 75 #else 76 static const struct clk_ops dpll_core_ck_ops = {}; 77 static const struct clk_ops dpll_ck_ops = {}; 78 static const struct clk_ops dpll_no_gate_ck_ops = {}; 79 const struct clk_hw_omap_ops clkhwops_omap3_dpll = {}; 80 #endif 81 82 #ifdef CONFIG_ARCH_OMAP2 83 static const struct clk_ops omap2_dpll_core_ck_ops = { 84 .get_parent = &omap2_init_dpll_parent, 85 .recalc_rate = &omap2_dpllcore_recalc, 86 .round_rate = &omap2_dpll_round_rate, 87 .set_rate = &omap2_reprogram_dpllcore, 88 }; 89 #else 90 static const struct clk_ops omap2_dpll_core_ck_ops = {}; 91 #endif 92 93 #ifdef CONFIG_ARCH_OMAP3 94 static const struct clk_ops omap3_dpll_core_ck_ops = { 95 .get_parent = &omap2_init_dpll_parent, 96 .recalc_rate = &omap3_dpll_recalc, 97 .round_rate = &omap2_dpll_round_rate, 98 }; 99 #else 100 static const struct clk_ops omap3_dpll_core_ck_ops = {}; 101 #endif 102 103 #ifdef CONFIG_ARCH_OMAP3 104 static const struct clk_ops omap3_dpll_ck_ops = { 105 .enable = &omap3_noncore_dpll_enable, 106 .disable = &omap3_noncore_dpll_disable, 107 .get_parent = &omap2_init_dpll_parent, 108 .recalc_rate = &omap3_dpll_recalc, 109 .set_rate = &omap3_noncore_dpll_set_rate, 110 .set_parent = &omap3_noncore_dpll_set_parent, 111 .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, 112 .determine_rate = &omap3_noncore_dpll_determine_rate, 113 .round_rate = &omap2_dpll_round_rate, 114 }; 115 116 static const struct clk_ops omap3_dpll_per_ck_ops = { 117 .enable = &omap3_noncore_dpll_enable, 118 .disable = &omap3_noncore_dpll_disable, 119 .get_parent = &omap2_init_dpll_parent, 120 .recalc_rate = &omap3_dpll_recalc, 121 .set_rate = &omap3_dpll4_set_rate, 122 .set_parent = &omap3_noncore_dpll_set_parent, 123 .set_rate_and_parent = &omap3_dpll4_set_rate_and_parent, 124 .determine_rate = &omap3_noncore_dpll_determine_rate, 125 .round_rate = &omap2_dpll_round_rate, 126 }; 127 #endif 128 129 static const struct clk_ops dpll_x2_ck_ops = { 130 .recalc_rate = &omap3_clkoutx2_recalc, 131 }; 132 133 /** 134 * _register_dpll - low level registration of a DPLL clock 135 * @hw: hardware clock definition for the clock 136 * @node: device node for the clock 137 * 138 * Finalizes DPLL registration process. In case a failure (clk-ref or 139 * clk-bypass is missing), the clock is added to retry list and 140 * the initialization is retried on later stage. 141 */ 142 static void __init _register_dpll(struct clk_hw *hw, 143 struct device_node *node) 144 { 145 struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw); 146 struct dpll_data *dd = clk_hw->dpll_data; 147 struct clk *clk; 148 149 dd->clk_ref = of_clk_get(node, 0); 150 dd->clk_bypass = of_clk_get(node, 1); 151 152 if (IS_ERR(dd->clk_ref) || IS_ERR(dd->clk_bypass)) { 153 pr_debug("clk-ref or clk-bypass missing for %s, retry later\n", 154 node->name); 155 if (!ti_clk_retry_init(node, hw, _register_dpll)) 156 return; 157 158 goto cleanup; 159 } 160 161 /* register the clock */ 162 clk = clk_register(NULL, &clk_hw->hw); 163 164 if (!IS_ERR(clk)) { 165 omap2_init_clk_hw_omap_clocks(clk); 166 of_clk_add_provider(node, of_clk_src_simple_get, clk); 167 kfree(clk_hw->hw.init->parent_names); 168 kfree(clk_hw->hw.init); 169 return; 170 } 171 172 cleanup: 173 kfree(clk_hw->dpll_data); 174 kfree(clk_hw->hw.init->parent_names); 175 kfree(clk_hw->hw.init); 176 kfree(clk_hw); 177 } 178 179 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_ATAGS) 180 void __iomem *_get_reg(u8 module, u16 offset) 181 { 182 u32 reg; 183 struct clk_omap_reg *reg_setup; 184 185 reg_setup = (struct clk_omap_reg *)® 186 187 reg_setup->index = module; 188 reg_setup->offset = offset; 189 190 return (void __iomem *)reg; 191 } 192 193 struct clk *ti_clk_register_dpll(struct ti_clk *setup) 194 { 195 struct clk_hw_omap *clk_hw; 196 struct clk_init_data init = { NULL }; 197 struct dpll_data *dd; 198 struct clk *clk; 199 struct ti_clk_dpll *dpll; 200 const struct clk_ops *ops = &omap3_dpll_ck_ops; 201 struct clk *clk_ref; 202 struct clk *clk_bypass; 203 204 dpll = setup->data; 205 206 if (dpll->num_parents < 2) 207 return ERR_PTR(-EINVAL); 208 209 clk_ref = clk_get_sys(NULL, dpll->parents[0]); 210 clk_bypass = clk_get_sys(NULL, dpll->parents[1]); 211 212 if (IS_ERR_OR_NULL(clk_ref) || IS_ERR_OR_NULL(clk_bypass)) 213 return ERR_PTR(-EAGAIN); 214 215 dd = kzalloc(sizeof(*dd), GFP_KERNEL); 216 clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); 217 if (!dd || !clk_hw) { 218 clk = ERR_PTR(-ENOMEM); 219 goto cleanup; 220 } 221 222 clk_hw->dpll_data = dd; 223 clk_hw->ops = &clkhwops_omap3_dpll; 224 clk_hw->hw.init = &init; 225 clk_hw->flags = MEMMAP_ADDRESSING; 226 227 init.name = setup->name; 228 init.ops = ops; 229 230 init.num_parents = dpll->num_parents; 231 init.parent_names = dpll->parents; 232 233 dd->control_reg = _get_reg(dpll->module, dpll->control_reg); 234 dd->idlest_reg = _get_reg(dpll->module, dpll->idlest_reg); 235 dd->mult_div1_reg = _get_reg(dpll->module, dpll->mult_div1_reg); 236 dd->autoidle_reg = _get_reg(dpll->module, dpll->autoidle_reg); 237 238 dd->modes = dpll->modes; 239 dd->div1_mask = dpll->div1_mask; 240 dd->idlest_mask = dpll->idlest_mask; 241 dd->mult_mask = dpll->mult_mask; 242 dd->autoidle_mask = dpll->autoidle_mask; 243 dd->enable_mask = dpll->enable_mask; 244 dd->sddiv_mask = dpll->sddiv_mask; 245 dd->dco_mask = dpll->dco_mask; 246 dd->max_divider = dpll->max_divider; 247 dd->min_divider = dpll->min_divider; 248 dd->max_multiplier = dpll->max_multiplier; 249 dd->auto_recal_bit = dpll->auto_recal_bit; 250 dd->recal_en_bit = dpll->recal_en_bit; 251 dd->recal_st_bit = dpll->recal_st_bit; 252 253 dd->clk_ref = clk_ref; 254 dd->clk_bypass = clk_bypass; 255 256 if (dpll->flags & CLKF_CORE) 257 ops = &omap3_dpll_core_ck_ops; 258 259 if (dpll->flags & CLKF_PER) 260 ops = &omap3_dpll_per_ck_ops; 261 262 if (dpll->flags & CLKF_J_TYPE) 263 dd->flags |= DPLL_J_TYPE; 264 265 clk = clk_register(NULL, &clk_hw->hw); 266 267 if (!IS_ERR(clk)) 268 return clk; 269 270 cleanup: 271 kfree(dd); 272 kfree(clk_hw); 273 return clk; 274 } 275 #endif 276 277 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ 278 defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \ 279 defined(CONFIG_SOC_AM43XX) 280 /** 281 * _register_dpll_x2 - Registers a DPLLx2 clock 282 * @node: device node for this clock 283 * @ops: clk_ops for this clock 284 * @hw_ops: clk_hw_ops for this clock 285 * 286 * Initializes a DPLL x 2 clock from device tree data. 287 */ 288 static void _register_dpll_x2(struct device_node *node, 289 const struct clk_ops *ops, 290 const struct clk_hw_omap_ops *hw_ops) 291 { 292 struct clk *clk; 293 struct clk_init_data init = { NULL }; 294 struct clk_hw_omap *clk_hw; 295 const char *name = node->name; 296 const char *parent_name; 297 298 parent_name = of_clk_get_parent_name(node, 0); 299 if (!parent_name) { 300 pr_err("%s must have parent\n", node->name); 301 return; 302 } 303 304 clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); 305 if (!clk_hw) 306 return; 307 308 clk_hw->ops = hw_ops; 309 clk_hw->hw.init = &init; 310 311 init.name = name; 312 init.ops = ops; 313 init.parent_names = &parent_name; 314 init.num_parents = 1; 315 316 /* register the clock */ 317 clk = clk_register(NULL, &clk_hw->hw); 318 319 if (IS_ERR(clk)) { 320 kfree(clk_hw); 321 } else { 322 omap2_init_clk_hw_omap_clocks(clk); 323 of_clk_add_provider(node, of_clk_src_simple_get, clk); 324 } 325 } 326 #endif 327 328 /** 329 * of_ti_dpll_setup - Setup function for OMAP DPLL clocks 330 * @node: device node containing the DPLL info 331 * @ops: ops for the DPLL 332 * @ddt: DPLL data template to use 333 * 334 * Initializes a DPLL clock from device tree data. 335 */ 336 static void __init of_ti_dpll_setup(struct device_node *node, 337 const struct clk_ops *ops, 338 const struct dpll_data *ddt) 339 { 340 struct clk_hw_omap *clk_hw = NULL; 341 struct clk_init_data *init = NULL; 342 const char **parent_names = NULL; 343 struct dpll_data *dd = NULL; 344 int i; 345 u8 dpll_mode = 0; 346 347 dd = kzalloc(sizeof(*dd), GFP_KERNEL); 348 clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); 349 init = kzalloc(sizeof(*init), GFP_KERNEL); 350 if (!dd || !clk_hw || !init) 351 goto cleanup; 352 353 memcpy(dd, ddt, sizeof(*dd)); 354 355 clk_hw->dpll_data = dd; 356 clk_hw->ops = &clkhwops_omap3_dpll; 357 clk_hw->hw.init = init; 358 clk_hw->flags = MEMMAP_ADDRESSING; 359 360 init->name = node->name; 361 init->ops = ops; 362 363 init->num_parents = of_clk_get_parent_count(node); 364 if (init->num_parents < 1) { 365 pr_err("%s must have parent(s)\n", node->name); 366 goto cleanup; 367 } 368 369 parent_names = kzalloc(sizeof(char *) * init->num_parents, GFP_KERNEL); 370 if (!parent_names) 371 goto cleanup; 372 373 for (i = 0; i < init->num_parents; i++) 374 parent_names[i] = of_clk_get_parent_name(node, i); 375 376 init->parent_names = parent_names; 377 378 dd->control_reg = ti_clk_get_reg_addr(node, 0); 379 380 /* 381 * Special case for OMAP2 DPLL, register order is different due to 382 * missing idlest_reg, also clkhwops is different. Detected from 383 * missing idlest_mask. 384 */ 385 if (!dd->idlest_mask) { 386 dd->mult_div1_reg = ti_clk_get_reg_addr(node, 1); 387 #ifdef CONFIG_ARCH_OMAP2 388 clk_hw->ops = &clkhwops_omap2xxx_dpll; 389 omap2xxx_clkt_dpllcore_init(&clk_hw->hw); 390 #endif 391 } else { 392 dd->idlest_reg = ti_clk_get_reg_addr(node, 1); 393 if (!dd->idlest_reg) 394 goto cleanup; 395 396 dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2); 397 } 398 399 if (!dd->control_reg || !dd->mult_div1_reg) 400 goto cleanup; 401 402 if (dd->autoidle_mask) { 403 dd->autoidle_reg = ti_clk_get_reg_addr(node, 3); 404 if (!dd->autoidle_reg) 405 goto cleanup; 406 } 407 408 if (of_property_read_bool(node, "ti,low-power-stop")) 409 dpll_mode |= 1 << DPLL_LOW_POWER_STOP; 410 411 if (of_property_read_bool(node, "ti,low-power-bypass")) 412 dpll_mode |= 1 << DPLL_LOW_POWER_BYPASS; 413 414 if (of_property_read_bool(node, "ti,lock")) 415 dpll_mode |= 1 << DPLL_LOCKED; 416 417 if (dpll_mode) 418 dd->modes = dpll_mode; 419 420 _register_dpll(&clk_hw->hw, node); 421 return; 422 423 cleanup: 424 kfree(dd); 425 kfree(parent_names); 426 kfree(init); 427 kfree(clk_hw); 428 } 429 430 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ 431 defined(CONFIG_SOC_DRA7XX) 432 static void __init of_ti_omap4_dpll_x2_setup(struct device_node *node) 433 { 434 _register_dpll_x2(node, &dpll_x2_ck_ops, &clkhwops_omap4_dpllmx); 435 } 436 CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock", 437 of_ti_omap4_dpll_x2_setup); 438 #endif 439 440 #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) 441 static void __init of_ti_am3_dpll_x2_setup(struct device_node *node) 442 { 443 _register_dpll_x2(node, &dpll_x2_ck_ops, NULL); 444 } 445 CLK_OF_DECLARE(ti_am3_dpll_x2_clock, "ti,am3-dpll-x2-clock", 446 of_ti_am3_dpll_x2_setup); 447 #endif 448 449 #ifdef CONFIG_ARCH_OMAP3 450 static void __init of_ti_omap3_dpll_setup(struct device_node *node) 451 { 452 const struct dpll_data dd = { 453 .idlest_mask = 0x1, 454 .enable_mask = 0x7, 455 .autoidle_mask = 0x7, 456 .mult_mask = 0x7ff << 8, 457 .div1_mask = 0x7f, 458 .max_multiplier = 2047, 459 .max_divider = 128, 460 .min_divider = 1, 461 .freqsel_mask = 0xf0, 462 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 463 }; 464 465 of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd); 466 } 467 CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock", 468 of_ti_omap3_dpll_setup); 469 470 static void __init of_ti_omap3_core_dpll_setup(struct device_node *node) 471 { 472 const struct dpll_data dd = { 473 .idlest_mask = 0x1, 474 .enable_mask = 0x7, 475 .autoidle_mask = 0x7, 476 .mult_mask = 0x7ff << 16, 477 .div1_mask = 0x7f << 8, 478 .max_multiplier = 2047, 479 .max_divider = 128, 480 .min_divider = 1, 481 .freqsel_mask = 0xf0, 482 }; 483 484 of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd); 485 } 486 CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock", 487 of_ti_omap3_core_dpll_setup); 488 489 static void __init of_ti_omap3_per_dpll_setup(struct device_node *node) 490 { 491 const struct dpll_data dd = { 492 .idlest_mask = 0x1 << 1, 493 .enable_mask = 0x7 << 16, 494 .autoidle_mask = 0x7 << 3, 495 .mult_mask = 0x7ff << 8, 496 .div1_mask = 0x7f, 497 .max_multiplier = 2047, 498 .max_divider = 128, 499 .min_divider = 1, 500 .freqsel_mask = 0xf00000, 501 .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), 502 }; 503 504 of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); 505 } 506 CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock", 507 of_ti_omap3_per_dpll_setup); 508 509 static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node) 510 { 511 const struct dpll_data dd = { 512 .idlest_mask = 0x1 << 1, 513 .enable_mask = 0x7 << 16, 514 .autoidle_mask = 0x7 << 3, 515 .mult_mask = 0xfff << 8, 516 .div1_mask = 0x7f, 517 .max_multiplier = 4095, 518 .max_divider = 128, 519 .min_divider = 1, 520 .sddiv_mask = 0xff << 24, 521 .dco_mask = 0xe << 20, 522 .flags = DPLL_J_TYPE, 523 .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), 524 }; 525 526 of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); 527 } 528 CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock", 529 of_ti_omap3_per_jtype_dpll_setup); 530 #endif 531 532 static void __init of_ti_omap4_dpll_setup(struct device_node *node) 533 { 534 const struct dpll_data dd = { 535 .idlest_mask = 0x1, 536 .enable_mask = 0x7, 537 .autoidle_mask = 0x7, 538 .mult_mask = 0x7ff << 8, 539 .div1_mask = 0x7f, 540 .max_multiplier = 2047, 541 .max_divider = 128, 542 .min_divider = 1, 543 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 544 }; 545 546 of_ti_dpll_setup(node, &dpll_ck_ops, &dd); 547 } 548 CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock", 549 of_ti_omap4_dpll_setup); 550 551 static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node) 552 { 553 const struct dpll_data dd = { 554 .idlest_mask = 0x1, 555 .enable_mask = 0x7, 556 .autoidle_mask = 0x7, 557 .mult_mask = 0x7ff << 8, 558 .div1_mask = 0x7f, 559 .max_multiplier = 2047, 560 .max_divider = 128, 561 .dcc_mask = BIT(22), 562 .dcc_rate = 1400000000, /* DCC beyond 1.4GHz */ 563 .min_divider = 1, 564 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 565 }; 566 567 of_ti_dpll_setup(node, &dpll_ck_ops, &dd); 568 } 569 CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock", 570 of_ti_omap5_mpu_dpll_setup); 571 572 static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) 573 { 574 const struct dpll_data dd = { 575 .idlest_mask = 0x1, 576 .enable_mask = 0x7, 577 .autoidle_mask = 0x7, 578 .mult_mask = 0x7ff << 8, 579 .div1_mask = 0x7f, 580 .max_multiplier = 2047, 581 .max_divider = 128, 582 .min_divider = 1, 583 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 584 }; 585 586 of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd); 587 } 588 CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock", 589 of_ti_omap4_core_dpll_setup); 590 591 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ 592 defined(CONFIG_SOC_DRA7XX) 593 static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node) 594 { 595 const struct dpll_data dd = { 596 .idlest_mask = 0x1, 597 .enable_mask = 0x7, 598 .autoidle_mask = 0x7, 599 .mult_mask = 0x7ff << 8, 600 .div1_mask = 0x7f, 601 .max_multiplier = 2047, 602 .max_divider = 128, 603 .min_divider = 1, 604 .m4xen_mask = 0x800, 605 .lpmode_mask = 1 << 10, 606 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 607 }; 608 609 of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd); 610 } 611 CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock", 612 of_ti_omap4_m4xen_dpll_setup); 613 614 static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node) 615 { 616 const struct dpll_data dd = { 617 .idlest_mask = 0x1, 618 .enable_mask = 0x7, 619 .autoidle_mask = 0x7, 620 .mult_mask = 0xfff << 8, 621 .div1_mask = 0xff, 622 .max_multiplier = 4095, 623 .max_divider = 256, 624 .min_divider = 1, 625 .sddiv_mask = 0xff << 24, 626 .flags = DPLL_J_TYPE, 627 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 628 }; 629 630 of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd); 631 } 632 CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock", 633 of_ti_omap4_jtype_dpll_setup); 634 #endif 635 636 static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) 637 { 638 const struct dpll_data dd = { 639 .idlest_mask = 0x1, 640 .enable_mask = 0x7, 641 .mult_mask = 0x7ff << 8, 642 .div1_mask = 0x7f, 643 .max_multiplier = 2047, 644 .max_divider = 128, 645 .min_divider = 1, 646 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 647 }; 648 649 of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd); 650 } 651 CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock", 652 of_ti_am3_no_gate_dpll_setup); 653 654 static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node) 655 { 656 const struct dpll_data dd = { 657 .idlest_mask = 0x1, 658 .enable_mask = 0x7, 659 .mult_mask = 0x7ff << 8, 660 .div1_mask = 0x7f, 661 .max_multiplier = 4095, 662 .max_divider = 256, 663 .min_divider = 2, 664 .flags = DPLL_J_TYPE, 665 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 666 }; 667 668 of_ti_dpll_setup(node, &dpll_ck_ops, &dd); 669 } 670 CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock", 671 of_ti_am3_jtype_dpll_setup); 672 673 static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node) 674 { 675 const struct dpll_data dd = { 676 .idlest_mask = 0x1, 677 .enable_mask = 0x7, 678 .mult_mask = 0x7ff << 8, 679 .div1_mask = 0x7f, 680 .max_multiplier = 2047, 681 .max_divider = 128, 682 .min_divider = 1, 683 .flags = DPLL_J_TYPE, 684 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 685 }; 686 687 of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd); 688 } 689 CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock, 690 "ti,am3-dpll-no-gate-j-type-clock", 691 of_ti_am3_no_gate_jtype_dpll_setup); 692 693 static void __init of_ti_am3_dpll_setup(struct device_node *node) 694 { 695 const struct dpll_data dd = { 696 .idlest_mask = 0x1, 697 .enable_mask = 0x7, 698 .mult_mask = 0x7ff << 8, 699 .div1_mask = 0x7f, 700 .max_multiplier = 2047, 701 .max_divider = 128, 702 .min_divider = 1, 703 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 704 }; 705 706 of_ti_dpll_setup(node, &dpll_ck_ops, &dd); 707 } 708 CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup); 709 710 static void __init of_ti_am3_core_dpll_setup(struct device_node *node) 711 { 712 const struct dpll_data dd = { 713 .idlest_mask = 0x1, 714 .enable_mask = 0x7, 715 .mult_mask = 0x7ff << 8, 716 .div1_mask = 0x7f, 717 .max_multiplier = 2047, 718 .max_divider = 128, 719 .min_divider = 1, 720 .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), 721 }; 722 723 of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd); 724 } 725 CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock", 726 of_ti_am3_core_dpll_setup); 727 728 static void __init of_ti_omap2_core_dpll_setup(struct device_node *node) 729 { 730 const struct dpll_data dd = { 731 .enable_mask = 0x3, 732 .mult_mask = 0x3ff << 12, 733 .div1_mask = 0xf << 8, 734 .max_divider = 16, 735 .min_divider = 1, 736 }; 737 738 of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd); 739 } 740 CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock", 741 of_ti_omap2_core_dpll_setup); 742