xref: /openbmc/linux/drivers/clk/ti/clk-3xxx.c (revision a34a3ed7)
1 /*
2  * OMAP3 Clock init
3  *
4  * Copyright (C) 2013 Texas Instruments, Inc
5  *     Tero Kristo (t-kristo@ti.com)
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation version 2.
10  *
11  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
12  * kind, whether express or implied; without even the implied warranty
13  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14  * GNU General Public License for more details.
15  */
16 
17 #include <linux/kernel.h>
18 #include <linux/list.h>
19 #include <linux/clk.h>
20 #include <linux/clk-provider.h>
21 #include <linux/clk/ti.h>
22 
23 #include "clock.h"
24 
25 #define OMAP3430ES2_ST_DSS_IDLE_SHIFT			1
26 #define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT		5
27 #define OMAP3430ES2_ST_SSI_IDLE_SHIFT			8
28 
29 #define OMAP34XX_CM_IDLEST_VAL				1
30 
31 /*
32  * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
33  * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
34  * at an offset of 4 from ICK enable bit.
35  */
36 #define AM35XX_IPSS_ICK_MASK			0xF
37 #define AM35XX_IPSS_ICK_EN_ACK_OFFSET		0x4
38 #define AM35XX_IPSS_ICK_FCK_OFFSET		0x8
39 #define AM35XX_IPSS_CLK_IDLEST_VAL		0
40 
41 #define AM35XX_ST_IPSS_SHIFT			5
42 
43 /**
44  * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
45  * @clk: struct clk * being enabled
46  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
47  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
48  * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
49  *
50  * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
51  * from the CM_{I,F}CLKEN bit.  Pass back the correct info via
52  * @idlest_reg and @idlest_bit.  No return value.
53  */
54 static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
55 					    struct clk_omap_reg *idlest_reg,
56 					    u8 *idlest_bit,
57 					    u8 *idlest_val)
58 {
59 	memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
60 	idlest_reg->offset &= ~0xf0;
61 	idlest_reg->offset |= 0x20;
62 	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
63 	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
64 }
65 
66 const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
67 	.allow_idle	= omap2_clkt_iclk_allow_idle,
68 	.deny_idle	= omap2_clkt_iclk_deny_idle,
69 	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
70 	.find_companion	= omap2_clk_dflt_find_companion,
71 };
72 
73 /**
74  * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
75  * @clk: struct clk * being enabled
76  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
77  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
78  * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
79  *
80  * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
81  * target IDLEST bits.  For our purposes, we are concerned with the
82  * target IDLEST bits, which exist at a different bit position than
83  * the *CLKEN bit position for these modules (DSS and USBHOST) (The
84  * default find_idlest code assumes that they are at the same
85  * position.)  No return value.
86  */
87 static void
88 omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
89 					struct clk_omap_reg *idlest_reg,
90 					u8 *idlest_bit, u8 *idlest_val)
91 {
92 	memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
93 
94 	idlest_reg->offset &= ~0xf0;
95 	idlest_reg->offset |= 0x20;
96 	/* USBHOST_IDLE has same shift */
97 	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
98 	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
99 }
100 
101 const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
102 	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
103 	.find_companion	= omap2_clk_dflt_find_companion,
104 };
105 
106 const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
107 	.allow_idle	= omap2_clkt_iclk_allow_idle,
108 	.deny_idle	= omap2_clkt_iclk_deny_idle,
109 	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
110 	.find_companion	= omap2_clk_dflt_find_companion,
111 };
112 
113 /**
114  * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
115  * @clk: struct clk * being enabled
116  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
117  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
118  * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
119  *
120  * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
121  * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via
122  * @idlest_reg and @idlest_bit.  No return value.
123  */
124 static void
125 omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
126 				     struct clk_omap_reg *idlest_reg,
127 				     u8 *idlest_bit,
128 				     u8 *idlest_val)
129 {
130 	memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
131 	idlest_reg->offset &= ~0xf0;
132 	idlest_reg->offset |= 0x20;
133 	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
134 	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
135 }
136 
137 const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
138 	.allow_idle	= omap2_clkt_iclk_allow_idle,
139 	.deny_idle	= omap2_clkt_iclk_deny_idle,
140 	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
141 	.find_companion	= omap2_clk_dflt_find_companion,
142 };
143 
144 /**
145  * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
146  * @clk: struct clk * being enabled
147  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
148  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
149  * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
150  *
151  * The interface clocks on AM35xx IPSS reflects the clock idle status
152  * in the enable register itsel at a bit offset of 4 from the enable
153  * bit. A value of 1 indicates that clock is enabled.
154  */
155 static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
156 				   struct clk_omap_reg *idlest_reg,
157 				   u8 *idlest_bit,
158 				   u8 *idlest_val)
159 {
160 	memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
161 	*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
162 	*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
163 }
164 
165 /**
166  * am35xx_clk_find_companion - find companion clock to @clk
167  * @clk: struct clk * to find the companion clock of
168  * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
169  * @other_bit: u8 ** to return the companion clock bit shift in
170  *
171  * Some clocks don't have companion clocks.  For example, modules with
172  * only an interface clock (such as HECC) don't have a companion
173  * clock.  Right now, this code relies on the hardware exporting a bit
174  * in the correct companion register that indicates that the
175  * nonexistent 'companion clock' is active.  Future patches will
176  * associate this type of code with per-module data structures to
177  * avoid this issue, and remove the casts.  No return value.
178  */
179 static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
180 				      struct clk_omap_reg *other_reg,
181 				      u8 *other_bit)
182 {
183 	memcpy(other_reg, &clk->enable_reg, sizeof(*other_reg));
184 	if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
185 		*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
186 	else
187 	*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
188 }
189 
190 const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
191 	.find_idlest	= am35xx_clk_find_idlest,
192 	.find_companion	= am35xx_clk_find_companion,
193 };
194 
195 /**
196  * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
197  * @clk: struct clk * being enabled
198  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
199  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
200  * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
201  *
202  * The IPSS target CM_IDLEST bit is at a different shift from the
203  * CM_{I,F}CLKEN bit.  Pass back the correct info via @idlest_reg
204  * and @idlest_bit.  No return value.
205  */
206 static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
207 					struct clk_omap_reg *idlest_reg,
208 					u8 *idlest_bit,
209 					u8 *idlest_val)
210 {
211 	memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
212 
213 	idlest_reg->offset &= ~0xf0;
214 	idlest_reg->offset |= 0x20;
215 	*idlest_bit = AM35XX_ST_IPSS_SHIFT;
216 	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
217 }
218 
219 const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
220 	.allow_idle	= omap2_clkt_iclk_allow_idle,
221 	.deny_idle	= omap2_clkt_iclk_deny_idle,
222 	.find_idlest	= am35xx_clk_ipss_find_idlest,
223 	.find_companion	= omap2_clk_dflt_find_companion,
224 };
225 
226 static struct ti_dt_clk omap3xxx_clks[] = {
227 	DT_CLK(NULL, "timer_32k_ck", "omap_32k_fck"),
228 	DT_CLK(NULL, "timer_sys_ck", "sys_ck"),
229 	{ .node_name = NULL },
230 };
231 
232 static struct ti_dt_clk omap36xx_omap3430es2plus_clks[] = {
233 	DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es2"),
234 	DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es2"),
235 	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es2"),
236 	DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es2"),
237 	{ .node_name = NULL },
238 };
239 
240 static struct ti_dt_clk omap3430es1_clks[] = {
241 	DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es1"),
242 	DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es1"),
243 	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es1"),
244 	DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es1"),
245 	DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es1"),
246 	DT_CLK(NULL, "dss_ick", "dss_ick_3430es1"),
247 	{ .node_name = NULL },
248 };
249 
250 static struct ti_dt_clk omap36xx_am35xx_omap3430es2plus_clks[] = {
251 	DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es2"),
252 	DT_CLK(NULL, "dss_ick", "dss_ick_3430es2"),
253 	{ .node_name = NULL },
254 };
255 
256 static struct ti_dt_clk am35xx_clks[] = {
257 	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_am35xx"),
258 	DT_CLK(NULL, "hsotgusb_fck", "hsotgusb_fck_am35xx"),
259 	DT_CLK(NULL, "uart4_ick", "uart4_ick_am35xx"),
260 	DT_CLK(NULL, "uart4_fck", "uart4_fck_am35xx"),
261 	{ .node_name = NULL },
262 };
263 
264 static const char *enable_init_clks[] = {
265 	"sdrc_ick",
266 	"gpmc_fck",
267 	"omapctrl_ick",
268 };
269 
270 enum {
271 	OMAP3_SOC_AM35XX,
272 	OMAP3_SOC_OMAP3430_ES1,
273 	OMAP3_SOC_OMAP3430_ES2_PLUS,
274 	OMAP3_SOC_OMAP3630,
275 };
276 
277 /**
278  * omap3_clk_lock_dpll5 - locks DPLL5
279  *
280  * Locks DPLL5 to a pre-defined frequency. This is required for proper
281  * operation of USB.
282  */
283 void __init omap3_clk_lock_dpll5(void)
284 {
285 	struct clk *dpll5_clk;
286 	struct clk *dpll5_m2_clk;
287 
288 	/*
289 	 * Errata sprz319f advisory 2.1 documents a USB host clock drift issue
290 	 * that can be worked around using specially crafted dpll5 settings
291 	 * with a dpll5_m2 divider set to 8. Set the dpll5 rate to 8x the USB
292 	 * host clock rate, its .set_rate handler() will detect that frequency
293 	 * and use the errata settings.
294 	 */
295 	dpll5_clk = clk_get(NULL, "dpll5_ck");
296 	clk_set_rate(dpll5_clk, OMAP3_DPLL5_FREQ_FOR_USBHOST * 8);
297 	clk_prepare_enable(dpll5_clk);
298 
299 	/* Program dpll5_m2_clk divider */
300 	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
301 	clk_prepare_enable(dpll5_m2_clk);
302 	clk_set_rate(dpll5_m2_clk, OMAP3_DPLL5_FREQ_FOR_USBHOST);
303 
304 	clk_disable_unprepare(dpll5_m2_clk);
305 	clk_disable_unprepare(dpll5_clk);
306 }
307 
308 static int __init omap3xxx_dt_clk_init(int soc_type)
309 {
310 	if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
311 	    soc_type == OMAP3_SOC_OMAP3430_ES1 ||
312 	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
313 		ti_dt_clocks_register(omap3xxx_clks);
314 
315 	if (soc_type == OMAP3_SOC_AM35XX)
316 		ti_dt_clocks_register(am35xx_clks);
317 
318 	if (soc_type == OMAP3_SOC_OMAP3630 || soc_type == OMAP3_SOC_AM35XX ||
319 	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
320 		ti_dt_clocks_register(omap36xx_am35xx_omap3430es2plus_clks);
321 
322 	if (soc_type == OMAP3_SOC_OMAP3430_ES1)
323 		ti_dt_clocks_register(omap3430es1_clks);
324 
325 	if (soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS ||
326 	    soc_type == OMAP3_SOC_OMAP3630)
327 		ti_dt_clocks_register(omap36xx_omap3430es2plus_clks);
328 
329 	omap2_clk_disable_autoidle_all();
330 
331 	ti_clk_add_aliases();
332 
333 	omap2_clk_enable_init_clocks(enable_init_clks,
334 				     ARRAY_SIZE(enable_init_clks));
335 
336 	pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
337 		(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 1000000),
338 		(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 100000) % 10,
339 		(clk_get_rate(clk_get_sys(NULL, "core_ck")) / 1000000),
340 		(clk_get_rate(clk_get_sys(NULL, "arm_fck")) / 1000000));
341 
342 	if (soc_type != OMAP3_SOC_OMAP3430_ES1)
343 		omap3_clk_lock_dpll5();
344 
345 	return 0;
346 }
347 
348 int __init omap3430_dt_clk_init(void)
349 {
350 	return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3430_ES2_PLUS);
351 }
352 
353 int __init omap3630_dt_clk_init(void)
354 {
355 	return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3630);
356 }
357 
358 int __init am35xx_dt_clk_init(void)
359 {
360 	return omap3xxx_dt_clk_init(OMAP3_SOC_AM35XX);
361 }
362