1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> 4 */ 5 6 #include <linux/clk-provider.h> 7 #include <linux/of_address.h> 8 #include <linux/platform_device.h> 9 10 #include "ccu_common.h" 11 #include "ccu_reset.h" 12 13 #include "ccu_div.h" 14 #include "ccu_gate.h" 15 #include "ccu_mp.h" 16 #include "ccu_nm.h" 17 18 #include "ccu-sun50i-h6-r.h" 19 20 /* 21 * Information about AR100 and AHB/APB clocks in R_CCU are gathered from 22 * clock definitions in the BSP source code. 23 */ 24 25 static const char * const ar100_r_apb2_parents[] = { "osc24M", "osc32k", 26 "iosc", "pll-periph0" }; 27 static const struct ccu_mux_var_prediv ar100_r_apb2_predivs[] = { 28 { .index = 3, .shift = 0, .width = 5 }, 29 }; 30 31 static struct ccu_div ar100_clk = { 32 .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), 33 34 .mux = { 35 .shift = 24, 36 .width = 2, 37 38 .var_predivs = ar100_r_apb2_predivs, 39 .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), 40 }, 41 42 .common = { 43 .reg = 0x000, 44 .features = CCU_FEATURE_VARIABLE_PREDIV, 45 .hw.init = CLK_HW_INIT_PARENTS("ar100", 46 ar100_r_apb2_parents, 47 &ccu_div_ops, 48 0), 49 }, 50 }; 51 52 static CLK_FIXED_FACTOR_HW(r_ahb_clk, "r-ahb", &ar100_clk.common.hw, 1, 1, 0); 53 54 static SUNXI_CCU_M(r_apb1_clk, "r-apb1", "r-ahb", 0x00c, 0, 2, 0); 55 56 static struct ccu_div r_apb2_clk = { 57 .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), 58 59 .mux = { 60 .shift = 24, 61 .width = 2, 62 63 .var_predivs = ar100_r_apb2_predivs, 64 .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), 65 }, 66 67 .common = { 68 .reg = 0x010, 69 .features = CCU_FEATURE_VARIABLE_PREDIV, 70 .hw.init = CLK_HW_INIT_PARENTS("r-apb2", 71 ar100_r_apb2_parents, 72 &ccu_div_ops, 73 0), 74 }, 75 }; 76 77 /* 78 * Information about the gate/resets are gathered from the clock header file 79 * in the BSP source code, although most of them are unused. The existence 80 * of the hardware block is verified with "3.1 Memory Mapping" chapter in 81 * "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified 82 * with "3.3.2.1 System Bus Tree" chapter inthe same document. 83 */ 84 static SUNXI_CCU_GATE(r_apb1_timer_clk, "r-apb1-timer", "r-apb1", 85 0x11c, BIT(0), 0); 86 static SUNXI_CCU_GATE(r_apb1_twd_clk, "r-apb1-twd", "r-apb1", 87 0x12c, BIT(0), 0); 88 static SUNXI_CCU_GATE(r_apb1_pwm_clk, "r-apb1-pwm", "r-apb1", 89 0x13c, BIT(0), 0); 90 static SUNXI_CCU_GATE(r_apb2_uart_clk, "r-apb2-uart", "r-apb2", 91 0x18c, BIT(0), 0); 92 static SUNXI_CCU_GATE(r_apb2_i2c_clk, "r-apb2-i2c", "r-apb2", 93 0x19c, BIT(0), 0); 94 static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1", 95 0x1cc, BIT(0), 0); 96 static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1", 97 0x1ec, BIT(0), 0); 98 99 /* Information of IR(RX) mod clock is gathered from BSP source code */ 100 static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" }; 101 static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir", 102 r_mod0_default_parents, 0x1c0, 103 0, 5, /* M */ 104 8, 2, /* P */ 105 24, 1, /* mux */ 106 BIT(31), /* gate */ 107 0); 108 109 /* 110 * BSP didn't use the 1-wire function at all now, and the information about 111 * this mod clock is guessed from the IR mod clock above. The existence of 112 * this mod clock is proven by BSP clock header, and the dividers are verified 113 * by contents in the 1-wire related chapter of the User Manual. 114 */ 115 116 static SUNXI_CCU_MP_WITH_MUX_GATE(w1_clk, "w1", 117 r_mod0_default_parents, 0x1e0, 118 0, 5, /* M */ 119 8, 2, /* P */ 120 24, 1, /* mux */ 121 BIT(31), /* gate */ 122 0); 123 124 static struct ccu_common *sun50i_h6_r_ccu_clks[] = { 125 &ar100_clk.common, 126 &r_apb1_clk.common, 127 &r_apb2_clk.common, 128 &r_apb1_timer_clk.common, 129 &r_apb1_twd_clk.common, 130 &r_apb1_pwm_clk.common, 131 &r_apb2_uart_clk.common, 132 &r_apb2_i2c_clk.common, 133 &r_apb1_ir_clk.common, 134 &r_apb1_w1_clk.common, 135 &ir_clk.common, 136 &w1_clk.common, 137 }; 138 139 static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = { 140 .hws = { 141 [CLK_AR100] = &ar100_clk.common.hw, 142 [CLK_R_AHB] = &r_ahb_clk.hw, 143 [CLK_R_APB1] = &r_apb1_clk.common.hw, 144 [CLK_R_APB2] = &r_apb2_clk.common.hw, 145 [CLK_R_APB1_TIMER] = &r_apb1_timer_clk.common.hw, 146 [CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw, 147 [CLK_R_APB1_PWM] = &r_apb1_pwm_clk.common.hw, 148 [CLK_R_APB2_UART] = &r_apb2_uart_clk.common.hw, 149 [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw, 150 [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw, 151 [CLK_R_APB1_W1] = &r_apb1_w1_clk.common.hw, 152 [CLK_IR] = &ir_clk.common.hw, 153 [CLK_W1] = &w1_clk.common.hw, 154 }, 155 .num = CLK_NUMBER, 156 }; 157 158 static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = { 159 [RST_R_APB1_TIMER] = { 0x11c, BIT(16) }, 160 [RST_R_APB1_TWD] = { 0x12c, BIT(16) }, 161 [RST_R_APB1_PWM] = { 0x13c, BIT(16) }, 162 [RST_R_APB2_UART] = { 0x18c, BIT(16) }, 163 [RST_R_APB2_I2C] = { 0x19c, BIT(16) }, 164 [RST_R_APB1_IR] = { 0x1cc, BIT(16) }, 165 [RST_R_APB1_W1] = { 0x1ec, BIT(16) }, 166 }; 167 168 static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = { 169 .ccu_clks = sun50i_h6_r_ccu_clks, 170 .num_ccu_clks = ARRAY_SIZE(sun50i_h6_r_ccu_clks), 171 172 .hw_clks = &sun50i_h6_r_hw_clks, 173 174 .resets = sun50i_h6_r_ccu_resets, 175 .num_resets = ARRAY_SIZE(sun50i_h6_r_ccu_resets), 176 }; 177 178 static void __init sunxi_r_ccu_init(struct device_node *node, 179 const struct sunxi_ccu_desc *desc) 180 { 181 void __iomem *reg; 182 183 reg = of_io_request_and_map(node, 0, of_node_full_name(node)); 184 if (IS_ERR(reg)) { 185 pr_err("%pOF: Could not map the clock registers\n", node); 186 return; 187 } 188 189 sunxi_ccu_probe(node, reg, desc); 190 } 191 192 static void __init sun50i_h6_r_ccu_setup(struct device_node *node) 193 { 194 sunxi_r_ccu_init(node, &sun50i_h6_r_ccu_desc); 195 } 196 CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu", 197 sun50i_h6_r_ccu_setup); 198