1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> 4 */ 5 6 #include <linux/clk-provider.h> 7 #include <linux/of_address.h> 8 #include <linux/platform_device.h> 9 10 #include "ccu_common.h" 11 #include "ccu_reset.h" 12 13 #include "ccu_div.h" 14 #include "ccu_gate.h" 15 #include "ccu_mp.h" 16 #include "ccu_nm.h" 17 18 #include "ccu-sun50i-h6-r.h" 19 20 /* 21 * Information about AR100 and AHB/APB clocks in R_CCU are gathered from 22 * clock definitions in the BSP source code. 23 */ 24 25 static const char * const ar100_r_apb2_parents[] = { "osc24M", "osc32k", 26 "pll-periph0", "iosc" }; 27 static const struct ccu_mux_var_prediv ar100_r_apb2_predivs[] = { 28 { .index = 2, .shift = 0, .width = 5 }, 29 }; 30 31 static struct ccu_div ar100_clk = { 32 .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), 33 34 .mux = { 35 .shift = 24, 36 .width = 2, 37 38 .var_predivs = ar100_r_apb2_predivs, 39 .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), 40 }, 41 42 .common = { 43 .reg = 0x000, 44 .features = CCU_FEATURE_VARIABLE_PREDIV, 45 .hw.init = CLK_HW_INIT_PARENTS("ar100", 46 ar100_r_apb2_parents, 47 &ccu_div_ops, 48 0), 49 }, 50 }; 51 52 static CLK_FIXED_FACTOR(r_ahb_clk, "r-ahb", "ar100", 1, 1, 0); 53 54 static struct ccu_div r_apb1_clk = { 55 .div = _SUNXI_CCU_DIV(0, 2), 56 57 .common = { 58 .reg = 0x00c, 59 .hw.init = CLK_HW_INIT("r-apb1", 60 "r-ahb", 61 &ccu_div_ops, 62 0), 63 }, 64 }; 65 66 static struct ccu_div r_apb2_clk = { 67 .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), 68 69 .mux = { 70 .shift = 24, 71 .width = 2, 72 73 .var_predivs = ar100_r_apb2_predivs, 74 .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), 75 }, 76 77 .common = { 78 .reg = 0x010, 79 .features = CCU_FEATURE_VARIABLE_PREDIV, 80 .hw.init = CLK_HW_INIT_PARENTS("r-apb2", 81 ar100_r_apb2_parents, 82 &ccu_div_ops, 83 0), 84 }, 85 }; 86 87 /* 88 * Information about the gate/resets are gathered from the clock header file 89 * in the BSP source code, although most of them are unused. The existence 90 * of the hardware block is verified with "3.1 Memory Mapping" chapter in 91 * "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified 92 * with "3.3.2.1 System Bus Tree" chapter inthe same document. 93 */ 94 static SUNXI_CCU_GATE(r_apb1_timer_clk, "r-apb1-timer", "r-apb1", 95 0x11c, BIT(0), 0); 96 static SUNXI_CCU_GATE(r_apb1_twd_clk, "r-apb1-twd", "r-apb1", 97 0x12c, BIT(0), 0); 98 static SUNXI_CCU_GATE(r_apb1_pwm_clk, "r-apb1-pwm", "r-apb1", 99 0x13c, BIT(0), 0); 100 static SUNXI_CCU_GATE(r_apb2_uart_clk, "r-apb2-uart", "r-apb2", 101 0x18c, BIT(0), 0); 102 static SUNXI_CCU_GATE(r_apb2_i2c_clk, "r-apb2-i2c", "r-apb2", 103 0x19c, BIT(0), 0); 104 static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1", 105 0x1cc, BIT(0), 0); 106 static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1", 107 0x1cc, BIT(0), 0); 108 109 /* Information of IR(RX) mod clock is gathered from BSP source code */ 110 static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" }; 111 static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir", 112 r_mod0_default_parents, 0x1c0, 113 0, 5, /* M */ 114 8, 2, /* P */ 115 24, 1, /* mux */ 116 BIT(31), /* gate */ 117 0); 118 119 /* 120 * BSP didn't use the 1-wire function at all now, and the information about 121 * this mod clock is guessed from the IR mod clock above. The existence of 122 * this mod clock is proven by BSP clock header, and the dividers are verified 123 * by contents in the 1-wire related chapter of the User Manual. 124 */ 125 126 static SUNXI_CCU_MP_WITH_MUX_GATE(w1_clk, "w1", 127 r_mod0_default_parents, 0x1e0, 128 0, 5, /* M */ 129 8, 2, /* P */ 130 24, 1, /* mux */ 131 BIT(31), /* gate */ 132 0); 133 134 static struct ccu_common *sun50i_h6_r_ccu_clks[] = { 135 &ar100_clk.common, 136 &r_apb1_clk.common, 137 &r_apb2_clk.common, 138 &r_apb1_timer_clk.common, 139 &r_apb1_twd_clk.common, 140 &r_apb1_pwm_clk.common, 141 &r_apb2_uart_clk.common, 142 &r_apb2_i2c_clk.common, 143 &r_apb1_ir_clk.common, 144 &r_apb1_w1_clk.common, 145 &ir_clk.common, 146 &w1_clk.common, 147 }; 148 149 static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = { 150 .hws = { 151 [CLK_AR100] = &ar100_clk.common.hw, 152 [CLK_R_AHB] = &r_ahb_clk.hw, 153 [CLK_R_APB1] = &r_apb1_clk.common.hw, 154 [CLK_R_APB2] = &r_apb2_clk.common.hw, 155 [CLK_R_APB1_TIMER] = &r_apb1_timer_clk.common.hw, 156 [CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw, 157 [CLK_R_APB1_PWM] = &r_apb1_pwm_clk.common.hw, 158 [CLK_R_APB2_UART] = &r_apb2_uart_clk.common.hw, 159 [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw, 160 [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw, 161 [CLK_R_APB1_W1] = &r_apb1_w1_clk.common.hw, 162 [CLK_IR] = &ir_clk.common.hw, 163 [CLK_W1] = &w1_clk.common.hw, 164 }, 165 .num = CLK_NUMBER, 166 }; 167 168 static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = { 169 [RST_R_APB1_TIMER] = { 0x11c, BIT(16) }, 170 [RST_R_APB1_TWD] = { 0x12c, BIT(16) }, 171 [RST_R_APB1_PWM] = { 0x13c, BIT(16) }, 172 [RST_R_APB2_UART] = { 0x18c, BIT(16) }, 173 [RST_R_APB2_I2C] = { 0x19c, BIT(16) }, 174 [RST_R_APB1_IR] = { 0x1cc, BIT(16) }, 175 [RST_R_APB1_W1] = { 0x1ec, BIT(16) }, 176 }; 177 178 static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = { 179 .ccu_clks = sun50i_h6_r_ccu_clks, 180 .num_ccu_clks = ARRAY_SIZE(sun50i_h6_r_ccu_clks), 181 182 .hw_clks = &sun50i_h6_r_hw_clks, 183 184 .resets = sun50i_h6_r_ccu_resets, 185 .num_resets = ARRAY_SIZE(sun50i_h6_r_ccu_resets), 186 }; 187 188 static void __init sunxi_r_ccu_init(struct device_node *node, 189 const struct sunxi_ccu_desc *desc) 190 { 191 void __iomem *reg; 192 193 reg = of_io_request_and_map(node, 0, of_node_full_name(node)); 194 if (IS_ERR(reg)) { 195 pr_err("%pOF: Could not map the clock registers\n", node); 196 return; 197 } 198 199 sunxi_ccu_probe(node, reg, desc); 200 } 201 202 static void __init sun50i_h6_r_ccu_setup(struct device_node *node) 203 { 204 sunxi_r_ccu_init(node, &sun50i_h6_r_ccu_desc); 205 } 206 CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu", 207 sun50i_h6_r_ccu_setup); 208