1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2020 SiFive, Inc. 4 * Copyright (C) 2020 Zong Li 5 */ 6 7 #include <linux/clkdev.h> 8 #include <linux/delay.h> 9 #include <linux/io.h> 10 #include <linux/of_device.h> 11 #include "sifive-prci.h" 12 #include "fu540-prci.h" 13 #include "fu740-prci.h" 14 15 /* 16 * Private functions 17 */ 18 19 /** 20 * __prci_readl() - read from a PRCI register 21 * @pd: PRCI context 22 * @offs: register offset to read from (in bytes, from PRCI base address) 23 * 24 * Read the register located at offset @offs from the base virtual 25 * address of the PRCI register target described by @pd, and return 26 * the value to the caller. 27 * 28 * Context: Any context. 29 * 30 * Return: the contents of the register described by @pd and @offs. 31 */ 32 static u32 __prci_readl(struct __prci_data *pd, u32 offs) 33 { 34 return readl_relaxed(pd->va + offs); 35 } 36 37 static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd) 38 { 39 writel_relaxed(v, pd->va + offs); 40 } 41 42 /* WRPLL-related private functions */ 43 44 /** 45 * __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters 46 * @c: ptr to a struct wrpll_cfg record to write config into 47 * @r: value read from the PRCI PLL configuration register 48 * 49 * Given a value @r read from an FU740 PRCI PLL configuration register, 50 * split it into fields and populate it into the WRPLL configuration record 51 * pointed to by @c. 52 * 53 * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros 54 * have the same register layout. 55 * 56 * Context: Any context. 57 */ 58 static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r) 59 { 60 u32 v; 61 62 v = r & PRCI_COREPLLCFG0_DIVR_MASK; 63 v >>= PRCI_COREPLLCFG0_DIVR_SHIFT; 64 c->divr = v; 65 66 v = r & PRCI_COREPLLCFG0_DIVF_MASK; 67 v >>= PRCI_COREPLLCFG0_DIVF_SHIFT; 68 c->divf = v; 69 70 v = r & PRCI_COREPLLCFG0_DIVQ_MASK; 71 v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT; 72 c->divq = v; 73 74 v = r & PRCI_COREPLLCFG0_RANGE_MASK; 75 v >>= PRCI_COREPLLCFG0_RANGE_SHIFT; 76 c->range = v; 77 78 c->flags &= 79 (WRPLL_FLAGS_INT_FEEDBACK_MASK | WRPLL_FLAGS_EXT_FEEDBACK_MASK); 80 81 /* external feedback mode not supported */ 82 c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK; 83 } 84 85 /** 86 * __prci_wrpll_pack() - pack PLL configuration parameters into a register value 87 * @c: pointer to a struct wrpll_cfg record containing the PLL's cfg 88 * 89 * Using a set of WRPLL configuration values pointed to by @c, 90 * assemble a PRCI PLL configuration register value, and return it to 91 * the caller. 92 * 93 * Context: Any context. Caller must ensure that the contents of the 94 * record pointed to by @c do not change during the execution 95 * of this function. 96 * 97 * Returns: a value suitable for writing into a PRCI PLL configuration 98 * register 99 */ 100 static u32 __prci_wrpll_pack(const struct wrpll_cfg *c) 101 { 102 u32 r = 0; 103 104 r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT; 105 r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT; 106 r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT; 107 r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT; 108 109 /* external feedback mode not supported */ 110 r |= PRCI_COREPLLCFG0_FSE_MASK; 111 112 return r; 113 } 114 115 /** 116 * __prci_wrpll_read_cfg0() - read the WRPLL configuration from the PRCI 117 * @pd: PRCI context 118 * @pwd: PRCI WRPLL metadata 119 * 120 * Read the current configuration of the PLL identified by @pwd from 121 * the PRCI identified by @pd, and store it into the local configuration 122 * cache in @pwd. 123 * 124 * Context: Any context. Caller must prevent the records pointed to by 125 * @pd and @pwd from changing during execution. 126 */ 127 static void __prci_wrpll_read_cfg0(struct __prci_data *pd, 128 struct __prci_wrpll_data *pwd) 129 { 130 __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs)); 131 } 132 133 /** 134 * __prci_wrpll_write_cfg0() - write WRPLL configuration into the PRCI 135 * @pd: PRCI context 136 * @pwd: PRCI WRPLL metadata 137 * @c: WRPLL configuration record to write 138 * 139 * Write the WRPLL configuration described by @c into the WRPLL 140 * configuration register identified by @pwd in the PRCI instance 141 * described by @c. Make a cached copy of the WRPLL's current 142 * configuration so it can be used by other code. 143 * 144 * Context: Any context. Caller must prevent the records pointed to by 145 * @pd and @pwd from changing during execution. 146 */ 147 static void __prci_wrpll_write_cfg0(struct __prci_data *pd, 148 struct __prci_wrpll_data *pwd, 149 struct wrpll_cfg *c) 150 { 151 __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd); 152 153 memcpy(&pwd->c, c, sizeof(*c)); 154 } 155 156 /** 157 * __prci_wrpll_write_cfg1() - write Clock enable/disable configuration 158 * into the PRCI 159 * @pd: PRCI context 160 * @pwd: PRCI WRPLL metadata 161 * @enable: Clock enable or disable value 162 */ 163 static void __prci_wrpll_write_cfg1(struct __prci_data *pd, 164 struct __prci_wrpll_data *pwd, 165 u32 enable) 166 { 167 __prci_writel(enable, pwd->cfg1_offs, pd); 168 } 169 170 /* 171 * Linux clock framework integration 172 * 173 * See the Linux clock framework documentation for more information on 174 * these functions. 175 */ 176 177 unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw, 178 unsigned long parent_rate) 179 { 180 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 181 struct __prci_wrpll_data *pwd = pc->pwd; 182 183 return wrpll_calc_output_rate(&pwd->c, parent_rate); 184 } 185 186 long sifive_prci_wrpll_round_rate(struct clk_hw *hw, 187 unsigned long rate, 188 unsigned long *parent_rate) 189 { 190 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 191 struct __prci_wrpll_data *pwd = pc->pwd; 192 struct wrpll_cfg c; 193 194 memcpy(&c, &pwd->c, sizeof(c)); 195 196 wrpll_configure_for_rate(&c, rate, *parent_rate); 197 198 return wrpll_calc_output_rate(&c, *parent_rate); 199 } 200 201 int sifive_prci_wrpll_set_rate(struct clk_hw *hw, 202 unsigned long rate, unsigned long parent_rate) 203 { 204 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 205 struct __prci_wrpll_data *pwd = pc->pwd; 206 struct __prci_data *pd = pc->pd; 207 int r; 208 209 r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate); 210 if (r) 211 return r; 212 213 if (pwd->enable_bypass) 214 pwd->enable_bypass(pd); 215 216 __prci_wrpll_write_cfg0(pd, pwd, &pwd->c); 217 218 udelay(wrpll_calc_max_lock_us(&pwd->c)); 219 220 return 0; 221 } 222 223 int sifive_clk_is_enabled(struct clk_hw *hw) 224 { 225 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 226 struct __prci_wrpll_data *pwd = pc->pwd; 227 struct __prci_data *pd = pc->pd; 228 u32 r; 229 230 r = __prci_readl(pd, pwd->cfg1_offs); 231 232 if (r & PRCI_COREPLLCFG1_CKE_MASK) 233 return 1; 234 else 235 return 0; 236 } 237 238 int sifive_prci_clock_enable(struct clk_hw *hw) 239 { 240 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 241 struct __prci_wrpll_data *pwd = pc->pwd; 242 struct __prci_data *pd = pc->pd; 243 244 if (sifive_clk_is_enabled(hw)) 245 return 0; 246 247 __prci_wrpll_write_cfg1(pd, pwd, PRCI_COREPLLCFG1_CKE_MASK); 248 249 if (pwd->disable_bypass) 250 pwd->disable_bypass(pd); 251 252 return 0; 253 } 254 255 void sifive_prci_clock_disable(struct clk_hw *hw) 256 { 257 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 258 struct __prci_wrpll_data *pwd = pc->pwd; 259 struct __prci_data *pd = pc->pd; 260 u32 r; 261 262 if (pwd->enable_bypass) 263 pwd->enable_bypass(pd); 264 265 r = __prci_readl(pd, pwd->cfg1_offs); 266 r &= ~PRCI_COREPLLCFG1_CKE_MASK; 267 268 __prci_wrpll_write_cfg1(pd, pwd, r); 269 } 270 271 /* TLCLKSEL clock integration */ 272 273 unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw, 274 unsigned long parent_rate) 275 { 276 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 277 struct __prci_data *pd = pc->pd; 278 u32 v; 279 u8 div; 280 281 v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET); 282 v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK; 283 div = v ? 1 : 2; 284 285 return div_u64(parent_rate, div); 286 } 287 288 /* HFPCLK clock integration */ 289 290 unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw, 291 unsigned long parent_rate) 292 { 293 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 294 struct __prci_data *pd = pc->pd; 295 u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET); 296 297 return div_u64(parent_rate, div + 2); 298 } 299 300 /* 301 * Core clock mux control 302 */ 303 304 /** 305 * sifive_prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK 306 * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg 307 * 308 * Switch the CORECLK mux to the HFCLK input source; return once complete. 309 * 310 * Context: Any context. Caller must prevent concurrent changes to the 311 * PRCI_CORECLKSEL_OFFSET register. 312 */ 313 void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd) 314 { 315 u32 r; 316 317 r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); 318 r |= PRCI_CORECLKSEL_CORECLKSEL_MASK; 319 __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); 320 321 r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ 322 } 323 324 /** 325 * sifive_prci_coreclksel_use_corepll() - switch the CORECLK mux to output 326 * COREPLL 327 * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg 328 * 329 * Switch the CORECLK mux to the COREPLL output clock; return once complete. 330 * 331 * Context: Any context. Caller must prevent concurrent changes to the 332 * PRCI_CORECLKSEL_OFFSET register. 333 */ 334 void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd) 335 { 336 u32 r; 337 338 r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); 339 r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK; 340 __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); 341 342 r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ 343 } 344 345 /** 346 * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux to output 347 * FINAL_COREPLL 348 * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg 349 * 350 * Switch the CORECLK mux to the final COREPLL output clock; return once 351 * complete. 352 * 353 * Context: Any context. Caller must prevent concurrent changes to the 354 * PRCI_CORECLKSEL_OFFSET register. 355 */ 356 void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd) 357 { 358 u32 r; 359 360 r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); 361 r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK; 362 __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); 363 364 r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ 365 } 366 367 /** 368 * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to 369 * output DVFS_COREPLL 370 * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg 371 * 372 * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once complete. 373 * 374 * Context: Any context. Caller must prevent concurrent changes to the 375 * PRCI_COREPLLSEL_OFFSET register. 376 */ 377 void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd) 378 { 379 u32 r; 380 381 r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); 382 r |= PRCI_COREPLLSEL_COREPLLSEL_MASK; 383 __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd); 384 385 r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */ 386 } 387 388 /** 389 * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to 390 * output COREPLL 391 * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg 392 * 393 * Switch the COREPLL mux to the COREPLL output clock; return once complete. 394 * 395 * Context: Any context. Caller must prevent concurrent changes to the 396 * PRCI_COREPLLSEL_OFFSET register. 397 */ 398 void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd) 399 { 400 u32 r; 401 402 r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); 403 r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK; 404 __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd); 405 406 r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */ 407 } 408 409 /** 410 * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to 411 * output HFCLK 412 * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg 413 * 414 * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete. 415 * 416 * Context: Any context. Caller must prevent concurrent changes to the 417 * PRCI_HFPCLKPLLSEL_OFFSET register. 418 */ 419 void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd) 420 { 421 u32 r; 422 423 r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); 424 r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK; 425 __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd); 426 427 r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */ 428 } 429 430 /** 431 * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux to 432 * output HFPCLKPLL 433 * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg 434 * 435 * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once complete. 436 * 437 * Context: Any context. Caller must prevent concurrent changes to the 438 * PRCI_HFPCLKPLLSEL_OFFSET register. 439 */ 440 void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd) 441 { 442 u32 r; 443 444 r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); 445 r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK; 446 __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd); 447 448 r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */ 449 } 450 451 /* PCIE AUX clock APIs for enable, disable. */ 452 int sifive_prci_pcie_aux_clock_is_enabled(struct clk_hw *hw) 453 { 454 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 455 struct __prci_data *pd = pc->pd; 456 u32 r; 457 458 r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET); 459 460 if (r & PRCI_PCIE_AUX_EN_MASK) 461 return 1; 462 else 463 return 0; 464 } 465 466 int sifive_prci_pcie_aux_clock_enable(struct clk_hw *hw) 467 { 468 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 469 struct __prci_data *pd = pc->pd; 470 u32 r __maybe_unused; 471 472 if (sifive_prci_pcie_aux_clock_is_enabled(hw)) 473 return 0; 474 475 __prci_writel(1, PRCI_PCIE_AUX_OFFSET, pd); 476 r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET); /* barrier */ 477 478 return 0; 479 } 480 481 void sifive_prci_pcie_aux_clock_disable(struct clk_hw *hw) 482 { 483 struct __prci_clock *pc = clk_hw_to_prci_clock(hw); 484 struct __prci_data *pd = pc->pd; 485 u32 r __maybe_unused; 486 487 __prci_writel(0, PRCI_PCIE_AUX_OFFSET, pd); 488 r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET); /* barrier */ 489 490 } 491 492 /** 493 * __prci_register_clocks() - register clock controls in the PRCI 494 * @dev: Linux struct device 495 * @pd: The pointer for PRCI per-device instance data 496 * @desc: The pointer for the information of clocks of each SoCs 497 * 498 * Register the list of clock controls described in __prci_init_clocks[] with 499 * the Linux clock framework. 500 * 501 * Return: 0 upon success or a negative error code upon failure. 502 */ 503 static int __prci_register_clocks(struct device *dev, struct __prci_data *pd, 504 const struct prci_clk_desc *desc) 505 { 506 struct clk_init_data init = { }; 507 struct __prci_clock *pic; 508 int parent_count, i, r; 509 510 parent_count = of_clk_get_parent_count(dev->of_node); 511 if (parent_count != EXPECTED_CLK_PARENT_COUNT) { 512 dev_err(dev, "expected only two parent clocks, found %d\n", 513 parent_count); 514 return -EINVAL; 515 } 516 517 /* Register PLLs */ 518 for (i = 0; i < desc->num_clks; ++i) { 519 pic = &(desc->clks[i]); 520 521 init.name = pic->name; 522 init.parent_names = &pic->parent_name; 523 init.num_parents = 1; 524 init.ops = pic->ops; 525 pic->hw.init = &init; 526 527 pic->pd = pd; 528 529 if (pic->pwd) 530 __prci_wrpll_read_cfg0(pd, pic->pwd); 531 532 r = devm_clk_hw_register(dev, &pic->hw); 533 if (r) { 534 dev_warn(dev, "Failed to register clock %s: %d\n", 535 init.name, r); 536 return r; 537 } 538 539 r = clk_hw_register_clkdev(&pic->hw, pic->name, dev_name(dev)); 540 if (r) { 541 dev_warn(dev, "Failed to register clkdev for %s: %d\n", 542 init.name, r); 543 return r; 544 } 545 546 pd->hw_clks.hws[i] = &pic->hw; 547 } 548 549 pd->hw_clks.num = i; 550 551 r = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, 552 &pd->hw_clks); 553 if (r) { 554 dev_err(dev, "could not add hw_provider: %d\n", r); 555 return r; 556 } 557 558 return 0; 559 } 560 561 /** 562 * sifive_prci_probe() - initialize prci data and check parent count 563 * @pdev: platform device pointer for the prci 564 * 565 * Return: 0 upon success or a negative error code upon failure. 566 */ 567 static int sifive_prci_probe(struct platform_device *pdev) 568 { 569 struct device *dev = &pdev->dev; 570 struct __prci_data *pd; 571 const struct prci_clk_desc *desc; 572 int r; 573 574 desc = of_device_get_match_data(&pdev->dev); 575 576 pd = devm_kzalloc(dev, struct_size(pd, hw_clks.hws, desc->num_clks), GFP_KERNEL); 577 if (!pd) 578 return -ENOMEM; 579 580 pd->va = devm_platform_ioremap_resource(pdev, 0); 581 if (IS_ERR(pd->va)) 582 return PTR_ERR(pd->va); 583 584 pd->reset.rcdev.owner = THIS_MODULE; 585 pd->reset.rcdev.nr_resets = PRCI_RST_NR; 586 pd->reset.rcdev.ops = &reset_simple_ops; 587 pd->reset.rcdev.of_node = pdev->dev.of_node; 588 pd->reset.active_low = true; 589 pd->reset.membase = pd->va + PRCI_DEVICESRESETREG_OFFSET; 590 spin_lock_init(&pd->reset.lock); 591 592 r = devm_reset_controller_register(&pdev->dev, &pd->reset.rcdev); 593 if (r) { 594 dev_err(dev, "could not register reset controller: %d\n", r); 595 return r; 596 } 597 r = __prci_register_clocks(dev, pd, desc); 598 if (r) { 599 dev_err(dev, "could not register clocks: %d\n", r); 600 return r; 601 } 602 603 dev_dbg(dev, "SiFive PRCI probed\n"); 604 605 return 0; 606 } 607 608 static const struct of_device_id sifive_prci_of_match[] = { 609 {.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540}, 610 {.compatible = "sifive,fu740-c000-prci", .data = &prci_clk_fu740}, 611 {} 612 }; 613 614 static struct platform_driver sifive_prci_driver = { 615 .driver = { 616 .name = "sifive-clk-prci", 617 .of_match_table = sifive_prci_of_match, 618 }, 619 .probe = sifive_prci_probe, 620 }; 621 622 static int __init sifive_prci_init(void) 623 { 624 return platform_driver_register(&sifive_prci_driver); 625 } 626 core_initcall(sifive_prci_init); 627