xref: /openbmc/linux/drivers/clk/samsung/clk-pll.h (revision b830f94f)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
4  * Copyright (c) 2013 Linaro Ltd.
5  *
6  * Common Clock Framework support for all PLL's in Samsung platforms
7 */
8 
9 #ifndef __SAMSUNG_CLK_PLL_H
10 #define __SAMSUNG_CLK_PLL_H
11 
12 enum samsung_pll_type {
13 	pll_2126,
14 	pll_3000,
15 	pll_35xx,
16 	pll_36xx,
17 	pll_2550,
18 	pll_2650,
19 	pll_4500,
20 	pll_4502,
21 	pll_4508,
22 	pll_4600,
23 	pll_4650,
24 	pll_4650c,
25 	pll_6552,
26 	pll_6552_s3c2416,
27 	pll_6553,
28 	pll_s3c2410_mpll,
29 	pll_s3c2410_upll,
30 	pll_s3c2440_mpll,
31 	pll_2550x,
32 	pll_2550xx,
33 	pll_2650x,
34 	pll_2650xx,
35 	pll_1450x,
36 	pll_1451x,
37 	pll_1452x,
38 	pll_1460x,
39 };
40 
41 #define PLL_RATE(_fin, _m, _p, _s, _k, _ks) \
42 	((u64)(_fin) * (BIT(_ks) * (_m) + (_k)) / BIT(_ks) / ((_p) << (_s)))
43 #define PLL_VALID_RATE(_fin, _fout, _m, _p, _s, _k, _ks) ((_fout) + \
44 	BUILD_BUG_ON_ZERO(PLL_RATE(_fin, _m, _p, _s, _k, _ks) != (_fout)))
45 
46 #define PLL_35XX_RATE(_fin, _rate, _m, _p, _s)			\
47 	{							\
48 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
49 				_m, _p, _s, 0, 16),		\
50 		.mdiv	=	(_m),				\
51 		.pdiv	=	(_p),				\
52 		.sdiv	=	(_s),				\
53 	}
54 
55 #define PLL_S3C2410_MPLL_RATE(_fin, _rate, _m, _p, _s)		\
56 	{							\
57 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
58 				_m + 8, _p + 2, _s, 0, 16),	\
59 		.mdiv	=	(_m),				\
60 		.pdiv	=	(_p),				\
61 		.sdiv	=	(_s),				\
62 	}
63 
64 #define PLL_S3C2440_MPLL_RATE(_fin, _rate, _m, _p, _s)		\
65 	{							\
66 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
67 				2 * (_m + 8), _p + 2, _s, 0, 16), \
68 		.mdiv	=	(_m),				\
69 		.pdiv	=	(_p),				\
70 		.sdiv	=	(_s),				\
71 	}
72 
73 #define PLL_36XX_RATE(_fin, _rate, _m, _p, _s, _k)		\
74 	{							\
75 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
76 				_m, _p, _s, _k, 16),		\
77 		.mdiv	=	(_m),				\
78 		.pdiv	=	(_p),				\
79 		.sdiv	=	(_s),				\
80 		.kdiv	=	(_k),				\
81 	}
82 
83 #define PLL_4508_RATE(_fin, _rate, _m, _p, _s, _afc)		\
84 	{							\
85 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
86 				_m, _p, _s - 1, 0, 16),		\
87 		.mdiv	=	(_m),				\
88 		.pdiv	=	(_p),				\
89 		.sdiv	=	(_s),				\
90 		.afc	=	(_afc),				\
91 	}
92 
93 #define PLL_4600_RATE(_fin, _rate, _m, _p, _s, _k, _vsel)	\
94 	{							\
95 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
96 				_m, _p, _s, _k, 16),		\
97 		.mdiv	=	(_m),				\
98 		.pdiv	=	(_p),				\
99 		.sdiv	=	(_s),				\
100 		.kdiv	=	(_k),				\
101 		.vsel	=	(_vsel),			\
102 	}
103 
104 #define PLL_4650_RATE(_fin, _rate, _m, _p, _s, _k, _mfr, _mrr, _vsel) \
105 	{							\
106 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
107 				_m, _p, _s, _k, 10),		\
108 		.mdiv	=	(_m),				\
109 		.pdiv	=	(_p),				\
110 		.sdiv	=	(_s),				\
111 		.kdiv	=	(_k),				\
112 		.mfr	=	(_mfr),				\
113 		.mrr	=	(_mrr),				\
114 		.vsel	=	(_vsel),			\
115 	}
116 
117 /* NOTE: Rate table should be kept sorted in descending order. */
118 
119 struct samsung_pll_rate_table {
120 	unsigned int rate;
121 	unsigned int pdiv;
122 	unsigned int mdiv;
123 	unsigned int sdiv;
124 	unsigned int kdiv;
125 	unsigned int afc;
126 	unsigned int mfr;
127 	unsigned int mrr;
128 	unsigned int vsel;
129 };
130 
131 #endif /* __SAMSUNG_CLK_PLL_H */
132