1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * R9A06G032 clock driver
4  *
5  * Copyright (C) 2018 Renesas Electronics Europe Limited
6  *
7  * Michel Pollet <michel.pollet@bp.renesas.com>, <buserror@gmail.com>
8  */
9 
10 #include <linux/clk.h>
11 #include <linux/clk-provider.h>
12 #include <linux/delay.h>
13 #include <linux/init.h>
14 #include <linux/io.h>
15 #include <linux/kernel.h>
16 #include <linux/math64.h>
17 #include <linux/of.h>
18 #include <linux/of_address.h>
19 #include <linux/platform_device.h>
20 #include <linux/pm_clock.h>
21 #include <linux/pm_domain.h>
22 #include <linux/slab.h>
23 #include <linux/spinlock.h>
24 #include <dt-bindings/clock/r9a06g032-sysctrl.h>
25 
26 struct r9a06g032_gate {
27 	u16 gate, reset, ready, midle,
28 		scon, mirack, mistat;
29 };
30 
31 /* This is used to describe a clock for instantiation */
32 struct r9a06g032_clkdesc {
33 	const char *name;
34 	uint32_t managed: 1;
35 	uint32_t type: 3;
36 	uint32_t index: 8;
37 	uint32_t source : 8; /* source index + 1 (0 == none) */
38 	/* these are used to populate the bitsel struct */
39 	union {
40 		struct r9a06g032_gate gate;
41 		/* for dividers */
42 		struct {
43 			unsigned int div_min : 10, div_max : 10, reg: 10;
44 			u16 div_table[4];
45 		};
46 		/* For fixed-factor ones */
47 		struct {
48 			u16 div, mul;
49 		};
50 		unsigned int factor;
51 		unsigned int frequency;
52 		/* for dual gate */
53 		struct {
54 			uint16_t group : 1, index: 3;
55 			u16 sel, g1, r1, g2, r2;
56 		} dual;
57 	};
58 } __packed;
59 
60 #define I_GATE(_clk, _rst, _rdy, _midle, _scon, _mirack, _mistat) \
61 	{ .gate = _clk, .reset = _rst, \
62 		.ready = _rdy, .midle = _midle, \
63 		.scon = _scon, .mirack = _mirack, .mistat = _mistat }
64 #define D_GATE(_idx, _n, _src, ...) \
65 	{ .type = K_GATE, .index = R9A06G032_##_idx, \
66 		.source = 1 + R9A06G032_##_src, .name = _n, \
67 		.gate = I_GATE(__VA_ARGS__) }
68 #define D_MODULE(_idx, _n, _src, ...) \
69 	{ .type = K_GATE, .index = R9A06G032_##_idx, \
70 		.source = 1 + R9A06G032_##_src, .name = _n, \
71 		.managed = 1, .gate = I_GATE(__VA_ARGS__) }
72 #define D_ROOT(_idx, _n, _mul, _div) \
73 	{ .type = K_FFC, .index = R9A06G032_##_idx, .name = _n, \
74 		.div = _div, .mul = _mul }
75 #define D_FFC(_idx, _n, _src, _div) \
76 	{ .type = K_FFC, .index = R9A06G032_##_idx, \
77 		.source = 1 + R9A06G032_##_src, .name = _n, \
78 		.div = _div, .mul = 1}
79 #define D_DIV(_idx, _n, _src, _reg, _min, _max, ...) \
80 	{ .type = K_DIV, .index = R9A06G032_##_idx, \
81 		.source = 1 + R9A06G032_##_src, .name = _n, \
82 		.reg = _reg, .div_min = _min, .div_max = _max, \
83 		.div_table = { __VA_ARGS__ } }
84 #define D_UGATE(_idx, _n, _src, _g, _gi, _g1, _r1, _g2, _r2) \
85 	{ .type = K_DUALGATE, .index = R9A06G032_##_idx, \
86 		.source = 1 + R9A06G032_##_src, .name = _n, \
87 		.dual = { .group = _g, .index = _gi, \
88 			.g1 = _g1, .r1 = _r1, .g2 = _g2, .r2 = _r2 }, }
89 
90 enum { K_GATE = 0, K_FFC, K_DIV, K_BITSEL, K_DUALGATE };
91 
92 /* Internal clock IDs */
93 #define R9A06G032_CLKOUT		0
94 #define R9A06G032_CLKOUT_D10		2
95 #define R9A06G032_CLKOUT_D16		3
96 #define R9A06G032_CLKOUT_D160		4
97 #define R9A06G032_CLKOUT_D1OR2		5
98 #define R9A06G032_CLKOUT_D20		6
99 #define R9A06G032_CLKOUT_D40		7
100 #define R9A06G032_CLKOUT_D5		8
101 #define R9A06G032_CLKOUT_D8		9
102 #define R9A06G032_DIV_ADC		10
103 #define R9A06G032_DIV_I2C		11
104 #define R9A06G032_DIV_NAND		12
105 #define R9A06G032_DIV_P1_PG		13
106 #define R9A06G032_DIV_P2_PG		14
107 #define R9A06G032_DIV_P3_PG		15
108 #define R9A06G032_DIV_P4_PG		16
109 #define R9A06G032_DIV_P5_PG		17
110 #define R9A06G032_DIV_P6_PG		18
111 #define R9A06G032_DIV_QSPI0		19
112 #define R9A06G032_DIV_QSPI1		20
113 #define R9A06G032_DIV_REF_SYNC		21
114 #define R9A06G032_DIV_SDIO0		22
115 #define R9A06G032_DIV_SDIO1		23
116 #define R9A06G032_DIV_SWITCH		24
117 #define R9A06G032_DIV_UART		25
118 #define R9A06G032_DIV_MOTOR		64
119 #define R9A06G032_CLK_DDRPHY_PLLCLK_D4	78
120 #define R9A06G032_CLK_ECAT100_D4	79
121 #define R9A06G032_CLK_HSR100_D2		80
122 #define R9A06G032_CLK_REF_SYNC_D4	81
123 #define R9A06G032_CLK_REF_SYNC_D8	82
124 #define R9A06G032_CLK_SERCOS100_D2	83
125 #define R9A06G032_DIV_CA7		84
126 
127 #define R9A06G032_UART_GROUP_012	154
128 #define R9A06G032_UART_GROUP_34567	155
129 
130 #define R9A06G032_CLOCK_COUNT		(R9A06G032_UART_GROUP_34567 + 1)
131 
132 static const struct r9a06g032_clkdesc r9a06g032_clocks[] = {
133 	D_ROOT(CLKOUT, "clkout", 25, 1),
134 	D_ROOT(CLK_PLL_USB, "clk_pll_usb", 12, 10),
135 	D_FFC(CLKOUT_D10, "clkout_d10", CLKOUT, 10),
136 	D_FFC(CLKOUT_D16, "clkout_d16", CLKOUT, 16),
137 	D_FFC(CLKOUT_D160, "clkout_d160", CLKOUT, 160),
138 	D_DIV(CLKOUT_D1OR2, "clkout_d1or2", CLKOUT, 0, 1, 2),
139 	D_FFC(CLKOUT_D20, "clkout_d20", CLKOUT, 20),
140 	D_FFC(CLKOUT_D40, "clkout_d40", CLKOUT, 40),
141 	D_FFC(CLKOUT_D5, "clkout_d5", CLKOUT, 5),
142 	D_FFC(CLKOUT_D8, "clkout_d8", CLKOUT, 8),
143 	D_DIV(DIV_ADC, "div_adc", CLKOUT, 77, 50, 250),
144 	D_DIV(DIV_I2C, "div_i2c", CLKOUT, 78, 12, 16),
145 	D_DIV(DIV_NAND, "div_nand", CLKOUT, 82, 12, 32),
146 	D_DIV(DIV_P1_PG, "div_p1_pg", CLKOUT, 68, 12, 200),
147 	D_DIV(DIV_P2_PG, "div_p2_pg", CLKOUT, 62, 12, 128),
148 	D_DIV(DIV_P3_PG, "div_p3_pg", CLKOUT, 64, 8, 128),
149 	D_DIV(DIV_P4_PG, "div_p4_pg", CLKOUT, 66, 8, 128),
150 	D_DIV(DIV_P5_PG, "div_p5_pg", CLKOUT, 71, 10, 40),
151 	D_DIV(DIV_P6_PG, "div_p6_pg", CLKOUT, 18, 12, 64),
152 	D_DIV(DIV_QSPI0, "div_qspi0", CLKOUT, 73, 3, 7),
153 	D_DIV(DIV_QSPI1, "div_qspi1", CLKOUT, 25, 3, 7),
154 	D_DIV(DIV_REF_SYNC, "div_ref_sync", CLKOUT, 56, 2, 16, 2, 4, 8, 16),
155 	D_DIV(DIV_SDIO0, "div_sdio0", CLKOUT, 74, 20, 128),
156 	D_DIV(DIV_SDIO1, "div_sdio1", CLKOUT, 75, 20, 128),
157 	D_DIV(DIV_SWITCH, "div_switch", CLKOUT, 37, 5, 40),
158 	D_DIV(DIV_UART, "div_uart", CLKOUT, 79, 12, 128),
159 	D_GATE(CLK_25_PG4, "clk_25_pg4", CLKOUT_D40, 0x749, 0x74a, 0x74b, 0, 0xae3, 0, 0),
160 	D_GATE(CLK_25_PG5, "clk_25_pg5", CLKOUT_D40, 0x74c, 0x74d, 0x74e, 0, 0xae4, 0, 0),
161 	D_GATE(CLK_25_PG6, "clk_25_pg6", CLKOUT_D40, 0x74f, 0x750, 0x751, 0, 0xae5, 0, 0),
162 	D_GATE(CLK_25_PG7, "clk_25_pg7", CLKOUT_D40, 0x752, 0x753, 0x754, 0, 0xae6, 0, 0),
163 	D_GATE(CLK_25_PG8, "clk_25_pg8", CLKOUT_D40, 0x755, 0x756, 0x757, 0, 0xae7, 0, 0),
164 	D_GATE(CLK_ADC, "clk_adc", DIV_ADC, 0x1ea, 0x1eb, 0, 0, 0, 0, 0),
165 	D_GATE(CLK_ECAT100, "clk_ecat100", CLKOUT_D10, 0x405, 0, 0, 0, 0, 0, 0),
166 	D_GATE(CLK_HSR100, "clk_hsr100", CLKOUT_D10, 0x483, 0, 0, 0, 0, 0, 0),
167 	D_GATE(CLK_I2C0, "clk_i2c0", DIV_I2C, 0x1e6, 0x1e7, 0, 0, 0, 0, 0),
168 	D_GATE(CLK_I2C1, "clk_i2c1", DIV_I2C, 0x1e8, 0x1e9, 0, 0, 0, 0, 0),
169 	D_GATE(CLK_MII_REF, "clk_mii_ref", CLKOUT_D40, 0x342, 0, 0, 0, 0, 0, 0),
170 	D_GATE(CLK_NAND, "clk_nand", DIV_NAND, 0x284, 0x285, 0, 0, 0, 0, 0),
171 	D_GATE(CLK_NOUSBP2_PG6, "clk_nousbp2_pg6", DIV_P2_PG, 0x774, 0x775, 0, 0, 0, 0, 0),
172 	D_GATE(CLK_P1_PG2, "clk_p1_pg2", DIV_P1_PG, 0x862, 0x863, 0, 0, 0, 0, 0),
173 	D_GATE(CLK_P1_PG3, "clk_p1_pg3", DIV_P1_PG, 0x864, 0x865, 0, 0, 0, 0, 0),
174 	D_GATE(CLK_P1_PG4, "clk_p1_pg4", DIV_P1_PG, 0x866, 0x867, 0, 0, 0, 0, 0),
175 	D_GATE(CLK_P4_PG3, "clk_p4_pg3", DIV_P4_PG, 0x824, 0x825, 0, 0, 0, 0, 0),
176 	D_GATE(CLK_P4_PG4, "clk_p4_pg4", DIV_P4_PG, 0x826, 0x827, 0, 0, 0, 0, 0),
177 	D_GATE(CLK_P6_PG1, "clk_p6_pg1", DIV_P6_PG, 0x8a0, 0x8a1, 0x8a2, 0, 0xb60, 0, 0),
178 	D_GATE(CLK_P6_PG2, "clk_p6_pg2", DIV_P6_PG, 0x8a3, 0x8a4, 0x8a5, 0, 0xb61, 0, 0),
179 	D_GATE(CLK_P6_PG3, "clk_p6_pg3", DIV_P6_PG, 0x8a6, 0x8a7, 0x8a8, 0, 0xb62, 0, 0),
180 	D_GATE(CLK_P6_PG4, "clk_p6_pg4", DIV_P6_PG, 0x8a9, 0x8aa, 0x8ab, 0, 0xb63, 0, 0),
181 	D_MODULE(CLK_PCI_USB, "clk_pci_usb", CLKOUT_D40, 0xe6, 0, 0, 0, 0, 0, 0),
182 	D_GATE(CLK_QSPI0, "clk_qspi0", DIV_QSPI0, 0x2a4, 0x2a5, 0, 0, 0, 0, 0),
183 	D_GATE(CLK_QSPI1, "clk_qspi1", DIV_QSPI1, 0x484, 0x485, 0, 0, 0, 0, 0),
184 	D_GATE(CLK_RGMII_REF, "clk_rgmii_ref", CLKOUT_D8, 0x340, 0, 0, 0, 0, 0, 0),
185 	D_GATE(CLK_RMII_REF, "clk_rmii_ref", CLKOUT_D20, 0x341, 0, 0, 0, 0, 0, 0),
186 	D_GATE(CLK_SDIO0, "clk_sdio0", DIV_SDIO0, 0x64, 0, 0, 0, 0, 0, 0),
187 	D_GATE(CLK_SDIO1, "clk_sdio1", DIV_SDIO1, 0x644, 0, 0, 0, 0, 0, 0),
188 	D_GATE(CLK_SERCOS100, "clk_sercos100", CLKOUT_D10, 0x425, 0, 0, 0, 0, 0, 0),
189 	D_GATE(CLK_SLCD, "clk_slcd", DIV_P1_PG, 0x860, 0x861, 0, 0, 0, 0, 0),
190 	D_GATE(CLK_SPI0, "clk_spi0", DIV_P3_PG, 0x7e0, 0x7e1, 0, 0, 0, 0, 0),
191 	D_GATE(CLK_SPI1, "clk_spi1", DIV_P3_PG, 0x7e2, 0x7e3, 0, 0, 0, 0, 0),
192 	D_GATE(CLK_SPI2, "clk_spi2", DIV_P3_PG, 0x7e4, 0x7e5, 0, 0, 0, 0, 0),
193 	D_GATE(CLK_SPI3, "clk_spi3", DIV_P3_PG, 0x7e6, 0x7e7, 0, 0, 0, 0, 0),
194 	D_GATE(CLK_SPI4, "clk_spi4", DIV_P4_PG, 0x820, 0x821, 0, 0, 0, 0, 0),
195 	D_GATE(CLK_SPI5, "clk_spi5", DIV_P4_PG, 0x822, 0x823, 0, 0, 0, 0, 0),
196 	D_GATE(CLK_SWITCH, "clk_switch", DIV_SWITCH, 0x982, 0x983, 0, 0, 0, 0, 0),
197 	D_DIV(DIV_MOTOR, "div_motor", CLKOUT_D5, 84, 2, 8),
198 	D_MODULE(HCLK_ECAT125, "hclk_ecat125", CLKOUT_D8, 0x400, 0x401, 0, 0x402, 0, 0x440, 0x441),
199 	D_MODULE(HCLK_PINCONFIG, "hclk_pinconfig", CLKOUT_D40, 0x740, 0x741, 0x742, 0, 0xae0, 0, 0),
200 	D_MODULE(HCLK_SERCOS, "hclk_sercos", CLKOUT_D10, 0x420, 0x422, 0, 0x421, 0, 0x460, 0x461),
201 	D_MODULE(HCLK_SGPIO2, "hclk_sgpio2", DIV_P5_PG, 0x8c3, 0x8c4, 0x8c5, 0, 0xb41, 0, 0),
202 	D_MODULE(HCLK_SGPIO3, "hclk_sgpio3", DIV_P5_PG, 0x8c6, 0x8c7, 0x8c8, 0, 0xb42, 0, 0),
203 	D_MODULE(HCLK_SGPIO4, "hclk_sgpio4", DIV_P5_PG, 0x8c9, 0x8ca, 0x8cb, 0, 0xb43, 0, 0),
204 	D_MODULE(HCLK_TIMER0, "hclk_timer0", CLKOUT_D40, 0x743, 0x744, 0x745, 0, 0xae1, 0, 0),
205 	D_MODULE(HCLK_TIMER1, "hclk_timer1", CLKOUT_D40, 0x746, 0x747, 0x748, 0, 0xae2, 0, 0),
206 	D_MODULE(HCLK_USBF, "hclk_usbf", CLKOUT_D8, 0xe3, 0, 0, 0xe4, 0, 0x102, 0x103),
207 	D_MODULE(HCLK_USBH, "hclk_usbh", CLKOUT_D8, 0xe0, 0xe1, 0, 0xe2, 0, 0x100, 0x101),
208 	D_MODULE(HCLK_USBPM, "hclk_usbpm", CLKOUT_D8, 0xe5, 0, 0, 0, 0, 0, 0),
209 	D_GATE(CLK_48_PG_F, "clk_48_pg_f", CLK_48, 0x78c, 0x78d, 0, 0x78e, 0, 0xb04, 0xb05),
210 	D_GATE(CLK_48_PG4, "clk_48_pg4", CLK_48, 0x789, 0x78a, 0x78b, 0, 0xb03, 0, 0),
211 	D_FFC(CLK_DDRPHY_PLLCLK_D4, "clk_ddrphy_pllclk_d4", CLK_DDRPHY_PLLCLK, 4),
212 	D_FFC(CLK_ECAT100_D4, "clk_ecat100_d4", CLK_ECAT100, 4),
213 	D_FFC(CLK_HSR100_D2, "clk_hsr100_d2", CLK_HSR100, 2),
214 	D_FFC(CLK_REF_SYNC_D4, "clk_ref_sync_d4", CLK_REF_SYNC, 4),
215 	D_FFC(CLK_REF_SYNC_D8, "clk_ref_sync_d8", CLK_REF_SYNC, 8),
216 	D_FFC(CLK_SERCOS100_D2, "clk_sercos100_d2", CLK_SERCOS100, 2),
217 	D_DIV(DIV_CA7, "div_ca7", CLK_REF_SYNC, 57, 1, 4, 1, 2, 4),
218 	D_MODULE(HCLK_CAN0, "hclk_can0", CLK_48, 0x783, 0x784, 0x785, 0, 0xb01, 0, 0),
219 	D_MODULE(HCLK_CAN1, "hclk_can1", CLK_48, 0x786, 0x787, 0x788, 0, 0xb02, 0, 0),
220 	D_MODULE(HCLK_DELTASIGMA, "hclk_deltasigma", DIV_MOTOR, 0x1ef, 0x1f0, 0x1f1, 0, 0, 0, 0),
221 	D_MODULE(HCLK_PWMPTO, "hclk_pwmpto", DIV_MOTOR, 0x1ec, 0x1ed, 0x1ee, 0, 0, 0, 0),
222 	D_MODULE(HCLK_RSV, "hclk_rsv", CLK_48, 0x780, 0x781, 0x782, 0, 0xb00, 0, 0),
223 	D_MODULE(HCLK_SGPIO0, "hclk_sgpio0", DIV_MOTOR, 0x1e0, 0x1e1, 0x1e2, 0, 0, 0, 0),
224 	D_MODULE(HCLK_SGPIO1, "hclk_sgpio1", DIV_MOTOR, 0x1e3, 0x1e4, 0x1e5, 0, 0, 0, 0),
225 	D_DIV(RTOS_MDC, "rtos_mdc", CLK_REF_SYNC, 100, 80, 640, 80, 160, 320, 640),
226 	D_GATE(CLK_CM3, "clk_cm3", CLK_REF_SYNC_D4, 0xba0, 0xba1, 0, 0xba2, 0, 0xbc0, 0xbc1),
227 	D_GATE(CLK_DDRC, "clk_ddrc", CLK_DDRPHY_PLLCLK_D4, 0x323, 0x324, 0, 0, 0, 0, 0),
228 	D_GATE(CLK_ECAT25, "clk_ecat25", CLK_ECAT100_D4, 0x403, 0x404, 0, 0, 0, 0, 0),
229 	D_GATE(CLK_HSR50, "clk_hsr50", CLK_HSR100_D2, 0x484, 0x485, 0, 0, 0, 0, 0),
230 	D_GATE(CLK_HW_RTOS, "clk_hw_rtos", CLK_REF_SYNC_D4, 0xc60, 0xc61, 0, 0, 0, 0, 0),
231 	D_GATE(CLK_SERCOS50, "clk_sercos50", CLK_SERCOS100_D2, 0x424, 0x423, 0, 0, 0, 0, 0),
232 	D_MODULE(HCLK_ADC, "hclk_adc", CLK_REF_SYNC_D8, 0x1af, 0x1b0, 0x1b1, 0, 0, 0, 0),
233 	D_MODULE(HCLK_CM3, "hclk_cm3", CLK_REF_SYNC_D4, 0xc20, 0xc21, 0xc22, 0, 0, 0, 0),
234 	D_MODULE(HCLK_CRYPTO_EIP150, "hclk_crypto_eip150", CLK_REF_SYNC_D4, 0x123, 0x124, 0x125, 0, 0x142, 0, 0),
235 	D_MODULE(HCLK_CRYPTO_EIP93, "hclk_crypto_eip93", CLK_REF_SYNC_D4, 0x120, 0x121, 0, 0x122, 0, 0x140, 0x141),
236 	D_MODULE(HCLK_DDRC, "hclk_ddrc", CLK_REF_SYNC_D4, 0x320, 0x322, 0, 0x321, 0, 0x3a0, 0x3a1),
237 	D_MODULE(HCLK_DMA0, "hclk_dma0", CLK_REF_SYNC_D4, 0x260, 0x261, 0x262, 0x263, 0x2c0, 0x2c1, 0x2c2),
238 	D_MODULE(HCLK_DMA1, "hclk_dma1", CLK_REF_SYNC_D4, 0x264, 0x265, 0x266, 0x267, 0x2c3, 0x2c4, 0x2c5),
239 	D_MODULE(HCLK_GMAC0, "hclk_gmac0", CLK_REF_SYNC_D4, 0x360, 0x361, 0x362, 0x363, 0x3c0, 0x3c1, 0x3c2),
240 	D_MODULE(HCLK_GMAC1, "hclk_gmac1", CLK_REF_SYNC_D4, 0x380, 0x381, 0x382, 0x383, 0x3e0, 0x3e1, 0x3e2),
241 	D_MODULE(HCLK_GPIO0, "hclk_gpio0", CLK_REF_SYNC_D4, 0x212, 0x213, 0x214, 0, 0, 0, 0),
242 	D_MODULE(HCLK_GPIO1, "hclk_gpio1", CLK_REF_SYNC_D4, 0x215, 0x216, 0x217, 0, 0, 0, 0),
243 	D_MODULE(HCLK_GPIO2, "hclk_gpio2", CLK_REF_SYNC_D4, 0x229, 0x22a, 0x22b, 0, 0, 0, 0),
244 	D_MODULE(HCLK_HSR, "hclk_hsr", CLK_HSR100_D2, 0x480, 0x482, 0, 0x481, 0, 0x4c0, 0x4c1),
245 	D_MODULE(HCLK_I2C0, "hclk_i2c0", CLK_REF_SYNC_D8, 0x1a9, 0x1aa, 0x1ab, 0, 0, 0, 0),
246 	D_MODULE(HCLK_I2C1, "hclk_i2c1", CLK_REF_SYNC_D8, 0x1ac, 0x1ad, 0x1ae, 0, 0, 0, 0),
247 	D_MODULE(HCLK_LCD, "hclk_lcd", CLK_REF_SYNC_D4, 0x7a0, 0x7a1, 0x7a2, 0, 0xb20, 0, 0),
248 	D_MODULE(HCLK_MSEBI_M, "hclk_msebi_m", CLK_REF_SYNC_D4, 0x164, 0x165, 0x166, 0, 0x183, 0, 0),
249 	D_MODULE(HCLK_MSEBI_S, "hclk_msebi_s", CLK_REF_SYNC_D4, 0x160, 0x161, 0x162, 0x163, 0x180, 0x181, 0x182),
250 	D_MODULE(HCLK_NAND, "hclk_nand", CLK_REF_SYNC_D4, 0x280, 0x281, 0x282, 0x283, 0x2e0, 0x2e1, 0x2e2),
251 	D_MODULE(HCLK_PG_I, "hclk_pg_i", CLK_REF_SYNC_D4, 0x7ac, 0x7ad, 0, 0x7ae, 0, 0xb24, 0xb25),
252 	D_MODULE(HCLK_PG19, "hclk_pg19", CLK_REF_SYNC_D4, 0x22c, 0x22d, 0x22e, 0, 0, 0, 0),
253 	D_MODULE(HCLK_PG20, "hclk_pg20", CLK_REF_SYNC_D4, 0x22f, 0x230, 0x231, 0, 0, 0, 0),
254 	D_MODULE(HCLK_PG3, "hclk_pg3", CLK_REF_SYNC_D4, 0x7a6, 0x7a7, 0x7a8, 0, 0xb22, 0, 0),
255 	D_MODULE(HCLK_PG4, "hclk_pg4", CLK_REF_SYNC_D4, 0x7a9, 0x7aa, 0x7ab, 0, 0xb23, 0, 0),
256 	D_MODULE(HCLK_QSPI0, "hclk_qspi0", CLK_REF_SYNC_D4, 0x2a0, 0x2a1, 0x2a2, 0x2a3, 0x300, 0x301, 0x302),
257 	D_MODULE(HCLK_QSPI1, "hclk_qspi1", CLK_REF_SYNC_D4, 0x480, 0x481, 0x482, 0x483, 0x4c0, 0x4c1, 0x4c2),
258 	D_MODULE(HCLK_ROM, "hclk_rom", CLK_REF_SYNC_D4, 0xaa0, 0xaa1, 0xaa2, 0, 0xb80, 0, 0),
259 	D_MODULE(HCLK_RTC, "hclk_rtc", CLK_REF_SYNC_D8, 0xa00, 0, 0, 0, 0, 0, 0),
260 	D_MODULE(HCLK_SDIO0, "hclk_sdio0", CLK_REF_SYNC_D4, 0x60, 0x61, 0x62, 0x63, 0x80, 0x81, 0x82),
261 	D_MODULE(HCLK_SDIO1, "hclk_sdio1", CLK_REF_SYNC_D4, 0x640, 0x641, 0x642, 0x643, 0x660, 0x661, 0x662),
262 	D_MODULE(HCLK_SEMAP, "hclk_semap", CLK_REF_SYNC_D4, 0x7a3, 0x7a4, 0x7a5, 0, 0xb21, 0, 0),
263 	D_MODULE(HCLK_SPI0, "hclk_spi0", CLK_REF_SYNC_D4, 0x200, 0x201, 0x202, 0, 0, 0, 0),
264 	D_MODULE(HCLK_SPI1, "hclk_spi1", CLK_REF_SYNC_D4, 0x203, 0x204, 0x205, 0, 0, 0, 0),
265 	D_MODULE(HCLK_SPI2, "hclk_spi2", CLK_REF_SYNC_D4, 0x206, 0x207, 0x208, 0, 0, 0, 0),
266 	D_MODULE(HCLK_SPI3, "hclk_spi3", CLK_REF_SYNC_D4, 0x209, 0x20a, 0x20b, 0, 0, 0, 0),
267 	D_MODULE(HCLK_SPI4, "hclk_spi4", CLK_REF_SYNC_D4, 0x20c, 0x20d, 0x20e, 0, 0, 0, 0),
268 	D_MODULE(HCLK_SPI5, "hclk_spi5", CLK_REF_SYNC_D4, 0x20f, 0x210, 0x211, 0, 0, 0, 0),
269 	D_MODULE(HCLK_SWITCH, "hclk_switch", CLK_REF_SYNC_D4, 0x980, 0, 0x981, 0, 0, 0, 0),
270 	D_MODULE(HCLK_SWITCH_RG, "hclk_switch_rg", CLK_REF_SYNC_D4, 0xc40, 0xc41, 0xc42, 0, 0, 0, 0),
271 	D_MODULE(HCLK_UART0, "hclk_uart0", CLK_REF_SYNC_D8, 0x1a0, 0x1a1, 0x1a2, 0, 0, 0, 0),
272 	D_MODULE(HCLK_UART1, "hclk_uart1", CLK_REF_SYNC_D8, 0x1a3, 0x1a4, 0x1a5, 0, 0, 0, 0),
273 	D_MODULE(HCLK_UART2, "hclk_uart2", CLK_REF_SYNC_D8, 0x1a6, 0x1a7, 0x1a8, 0, 0, 0, 0),
274 	D_MODULE(HCLK_UART3, "hclk_uart3", CLK_REF_SYNC_D4, 0x218, 0x219, 0x21a, 0, 0, 0, 0),
275 	D_MODULE(HCLK_UART4, "hclk_uart4", CLK_REF_SYNC_D4, 0x21b, 0x21c, 0x21d, 0, 0, 0, 0),
276 	D_MODULE(HCLK_UART5, "hclk_uart5", CLK_REF_SYNC_D4, 0x220, 0x221, 0x222, 0, 0, 0, 0),
277 	D_MODULE(HCLK_UART6, "hclk_uart6", CLK_REF_SYNC_D4, 0x223, 0x224, 0x225, 0, 0, 0, 0),
278 	D_MODULE(HCLK_UART7, "hclk_uart7", CLK_REF_SYNC_D4, 0x226, 0x227, 0x228, 0, 0, 0, 0),
279 	/*
280 	 * These are not hardware clocks, but are needed to handle the special
281 	 * case where we have a 'selector bit' that doesn't just change the
282 	 * parent for a clock, but also the gate it's suposed to use.
283 	 */
284 	{
285 		.index = R9A06G032_UART_GROUP_012,
286 		.name = "uart_group_012",
287 		.type = K_BITSEL,
288 		.source = 1 + R9A06G032_DIV_UART,
289 		/* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */
290 		.dual.sel = ((0xec / 4) << 5) | 24,
291 		.dual.group = 0,
292 	},
293 	{
294 		.index = R9A06G032_UART_GROUP_34567,
295 		.name = "uart_group_34567",
296 		.type = K_BITSEL,
297 		.source = 1 + R9A06G032_DIV_P2_PG,
298 		/* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */
299 		.dual.sel = ((0x34 / 4) << 5) | 30,
300 		.dual.group = 1,
301 	},
302 	D_UGATE(CLK_UART0, "clk_uart0", UART_GROUP_012, 0, 0, 0x1b2, 0x1b3, 0x1b4, 0x1b5),
303 	D_UGATE(CLK_UART1, "clk_uart1", UART_GROUP_012, 0, 1, 0x1b6, 0x1b7, 0x1b8, 0x1b9),
304 	D_UGATE(CLK_UART2, "clk_uart2", UART_GROUP_012, 0, 2, 0x1ba, 0x1bb, 0x1bc, 0x1bd),
305 	D_UGATE(CLK_UART3, "clk_uart3", UART_GROUP_34567, 1, 0, 0x760, 0x761, 0x762, 0x763),
306 	D_UGATE(CLK_UART4, "clk_uart4", UART_GROUP_34567, 1, 1, 0x764, 0x765, 0x766, 0x767),
307 	D_UGATE(CLK_UART5, "clk_uart5", UART_GROUP_34567, 1, 2, 0x768, 0x769, 0x76a, 0x76b),
308 	D_UGATE(CLK_UART6, "clk_uart6", UART_GROUP_34567, 1, 3, 0x76c, 0x76d, 0x76e, 0x76f),
309 	D_UGATE(CLK_UART7, "clk_uart7", UART_GROUP_34567, 1, 4, 0x770, 0x771, 0x772, 0x773),
310 };
311 
312 struct r9a06g032_priv {
313 	struct clk_onecell_data data;
314 	spinlock_t lock; /* protects concurent access to gates */
315 	void __iomem *reg;
316 };
317 
318 /* register/bit pairs are encoded as an uint16_t */
319 static void
320 clk_rdesc_set(struct r9a06g032_priv *clocks,
321 	      u16 one, unsigned int on)
322 {
323 	u32 __iomem *reg = clocks->reg + (4 * (one >> 5));
324 	u32 val = readl(reg);
325 
326 	val = (val & ~(1U << (one & 0x1f))) | ((!!on) << (one & 0x1f));
327 	writel(val, reg);
328 }
329 
330 static int
331 clk_rdesc_get(struct r9a06g032_priv *clocks,
332 	      uint16_t one)
333 {
334 	u32 __iomem *reg = clocks->reg + (4 * (one >> 5));
335 	u32 val = readl(reg);
336 
337 	return !!(val & (1U << (one & 0x1f)));
338 }
339 
340 /*
341  * This implements the R9A06G032 clock gate 'driver'. We cannot use the system's
342  * clock gate framework as the gates on the R9A06G032 have a special enabling
343  * sequence, therefore we use this little proxy.
344  */
345 struct r9a06g032_clk_gate {
346 	struct clk_hw hw;
347 	struct r9a06g032_priv *clocks;
348 	u16 index;
349 
350 	struct r9a06g032_gate gate;
351 };
352 
353 #define to_r9a06g032_gate(_hw) container_of(_hw, struct r9a06g032_clk_gate, hw)
354 
355 static int create_add_module_clock(struct of_phandle_args *clkspec,
356 				   struct device *dev)
357 {
358 	struct clk *clk;
359 	int error;
360 
361 	clk = of_clk_get_from_provider(clkspec);
362 	if (IS_ERR(clk))
363 		return PTR_ERR(clk);
364 
365 	error = pm_clk_create(dev);
366 	if (error) {
367 		clk_put(clk);
368 		return error;
369 	}
370 
371 	error = pm_clk_add_clk(dev, clk);
372 	if (error) {
373 		pm_clk_destroy(dev);
374 		clk_put(clk);
375 	}
376 
377 	return error;
378 }
379 
380 static int r9a06g032_attach_dev(struct generic_pm_domain *pd,
381 				struct device *dev)
382 {
383 	struct device_node *np = dev->of_node;
384 	struct of_phandle_args clkspec;
385 	int i = 0;
386 	int error;
387 	int index;
388 
389 	while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i,
390 					   &clkspec)) {
391 		if (clkspec.np != pd->dev.of_node)
392 			continue;
393 
394 		index = clkspec.args[0];
395 		if (index < R9A06G032_CLOCK_COUNT &&
396 		    r9a06g032_clocks[index].managed) {
397 			error = create_add_module_clock(&clkspec, dev);
398 			of_node_put(clkspec.np);
399 			if (error)
400 				return error;
401 		}
402 		i++;
403 	}
404 
405 	return 0;
406 }
407 
408 static void r9a06g032_detach_dev(struct generic_pm_domain *unused, struct device *dev)
409 {
410 	if (!pm_clk_no_clocks(dev))
411 		pm_clk_destroy(dev);
412 }
413 
414 static int r9a06g032_add_clk_domain(struct device *dev)
415 {
416 	struct device_node *np = dev->of_node;
417 	struct generic_pm_domain *pd;
418 
419 	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
420 	if (!pd)
421 		return -ENOMEM;
422 
423 	pd->name = np->name;
424 	pd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_ALWAYS_ON |
425 		    GENPD_FLAG_ACTIVE_WAKEUP;
426 	pd->attach_dev = r9a06g032_attach_dev;
427 	pd->detach_dev = r9a06g032_detach_dev;
428 	pm_genpd_init(pd, &pm_domain_always_on_gov, false);
429 
430 	of_genpd_add_provider_simple(np, pd);
431 	return 0;
432 }
433 
434 static void
435 r9a06g032_clk_gate_set(struct r9a06g032_priv *clocks,
436 		       struct r9a06g032_gate *g, int on)
437 {
438 	unsigned long flags;
439 
440 	WARN_ON(!g->gate);
441 
442 	spin_lock_irqsave(&clocks->lock, flags);
443 	clk_rdesc_set(clocks, g->gate, on);
444 	/* De-assert reset */
445 	if (g->reset)
446 		clk_rdesc_set(clocks, g->reset, 1);
447 	spin_unlock_irqrestore(&clocks->lock, flags);
448 
449 	/* Hardware manual recommends 5us delay after enabling clock & reset */
450 	udelay(5);
451 
452 	/* If the peripheral is memory mapped (i.e. an AXI slave), there is an
453 	 * associated SLVRDY bit in the System Controller that needs to be set
454 	 * so that the FlexWAY bus fabric passes on the read/write requests.
455 	 */
456 	if (g->ready || g->midle) {
457 		spin_lock_irqsave(&clocks->lock, flags);
458 		if (g->ready)
459 			clk_rdesc_set(clocks, g->ready, on);
460 		/* Clear 'Master Idle Request' bit */
461 		if (g->midle)
462 			clk_rdesc_set(clocks, g->midle, !on);
463 		spin_unlock_irqrestore(&clocks->lock, flags);
464 	}
465 	/* Note: We don't wait for FlexWAY Socket Connection signal */
466 }
467 
468 static int r9a06g032_clk_gate_enable(struct clk_hw *hw)
469 {
470 	struct r9a06g032_clk_gate *g = to_r9a06g032_gate(hw);
471 
472 	r9a06g032_clk_gate_set(g->clocks, &g->gate, 1);
473 	return 0;
474 }
475 
476 static void r9a06g032_clk_gate_disable(struct clk_hw *hw)
477 {
478 	struct r9a06g032_clk_gate *g = to_r9a06g032_gate(hw);
479 
480 	r9a06g032_clk_gate_set(g->clocks, &g->gate, 0);
481 }
482 
483 static int r9a06g032_clk_gate_is_enabled(struct clk_hw *hw)
484 {
485 	struct r9a06g032_clk_gate *g = to_r9a06g032_gate(hw);
486 
487 	/* if clock is in reset, the gate might be on, and still not 'be' on */
488 	if (g->gate.reset && !clk_rdesc_get(g->clocks, g->gate.reset))
489 		return 0;
490 
491 	return clk_rdesc_get(g->clocks, g->gate.gate);
492 }
493 
494 static const struct clk_ops r9a06g032_clk_gate_ops = {
495 	.enable = r9a06g032_clk_gate_enable,
496 	.disable = r9a06g032_clk_gate_disable,
497 	.is_enabled = r9a06g032_clk_gate_is_enabled,
498 };
499 
500 static struct clk *
501 r9a06g032_register_gate(struct r9a06g032_priv *clocks,
502 			const char *parent_name,
503 			const struct r9a06g032_clkdesc *desc)
504 {
505 	struct clk *clk;
506 	struct r9a06g032_clk_gate *g;
507 	struct clk_init_data init;
508 
509 	g = kzalloc(sizeof(*g), GFP_KERNEL);
510 	if (!g)
511 		return NULL;
512 
513 	init.name = desc->name;
514 	init.ops = &r9a06g032_clk_gate_ops;
515 	init.flags = CLK_SET_RATE_PARENT;
516 	init.parent_names = parent_name ? &parent_name : NULL;
517 	init.num_parents = parent_name ? 1 : 0;
518 
519 	g->clocks = clocks;
520 	g->index = desc->index;
521 	g->gate = desc->gate;
522 	g->hw.init = &init;
523 
524 	/*
525 	 * important here, some clocks are already in use by the CM3, we
526 	 * have to assume they are not Linux's to play with and try to disable
527 	 * at the end of the boot!
528 	 */
529 	if (r9a06g032_clk_gate_is_enabled(&g->hw)) {
530 		init.flags |= CLK_IS_CRITICAL;
531 		pr_debug("%s was enabled, making read-only\n", desc->name);
532 	}
533 
534 	clk = clk_register(NULL, &g->hw);
535 	if (IS_ERR(clk)) {
536 		kfree(g);
537 		return NULL;
538 	}
539 	return clk;
540 }
541 
542 struct r9a06g032_clk_div {
543 	struct clk_hw hw;
544 	struct r9a06g032_priv *clocks;
545 	u16 index;
546 	u16 reg;
547 	u16 min, max;
548 	u8 table_size;
549 	u16 table[8];	/* we know there are no more than 8 */
550 };
551 
552 #define to_r9a06g032_div(_hw) \
553 		container_of(_hw, struct r9a06g032_clk_div, hw)
554 
555 static unsigned long
556 r9a06g032_div_recalc_rate(struct clk_hw *hw,
557 			  unsigned long parent_rate)
558 {
559 	struct r9a06g032_clk_div *clk = to_r9a06g032_div(hw);
560 	u32 __iomem *reg = clk->clocks->reg + (4 * clk->reg);
561 	u32 div = readl(reg);
562 
563 	if (div < clk->min)
564 		div = clk->min;
565 	else if (div > clk->max)
566 		div = clk->max;
567 	return DIV_ROUND_UP(parent_rate, div);
568 }
569 
570 /*
571  * Attempts to find a value that is in range of min,max,
572  * and if a table of set dividers was specified for this
573  * register, try to find the fixed divider that is the closest
574  * to the target frequency
575  */
576 static long
577 r9a06g032_div_clamp_div(struct r9a06g032_clk_div *clk,
578 			unsigned long rate, unsigned long prate)
579 {
580 	/* + 1 to cope with rates that have the remainder dropped */
581 	u32 div = DIV_ROUND_UP(prate, rate + 1);
582 	int i;
583 
584 	if (div <= clk->min)
585 		return clk->min;
586 	if (div >= clk->max)
587 		return clk->max;
588 
589 	for (i = 0; clk->table_size && i < clk->table_size - 1; i++) {
590 		if (div >= clk->table[i] && div <= clk->table[i + 1]) {
591 			unsigned long m = rate -
592 				DIV_ROUND_UP(prate, clk->table[i]);
593 			unsigned long p =
594 				DIV_ROUND_UP(prate, clk->table[i + 1]) -
595 				rate;
596 			/*
597 			 * select the divider that generates
598 			 * the value closest to the ideal frequency
599 			 */
600 			div = p >= m ? clk->table[i] : clk->table[i + 1];
601 			return div;
602 		}
603 	}
604 	return div;
605 }
606 
607 static long
608 r9a06g032_div_round_rate(struct clk_hw *hw,
609 			 unsigned long rate, unsigned long *prate)
610 {
611 	struct r9a06g032_clk_div *clk = to_r9a06g032_div(hw);
612 	u32 div = DIV_ROUND_UP(*prate, rate);
613 
614 	pr_devel("%s %pC %ld (prate %ld) (wanted div %u)\n", __func__,
615 		 hw->clk, rate, *prate, div);
616 	pr_devel("   min %d (%ld) max %d (%ld)\n",
617 		 clk->min, DIV_ROUND_UP(*prate, clk->min),
618 		clk->max, DIV_ROUND_UP(*prate, clk->max));
619 
620 	div = r9a06g032_div_clamp_div(clk, rate, *prate);
621 	/*
622 	 * this is a hack. Currently the serial driver asks for a clock rate
623 	 * that is 16 times the baud rate -- and that is wildly outside the
624 	 * range of the UART divider, somehow there is no provision for that
625 	 * case of 'let the divider as is if outside range'.
626 	 * The serial driver *shouldn't* play with these clocks anyway, there's
627 	 * several uarts attached to this divider, and changing this impacts
628 	 * everyone.
629 	 */
630 	if (clk->index == R9A06G032_DIV_UART ||
631 	    clk->index == R9A06G032_DIV_P2_PG) {
632 		pr_devel("%s div uart hack!\n", __func__);
633 		return clk_get_rate(hw->clk);
634 	}
635 	pr_devel("%s %pC %ld / %u = %ld\n", __func__, hw->clk,
636 		 *prate, div, DIV_ROUND_UP(*prate, div));
637 	return DIV_ROUND_UP(*prate, div);
638 }
639 
640 static int
641 r9a06g032_div_set_rate(struct clk_hw *hw,
642 		       unsigned long rate, unsigned long parent_rate)
643 {
644 	struct r9a06g032_clk_div *clk = to_r9a06g032_div(hw);
645 	/* + 1 to cope with rates that have the remainder dropped */
646 	u32 div = DIV_ROUND_UP(parent_rate, rate + 1);
647 	u32 __iomem *reg = clk->clocks->reg + (4 * clk->reg);
648 
649 	pr_devel("%s %pC rate %ld parent %ld div %d\n", __func__, hw->clk,
650 		 rate, parent_rate, div);
651 
652 	/*
653 	 * Need to write the bit 31 with the divider value to
654 	 * latch it. Technically we should wait until it has been
655 	 * cleared too.
656 	 * TODO: Find whether this callback is sleepable, in case
657 	 * the hardware /does/ require some sort of spinloop here.
658 	 */
659 	writel(div | BIT(31), reg);
660 
661 	return 0;
662 }
663 
664 static const struct clk_ops r9a06g032_clk_div_ops = {
665 	.recalc_rate = r9a06g032_div_recalc_rate,
666 	.round_rate = r9a06g032_div_round_rate,
667 	.set_rate = r9a06g032_div_set_rate,
668 };
669 
670 static struct clk *
671 r9a06g032_register_div(struct r9a06g032_priv *clocks,
672 		       const char *parent_name,
673 		       const struct r9a06g032_clkdesc *desc)
674 {
675 	struct r9a06g032_clk_div *div;
676 	struct clk *clk;
677 	struct clk_init_data init;
678 	unsigned int i;
679 
680 	div = kzalloc(sizeof(*div), GFP_KERNEL);
681 	if (!div)
682 		return NULL;
683 
684 	init.name = desc->name;
685 	init.ops = &r9a06g032_clk_div_ops;
686 	init.flags = CLK_SET_RATE_PARENT;
687 	init.parent_names = parent_name ? &parent_name : NULL;
688 	init.num_parents = parent_name ? 1 : 0;
689 
690 	div->clocks = clocks;
691 	div->index = desc->index;
692 	div->reg = desc->reg;
693 	div->hw.init = &init;
694 	div->min = desc->div_min;
695 	div->max = desc->div_max;
696 	/* populate (optional) divider table fixed values */
697 	for (i = 0; i < ARRAY_SIZE(div->table) &&
698 	     i < ARRAY_SIZE(desc->div_table) && desc->div_table[i]; i++) {
699 		div->table[div->table_size++] = desc->div_table[i];
700 	}
701 
702 	clk = clk_register(NULL, &div->hw);
703 	if (IS_ERR(clk)) {
704 		kfree(div);
705 		return NULL;
706 	}
707 	return clk;
708 }
709 
710 /*
711  * This clock provider handles the case of the R9A06G032 where you have
712  * peripherals that have two potential clock source and two gates, one for
713  * each of the clock source - the used clock source (for all sub clocks)
714  * is selected by a single bit.
715  * That single bit affects all sub-clocks, and therefore needs to change the
716  * active gate (and turn the others off) and force a recalculation of the rates.
717  *
718  * This implements two clock providers, one 'bitselect' that
719  * handles the switch between both parents, and another 'dualgate'
720  * that knows which gate to poke at, depending on the parent's bit position.
721  */
722 struct r9a06g032_clk_bitsel {
723 	struct clk_hw	hw;
724 	struct r9a06g032_priv *clocks;
725 	u16 index;
726 	u16 selector;		/* selector register + bit */
727 };
728 
729 #define to_clk_bitselect(_hw) \
730 		container_of(_hw, struct r9a06g032_clk_bitsel, hw)
731 
732 static u8 r9a06g032_clk_mux_get_parent(struct clk_hw *hw)
733 {
734 	struct r9a06g032_clk_bitsel *set = to_clk_bitselect(hw);
735 
736 	return clk_rdesc_get(set->clocks, set->selector);
737 }
738 
739 static int r9a06g032_clk_mux_set_parent(struct clk_hw *hw, u8 index)
740 {
741 	struct r9a06g032_clk_bitsel *set = to_clk_bitselect(hw);
742 
743 	/* a single bit in the register selects one of two parent clocks */
744 	clk_rdesc_set(set->clocks, set->selector, !!index);
745 
746 	return 0;
747 }
748 
749 static const struct clk_ops clk_bitselect_ops = {
750 	.get_parent = r9a06g032_clk_mux_get_parent,
751 	.set_parent = r9a06g032_clk_mux_set_parent,
752 };
753 
754 static struct clk *
755 r9a06g032_register_bitsel(struct r9a06g032_priv *clocks,
756 			  const char *parent_name,
757 			  const struct r9a06g032_clkdesc *desc)
758 {
759 	struct clk *clk;
760 	struct r9a06g032_clk_bitsel *g;
761 	struct clk_init_data init;
762 	const char *names[2];
763 
764 	/* allocate the gate */
765 	g = kzalloc(sizeof(*g), GFP_KERNEL);
766 	if (!g)
767 		return NULL;
768 
769 	names[0] = parent_name;
770 	names[1] = "clk_pll_usb";
771 
772 	init.name = desc->name;
773 	init.ops = &clk_bitselect_ops;
774 	init.flags = CLK_SET_RATE_PARENT;
775 	init.parent_names = names;
776 	init.num_parents = 2;
777 
778 	g->clocks = clocks;
779 	g->index = desc->index;
780 	g->selector = desc->dual.sel;
781 	g->hw.init = &init;
782 
783 	clk = clk_register(NULL, &g->hw);
784 	if (IS_ERR(clk)) {
785 		kfree(g);
786 		return NULL;
787 	}
788 	return clk;
789 }
790 
791 struct r9a06g032_clk_dualgate {
792 	struct clk_hw	hw;
793 	struct r9a06g032_priv *clocks;
794 	u16 index;
795 	u16 selector;		/* selector register + bit */
796 	struct r9a06g032_gate gate[2];
797 };
798 
799 #define to_clk_dualgate(_hw) \
800 		container_of(_hw, struct r9a06g032_clk_dualgate, hw)
801 
802 static int
803 r9a06g032_clk_dualgate_setenable(struct r9a06g032_clk_dualgate *g, int enable)
804 {
805 	u8 sel_bit = clk_rdesc_get(g->clocks, g->selector);
806 
807 	/* we always turn off the 'other' gate, regardless */
808 	r9a06g032_clk_gate_set(g->clocks, &g->gate[!sel_bit], 0);
809 	r9a06g032_clk_gate_set(g->clocks, &g->gate[sel_bit], enable);
810 
811 	return 0;
812 }
813 
814 static int r9a06g032_clk_dualgate_enable(struct clk_hw *hw)
815 {
816 	struct r9a06g032_clk_dualgate *gate = to_clk_dualgate(hw);
817 
818 	r9a06g032_clk_dualgate_setenable(gate, 1);
819 
820 	return 0;
821 }
822 
823 static void r9a06g032_clk_dualgate_disable(struct clk_hw *hw)
824 {
825 	struct r9a06g032_clk_dualgate *gate = to_clk_dualgate(hw);
826 
827 	r9a06g032_clk_dualgate_setenable(gate, 0);
828 }
829 
830 static int r9a06g032_clk_dualgate_is_enabled(struct clk_hw *hw)
831 {
832 	struct r9a06g032_clk_dualgate *g = to_clk_dualgate(hw);
833 	u8 sel_bit = clk_rdesc_get(g->clocks, g->selector);
834 
835 	return clk_rdesc_get(g->clocks, g->gate[sel_bit].gate);
836 }
837 
838 static const struct clk_ops r9a06g032_clk_dualgate_ops = {
839 	.enable = r9a06g032_clk_dualgate_enable,
840 	.disable = r9a06g032_clk_dualgate_disable,
841 	.is_enabled = r9a06g032_clk_dualgate_is_enabled,
842 };
843 
844 static struct clk *
845 r9a06g032_register_dualgate(struct r9a06g032_priv *clocks,
846 			    const char *parent_name,
847 			    const struct r9a06g032_clkdesc *desc,
848 			    uint16_t sel)
849 {
850 	struct r9a06g032_clk_dualgate *g;
851 	struct clk *clk;
852 	struct clk_init_data init;
853 
854 	/* allocate the gate */
855 	g = kzalloc(sizeof(*g), GFP_KERNEL);
856 	if (!g)
857 		return NULL;
858 	g->clocks = clocks;
859 	g->index = desc->index;
860 	g->selector = sel;
861 	g->gate[0].gate = desc->dual.g1;
862 	g->gate[0].reset = desc->dual.r1;
863 	g->gate[1].gate = desc->dual.g2;
864 	g->gate[1].reset = desc->dual.r2;
865 
866 	init.name = desc->name;
867 	init.ops = &r9a06g032_clk_dualgate_ops;
868 	init.flags = CLK_SET_RATE_PARENT;
869 	init.parent_names = &parent_name;
870 	init.num_parents = 1;
871 	g->hw.init = &init;
872 	/*
873 	 * important here, some clocks are already in use by the CM3, we
874 	 * have to assume they are not Linux's to play with and try to disable
875 	 * at the end of the boot!
876 	 */
877 	if (r9a06g032_clk_dualgate_is_enabled(&g->hw)) {
878 		init.flags |= CLK_IS_CRITICAL;
879 		pr_debug("%s was enabled, making read-only\n", desc->name);
880 	}
881 
882 	clk = clk_register(NULL, &g->hw);
883 	if (IS_ERR(clk)) {
884 		kfree(g);
885 		return NULL;
886 	}
887 	return clk;
888 }
889 
890 static void r9a06g032_clocks_del_clk_provider(void *data)
891 {
892 	of_clk_del_provider(data);
893 }
894 
895 static int __init r9a06g032_clocks_probe(struct platform_device *pdev)
896 {
897 	struct device *dev = &pdev->dev;
898 	struct device_node *np = dev->of_node;
899 	struct r9a06g032_priv *clocks;
900 	struct clk **clks;
901 	struct clk *mclk;
902 	unsigned int i;
903 	u16 uart_group_sel[2];
904 	int error;
905 
906 	clocks = devm_kzalloc(dev, sizeof(*clocks), GFP_KERNEL);
907 	clks = devm_kcalloc(dev, R9A06G032_CLOCK_COUNT, sizeof(struct clk *),
908 			    GFP_KERNEL);
909 	if (!clocks || !clks)
910 		return -ENOMEM;
911 
912 	spin_lock_init(&clocks->lock);
913 
914 	clocks->data.clks = clks;
915 	clocks->data.clk_num = R9A06G032_CLOCK_COUNT;
916 
917 	mclk = devm_clk_get(dev, "mclk");
918 	if (IS_ERR(mclk))
919 		return PTR_ERR(mclk);
920 
921 	clocks->reg = of_iomap(np, 0);
922 	if (WARN_ON(!clocks->reg))
923 		return -ENOMEM;
924 	for (i = 0; i < ARRAY_SIZE(r9a06g032_clocks); ++i) {
925 		const struct r9a06g032_clkdesc *d = &r9a06g032_clocks[i];
926 		const char *parent_name = d->source ?
927 			__clk_get_name(clocks->data.clks[d->source - 1]) :
928 			__clk_get_name(mclk);
929 		struct clk *clk = NULL;
930 
931 		switch (d->type) {
932 		case K_FFC:
933 			clk = clk_register_fixed_factor(NULL, d->name,
934 							parent_name, 0,
935 							d->mul, d->div);
936 			break;
937 		case K_GATE:
938 			clk = r9a06g032_register_gate(clocks, parent_name, d);
939 			break;
940 		case K_DIV:
941 			clk = r9a06g032_register_div(clocks, parent_name, d);
942 			break;
943 		case K_BITSEL:
944 			/* keep that selector register around */
945 			uart_group_sel[d->dual.group] = d->dual.sel;
946 			clk = r9a06g032_register_bitsel(clocks, parent_name, d);
947 			break;
948 		case K_DUALGATE:
949 			clk = r9a06g032_register_dualgate(clocks, parent_name,
950 							  d,
951 							  uart_group_sel[d->dual.group]);
952 			break;
953 		}
954 		clocks->data.clks[d->index] = clk;
955 	}
956 	error = of_clk_add_provider(np, of_clk_src_onecell_get, &clocks->data);
957 	if (error)
958 		return error;
959 
960 	error = devm_add_action_or_reset(dev,
961 					r9a06g032_clocks_del_clk_provider, np);
962 	if (error)
963 		return error;
964 
965 	return r9a06g032_add_clk_domain(dev);
966 }
967 
968 static const struct of_device_id r9a06g032_match[] = {
969 	{ .compatible = "renesas,r9a06g032-sysctrl" },
970 	{ }
971 };
972 
973 static struct platform_driver r9a06g032_clock_driver = {
974 	.driver		= {
975 		.name	= "renesas,r9a06g032-sysctrl",
976 		.of_match_table = r9a06g032_match,
977 	},
978 };
979 
980 static int __init r9a06g032_clocks_init(void)
981 {
982 	return platform_driver_probe(&r9a06g032_clock_driver,
983 			r9a06g032_clocks_probe);
984 }
985 
986 subsys_initcall(r9a06g032_clocks_init);
987