1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * R9A06G032 clock driver 4 * 5 * Copyright (C) 2018 Renesas Electronics Europe Limited 6 * 7 * Michel Pollet <michel.pollet@bp.renesas.com>, <buserror@gmail.com> 8 */ 9 10 #include <linux/clk.h> 11 #include <linux/clk-provider.h> 12 #include <linux/delay.h> 13 #include <linux/init.h> 14 #include <linux/io.h> 15 #include <linux/kernel.h> 16 #include <linux/math64.h> 17 #include <linux/of.h> 18 #include <linux/of_address.h> 19 #include <linux/platform_device.h> 20 #include <linux/pm_clock.h> 21 #include <linux/pm_domain.h> 22 #include <linux/slab.h> 23 #include <linux/spinlock.h> 24 #include <dt-bindings/clock/r9a06g032-sysctrl.h> 25 26 struct r9a06g032_gate { 27 u16 gate, reset, ready, midle, 28 scon, mirack, mistat; 29 }; 30 31 /* This is used to describe a clock for instantiation */ 32 struct r9a06g032_clkdesc { 33 const char *name; 34 uint32_t managed: 1; 35 uint32_t type: 3; 36 uint32_t index: 8; 37 uint32_t source : 8; /* source index + 1 (0 == none) */ 38 /* these are used to populate the bitsel struct */ 39 union { 40 struct r9a06g032_gate gate; 41 /* for dividers */ 42 struct { 43 unsigned int div_min : 10, div_max : 10, reg: 10; 44 u16 div_table[4]; 45 }; 46 /* For fixed-factor ones */ 47 struct { 48 u16 div, mul; 49 }; 50 unsigned int factor; 51 unsigned int frequency; 52 /* for dual gate */ 53 struct { 54 uint16_t group : 1, index: 3; 55 u16 sel, g1, r1, g2, r2; 56 } dual; 57 }; 58 } __packed; 59 60 #define I_GATE(_clk, _rst, _rdy, _midle, _scon, _mirack, _mistat) \ 61 { .gate = _clk, .reset = _rst, \ 62 .ready = _rdy, .midle = _midle, \ 63 .scon = _scon, .mirack = _mirack, .mistat = _mistat } 64 #define D_GATE(_idx, _n, _src, ...) \ 65 { .type = K_GATE, .index = R9A06G032_##_idx, \ 66 .source = 1 + R9A06G032_##_src, .name = _n, \ 67 .gate = I_GATE(__VA_ARGS__) } 68 #define D_MODULE(_idx, _n, _src, ...) \ 69 { .type = K_GATE, .index = R9A06G032_##_idx, \ 70 .source = 1 + R9A06G032_##_src, .name = _n, \ 71 .managed = 1, .gate = I_GATE(__VA_ARGS__) } 72 #define D_ROOT(_idx, _n, _mul, _div) \ 73 { .type = K_FFC, .index = R9A06G032_##_idx, .name = _n, \ 74 .div = _div, .mul = _mul } 75 #define D_FFC(_idx, _n, _src, _div) \ 76 { .type = K_FFC, .index = R9A06G032_##_idx, \ 77 .source = 1 + R9A06G032_##_src, .name = _n, \ 78 .div = _div, .mul = 1} 79 #define D_DIV(_idx, _n, _src, _reg, _min, _max, ...) \ 80 { .type = K_DIV, .index = R9A06G032_##_idx, \ 81 .source = 1 + R9A06G032_##_src, .name = _n, \ 82 .reg = _reg, .div_min = _min, .div_max = _max, \ 83 .div_table = { __VA_ARGS__ } } 84 #define D_UGATE(_idx, _n, _src, _g, _gi, _g1, _r1, _g2, _r2) \ 85 { .type = K_DUALGATE, .index = R9A06G032_##_idx, \ 86 .source = 1 + R9A06G032_##_src, .name = _n, \ 87 .dual = { .group = _g, .index = _gi, \ 88 .g1 = _g1, .r1 = _r1, .g2 = _g2, .r2 = _r2 }, } 89 90 enum { K_GATE = 0, K_FFC, K_DIV, K_BITSEL, K_DUALGATE }; 91 92 /* Internal clock IDs */ 93 #define R9A06G032_CLKOUT 0 94 #define R9A06G032_CLKOUT_D10 2 95 #define R9A06G032_CLKOUT_D16 3 96 #define R9A06G032_CLKOUT_D160 4 97 #define R9A06G032_CLKOUT_D1OR2 5 98 #define R9A06G032_CLKOUT_D20 6 99 #define R9A06G032_CLKOUT_D40 7 100 #define R9A06G032_CLKOUT_D5 8 101 #define R9A06G032_CLKOUT_D8 9 102 #define R9A06G032_DIV_ADC 10 103 #define R9A06G032_DIV_I2C 11 104 #define R9A06G032_DIV_NAND 12 105 #define R9A06G032_DIV_P1_PG 13 106 #define R9A06G032_DIV_P2_PG 14 107 #define R9A06G032_DIV_P3_PG 15 108 #define R9A06G032_DIV_P4_PG 16 109 #define R9A06G032_DIV_P5_PG 17 110 #define R9A06G032_DIV_P6_PG 18 111 #define R9A06G032_DIV_QSPI0 19 112 #define R9A06G032_DIV_QSPI1 20 113 #define R9A06G032_DIV_REF_SYNC 21 114 #define R9A06G032_DIV_SDIO0 22 115 #define R9A06G032_DIV_SDIO1 23 116 #define R9A06G032_DIV_SWITCH 24 117 #define R9A06G032_DIV_UART 25 118 #define R9A06G032_DIV_MOTOR 64 119 #define R9A06G032_CLK_DDRPHY_PLLCLK_D4 78 120 #define R9A06G032_CLK_ECAT100_D4 79 121 #define R9A06G032_CLK_HSR100_D2 80 122 #define R9A06G032_CLK_REF_SYNC_D4 81 123 #define R9A06G032_CLK_REF_SYNC_D8 82 124 #define R9A06G032_CLK_SERCOS100_D2 83 125 #define R9A06G032_DIV_CA7 84 126 127 #define R9A06G032_UART_GROUP_012 154 128 #define R9A06G032_UART_GROUP_34567 155 129 130 #define R9A06G032_CLOCK_COUNT (R9A06G032_UART_GROUP_34567 + 1) 131 132 static const struct r9a06g032_clkdesc r9a06g032_clocks[] = { 133 D_ROOT(CLKOUT, "clkout", 25, 1), 134 D_ROOT(CLK_PLL_USB, "clk_pll_usb", 12, 10), 135 D_FFC(CLKOUT_D10, "clkout_d10", CLKOUT, 10), 136 D_FFC(CLKOUT_D16, "clkout_d16", CLKOUT, 16), 137 D_FFC(CLKOUT_D160, "clkout_d160", CLKOUT, 160), 138 D_DIV(CLKOUT_D1OR2, "clkout_d1or2", CLKOUT, 0, 1, 2), 139 D_FFC(CLKOUT_D20, "clkout_d20", CLKOUT, 20), 140 D_FFC(CLKOUT_D40, "clkout_d40", CLKOUT, 40), 141 D_FFC(CLKOUT_D5, "clkout_d5", CLKOUT, 5), 142 D_FFC(CLKOUT_D8, "clkout_d8", CLKOUT, 8), 143 D_DIV(DIV_ADC, "div_adc", CLKOUT, 77, 50, 250), 144 D_DIV(DIV_I2C, "div_i2c", CLKOUT, 78, 12, 16), 145 D_DIV(DIV_NAND, "div_nand", CLKOUT, 82, 12, 32), 146 D_DIV(DIV_P1_PG, "div_p1_pg", CLKOUT, 68, 12, 200), 147 D_DIV(DIV_P2_PG, "div_p2_pg", CLKOUT, 62, 12, 128), 148 D_DIV(DIV_P3_PG, "div_p3_pg", CLKOUT, 64, 8, 128), 149 D_DIV(DIV_P4_PG, "div_p4_pg", CLKOUT, 66, 8, 128), 150 D_DIV(DIV_P5_PG, "div_p5_pg", CLKOUT, 71, 10, 40), 151 D_DIV(DIV_P6_PG, "div_p6_pg", CLKOUT, 18, 12, 64), 152 D_DIV(DIV_QSPI0, "div_qspi0", CLKOUT, 73, 3, 7), 153 D_DIV(DIV_QSPI1, "div_qspi1", CLKOUT, 25, 3, 7), 154 D_DIV(DIV_REF_SYNC, "div_ref_sync", CLKOUT, 56, 2, 16, 2, 4, 8, 16), 155 D_DIV(DIV_SDIO0, "div_sdio0", CLKOUT, 74, 20, 128), 156 D_DIV(DIV_SDIO1, "div_sdio1", CLKOUT, 75, 20, 128), 157 D_DIV(DIV_SWITCH, "div_switch", CLKOUT, 37, 5, 40), 158 D_DIV(DIV_UART, "div_uart", CLKOUT, 79, 12, 128), 159 D_GATE(CLK_25_PG4, "clk_25_pg4", CLKOUT_D40, 0x749, 0x74a, 0x74b, 0, 0xae3, 0, 0), 160 D_GATE(CLK_25_PG5, "clk_25_pg5", CLKOUT_D40, 0x74c, 0x74d, 0x74e, 0, 0xae4, 0, 0), 161 D_GATE(CLK_25_PG6, "clk_25_pg6", CLKOUT_D40, 0x74f, 0x750, 0x751, 0, 0xae5, 0, 0), 162 D_GATE(CLK_25_PG7, "clk_25_pg7", CLKOUT_D40, 0x752, 0x753, 0x754, 0, 0xae6, 0, 0), 163 D_GATE(CLK_25_PG8, "clk_25_pg8", CLKOUT_D40, 0x755, 0x756, 0x757, 0, 0xae7, 0, 0), 164 D_GATE(CLK_ADC, "clk_adc", DIV_ADC, 0x1ea, 0x1eb, 0, 0, 0, 0, 0), 165 D_GATE(CLK_ECAT100, "clk_ecat100", CLKOUT_D10, 0x405, 0, 0, 0, 0, 0, 0), 166 D_GATE(CLK_HSR100, "clk_hsr100", CLKOUT_D10, 0x483, 0, 0, 0, 0, 0, 0), 167 D_GATE(CLK_I2C0, "clk_i2c0", DIV_I2C, 0x1e6, 0x1e7, 0, 0, 0, 0, 0), 168 D_GATE(CLK_I2C1, "clk_i2c1", DIV_I2C, 0x1e8, 0x1e9, 0, 0, 0, 0, 0), 169 D_GATE(CLK_MII_REF, "clk_mii_ref", CLKOUT_D40, 0x342, 0, 0, 0, 0, 0, 0), 170 D_GATE(CLK_NAND, "clk_nand", DIV_NAND, 0x284, 0x285, 0, 0, 0, 0, 0), 171 D_GATE(CLK_NOUSBP2_PG6, "clk_nousbp2_pg6", DIV_P2_PG, 0x774, 0x775, 0, 0, 0, 0, 0), 172 D_GATE(CLK_P1_PG2, "clk_p1_pg2", DIV_P1_PG, 0x862, 0x863, 0, 0, 0, 0, 0), 173 D_GATE(CLK_P1_PG3, "clk_p1_pg3", DIV_P1_PG, 0x864, 0x865, 0, 0, 0, 0, 0), 174 D_GATE(CLK_P1_PG4, "clk_p1_pg4", DIV_P1_PG, 0x866, 0x867, 0, 0, 0, 0, 0), 175 D_GATE(CLK_P4_PG3, "clk_p4_pg3", DIV_P4_PG, 0x824, 0x825, 0, 0, 0, 0, 0), 176 D_GATE(CLK_P4_PG4, "clk_p4_pg4", DIV_P4_PG, 0x826, 0x827, 0, 0, 0, 0, 0), 177 D_GATE(CLK_P6_PG1, "clk_p6_pg1", DIV_P6_PG, 0x8a0, 0x8a1, 0x8a2, 0, 0xb60, 0, 0), 178 D_GATE(CLK_P6_PG2, "clk_p6_pg2", DIV_P6_PG, 0x8a3, 0x8a4, 0x8a5, 0, 0xb61, 0, 0), 179 D_GATE(CLK_P6_PG3, "clk_p6_pg3", DIV_P6_PG, 0x8a6, 0x8a7, 0x8a8, 0, 0xb62, 0, 0), 180 D_GATE(CLK_P6_PG4, "clk_p6_pg4", DIV_P6_PG, 0x8a9, 0x8aa, 0x8ab, 0, 0xb63, 0, 0), 181 D_MODULE(CLK_PCI_USB, "clk_pci_usb", CLKOUT_D40, 0xe6, 0, 0, 0, 0, 0, 0), 182 D_GATE(CLK_QSPI0, "clk_qspi0", DIV_QSPI0, 0x2a4, 0x2a5, 0, 0, 0, 0, 0), 183 D_GATE(CLK_QSPI1, "clk_qspi1", DIV_QSPI1, 0x484, 0x485, 0, 0, 0, 0, 0), 184 D_GATE(CLK_RGMII_REF, "clk_rgmii_ref", CLKOUT_D8, 0x340, 0, 0, 0, 0, 0, 0), 185 D_GATE(CLK_RMII_REF, "clk_rmii_ref", CLKOUT_D20, 0x341, 0, 0, 0, 0, 0, 0), 186 D_GATE(CLK_SDIO0, "clk_sdio0", DIV_SDIO0, 0x64, 0, 0, 0, 0, 0, 0), 187 D_GATE(CLK_SDIO1, "clk_sdio1", DIV_SDIO1, 0x644, 0, 0, 0, 0, 0, 0), 188 D_GATE(CLK_SERCOS100, "clk_sercos100", CLKOUT_D10, 0x425, 0, 0, 0, 0, 0, 0), 189 D_GATE(CLK_SLCD, "clk_slcd", DIV_P1_PG, 0x860, 0x861, 0, 0, 0, 0, 0), 190 D_GATE(CLK_SPI0, "clk_spi0", DIV_P3_PG, 0x7e0, 0x7e1, 0, 0, 0, 0, 0), 191 D_GATE(CLK_SPI1, "clk_spi1", DIV_P3_PG, 0x7e2, 0x7e3, 0, 0, 0, 0, 0), 192 D_GATE(CLK_SPI2, "clk_spi2", DIV_P3_PG, 0x7e4, 0x7e5, 0, 0, 0, 0, 0), 193 D_GATE(CLK_SPI3, "clk_spi3", DIV_P3_PG, 0x7e6, 0x7e7, 0, 0, 0, 0, 0), 194 D_GATE(CLK_SPI4, "clk_spi4", DIV_P4_PG, 0x820, 0x821, 0, 0, 0, 0, 0), 195 D_GATE(CLK_SPI5, "clk_spi5", DIV_P4_PG, 0x822, 0x823, 0, 0, 0, 0, 0), 196 D_GATE(CLK_SWITCH, "clk_switch", DIV_SWITCH, 0x982, 0x983, 0, 0, 0, 0, 0), 197 D_DIV(DIV_MOTOR, "div_motor", CLKOUT_D5, 84, 2, 8), 198 D_MODULE(HCLK_ECAT125, "hclk_ecat125", CLKOUT_D8, 0x400, 0x401, 0, 0x402, 0, 0x440, 0x441), 199 D_MODULE(HCLK_PINCONFIG, "hclk_pinconfig", CLKOUT_D40, 0x740, 0x741, 0x742, 0, 0xae0, 0, 0), 200 D_MODULE(HCLK_SERCOS, "hclk_sercos", CLKOUT_D10, 0x420, 0x422, 0, 0x421, 0, 0x460, 0x461), 201 D_MODULE(HCLK_SGPIO2, "hclk_sgpio2", DIV_P5_PG, 0x8c3, 0x8c4, 0x8c5, 0, 0xb41, 0, 0), 202 D_MODULE(HCLK_SGPIO3, "hclk_sgpio3", DIV_P5_PG, 0x8c6, 0x8c7, 0x8c8, 0, 0xb42, 0, 0), 203 D_MODULE(HCLK_SGPIO4, "hclk_sgpio4", DIV_P5_PG, 0x8c9, 0x8ca, 0x8cb, 0, 0xb43, 0, 0), 204 D_MODULE(HCLK_TIMER0, "hclk_timer0", CLKOUT_D40, 0x743, 0x744, 0x745, 0, 0xae1, 0, 0), 205 D_MODULE(HCLK_TIMER1, "hclk_timer1", CLKOUT_D40, 0x746, 0x747, 0x748, 0, 0xae2, 0, 0), 206 D_MODULE(HCLK_USBF, "hclk_usbf", CLKOUT_D8, 0xe3, 0, 0, 0xe4, 0, 0x102, 0x103), 207 D_MODULE(HCLK_USBH, "hclk_usbh", CLKOUT_D8, 0xe0, 0xe1, 0, 0xe2, 0, 0x100, 0x101), 208 D_MODULE(HCLK_USBPM, "hclk_usbpm", CLKOUT_D8, 0xe5, 0, 0, 0, 0, 0, 0), 209 D_GATE(CLK_48_PG_F, "clk_48_pg_f", CLK_48, 0x78c, 0x78d, 0, 0x78e, 0, 0xb04, 0xb05), 210 D_GATE(CLK_48_PG4, "clk_48_pg4", CLK_48, 0x789, 0x78a, 0x78b, 0, 0xb03, 0, 0), 211 D_FFC(CLK_DDRPHY_PLLCLK_D4, "clk_ddrphy_pllclk_d4", CLK_DDRPHY_PLLCLK, 4), 212 D_FFC(CLK_ECAT100_D4, "clk_ecat100_d4", CLK_ECAT100, 4), 213 D_FFC(CLK_HSR100_D2, "clk_hsr100_d2", CLK_HSR100, 2), 214 D_FFC(CLK_REF_SYNC_D4, "clk_ref_sync_d4", CLK_REF_SYNC, 4), 215 D_FFC(CLK_REF_SYNC_D8, "clk_ref_sync_d8", CLK_REF_SYNC, 8), 216 D_FFC(CLK_SERCOS100_D2, "clk_sercos100_d2", CLK_SERCOS100, 2), 217 D_DIV(DIV_CA7, "div_ca7", CLK_REF_SYNC, 57, 1, 4, 1, 2, 4), 218 D_MODULE(HCLK_CAN0, "hclk_can0", CLK_48, 0x783, 0x784, 0x785, 0, 0xb01, 0, 0), 219 D_MODULE(HCLK_CAN1, "hclk_can1", CLK_48, 0x786, 0x787, 0x788, 0, 0xb02, 0, 0), 220 D_MODULE(HCLK_DELTASIGMA, "hclk_deltasigma", DIV_MOTOR, 0x1ef, 0x1f0, 0x1f1, 0, 0, 0, 0), 221 D_MODULE(HCLK_PWMPTO, "hclk_pwmpto", DIV_MOTOR, 0x1ec, 0x1ed, 0x1ee, 0, 0, 0, 0), 222 D_MODULE(HCLK_RSV, "hclk_rsv", CLK_48, 0x780, 0x781, 0x782, 0, 0xb00, 0, 0), 223 D_MODULE(HCLK_SGPIO0, "hclk_sgpio0", DIV_MOTOR, 0x1e0, 0x1e1, 0x1e2, 0, 0, 0, 0), 224 D_MODULE(HCLK_SGPIO1, "hclk_sgpio1", DIV_MOTOR, 0x1e3, 0x1e4, 0x1e5, 0, 0, 0, 0), 225 D_DIV(RTOS_MDC, "rtos_mdc", CLK_REF_SYNC, 100, 80, 640, 80, 160, 320, 640), 226 D_GATE(CLK_CM3, "clk_cm3", CLK_REF_SYNC_D4, 0xba0, 0xba1, 0, 0xba2, 0, 0xbc0, 0xbc1), 227 D_GATE(CLK_DDRC, "clk_ddrc", CLK_DDRPHY_PLLCLK_D4, 0x323, 0x324, 0, 0, 0, 0, 0), 228 D_GATE(CLK_ECAT25, "clk_ecat25", CLK_ECAT100_D4, 0x403, 0x404, 0, 0, 0, 0, 0), 229 D_GATE(CLK_HSR50, "clk_hsr50", CLK_HSR100_D2, 0x484, 0x485, 0, 0, 0, 0, 0), 230 D_GATE(CLK_HW_RTOS, "clk_hw_rtos", CLK_REF_SYNC_D4, 0xc60, 0xc61, 0, 0, 0, 0, 0), 231 D_GATE(CLK_SERCOS50, "clk_sercos50", CLK_SERCOS100_D2, 0x424, 0x423, 0, 0, 0, 0, 0), 232 D_MODULE(HCLK_ADC, "hclk_adc", CLK_REF_SYNC_D8, 0x1af, 0x1b0, 0x1b1, 0, 0, 0, 0), 233 D_MODULE(HCLK_CM3, "hclk_cm3", CLK_REF_SYNC_D4, 0xc20, 0xc21, 0xc22, 0, 0, 0, 0), 234 D_MODULE(HCLK_CRYPTO_EIP150, "hclk_crypto_eip150", CLK_REF_SYNC_D4, 0x123, 0x124, 0x125, 0, 0x142, 0, 0), 235 D_MODULE(HCLK_CRYPTO_EIP93, "hclk_crypto_eip93", CLK_REF_SYNC_D4, 0x120, 0x121, 0, 0x122, 0, 0x140, 0x141), 236 D_MODULE(HCLK_DDRC, "hclk_ddrc", CLK_REF_SYNC_D4, 0x320, 0x322, 0, 0x321, 0, 0x3a0, 0x3a1), 237 D_MODULE(HCLK_DMA0, "hclk_dma0", CLK_REF_SYNC_D4, 0x260, 0x261, 0x262, 0x263, 0x2c0, 0x2c1, 0x2c2), 238 D_MODULE(HCLK_DMA1, "hclk_dma1", CLK_REF_SYNC_D4, 0x264, 0x265, 0x266, 0x267, 0x2c3, 0x2c4, 0x2c5), 239 D_MODULE(HCLK_GMAC0, "hclk_gmac0", CLK_REF_SYNC_D4, 0x360, 0x361, 0x362, 0x363, 0x3c0, 0x3c1, 0x3c2), 240 D_MODULE(HCLK_GMAC1, "hclk_gmac1", CLK_REF_SYNC_D4, 0x380, 0x381, 0x382, 0x383, 0x3e0, 0x3e1, 0x3e2), 241 D_MODULE(HCLK_GPIO0, "hclk_gpio0", CLK_REF_SYNC_D4, 0x212, 0x213, 0x214, 0, 0, 0, 0), 242 D_MODULE(HCLK_GPIO1, "hclk_gpio1", CLK_REF_SYNC_D4, 0x215, 0x216, 0x217, 0, 0, 0, 0), 243 D_MODULE(HCLK_GPIO2, "hclk_gpio2", CLK_REF_SYNC_D4, 0x229, 0x22a, 0x22b, 0, 0, 0, 0), 244 D_MODULE(HCLK_HSR, "hclk_hsr", CLK_HSR100_D2, 0x480, 0x482, 0, 0x481, 0, 0x4c0, 0x4c1), 245 D_MODULE(HCLK_I2C0, "hclk_i2c0", CLK_REF_SYNC_D8, 0x1a9, 0x1aa, 0x1ab, 0, 0, 0, 0), 246 D_MODULE(HCLK_I2C1, "hclk_i2c1", CLK_REF_SYNC_D8, 0x1ac, 0x1ad, 0x1ae, 0, 0, 0, 0), 247 D_MODULE(HCLK_LCD, "hclk_lcd", CLK_REF_SYNC_D4, 0x7a0, 0x7a1, 0x7a2, 0, 0xb20, 0, 0), 248 D_MODULE(HCLK_MSEBI_M, "hclk_msebi_m", CLK_REF_SYNC_D4, 0x164, 0x165, 0x166, 0, 0x183, 0, 0), 249 D_MODULE(HCLK_MSEBI_S, "hclk_msebi_s", CLK_REF_SYNC_D4, 0x160, 0x161, 0x162, 0x163, 0x180, 0x181, 0x182), 250 D_MODULE(HCLK_NAND, "hclk_nand", CLK_REF_SYNC_D4, 0x280, 0x281, 0x282, 0x283, 0x2e0, 0x2e1, 0x2e2), 251 D_MODULE(HCLK_PG_I, "hclk_pg_i", CLK_REF_SYNC_D4, 0x7ac, 0x7ad, 0, 0x7ae, 0, 0xb24, 0xb25), 252 D_MODULE(HCLK_PG19, "hclk_pg19", CLK_REF_SYNC_D4, 0x22c, 0x22d, 0x22e, 0, 0, 0, 0), 253 D_MODULE(HCLK_PG20, "hclk_pg20", CLK_REF_SYNC_D4, 0x22f, 0x230, 0x231, 0, 0, 0, 0), 254 D_MODULE(HCLK_PG3, "hclk_pg3", CLK_REF_SYNC_D4, 0x7a6, 0x7a7, 0x7a8, 0, 0xb22, 0, 0), 255 D_MODULE(HCLK_PG4, "hclk_pg4", CLK_REF_SYNC_D4, 0x7a9, 0x7aa, 0x7ab, 0, 0xb23, 0, 0), 256 D_MODULE(HCLK_QSPI0, "hclk_qspi0", CLK_REF_SYNC_D4, 0x2a0, 0x2a1, 0x2a2, 0x2a3, 0x300, 0x301, 0x302), 257 D_MODULE(HCLK_QSPI1, "hclk_qspi1", CLK_REF_SYNC_D4, 0x480, 0x481, 0x482, 0x483, 0x4c0, 0x4c1, 0x4c2), 258 D_MODULE(HCLK_ROM, "hclk_rom", CLK_REF_SYNC_D4, 0xaa0, 0xaa1, 0xaa2, 0, 0xb80, 0, 0), 259 D_MODULE(HCLK_RTC, "hclk_rtc", CLK_REF_SYNC_D8, 0xa00, 0, 0, 0, 0, 0, 0), 260 D_MODULE(HCLK_SDIO0, "hclk_sdio0", CLK_REF_SYNC_D4, 0x60, 0x61, 0x62, 0x63, 0x80, 0x81, 0x82), 261 D_MODULE(HCLK_SDIO1, "hclk_sdio1", CLK_REF_SYNC_D4, 0x640, 0x641, 0x642, 0x643, 0x660, 0x661, 0x662), 262 D_MODULE(HCLK_SEMAP, "hclk_semap", CLK_REF_SYNC_D4, 0x7a3, 0x7a4, 0x7a5, 0, 0xb21, 0, 0), 263 D_MODULE(HCLK_SPI0, "hclk_spi0", CLK_REF_SYNC_D4, 0x200, 0x201, 0x202, 0, 0, 0, 0), 264 D_MODULE(HCLK_SPI1, "hclk_spi1", CLK_REF_SYNC_D4, 0x203, 0x204, 0x205, 0, 0, 0, 0), 265 D_MODULE(HCLK_SPI2, "hclk_spi2", CLK_REF_SYNC_D4, 0x206, 0x207, 0x208, 0, 0, 0, 0), 266 D_MODULE(HCLK_SPI3, "hclk_spi3", CLK_REF_SYNC_D4, 0x209, 0x20a, 0x20b, 0, 0, 0, 0), 267 D_MODULE(HCLK_SPI4, "hclk_spi4", CLK_REF_SYNC_D4, 0x20c, 0x20d, 0x20e, 0, 0, 0, 0), 268 D_MODULE(HCLK_SPI5, "hclk_spi5", CLK_REF_SYNC_D4, 0x20f, 0x210, 0x211, 0, 0, 0, 0), 269 D_MODULE(HCLK_SWITCH, "hclk_switch", CLK_REF_SYNC_D4, 0x980, 0, 0x981, 0, 0, 0, 0), 270 D_MODULE(HCLK_SWITCH_RG, "hclk_switch_rg", CLK_REF_SYNC_D4, 0xc40, 0xc41, 0xc42, 0, 0, 0, 0), 271 D_MODULE(HCLK_UART0, "hclk_uart0", CLK_REF_SYNC_D8, 0x1a0, 0x1a1, 0x1a2, 0, 0, 0, 0), 272 D_MODULE(HCLK_UART1, "hclk_uart1", CLK_REF_SYNC_D8, 0x1a3, 0x1a4, 0x1a5, 0, 0, 0, 0), 273 D_MODULE(HCLK_UART2, "hclk_uart2", CLK_REF_SYNC_D8, 0x1a6, 0x1a7, 0x1a8, 0, 0, 0, 0), 274 D_MODULE(HCLK_UART3, "hclk_uart3", CLK_REF_SYNC_D4, 0x218, 0x219, 0x21a, 0, 0, 0, 0), 275 D_MODULE(HCLK_UART4, "hclk_uart4", CLK_REF_SYNC_D4, 0x21b, 0x21c, 0x21d, 0, 0, 0, 0), 276 D_MODULE(HCLK_UART5, "hclk_uart5", CLK_REF_SYNC_D4, 0x220, 0x221, 0x222, 0, 0, 0, 0), 277 D_MODULE(HCLK_UART6, "hclk_uart6", CLK_REF_SYNC_D4, 0x223, 0x224, 0x225, 0, 0, 0, 0), 278 D_MODULE(HCLK_UART7, "hclk_uart7", CLK_REF_SYNC_D4, 0x226, 0x227, 0x228, 0, 0, 0, 0), 279 /* 280 * These are not hardware clocks, but are needed to handle the special 281 * case where we have a 'selector bit' that doesn't just change the 282 * parent for a clock, but also the gate it's suposed to use. 283 */ 284 { 285 .index = R9A06G032_UART_GROUP_012, 286 .name = "uart_group_012", 287 .type = K_BITSEL, 288 .source = 1 + R9A06G032_DIV_UART, 289 /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */ 290 .dual.sel = ((0xec / 4) << 5) | 24, 291 .dual.group = 0, 292 }, 293 { 294 .index = R9A06G032_UART_GROUP_34567, 295 .name = "uart_group_34567", 296 .type = K_BITSEL, 297 .source = 1 + R9A06G032_DIV_P2_PG, 298 /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */ 299 .dual.sel = ((0x34 / 4) << 5) | 30, 300 .dual.group = 1, 301 }, 302 D_UGATE(CLK_UART0, "clk_uart0", UART_GROUP_012, 0, 0, 0x1b2, 0x1b3, 0x1b4, 0x1b5), 303 D_UGATE(CLK_UART1, "clk_uart1", UART_GROUP_012, 0, 1, 0x1b6, 0x1b7, 0x1b8, 0x1b9), 304 D_UGATE(CLK_UART2, "clk_uart2", UART_GROUP_012, 0, 2, 0x1ba, 0x1bb, 0x1bc, 0x1bd), 305 D_UGATE(CLK_UART3, "clk_uart3", UART_GROUP_34567, 1, 0, 0x760, 0x761, 0x762, 0x763), 306 D_UGATE(CLK_UART4, "clk_uart4", UART_GROUP_34567, 1, 1, 0x764, 0x765, 0x766, 0x767), 307 D_UGATE(CLK_UART5, "clk_uart5", UART_GROUP_34567, 1, 2, 0x768, 0x769, 0x76a, 0x76b), 308 D_UGATE(CLK_UART6, "clk_uart6", UART_GROUP_34567, 1, 3, 0x76c, 0x76d, 0x76e, 0x76f), 309 D_UGATE(CLK_UART7, "clk_uart7", UART_GROUP_34567, 1, 4, 0x770, 0x771, 0x772, 0x773), 310 }; 311 312 struct r9a06g032_priv { 313 struct clk_onecell_data data; 314 spinlock_t lock; /* protects concurent access to gates */ 315 void __iomem *reg; 316 }; 317 318 /* register/bit pairs are encoded as an uint16_t */ 319 static void 320 clk_rdesc_set(struct r9a06g032_priv *clocks, 321 u16 one, unsigned int on) 322 { 323 u32 __iomem *reg = clocks->reg + (4 * (one >> 5)); 324 u32 val = readl(reg); 325 326 val = (val & ~(1U << (one & 0x1f))) | ((!!on) << (one & 0x1f)); 327 writel(val, reg); 328 } 329 330 static int 331 clk_rdesc_get(struct r9a06g032_priv *clocks, 332 uint16_t one) 333 { 334 u32 __iomem *reg = clocks->reg + (4 * (one >> 5)); 335 u32 val = readl(reg); 336 337 return !!(val & (1U << (one & 0x1f))); 338 } 339 340 /* 341 * This implements the R9A06G032 clock gate 'driver'. We cannot use the system's 342 * clock gate framework as the gates on the R9A06G032 have a special enabling 343 * sequence, therefore we use this little proxy. 344 */ 345 struct r9a06g032_clk_gate { 346 struct clk_hw hw; 347 struct r9a06g032_priv *clocks; 348 u16 index; 349 350 struct r9a06g032_gate gate; 351 }; 352 353 #define to_r9a06g032_gate(_hw) container_of(_hw, struct r9a06g032_clk_gate, hw) 354 355 static int create_add_module_clock(struct of_phandle_args *clkspec, 356 struct device *dev) 357 { 358 struct clk *clk; 359 int error; 360 361 clk = of_clk_get_from_provider(clkspec); 362 if (IS_ERR(clk)) 363 return PTR_ERR(clk); 364 365 error = pm_clk_create(dev); 366 if (error) { 367 clk_put(clk); 368 return error; 369 } 370 371 error = pm_clk_add_clk(dev, clk); 372 if (error) { 373 pm_clk_destroy(dev); 374 clk_put(clk); 375 } 376 377 return error; 378 } 379 380 static int r9a06g032_attach_dev(struct generic_pm_domain *pd, 381 struct device *dev) 382 { 383 struct device_node *np = dev->of_node; 384 struct of_phandle_args clkspec; 385 int i = 0; 386 int error; 387 int index; 388 389 while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i, 390 &clkspec)) { 391 if (clkspec.np != pd->dev.of_node) 392 continue; 393 394 index = clkspec.args[0]; 395 if (index < R9A06G032_CLOCK_COUNT && 396 r9a06g032_clocks[index].managed) { 397 error = create_add_module_clock(&clkspec, dev); 398 of_node_put(clkspec.np); 399 if (error) 400 return error; 401 } 402 i++; 403 } 404 405 return 0; 406 } 407 408 static void r9a06g032_detach_dev(struct generic_pm_domain *unused, struct device *dev) 409 { 410 if (!pm_clk_no_clocks(dev)) 411 pm_clk_destroy(dev); 412 } 413 414 static int r9a06g032_add_clk_domain(struct device *dev) 415 { 416 struct device_node *np = dev->of_node; 417 struct generic_pm_domain *pd; 418 419 pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); 420 if (!pd) 421 return -ENOMEM; 422 423 pd->name = np->name; 424 pd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_ALWAYS_ON | 425 GENPD_FLAG_ACTIVE_WAKEUP; 426 pd->attach_dev = r9a06g032_attach_dev; 427 pd->detach_dev = r9a06g032_detach_dev; 428 pm_genpd_init(pd, &pm_domain_always_on_gov, false); 429 430 of_genpd_add_provider_simple(np, pd); 431 return 0; 432 } 433 434 static void 435 r9a06g032_clk_gate_set(struct r9a06g032_priv *clocks, 436 struct r9a06g032_gate *g, int on) 437 { 438 unsigned long flags; 439 440 WARN_ON(!g->gate); 441 442 spin_lock_irqsave(&clocks->lock, flags); 443 clk_rdesc_set(clocks, g->gate, on); 444 /* De-assert reset */ 445 if (g->reset) 446 clk_rdesc_set(clocks, g->reset, 1); 447 spin_unlock_irqrestore(&clocks->lock, flags); 448 449 /* Hardware manual recommends 5us delay after enabling clock & reset */ 450 udelay(5); 451 452 /* If the peripheral is memory mapped (i.e. an AXI slave), there is an 453 * associated SLVRDY bit in the System Controller that needs to be set 454 * so that the FlexWAY bus fabric passes on the read/write requests. 455 */ 456 if (g->ready || g->midle) { 457 spin_lock_irqsave(&clocks->lock, flags); 458 if (g->ready) 459 clk_rdesc_set(clocks, g->ready, on); 460 /* Clear 'Master Idle Request' bit */ 461 if (g->midle) 462 clk_rdesc_set(clocks, g->midle, !on); 463 spin_unlock_irqrestore(&clocks->lock, flags); 464 } 465 /* Note: We don't wait for FlexWAY Socket Connection signal */ 466 } 467 468 static int r9a06g032_clk_gate_enable(struct clk_hw *hw) 469 { 470 struct r9a06g032_clk_gate *g = to_r9a06g032_gate(hw); 471 472 r9a06g032_clk_gate_set(g->clocks, &g->gate, 1); 473 return 0; 474 } 475 476 static void r9a06g032_clk_gate_disable(struct clk_hw *hw) 477 { 478 struct r9a06g032_clk_gate *g = to_r9a06g032_gate(hw); 479 480 r9a06g032_clk_gate_set(g->clocks, &g->gate, 0); 481 } 482 483 static int r9a06g032_clk_gate_is_enabled(struct clk_hw *hw) 484 { 485 struct r9a06g032_clk_gate *g = to_r9a06g032_gate(hw); 486 487 /* if clock is in reset, the gate might be on, and still not 'be' on */ 488 if (g->gate.reset && !clk_rdesc_get(g->clocks, g->gate.reset)) 489 return 0; 490 491 return clk_rdesc_get(g->clocks, g->gate.gate); 492 } 493 494 static const struct clk_ops r9a06g032_clk_gate_ops = { 495 .enable = r9a06g032_clk_gate_enable, 496 .disable = r9a06g032_clk_gate_disable, 497 .is_enabled = r9a06g032_clk_gate_is_enabled, 498 }; 499 500 static struct clk * 501 r9a06g032_register_gate(struct r9a06g032_priv *clocks, 502 const char *parent_name, 503 const struct r9a06g032_clkdesc *desc) 504 { 505 struct clk *clk; 506 struct r9a06g032_clk_gate *g; 507 struct clk_init_data init; 508 509 g = kzalloc(sizeof(*g), GFP_KERNEL); 510 if (!g) 511 return NULL; 512 513 init.name = desc->name; 514 init.ops = &r9a06g032_clk_gate_ops; 515 init.flags = CLK_SET_RATE_PARENT; 516 init.parent_names = parent_name ? &parent_name : NULL; 517 init.num_parents = parent_name ? 1 : 0; 518 519 g->clocks = clocks; 520 g->index = desc->index; 521 g->gate = desc->gate; 522 g->hw.init = &init; 523 524 /* 525 * important here, some clocks are already in use by the CM3, we 526 * have to assume they are not Linux's to play with and try to disable 527 * at the end of the boot! 528 */ 529 if (r9a06g032_clk_gate_is_enabled(&g->hw)) { 530 init.flags |= CLK_IS_CRITICAL; 531 pr_debug("%s was enabled, making read-only\n", desc->name); 532 } 533 534 clk = clk_register(NULL, &g->hw); 535 if (IS_ERR(clk)) { 536 kfree(g); 537 return NULL; 538 } 539 return clk; 540 } 541 542 struct r9a06g032_clk_div { 543 struct clk_hw hw; 544 struct r9a06g032_priv *clocks; 545 u16 index; 546 u16 reg; 547 u16 min, max; 548 u8 table_size; 549 u16 table[8]; /* we know there are no more than 8 */ 550 }; 551 552 #define to_r9a06g032_div(_hw) \ 553 container_of(_hw, struct r9a06g032_clk_div, hw) 554 555 static unsigned long 556 r9a06g032_div_recalc_rate(struct clk_hw *hw, 557 unsigned long parent_rate) 558 { 559 struct r9a06g032_clk_div *clk = to_r9a06g032_div(hw); 560 u32 __iomem *reg = clk->clocks->reg + (4 * clk->reg); 561 u32 div = readl(reg); 562 563 if (div < clk->min) 564 div = clk->min; 565 else if (div > clk->max) 566 div = clk->max; 567 return DIV_ROUND_UP(parent_rate, div); 568 } 569 570 /* 571 * Attempts to find a value that is in range of min,max, 572 * and if a table of set dividers was specified for this 573 * register, try to find the fixed divider that is the closest 574 * to the target frequency 575 */ 576 static long 577 r9a06g032_div_clamp_div(struct r9a06g032_clk_div *clk, 578 unsigned long rate, unsigned long prate) 579 { 580 /* + 1 to cope with rates that have the remainder dropped */ 581 u32 div = DIV_ROUND_UP(prate, rate + 1); 582 int i; 583 584 if (div <= clk->min) 585 return clk->min; 586 if (div >= clk->max) 587 return clk->max; 588 589 for (i = 0; clk->table_size && i < clk->table_size - 1; i++) { 590 if (div >= clk->table[i] && div <= clk->table[i + 1]) { 591 unsigned long m = rate - 592 DIV_ROUND_UP(prate, clk->table[i]); 593 unsigned long p = 594 DIV_ROUND_UP(prate, clk->table[i + 1]) - 595 rate; 596 /* 597 * select the divider that generates 598 * the value closest to the ideal frequency 599 */ 600 div = p >= m ? clk->table[i] : clk->table[i + 1]; 601 return div; 602 } 603 } 604 return div; 605 } 606 607 static long 608 r9a06g032_div_round_rate(struct clk_hw *hw, 609 unsigned long rate, unsigned long *prate) 610 { 611 struct r9a06g032_clk_div *clk = to_r9a06g032_div(hw); 612 u32 div = DIV_ROUND_UP(*prate, rate); 613 614 pr_devel("%s %pC %ld (prate %ld) (wanted div %u)\n", __func__, 615 hw->clk, rate, *prate, div); 616 pr_devel(" min %d (%ld) max %d (%ld)\n", 617 clk->min, DIV_ROUND_UP(*prate, clk->min), 618 clk->max, DIV_ROUND_UP(*prate, clk->max)); 619 620 div = r9a06g032_div_clamp_div(clk, rate, *prate); 621 /* 622 * this is a hack. Currently the serial driver asks for a clock rate 623 * that is 16 times the baud rate -- and that is wildly outside the 624 * range of the UART divider, somehow there is no provision for that 625 * case of 'let the divider as is if outside range'. 626 * The serial driver *shouldn't* play with these clocks anyway, there's 627 * several uarts attached to this divider, and changing this impacts 628 * everyone. 629 */ 630 if (clk->index == R9A06G032_DIV_UART || 631 clk->index == R9A06G032_DIV_P2_PG) { 632 pr_devel("%s div uart hack!\n", __func__); 633 return clk_get_rate(hw->clk); 634 } 635 pr_devel("%s %pC %ld / %u = %ld\n", __func__, hw->clk, 636 *prate, div, DIV_ROUND_UP(*prate, div)); 637 return DIV_ROUND_UP(*prate, div); 638 } 639 640 static int 641 r9a06g032_div_set_rate(struct clk_hw *hw, 642 unsigned long rate, unsigned long parent_rate) 643 { 644 struct r9a06g032_clk_div *clk = to_r9a06g032_div(hw); 645 /* + 1 to cope with rates that have the remainder dropped */ 646 u32 div = DIV_ROUND_UP(parent_rate, rate + 1); 647 u32 __iomem *reg = clk->clocks->reg + (4 * clk->reg); 648 649 pr_devel("%s %pC rate %ld parent %ld div %d\n", __func__, hw->clk, 650 rate, parent_rate, div); 651 652 /* 653 * Need to write the bit 31 with the divider value to 654 * latch it. Technically we should wait until it has been 655 * cleared too. 656 * TODO: Find whether this callback is sleepable, in case 657 * the hardware /does/ require some sort of spinloop here. 658 */ 659 writel(div | BIT(31), reg); 660 661 return 0; 662 } 663 664 static const struct clk_ops r9a06g032_clk_div_ops = { 665 .recalc_rate = r9a06g032_div_recalc_rate, 666 .round_rate = r9a06g032_div_round_rate, 667 .set_rate = r9a06g032_div_set_rate, 668 }; 669 670 static struct clk * 671 r9a06g032_register_div(struct r9a06g032_priv *clocks, 672 const char *parent_name, 673 const struct r9a06g032_clkdesc *desc) 674 { 675 struct r9a06g032_clk_div *div; 676 struct clk *clk; 677 struct clk_init_data init; 678 unsigned int i; 679 680 div = kzalloc(sizeof(*div), GFP_KERNEL); 681 if (!div) 682 return NULL; 683 684 init.name = desc->name; 685 init.ops = &r9a06g032_clk_div_ops; 686 init.flags = CLK_SET_RATE_PARENT; 687 init.parent_names = parent_name ? &parent_name : NULL; 688 init.num_parents = parent_name ? 1 : 0; 689 690 div->clocks = clocks; 691 div->index = desc->index; 692 div->reg = desc->reg; 693 div->hw.init = &init; 694 div->min = desc->div_min; 695 div->max = desc->div_max; 696 /* populate (optional) divider table fixed values */ 697 for (i = 0; i < ARRAY_SIZE(div->table) && 698 i < ARRAY_SIZE(desc->div_table) && desc->div_table[i]; i++) { 699 div->table[div->table_size++] = desc->div_table[i]; 700 } 701 702 clk = clk_register(NULL, &div->hw); 703 if (IS_ERR(clk)) { 704 kfree(div); 705 return NULL; 706 } 707 return clk; 708 } 709 710 /* 711 * This clock provider handles the case of the R9A06G032 where you have 712 * peripherals that have two potential clock source and two gates, one for 713 * each of the clock source - the used clock source (for all sub clocks) 714 * is selected by a single bit. 715 * That single bit affects all sub-clocks, and therefore needs to change the 716 * active gate (and turn the others off) and force a recalculation of the rates. 717 * 718 * This implements two clock providers, one 'bitselect' that 719 * handles the switch between both parents, and another 'dualgate' 720 * that knows which gate to poke at, depending on the parent's bit position. 721 */ 722 struct r9a06g032_clk_bitsel { 723 struct clk_hw hw; 724 struct r9a06g032_priv *clocks; 725 u16 index; 726 u16 selector; /* selector register + bit */ 727 }; 728 729 #define to_clk_bitselect(_hw) \ 730 container_of(_hw, struct r9a06g032_clk_bitsel, hw) 731 732 static u8 r9a06g032_clk_mux_get_parent(struct clk_hw *hw) 733 { 734 struct r9a06g032_clk_bitsel *set = to_clk_bitselect(hw); 735 736 return clk_rdesc_get(set->clocks, set->selector); 737 } 738 739 static int r9a06g032_clk_mux_set_parent(struct clk_hw *hw, u8 index) 740 { 741 struct r9a06g032_clk_bitsel *set = to_clk_bitselect(hw); 742 743 /* a single bit in the register selects one of two parent clocks */ 744 clk_rdesc_set(set->clocks, set->selector, !!index); 745 746 return 0; 747 } 748 749 static const struct clk_ops clk_bitselect_ops = { 750 .get_parent = r9a06g032_clk_mux_get_parent, 751 .set_parent = r9a06g032_clk_mux_set_parent, 752 }; 753 754 static struct clk * 755 r9a06g032_register_bitsel(struct r9a06g032_priv *clocks, 756 const char *parent_name, 757 const struct r9a06g032_clkdesc *desc) 758 { 759 struct clk *clk; 760 struct r9a06g032_clk_bitsel *g; 761 struct clk_init_data init; 762 const char *names[2]; 763 764 /* allocate the gate */ 765 g = kzalloc(sizeof(*g), GFP_KERNEL); 766 if (!g) 767 return NULL; 768 769 names[0] = parent_name; 770 names[1] = "clk_pll_usb"; 771 772 init.name = desc->name; 773 init.ops = &clk_bitselect_ops; 774 init.flags = CLK_SET_RATE_PARENT; 775 init.parent_names = names; 776 init.num_parents = 2; 777 778 g->clocks = clocks; 779 g->index = desc->index; 780 g->selector = desc->dual.sel; 781 g->hw.init = &init; 782 783 clk = clk_register(NULL, &g->hw); 784 if (IS_ERR(clk)) { 785 kfree(g); 786 return NULL; 787 } 788 return clk; 789 } 790 791 struct r9a06g032_clk_dualgate { 792 struct clk_hw hw; 793 struct r9a06g032_priv *clocks; 794 u16 index; 795 u16 selector; /* selector register + bit */ 796 struct r9a06g032_gate gate[2]; 797 }; 798 799 #define to_clk_dualgate(_hw) \ 800 container_of(_hw, struct r9a06g032_clk_dualgate, hw) 801 802 static int 803 r9a06g032_clk_dualgate_setenable(struct r9a06g032_clk_dualgate *g, int enable) 804 { 805 u8 sel_bit = clk_rdesc_get(g->clocks, g->selector); 806 807 /* we always turn off the 'other' gate, regardless */ 808 r9a06g032_clk_gate_set(g->clocks, &g->gate[!sel_bit], 0); 809 r9a06g032_clk_gate_set(g->clocks, &g->gate[sel_bit], enable); 810 811 return 0; 812 } 813 814 static int r9a06g032_clk_dualgate_enable(struct clk_hw *hw) 815 { 816 struct r9a06g032_clk_dualgate *gate = to_clk_dualgate(hw); 817 818 r9a06g032_clk_dualgate_setenable(gate, 1); 819 820 return 0; 821 } 822 823 static void r9a06g032_clk_dualgate_disable(struct clk_hw *hw) 824 { 825 struct r9a06g032_clk_dualgate *gate = to_clk_dualgate(hw); 826 827 r9a06g032_clk_dualgate_setenable(gate, 0); 828 } 829 830 static int r9a06g032_clk_dualgate_is_enabled(struct clk_hw *hw) 831 { 832 struct r9a06g032_clk_dualgate *g = to_clk_dualgate(hw); 833 u8 sel_bit = clk_rdesc_get(g->clocks, g->selector); 834 835 return clk_rdesc_get(g->clocks, g->gate[sel_bit].gate); 836 } 837 838 static const struct clk_ops r9a06g032_clk_dualgate_ops = { 839 .enable = r9a06g032_clk_dualgate_enable, 840 .disable = r9a06g032_clk_dualgate_disable, 841 .is_enabled = r9a06g032_clk_dualgate_is_enabled, 842 }; 843 844 static struct clk * 845 r9a06g032_register_dualgate(struct r9a06g032_priv *clocks, 846 const char *parent_name, 847 const struct r9a06g032_clkdesc *desc, 848 uint16_t sel) 849 { 850 struct r9a06g032_clk_dualgate *g; 851 struct clk *clk; 852 struct clk_init_data init; 853 854 /* allocate the gate */ 855 g = kzalloc(sizeof(*g), GFP_KERNEL); 856 if (!g) 857 return NULL; 858 g->clocks = clocks; 859 g->index = desc->index; 860 g->selector = sel; 861 g->gate[0].gate = desc->dual.g1; 862 g->gate[0].reset = desc->dual.r1; 863 g->gate[1].gate = desc->dual.g2; 864 g->gate[1].reset = desc->dual.r2; 865 866 init.name = desc->name; 867 init.ops = &r9a06g032_clk_dualgate_ops; 868 init.flags = CLK_SET_RATE_PARENT; 869 init.parent_names = &parent_name; 870 init.num_parents = 1; 871 g->hw.init = &init; 872 /* 873 * important here, some clocks are already in use by the CM3, we 874 * have to assume they are not Linux's to play with and try to disable 875 * at the end of the boot! 876 */ 877 if (r9a06g032_clk_dualgate_is_enabled(&g->hw)) { 878 init.flags |= CLK_IS_CRITICAL; 879 pr_debug("%s was enabled, making read-only\n", desc->name); 880 } 881 882 clk = clk_register(NULL, &g->hw); 883 if (IS_ERR(clk)) { 884 kfree(g); 885 return NULL; 886 } 887 return clk; 888 } 889 890 static void r9a06g032_clocks_del_clk_provider(void *data) 891 { 892 of_clk_del_provider(data); 893 } 894 895 static int __init r9a06g032_clocks_probe(struct platform_device *pdev) 896 { 897 struct device *dev = &pdev->dev; 898 struct device_node *np = dev->of_node; 899 struct r9a06g032_priv *clocks; 900 struct clk **clks; 901 struct clk *mclk; 902 unsigned int i; 903 u16 uart_group_sel[2]; 904 int error; 905 906 clocks = devm_kzalloc(dev, sizeof(*clocks), GFP_KERNEL); 907 clks = devm_kcalloc(dev, R9A06G032_CLOCK_COUNT, sizeof(struct clk *), 908 GFP_KERNEL); 909 if (!clocks || !clks) 910 return -ENOMEM; 911 912 spin_lock_init(&clocks->lock); 913 914 clocks->data.clks = clks; 915 clocks->data.clk_num = R9A06G032_CLOCK_COUNT; 916 917 mclk = devm_clk_get(dev, "mclk"); 918 if (IS_ERR(mclk)) 919 return PTR_ERR(mclk); 920 921 clocks->reg = of_iomap(np, 0); 922 if (WARN_ON(!clocks->reg)) 923 return -ENOMEM; 924 for (i = 0; i < ARRAY_SIZE(r9a06g032_clocks); ++i) { 925 const struct r9a06g032_clkdesc *d = &r9a06g032_clocks[i]; 926 const char *parent_name = d->source ? 927 __clk_get_name(clocks->data.clks[d->source - 1]) : 928 __clk_get_name(mclk); 929 struct clk *clk = NULL; 930 931 switch (d->type) { 932 case K_FFC: 933 clk = clk_register_fixed_factor(NULL, d->name, 934 parent_name, 0, 935 d->mul, d->div); 936 break; 937 case K_GATE: 938 clk = r9a06g032_register_gate(clocks, parent_name, d); 939 break; 940 case K_DIV: 941 clk = r9a06g032_register_div(clocks, parent_name, d); 942 break; 943 case K_BITSEL: 944 /* keep that selector register around */ 945 uart_group_sel[d->dual.group] = d->dual.sel; 946 clk = r9a06g032_register_bitsel(clocks, parent_name, d); 947 break; 948 case K_DUALGATE: 949 clk = r9a06g032_register_dualgate(clocks, parent_name, 950 d, 951 uart_group_sel[d->dual.group]); 952 break; 953 } 954 clocks->data.clks[d->index] = clk; 955 } 956 error = of_clk_add_provider(np, of_clk_src_onecell_get, &clocks->data); 957 if (error) 958 return error; 959 960 error = devm_add_action_or_reset(dev, 961 r9a06g032_clocks_del_clk_provider, np); 962 if (error) 963 return error; 964 965 return r9a06g032_add_clk_domain(dev); 966 } 967 968 static const struct of_device_id r9a06g032_match[] = { 969 { .compatible = "renesas,r9a06g032-sysctrl" }, 970 { } 971 }; 972 973 static struct platform_driver r9a06g032_clock_driver = { 974 .driver = { 975 .name = "renesas,r9a06g032-sysctrl", 976 .of_match_table = r9a06g032_match, 977 }, 978 }; 979 980 static int __init r9a06g032_clocks_init(void) 981 { 982 return platform_driver_probe(&r9a06g032_clock_driver, 983 r9a06g032_clocks_probe); 984 } 985 986 subsys_initcall(r9a06g032_clocks_init); 987