xref: /openbmc/linux/drivers/clk/pxa/clk-pxa25x.c (revision 2cc39179)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Marvell PXA25x family clocks
4  *
5  * Copyright (C) 2014 Robert Jarzmik
6  *
7  * Heavily inspired from former arch/arm/mach-pxa/pxa25x.c.
8  *
9  * For non-devicetree platforms. Once pxa is fully converted to devicetree, this
10  * should go away.
11  */
12 #include <linux/clk-provider.h>
13 #include <linux/clk.h>
14 #include <linux/clkdev.h>
15 #include <linux/io.h>
16 #include <linux/of.h>
17 #include <linux/soc/pxa/smemc.h>
18 
19 #include <dt-bindings/clock/pxa-clock.h>
20 #include "clk-pxa.h"
21 #include "clk-pxa2xx.h"
22 
23 #define KHz 1000
24 #define MHz (1000 * 1000)
25 
26 enum {
27 	PXA_CORE_RUN = 0,
28 	PXA_CORE_TURBO,
29 };
30 
31 #define PXA25x_CLKCFG(T)			\
32 	(CLKCFG_FCS |				\
33 	 ((T) ? CLKCFG_TURBO : 0))
34 #define PXA25x_CCCR(N2, M, L) (N2 << 7 | M << 5 | L)
35 
36 /* Define the refresh period in mSec for the SDRAM and the number of rows */
37 #define SDRAM_TREF	64	/* standard 64ms SDRAM */
38 
39 /*
40  * Various clock factors driven by the CCCR register.
41  */
42 static void __iomem *clk_regs;
43 
44 /* Crystal Frequency to Memory Frequency Multiplier (L) */
45 static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
46 
47 /* Memory Frequency to Run Mode Frequency Multiplier (M) */
48 static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 };
49 
50 /* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */
51 /* Note: we store the value N * 2 here. */
52 static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 };
53 
54 static const char * const get_freq_khz[] = {
55 	"core", "run", "cpll", "memory"
56 };
57 
58 static u32 mdrefr_dri(unsigned int freq_khz)
59 {
60 	u32 interval = freq_khz * SDRAM_TREF / pxa2xx_smemc_get_sdram_rows();
61 
62 	return interval / 32;
63 }
64 
65 /*
66  * Get the clock frequency as reflected by CCCR and the turbo flag.
67  * We assume these values have been applied via a fcs.
68  * If info is not 0 we also display the current settings.
69  */
70 unsigned int pxa25x_get_clk_frequency_khz(int info)
71 {
72 	struct clk *clk;
73 	unsigned long clks[5];
74 	int i;
75 
76 	for (i = 0; i < ARRAY_SIZE(get_freq_khz); i++) {
77 		clk = clk_get(NULL, get_freq_khz[i]);
78 		if (IS_ERR(clk)) {
79 			clks[i] = 0;
80 		} else {
81 			clks[i] = clk_get_rate(clk);
82 			clk_put(clk);
83 		}
84 	}
85 
86 	if (info) {
87 		pr_info("Run Mode clock: %ld.%02ldMHz\n",
88 			clks[1] / 1000000, (clks[1] % 1000000) / 10000);
89 		pr_info("Turbo Mode clock: %ld.%02ldMHz\n",
90 			clks[2] / 1000000, (clks[2] % 1000000) / 10000);
91 		pr_info("Memory clock: %ld.%02ldMHz\n",
92 			clks[3] / 1000000, (clks[3] % 1000000) / 10000);
93 	}
94 
95 	return (unsigned int)clks[0] / KHz;
96 }
97 
98 static unsigned long clk_pxa25x_memory_get_rate(struct clk_hw *hw,
99 						unsigned long parent_rate)
100 {
101 	unsigned long cccr = readl(clk_regs + CCCR);
102 	unsigned int m = M_clk_mult[(cccr >> 5) & 0x03];
103 
104 	return parent_rate / m;
105 }
106 PARENTS(clk_pxa25x_memory) = { "run" };
107 RATE_RO_OPS(clk_pxa25x_memory, "memory");
108 
109 PARENTS(pxa25x_pbus95) = { "ppll_95_85mhz", "ppll_95_85mhz" };
110 PARENTS(pxa25x_pbus147) = { "ppll_147_46mhz", "ppll_147_46mhz" };
111 PARENTS(pxa25x_osc3) = { "osc_3_6864mhz", "osc_3_6864mhz" };
112 
113 #define PXA25X_CKEN(dev_id, con_id, parents, mult, div,			\
114 		    bit, is_lp, flags)					\
115 	PXA_CKEN(dev_id, con_id, bit, parents, mult, div, mult, div,	\
116 		 is_lp,  CKEN, CKEN_ ## bit, flags)
117 #define PXA25X_PBUS95_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)	\
118 	PXA25X_CKEN(dev_id, con_id, pxa25x_pbus95_parents, mult_hp,	\
119 		    div_hp, bit, NULL, 0)
120 #define PXA25X_PBUS147_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)\
121 	PXA25X_CKEN(dev_id, con_id, pxa25x_pbus147_parents, mult_hp,	\
122 		    div_hp, bit, NULL, 0)
123 #define PXA25X_OSC3_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)	\
124 	PXA25X_CKEN(dev_id, con_id, pxa25x_osc3_parents, mult_hp,	\
125 		    div_hp, bit, NULL, 0)
126 
127 #define PXA25X_CKEN_1RATE(dev_id, con_id, bit, parents, delay)		\
128 	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
129 		       CKEN, CKEN_ ## bit, 0)
130 #define PXA25X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay)	\
131 	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
132 		       CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED)
133 
134 static struct desc_clk_cken pxa25x_clocks[] __initdata = {
135 	PXA25X_PBUS95_CKEN("pxa2xx-mci.0", NULL, MMC, 1, 5, 0),
136 	PXA25X_PBUS95_CKEN("pxa2xx-i2c.0", NULL, I2C, 1, 3, 0),
137 	PXA25X_PBUS95_CKEN("pxa2xx-ir", "FICPCLK", FICP, 1, 2, 0),
138 	PXA25X_PBUS95_CKEN("pxa25x-udc", NULL, USB, 1, 2, 5),
139 	PXA25X_PBUS147_CKEN("pxa2xx-uart.0", NULL, FFUART, 1, 10, 1),
140 	PXA25X_PBUS147_CKEN("pxa2xx-uart.1", NULL, BTUART, 1, 10, 1),
141 	PXA25X_PBUS147_CKEN("pxa2xx-uart.2", NULL, STUART, 1, 10, 1),
142 	PXA25X_PBUS147_CKEN("pxa2xx-uart.3", NULL, HWUART, 1, 10, 1),
143 	PXA25X_PBUS147_CKEN("pxa2xx-i2s", NULL, I2S, 1, 10, 0),
144 	PXA25X_PBUS147_CKEN(NULL, "AC97CLK", AC97, 1, 12, 0),
145 	PXA25X_OSC3_CKEN("pxa25x-ssp.0", NULL, SSP, 1, 1, 0),
146 	PXA25X_OSC3_CKEN("pxa25x-nssp.1", NULL, NSSP, 1, 1, 0),
147 	PXA25X_OSC3_CKEN("pxa25x-nssp.2", NULL, ASSP, 1, 1, 0),
148 	PXA25X_OSC3_CKEN("pxa25x-pwm.0", NULL, PWM0, 1, 1, 0),
149 	PXA25X_OSC3_CKEN("pxa25x-pwm.1", NULL, PWM1, 1, 1, 0),
150 
151 	PXA25X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, clk_pxa25x_memory_parents, 0),
152 	PXA25X_CKEN_1RATE_AO("pxa2xx-pcmcia", NULL, MEMC,
153 			     clk_pxa25x_memory_parents, 0),
154 };
155 
156 /*
157  * In this table, PXA25x_CCCR(N2, M, L) has the following meaning, where :
158  *   - freq_cpll = n * m * L * 3.6864 MHz
159  *   - n = N2 / 2
160  *   - m = 2^(M - 1), where 1 <= M <= 3
161  *   - l = L_clk_mult[L], ie. { 0, 27, 32, 36, 40, 45, 0, }[L]
162  */
163 static struct pxa2xx_freq pxa25x_freqs[] = {
164 	/* CPU  MEMBUS  CCCR                  DIV2 CCLKCFG      */
165 	{ 99532800, 99500, PXA25x_CCCR(2,  1, 1),  1, PXA25x_CLKCFG(1)},
166 	{199065600, 99500, PXA25x_CCCR(4,  1, 1),  0, PXA25x_CLKCFG(1)},
167 	{298598400, 99500, PXA25x_CCCR(3,  2, 1),  0, PXA25x_CLKCFG(1)},
168 	{398131200, 99500, PXA25x_CCCR(4,  2, 1),  0, PXA25x_CLKCFG(1)},
169 };
170 
171 static u8 clk_pxa25x_core_get_parent(struct clk_hw *hw)
172 {
173 	unsigned long clkcfg;
174 	unsigned int t;
175 
176 	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
177 	t  = clkcfg & (1 << 0);
178 	if (t)
179 		return PXA_CORE_TURBO;
180 	return PXA_CORE_RUN;
181 }
182 
183 static int clk_pxa25x_core_set_parent(struct clk_hw *hw, u8 index)
184 {
185 	if (index > PXA_CORE_TURBO)
186 		return -EINVAL;
187 
188 	pxa2xx_core_turbo_switch(index == PXA_CORE_TURBO);
189 
190 	return 0;
191 }
192 
193 static int clk_pxa25x_core_determine_rate(struct clk_hw *hw,
194 					  struct clk_rate_request *req)
195 {
196 	return __clk_mux_determine_rate(hw, req);
197 }
198 
199 PARENTS(clk_pxa25x_core) = { "run", "cpll" };
200 MUX_OPS(clk_pxa25x_core, "core", CLK_SET_RATE_PARENT);
201 
202 static unsigned long clk_pxa25x_run_get_rate(struct clk_hw *hw,
203 					     unsigned long parent_rate)
204 {
205 	unsigned long cccr = readl(clk_regs + CCCR);
206 	unsigned int n2 = N2_clk_mult[(cccr >> 7) & 0x07];
207 
208 	return (parent_rate / n2) * 2;
209 }
210 PARENTS(clk_pxa25x_run) = { "cpll" };
211 RATE_RO_OPS(clk_pxa25x_run, "run");
212 
213 static unsigned long clk_pxa25x_cpll_get_rate(struct clk_hw *hw,
214 	unsigned long parent_rate)
215 {
216 	unsigned long clkcfg, cccr = readl(clk_regs + CCCR);
217 	unsigned int l, m, n2, t;
218 
219 	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
220 	t = clkcfg & (1 << 0);
221 	l  =  L_clk_mult[(cccr >> 0) & 0x1f];
222 	m = M_clk_mult[(cccr >> 5) & 0x03];
223 	n2 = N2_clk_mult[(cccr >> 7) & 0x07];
224 
225 	return m * l * n2 * parent_rate / 2;
226 }
227 
228 static int clk_pxa25x_cpll_determine_rate(struct clk_hw *hw,
229 					  struct clk_rate_request *req)
230 {
231 	return pxa2xx_determine_rate(req, pxa25x_freqs,
232 				     ARRAY_SIZE(pxa25x_freqs));
233 }
234 
235 static int clk_pxa25x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
236 				    unsigned long parent_rate)
237 {
238 	int i;
239 
240 	pr_debug("%s(rate=%lu parent_rate=%lu)\n", __func__, rate, parent_rate);
241 	for (i = 0; i < ARRAY_SIZE(pxa25x_freqs); i++)
242 		if (pxa25x_freqs[i].cpll == rate)
243 			break;
244 
245 	if (i >= ARRAY_SIZE(pxa25x_freqs))
246 		return -EINVAL;
247 
248 	pxa2xx_cpll_change(&pxa25x_freqs[i], mdrefr_dri, clk_regs + CCCR);
249 
250 	return 0;
251 }
252 PARENTS(clk_pxa25x_cpll) = { "osc_3_6864mhz" };
253 RATE_OPS(clk_pxa25x_cpll, "cpll");
254 
255 static void __init pxa25x_register_core(void)
256 {
257 	clkdev_pxa_register(CLK_NONE, "cpll", NULL,
258 			    clk_register_clk_pxa25x_cpll());
259 	clkdev_pxa_register(CLK_NONE, "run", NULL,
260 			    clk_register_clk_pxa25x_run());
261 	clkdev_pxa_register(CLK_CORE, "core", NULL,
262 			    clk_register_clk_pxa25x_core());
263 }
264 
265 static void __init pxa25x_register_plls(void)
266 {
267 	clk_register_fixed_rate(NULL, "osc_3_6864mhz", NULL,
268 				CLK_GET_RATE_NOCACHE, 3686400);
269 	clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL,
270 			    clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
271 						    CLK_GET_RATE_NOCACHE,
272 						    32768));
273 	clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0);
274 	clk_register_fixed_factor(NULL, "ppll_95_85mhz", "osc_3_6864mhz",
275 				  0, 26, 1);
276 	clk_register_fixed_factor(NULL, "ppll_147_46mhz", "osc_3_6864mhz",
277 				  0, 40, 1);
278 }
279 
280 static void __init pxa25x_base_clocks_init(void)
281 {
282 	pxa25x_register_plls();
283 	pxa25x_register_core();
284 	clkdev_pxa_register(CLK_NONE, "system_bus", NULL,
285 			    clk_register_clk_pxa25x_memory());
286 }
287 
288 #define DUMMY_CLK(_con_id, _dev_id, _parent) \
289 	{ .con_id = _con_id, .dev_id = _dev_id, .parent = _parent }
290 struct dummy_clk {
291 	const char *con_id;
292 	const char *dev_id;
293 	const char *parent;
294 };
295 static struct dummy_clk dummy_clks[] __initdata = {
296 	DUMMY_CLK(NULL, "pxa25x-gpio", "osc_32_768khz"),
297 	DUMMY_CLK(NULL, "pxa26x-gpio", "osc_32_768khz"),
298 	DUMMY_CLK("GPIO11_CLK", NULL, "osc_3_6864mhz"),
299 	DUMMY_CLK("GPIO12_CLK", NULL, "osc_32_768khz"),
300 	DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
301 	DUMMY_CLK("OSTIMER0", NULL, "osc_3_6864mhz"),
302 	DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
303 };
304 
305 static void __init pxa25x_dummy_clocks_init(void)
306 {
307 	struct clk *clk;
308 	struct dummy_clk *d;
309 	const char *name;
310 	int i;
311 
312 	/*
313 	 * All pinctrl logic has been wiped out of the clock driver, especially
314 	 * for gpio11 and gpio12 outputs. Machine code should ensure proper pin
315 	 * control (ie. pxa2xx_mfp_config() invocation).
316 	 */
317 	for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) {
318 		d = &dummy_clks[i];
319 		name = d->dev_id ? d->dev_id : d->con_id;
320 		clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1);
321 		clk_register_clkdev(clk, d->con_id, d->dev_id);
322 	}
323 }
324 
325 int __init pxa25x_clocks_init(void __iomem *regs)
326 {
327 	clk_regs = regs;
328 	pxa25x_base_clocks_init();
329 	pxa25x_dummy_clocks_init();
330 	return clk_pxa_cken_init(pxa25x_clocks, ARRAY_SIZE(pxa25x_clocks), clk_regs);
331 }
332 
333 static void __init pxa25x_dt_clocks_init(struct device_node *np)
334 {
335 	pxa25x_clocks_init(ioremap(0x41300000ul, 0x10));
336 	clk_pxa_dt_common_init(np);
337 }
338 CLK_OF_DECLARE(pxa25x_clks, "marvell,pxa250-core-clocks",
339 	       pxa25x_dt_clocks_init);
340