xref: /openbmc/linux/drivers/clk/meson/gxbb-aoclk.c (revision a44e4f3a)
1 // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
2 /*
3  * Copyright (c) 2016 BayLibre, SAS.
4  * Author: Neil Armstrong <narmstrong@baylibre.com>
5  */
6 #include <linux/platform_device.h>
7 #include <linux/mfd/syscon.h>
8 #include "meson-aoclk.h"
9 #include "gxbb-aoclk.h"
10 
11 #include "clk-regmap.h"
12 #include "clk-dualdiv.h"
13 
14 /* AO Configuration Clock registers offsets */
15 #define AO_RTI_PWR_CNTL_REG1	0x0c
16 #define AO_RTI_PWR_CNTL_REG0	0x10
17 #define AO_RTI_GEN_CNTL_REG0	0x40
18 #define AO_OSCIN_CNTL		0x58
19 #define AO_CRT_CLK_CNTL1	0x68
20 #define AO_RTC_ALT_CLK_CNTL0	0x94
21 #define AO_RTC_ALT_CLK_CNTL1	0x98
22 
23 #define GXBB_AO_GATE(_name, _bit)					\
24 static struct clk_regmap _name##_ao = {					\
25 	.data = &(struct clk_regmap_gate_data) {			\
26 		.offset = AO_RTI_GEN_CNTL_REG0,				\
27 		.bit_idx = (_bit),					\
28 	},								\
29 	.hw.init = &(struct clk_init_data) {				\
30 		.name = #_name "_ao",					\
31 		.ops = &clk_regmap_gate_ops,				\
32 		.parent_data = &(const struct clk_parent_data) {	\
33 			.fw_name = "mpeg-clk",				\
34 		},							\
35 		.num_parents = 1,					\
36 		.flags = CLK_IGNORE_UNUSED,				\
37 	},								\
38 }
39 
40 GXBB_AO_GATE(remote, 0);
41 GXBB_AO_GATE(i2c_master, 1);
42 GXBB_AO_GATE(i2c_slave, 2);
43 GXBB_AO_GATE(uart1, 3);
44 GXBB_AO_GATE(uart2, 5);
45 GXBB_AO_GATE(ir_blaster, 6);
46 
47 static struct clk_regmap ao_cts_oscin = {
48 	.data = &(struct clk_regmap_gate_data){
49 		.offset = AO_RTI_PWR_CNTL_REG0,
50 		.bit_idx = 6,
51 	},
52 	.hw.init = &(struct clk_init_data){
53 		.name = "ao_cts_oscin",
54 		.ops = &clk_regmap_gate_ro_ops,
55 		.parent_data = &(const struct clk_parent_data) {
56 			.fw_name = "xtal",
57 		},
58 		.num_parents = 1,
59 	},
60 };
61 
62 static struct clk_regmap ao_32k_pre = {
63 	.data = &(struct clk_regmap_gate_data){
64 		.offset = AO_RTC_ALT_CLK_CNTL0,
65 		.bit_idx = 31,
66 	},
67 	.hw.init = &(struct clk_init_data){
68 		.name = "ao_32k_pre",
69 		.ops = &clk_regmap_gate_ops,
70 		.parent_hws = (const struct clk_hw *[]) { &ao_cts_oscin.hw },
71 		.num_parents = 1,
72 	},
73 };
74 
75 static const struct meson_clk_dualdiv_param gxbb_32k_div_table[] = {
76 	{
77 		.dual	= 1,
78 		.n1	= 733,
79 		.m1	= 8,
80 		.n2	= 732,
81 		.m2	= 11,
82 	}, {}
83 };
84 
85 static struct clk_regmap ao_32k_div = {
86 	.data = &(struct meson_clk_dualdiv_data){
87 		.n1 = {
88 			.reg_off = AO_RTC_ALT_CLK_CNTL0,
89 			.shift   = 0,
90 			.width   = 12,
91 		},
92 		.n2 = {
93 			.reg_off = AO_RTC_ALT_CLK_CNTL0,
94 			.shift   = 12,
95 			.width   = 12,
96 		},
97 		.m1 = {
98 			.reg_off = AO_RTC_ALT_CLK_CNTL1,
99 			.shift   = 0,
100 			.width   = 12,
101 		},
102 		.m2 = {
103 			.reg_off = AO_RTC_ALT_CLK_CNTL1,
104 			.shift   = 12,
105 			.width   = 12,
106 		},
107 		.dual = {
108 			.reg_off = AO_RTC_ALT_CLK_CNTL0,
109 			.shift   = 28,
110 			.width   = 1,
111 		},
112 		.table = gxbb_32k_div_table,
113 	},
114 	.hw.init = &(struct clk_init_data){
115 		.name = "ao_32k_div",
116 		.ops = &meson_clk_dualdiv_ops,
117 		.parent_hws = (const struct clk_hw *[]) { &ao_32k_pre.hw },
118 		.num_parents = 1,
119 	},
120 };
121 
122 static struct clk_regmap ao_32k_sel = {
123 	.data = &(struct clk_regmap_mux_data) {
124 		.offset = AO_RTC_ALT_CLK_CNTL1,
125 		.mask = 0x1,
126 		.shift = 24,
127 		.flags = CLK_MUX_ROUND_CLOSEST,
128 	},
129 	.hw.init = &(struct clk_init_data){
130 		.name = "ao_32k_sel",
131 		.ops = &clk_regmap_mux_ops,
132 		.parent_hws = (const struct clk_hw *[]) {
133 			&ao_32k_div.hw,
134 			&ao_32k_pre.hw
135 		},
136 		.num_parents = 2,
137 		.flags = CLK_SET_RATE_PARENT,
138 	},
139 };
140 
141 static struct clk_regmap ao_32k = {
142 	.data = &(struct clk_regmap_gate_data){
143 		.offset = AO_RTC_ALT_CLK_CNTL0,
144 		.bit_idx = 30,
145 	},
146 	.hw.init = &(struct clk_init_data){
147 		.name = "ao_32k",
148 		.ops = &clk_regmap_gate_ops,
149 		.parent_hws = (const struct clk_hw *[]) { &ao_32k_sel.hw },
150 		.num_parents = 1,
151 		.flags = CLK_SET_RATE_PARENT,
152 	},
153 };
154 
155 static struct clk_regmap ao_cts_rtc_oscin = {
156 	.data = &(struct clk_regmap_mux_data) {
157 		.offset = AO_RTI_PWR_CNTL_REG0,
158 		.mask = 0x7,
159 		.shift = 10,
160 		.table = (u32[]){ 1, 2, 3, 4 },
161 		.flags = CLK_MUX_ROUND_CLOSEST,
162 	},
163 	.hw.init = &(struct clk_init_data){
164 		.name = "ao_cts_rtc_oscin",
165 		.ops = &clk_regmap_mux_ops,
166 		.parent_data = (const struct clk_parent_data []) {
167 			{ .fw_name = "ext-32k-0", },
168 			{ .fw_name = "ext-32k-1", },
169 			{ .fw_name = "ext-32k-2", },
170 			{ .hw = &ao_32k.hw },
171 		},
172 		.num_parents = 4,
173 		.flags = CLK_SET_RATE_PARENT,
174 	},
175 };
176 
177 static struct clk_regmap ao_clk81 = {
178 	.data = &(struct clk_regmap_mux_data) {
179 		.offset = AO_RTI_PWR_CNTL_REG0,
180 		.mask = 0x1,
181 		.shift = 0,
182 		.flags = CLK_MUX_ROUND_CLOSEST,
183 	},
184 	.hw.init = &(struct clk_init_data){
185 		.name = "ao_clk81",
186 		.ops = &clk_regmap_mux_ro_ops,
187 		.parent_data = (const struct clk_parent_data []) {
188 			{ .fw_name = "mpeg-clk", },
189 			{ .hw = &ao_cts_rtc_oscin.hw },
190 		},
191 		.num_parents = 2,
192 		.flags = CLK_SET_RATE_PARENT,
193 	},
194 };
195 
196 static struct clk_regmap ao_cts_cec = {
197 	.data = &(struct clk_regmap_mux_data) {
198 		.offset = AO_CRT_CLK_CNTL1,
199 		.mask = 0x1,
200 		.shift = 27,
201 		.flags = CLK_MUX_ROUND_CLOSEST,
202 	},
203 	.hw.init = &(struct clk_init_data){
204 		.name = "ao_cts_cec",
205 		.ops = &clk_regmap_mux_ops,
206 		/*
207 		 * FIXME: The 'fixme' parent obviously does not exist.
208 		 *
209 		 * ATM, CCF won't call get_parent() if num_parents is 1. It
210 		 * does not allow NULL as a parent name either.
211 		 *
212 		 * On this particular mux, we only know the input #1 parent
213 		 * but, on boot, unknown input #0 is set, so it is critical
214 		 * to call .get_parent() on it
215 		 *
216 		 * Until CCF gets fixed, adding this fake parent that won't
217 		 * ever be registered should work around the problem
218 		 */
219 		.parent_data = (const struct clk_parent_data []) {
220 			{ .name = "fixme", .index = -1, },
221 			{ .hw = &ao_cts_rtc_oscin.hw },
222 		},
223 		.num_parents = 2,
224 		.flags = CLK_SET_RATE_PARENT,
225 	},
226 };
227 
228 static const unsigned int gxbb_aoclk_reset[] = {
229 	[RESET_AO_REMOTE] = 16,
230 	[RESET_AO_I2C_MASTER] = 18,
231 	[RESET_AO_I2C_SLAVE] = 19,
232 	[RESET_AO_UART1] = 17,
233 	[RESET_AO_UART2] = 22,
234 	[RESET_AO_IR_BLASTER] = 23,
235 };
236 
237 static struct clk_regmap *gxbb_aoclk[] = {
238 	&remote_ao,
239 	&i2c_master_ao,
240 	&i2c_slave_ao,
241 	&uart1_ao,
242 	&uart2_ao,
243 	&ir_blaster_ao,
244 	&ao_cts_oscin,
245 	&ao_32k_pre,
246 	&ao_32k_div,
247 	&ao_32k_sel,
248 	&ao_32k,
249 	&ao_cts_rtc_oscin,
250 	&ao_clk81,
251 	&ao_cts_cec,
252 };
253 
254 static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
255 	.hws = {
256 		[CLKID_AO_REMOTE] = &remote_ao.hw,
257 		[CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
258 		[CLKID_AO_I2C_SLAVE] = &i2c_slave_ao.hw,
259 		[CLKID_AO_UART1] = &uart1_ao.hw,
260 		[CLKID_AO_UART2] = &uart2_ao.hw,
261 		[CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
262 		[CLKID_AO_CEC_32K] = &ao_cts_cec.hw,
263 		[CLKID_AO_CTS_OSCIN] = &ao_cts_oscin.hw,
264 		[CLKID_AO_32K_PRE] = &ao_32k_pre.hw,
265 		[CLKID_AO_32K_DIV] = &ao_32k_div.hw,
266 		[CLKID_AO_32K_SEL] = &ao_32k_sel.hw,
267 		[CLKID_AO_32K] = &ao_32k.hw,
268 		[CLKID_AO_CTS_RTC_OSCIN] = &ao_cts_rtc_oscin.hw,
269 		[CLKID_AO_CLK81] = &ao_clk81.hw,
270 	},
271 	.num = NR_CLKS,
272 };
273 
274 static const struct meson_aoclk_data gxbb_aoclkc_data = {
275 	.reset_reg	= AO_RTI_GEN_CNTL_REG0,
276 	.num_reset	= ARRAY_SIZE(gxbb_aoclk_reset),
277 	.reset		= gxbb_aoclk_reset,
278 	.num_clks	= ARRAY_SIZE(gxbb_aoclk),
279 	.clks		= gxbb_aoclk,
280 	.hw_data	= &gxbb_aoclk_onecell_data,
281 };
282 
283 static const struct of_device_id gxbb_aoclkc_match_table[] = {
284 	{
285 		.compatible	= "amlogic,meson-gx-aoclkc",
286 		.data		= &gxbb_aoclkc_data,
287 	},
288 	{ }
289 };
290 
291 static struct platform_driver gxbb_aoclkc_driver = {
292 	.probe		= meson_aoclkc_probe,
293 	.driver		= {
294 		.name	= "gxbb-aoclkc",
295 		.of_match_table = gxbb_aoclkc_match_table,
296 	},
297 };
298 builtin_platform_driver(gxbb_aoclkc_driver);
299