xref: /openbmc/linux/drivers/clk/meson/clk-pll.c (revision 6b5fc336)
1 /*
2  * Copyright (c) 2015 Endless Mobile, Inc.
3  * Author: Carlo Caione <carlo@endlessm.com>
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms and conditions of the GNU General Public License,
7  * version 2, as published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program.  If not, see <http://www.gnu.org/licenses/>.
16  */
17 
18 /*
19  * In the most basic form, a Meson PLL is composed as follows:
20  *
21  *                     PLL
22  *      +------------------------------+
23  *      |                              |
24  * in -----[ /N ]---[ *M ]---[ >>OD ]----->> out
25  *      |         ^        ^           |
26  *      +------------------------------+
27  *                |        |
28  *               FREF     VCO
29  *
30  * out = (in * M / N) >> OD
31  */
32 
33 #include <linux/clk-provider.h>
34 #include <linux/delay.h>
35 #include <linux/err.h>
36 #include <linux/io.h>
37 #include <linux/module.h>
38 #include <linux/of_address.h>
39 #include <linux/slab.h>
40 #include <linux/string.h>
41 
42 #include "clkc.h"
43 
44 #define MESON_PLL_RESET				BIT(29)
45 #define MESON_PLL_LOCK				BIT(31)
46 
47 #define to_meson_clk_pll(_hw) container_of(_hw, struct meson_clk_pll, hw)
48 
49 static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
50 						unsigned long parent_rate)
51 {
52 	struct meson_clk_pll *pll = to_meson_clk_pll(hw);
53 	struct parm *p;
54 	unsigned long parent_rate_mhz = parent_rate / 1000000;
55 	unsigned long rate_mhz;
56 	u16 n, m, frac = 0, od, od2 = 0;
57 	u32 reg;
58 
59 	p = &pll->n;
60 	reg = readl(pll->base + p->reg_off);
61 	n = PARM_GET(p->width, p->shift, reg);
62 
63 	p = &pll->m;
64 	reg = readl(pll->base + p->reg_off);
65 	m = PARM_GET(p->width, p->shift, reg);
66 
67 	p = &pll->od;
68 	reg = readl(pll->base + p->reg_off);
69 	od = PARM_GET(p->width, p->shift, reg);
70 
71 	p = &pll->od2;
72 	if (p->width) {
73 		reg = readl(pll->base + p->reg_off);
74 		od2 = PARM_GET(p->width, p->shift, reg);
75 	}
76 
77 	p = &pll->frac;
78 	if (p->width) {
79 		reg = readl(pll->base + p->reg_off);
80 		frac = PARM_GET(p->width, p->shift, reg);
81 		rate_mhz = (parent_rate_mhz * m + \
82 				(parent_rate_mhz * frac >> 12)) * 2 / n;
83 		rate_mhz = rate_mhz >> od >> od2;
84 	} else
85 		rate_mhz = (parent_rate_mhz * m / n) >> od >> od2;
86 
87 	return rate_mhz * 1000000;
88 }
89 
90 static long meson_clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
91 				     unsigned long *parent_rate)
92 {
93 	struct meson_clk_pll *pll = to_meson_clk_pll(hw);
94 	const struct pll_rate_table *rate_table = pll->rate_table;
95 	int i;
96 
97 	for (i = 0; i < pll->rate_count; i++) {
98 		if (rate <= rate_table[i].rate)
99 			return rate_table[i].rate;
100 	}
101 
102 	/* else return the smallest value */
103 	return rate_table[0].rate;
104 }
105 
106 static const struct pll_rate_table *meson_clk_get_pll_settings(struct meson_clk_pll *pll,
107 							       unsigned long rate)
108 {
109 	const struct pll_rate_table *rate_table = pll->rate_table;
110 	int i;
111 
112 	for (i = 0; i < pll->rate_count; i++) {
113 		if (rate == rate_table[i].rate)
114 			return &rate_table[i];
115 	}
116 	return NULL;
117 }
118 
119 /* Specific wait loop for GXL/GXM GP0 PLL */
120 static int meson_clk_pll_wait_lock_reset(struct meson_clk_pll *pll,
121 					 struct parm *p_n)
122 {
123 	int delay = 100;
124 	u32 reg;
125 
126 	while (delay > 0) {
127 		reg = readl(pll->base + p_n->reg_off);
128 		writel(reg | MESON_PLL_RESET, pll->base + p_n->reg_off);
129 		udelay(10);
130 		writel(reg & ~MESON_PLL_RESET, pll->base + p_n->reg_off);
131 
132 		/* This delay comes from AMLogic tree clk-gp0-gxl driver */
133 		mdelay(1);
134 
135 		reg = readl(pll->base + p_n->reg_off);
136 		if (reg & MESON_PLL_LOCK)
137 			return 0;
138 		delay--;
139 	}
140 	return -ETIMEDOUT;
141 }
142 
143 static int meson_clk_pll_wait_lock(struct meson_clk_pll *pll,
144 				   struct parm *p_n)
145 {
146 	int delay = 24000000;
147 	u32 reg;
148 
149 	while (delay > 0) {
150 		reg = readl(pll->base + p_n->reg_off);
151 
152 		if (reg & MESON_PLL_LOCK)
153 			return 0;
154 		delay--;
155 	}
156 	return -ETIMEDOUT;
157 }
158 
159 static void meson_clk_pll_init_params(struct meson_clk_pll *pll)
160 {
161 	int i;
162 
163 	for (i = 0 ; i < pll->params.params_count ; ++i)
164 		writel(pll->params.params_table[i].value,
165 		       pll->base + pll->params.params_table[i].reg_off);
166 }
167 
168 static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
169 				  unsigned long parent_rate)
170 {
171 	struct meson_clk_pll *pll = to_meson_clk_pll(hw);
172 	struct parm *p;
173 	const struct pll_rate_table *rate_set;
174 	unsigned long old_rate;
175 	int ret = 0;
176 	u32 reg;
177 
178 	if (parent_rate == 0 || rate == 0)
179 		return -EINVAL;
180 
181 	old_rate = rate;
182 
183 	rate_set = meson_clk_get_pll_settings(pll, rate);
184 	if (!rate_set)
185 		return -EINVAL;
186 
187 	/* Initialize the PLL in a clean state if specified */
188 	if (pll->params.params_count)
189 		meson_clk_pll_init_params(pll);
190 
191 	/* PLL reset */
192 	p = &pll->n;
193 	reg = readl(pll->base + p->reg_off);
194 	/* If no_init_reset is provided, avoid resetting at this point */
195 	if (!pll->params.no_init_reset)
196 		writel(reg | MESON_PLL_RESET, pll->base + p->reg_off);
197 
198 	reg = PARM_SET(p->width, p->shift, reg, rate_set->n);
199 	writel(reg, pll->base + p->reg_off);
200 
201 	p = &pll->m;
202 	reg = readl(pll->base + p->reg_off);
203 	reg = PARM_SET(p->width, p->shift, reg, rate_set->m);
204 	writel(reg, pll->base + p->reg_off);
205 
206 	p = &pll->od;
207 	reg = readl(pll->base + p->reg_off);
208 	reg = PARM_SET(p->width, p->shift, reg, rate_set->od);
209 	writel(reg, pll->base + p->reg_off);
210 
211 	p = &pll->od2;
212 	if (p->width) {
213 		reg = readl(pll->base + p->reg_off);
214 		reg = PARM_SET(p->width, p->shift, reg, rate_set->od2);
215 		writel(reg, pll->base + p->reg_off);
216 	}
217 
218 	p = &pll->frac;
219 	if (p->width) {
220 		reg = readl(pll->base + p->reg_off);
221 		reg = PARM_SET(p->width, p->shift, reg, rate_set->frac);
222 		writel(reg, pll->base + p->reg_off);
223 	}
224 
225 	p = &pll->n;
226 	/* If clear_reset_for_lock is provided, remove the reset bit here */
227 	if (pll->params.clear_reset_for_lock) {
228 		reg = readl(pll->base + p->reg_off);
229 		writel(reg & ~MESON_PLL_RESET, pll->base + p->reg_off);
230 	}
231 
232 	/* If reset_lock_loop, use a special loop including resetting */
233 	if (pll->params.reset_lock_loop)
234 		ret = meson_clk_pll_wait_lock_reset(pll, p);
235 	else
236 		ret = meson_clk_pll_wait_lock(pll, p);
237 	if (ret) {
238 		pr_warn("%s: pll did not lock, trying to restore old rate %lu\n",
239 			__func__, old_rate);
240 		meson_clk_pll_set_rate(hw, old_rate, parent_rate);
241 	}
242 
243 	return ret;
244 }
245 
246 const struct clk_ops meson_clk_pll_ops = {
247 	.recalc_rate	= meson_clk_pll_recalc_rate,
248 	.round_rate	= meson_clk_pll_round_rate,
249 	.set_rate	= meson_clk_pll_set_rate,
250 };
251 
252 const struct clk_ops meson_clk_pll_ro_ops = {
253 	.recalc_rate	= meson_clk_pll_recalc_rate,
254 };
255