1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * PLL clock driver for Keystone devices 4 * 5 * Copyright (C) 2013 Texas Instruments Inc. 6 * Murali Karicheri <m-karicheri2@ti.com> 7 * Santosh Shilimkar <santosh.shilimkar@ti.com> 8 */ 9 #include <linux/clk-provider.h> 10 #include <linux/err.h> 11 #include <linux/io.h> 12 #include <linux/slab.h> 13 #include <linux/of_address.h> 14 #include <linux/of.h> 15 #include <linux/module.h> 16 17 #define PLLM_LOW_MASK 0x3f 18 #define PLLM_HIGH_MASK 0x7ffc0 19 #define MAIN_PLLM_HIGH_MASK 0x7f000 20 #define PLLM_HIGH_SHIFT 6 21 #define PLLD_MASK 0x3f 22 #define CLKOD_MASK 0x780000 23 #define CLKOD_SHIFT 19 24 25 /** 26 * struct clk_pll_data - pll data structure 27 * @has_pllctrl: If set to non zero, lower 6 bits of multiplier is in pllm 28 * register of pll controller, else it is in the pll_ctrl0((bit 11-6) 29 * @phy_pllm: Physical address of PLLM in pll controller. Used when 30 * has_pllctrl is non zero. 31 * @phy_pll_ctl0: Physical address of PLL ctrl0. This could be that of 32 * Main PLL or any other PLLs in the device such as ARM PLL, DDR PLL 33 * or PA PLL available on keystone2. These PLLs are controlled by 34 * this register. Main PLL is controlled by a PLL controller. 35 * @pllm: PLL register map address for multiplier bits 36 * @pllod: PLL register map address for post divider bits 37 * @pll_ctl0: PLL controller map address 38 * @pllm_lower_mask: multiplier lower mask 39 * @pllm_upper_mask: multiplier upper mask 40 * @pllm_upper_shift: multiplier upper shift 41 * @plld_mask: divider mask 42 * @clkod_mask: output divider mask 43 * @clkod_shift: output divider shift 44 * @plld_mask: divider mask 45 * @postdiv: Fixed post divider 46 */ 47 struct clk_pll_data { 48 bool has_pllctrl; 49 u32 phy_pllm; 50 u32 phy_pll_ctl0; 51 void __iomem *pllm; 52 void __iomem *pllod; 53 void __iomem *pll_ctl0; 54 u32 pllm_lower_mask; 55 u32 pllm_upper_mask; 56 u32 pllm_upper_shift; 57 u32 plld_mask; 58 u32 clkod_mask; 59 u32 clkod_shift; 60 u32 postdiv; 61 }; 62 63 /** 64 * struct clk_pll - Main pll clock 65 * @hw: clk_hw for the pll 66 * @pll_data: PLL driver specific data 67 */ 68 struct clk_pll { 69 struct clk_hw hw; 70 struct clk_pll_data *pll_data; 71 }; 72 73 #define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) 74 75 static unsigned long clk_pllclk_recalc(struct clk_hw *hw, 76 unsigned long parent_rate) 77 { 78 struct clk_pll *pll = to_clk_pll(hw); 79 struct clk_pll_data *pll_data = pll->pll_data; 80 unsigned long rate = parent_rate; 81 u32 mult = 0, prediv, postdiv, val; 82 83 /* 84 * get bits 0-5 of multiplier from pllctrl PLLM register 85 * if has_pllctrl is non zero 86 */ 87 if (pll_data->has_pllctrl) { 88 val = readl(pll_data->pllm); 89 mult = (val & pll_data->pllm_lower_mask); 90 } 91 92 /* bit6-12 of PLLM is in Main PLL control register */ 93 val = readl(pll_data->pll_ctl0); 94 mult |= ((val & pll_data->pllm_upper_mask) 95 >> pll_data->pllm_upper_shift); 96 prediv = (val & pll_data->plld_mask); 97 98 if (!pll_data->has_pllctrl) 99 /* read post divider from od bits*/ 100 postdiv = ((val & pll_data->clkod_mask) >> 101 pll_data->clkod_shift) + 1; 102 else if (pll_data->pllod) { 103 postdiv = readl(pll_data->pllod); 104 postdiv = ((postdiv & pll_data->clkod_mask) >> 105 pll_data->clkod_shift) + 1; 106 } else 107 postdiv = pll_data->postdiv; 108 109 rate /= (prediv + 1); 110 rate = (rate * (mult + 1)); 111 rate /= postdiv; 112 113 return rate; 114 } 115 116 static const struct clk_ops clk_pll_ops = { 117 .recalc_rate = clk_pllclk_recalc, 118 }; 119 120 static struct clk *clk_register_pll(struct device *dev, 121 const char *name, 122 const char *parent_name, 123 struct clk_pll_data *pll_data) 124 { 125 struct clk_init_data init; 126 struct clk_pll *pll; 127 struct clk *clk; 128 129 pll = kzalloc(sizeof(*pll), GFP_KERNEL); 130 if (!pll) 131 return ERR_PTR(-ENOMEM); 132 133 init.name = name; 134 init.ops = &clk_pll_ops; 135 init.flags = 0; 136 init.parent_names = (parent_name ? &parent_name : NULL); 137 init.num_parents = (parent_name ? 1 : 0); 138 139 pll->pll_data = pll_data; 140 pll->hw.init = &init; 141 142 clk = clk_register(NULL, &pll->hw); 143 if (IS_ERR(clk)) 144 goto out; 145 146 return clk; 147 out: 148 kfree(pll); 149 return NULL; 150 } 151 152 /** 153 * _of_pll_clk_init - PLL initialisation via DT 154 * @node: device tree node for this clock 155 * @pllctrl: If true, lower 6 bits of multiplier is in pllm register of 156 * pll controller, else it is in the control register0(bit 11-6) 157 */ 158 static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl) 159 { 160 struct clk_pll_data *pll_data; 161 const char *parent_name; 162 struct clk *clk; 163 int i; 164 165 pll_data = kzalloc(sizeof(*pll_data), GFP_KERNEL); 166 if (!pll_data) { 167 pr_err("%s: Out of memory\n", __func__); 168 return; 169 } 170 171 parent_name = of_clk_get_parent_name(node, 0); 172 if (of_property_read_u32(node, "fixed-postdiv", &pll_data->postdiv)) { 173 /* assume the PLL has output divider register bits */ 174 pll_data->clkod_mask = CLKOD_MASK; 175 pll_data->clkod_shift = CLKOD_SHIFT; 176 177 /* 178 * Check if there is an post-divider register. If not 179 * assume od bits are part of control register. 180 */ 181 i = of_property_match_string(node, "reg-names", 182 "post-divider"); 183 pll_data->pllod = of_iomap(node, i); 184 } 185 186 i = of_property_match_string(node, "reg-names", "control"); 187 pll_data->pll_ctl0 = of_iomap(node, i); 188 if (!pll_data->pll_ctl0) { 189 pr_err("%s: ioremap failed\n", __func__); 190 iounmap(pll_data->pllod); 191 goto out; 192 } 193 194 pll_data->pllm_lower_mask = PLLM_LOW_MASK; 195 pll_data->pllm_upper_shift = PLLM_HIGH_SHIFT; 196 pll_data->plld_mask = PLLD_MASK; 197 pll_data->has_pllctrl = pllctrl; 198 if (!pll_data->has_pllctrl) { 199 pll_data->pllm_upper_mask = PLLM_HIGH_MASK; 200 } else { 201 pll_data->pllm_upper_mask = MAIN_PLLM_HIGH_MASK; 202 i = of_property_match_string(node, "reg-names", "multiplier"); 203 pll_data->pllm = of_iomap(node, i); 204 if (!pll_data->pllm) { 205 iounmap(pll_data->pll_ctl0); 206 iounmap(pll_data->pllod); 207 goto out; 208 } 209 } 210 211 clk = clk_register_pll(NULL, node->name, parent_name, pll_data); 212 if (!IS_ERR_OR_NULL(clk)) { 213 of_clk_add_provider(node, of_clk_src_simple_get, clk); 214 return; 215 } 216 217 out: 218 pr_err("%s: error initializing pll %pOFn\n", __func__, node); 219 kfree(pll_data); 220 } 221 222 /** 223 * of_keystone_pll_clk_init - PLL initialisation DT wrapper 224 * @node: device tree node for this clock 225 */ 226 static void __init of_keystone_pll_clk_init(struct device_node *node) 227 { 228 _of_pll_clk_init(node, false); 229 } 230 CLK_OF_DECLARE(keystone_pll_clock, "ti,keystone,pll-clock", 231 of_keystone_pll_clk_init); 232 233 /** 234 * of_keystone_main_pll_clk_init - Main PLL initialisation DT wrapper 235 * @node: device tree node for this clock 236 */ 237 static void __init of_keystone_main_pll_clk_init(struct device_node *node) 238 { 239 _of_pll_clk_init(node, true); 240 } 241 CLK_OF_DECLARE(keystone_main_pll_clock, "ti,keystone,main-pll-clock", 242 of_keystone_main_pll_clk_init); 243 244 /** 245 * of_pll_div_clk_init - PLL divider setup function 246 * @node: device tree node for this clock 247 */ 248 static void __init of_pll_div_clk_init(struct device_node *node) 249 { 250 const char *parent_name; 251 void __iomem *reg; 252 u32 shift, mask; 253 struct clk *clk; 254 const char *clk_name = node->name; 255 256 of_property_read_string(node, "clock-output-names", &clk_name); 257 reg = of_iomap(node, 0); 258 if (!reg) { 259 pr_err("%s: ioremap failed\n", __func__); 260 return; 261 } 262 263 parent_name = of_clk_get_parent_name(node, 0); 264 if (!parent_name) { 265 pr_err("%s: missing parent clock\n", __func__); 266 iounmap(reg); 267 return; 268 } 269 270 if (of_property_read_u32(node, "bit-shift", &shift)) { 271 pr_err("%s: missing 'shift' property\n", __func__); 272 iounmap(reg); 273 return; 274 } 275 276 if (of_property_read_u32(node, "bit-mask", &mask)) { 277 pr_err("%s: missing 'bit-mask' property\n", __func__); 278 iounmap(reg); 279 return; 280 } 281 282 clk = clk_register_divider(NULL, clk_name, parent_name, 0, reg, shift, 283 mask, 0, NULL); 284 if (IS_ERR(clk)) { 285 pr_err("%s: error registering divider %s\n", __func__, clk_name); 286 iounmap(reg); 287 return; 288 } 289 290 of_clk_add_provider(node, of_clk_src_simple_get, clk); 291 } 292 CLK_OF_DECLARE(pll_divider_clock, "ti,keystone,pll-divider-clock", of_pll_div_clk_init); 293 294 /** 295 * of_pll_mux_clk_init - PLL mux setup function 296 * @node: device tree node for this clock 297 */ 298 static void __init of_pll_mux_clk_init(struct device_node *node) 299 { 300 void __iomem *reg; 301 u32 shift, mask; 302 struct clk *clk; 303 const char *parents[2]; 304 const char *clk_name = node->name; 305 306 of_property_read_string(node, "clock-output-names", &clk_name); 307 reg = of_iomap(node, 0); 308 if (!reg) { 309 pr_err("%s: ioremap failed\n", __func__); 310 return; 311 } 312 313 of_clk_parent_fill(node, parents, 2); 314 if (!parents[0] || !parents[1]) { 315 pr_err("%s: missing parent clocks\n", __func__); 316 return; 317 } 318 319 if (of_property_read_u32(node, "bit-shift", &shift)) { 320 pr_err("%s: missing 'shift' property\n", __func__); 321 return; 322 } 323 324 if (of_property_read_u32(node, "bit-mask", &mask)) { 325 pr_err("%s: missing 'bit-mask' property\n", __func__); 326 return; 327 } 328 329 clk = clk_register_mux(NULL, clk_name, (const char **)&parents, 330 ARRAY_SIZE(parents) , 0, reg, shift, mask, 331 0, NULL); 332 if (IS_ERR(clk)) { 333 pr_err("%s: error registering mux %s\n", __func__, clk_name); 334 return; 335 } 336 337 of_clk_add_provider(node, of_clk_src_simple_get, clk); 338 } 339 CLK_OF_DECLARE(pll_mux_clock, "ti,keystone,pll-mux-clock", of_pll_mux_clk_init); 340 341 MODULE_LICENSE("GPL"); 342 MODULE_DESCRIPTION("PLL clock driver for Keystone devices"); 343 MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>"); 344 MODULE_AUTHOR("Santosh Shilimkar <santosh.shilimkar@ti.com>"); 345