xref: /openbmc/linux/drivers/clk/ingenic/x1830-cgu.c (revision 11c416e3)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * X1830 SoC CGU driver
4  * Copyright (c) 2019 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
5  */
6 
7 #include <linux/clk-provider.h>
8 #include <linux/delay.h>
9 #include <linux/io.h>
10 #include <linux/of.h>
11 
12 #include <dt-bindings/clock/x1830-cgu.h>
13 
14 #include "cgu.h"
15 #include "pm.h"
16 
17 /* CGU register offsets */
18 #define CGU_REG_CPCCR		0x00
19 #define CGU_REG_CPPCR		0x0c
20 #define CGU_REG_APLL		0x10
21 #define CGU_REG_MPLL		0x14
22 #define CGU_REG_CLKGR0		0x20
23 #define CGU_REG_OPCR		0x24
24 #define CGU_REG_CLKGR1		0x28
25 #define CGU_REG_DDRCDR		0x2c
26 #define CGU_REG_USBPCR		0x3c
27 #define CGU_REG_USBRDT		0x40
28 #define CGU_REG_USBVBFIL	0x44
29 #define CGU_REG_USBPCR1		0x48
30 #define CGU_REG_MACCDR		0x54
31 #define CGU_REG_EPLL		0x58
32 #define CGU_REG_I2SCDR		0x60
33 #define CGU_REG_LPCDR		0x64
34 #define CGU_REG_MSC0CDR		0x68
35 #define CGU_REG_I2SCDR1		0x70
36 #define CGU_REG_SSICDR		0x74
37 #define CGU_REG_CIMCDR		0x7c
38 #define CGU_REG_MSC1CDR		0xa4
39 #define CGU_REG_CMP_INTR	0xb0
40 #define CGU_REG_CMP_INTRE	0xb4
41 #define CGU_REG_DRCG		0xd0
42 #define CGU_REG_CPCSR		0xd4
43 #define CGU_REG_VPLL		0xe0
44 #define CGU_REG_MACPHYC		0xe8
45 
46 /* bits within the OPCR register */
47 #define OPCR_GATE_USBPHYCLK	BIT(23)
48 #define OPCR_SPENDN0		BIT(7)
49 #define OPCR_SPENDN1		BIT(6)
50 
51 /* bits within the USBPCR register */
52 #define USBPCR_SIDDQ		BIT(21)
53 #define USBPCR_OTG_DISABLE	BIT(20)
54 
55 static struct ingenic_cgu *cgu;
56 
57 static int x1830_usb_phy_enable(struct clk_hw *hw)
58 {
59 	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
60 	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
61 
62 	writel((readl(reg_opcr) | OPCR_SPENDN0) & ~OPCR_GATE_USBPHYCLK, reg_opcr);
63 	writel(readl(reg_usbpcr) & ~USBPCR_OTG_DISABLE & ~USBPCR_SIDDQ, reg_usbpcr);
64 	return 0;
65 }
66 
67 static void x1830_usb_phy_disable(struct clk_hw *hw)
68 {
69 	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
70 	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
71 
72 	writel((readl(reg_opcr) & ~OPCR_SPENDN0) | OPCR_GATE_USBPHYCLK, reg_opcr);
73 	writel(readl(reg_usbpcr) | USBPCR_OTG_DISABLE | USBPCR_SIDDQ, reg_usbpcr);
74 }
75 
76 static int x1830_usb_phy_is_enabled(struct clk_hw *hw)
77 {
78 	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
79 	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
80 
81 	return (readl(reg_opcr) & OPCR_SPENDN0) &&
82 		!(readl(reg_usbpcr) & USBPCR_SIDDQ) &&
83 		!(readl(reg_usbpcr) & USBPCR_OTG_DISABLE);
84 }
85 
86 static const struct clk_ops x1830_otg_phy_ops = {
87 	.enable		= x1830_usb_phy_enable,
88 	.disable	= x1830_usb_phy_disable,
89 	.is_enabled	= x1830_usb_phy_is_enabled,
90 };
91 
92 static const s8 pll_od_encoding[64] = {
93 	0x0, 0x1,  -1, 0x2,  -1,  -1,  -1, 0x3,
94 	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x4,
95 	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
96 	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x5,
97 	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
98 	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
99 	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
100 	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x6,
101 };
102 
103 static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
104 
105 	/* External clocks */
106 
107 	[X1830_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
108 	[X1830_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
109 
110 	/* PLLs */
111 
112 	[X1830_CLK_APLL] = {
113 		"apll", CGU_CLK_PLL,
114 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
115 		.pll = {
116 			.reg = CGU_REG_APLL,
117 			.rate_multiplier = 2,
118 			.m_shift = 20,
119 			.m_bits = 9,
120 			.m_offset = 1,
121 			.n_shift = 14,
122 			.n_bits = 6,
123 			.n_offset = 1,
124 			.od_shift = 11,
125 			.od_bits = 3,
126 			.od_max = 64,
127 			.od_encoding = pll_od_encoding,
128 			.bypass_reg = CGU_REG_CPPCR,
129 			.bypass_bit = 30,
130 			.enable_bit = 0,
131 			.stable_bit = 3,
132 		},
133 	},
134 
135 	[X1830_CLK_MPLL] = {
136 		"mpll", CGU_CLK_PLL,
137 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
138 		.pll = {
139 			.reg = CGU_REG_MPLL,
140 			.rate_multiplier = 2,
141 			.m_shift = 20,
142 			.m_bits = 9,
143 			.m_offset = 1,
144 			.n_shift = 14,
145 			.n_bits = 6,
146 			.n_offset = 1,
147 			.od_shift = 11,
148 			.od_bits = 3,
149 			.od_max = 64,
150 			.od_encoding = pll_od_encoding,
151 			.bypass_reg = CGU_REG_CPPCR,
152 			.bypass_bit = 28,
153 			.enable_bit = 0,
154 			.stable_bit = 3,
155 		},
156 	},
157 
158 	[X1830_CLK_EPLL] = {
159 		"epll", CGU_CLK_PLL,
160 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
161 		.pll = {
162 			.reg = CGU_REG_EPLL,
163 			.rate_multiplier = 2,
164 			.m_shift = 20,
165 			.m_bits = 9,
166 			.m_offset = 1,
167 			.n_shift = 14,
168 			.n_bits = 6,
169 			.n_offset = 1,
170 			.od_shift = 11,
171 			.od_bits = 3,
172 			.od_max = 64,
173 			.od_encoding = pll_od_encoding,
174 			.bypass_reg = CGU_REG_CPPCR,
175 			.bypass_bit = 24,
176 			.enable_bit = 0,
177 			.stable_bit = 3,
178 		},
179 	},
180 
181 	[X1830_CLK_VPLL] = {
182 		"vpll", CGU_CLK_PLL,
183 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
184 		.pll = {
185 			.reg = CGU_REG_VPLL,
186 			.rate_multiplier = 2,
187 			.m_shift = 20,
188 			.m_bits = 9,
189 			.m_offset = 1,
190 			.n_shift = 14,
191 			.n_bits = 6,
192 			.n_offset = 1,
193 			.od_shift = 11,
194 			.od_bits = 3,
195 			.od_max = 64,
196 			.od_encoding = pll_od_encoding,
197 			.bypass_reg = CGU_REG_CPPCR,
198 			.bypass_bit = 26,
199 			.enable_bit = 0,
200 			.stable_bit = 3,
201 		},
202 	},
203 
204 	/* Custom (SoC-specific) OTG PHY */
205 
206 	[X1830_CLK_OTGPHY] = {
207 		"otg_phy", CGU_CLK_CUSTOM,
208 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
209 		.custom = { &x1830_otg_phy_ops },
210 	},
211 
212 	/* Muxes & dividers */
213 
214 	[X1830_CLK_SCLKA] = {
215 		"sclk_a", CGU_CLK_MUX,
216 		.parents = { -1, X1830_CLK_EXCLK, X1830_CLK_APLL, -1 },
217 		.mux = { CGU_REG_CPCCR, 30, 2 },
218 	},
219 
220 	[X1830_CLK_CPUMUX] = {
221 		"cpu_mux", CGU_CLK_MUX,
222 		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
223 		.mux = { CGU_REG_CPCCR, 28, 2 },
224 	},
225 
226 	[X1830_CLK_CPU] = {
227 		"cpu", CGU_CLK_DIV | CGU_CLK_GATE,
228 		.parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
229 		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
230 		.gate = { CGU_REG_CLKGR1, 15 },
231 	},
232 
233 	[X1830_CLK_L2CACHE] = {
234 		"l2cache", CGU_CLK_DIV,
235 		.parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
236 		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
237 	},
238 
239 	[X1830_CLK_AHB0] = {
240 		"ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
241 		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
242 		.mux = { CGU_REG_CPCCR, 26, 2 },
243 		.div = { CGU_REG_CPCCR, 8, 1, 4, 21, -1, -1 },
244 	},
245 
246 	[X1830_CLK_AHB2PMUX] = {
247 		"ahb2_apb_mux", CGU_CLK_MUX,
248 		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
249 		.mux = { CGU_REG_CPCCR, 24, 2 },
250 	},
251 
252 	[X1830_CLK_AHB2] = {
253 		"ahb2", CGU_CLK_DIV,
254 		.parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
255 		.div = { CGU_REG_CPCCR, 12, 1, 4, 20, -1, -1 },
256 	},
257 
258 	[X1830_CLK_PCLK] = {
259 		"pclk", CGU_CLK_DIV | CGU_CLK_GATE,
260 		.parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
261 		.div = { CGU_REG_CPCCR, 16, 1, 4, 20, -1, -1 },
262 		.gate = { CGU_REG_CLKGR1, 14 },
263 	},
264 
265 	[X1830_CLK_DDR] = {
266 		"ddr", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
267 		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
268 		.mux = { CGU_REG_DDRCDR, 30, 2 },
269 		.div = { CGU_REG_DDRCDR, 0, 1, 4, 29, 28, 27 },
270 		.gate = { CGU_REG_CLKGR0, 31 },
271 	},
272 
273 	[X1830_CLK_MAC] = {
274 		"mac", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
275 		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
276 					 X1830_CLK_VPLL, X1830_CLK_EPLL },
277 		.mux = { CGU_REG_MACCDR, 30, 2 },
278 		.div = { CGU_REG_MACCDR, 0, 1, 8, 29, 28, 27 },
279 		.gate = { CGU_REG_CLKGR1, 4 },
280 	},
281 
282 	[X1830_CLK_LCD] = {
283 		"lcd", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
284 		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
285 					 X1830_CLK_VPLL, X1830_CLK_EPLL },
286 		.mux = { CGU_REG_LPCDR, 30, 2 },
287 		.div = { CGU_REG_LPCDR, 0, 1, 8, 28, 27, 26 },
288 		.gate = { CGU_REG_CLKGR1, 9 },
289 	},
290 
291 	[X1830_CLK_MSCMUX] = {
292 		"msc_mux", CGU_CLK_MUX,
293 		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
294 					 X1830_CLK_VPLL, X1830_CLK_EPLL },
295 		.mux = { CGU_REG_MSC0CDR, 30, 2 },
296 	},
297 
298 	[X1830_CLK_MSC0] = {
299 		"msc0", CGU_CLK_DIV | CGU_CLK_GATE,
300 		.parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
301 		.div = { CGU_REG_MSC0CDR, 0, 2, 8, 29, 28, 27 },
302 		.gate = { CGU_REG_CLKGR0, 4 },
303 	},
304 
305 	[X1830_CLK_MSC1] = {
306 		"msc1", CGU_CLK_DIV | CGU_CLK_GATE,
307 		.parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
308 		.div = { CGU_REG_MSC1CDR, 0, 2, 8, 29, 28, 27 },
309 		.gate = { CGU_REG_CLKGR0, 5 },
310 	},
311 
312 	[X1830_CLK_SSIPLL] = {
313 		"ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
314 		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
315 					 X1830_CLK_VPLL, X1830_CLK_EPLL },
316 		.mux = { CGU_REG_SSICDR, 30, 2 },
317 		.div = { CGU_REG_SSICDR, 0, 1, 8, 28, 27, 26 },
318 	},
319 
320 	[X1830_CLK_SSIPLL_DIV2] = {
321 		"ssi_pll_div2", CGU_CLK_FIXDIV,
322 		.parents = { X1830_CLK_SSIPLL },
323 		.fixdiv = { 2 },
324 	},
325 
326 	[X1830_CLK_SSIMUX] = {
327 		"ssi_mux", CGU_CLK_MUX,
328 		.parents = { X1830_CLK_EXCLK, X1830_CLK_SSIPLL_DIV2, -1, -1 },
329 		.mux = { CGU_REG_SSICDR, 29, 1 },
330 	},
331 
332 	/* Gate-only clocks */
333 
334 	[X1830_CLK_EMC] = {
335 		"emc", CGU_CLK_GATE,
336 		.parents = { X1830_CLK_AHB2, -1, -1, -1 },
337 		.gate = { CGU_REG_CLKGR0, 0 },
338 	},
339 
340 	[X1830_CLK_EFUSE] = {
341 		"efuse", CGU_CLK_GATE,
342 		.parents = { X1830_CLK_AHB2, -1, -1, -1 },
343 		.gate = { CGU_REG_CLKGR0, 1 },
344 	},
345 
346 	[X1830_CLK_OTG] = {
347 		"otg", CGU_CLK_GATE,
348 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
349 		.gate = { CGU_REG_CLKGR0, 3 },
350 	},
351 
352 	[X1830_CLK_SSI0] = {
353 		"ssi0", CGU_CLK_GATE,
354 		.parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
355 		.gate = { CGU_REG_CLKGR0, 6 },
356 	},
357 
358 	[X1830_CLK_SMB0] = {
359 		"smb0", CGU_CLK_GATE,
360 		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
361 		.gate = { CGU_REG_CLKGR0, 7 },
362 	},
363 
364 	[X1830_CLK_SMB1] = {
365 		"smb1", CGU_CLK_GATE,
366 		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
367 		.gate = { CGU_REG_CLKGR0, 8 },
368 	},
369 
370 	[X1830_CLK_SMB2] = {
371 		"smb2", CGU_CLK_GATE,
372 		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
373 		.gate = { CGU_REG_CLKGR0, 9 },
374 	},
375 
376 	[X1830_CLK_UART0] = {
377 		"uart0", CGU_CLK_GATE,
378 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
379 		.gate = { CGU_REG_CLKGR0, 14 },
380 	},
381 
382 	[X1830_CLK_UART1] = {
383 		"uart1", CGU_CLK_GATE,
384 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
385 		.gate = { CGU_REG_CLKGR0, 15 },
386 	},
387 
388 	[X1830_CLK_SSI1] = {
389 		"ssi1", CGU_CLK_GATE,
390 		.parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
391 		.gate = { CGU_REG_CLKGR0, 19 },
392 	},
393 
394 	[X1830_CLK_SFC] = {
395 		"sfc", CGU_CLK_GATE,
396 		.parents = { X1830_CLK_SSIPLL, -1, -1, -1 },
397 		.gate = { CGU_REG_CLKGR0, 20 },
398 	},
399 
400 	[X1830_CLK_PDMA] = {
401 		"pdma", CGU_CLK_GATE,
402 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
403 		.gate = { CGU_REG_CLKGR0, 21 },
404 	},
405 
406 	[X1830_CLK_TCU] = {
407 		"tcu", CGU_CLK_GATE,
408 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
409 		.gate = { CGU_REG_CLKGR0, 30 },
410 	},
411 
412 	[X1830_CLK_DTRNG] = {
413 		"dtrng", CGU_CLK_GATE,
414 		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
415 		.gate = { CGU_REG_CLKGR1, 1 },
416 	},
417 
418 	[X1830_CLK_OST] = {
419 		"ost", CGU_CLK_GATE,
420 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
421 		.gate = { CGU_REG_CLKGR1, 11 },
422 	},
423 };
424 
425 static void __init x1830_cgu_init(struct device_node *np)
426 {
427 	int retval;
428 
429 	cgu = ingenic_cgu_new(x1830_cgu_clocks,
430 			      ARRAY_SIZE(x1830_cgu_clocks), np);
431 	if (!cgu) {
432 		pr_err("%s: failed to initialise CGU\n", __func__);
433 		return;
434 	}
435 
436 	retval = ingenic_cgu_register_clocks(cgu);
437 	if (retval) {
438 		pr_err("%s: failed to register CGU Clocks\n", __func__);
439 		return;
440 	}
441 
442 	ingenic_cgu_register_syscore_ops(cgu);
443 }
444 /*
445  * CGU has some children devices, this is useful for probing children devices
446  * in the case where the device node is compatible with "simple-mfd".
447  */
448 CLK_OF_DECLARE_DRIVER(x1830_cgu, "ingenic,x1830-cgu", x1830_cgu_init);
449