xref: /openbmc/linux/drivers/clk/clk-max9485.c (revision 46290c6b)
1 // SPDX-License-Identifier: GPL-2.0
2 
3 #include <linux/module.h>
4 #include <linux/kernel.h>
5 #include <linux/clk.h>
6 #include <linux/clk-provider.h>
7 #include <linux/err.h>
8 #include <linux/errno.h>
9 #include <linux/gpio/consumer.h>
10 #include <linux/i2c.h>
11 #include <linux/regulator/consumer.h>
12 
13 #include <dt-bindings/clock/maxim,max9485.h>
14 
15 #define MAX9485_NUM_CLKS 4
16 
17 /* This chip has only one register of 8 bit width. */
18 
19 #define MAX9485_FS_12KHZ	(0 << 0)
20 #define MAX9485_FS_32KHZ	(1 << 0)
21 #define MAX9485_FS_44_1KHZ	(2 << 0)
22 #define MAX9485_FS_48KHZ	(3 << 0)
23 
24 #define MAX9485_SCALE_256	(0 << 2)
25 #define MAX9485_SCALE_384	(1 << 2)
26 #define MAX9485_SCALE_768	(2 << 2)
27 
28 #define MAX9485_DOUBLE		BIT(4)
29 #define MAX9485_CLKOUT1_ENABLE	BIT(5)
30 #define MAX9485_CLKOUT2_ENABLE	BIT(6)
31 #define MAX9485_MCLK_ENABLE	BIT(7)
32 #define MAX9485_FREQ_MASK	0x1f
33 
34 struct max9485_rate {
35 	unsigned long out;
36 	u8 reg_value;
37 };
38 
39 /*
40  * Ordered by frequency. For frequency the hardware can generate with
41  * multiple settings, the one with lowest jitter is listed first.
42  */
43 static const struct max9485_rate max9485_rates[] = {
44 	{  3072000, MAX9485_FS_12KHZ   | MAX9485_SCALE_256 },
45 	{  4608000, MAX9485_FS_12KHZ   | MAX9485_SCALE_384 },
46 	{  8192000, MAX9485_FS_32KHZ   | MAX9485_SCALE_256 },
47 	{  9126000, MAX9485_FS_12KHZ   | MAX9485_SCALE_768 },
48 	{ 11289600, MAX9485_FS_44_1KHZ | MAX9485_SCALE_256 },
49 	{ 12288000, MAX9485_FS_48KHZ   | MAX9485_SCALE_256 },
50 	{ 12288000, MAX9485_FS_32KHZ   | MAX9485_SCALE_384 },
51 	{ 16384000, MAX9485_FS_32KHZ   | MAX9485_SCALE_256 | MAX9485_DOUBLE },
52 	{ 16934400, MAX9485_FS_44_1KHZ | MAX9485_SCALE_384 },
53 	{ 18384000, MAX9485_FS_48KHZ   | MAX9485_SCALE_384 },
54 	{ 22579200, MAX9485_FS_44_1KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE },
55 	{ 24576000, MAX9485_FS_48KHZ   | MAX9485_SCALE_256 | MAX9485_DOUBLE },
56 	{ 24576000, MAX9485_FS_32KHZ   | MAX9485_SCALE_384 | MAX9485_DOUBLE },
57 	{ 24576000, MAX9485_FS_32KHZ   | MAX9485_SCALE_768 },
58 	{ 33868800, MAX9485_FS_44_1KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE },
59 	{ 33868800, MAX9485_FS_44_1KHZ | MAX9485_SCALE_768 },
60 	{ 36864000, MAX9485_FS_48KHZ   | MAX9485_SCALE_384 | MAX9485_DOUBLE },
61 	{ 36864000, MAX9485_FS_48KHZ   | MAX9485_SCALE_768 },
62 	{ 49152000, MAX9485_FS_32KHZ   | MAX9485_SCALE_768 | MAX9485_DOUBLE },
63 	{ 67737600, MAX9485_FS_44_1KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE },
64 	{ 73728000, MAX9485_FS_48KHZ   | MAX9485_SCALE_768 | MAX9485_DOUBLE },
65 	{ } /* sentinel */
66 };
67 
68 struct max9485_driver_data;
69 
70 struct max9485_clk_hw {
71 	struct clk_hw hw;
72 	struct clk_init_data init;
73 	u8 enable_bit;
74 	struct max9485_driver_data *drvdata;
75 };
76 
77 struct max9485_driver_data {
78 	struct clk *xclk;
79 	struct i2c_client *client;
80 	u8 reg_value;
81 	struct regulator *supply;
82 	struct gpio_desc *reset_gpio;
83 	struct max9485_clk_hw hw[MAX9485_NUM_CLKS];
84 };
85 
86 static inline struct max9485_clk_hw *to_max9485_clk(struct clk_hw *hw)
87 {
88 	return container_of(hw, struct max9485_clk_hw, hw);
89 }
90 
91 static int max9485_update_bits(struct max9485_driver_data *drvdata,
92 			       u8 mask, u8 value)
93 {
94 	int ret;
95 
96 	drvdata->reg_value &= ~mask;
97 	drvdata->reg_value |= value;
98 
99 	dev_dbg(&drvdata->client->dev,
100 		"updating mask 0x%02x value 0x%02x -> 0x%02x\n",
101 		mask, value, drvdata->reg_value);
102 
103 	ret = i2c_master_send(drvdata->client,
104 			      &drvdata->reg_value,
105 			      sizeof(drvdata->reg_value));
106 
107 	return ret < 0 ? ret : 0;
108 }
109 
110 static int max9485_clk_prepare(struct clk_hw *hw)
111 {
112 	struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
113 
114 	return max9485_update_bits(clk_hw->drvdata,
115 				   clk_hw->enable_bit,
116 				   clk_hw->enable_bit);
117 }
118 
119 static void max9485_clk_unprepare(struct clk_hw *hw)
120 {
121 	struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
122 
123 	max9485_update_bits(clk_hw->drvdata, clk_hw->enable_bit, 0);
124 }
125 
126 /*
127  * CLKOUT - configurable clock output
128  */
129 static int max9485_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
130 				   unsigned long parent_rate)
131 {
132 	struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
133 	const struct max9485_rate *entry;
134 
135 	for (entry = max9485_rates; entry->out != 0; entry++)
136 		if (entry->out == rate)
137 			break;
138 
139 	if (entry->out == 0)
140 		return -EINVAL;
141 
142 	return max9485_update_bits(clk_hw->drvdata,
143 				   MAX9485_FREQ_MASK,
144 				   entry->reg_value);
145 }
146 
147 static unsigned long max9485_clkout_recalc_rate(struct clk_hw *hw,
148 						unsigned long parent_rate)
149 {
150 	struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
151 	struct max9485_driver_data *drvdata = clk_hw->drvdata;
152 	u8 val = drvdata->reg_value & MAX9485_FREQ_MASK;
153 	const struct max9485_rate *entry;
154 
155 	for (entry = max9485_rates; entry->out != 0; entry++)
156 		if (val == entry->reg_value)
157 			return entry->out;
158 
159 	return 0;
160 }
161 
162 static long max9485_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
163 				      unsigned long *parent_rate)
164 {
165 	const struct max9485_rate *curr, *prev = NULL;
166 
167 	for (curr = max9485_rates; curr->out != 0; curr++) {
168 		/* Exact matches */
169 		if (curr->out == rate)
170 			return rate;
171 
172 		/*
173 		 * Find the first entry that has a frequency higher than the
174 		 * requested one.
175 		 */
176 		if (curr->out > rate) {
177 			unsigned int mid;
178 
179 			/*
180 			 * If this is the first entry, clamp the value to the
181 			 * lowest possible frequency.
182 			 */
183 			if (!prev)
184 				return curr->out;
185 
186 			/*
187 			 * Otherwise, determine whether the previous entry or
188 			 * current one is closer.
189 			 */
190 			mid = prev->out + ((curr->out - prev->out) / 2);
191 
192 			return (mid > rate) ? prev->out : curr->out;
193 		}
194 
195 		prev = curr;
196 	}
197 
198 	/* If the last entry was still too high, clamp the value */
199 	return prev->out;
200 }
201 
202 struct max9485_clk {
203 	const char *name;
204 	int parent_index;
205 	const struct clk_ops ops;
206 	u8 enable_bit;
207 };
208 
209 static const struct max9485_clk max9485_clks[MAX9485_NUM_CLKS] = {
210 	[MAX9485_MCLKOUT] = {
211 		.name = "mclkout",
212 		.parent_index = -1,
213 		.enable_bit = MAX9485_MCLK_ENABLE,
214 		.ops = {
215 			.prepare	= max9485_clk_prepare,
216 			.unprepare	= max9485_clk_unprepare,
217 		},
218 	},
219 	[MAX9485_CLKOUT] = {
220 		.name = "clkout",
221 		.parent_index = -1,
222 		.ops = {
223 			.set_rate	= max9485_clkout_set_rate,
224 			.round_rate	= max9485_clkout_round_rate,
225 			.recalc_rate	= max9485_clkout_recalc_rate,
226 		},
227 	},
228 	[MAX9485_CLKOUT1] = {
229 		.name = "clkout1",
230 		.parent_index = MAX9485_CLKOUT,
231 		.enable_bit = MAX9485_CLKOUT1_ENABLE,
232 		.ops = {
233 			.prepare	= max9485_clk_prepare,
234 			.unprepare	= max9485_clk_unprepare,
235 		},
236 	},
237 	[MAX9485_CLKOUT2] = {
238 		.name = "clkout2",
239 		.parent_index = MAX9485_CLKOUT,
240 		.enable_bit = MAX9485_CLKOUT2_ENABLE,
241 		.ops = {
242 			.prepare	= max9485_clk_prepare,
243 			.unprepare	= max9485_clk_unprepare,
244 		},
245 	},
246 };
247 
248 static struct clk_hw *
249 max9485_of_clk_get(struct of_phandle_args *clkspec, void *data)
250 {
251 	struct max9485_driver_data *drvdata = data;
252 	unsigned int idx = clkspec->args[0];
253 
254 	return &drvdata->hw[idx].hw;
255 }
256 
257 static int max9485_i2c_probe(struct i2c_client *client)
258 {
259 	struct max9485_driver_data *drvdata;
260 	struct device *dev = &client->dev;
261 	const char *xclk_name;
262 	int i, ret;
263 
264 	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
265 	if (!drvdata)
266 		return -ENOMEM;
267 
268 	drvdata->xclk = devm_clk_get(dev, "xclk");
269 	if (IS_ERR(drvdata->xclk))
270 		return PTR_ERR(drvdata->xclk);
271 
272 	xclk_name = __clk_get_name(drvdata->xclk);
273 
274 	drvdata->supply = devm_regulator_get(dev, "vdd");
275 	if (IS_ERR(drvdata->supply))
276 		return PTR_ERR(drvdata->supply);
277 
278 	ret = regulator_enable(drvdata->supply);
279 	if (ret < 0)
280 		return ret;
281 
282 	drvdata->reset_gpio =
283 		devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
284 	if (IS_ERR(drvdata->reset_gpio))
285 		return PTR_ERR(drvdata->reset_gpio);
286 
287 	i2c_set_clientdata(client, drvdata);
288 	drvdata->client = client;
289 
290 	ret = i2c_master_recv(drvdata->client, &drvdata->reg_value,
291 			      sizeof(drvdata->reg_value));
292 	if (ret < 0) {
293 		dev_warn(dev, "Unable to read device register: %d\n", ret);
294 		return ret;
295 	}
296 
297 	for (i = 0; i < MAX9485_NUM_CLKS; i++) {
298 		int parent_index = max9485_clks[i].parent_index;
299 		const char *name;
300 
301 		if (of_property_read_string_index(dev->of_node,
302 						  "clock-output-names",
303 						  i, &name) == 0) {
304 			drvdata->hw[i].init.name = name;
305 		} else {
306 			drvdata->hw[i].init.name = max9485_clks[i].name;
307 		}
308 
309 		drvdata->hw[i].init.ops = &max9485_clks[i].ops;
310 		drvdata->hw[i].init.num_parents = 1;
311 		drvdata->hw[i].init.flags = 0;
312 
313 		if (parent_index > 0) {
314 			drvdata->hw[i].init.parent_names =
315 				&drvdata->hw[parent_index].init.name;
316 			drvdata->hw[i].init.flags |= CLK_SET_RATE_PARENT;
317 		} else {
318 			drvdata->hw[i].init.parent_names = &xclk_name;
319 		}
320 
321 		drvdata->hw[i].enable_bit = max9485_clks[i].enable_bit;
322 		drvdata->hw[i].hw.init = &drvdata->hw[i].init;
323 		drvdata->hw[i].drvdata = drvdata;
324 
325 		ret = devm_clk_hw_register(dev, &drvdata->hw[i].hw);
326 		if (ret < 0)
327 			return ret;
328 	}
329 
330 	return devm_of_clk_add_hw_provider(dev, max9485_of_clk_get, drvdata);
331 }
332 
333 static int __maybe_unused max9485_suspend(struct device *dev)
334 {
335 	struct i2c_client *client = to_i2c_client(dev);
336 	struct max9485_driver_data *drvdata = i2c_get_clientdata(client);
337 
338 	gpiod_set_value_cansleep(drvdata->reset_gpio, 0);
339 
340 	return 0;
341 }
342 
343 static int __maybe_unused max9485_resume(struct device *dev)
344 {
345 	struct i2c_client *client = to_i2c_client(dev);
346 	struct max9485_driver_data *drvdata = i2c_get_clientdata(client);
347 	int ret;
348 
349 	gpiod_set_value_cansleep(drvdata->reset_gpio, 1);
350 
351 	ret = i2c_master_send(client, &drvdata->reg_value,
352 			      sizeof(drvdata->reg_value));
353 
354 	return ret < 0 ? ret : 0;
355 }
356 
357 static const struct dev_pm_ops max9485_pm_ops = {
358 	SET_SYSTEM_SLEEP_PM_OPS(max9485_suspend, max9485_resume)
359 };
360 
361 static const struct of_device_id max9485_dt_ids[] = {
362 	{ .compatible = "maxim,max9485", },
363 	{ }
364 };
365 MODULE_DEVICE_TABLE(of, max9485_dt_ids);
366 
367 static const struct i2c_device_id max9485_i2c_ids[] = {
368 	{ .name = "max9485", },
369 	{ }
370 };
371 MODULE_DEVICE_TABLE(i2c, max9485_i2c_ids);
372 
373 static struct i2c_driver max9485_driver = {
374 	.driver = {
375 		.name		= "max9485",
376 		.pm		= &max9485_pm_ops,
377 		.of_match_table	= max9485_dt_ids,
378 	},
379 	.probe = max9485_i2c_probe,
380 	.id_table = max9485_i2c_ids,
381 };
382 module_i2c_driver(max9485_driver);
383 
384 MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>");
385 MODULE_DESCRIPTION("MAX9485 Programmable Audio Clock Generator");
386 MODULE_LICENSE("GPL v2");
387