1 // SPDX-License-Identifier: GPL-2.0-or-later 2 // Copyright IBM Corp 3 // Copyright ASPEED Technology 4 5 #define pr_fmt(fmt) "clk-ast2600: " fmt 6 7 #include <linux/mfd/syscon.h> 8 #include <linux/of_address.h> 9 #include <linux/of_device.h> 10 #include <linux/platform_device.h> 11 #include <linux/regmap.h> 12 #include <linux/slab.h> 13 14 #include <dt-bindings/clock/ast2600-clock.h> 15 16 #include "clk-aspeed.h" 17 18 #define ASPEED_G6_NUM_CLKS 71 19 20 #define ASPEED_G6_SILICON_REV 0x014 21 #define CHIP_REVISION_ID GENMASK(23, 16) 22 23 #define ASPEED_G6_RESET_CTRL 0x040 24 #define ASPEED_G6_RESET_CTRL2 0x050 25 26 #define ASPEED_G6_CLK_STOP_CTRL 0x080 27 #define ASPEED_G6_CLK_STOP_CTRL2 0x090 28 29 #define ASPEED_G6_MISC_CTRL 0x0C0 30 #define UART_DIV13_EN BIT(12) 31 32 #define ASPEED_G6_CLK_SELECTION1 0x300 33 #define ASPEED_G6_CLK_SELECTION2 0x304 34 #define ASPEED_G6_CLK_SELECTION4 0x310 35 36 #define ASPEED_HPLL_PARAM 0x200 37 #define ASPEED_APLL_PARAM 0x210 38 #define ASPEED_MPLL_PARAM 0x220 39 #define ASPEED_EPLL_PARAM 0x240 40 #define ASPEED_DPLL_PARAM 0x260 41 42 #define ASPEED_G6_STRAP1 0x500 43 44 #define ASPEED_MAC12_CLK_DLY 0x340 45 #define ASPEED_MAC34_CLK_DLY 0x350 46 47 /* Globally visible clocks */ 48 static DEFINE_SPINLOCK(aspeed_g6_clk_lock); 49 50 /* Keeps track of all clocks */ 51 static struct clk_hw_onecell_data *aspeed_g6_clk_data; 52 53 static void __iomem *scu_g6_base; 54 /* AST2600 revision: A0, A1, A2, etc */ 55 static u8 soc_rev; 56 57 /* 58 * Clocks marked with CLK_IS_CRITICAL: 59 * 60 * ref0 and ref1 are essential for the SoC to operate 61 * mpll is required if SDRAM is used 62 */ 63 static const struct aspeed_gate_data aspeed_g6_gates[] = { 64 /* clk rst name parent flags */ 65 [ASPEED_CLK_GATE_MCLK] = { 0, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ 66 [ASPEED_CLK_GATE_ECLK] = { 1, 6, "eclk-gate", "eclk", 0 }, /* Video Engine */ 67 [ASPEED_CLK_GATE_GCLK] = { 2, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ 68 /* vclk parent - dclk/d1clk/hclk/mclk */ 69 [ASPEED_CLK_GATE_VCLK] = { 3, -1, "vclk-gate", NULL, 0 }, /* Video Capture */ 70 [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ 71 /* From dpll */ 72 [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, CLK_IS_CRITICAL }, /* DAC */ 73 [ASPEED_CLK_GATE_REF0CLK] = { 6, -1, "ref0clk-gate", "clkin", CLK_IS_CRITICAL }, 74 [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */ 75 /* Reserved 8 */ 76 [ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate", NULL, 0 }, /* USB1.1 (requires port 2 enabled) */ 77 /* From dpll/epll/40mhz usb p1 phy/gpioc6/dp phy pll */ 78 [ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate", "d1clk", 0 }, /* GFX CRT */ 79 /* Reserved 11/12 */ 80 [ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate", NULL, 0 }, /* HAC */ 81 [ASPEED_CLK_GATE_USBPORT1CLK] = { 14, 14, "usb-port1-gate", NULL, 0 }, /* USB2 hub/USB2 host port 1/USB1.1 dev */ 82 [ASPEED_CLK_GATE_UART5CLK] = { 15, -1, "uart5clk-gate", "uart", 0 }, /* UART5 */ 83 /* Reserved 16/19 */ 84 [ASPEED_CLK_GATE_MAC1CLK] = { 20, 11, "mac1clk-gate", "mac12", 0 }, /* MAC1 */ 85 [ASPEED_CLK_GATE_MAC2CLK] = { 21, 12, "mac2clk-gate", "mac12", 0 }, /* MAC2 */ 86 /* Reserved 22/23 */ 87 [ASPEED_CLK_GATE_RSACLK] = { 24, 4, "rsaclk-gate", NULL, 0 }, /* HAC */ 88 [ASPEED_CLK_GATE_RVASCLK] = { 25, 9, "rvasclk-gate", NULL, 0 }, /* RVAS */ 89 /* Reserved 26 */ 90 [ASPEED_CLK_GATE_EMMCCLK] = { 27, 16, "emmcclk-gate", NULL, 0 }, /* For card clk */ 91 /* Reserved 28/29/30 */ 92 [ASPEED_CLK_GATE_LCLK] = { 32, 32, "lclk-gate", NULL, 0 }, /* LPC */ 93 [ASPEED_CLK_GATE_ESPICLK] = { 33, -1, "espiclk-gate", NULL, 0 }, /* eSPI */ 94 [ASPEED_CLK_GATE_REF1CLK] = { 34, -1, "ref1clk-gate", "clkin", CLK_IS_CRITICAL }, 95 /* Reserved 35 */ 96 [ASPEED_CLK_GATE_SDCLK] = { 36, 56, "sdclk-gate", NULL, 0 }, /* SDIO/SD */ 97 [ASPEED_CLK_GATE_LHCCLK] = { 37, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */ 98 /* Reserved 38 RSA: no longer used */ 99 /* Reserved 39 */ 100 [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", NULL, 0 }, /* I3C0 */ 101 [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", NULL, 0 }, /* I3C1 */ 102 [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", NULL, 0 }, /* I3C2 */ 103 [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", NULL, 0 }, /* I3C3 */ 104 [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", NULL, 0 }, /* I3C4 */ 105 [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", NULL, 0 }, /* I3C5 */ 106 [ASPEED_CLK_GATE_I3C6CLK] = { 46, 46, "i3c6clk-gate", NULL, 0 }, /* I3C6 */ 107 [ASPEED_CLK_GATE_I3C7CLK] = { 47, 47, "i3c7clk-gate", NULL, 0 }, /* I3C7 */ 108 [ASPEED_CLK_GATE_UART1CLK] = { 48, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */ 109 [ASPEED_CLK_GATE_UART2CLK] = { 49, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */ 110 [ASPEED_CLK_GATE_UART3CLK] = { 50, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */ 111 [ASPEED_CLK_GATE_UART4CLK] = { 51, -1, "uart4clk-gate", "uart", 0 }, /* UART4 */ 112 [ASPEED_CLK_GATE_MAC3CLK] = { 52, 52, "mac3clk-gate", "mac34", 0 }, /* MAC3 */ 113 [ASPEED_CLK_GATE_MAC4CLK] = { 53, 53, "mac4clk-gate", "mac34", 0 }, /* MAC4 */ 114 [ASPEED_CLK_GATE_UART6CLK] = { 54, -1, "uart6clk-gate", "uartx", 0 }, /* UART6 */ 115 [ASPEED_CLK_GATE_UART7CLK] = { 55, -1, "uart7clk-gate", "uartx", 0 }, /* UART7 */ 116 [ASPEED_CLK_GATE_UART8CLK] = { 56, -1, "uart8clk-gate", "uartx", 0 }, /* UART8 */ 117 [ASPEED_CLK_GATE_UART9CLK] = { 57, -1, "uart9clk-gate", "uartx", 0 }, /* UART9 */ 118 [ASPEED_CLK_GATE_UART10CLK] = { 58, -1, "uart10clk-gate", "uartx", 0 }, /* UART10 */ 119 [ASPEED_CLK_GATE_UART11CLK] = { 59, -1, "uart11clk-gate", "uartx", 0 }, /* UART11 */ 120 [ASPEED_CLK_GATE_UART12CLK] = { 60, -1, "uart12clk-gate", "uartx", 0 }, /* UART12 */ 121 [ASPEED_CLK_GATE_UART13CLK] = { 61, -1, "uart13clk-gate", "uartx", 0 }, /* UART13 */ 122 [ASPEED_CLK_GATE_FSICLK] = { 62, 59, "fsiclk-gate", NULL, 0 }, /* FSI */ 123 }; 124 125 static const struct clk_div_table ast2600_eclk_div_table[] = { 126 { 0x0, 2 }, 127 { 0x1, 2 }, 128 { 0x2, 3 }, 129 { 0x3, 4 }, 130 { 0x4, 5 }, 131 { 0x5, 6 }, 132 { 0x6, 7 }, 133 { 0x7, 8 }, 134 { 0 } 135 }; 136 137 static const struct clk_div_table ast2600_emmc_extclk_div_table[] = { 138 { 0x0, 2 }, 139 { 0x1, 4 }, 140 { 0x2, 6 }, 141 { 0x3, 8 }, 142 { 0x4, 10 }, 143 { 0x5, 12 }, 144 { 0x6, 14 }, 145 { 0x7, 16 }, 146 { 0 } 147 }; 148 149 static const struct clk_div_table ast2600_mac_div_table[] = { 150 { 0x0, 4 }, 151 { 0x1, 4 }, 152 { 0x2, 6 }, 153 { 0x3, 8 }, 154 { 0x4, 10 }, 155 { 0x5, 12 }, 156 { 0x6, 14 }, 157 { 0x7, 16 }, 158 { 0 } 159 }; 160 161 static const struct clk_div_table ast2600_div_table[] = { 162 { 0x0, 4 }, 163 { 0x1, 8 }, 164 { 0x2, 12 }, 165 { 0x3, 16 }, 166 { 0x4, 20 }, 167 { 0x5, 24 }, 168 { 0x6, 28 }, 169 { 0x7, 32 }, 170 { 0 } 171 }; 172 173 /* For hpll/dpll/epll/mpll */ 174 static struct clk_hw *ast2600_calc_pll(const char *name, u32 val) 175 { 176 unsigned int mult, div; 177 178 if (val & BIT(24)) { 179 /* Pass through mode */ 180 mult = div = 1; 181 } else { 182 /* F = 25Mhz * [(M + 2) / (n + 1)] / (p + 1) */ 183 u32 m = val & 0x1fff; 184 u32 n = (val >> 13) & 0x3f; 185 u32 p = (val >> 19) & 0xf; 186 mult = (m + 1) / (n + 1); 187 div = (p + 1); 188 } 189 return clk_hw_register_fixed_factor(NULL, name, "clkin", 0, 190 mult, div); 191 }; 192 193 static struct clk_hw *ast2600_calc_apll(const char *name, u32 val) 194 { 195 unsigned int mult, div; 196 197 if (soc_rev >= 2) { 198 if (val & BIT(24)) { 199 /* Pass through mode */ 200 mult = div = 1; 201 } else { 202 /* F = 25Mhz * [(m + 1) / (n + 1)] / (p + 1) */ 203 u32 m = val & 0x1fff; 204 u32 n = (val >> 13) & 0x3f; 205 u32 p = (val >> 19) & 0xf; 206 207 mult = (m + 1); 208 div = (n + 1) * (p + 1); 209 } 210 } else { 211 if (val & BIT(20)) { 212 /* Pass through mode */ 213 mult = div = 1; 214 } else { 215 /* F = 25Mhz * (2-od) * [(m + 2) / (n + 1)] */ 216 u32 m = (val >> 5) & 0x3f; 217 u32 od = (val >> 4) & 0x1; 218 u32 n = val & 0xf; 219 220 mult = (2 - od) * (m + 2); 221 div = n + 1; 222 } 223 } 224 return clk_hw_register_fixed_factor(NULL, name, "clkin", 0, 225 mult, div); 226 }; 227 228 static u32 get_bit(u8 idx) 229 { 230 return BIT(idx % 32); 231 } 232 233 static u32 get_reset_reg(struct aspeed_clk_gate *gate) 234 { 235 if (gate->reset_idx < 32) 236 return ASPEED_G6_RESET_CTRL; 237 238 return ASPEED_G6_RESET_CTRL2; 239 } 240 241 static u32 get_clock_reg(struct aspeed_clk_gate *gate) 242 { 243 if (gate->clock_idx < 32) 244 return ASPEED_G6_CLK_STOP_CTRL; 245 246 return ASPEED_G6_CLK_STOP_CTRL2; 247 } 248 249 static int aspeed_g6_clk_is_enabled(struct clk_hw *hw) 250 { 251 struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); 252 u32 clk = get_bit(gate->clock_idx); 253 u32 rst = get_bit(gate->reset_idx); 254 u32 reg; 255 u32 enval; 256 257 /* 258 * If the IP is in reset, treat the clock as not enabled, 259 * this happens with some clocks such as the USB one when 260 * coming from cold reset. Without this, aspeed_clk_enable() 261 * will fail to lift the reset. 262 */ 263 if (gate->reset_idx >= 0) { 264 regmap_read(gate->map, get_reset_reg(gate), ®); 265 266 if (reg & rst) 267 return 0; 268 } 269 270 regmap_read(gate->map, get_clock_reg(gate), ®); 271 272 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk; 273 274 return ((reg & clk) == enval) ? 1 : 0; 275 } 276 277 static int aspeed_g6_clk_enable(struct clk_hw *hw) 278 { 279 struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); 280 unsigned long flags; 281 u32 clk = get_bit(gate->clock_idx); 282 u32 rst = get_bit(gate->reset_idx); 283 284 spin_lock_irqsave(gate->lock, flags); 285 286 if (aspeed_g6_clk_is_enabled(hw)) { 287 spin_unlock_irqrestore(gate->lock, flags); 288 return 0; 289 } 290 291 if (gate->reset_idx >= 0) { 292 /* Put IP in reset */ 293 regmap_write(gate->map, get_reset_reg(gate), rst); 294 /* Delay 100us */ 295 udelay(100); 296 } 297 298 /* Enable clock */ 299 if (gate->flags & CLK_GATE_SET_TO_DISABLE) { 300 /* Clock is clear to enable, so use set to clear register */ 301 regmap_write(gate->map, get_clock_reg(gate) + 0x04, clk); 302 } else { 303 /* Clock is set to enable, so use write to set register */ 304 regmap_write(gate->map, get_clock_reg(gate), clk); 305 } 306 307 if (gate->reset_idx >= 0) { 308 /* A delay of 10ms is specified by the ASPEED docs */ 309 mdelay(10); 310 /* Take IP out of reset */ 311 regmap_write(gate->map, get_reset_reg(gate) + 0x4, rst); 312 } 313 314 spin_unlock_irqrestore(gate->lock, flags); 315 316 return 0; 317 } 318 319 static void aspeed_g6_clk_disable(struct clk_hw *hw) 320 { 321 struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); 322 unsigned long flags; 323 u32 clk = get_bit(gate->clock_idx); 324 325 spin_lock_irqsave(gate->lock, flags); 326 327 if (gate->flags & CLK_GATE_SET_TO_DISABLE) { 328 regmap_write(gate->map, get_clock_reg(gate), clk); 329 } else { 330 /* Use set to clear register */ 331 regmap_write(gate->map, get_clock_reg(gate) + 0x4, clk); 332 } 333 334 spin_unlock_irqrestore(gate->lock, flags); 335 } 336 337 static const struct clk_ops aspeed_g6_clk_gate_ops = { 338 .enable = aspeed_g6_clk_enable, 339 .disable = aspeed_g6_clk_disable, 340 .is_enabled = aspeed_g6_clk_is_enabled, 341 }; 342 343 static int aspeed_g6_reset_deassert(struct reset_controller_dev *rcdev, 344 unsigned long id) 345 { 346 struct aspeed_reset *ar = to_aspeed_reset(rcdev); 347 u32 rst = get_bit(id); 348 u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL; 349 350 /* Use set to clear register */ 351 return regmap_write(ar->map, reg + 0x04, rst); 352 } 353 354 static int aspeed_g6_reset_assert(struct reset_controller_dev *rcdev, 355 unsigned long id) 356 { 357 struct aspeed_reset *ar = to_aspeed_reset(rcdev); 358 u32 rst = get_bit(id); 359 u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL; 360 361 return regmap_write(ar->map, reg, rst); 362 } 363 364 static int aspeed_g6_reset_status(struct reset_controller_dev *rcdev, 365 unsigned long id) 366 { 367 struct aspeed_reset *ar = to_aspeed_reset(rcdev); 368 int ret; 369 u32 val; 370 u32 rst = get_bit(id); 371 u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL; 372 373 ret = regmap_read(ar->map, reg, &val); 374 if (ret) 375 return ret; 376 377 return !!(val & rst); 378 } 379 380 static const struct reset_control_ops aspeed_g6_reset_ops = { 381 .assert = aspeed_g6_reset_assert, 382 .deassert = aspeed_g6_reset_deassert, 383 .status = aspeed_g6_reset_status, 384 }; 385 386 static struct clk_hw *aspeed_g6_clk_hw_register_gate(struct device *dev, 387 const char *name, const char *parent_name, unsigned long flags, 388 struct regmap *map, u8 clock_idx, u8 reset_idx, 389 u8 clk_gate_flags, spinlock_t *lock) 390 { 391 struct aspeed_clk_gate *gate; 392 struct clk_init_data init; 393 struct clk_hw *hw; 394 int ret; 395 396 gate = kzalloc(sizeof(*gate), GFP_KERNEL); 397 if (!gate) 398 return ERR_PTR(-ENOMEM); 399 400 init.name = name; 401 init.ops = &aspeed_g6_clk_gate_ops; 402 init.flags = flags; 403 init.parent_names = parent_name ? &parent_name : NULL; 404 init.num_parents = parent_name ? 1 : 0; 405 406 gate->map = map; 407 gate->clock_idx = clock_idx; 408 gate->reset_idx = reset_idx; 409 gate->flags = clk_gate_flags; 410 gate->lock = lock; 411 gate->hw.init = &init; 412 413 hw = &gate->hw; 414 ret = clk_hw_register(dev, hw); 415 if (ret) { 416 kfree(gate); 417 hw = ERR_PTR(ret); 418 } 419 420 return hw; 421 } 422 423 static const char *const emmc_extclk_parent_names[] = { 424 "emmc_extclk_hpll_in", 425 "mpll", 426 }; 427 428 static const char * const vclk_parent_names[] = { 429 "dpll", 430 "d1pll", 431 "hclk", 432 "mclk", 433 }; 434 435 static const char * const d1clk_parent_names[] = { 436 "dpll", 437 "epll", 438 "usb-phy-40m", 439 "gpioc6_clkin", 440 "dp_phy_pll", 441 }; 442 443 static int aspeed_g6_clk_probe(struct platform_device *pdev) 444 { 445 struct device *dev = &pdev->dev; 446 struct aspeed_reset *ar; 447 struct regmap *map; 448 struct clk_hw *hw; 449 u32 val, rate; 450 int i, ret; 451 452 map = syscon_node_to_regmap(dev->of_node); 453 if (IS_ERR(map)) { 454 dev_err(dev, "no syscon regmap\n"); 455 return PTR_ERR(map); 456 } 457 458 ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL); 459 if (!ar) 460 return -ENOMEM; 461 462 ar->map = map; 463 464 ar->rcdev.owner = THIS_MODULE; 465 ar->rcdev.nr_resets = 64; 466 ar->rcdev.ops = &aspeed_g6_reset_ops; 467 ar->rcdev.of_node = dev->of_node; 468 469 ret = devm_reset_controller_register(dev, &ar->rcdev); 470 if (ret) { 471 dev_err(dev, "could not register reset controller\n"); 472 return ret; 473 } 474 475 /* UART clock div13 setting */ 476 regmap_read(map, ASPEED_G6_MISC_CTRL, &val); 477 if (val & UART_DIV13_EN) 478 rate = 24000000 / 13; 479 else 480 rate = 24000000; 481 hw = clk_hw_register_fixed_rate(dev, "uart", NULL, 0, rate); 482 if (IS_ERR(hw)) 483 return PTR_ERR(hw); 484 aspeed_g6_clk_data->hws[ASPEED_CLK_UART] = hw; 485 486 /* UART6~13 clock div13 setting */ 487 regmap_read(map, 0x80, &val); 488 if (val & BIT(31)) 489 rate = 24000000 / 13; 490 else 491 rate = 24000000; 492 hw = clk_hw_register_fixed_rate(dev, "uartx", NULL, 0, rate); 493 if (IS_ERR(hw)) 494 return PTR_ERR(hw); 495 aspeed_g6_clk_data->hws[ASPEED_CLK_UARTX] = hw; 496 497 /* EMMC ext clock */ 498 hw = clk_hw_register_fixed_factor(dev, "emmc_extclk_hpll_in", "hpll", 499 0, 1, 2); 500 if (IS_ERR(hw)) 501 return PTR_ERR(hw); 502 503 hw = clk_hw_register_mux(dev, "emmc_extclk_mux", 504 emmc_extclk_parent_names, 505 ARRAY_SIZE(emmc_extclk_parent_names), 0, 506 scu_g6_base + ASPEED_G6_CLK_SELECTION1, 11, 1, 507 0, &aspeed_g6_clk_lock); 508 if (IS_ERR(hw)) 509 return PTR_ERR(hw); 510 511 hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "emmc_extclk_mux", 512 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, 513 15, 0, &aspeed_g6_clk_lock); 514 if (IS_ERR(hw)) 515 return PTR_ERR(hw); 516 517 hw = clk_hw_register_divider_table(dev, "emmc_extclk", 518 "emmc_extclk_gate", 0, 519 scu_g6_base + 520 ASPEED_G6_CLK_SELECTION1, 12, 521 3, 0, ast2600_emmc_extclk_div_table, 522 &aspeed_g6_clk_lock); 523 if (IS_ERR(hw)) 524 return PTR_ERR(hw); 525 aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw; 526 527 /* SD/SDIO clock divider and gate */ 528 hw = clk_hw_register_gate(dev, "sd_extclk_gate", "hpll", 0, 529 scu_g6_base + ASPEED_G6_CLK_SELECTION4, 31, 0, 530 &aspeed_g6_clk_lock); 531 if (IS_ERR(hw)) 532 return PTR_ERR(hw); 533 hw = clk_hw_register_divider_table(dev, "sd_extclk", "sd_extclk_gate", 534 0, scu_g6_base + ASPEED_G6_CLK_SELECTION4, 28, 3, 0, 535 ast2600_div_table, 536 &aspeed_g6_clk_lock); 537 if (IS_ERR(hw)) 538 return PTR_ERR(hw); 539 aspeed_g6_clk_data->hws[ASPEED_CLK_SDIO] = hw; 540 541 /* MAC1/2 RMII 50MHz RCLK */ 542 hw = clk_hw_register_fixed_rate(dev, "mac12rclk", "hpll", 0, 50000000); 543 if (IS_ERR(hw)) 544 return PTR_ERR(hw); 545 546 /* MAC1/2 AHB bus clock divider */ 547 hw = clk_hw_register_divider_table(dev, "mac12", "hpll", 0, 548 scu_g6_base + ASPEED_G6_CLK_SELECTION1, 16, 3, 0, 549 ast2600_mac_div_table, 550 &aspeed_g6_clk_lock); 551 if (IS_ERR(hw)) 552 return PTR_ERR(hw); 553 aspeed_g6_clk_data->hws[ASPEED_CLK_MAC12] = hw; 554 555 /* RMII1 50MHz (RCLK) output enable */ 556 hw = clk_hw_register_gate(dev, "mac1rclk", "mac12rclk", 0, 557 scu_g6_base + ASPEED_MAC12_CLK_DLY, 29, 0, 558 &aspeed_g6_clk_lock); 559 if (IS_ERR(hw)) 560 return PTR_ERR(hw); 561 aspeed_g6_clk_data->hws[ASPEED_CLK_MAC1RCLK] = hw; 562 563 /* RMII2 50MHz (RCLK) output enable */ 564 hw = clk_hw_register_gate(dev, "mac2rclk", "mac12rclk", 0, 565 scu_g6_base + ASPEED_MAC12_CLK_DLY, 30, 0, 566 &aspeed_g6_clk_lock); 567 if (IS_ERR(hw)) 568 return PTR_ERR(hw); 569 aspeed_g6_clk_data->hws[ASPEED_CLK_MAC2RCLK] = hw; 570 571 /* MAC1/2 RMII 50MHz RCLK */ 572 hw = clk_hw_register_fixed_rate(dev, "mac34rclk", "hclk", 0, 50000000); 573 if (IS_ERR(hw)) 574 return PTR_ERR(hw); 575 576 /* MAC3/4 AHB bus clock divider */ 577 hw = clk_hw_register_divider_table(dev, "mac34", "hpll", 0, 578 scu_g6_base + 0x310, 24, 3, 0, 579 ast2600_mac_div_table, 580 &aspeed_g6_clk_lock); 581 if (IS_ERR(hw)) 582 return PTR_ERR(hw); 583 aspeed_g6_clk_data->hws[ASPEED_CLK_MAC34] = hw; 584 585 /* RMII3 50MHz (RCLK) output enable */ 586 hw = clk_hw_register_gate(dev, "mac3rclk", "mac34rclk", 0, 587 scu_g6_base + ASPEED_MAC34_CLK_DLY, 29, 0, 588 &aspeed_g6_clk_lock); 589 if (IS_ERR(hw)) 590 return PTR_ERR(hw); 591 aspeed_g6_clk_data->hws[ASPEED_CLK_MAC3RCLK] = hw; 592 593 /* RMII4 50MHz (RCLK) output enable */ 594 hw = clk_hw_register_gate(dev, "mac4rclk", "mac34rclk", 0, 595 scu_g6_base + ASPEED_MAC34_CLK_DLY, 30, 0, 596 &aspeed_g6_clk_lock); 597 if (IS_ERR(hw)) 598 return PTR_ERR(hw); 599 aspeed_g6_clk_data->hws[ASPEED_CLK_MAC4RCLK] = hw; 600 601 /* LPC Host (LHCLK) clock divider */ 602 hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0, 603 scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0, 604 ast2600_div_table, 605 &aspeed_g6_clk_lock); 606 if (IS_ERR(hw)) 607 return PTR_ERR(hw); 608 aspeed_g6_clk_data->hws[ASPEED_CLK_LHCLK] = hw; 609 610 /* gfx d1clk : use dp clk */ 611 regmap_update_bits(map, ASPEED_G6_CLK_SELECTION1, GENMASK(10, 8), BIT(10)); 612 /* SoC Display clock selection */ 613 hw = clk_hw_register_mux(dev, "d1clk", d1clk_parent_names, 614 ARRAY_SIZE(d1clk_parent_names), 0, 615 scu_g6_base + ASPEED_G6_CLK_SELECTION1, 8, 3, 0, 616 &aspeed_g6_clk_lock); 617 if (IS_ERR(hw)) 618 return PTR_ERR(hw); 619 aspeed_g6_clk_data->hws[ASPEED_CLK_D1CLK] = hw; 620 621 /* d1 clk div 0x308[17:15] x [14:12] - 8,7,6,5,4,3,2,1 */ 622 regmap_write(map, 0x308, 0x12000); /* 3x3 = 9 */ 623 624 /* P-Bus (BCLK) clock divider */ 625 hw = clk_hw_register_divider_table(dev, "bclk", "epll", 0, 626 scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0, 627 ast2600_div_table, 628 &aspeed_g6_clk_lock); 629 if (IS_ERR(hw)) 630 return PTR_ERR(hw); 631 aspeed_g6_clk_data->hws[ASPEED_CLK_BCLK] = hw; 632 633 /* Video Capture clock selection */ 634 hw = clk_hw_register_mux(dev, "vclk", vclk_parent_names, 635 ARRAY_SIZE(vclk_parent_names), 0, 636 scu_g6_base + ASPEED_G6_CLK_SELECTION2, 12, 3, 0, 637 &aspeed_g6_clk_lock); 638 if (IS_ERR(hw)) 639 return PTR_ERR(hw); 640 aspeed_g6_clk_data->hws[ASPEED_CLK_VCLK] = hw; 641 642 /* Video Engine clock divider */ 643 hw = clk_hw_register_divider_table(dev, "eclk", NULL, 0, 644 scu_g6_base + ASPEED_G6_CLK_SELECTION1, 28, 3, 0, 645 ast2600_eclk_div_table, 646 &aspeed_g6_clk_lock); 647 if (IS_ERR(hw)) 648 return PTR_ERR(hw); 649 aspeed_g6_clk_data->hws[ASPEED_CLK_ECLK] = hw; 650 651 for (i = 0; i < ARRAY_SIZE(aspeed_g6_gates); i++) { 652 const struct aspeed_gate_data *gd = &aspeed_g6_gates[i]; 653 u32 gate_flags; 654 655 /* 656 * Special case: the USB port 1 clock (bit 14) is always 657 * working the opposite way from the other ones. 658 */ 659 gate_flags = (gd->clock_idx == 14) ? 0 : CLK_GATE_SET_TO_DISABLE; 660 hw = aspeed_g6_clk_hw_register_gate(dev, 661 gd->name, 662 gd->parent_name, 663 gd->flags, 664 map, 665 gd->clock_idx, 666 gd->reset_idx, 667 gate_flags, 668 &aspeed_g6_clk_lock); 669 if (IS_ERR(hw)) 670 return PTR_ERR(hw); 671 aspeed_g6_clk_data->hws[i] = hw; 672 } 673 674 return 0; 675 }; 676 677 static const struct of_device_id aspeed_g6_clk_dt_ids[] = { 678 { .compatible = "aspeed,ast2600-scu" }, 679 { } 680 }; 681 682 static struct platform_driver aspeed_g6_clk_driver = { 683 .probe = aspeed_g6_clk_probe, 684 .driver = { 685 .name = "ast2600-clk", 686 .of_match_table = aspeed_g6_clk_dt_ids, 687 .suppress_bind_attrs = true, 688 }, 689 }; 690 builtin_platform_driver(aspeed_g6_clk_driver); 691 692 static const u32 ast2600_a0_axi_ahb_div_table[] = { 693 2, 2, 3, 5, 694 }; 695 696 static const u32 ast2600_a1_axi_ahb_div0_tbl[] = { 697 3, 2, 3, 4, 698 }; 699 700 static const u32 ast2600_a1_axi_ahb_div1_tbl[] = { 701 3, 4, 6, 8, 702 }; 703 704 static const u32 ast2600_a1_axi_ahb200_tbl[] = { 705 3, 4, 3, 4, 2, 2, 2, 2, 706 }; 707 708 static void __init aspeed_g6_cc(struct regmap *map) 709 { 710 struct clk_hw *hw; 711 u32 val, div, divbits, axi_div, ahb_div; 712 713 clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000); 714 715 /* 716 * High-speed PLL clock derived from the crystal. This the CPU clock, 717 * and we assume that it is enabled 718 */ 719 regmap_read(map, ASPEED_HPLL_PARAM, &val); 720 aspeed_g6_clk_data->hws[ASPEED_CLK_HPLL] = ast2600_calc_pll("hpll", val); 721 722 regmap_read(map, ASPEED_MPLL_PARAM, &val); 723 aspeed_g6_clk_data->hws[ASPEED_CLK_MPLL] = ast2600_calc_pll("mpll", val); 724 725 regmap_read(map, ASPEED_DPLL_PARAM, &val); 726 aspeed_g6_clk_data->hws[ASPEED_CLK_DPLL] = ast2600_calc_pll("dpll", val); 727 728 regmap_read(map, ASPEED_EPLL_PARAM, &val); 729 aspeed_g6_clk_data->hws[ASPEED_CLK_EPLL] = ast2600_calc_pll("epll", val); 730 731 regmap_read(map, ASPEED_APLL_PARAM, &val); 732 aspeed_g6_clk_data->hws[ASPEED_CLK_APLL] = ast2600_calc_apll("apll", val); 733 734 /* Strap bits 12:11 define the AXI/AHB clock frequency ratio (aka HCLK)*/ 735 regmap_read(map, ASPEED_G6_STRAP1, &val); 736 if (val & BIT(16)) 737 axi_div = 1; 738 else 739 axi_div = 2; 740 741 divbits = (val >> 11) & 0x3; 742 if (soc_rev >= 1) { 743 if (!divbits) { 744 ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3]; 745 if (val & BIT(16)) 746 ahb_div *= 2; 747 } else { 748 if (val & BIT(16)) 749 ahb_div = ast2600_a1_axi_ahb_div1_tbl[divbits]; 750 else 751 ahb_div = ast2600_a1_axi_ahb_div0_tbl[divbits]; 752 } 753 } else { 754 ahb_div = ast2600_a0_axi_ahb_div_table[(val >> 11) & 0x3]; 755 } 756 757 hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, axi_div * ahb_div); 758 aspeed_g6_clk_data->hws[ASPEED_CLK_AHB] = hw; 759 760 regmap_read(map, ASPEED_G6_CLK_SELECTION1, &val); 761 val = (val >> 23) & 0x7; 762 div = 4 * (val + 1); 763 hw = clk_hw_register_fixed_factor(NULL, "apb1", "hpll", 0, 1, div); 764 aspeed_g6_clk_data->hws[ASPEED_CLK_APB1] = hw; 765 766 regmap_read(map, ASPEED_G6_CLK_SELECTION4, &val); 767 val = (val >> 9) & 0x7; 768 div = 2 * (val + 1); 769 hw = clk_hw_register_fixed_factor(NULL, "apb2", "ahb", 0, 1, div); 770 aspeed_g6_clk_data->hws[ASPEED_CLK_APB2] = hw; 771 772 /* USB 2.0 port1 phy 40MHz clock */ 773 hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000); 774 aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw; 775 }; 776 777 static void __init aspeed_g6_cc_init(struct device_node *np) 778 { 779 struct regmap *map; 780 int ret; 781 int i; 782 783 scu_g6_base = of_iomap(np, 0); 784 if (!scu_g6_base) 785 return; 786 787 soc_rev = (readl(scu_g6_base + ASPEED_G6_SILICON_REV) & CHIP_REVISION_ID) >> 16; 788 789 aspeed_g6_clk_data = kzalloc(struct_size(aspeed_g6_clk_data, hws, 790 ASPEED_G6_NUM_CLKS), GFP_KERNEL); 791 if (!aspeed_g6_clk_data) 792 return; 793 794 /* 795 * This way all clocks fetched before the platform device probes, 796 * except those we assign here for early use, will be deferred. 797 */ 798 for (i = 0; i < ASPEED_G6_NUM_CLKS; i++) 799 aspeed_g6_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER); 800 801 /* 802 * We check that the regmap works on this very first access, 803 * but as this is an MMIO-backed regmap, subsequent regmap 804 * access is not going to fail and we skip error checks from 805 * this point. 806 */ 807 map = syscon_node_to_regmap(np); 808 if (IS_ERR(map)) { 809 pr_err("no syscon regmap\n"); 810 return; 811 } 812 813 aspeed_g6_cc(map); 814 aspeed_g6_clk_data->num = ASPEED_G6_NUM_CLKS; 815 ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_g6_clk_data); 816 if (ret) 817 pr_err("failed to add DT provider: %d\n", ret); 818 }; 819 CLK_OF_DECLARE_DRIVER(aspeed_cc_g6, "aspeed,ast2600-scu", aspeed_g6_cc_init); 820