1 // SPDX-License-Identifier: GPL-2.0+ 2 3 #define pr_fmt(fmt) "clk-aspeed: " fmt 4 5 #include <linux/clk-provider.h> 6 #include <linux/mfd/syscon.h> 7 #include <linux/of_address.h> 8 #include <linux/of_device.h> 9 #include <linux/platform_device.h> 10 #include <linux/regmap.h> 11 #include <linux/reset-controller.h> 12 #include <linux/slab.h> 13 #include <linux/spinlock.h> 14 15 #include <dt-bindings/clock/aspeed-clock.h> 16 17 #define ASPEED_NUM_CLKS 35 18 19 #define ASPEED_RESET_CTRL 0x04 20 #define ASPEED_CLK_SELECTION 0x08 21 #define ASPEED_CLK_STOP_CTRL 0x0c 22 #define ASPEED_MPLL_PARAM 0x20 23 #define ASPEED_HPLL_PARAM 0x24 24 #define AST2500_HPLL_BYPASS_EN BIT(20) 25 #define AST2400_HPLL_STRAPPED BIT(18) 26 #define AST2400_HPLL_BYPASS_EN BIT(17) 27 #define ASPEED_MISC_CTRL 0x2c 28 #define UART_DIV13_EN BIT(12) 29 #define ASPEED_STRAP 0x70 30 #define CLKIN_25MHZ_EN BIT(23) 31 #define AST2400_CLK_SOURCE_SEL BIT(18) 32 #define ASPEED_CLK_SELECTION_2 0xd8 33 34 /* Globally visible clocks */ 35 static DEFINE_SPINLOCK(aspeed_clk_lock); 36 37 /* Keeps track of all clocks */ 38 static struct clk_hw_onecell_data *aspeed_clk_data; 39 40 static void __iomem *scu_base; 41 42 /** 43 * struct aspeed_gate_data - Aspeed gated clocks 44 * @clock_idx: bit used to gate this clock in the clock register 45 * @reset_idx: bit used to reset this IP in the reset register. -1 if no 46 * reset is required when enabling the clock 47 * @name: the clock name 48 * @parent_name: the name of the parent clock 49 * @flags: standard clock framework flags 50 */ 51 struct aspeed_gate_data { 52 u8 clock_idx; 53 s8 reset_idx; 54 const char *name; 55 const char *parent_name; 56 unsigned long flags; 57 }; 58 59 /** 60 * struct aspeed_clk_gate - Aspeed specific clk_gate structure 61 * @hw: handle between common and hardware-specific interfaces 62 * @reg: register controlling gate 63 * @clock_idx: bit used to gate this clock in the clock register 64 * @reset_idx: bit used to reset this IP in the reset register. -1 if no 65 * reset is required when enabling the clock 66 * @flags: hardware-specific flags 67 * @lock: register lock 68 * 69 * Some of the clocks in the Aspeed SoC must be put in reset before enabling. 70 * This modified version of clk_gate allows an optional reset bit to be 71 * specified. 72 */ 73 struct aspeed_clk_gate { 74 struct clk_hw hw; 75 struct regmap *map; 76 u8 clock_idx; 77 s8 reset_idx; 78 u8 flags; 79 spinlock_t *lock; 80 }; 81 82 #define to_aspeed_clk_gate(_hw) container_of(_hw, struct aspeed_clk_gate, hw) 83 84 /* TODO: ask Aspeed about the actual parent data */ 85 static const struct aspeed_gate_data aspeed_gates[] = { 86 /* clk rst name parent flags */ 87 [ASPEED_CLK_GATE_ECLK] = { 0, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */ 88 [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ 89 [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ 90 [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ 91 [ASPEED_CLK_GATE_BCLK] = { 4, 10, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ 92 [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, 0 }, /* DAC */ 93 [ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate", "clkin", CLK_IS_CRITICAL }, 94 [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */ 95 [ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate", NULL, 0 }, /* LPC */ 96 [ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate", NULL, 0 }, /* USB1.1 (requires port 2 enabled) */ 97 [ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate", NULL, 0 }, /* GFX CRT */ 98 [ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate", NULL, 0 }, /* HAC */ 99 [ASPEED_CLK_GATE_USBPORT1CLK] = { 14, 14, "usb-port1-gate", NULL, 0 }, /* USB2 hub/USB2 host port 1/USB1.1 dev */ 100 [ASPEED_CLK_GATE_UART1CLK] = { 15, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */ 101 [ASPEED_CLK_GATE_UART2CLK] = { 16, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */ 102 [ASPEED_CLK_GATE_UART5CLK] = { 17, -1, "uart5clk-gate", "uart", 0 }, /* UART5 */ 103 [ASPEED_CLK_GATE_ESPICLK] = { 19, -1, "espiclk-gate", NULL, 0 }, /* eSPI */ 104 [ASPEED_CLK_GATE_MAC1CLK] = { 20, 11, "mac1clk-gate", "mac", 0 }, /* MAC1 */ 105 [ASPEED_CLK_GATE_MAC2CLK] = { 21, 12, "mac2clk-gate", "mac", 0 }, /* MAC2 */ 106 [ASPEED_CLK_GATE_RSACLK] = { 24, -1, "rsaclk-gate", NULL, 0 }, /* RSA */ 107 [ASPEED_CLK_GATE_UART3CLK] = { 25, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */ 108 [ASPEED_CLK_GATE_UART4CLK] = { 26, -1, "uart4clk-gate", "uart", 0 }, /* UART4 */ 109 [ASPEED_CLK_GATE_SDCLKCLK] = { 27, 16, "sdclk-gate", NULL, 0 }, /* SDIO/SD */ 110 [ASPEED_CLK_GATE_LHCCLK] = { 28, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */ 111 }; 112 113 static const struct clk_div_table ast2500_mac_div_table[] = { 114 { 0x0, 4 }, /* Yep, really. Aspeed confirmed this is correct */ 115 { 0x1, 4 }, 116 { 0x2, 6 }, 117 { 0x3, 8 }, 118 { 0x4, 10 }, 119 { 0x5, 12 }, 120 { 0x6, 14 }, 121 { 0x7, 16 }, 122 { 0 } 123 }; 124 125 static const struct clk_div_table ast2400_div_table[] = { 126 { 0x0, 2 }, 127 { 0x1, 4 }, 128 { 0x2, 6 }, 129 { 0x3, 8 }, 130 { 0x4, 10 }, 131 { 0x5, 12 }, 132 { 0x6, 14 }, 133 { 0x7, 16 }, 134 { 0 } 135 }; 136 137 static const struct clk_div_table ast2500_div_table[] = { 138 { 0x0, 4 }, 139 { 0x1, 8 }, 140 { 0x2, 12 }, 141 { 0x3, 16 }, 142 { 0x4, 20 }, 143 { 0x5, 24 }, 144 { 0x6, 28 }, 145 { 0x7, 32 }, 146 { 0 } 147 }; 148 149 static struct clk_hw *aspeed_ast2400_calc_pll(const char *name, u32 val) 150 { 151 unsigned int mult, div; 152 153 if (val & AST2400_HPLL_BYPASS_EN) { 154 /* Pass through mode */ 155 mult = div = 1; 156 } else { 157 /* F = 24Mhz * (2-OD) * [(N + 2) / (D + 1)] */ 158 u32 n = (val >> 5) & 0x3f; 159 u32 od = (val >> 4) & 0x1; 160 u32 d = val & 0xf; 161 162 mult = (2 - od) * (n + 2); 163 div = d + 1; 164 } 165 return clk_hw_register_fixed_factor(NULL, name, "clkin", 0, 166 mult, div); 167 }; 168 169 static struct clk_hw *aspeed_ast2500_calc_pll(const char *name, u32 val) 170 { 171 unsigned int mult, div; 172 173 if (val & AST2500_HPLL_BYPASS_EN) { 174 /* Pass through mode */ 175 mult = div = 1; 176 } else { 177 /* F = clkin * [(M+1) / (N+1)] / (P + 1) */ 178 u32 p = (val >> 13) & 0x3f; 179 u32 m = (val >> 5) & 0xff; 180 u32 n = val & 0x1f; 181 182 mult = (m + 1) / (n + 1); 183 div = p + 1; 184 } 185 186 return clk_hw_register_fixed_factor(NULL, name, "clkin", 0, 187 mult, div); 188 } 189 190 struct aspeed_clk_soc_data { 191 const struct clk_div_table *div_table; 192 const struct clk_div_table *mac_div_table; 193 struct clk_hw *(*calc_pll)(const char *name, u32 val); 194 }; 195 196 static const struct aspeed_clk_soc_data ast2500_data = { 197 .div_table = ast2500_div_table, 198 .mac_div_table = ast2500_mac_div_table, 199 .calc_pll = aspeed_ast2500_calc_pll, 200 }; 201 202 static const struct aspeed_clk_soc_data ast2400_data = { 203 .div_table = ast2400_div_table, 204 .mac_div_table = ast2400_div_table, 205 .calc_pll = aspeed_ast2400_calc_pll, 206 }; 207 208 static int aspeed_clk_enable(struct clk_hw *hw) 209 { 210 struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); 211 unsigned long flags; 212 u32 clk = BIT(gate->clock_idx); 213 u32 rst = BIT(gate->reset_idx); 214 u32 enval; 215 216 spin_lock_irqsave(gate->lock, flags); 217 218 if (gate->reset_idx >= 0) { 219 /* Put IP in reset */ 220 regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst); 221 222 /* Delay 100us */ 223 udelay(100); 224 } 225 226 /* Enable clock */ 227 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk; 228 regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, enval); 229 230 if (gate->reset_idx >= 0) { 231 /* A delay of 10ms is specified by the ASPEED docs */ 232 mdelay(10); 233 234 /* Take IP out of reset */ 235 regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, 0); 236 } 237 238 spin_unlock_irqrestore(gate->lock, flags); 239 240 return 0; 241 } 242 243 static void aspeed_clk_disable(struct clk_hw *hw) 244 { 245 struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); 246 unsigned long flags; 247 u32 clk = BIT(gate->clock_idx); 248 u32 enval; 249 250 spin_lock_irqsave(gate->lock, flags); 251 252 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? clk : 0; 253 regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, enval); 254 255 spin_unlock_irqrestore(gate->lock, flags); 256 } 257 258 static int aspeed_clk_is_enabled(struct clk_hw *hw) 259 { 260 struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); 261 u32 clk = BIT(gate->clock_idx); 262 u32 reg; 263 264 regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, ®); 265 266 return (reg & clk) ? 0 : 1; 267 } 268 269 static const struct clk_ops aspeed_clk_gate_ops = { 270 .enable = aspeed_clk_enable, 271 .disable = aspeed_clk_disable, 272 .is_enabled = aspeed_clk_is_enabled, 273 }; 274 275 /** 276 * struct aspeed_reset - Aspeed reset controller 277 * @map: regmap to access the containing system controller 278 * @rcdev: reset controller device 279 */ 280 struct aspeed_reset { 281 struct regmap *map; 282 struct reset_controller_dev rcdev; 283 }; 284 285 #define to_aspeed_reset(p) container_of((p), struct aspeed_reset, rcdev) 286 287 static const u8 aspeed_resets[] = { 288 [ASPEED_RESET_XDMA] = 25, 289 [ASPEED_RESET_MCTP] = 24, 290 [ASPEED_RESET_ADC] = 23, 291 [ASPEED_RESET_JTAG_MASTER] = 22, 292 [ASPEED_RESET_MIC] = 18, 293 [ASPEED_RESET_PWM] = 9, 294 [ASPEED_RESET_PCIVGA] = 8, 295 [ASPEED_RESET_I2C] = 2, 296 [ASPEED_RESET_AHB] = 1, 297 }; 298 299 static int aspeed_reset_deassert(struct reset_controller_dev *rcdev, 300 unsigned long id) 301 { 302 struct aspeed_reset *ar = to_aspeed_reset(rcdev); 303 u32 rst = BIT(aspeed_resets[id]); 304 305 return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, 0); 306 } 307 308 static int aspeed_reset_assert(struct reset_controller_dev *rcdev, 309 unsigned long id) 310 { 311 struct aspeed_reset *ar = to_aspeed_reset(rcdev); 312 u32 rst = BIT(aspeed_resets[id]); 313 314 return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, rst); 315 } 316 317 static int aspeed_reset_status(struct reset_controller_dev *rcdev, 318 unsigned long id) 319 { 320 struct aspeed_reset *ar = to_aspeed_reset(rcdev); 321 u32 val, rst = BIT(aspeed_resets[id]); 322 int ret; 323 324 ret = regmap_read(ar->map, ASPEED_RESET_CTRL, &val); 325 if (ret) 326 return ret; 327 328 return !!(val & rst); 329 } 330 331 static const struct reset_control_ops aspeed_reset_ops = { 332 .assert = aspeed_reset_assert, 333 .deassert = aspeed_reset_deassert, 334 .status = aspeed_reset_status, 335 }; 336 337 static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev, 338 const char *name, const char *parent_name, unsigned long flags, 339 struct regmap *map, u8 clock_idx, u8 reset_idx, 340 u8 clk_gate_flags, spinlock_t *lock) 341 { 342 struct aspeed_clk_gate *gate; 343 struct clk_init_data init; 344 struct clk_hw *hw; 345 int ret; 346 347 gate = kzalloc(sizeof(*gate), GFP_KERNEL); 348 if (!gate) 349 return ERR_PTR(-ENOMEM); 350 351 init.name = name; 352 init.ops = &aspeed_clk_gate_ops; 353 init.flags = flags; 354 init.parent_names = parent_name ? &parent_name : NULL; 355 init.num_parents = parent_name ? 1 : 0; 356 357 gate->map = map; 358 gate->clock_idx = clock_idx; 359 gate->reset_idx = reset_idx; 360 gate->flags = clk_gate_flags; 361 gate->lock = lock; 362 gate->hw.init = &init; 363 364 hw = &gate->hw; 365 ret = clk_hw_register(dev, hw); 366 if (ret) { 367 kfree(gate); 368 hw = ERR_PTR(ret); 369 } 370 371 return hw; 372 } 373 374 static int aspeed_clk_probe(struct platform_device *pdev) 375 { 376 const struct aspeed_clk_soc_data *soc_data; 377 struct device *dev = &pdev->dev; 378 struct aspeed_reset *ar; 379 struct regmap *map; 380 struct clk_hw *hw; 381 u32 val, rate; 382 int i, ret; 383 384 map = syscon_node_to_regmap(dev->of_node); 385 if (IS_ERR(map)) { 386 dev_err(dev, "no syscon regmap\n"); 387 return PTR_ERR(map); 388 } 389 390 ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL); 391 if (!ar) 392 return -ENOMEM; 393 394 ar->map = map; 395 ar->rcdev.owner = THIS_MODULE; 396 ar->rcdev.nr_resets = ARRAY_SIZE(aspeed_resets); 397 ar->rcdev.ops = &aspeed_reset_ops; 398 ar->rcdev.of_node = dev->of_node; 399 400 ret = devm_reset_controller_register(dev, &ar->rcdev); 401 if (ret) { 402 dev_err(dev, "could not register reset controller\n"); 403 return ret; 404 } 405 406 /* SoC generations share common layouts but have different divisors */ 407 soc_data = of_device_get_match_data(dev); 408 if (!soc_data) { 409 dev_err(dev, "no match data for platform\n"); 410 return -EINVAL; 411 } 412 413 /* UART clock div13 setting */ 414 regmap_read(map, ASPEED_MISC_CTRL, &val); 415 if (val & UART_DIV13_EN) 416 rate = 24000000 / 13; 417 else 418 rate = 24000000; 419 /* TODO: Find the parent data for the uart clock */ 420 hw = clk_hw_register_fixed_rate(dev, "uart", NULL, 0, rate); 421 if (IS_ERR(hw)) 422 return PTR_ERR(hw); 423 aspeed_clk_data->hws[ASPEED_CLK_UART] = hw; 424 425 /* 426 * Memory controller (M-PLL) PLL. This clock is configured by the 427 * bootloader, and is exposed to Linux as a read-only clock rate. 428 */ 429 regmap_read(map, ASPEED_MPLL_PARAM, &val); 430 hw = soc_data->calc_pll("mpll", val); 431 if (IS_ERR(hw)) 432 return PTR_ERR(hw); 433 aspeed_clk_data->hws[ASPEED_CLK_MPLL] = hw; 434 435 /* SD/SDIO clock divider (TODO: There's a gate too) */ 436 hw = clk_hw_register_divider_table(dev, "sdio", "hpll", 0, 437 scu_base + ASPEED_CLK_SELECTION, 12, 3, 0, 438 soc_data->div_table, 439 &aspeed_clk_lock); 440 if (IS_ERR(hw)) 441 return PTR_ERR(hw); 442 aspeed_clk_data->hws[ASPEED_CLK_SDIO] = hw; 443 444 /* MAC AHB bus clock divider */ 445 hw = clk_hw_register_divider_table(dev, "mac", "hpll", 0, 446 scu_base + ASPEED_CLK_SELECTION, 16, 3, 0, 447 soc_data->mac_div_table, 448 &aspeed_clk_lock); 449 if (IS_ERR(hw)) 450 return PTR_ERR(hw); 451 aspeed_clk_data->hws[ASPEED_CLK_MAC] = hw; 452 453 /* LPC Host (LHCLK) clock divider */ 454 hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0, 455 scu_base + ASPEED_CLK_SELECTION, 20, 3, 0, 456 soc_data->div_table, 457 &aspeed_clk_lock); 458 if (IS_ERR(hw)) 459 return PTR_ERR(hw); 460 aspeed_clk_data->hws[ASPEED_CLK_LHCLK] = hw; 461 462 /* P-Bus (BCLK) clock divider */ 463 hw = clk_hw_register_divider_table(dev, "bclk", "hpll", 0, 464 scu_base + ASPEED_CLK_SELECTION_2, 0, 2, 0, 465 soc_data->div_table, 466 &aspeed_clk_lock); 467 if (IS_ERR(hw)) 468 return PTR_ERR(hw); 469 aspeed_clk_data->hws[ASPEED_CLK_BCLK] = hw; 470 471 /* 472 * TODO: There are a number of clocks that not included in this driver 473 * as more information is required: 474 * D2-PLL 475 * D-PLL 476 * YCLK 477 * RGMII 478 * RMII 479 * UART[1..5] clock source mux 480 * Video Engine (ECLK) mux and clock divider 481 */ 482 483 for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) { 484 const struct aspeed_gate_data *gd = &aspeed_gates[i]; 485 u32 gate_flags; 486 487 /* Special case: the USB port 1 clock (bit 14) is always 488 * working the opposite way from the other ones. 489 */ 490 gate_flags = (gd->clock_idx == 14) ? 0 : CLK_GATE_SET_TO_DISABLE; 491 hw = aspeed_clk_hw_register_gate(dev, 492 gd->name, 493 gd->parent_name, 494 gd->flags, 495 map, 496 gd->clock_idx, 497 gd->reset_idx, 498 gate_flags, 499 &aspeed_clk_lock); 500 if (IS_ERR(hw)) 501 return PTR_ERR(hw); 502 aspeed_clk_data->hws[i] = hw; 503 } 504 505 return 0; 506 }; 507 508 static const struct of_device_id aspeed_clk_dt_ids[] = { 509 { .compatible = "aspeed,ast2400-scu", .data = &ast2400_data }, 510 { .compatible = "aspeed,ast2500-scu", .data = &ast2500_data }, 511 { } 512 }; 513 514 static struct platform_driver aspeed_clk_driver = { 515 .probe = aspeed_clk_probe, 516 .driver = { 517 .name = "aspeed-clk", 518 .of_match_table = aspeed_clk_dt_ids, 519 .suppress_bind_attrs = true, 520 }, 521 }; 522 builtin_platform_driver(aspeed_clk_driver); 523 524 static void __init aspeed_ast2400_cc(struct regmap *map) 525 { 526 struct clk_hw *hw; 527 u32 val, freq, div; 528 529 /* 530 * CLKIN is the crystal oscillator, 24, 48 or 25MHz selected by 531 * strapping 532 */ 533 regmap_read(map, ASPEED_STRAP, &val); 534 if (val & CLKIN_25MHZ_EN) 535 freq = 25000000; 536 else if (val & AST2400_CLK_SOURCE_SEL) 537 freq = 48000000; 538 else 539 freq = 24000000; 540 hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq); 541 pr_debug("clkin @%u MHz\n", freq / 1000000); 542 543 /* 544 * High-speed PLL clock derived from the crystal. This the CPU clock, 545 * and we assume that it is enabled 546 */ 547 regmap_read(map, ASPEED_HPLL_PARAM, &val); 548 WARN(val & AST2400_HPLL_STRAPPED, "hpll is strapped not configured"); 549 aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2400_calc_pll("hpll", val); 550 551 /* 552 * Strap bits 11:10 define the CPU/AHB clock frequency ratio (aka HCLK) 553 * 00: Select CPU:AHB = 1:1 554 * 01: Select CPU:AHB = 2:1 555 * 10: Select CPU:AHB = 4:1 556 * 11: Select CPU:AHB = 3:1 557 */ 558 regmap_read(map, ASPEED_STRAP, &val); 559 val = (val >> 10) & 0x3; 560 div = val + 1; 561 if (div == 3) 562 div = 4; 563 else if (div == 4) 564 div = 3; 565 hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, div); 566 aspeed_clk_data->hws[ASPEED_CLK_AHB] = hw; 567 568 /* APB clock clock selection register SCU08 (aka PCLK) */ 569 hw = clk_hw_register_divider_table(NULL, "apb", "hpll", 0, 570 scu_base + ASPEED_CLK_SELECTION, 23, 3, 0, 571 ast2400_div_table, 572 &aspeed_clk_lock); 573 aspeed_clk_data->hws[ASPEED_CLK_APB] = hw; 574 } 575 576 static void __init aspeed_ast2500_cc(struct regmap *map) 577 { 578 struct clk_hw *hw; 579 u32 val, freq, div; 580 581 /* CLKIN is the crystal oscillator, 24 or 25MHz selected by strapping */ 582 regmap_read(map, ASPEED_STRAP, &val); 583 if (val & CLKIN_25MHZ_EN) 584 freq = 25000000; 585 else 586 freq = 24000000; 587 hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq); 588 pr_debug("clkin @%u MHz\n", freq / 1000000); 589 590 /* 591 * High-speed PLL clock derived from the crystal. This the CPU clock, 592 * and we assume that it is enabled 593 */ 594 regmap_read(map, ASPEED_HPLL_PARAM, &val); 595 aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2500_calc_pll("hpll", val); 596 597 /* Strap bits 11:9 define the AXI/AHB clock frequency ratio (aka HCLK)*/ 598 regmap_read(map, ASPEED_STRAP, &val); 599 val = (val >> 9) & 0x7; 600 WARN(val == 0, "strapping is zero: cannot determine ahb clock"); 601 div = 2 * (val + 1); 602 hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, div); 603 aspeed_clk_data->hws[ASPEED_CLK_AHB] = hw; 604 605 /* APB clock clock selection register SCU08 (aka PCLK) */ 606 regmap_read(map, ASPEED_CLK_SELECTION, &val); 607 val = (val >> 23) & 0x7; 608 div = 4 * (val + 1); 609 hw = clk_hw_register_fixed_factor(NULL, "apb", "hpll", 0, 1, div); 610 aspeed_clk_data->hws[ASPEED_CLK_APB] = hw; 611 }; 612 613 static void __init aspeed_cc_init(struct device_node *np) 614 { 615 struct regmap *map; 616 u32 val; 617 int ret; 618 int i; 619 620 scu_base = of_iomap(np, 0); 621 if (!scu_base) 622 return; 623 624 aspeed_clk_data = kzalloc(sizeof(*aspeed_clk_data) + 625 sizeof(*aspeed_clk_data->hws) * ASPEED_NUM_CLKS, 626 GFP_KERNEL); 627 if (!aspeed_clk_data) 628 return; 629 630 /* 631 * This way all clocks fetched before the platform device probes, 632 * except those we assign here for early use, will be deferred. 633 */ 634 for (i = 0; i < ASPEED_NUM_CLKS; i++) 635 aspeed_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER); 636 637 map = syscon_node_to_regmap(np); 638 if (IS_ERR(map)) { 639 pr_err("no syscon regmap\n"); 640 return; 641 } 642 /* 643 * We check that the regmap works on this very first access, 644 * but as this is an MMIO-backed regmap, subsequent regmap 645 * access is not going to fail and we skip error checks from 646 * this point. 647 */ 648 ret = regmap_read(map, ASPEED_STRAP, &val); 649 if (ret) { 650 pr_err("failed to read strapping register\n"); 651 return; 652 } 653 654 if (of_device_is_compatible(np, "aspeed,ast2400-scu")) 655 aspeed_ast2400_cc(map); 656 else if (of_device_is_compatible(np, "aspeed,ast2500-scu")) 657 aspeed_ast2500_cc(map); 658 else 659 pr_err("unknown platform, failed to add clocks\n"); 660 661 aspeed_clk_data->num = ASPEED_NUM_CLKS; 662 ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_clk_data); 663 if (ret) 664 pr_err("failed to add DT provider: %d\n", ret); 665 }; 666 CLK_OF_DECLARE_DRIVER(aspeed_cc_g5, "aspeed,ast2500-scu", aspeed_cc_init); 667 CLK_OF_DECLARE_DRIVER(aspeed_cc_g4, "aspeed,ast2400-scu", aspeed_cc_init); 668