xref: /openbmc/linux/drivers/clk/bcm/clk-cygnus.c (revision 55fd7e02)
1 /*
2  * Copyright (C) 2014 Broadcom Corporation
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License as
6  * published by the Free Software Foundation version 2.
7  *
8  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
9  * kind, whether express or implied; without even the implied warranty
10  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11  * GNU General Public License for more details.
12  */
13 
14 #include <linux/kernel.h>
15 #include <linux/err.h>
16 #include <linux/clk-provider.h>
17 #include <linux/io.h>
18 #include <linux/of.h>
19 #include <linux/clkdev.h>
20 #include <linux/of_address.h>
21 #include <linux/delay.h>
22 
23 #include <dt-bindings/clock/bcm-cygnus.h>
24 #include "clk-iproc.h"
25 
26 #define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
27 
28 #define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
29 	.pwr_shift = ps, .iso_shift = is }
30 
31 #define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
32 
33 #define ASIU_DIV_VAL(o, es, hs, hw, ls, lw) \
34 		{ .offset = o, .en_shift = es, .high_shift = hs, \
35 		.high_width = hw, .low_shift = ls, .low_width = lw }
36 
37 #define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
38 	.p_reset_shift = prs }
39 
40 #define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
41 	.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas,    \
42 	.ka_width = kaw }
43 
44 #define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
45 
46 #define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
47 	.hold_shift = hs, .bypass_shift = bs }
48 
49 #define ASIU_GATE_VAL(o, es) { .offset = o, .en_shift = es }
50 
51 static void __init cygnus_armpll_init(struct device_node *node)
52 {
53 	iproc_armpll_setup(node);
54 }
55 CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init);
56 
57 static const struct iproc_pll_ctrl genpll = {
58 	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
59 		IPROC_CLK_PLL_NEEDS_SW_CFG,
60 	.aon = AON_VAL(0x0, 2, 1, 0),
61 	.reset = RESET_VAL(0x0, 11, 10),
62 	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
63 	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
64 	.ndiv_int = REG_VAL(0x10, 20, 10),
65 	.ndiv_frac = REG_VAL(0x10, 0, 20),
66 	.pdiv = REG_VAL(0x14, 0, 4),
67 	.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
68 	.status = REG_VAL(0x28, 12, 1),
69 };
70 
71 static const struct iproc_clk_ctrl genpll_clk[] = {
72 	[BCM_CYGNUS_GENPLL_AXI21_CLK] = {
73 		.channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
74 		.flags = IPROC_CLK_AON,
75 		.enable = ENABLE_VAL(0x4, 6, 0, 12),
76 		.mdiv = REG_VAL(0x20, 0, 8),
77 	},
78 	[BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
79 		.channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
80 		.flags = IPROC_CLK_AON,
81 		.enable = ENABLE_VAL(0x4, 7, 1, 13),
82 		.mdiv = REG_VAL(0x20, 10, 8),
83 	},
84 	[BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
85 		.channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
86 		.flags = IPROC_CLK_AON,
87 		.enable = ENABLE_VAL(0x4, 8, 2, 14),
88 		.mdiv = REG_VAL(0x20, 20, 8),
89 	},
90 	[BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
91 		.channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
92 		.flags = IPROC_CLK_AON,
93 		.enable = ENABLE_VAL(0x4, 9, 3, 15),
94 		.mdiv = REG_VAL(0x24, 0, 8),
95 	},
96 	[BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
97 		.channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
98 		.flags = IPROC_CLK_AON,
99 		.enable = ENABLE_VAL(0x4, 10, 4, 16),
100 		.mdiv = REG_VAL(0x24, 10, 8),
101 	},
102 	[BCM_CYGNUS_GENPLL_CAN_CLK] = {
103 		.channel = BCM_CYGNUS_GENPLL_CAN_CLK,
104 		.flags = IPROC_CLK_AON,
105 		.enable = ENABLE_VAL(0x4, 11, 5, 17),
106 		.mdiv = REG_VAL(0x24, 20, 8),
107 	},
108 };
109 
110 static void __init cygnus_genpll_clk_init(struct device_node *node)
111 {
112 	iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
113 			    ARRAY_SIZE(genpll_clk));
114 }
115 CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);
116 
117 static const struct iproc_pll_ctrl lcpll0 = {
118 	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
119 	.aon = AON_VAL(0x0, 2, 5, 4),
120 	.reset = RESET_VAL(0x0, 31, 30),
121 	.dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
122 	.sw_ctrl = SW_CTRL_VAL(0x4, 31),
123 	.ndiv_int = REG_VAL(0x4, 16, 10),
124 	.pdiv = REG_VAL(0x4, 26, 4),
125 	.vco_ctrl = VCO_CTRL_VAL(0x10, 0x14),
126 	.status = REG_VAL(0x18, 12, 1),
127 };
128 
129 static const struct iproc_clk_ctrl lcpll0_clk[] = {
130 	[BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
131 		.channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
132 		.flags = IPROC_CLK_AON,
133 		.enable = ENABLE_VAL(0x0, 7, 1, 13),
134 		.mdiv = REG_VAL(0x8, 0, 8),
135 	},
136 	[BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
137 		.channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
138 		.flags = IPROC_CLK_AON,
139 		.enable = ENABLE_VAL(0x0, 8, 2, 14),
140 		.mdiv = REG_VAL(0x8, 10, 8),
141 	},
142 	[BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
143 		.channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
144 		.flags = IPROC_CLK_AON,
145 		.enable = ENABLE_VAL(0x0, 9, 3, 15),
146 		.mdiv = REG_VAL(0x8, 20, 8),
147 	},
148 	[BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
149 		.channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
150 		.flags = IPROC_CLK_AON,
151 		.enable = ENABLE_VAL(0x0, 10, 4, 16),
152 		.mdiv = REG_VAL(0xc, 0, 8),
153 	},
154 	[BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
155 		.channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
156 		.flags = IPROC_CLK_AON,
157 		.enable = ENABLE_VAL(0x0, 11, 5, 17),
158 		.mdiv = REG_VAL(0xc, 10, 8),
159 	},
160 	[BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
161 		.channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
162 		.flags = IPROC_CLK_AON,
163 		.enable = ENABLE_VAL(0x0, 12, 6, 18),
164 		.mdiv = REG_VAL(0xc, 20, 8),
165 	},
166 };
167 
168 static void __init cygnus_lcpll0_clk_init(struct device_node *node)
169 {
170 	iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
171 			    ARRAY_SIZE(lcpll0_clk));
172 }
173 CLK_OF_DECLARE(cygnus_lcpll0, "brcm,cygnus-lcpll0", cygnus_lcpll0_clk_init);
174 
175 /*
176  * MIPI PLL VCO frequency parameter table
177  */
178 static const struct iproc_pll_vco_param mipipll_vco_params[] = {
179 	/* rate (Hz) ndiv_int ndiv_frac pdiv */
180 	{ 750000000UL,   30,     0,        1 },
181 	{ 1000000000UL,  40,     0,        1 },
182 	{ 1350000000ul,  54,     0,        1 },
183 	{ 2000000000UL,  80,     0,        1 },
184 	{ 2100000000UL,  84,     0,        1 },
185 	{ 2250000000UL,  90,     0,        1 },
186 	{ 2500000000UL,  100,    0,        1 },
187 	{ 2700000000UL,  54,     0,        0 },
188 	{ 2975000000UL,  119,    0,        1 },
189 	{ 3100000000UL,  124,    0,        1 },
190 	{ 3150000000UL,  126,    0,        1 },
191 };
192 
193 static const struct iproc_pll_ctrl mipipll = {
194 	.flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
195 		 IPROC_CLK_NEEDS_READ_BACK,
196 	.aon = AON_VAL(0x0, 4, 17, 16),
197 	.asiu = ASIU_GATE_VAL(0x0, 3),
198 	.reset = RESET_VAL(0x0, 11, 10),
199 	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
200 	.ndiv_int = REG_VAL(0x10, 20, 10),
201 	.ndiv_frac = REG_VAL(0x10, 0, 20),
202 	.pdiv = REG_VAL(0x14, 0, 4),
203 	.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
204 	.status = REG_VAL(0x28, 12, 1),
205 };
206 
207 static const struct iproc_clk_ctrl mipipll_clk[] = {
208 	[BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
209 		.channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
210 		.flags = IPROC_CLK_NEEDS_READ_BACK,
211 		.enable = ENABLE_VAL(0x4, 12, 6, 18),
212 		.mdiv = REG_VAL(0x20, 0, 8),
213 	},
214 	[BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
215 		.channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
216 		.flags = IPROC_CLK_NEEDS_READ_BACK,
217 		.enable = ENABLE_VAL(0x4, 13, 7, 19),
218 		.mdiv = REG_VAL(0x20, 10, 8),
219 	},
220 	[BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
221 		.channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
222 		.flags = IPROC_CLK_NEEDS_READ_BACK,
223 		.enable = ENABLE_VAL(0x4, 14, 8, 20),
224 		.mdiv = REG_VAL(0x20, 20, 8),
225 	},
226 	[BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
227 		.channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
228 		.flags = IPROC_CLK_NEEDS_READ_BACK,
229 		.enable = ENABLE_VAL(0x4, 15, 9, 21),
230 		.mdiv = REG_VAL(0x24, 0, 8),
231 	},
232 	[BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
233 		.channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
234 		.flags = IPROC_CLK_NEEDS_READ_BACK,
235 		.enable = ENABLE_VAL(0x4, 16, 10, 22),
236 		.mdiv = REG_VAL(0x24, 10, 8),
237 	},
238 	[BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
239 		.channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
240 		.flags = IPROC_CLK_NEEDS_READ_BACK,
241 		.enable = ENABLE_VAL(0x4, 17, 11, 23),
242 		.mdiv = REG_VAL(0x24, 20, 8),
243 	},
244 };
245 
246 static void __init cygnus_mipipll_clk_init(struct device_node *node)
247 {
248 	iproc_pll_clk_setup(node, &mipipll, mipipll_vco_params,
249 			    ARRAY_SIZE(mipipll_vco_params), mipipll_clk,
250 			    ARRAY_SIZE(mipipll_clk));
251 }
252 CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);
253 
254 static const struct iproc_asiu_div asiu_div[] = {
255 	[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_DIV_VAL(0x0, 31, 16, 10, 0, 10),
256 	[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_DIV_VAL(0x4, 31, 16, 10, 0, 10),
257 	[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_DIV_VAL(0x8, 31, 16, 10, 0, 10),
258 };
259 
260 static const struct iproc_asiu_gate asiu_gate[] = {
261 	[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_GATE_VAL(0x0, 7),
262 	[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_GATE_VAL(0x0, 9),
263 	[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_GATE_VAL(IPROC_CLK_INVALID_OFFSET, 0),
264 };
265 
266 static void __init cygnus_asiu_init(struct device_node *node)
267 {
268 	iproc_asiu_setup(node, asiu_div, asiu_gate, ARRAY_SIZE(asiu_div));
269 }
270 CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init);
271 
272 static const struct iproc_pll_ctrl audiopll = {
273 	.flags = IPROC_CLK_PLL_NEEDS_SW_CFG | IPROC_CLK_PLL_HAS_NDIV_FRAC |
274 		IPROC_CLK_PLL_USER_MODE_ON | IPROC_CLK_PLL_RESET_ACTIVE_LOW |
275 		IPROC_CLK_PLL_CALC_PARAM,
276 	.reset = RESET_VAL(0x5c, 0, 1),
277 	.dig_filter = DF_VAL(0x48, 0, 3, 6, 4, 3, 3),
278 	.sw_ctrl = SW_CTRL_VAL(0x4, 0),
279 	.ndiv_int = REG_VAL(0x8, 0, 10),
280 	.ndiv_frac = REG_VAL(0x8, 10, 20),
281 	.pdiv = REG_VAL(0x44, 0, 4),
282 	.vco_ctrl = VCO_CTRL_VAL(0x0c, 0x10),
283 	.status = REG_VAL(0x54, 0, 1),
284 	.macro_mode = REG_VAL(0x0, 0, 3),
285 };
286 
287 static const struct iproc_clk_ctrl audiopll_clk[] = {
288 	[BCM_CYGNUS_AUDIOPLL_CH0] = {
289 		.channel = BCM_CYGNUS_AUDIOPLL_CH0,
290 		.flags = IPROC_CLK_AON | IPROC_CLK_MCLK_DIV_BY_2,
291 		.enable = ENABLE_VAL(0x14, 8, 10, 9),
292 		.mdiv = REG_VAL(0x14, 0, 8),
293 	},
294 	[BCM_CYGNUS_AUDIOPLL_CH1] = {
295 		.channel = BCM_CYGNUS_AUDIOPLL_CH1,
296 		.flags = IPROC_CLK_AON,
297 		.enable = ENABLE_VAL(0x18, 8, 10, 9),
298 		.mdiv = REG_VAL(0x18, 0, 8),
299 	},
300 	[BCM_CYGNUS_AUDIOPLL_CH2] = {
301 		.channel = BCM_CYGNUS_AUDIOPLL_CH2,
302 		.flags = IPROC_CLK_AON,
303 		.enable = ENABLE_VAL(0x1c, 8, 10, 9),
304 		.mdiv = REG_VAL(0x1c, 0, 8),
305 	},
306 };
307 
308 static void __init cygnus_audiopll_clk_init(struct device_node *node)
309 {
310 	iproc_pll_clk_setup(node, &audiopll, NULL, 0,
311 			    audiopll_clk,  ARRAY_SIZE(audiopll_clk));
312 }
313 CLK_OF_DECLARE(cygnus_audiopll, "brcm,cygnus-audiopll",
314 			cygnus_audiopll_clk_init);
315