xref: /openbmc/linux/drivers/clk/axs10x/pll_clock.c (revision bab55037)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Synopsys AXS10X SDP Generic PLL clock driver
4  *
5  * Copyright (C) 2017 Synopsys
6  */
7 
8 #include <linux/platform_device.h>
9 #include <linux/module.h>
10 #include <linux/clk-provider.h>
11 #include <linux/delay.h>
12 #include <linux/err.h>
13 #include <linux/device.h>
14 #include <linux/io.h>
15 #include <linux/of_address.h>
16 #include <linux/of_device.h>
17 #include <linux/slab.h>
18 #include <linux/of.h>
19 
20 /* PLL registers addresses */
21 #define PLL_REG_IDIV	0x0
22 #define PLL_REG_FBDIV	0x4
23 #define PLL_REG_ODIV	0x8
24 
25 /*
26  * Bit fields of the PLL IDIV/FBDIV/ODIV registers:
27  *  ________________________________________________________________________
28  * |31                15|    14    |   13   |  12  |11         6|5         0|
29  * |-------RESRVED------|-NOUPDATE-|-BYPASS-|-EDGE-|--HIGHTIME--|--LOWTIME--|
30  * |____________________|__________|________|______|____________|___________|
31  *
32  * Following macros determine the way of access to these registers
33  * They should be set up only using the macros.
34  * reg should be an u32 variable.
35  */
36 
37 #define PLL_REG_GET_LOW(reg)			\
38 	(((reg) & (0x3F << 0)) >> 0)
39 #define PLL_REG_GET_HIGH(reg)			\
40 	(((reg) & (0x3F << 6)) >> 6)
41 #define PLL_REG_GET_EDGE(reg)			\
42 	(((reg) & (BIT(12))) ? 1 : 0)
43 #define PLL_REG_GET_BYPASS(reg)			\
44 	(((reg) & (BIT(13))) ? 1 : 0)
45 #define PLL_REG_GET_NOUPD(reg)			\
46 	(((reg) & (BIT(14))) ? 1 : 0)
47 #define PLL_REG_GET_PAD(reg)			\
48 	(((reg) & (0x1FFFF << 15)) >> 15)
49 
50 #define PLL_REG_SET_LOW(reg, value)		\
51 	{ reg |= (((value) & 0x3F) << 0); }
52 #define PLL_REG_SET_HIGH(reg, value)		\
53 	{ reg |= (((value) & 0x3F) << 6); }
54 #define PLL_REG_SET_EDGE(reg, value)		\
55 	{ reg |= (((value) & 0x01) << 12); }
56 #define PLL_REG_SET_BYPASS(reg, value)		\
57 	{ reg |= (((value) & 0x01) << 13); }
58 #define PLL_REG_SET_NOUPD(reg, value)		\
59 	{ reg |= (((value) & 0x01) << 14); }
60 #define PLL_REG_SET_PAD(reg, value)		\
61 	{ reg |= (((value) & 0x1FFFF) << 15); }
62 
63 #define PLL_LOCK	BIT(0)
64 #define PLL_ERROR	BIT(1)
65 #define PLL_MAX_LOCK_TIME 100 /* 100 us */
66 
67 struct axs10x_pll_cfg {
68 	u32 rate;
69 	u32 idiv;
70 	u32 fbdiv;
71 	u32 odiv;
72 };
73 
74 static const struct axs10x_pll_cfg arc_pll_cfg[] = {
75 	{ 33333333,  1, 1,  1 },
76 	{ 50000000,  1, 30, 20 },
77 	{ 75000000,  2, 45, 10 },
78 	{ 90000000,  2, 54, 10 },
79 	{ 100000000, 1, 30, 10 },
80 	{ 125000000, 2, 45, 6 },
81 	{}
82 };
83 
84 static const struct axs10x_pll_cfg pgu_pll_cfg[] = {
85 	{ 25200000, 1, 84, 90 },
86 	{ 50000000, 1, 100, 54 },
87 	{ 74250000, 1, 44, 16 },
88 	{}
89 };
90 
91 struct axs10x_pll_clk {
92 	struct clk_hw hw;
93 	void __iomem *base;
94 	void __iomem *lock;
95 	const struct axs10x_pll_cfg *pll_cfg;
96 	struct device *dev;
97 };
98 
99 static inline void axs10x_pll_write(struct axs10x_pll_clk *clk, u32 reg,
100 				    u32 val)
101 {
102 	iowrite32(val, clk->base + reg);
103 }
104 
105 static inline u32 axs10x_pll_read(struct axs10x_pll_clk *clk, u32 reg)
106 {
107 	return ioread32(clk->base + reg);
108 }
109 
110 static inline struct axs10x_pll_clk *to_axs10x_pll_clk(struct clk_hw *hw)
111 {
112 	return container_of(hw, struct axs10x_pll_clk, hw);
113 }
114 
115 static inline u32 axs10x_div_get_value(u32 reg)
116 {
117 	if (PLL_REG_GET_BYPASS(reg))
118 		return 1;
119 
120 	return PLL_REG_GET_HIGH(reg) + PLL_REG_GET_LOW(reg);
121 }
122 
123 static inline u32 axs10x_encode_div(unsigned int id, int upd)
124 {
125 	u32 div = 0;
126 
127 	PLL_REG_SET_LOW(div, (id % 2 == 0) ? id >> 1 : (id >> 1) + 1);
128 	PLL_REG_SET_HIGH(div, id >> 1);
129 	PLL_REG_SET_EDGE(div, id % 2);
130 	PLL_REG_SET_BYPASS(div, id == 1 ? 1 : 0);
131 	PLL_REG_SET_NOUPD(div, upd == 0 ? 1 : 0);
132 
133 	return div;
134 }
135 
136 static unsigned long axs10x_pll_recalc_rate(struct clk_hw *hw,
137 					    unsigned long parent_rate)
138 {
139 	u64 rate;
140 	u32 idiv, fbdiv, odiv;
141 	struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw);
142 
143 	idiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_IDIV));
144 	fbdiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_FBDIV));
145 	odiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_ODIV));
146 
147 	rate = (u64)parent_rate * fbdiv;
148 	do_div(rate, idiv * odiv);
149 
150 	return rate;
151 }
152 
153 static long axs10x_pll_round_rate(struct clk_hw *hw, unsigned long rate,
154 				  unsigned long *prate)
155 {
156 	int i;
157 	long best_rate;
158 	struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw);
159 	const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg;
160 
161 	if (pll_cfg[0].rate == 0)
162 		return -EINVAL;
163 
164 	best_rate = pll_cfg[0].rate;
165 
166 	for (i = 1; pll_cfg[i].rate != 0; i++) {
167 		if (abs(rate - pll_cfg[i].rate) < abs(rate - best_rate))
168 			best_rate = pll_cfg[i].rate;
169 	}
170 
171 	return best_rate;
172 }
173 
174 static int axs10x_pll_set_rate(struct clk_hw *hw, unsigned long rate,
175 			       unsigned long parent_rate)
176 {
177 	int i;
178 	struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw);
179 	const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg;
180 
181 	for (i = 0; pll_cfg[i].rate != 0; i++) {
182 		if (pll_cfg[i].rate == rate) {
183 			axs10x_pll_write(clk, PLL_REG_IDIV,
184 					 axs10x_encode_div(pll_cfg[i].idiv, 0));
185 			axs10x_pll_write(clk, PLL_REG_FBDIV,
186 					 axs10x_encode_div(pll_cfg[i].fbdiv, 0));
187 			axs10x_pll_write(clk, PLL_REG_ODIV,
188 					 axs10x_encode_div(pll_cfg[i].odiv, 1));
189 
190 			/*
191 			 * Wait until CGU relocks and check error status.
192 			 * If after timeout CGU is unlocked yet return error
193 			 */
194 			udelay(PLL_MAX_LOCK_TIME);
195 			if (!(ioread32(clk->lock) & PLL_LOCK))
196 				return -ETIMEDOUT;
197 
198 			if (ioread32(clk->lock) & PLL_ERROR)
199 				return -EINVAL;
200 
201 			return 0;
202 		}
203 	}
204 
205 	dev_err(clk->dev, "invalid rate=%ld, parent_rate=%ld\n", rate,
206 			parent_rate);
207 	return -EINVAL;
208 }
209 
210 static const struct clk_ops axs10x_pll_ops = {
211 	.recalc_rate = axs10x_pll_recalc_rate,
212 	.round_rate = axs10x_pll_round_rate,
213 	.set_rate = axs10x_pll_set_rate,
214 };
215 
216 static int axs10x_pll_clk_probe(struct platform_device *pdev)
217 {
218 	struct device *dev = &pdev->dev;
219 	const char *parent_name;
220 	struct axs10x_pll_clk *pll_clk;
221 	struct clk_init_data init = { };
222 	int ret;
223 
224 	pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL);
225 	if (!pll_clk)
226 		return -ENOMEM;
227 
228 	pll_clk->base = devm_platform_ioremap_resource(pdev, 0);
229 	if (IS_ERR(pll_clk->base))
230 		return PTR_ERR(pll_clk->base);
231 
232 	pll_clk->lock = devm_platform_ioremap_resource(pdev, 1);
233 	if (IS_ERR(pll_clk->lock))
234 		return PTR_ERR(pll_clk->lock);
235 
236 	init.name = dev->of_node->name;
237 	init.ops = &axs10x_pll_ops;
238 	parent_name = of_clk_get_parent_name(dev->of_node, 0);
239 	init.parent_names = &parent_name;
240 	init.num_parents = 1;
241 	pll_clk->hw.init = &init;
242 	pll_clk->dev = dev;
243 	pll_clk->pll_cfg = of_device_get_match_data(dev);
244 
245 	if (!pll_clk->pll_cfg) {
246 		dev_err(dev, "No OF match data provided\n");
247 		return -EINVAL;
248 	}
249 
250 	ret = devm_clk_hw_register(dev, &pll_clk->hw);
251 	if (ret) {
252 		dev_err(dev, "failed to register %s clock\n", init.name);
253 		return ret;
254 	}
255 
256 	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get,
257 			&pll_clk->hw);
258 }
259 
260 static int axs10x_pll_clk_remove(struct platform_device *pdev)
261 {
262 	of_clk_del_provider(pdev->dev.of_node);
263 	return 0;
264 }
265 
266 static void __init of_axs10x_pll_clk_setup(struct device_node *node)
267 {
268 	const char *parent_name;
269 	struct axs10x_pll_clk *pll_clk;
270 	struct clk_init_data init = { };
271 	int ret;
272 
273 	pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
274 	if (!pll_clk)
275 		return;
276 
277 	pll_clk->base = of_iomap(node, 0);
278 	if (!pll_clk->base) {
279 		pr_err("failed to map pll div registers\n");
280 		goto err_free_pll_clk;
281 	}
282 
283 	pll_clk->lock = of_iomap(node, 1);
284 	if (!pll_clk->lock) {
285 		pr_err("failed to map pll lock register\n");
286 		goto err_unmap_base;
287 	}
288 
289 	init.name = node->name;
290 	init.ops = &axs10x_pll_ops;
291 	parent_name = of_clk_get_parent_name(node, 0);
292 	init.parent_names = &parent_name;
293 	init.num_parents = parent_name ? 1 : 0;
294 	pll_clk->hw.init = &init;
295 	pll_clk->pll_cfg = arc_pll_cfg;
296 
297 	ret = clk_hw_register(NULL, &pll_clk->hw);
298 	if (ret) {
299 		pr_err("failed to register %pOFn clock\n", node);
300 		goto err_unmap_lock;
301 	}
302 
303 	ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll_clk->hw);
304 	if (ret) {
305 		pr_err("failed to add hw provider for %pOFn clock\n", node);
306 		goto err_unregister_clk;
307 	}
308 
309 	return;
310 
311 err_unregister_clk:
312 	clk_hw_unregister(&pll_clk->hw);
313 err_unmap_lock:
314 	iounmap(pll_clk->lock);
315 err_unmap_base:
316 	iounmap(pll_clk->base);
317 err_free_pll_clk:
318 	kfree(pll_clk);
319 }
320 CLK_OF_DECLARE(axs10x_pll_clock, "snps,axs10x-arc-pll-clock",
321 	       of_axs10x_pll_clk_setup);
322 
323 static const struct of_device_id axs10x_pll_clk_id[] = {
324 	{ .compatible = "snps,axs10x-pgu-pll-clock", .data = &pgu_pll_cfg},
325 	{ }
326 };
327 MODULE_DEVICE_TABLE(of, axs10x_pll_clk_id);
328 
329 static struct platform_driver axs10x_pll_clk_driver = {
330 	.driver = {
331 		.name = "axs10x-pll-clock",
332 		.of_match_table = axs10x_pll_clk_id,
333 	},
334 	.probe = axs10x_pll_clk_probe,
335 	.remove = axs10x_pll_clk_remove,
336 };
337 builtin_platform_driver(axs10x_pll_clk_driver);
338 
339 MODULE_AUTHOR("Vlad Zakharov <vzakhar@synopsys.com>");
340 MODULE_DESCRIPTION("Synopsys AXS10X SDP Generic PLL Clock Driver");
341 MODULE_LICENSE("GPL v2");
342