xref: /openbmc/linux/drivers/clk/at91/clk-pll.c (revision 8ffdff6a)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
4  */
5 
6 #include <linux/clk-provider.h>
7 #include <linux/clkdev.h>
8 #include <linux/clk/at91_pmc.h>
9 #include <linux/of.h>
10 #include <linux/mfd/syscon.h>
11 #include <linux/regmap.h>
12 
13 #include "pmc.h"
14 
15 #define PLL_STATUS_MASK(id)	(1 << (1 + (id)))
16 #define PLL_REG(id)		(AT91_CKGR_PLLAR + ((id) * 4))
17 #define PLL_DIV_MASK		0xff
18 #define PLL_DIV_MAX		PLL_DIV_MASK
19 #define PLL_DIV(reg)		((reg) & PLL_DIV_MASK)
20 #define PLL_MUL(reg, layout)	(((reg) >> (layout)->mul_shift) & \
21 				 (layout)->mul_mask)
22 #define PLL_MUL_MIN		2
23 #define PLL_MUL_MASK(layout)	((layout)->mul_mask)
24 #define PLL_MUL_MAX(layout)	(PLL_MUL_MASK(layout) + 1)
25 #define PLL_ICPR_SHIFT(id)	((id) * 16)
26 #define PLL_ICPR_MASK(id)	(0xffff << PLL_ICPR_SHIFT(id))
27 #define PLL_MAX_COUNT		0x3f
28 #define PLL_COUNT_SHIFT		8
29 #define PLL_OUT_SHIFT		14
30 #define PLL_MAX_ID		1
31 
32 #define to_clk_pll(hw) container_of(hw, struct clk_pll, hw)
33 
34 struct clk_pll {
35 	struct clk_hw hw;
36 	struct regmap *regmap;
37 	u8 id;
38 	u8 div;
39 	u8 range;
40 	u16 mul;
41 	const struct clk_pll_layout *layout;
42 	const struct clk_pll_characteristics *characteristics;
43 };
44 
45 static inline bool clk_pll_ready(struct regmap *regmap, int id)
46 {
47 	unsigned int status;
48 
49 	regmap_read(regmap, AT91_PMC_SR, &status);
50 
51 	return status & PLL_STATUS_MASK(id) ? 1 : 0;
52 }
53 
54 static int clk_pll_prepare(struct clk_hw *hw)
55 {
56 	struct clk_pll *pll = to_clk_pll(hw);
57 	struct regmap *regmap = pll->regmap;
58 	const struct clk_pll_layout *layout = pll->layout;
59 	const struct clk_pll_characteristics *characteristics =
60 							pll->characteristics;
61 	u8 id = pll->id;
62 	u32 mask = PLL_STATUS_MASK(id);
63 	int offset = PLL_REG(id);
64 	u8 out = 0;
65 	unsigned int pllr;
66 	unsigned int status;
67 	u8 div;
68 	u16 mul;
69 
70 	regmap_read(regmap, offset, &pllr);
71 	div = PLL_DIV(pllr);
72 	mul = PLL_MUL(pllr, layout);
73 
74 	regmap_read(regmap, AT91_PMC_SR, &status);
75 	if ((status & mask) &&
76 	    (div == pll->div && mul == pll->mul))
77 		return 0;
78 
79 	if (characteristics->out)
80 		out = characteristics->out[pll->range];
81 
82 	if (characteristics->icpll)
83 		regmap_update_bits(regmap, AT91_PMC_PLLICPR, PLL_ICPR_MASK(id),
84 			characteristics->icpll[pll->range] << PLL_ICPR_SHIFT(id));
85 
86 	regmap_update_bits(regmap, offset, layout->pllr_mask,
87 			pll->div | (PLL_MAX_COUNT << PLL_COUNT_SHIFT) |
88 			(out << PLL_OUT_SHIFT) |
89 			((pll->mul & layout->mul_mask) << layout->mul_shift));
90 
91 	while (!clk_pll_ready(regmap, pll->id))
92 		cpu_relax();
93 
94 	return 0;
95 }
96 
97 static int clk_pll_is_prepared(struct clk_hw *hw)
98 {
99 	struct clk_pll *pll = to_clk_pll(hw);
100 
101 	return clk_pll_ready(pll->regmap, pll->id);
102 }
103 
104 static void clk_pll_unprepare(struct clk_hw *hw)
105 {
106 	struct clk_pll *pll = to_clk_pll(hw);
107 	unsigned int mask = pll->layout->pllr_mask;
108 
109 	regmap_update_bits(pll->regmap, PLL_REG(pll->id), mask, ~mask);
110 }
111 
112 static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
113 					 unsigned long parent_rate)
114 {
115 	struct clk_pll *pll = to_clk_pll(hw);
116 
117 	if (!pll->div || !pll->mul)
118 		return 0;
119 
120 	return (parent_rate / pll->div) * (pll->mul + 1);
121 }
122 
123 static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
124 				     unsigned long parent_rate,
125 				     u32 *div, u32 *mul,
126 				     u32 *index) {
127 	const struct clk_pll_layout *layout = pll->layout;
128 	const struct clk_pll_characteristics *characteristics =
129 							pll->characteristics;
130 	unsigned long bestremainder = ULONG_MAX;
131 	unsigned long maxdiv, mindiv, tmpdiv;
132 	long bestrate = -ERANGE;
133 	unsigned long bestdiv;
134 	unsigned long bestmul;
135 	int i = 0;
136 
137 	/* Check if parent_rate is a valid input rate */
138 	if (parent_rate < characteristics->input.min)
139 		return -ERANGE;
140 
141 	/*
142 	 * Calculate minimum divider based on the minimum multiplier, the
143 	 * parent_rate and the requested rate.
144 	 * Should always be 2 according to the input and output characteristics
145 	 * of the PLL blocks.
146 	 */
147 	mindiv = (parent_rate * PLL_MUL_MIN) / rate;
148 	if (!mindiv)
149 		mindiv = 1;
150 
151 	if (parent_rate > characteristics->input.max) {
152 		tmpdiv = DIV_ROUND_UP(parent_rate, characteristics->input.max);
153 		if (tmpdiv > PLL_DIV_MAX)
154 			return -ERANGE;
155 
156 		if (tmpdiv > mindiv)
157 			mindiv = tmpdiv;
158 	}
159 
160 	/*
161 	 * Calculate the maximum divider which is limited by PLL register
162 	 * layout (limited by the MUL or DIV field size).
163 	 */
164 	maxdiv = DIV_ROUND_UP(parent_rate * PLL_MUL_MAX(layout), rate);
165 	if (maxdiv > PLL_DIV_MAX)
166 		maxdiv = PLL_DIV_MAX;
167 
168 	/*
169 	 * Iterate over the acceptable divider values to find the best
170 	 * divider/multiplier pair (the one that generates the closest
171 	 * rate to the requested one).
172 	 */
173 	for (tmpdiv = mindiv; tmpdiv <= maxdiv; tmpdiv++) {
174 		unsigned long remainder;
175 		unsigned long tmprate;
176 		unsigned long tmpmul;
177 
178 		/*
179 		 * Calculate the multiplier associated with the current
180 		 * divider that provide the closest rate to the requested one.
181 		 */
182 		tmpmul = DIV_ROUND_CLOSEST(rate, parent_rate / tmpdiv);
183 		tmprate = (parent_rate / tmpdiv) * tmpmul;
184 		if (tmprate > rate)
185 			remainder = tmprate - rate;
186 		else
187 			remainder = rate - tmprate;
188 
189 		/*
190 		 * Compare the remainder with the best remainder found until
191 		 * now and elect a new best multiplier/divider pair if the
192 		 * current remainder is smaller than the best one.
193 		 */
194 		if (remainder < bestremainder) {
195 			bestremainder = remainder;
196 			bestdiv = tmpdiv;
197 			bestmul = tmpmul;
198 			bestrate = tmprate;
199 		}
200 
201 		/*
202 		 * We've found a perfect match!
203 		 * Stop searching now and use this multiplier/divider pair.
204 		 */
205 		if (!remainder)
206 			break;
207 	}
208 
209 	/* We haven't found any multiplier/divider pair => return -ERANGE */
210 	if (bestrate < 0)
211 		return bestrate;
212 
213 	/* Check if bestrate is a valid output rate  */
214 	for (i = 0; i < characteristics->num_output; i++) {
215 		if (bestrate >= characteristics->output[i].min &&
216 		    bestrate <= characteristics->output[i].max)
217 			break;
218 	}
219 
220 	if (i >= characteristics->num_output)
221 		return -ERANGE;
222 
223 	if (div)
224 		*div = bestdiv;
225 	if (mul)
226 		*mul = bestmul - 1;
227 	if (index)
228 		*index = i;
229 
230 	return bestrate;
231 }
232 
233 static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
234 					unsigned long *parent_rate)
235 {
236 	struct clk_pll *pll = to_clk_pll(hw);
237 
238 	return clk_pll_get_best_div_mul(pll, rate, *parent_rate,
239 					NULL, NULL, NULL);
240 }
241 
242 static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
243 			    unsigned long parent_rate)
244 {
245 	struct clk_pll *pll = to_clk_pll(hw);
246 	long ret;
247 	u32 div;
248 	u32 mul;
249 	u32 index;
250 
251 	ret = clk_pll_get_best_div_mul(pll, rate, parent_rate,
252 				       &div, &mul, &index);
253 	if (ret < 0)
254 		return ret;
255 
256 	pll->range = index;
257 	pll->div = div;
258 	pll->mul = mul;
259 
260 	return 0;
261 }
262 
263 static const struct clk_ops pll_ops = {
264 	.prepare = clk_pll_prepare,
265 	.unprepare = clk_pll_unprepare,
266 	.is_prepared = clk_pll_is_prepared,
267 	.recalc_rate = clk_pll_recalc_rate,
268 	.round_rate = clk_pll_round_rate,
269 	.set_rate = clk_pll_set_rate,
270 };
271 
272 struct clk_hw * __init
273 at91_clk_register_pll(struct regmap *regmap, const char *name,
274 		      const char *parent_name, u8 id,
275 		      const struct clk_pll_layout *layout,
276 		      const struct clk_pll_characteristics *characteristics)
277 {
278 	struct clk_pll *pll;
279 	struct clk_hw *hw;
280 	struct clk_init_data init;
281 	int offset = PLL_REG(id);
282 	unsigned int pllr;
283 	int ret;
284 
285 	if (id > PLL_MAX_ID)
286 		return ERR_PTR(-EINVAL);
287 
288 	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
289 	if (!pll)
290 		return ERR_PTR(-ENOMEM);
291 
292 	init.name = name;
293 	init.ops = &pll_ops;
294 	init.parent_names = &parent_name;
295 	init.num_parents = 1;
296 	init.flags = CLK_SET_RATE_GATE;
297 
298 	pll->id = id;
299 	pll->hw.init = &init;
300 	pll->layout = layout;
301 	pll->characteristics = characteristics;
302 	pll->regmap = regmap;
303 	regmap_read(regmap, offset, &pllr);
304 	pll->div = PLL_DIV(pllr);
305 	pll->mul = PLL_MUL(pllr, layout);
306 
307 	hw = &pll->hw;
308 	ret = clk_hw_register(NULL, &pll->hw);
309 	if (ret) {
310 		kfree(pll);
311 		hw = ERR_PTR(ret);
312 	}
313 
314 	return hw;
315 }
316 
317 
318 const struct clk_pll_layout at91rm9200_pll_layout = {
319 	.pllr_mask = 0x7FFFFFF,
320 	.mul_shift = 16,
321 	.mul_mask = 0x7FF,
322 };
323 
324 const struct clk_pll_layout at91sam9g45_pll_layout = {
325 	.pllr_mask = 0xFFFFFF,
326 	.mul_shift = 16,
327 	.mul_mask = 0xFF,
328 };
329 
330 const struct clk_pll_layout at91sam9g20_pllb_layout = {
331 	.pllr_mask = 0x3FFFFF,
332 	.mul_shift = 16,
333 	.mul_mask = 0x3F,
334 };
335 
336 const struct clk_pll_layout sama5d3_pll_layout = {
337 	.pllr_mask = 0x1FFFFFF,
338 	.mul_shift = 18,
339 	.mul_mask = 0x7F,
340 };
341