xref: /openbmc/linux/drivers/char/xillybus/xillybus.h (revision 806b5228)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * linux/drivers/misc/xillybus.h
4  *
5  * Copyright 2011 Xillybus Ltd, http://xillybus.com
6  *
7  * Header file for the Xillybus FPGA/host framework.
8  */
9 
10 #ifndef __XILLYBUS_H
11 #define __XILLYBUS_H
12 
13 #include <linux/list.h>
14 #include <linux/device.h>
15 #include <linux/dma-mapping.h>
16 #include <linux/interrupt.h>
17 #include <linux/sched.h>
18 #include <linux/cdev.h>
19 #include <linux/spinlock.h>
20 #include <linux/mutex.h>
21 #include <linux/workqueue.h>
22 
23 struct xilly_endpoint_hardware;
24 
25 struct xilly_buffer {
26 	void *addr;
27 	dma_addr_t dma_addr;
28 	int end_offset; /* Counting elements, not bytes */
29 };
30 
31 struct xilly_idt_handle {
32 	unsigned char *chandesc;
33 	unsigned char *names;
34 	int names_len;
35 	int entries;
36 };
37 
38 /*
39  * Read-write confusion: wr_* and rd_* notation sticks to FPGA view, so
40  * wr_* buffers are those consumed by read(), since the FPGA writes to them
41  * and vice versa.
42  */
43 
44 struct xilly_channel {
45 	struct xilly_endpoint *endpoint;
46 	int chan_num;
47 	int log2_element_size;
48 	int seekable;
49 
50 	struct xilly_buffer **wr_buffers; /* FPGA writes, driver reads! */
51 	int num_wr_buffers;
52 	unsigned int wr_buf_size; /* In bytes */
53 	int wr_fpga_buf_idx;
54 	int wr_host_buf_idx;
55 	int wr_host_buf_pos;
56 	int wr_empty;
57 	int wr_ready; /* Significant only when wr_empty == 1 */
58 	int wr_sleepy;
59 	int wr_eof;
60 	int wr_hangup;
61 	spinlock_t wr_spinlock;
62 	struct mutex wr_mutex;
63 	wait_queue_head_t wr_wait;
64 	wait_queue_head_t wr_ready_wait;
65 	int wr_ref_count;
66 	int wr_synchronous;
67 	int wr_allow_partial;
68 	int wr_exclusive_open;
69 	int wr_supports_nonempty;
70 
71 	struct xilly_buffer **rd_buffers; /* FPGA reads, driver writes! */
72 	int num_rd_buffers;
73 	unsigned int rd_buf_size; /* In bytes */
74 	int rd_fpga_buf_idx;
75 	int rd_host_buf_pos;
76 	int rd_host_buf_idx;
77 	int rd_full;
78 	spinlock_t rd_spinlock;
79 	struct mutex rd_mutex;
80 	wait_queue_head_t rd_wait;
81 	int rd_ref_count;
82 	int rd_allow_partial;
83 	int rd_synchronous;
84 	int rd_exclusive_open;
85 	struct delayed_work rd_workitem;
86 	unsigned char rd_leftovers[4];
87 };
88 
89 struct xilly_endpoint {
90 	struct device *dev;
91 	struct module *owner;
92 
93 	int dma_using_dac; /* =1 if 64-bit DMA is used, =0 otherwise. */
94 	__iomem void *registers;
95 	int fatal_error;
96 
97 	struct mutex register_mutex;
98 	wait_queue_head_t ep_wait;
99 
100 	int num_channels; /* EXCLUDING message buffer */
101 	struct xilly_channel **channels;
102 	int msg_counter;
103 	int failed_messages;
104 	int idtlen;
105 
106 	u32 *msgbuf_addr;
107 	dma_addr_t msgbuf_dma_addr;
108 	unsigned int msg_buf_size;
109 };
110 
111 struct xilly_mapping {
112 	struct device *device;
113 	dma_addr_t dma_addr;
114 	size_t size;
115 	int direction;
116 };
117 
118 irqreturn_t xillybus_isr(int irq, void *data);
119 
120 struct xilly_endpoint *xillybus_init_endpoint(struct device *dev);
121 
122 int xillybus_endpoint_discovery(struct xilly_endpoint *endpoint);
123 
124 void xillybus_endpoint_remove(struct xilly_endpoint *endpoint);
125 
126 #endif /* __XILLYBUS_H */
127