1 // SPDX-License-Identifier: GPL-2.0-or-later
2  /******************************************************************************
3  * Nuvoton TPM I2C Device Driver Interface for WPCT301/NPCT501/NPCT6XX,
4  * based on the TCG TPM Interface Spec version 1.2.
5  * Specifications at www.trustedcomputinggroup.org
6  *
7  * Copyright (C) 2011, Nuvoton Technology Corporation.
8  *  Dan Morav <dan.morav@nuvoton.com>
9  * Copyright (C) 2013, Obsidian Research Corp.
10  *  Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
11  *
12  * Nuvoton contact information: APC.Support@nuvoton.com
13  *****************************************************************************/
14 
15 #include <linux/init.h>
16 #include <linux/module.h>
17 #include <linux/moduleparam.h>
18 #include <linux/slab.h>
19 #include <linux/interrupt.h>
20 #include <linux/wait.h>
21 #include <linux/i2c.h>
22 #include <linux/of_device.h>
23 #include "tpm.h"
24 
25 /* I2C interface offsets */
26 #define TPM_STS			0x00
27 #define TPM_BURST_COUNT		0x01
28 #define TPM_DATA_FIFO_W		0x20
29 #define TPM_DATA_FIFO_R		0x40
30 #define TPM_VID_DID_RID		0x60
31 #define TPM_I2C_RETRIES		5
32 /*
33  * I2C bus device maximum buffer size w/o counting I2C address or command
34  * i.e. max size required for I2C write is 34 = addr, command, 32 bytes data
35  */
36 #define TPM_I2C_MAX_BUF_SIZE           32
37 #define TPM_I2C_RETRY_COUNT            32
38 #define TPM_I2C_BUS_DELAY              1000      	/* usec */
39 #define TPM_I2C_RETRY_DELAY_SHORT      (2 * 1000)	/* usec */
40 #define TPM_I2C_RETRY_DELAY_LONG       (10 * 1000) 	/* usec */
41 #define TPM_I2C_DELAY_RANGE            300		/* usec */
42 
43 #define OF_IS_TPM2 ((void *)1)
44 #define I2C_IS_TPM2 1
45 
46 struct priv_data {
47 	int irq;
48 	unsigned int intrs;
49 	wait_queue_head_t read_queue;
50 };
51 
52 static s32 i2c_nuvoton_read_buf(struct i2c_client *client, u8 offset, u8 size,
53 				u8 *data)
54 {
55 	s32 status;
56 
57 	status = i2c_smbus_read_i2c_block_data(client, offset, size, data);
58 	dev_dbg(&client->dev,
59 		"%s(offset=%u size=%u data=%*ph) -> sts=%d\n", __func__,
60 		offset, size, (int)size, data, status);
61 	return status;
62 }
63 
64 static s32 i2c_nuvoton_write_buf(struct i2c_client *client, u8 offset, u8 size,
65 				 u8 *data)
66 {
67 	s32 status;
68 
69 	status = i2c_smbus_write_i2c_block_data(client, offset, size, data);
70 	dev_dbg(&client->dev,
71 		"%s(offset=%u size=%u data=%*ph) -> sts=%d\n", __func__,
72 		offset, size, (int)size, data, status);
73 	return status;
74 }
75 
76 #define TPM_STS_VALID          0x80
77 #define TPM_STS_COMMAND_READY  0x40
78 #define TPM_STS_GO             0x20
79 #define TPM_STS_DATA_AVAIL     0x10
80 #define TPM_STS_EXPECT         0x08
81 #define TPM_STS_RESPONSE_RETRY 0x02
82 #define TPM_STS_ERR_VAL        0x07    /* bit2...bit0 reads always 0 */
83 
84 #define TPM_I2C_SHORT_TIMEOUT  750     /* ms */
85 #define TPM_I2C_LONG_TIMEOUT   2000    /* 2 sec */
86 
87 /* read TPM_STS register */
88 static u8 i2c_nuvoton_read_status(struct tpm_chip *chip)
89 {
90 	struct i2c_client *client = to_i2c_client(chip->dev.parent);
91 	s32 status;
92 	u8 data;
93 
94 	status = i2c_nuvoton_read_buf(client, TPM_STS, 1, &data);
95 	if (status <= 0) {
96 		dev_err(&chip->dev, "%s() error return %d\n", __func__,
97 			status);
98 		data = TPM_STS_ERR_VAL;
99 	}
100 
101 	return data;
102 }
103 
104 /* write byte to TPM_STS register */
105 static s32 i2c_nuvoton_write_status(struct i2c_client *client, u8 data)
106 {
107 	s32 status;
108 	int i;
109 
110 	/* this causes the current command to be aborted */
111 	for (i = 0, status = -1; i < TPM_I2C_RETRY_COUNT && status < 0; i++) {
112 		status = i2c_nuvoton_write_buf(client, TPM_STS, 1, &data);
113 		if (status < 0)
114 			usleep_range(TPM_I2C_BUS_DELAY, TPM_I2C_BUS_DELAY
115 				     + TPM_I2C_DELAY_RANGE);
116 	}
117 	return status;
118 }
119 
120 /* write commandReady to TPM_STS register */
121 static void i2c_nuvoton_ready(struct tpm_chip *chip)
122 {
123 	struct i2c_client *client = to_i2c_client(chip->dev.parent);
124 	s32 status;
125 
126 	/* this causes the current command to be aborted */
127 	status = i2c_nuvoton_write_status(client, TPM_STS_COMMAND_READY);
128 	if (status < 0)
129 		dev_err(&chip->dev,
130 			"%s() fail to write TPM_STS.commandReady\n", __func__);
131 }
132 
133 /* read burstCount field from TPM_STS register
134  * return -1 on fail to read */
135 static int i2c_nuvoton_get_burstcount(struct i2c_client *client,
136 				      struct tpm_chip *chip)
137 {
138 	unsigned long stop = jiffies + chip->timeout_d;
139 	s32 status;
140 	int burst_count = -1;
141 	u8 data;
142 
143 	/* wait for burstcount to be non-zero */
144 	do {
145 		/* in I2C burstCount is 1 byte */
146 		status = i2c_nuvoton_read_buf(client, TPM_BURST_COUNT, 1,
147 					      &data);
148 		if (status > 0 && data > 0) {
149 			burst_count = min_t(u8, TPM_I2C_MAX_BUF_SIZE, data);
150 			break;
151 		}
152 		usleep_range(TPM_I2C_BUS_DELAY, TPM_I2C_BUS_DELAY
153 			     + TPM_I2C_DELAY_RANGE);
154 	} while (time_before(jiffies, stop));
155 
156 	return burst_count;
157 }
158 
159 /*
160  * WPCT301/NPCT501/NPCT6XX SINT# supports only dataAvail
161  * any call to this function which is not waiting for dataAvail will
162  * set queue to NULL to avoid waiting for interrupt
163  */
164 static bool i2c_nuvoton_check_status(struct tpm_chip *chip, u8 mask, u8 value)
165 {
166 	u8 status = i2c_nuvoton_read_status(chip);
167 	return (status != TPM_STS_ERR_VAL) && ((status & mask) == value);
168 }
169 
170 static int i2c_nuvoton_wait_for_stat(struct tpm_chip *chip, u8 mask, u8 value,
171 				     u32 timeout, wait_queue_head_t *queue)
172 {
173 	if ((chip->flags & TPM_CHIP_FLAG_IRQ) && queue) {
174 		s32 rc;
175 		struct priv_data *priv = dev_get_drvdata(&chip->dev);
176 		unsigned int cur_intrs = priv->intrs;
177 
178 		enable_irq(priv->irq);
179 		rc = wait_event_interruptible_timeout(*queue,
180 						      cur_intrs != priv->intrs,
181 						      timeout);
182 		if (rc > 0)
183 			return 0;
184 		/* At this point we know that the SINT pin is asserted, so we
185 		 * do not need to do i2c_nuvoton_check_status */
186 	} else {
187 		unsigned long ten_msec, stop;
188 		bool status_valid;
189 
190 		/* check current status */
191 		status_valid = i2c_nuvoton_check_status(chip, mask, value);
192 		if (status_valid)
193 			return 0;
194 
195 		/* use polling to wait for the event */
196 		ten_msec = jiffies + usecs_to_jiffies(TPM_I2C_RETRY_DELAY_LONG);
197 		stop = jiffies + timeout;
198 		do {
199 			if (time_before(jiffies, ten_msec))
200 				usleep_range(TPM_I2C_RETRY_DELAY_SHORT,
201 					     TPM_I2C_RETRY_DELAY_SHORT
202 					     + TPM_I2C_DELAY_RANGE);
203 			else
204 				usleep_range(TPM_I2C_RETRY_DELAY_LONG,
205 					     TPM_I2C_RETRY_DELAY_LONG
206 					     + TPM_I2C_DELAY_RANGE);
207 			status_valid = i2c_nuvoton_check_status(chip, mask,
208 								value);
209 			if (status_valid)
210 				return 0;
211 		} while (time_before(jiffies, stop));
212 	}
213 	dev_err(&chip->dev, "%s(%02x, %02x) -> timeout\n", __func__, mask,
214 		value);
215 	return -ETIMEDOUT;
216 }
217 
218 /* wait for dataAvail field to be set in the TPM_STS register */
219 static int i2c_nuvoton_wait_for_data_avail(struct tpm_chip *chip, u32 timeout,
220 					   wait_queue_head_t *queue)
221 {
222 	return i2c_nuvoton_wait_for_stat(chip,
223 					 TPM_STS_DATA_AVAIL | TPM_STS_VALID,
224 					 TPM_STS_DATA_AVAIL | TPM_STS_VALID,
225 					 timeout, queue);
226 }
227 
228 /* Read @count bytes into @buf from TPM_RD_FIFO register */
229 static int i2c_nuvoton_recv_data(struct i2c_client *client,
230 				 struct tpm_chip *chip, u8 *buf, size_t count)
231 {
232 	struct priv_data *priv = dev_get_drvdata(&chip->dev);
233 	s32 rc;
234 	int burst_count, bytes2read, size = 0;
235 
236 	while (size < count &&
237 	       i2c_nuvoton_wait_for_data_avail(chip,
238 					       chip->timeout_c,
239 					       &priv->read_queue) == 0) {
240 		burst_count = i2c_nuvoton_get_burstcount(client, chip);
241 		if (burst_count < 0) {
242 			dev_err(&chip->dev,
243 				"%s() fail to read burstCount=%d\n", __func__,
244 				burst_count);
245 			return -EIO;
246 		}
247 		bytes2read = min_t(size_t, burst_count, count - size);
248 		rc = i2c_nuvoton_read_buf(client, TPM_DATA_FIFO_R,
249 					  bytes2read, &buf[size]);
250 		if (rc < 0) {
251 			dev_err(&chip->dev,
252 				"%s() fail on i2c_nuvoton_read_buf()=%d\n",
253 				__func__, rc);
254 			return -EIO;
255 		}
256 		dev_dbg(&chip->dev, "%s(%d):", __func__, bytes2read);
257 		size += bytes2read;
258 	}
259 
260 	return size;
261 }
262 
263 /* Read TPM command results */
264 static int i2c_nuvoton_recv(struct tpm_chip *chip, u8 *buf, size_t count)
265 {
266 	struct priv_data *priv = dev_get_drvdata(&chip->dev);
267 	struct device *dev = chip->dev.parent;
268 	struct i2c_client *client = to_i2c_client(dev);
269 	s32 rc;
270 	int status;
271 	int burst_count;
272 	int retries;
273 	int size = 0;
274 	u32 expected;
275 
276 	if (count < TPM_HEADER_SIZE) {
277 		i2c_nuvoton_ready(chip);    /* return to idle */
278 		dev_err(dev, "%s() count < header size\n", __func__);
279 		return -EIO;
280 	}
281 	for (retries = 0; retries < TPM_I2C_RETRIES; retries++) {
282 		if (retries > 0) {
283 			/* if this is not the first trial, set responseRetry */
284 			i2c_nuvoton_write_status(client,
285 						 TPM_STS_RESPONSE_RETRY);
286 		}
287 		/*
288 		 * read first available (> 10 bytes), including:
289 		 * tag, paramsize, and result
290 		 */
291 		status = i2c_nuvoton_wait_for_data_avail(
292 			chip, chip->timeout_c, &priv->read_queue);
293 		if (status != 0) {
294 			dev_err(dev, "%s() timeout on dataAvail\n", __func__);
295 			size = -ETIMEDOUT;
296 			continue;
297 		}
298 		burst_count = i2c_nuvoton_get_burstcount(client, chip);
299 		if (burst_count < 0) {
300 			dev_err(dev, "%s() fail to get burstCount\n", __func__);
301 			size = -EIO;
302 			continue;
303 		}
304 		size = i2c_nuvoton_recv_data(client, chip, buf,
305 					     burst_count);
306 		if (size < TPM_HEADER_SIZE) {
307 			dev_err(dev, "%s() fail to read header\n", __func__);
308 			size = -EIO;
309 			continue;
310 		}
311 		/*
312 		 * convert number of expected bytes field from big endian 32 bit
313 		 * to machine native
314 		 */
315 		expected = be32_to_cpu(*(__be32 *) (buf + 2));
316 		if (expected > count || expected < size) {
317 			dev_err(dev, "%s() expected > count\n", __func__);
318 			size = -EIO;
319 			continue;
320 		}
321 		rc = i2c_nuvoton_recv_data(client, chip, &buf[size],
322 					   expected - size);
323 		size += rc;
324 		if (rc < 0 || size < expected) {
325 			dev_err(dev, "%s() fail to read remainder of result\n",
326 				__func__);
327 			size = -EIO;
328 			continue;
329 		}
330 		if (i2c_nuvoton_wait_for_stat(
331 			    chip, TPM_STS_VALID | TPM_STS_DATA_AVAIL,
332 			    TPM_STS_VALID, chip->timeout_c,
333 			    NULL)) {
334 			dev_err(dev, "%s() error left over data\n", __func__);
335 			size = -ETIMEDOUT;
336 			continue;
337 		}
338 		break;
339 	}
340 	i2c_nuvoton_ready(chip);
341 	dev_dbg(&chip->dev, "%s() -> %d\n", __func__, size);
342 	return size;
343 }
344 
345 /*
346  * Send TPM command.
347  *
348  * If interrupts are used (signaled by an irq set in the vendor structure)
349  * tpm.c can skip polling for the data to be available as the interrupt is
350  * waited for here
351  */
352 static int i2c_nuvoton_send(struct tpm_chip *chip, u8 *buf, size_t len)
353 {
354 	struct priv_data *priv = dev_get_drvdata(&chip->dev);
355 	struct device *dev = chip->dev.parent;
356 	struct i2c_client *client = to_i2c_client(dev);
357 	u32 ordinal;
358 	unsigned long duration;
359 	size_t count = 0;
360 	int burst_count, bytes2write, retries, rc = -EIO;
361 
362 	for (retries = 0; retries < TPM_RETRY; retries++) {
363 		i2c_nuvoton_ready(chip);
364 		if (i2c_nuvoton_wait_for_stat(chip, TPM_STS_COMMAND_READY,
365 					      TPM_STS_COMMAND_READY,
366 					      chip->timeout_b, NULL)) {
367 			dev_err(dev, "%s() timeout on commandReady\n",
368 				__func__);
369 			rc = -EIO;
370 			continue;
371 		}
372 		rc = 0;
373 		while (count < len - 1) {
374 			burst_count = i2c_nuvoton_get_burstcount(client,
375 								 chip);
376 			if (burst_count < 0) {
377 				dev_err(dev, "%s() fail get burstCount\n",
378 					__func__);
379 				rc = -EIO;
380 				break;
381 			}
382 			bytes2write = min_t(size_t, burst_count,
383 					    len - 1 - count);
384 			rc = i2c_nuvoton_write_buf(client, TPM_DATA_FIFO_W,
385 						   bytes2write, &buf[count]);
386 			if (rc < 0) {
387 				dev_err(dev, "%s() fail i2cWriteBuf\n",
388 					__func__);
389 				break;
390 			}
391 			dev_dbg(dev, "%s(%d):", __func__, bytes2write);
392 			count += bytes2write;
393 			rc = i2c_nuvoton_wait_for_stat(chip,
394 						       TPM_STS_VALID |
395 						       TPM_STS_EXPECT,
396 						       TPM_STS_VALID |
397 						       TPM_STS_EXPECT,
398 						       chip->timeout_c,
399 						       NULL);
400 			if (rc < 0) {
401 				dev_err(dev, "%s() timeout on Expect\n",
402 					__func__);
403 				rc = -ETIMEDOUT;
404 				break;
405 			}
406 		}
407 		if (rc < 0)
408 			continue;
409 
410 		/* write last byte */
411 		rc = i2c_nuvoton_write_buf(client, TPM_DATA_FIFO_W, 1,
412 					   &buf[count]);
413 		if (rc < 0) {
414 			dev_err(dev, "%s() fail to write last byte\n",
415 				__func__);
416 			rc = -EIO;
417 			continue;
418 		}
419 		dev_dbg(dev, "%s(last): %02x", __func__, buf[count]);
420 		rc = i2c_nuvoton_wait_for_stat(chip,
421 					       TPM_STS_VALID | TPM_STS_EXPECT,
422 					       TPM_STS_VALID,
423 					       chip->timeout_c, NULL);
424 		if (rc) {
425 			dev_err(dev, "%s() timeout on Expect to clear\n",
426 				__func__);
427 			rc = -ETIMEDOUT;
428 			continue;
429 		}
430 		break;
431 	}
432 	if (rc < 0) {
433 		/* retries == TPM_RETRY */
434 		i2c_nuvoton_ready(chip);
435 		return rc;
436 	}
437 	/* execute the TPM command */
438 	rc = i2c_nuvoton_write_status(client, TPM_STS_GO);
439 	if (rc < 0) {
440 		dev_err(dev, "%s() fail to write Go\n", __func__);
441 		i2c_nuvoton_ready(chip);
442 		return rc;
443 	}
444 	ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
445 	duration = tpm_calc_ordinal_duration(chip, ordinal);
446 
447 	rc = i2c_nuvoton_wait_for_data_avail(chip, duration, &priv->read_queue);
448 	if (rc) {
449 		dev_err(dev, "%s() timeout command duration %ld\n",
450 			__func__, duration);
451 		i2c_nuvoton_ready(chip);
452 		return rc;
453 	}
454 
455 	dev_dbg(dev, "%s() -> %zd\n", __func__, len);
456 	return 0;
457 }
458 
459 static bool i2c_nuvoton_req_canceled(struct tpm_chip *chip, u8 status)
460 {
461 	return (status == TPM_STS_COMMAND_READY);
462 }
463 
464 static const struct tpm_class_ops tpm_i2c = {
465 	.flags = TPM_OPS_AUTO_STARTUP,
466 	.status = i2c_nuvoton_read_status,
467 	.recv = i2c_nuvoton_recv,
468 	.send = i2c_nuvoton_send,
469 	.cancel = i2c_nuvoton_ready,
470 	.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
471 	.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
472 	.req_canceled = i2c_nuvoton_req_canceled,
473 };
474 
475 /* The only purpose for the handler is to signal to any waiting threads that
476  * the interrupt is currently being asserted. The driver does not do any
477  * processing triggered by interrupts, and the chip provides no way to mask at
478  * the source (plus that would be slow over I2C). Run the IRQ as a one-shot,
479  * this means it cannot be shared. */
480 static irqreturn_t i2c_nuvoton_int_handler(int dummy, void *dev_id)
481 {
482 	struct tpm_chip *chip = dev_id;
483 	struct priv_data *priv = dev_get_drvdata(&chip->dev);
484 
485 	priv->intrs++;
486 	wake_up(&priv->read_queue);
487 	disable_irq_nosync(priv->irq);
488 	return IRQ_HANDLED;
489 }
490 
491 static int get_vid(struct i2c_client *client, u32 *res)
492 {
493 	static const u8 vid_did_rid_value[] = { 0x50, 0x10, 0xfe };
494 	u32 temp;
495 	s32 rc;
496 
497 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
498 		return -ENODEV;
499 	rc = i2c_nuvoton_read_buf(client, TPM_VID_DID_RID, 4, (u8 *)&temp);
500 	if (rc < 0)
501 		return rc;
502 
503 	/* check WPCT301 values - ignore RID */
504 	if (memcmp(&temp, vid_did_rid_value, sizeof(vid_did_rid_value))) {
505 		/*
506 		 * f/w rev 2.81 has an issue where the VID_DID_RID is not
507 		 * reporting the right value. so give it another chance at
508 		 * offset 0x20 (FIFO_W).
509 		 */
510 		rc = i2c_nuvoton_read_buf(client, TPM_DATA_FIFO_W, 4,
511 					  (u8 *) (&temp));
512 		if (rc < 0)
513 			return rc;
514 
515 		/* check WPCT301 values - ignore RID */
516 		if (memcmp(&temp, vid_did_rid_value,
517 			   sizeof(vid_did_rid_value)))
518 			return -ENODEV;
519 	}
520 
521 	*res = temp;
522 	return 0;
523 }
524 
525 static int i2c_nuvoton_probe(struct i2c_client *client,
526 			     const struct i2c_device_id *id)
527 {
528 	int rc;
529 	struct tpm_chip *chip;
530 	struct device *dev = &client->dev;
531 	struct priv_data *priv;
532 	u32 vid = 0;
533 
534 	rc = get_vid(client, &vid);
535 	if (rc)
536 		return rc;
537 
538 	dev_info(dev, "VID: %04X DID: %02X RID: %02X\n", (u16) vid,
539 		 (u8) (vid >> 16), (u8) (vid >> 24));
540 
541 	chip = tpmm_chip_alloc(dev, &tpm_i2c);
542 	if (IS_ERR(chip))
543 		return PTR_ERR(chip);
544 
545 	priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
546 	if (!priv)
547 		return -ENOMEM;
548 
549 	if (dev->of_node) {
550 		const struct of_device_id *of_id;
551 
552 		of_id = of_match_device(dev->driver->of_match_table, dev);
553 		if (of_id && of_id->data == OF_IS_TPM2)
554 			chip->flags |= TPM_CHIP_FLAG_TPM2;
555 	} else
556 		if (id->driver_data == I2C_IS_TPM2)
557 			chip->flags |= TPM_CHIP_FLAG_TPM2;
558 
559 	init_waitqueue_head(&priv->read_queue);
560 
561 	/* Default timeouts */
562 	chip->timeout_a = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
563 	chip->timeout_b = msecs_to_jiffies(TPM_I2C_LONG_TIMEOUT);
564 	chip->timeout_c = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
565 	chip->timeout_d = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
566 
567 	dev_set_drvdata(&chip->dev, priv);
568 
569 	/*
570 	 * I2C intfcaps (interrupt capabilitieis) in the chip are hard coded to:
571 	 *   TPM_INTF_INT_LEVEL_LOW | TPM_INTF_DATA_AVAIL_INT
572 	 * The IRQ should be set in the i2c_board_info (which is done
573 	 * automatically in of_i2c_register_devices, for device tree users */
574 	priv->irq = client->irq;
575 	if (client->irq) {
576 		dev_dbg(dev, "%s() priv->irq\n", __func__);
577 		rc = devm_request_irq(dev, client->irq,
578 				      i2c_nuvoton_int_handler,
579 				      IRQF_TRIGGER_LOW,
580 				      dev_name(&chip->dev),
581 				      chip);
582 		if (rc) {
583 			dev_err(dev, "%s() Unable to request irq: %d for use\n",
584 				__func__, priv->irq);
585 			priv->irq = 0;
586 		} else {
587 			chip->flags |= TPM_CHIP_FLAG_IRQ;
588 			/* Clear any pending interrupt */
589 			i2c_nuvoton_ready(chip);
590 			/* - wait for TPM_STS==0xA0 (stsValid, commandReady) */
591 			rc = i2c_nuvoton_wait_for_stat(chip,
592 						       TPM_STS_COMMAND_READY,
593 						       TPM_STS_COMMAND_READY,
594 						       chip->timeout_b,
595 						       NULL);
596 			if (rc == 0) {
597 				/*
598 				 * TIS is in ready state
599 				 * write dummy byte to enter reception state
600 				 * TPM_DATA_FIFO_W <- rc (0)
601 				 */
602 				rc = i2c_nuvoton_write_buf(client,
603 							   TPM_DATA_FIFO_W,
604 							   1, (u8 *) (&rc));
605 				if (rc < 0)
606 					return rc;
607 				/* TPM_STS <- 0x40 (commandReady) */
608 				i2c_nuvoton_ready(chip);
609 			} else {
610 				/*
611 				 * timeout_b reached - command was
612 				 * aborted. TIS should now be in idle state -
613 				 * only TPM_STS_VALID should be set
614 				 */
615 				if (i2c_nuvoton_read_status(chip) !=
616 				    TPM_STS_VALID)
617 					return -EIO;
618 			}
619 		}
620 	}
621 
622 	return tpm_chip_register(chip);
623 }
624 
625 static int i2c_nuvoton_remove(struct i2c_client *client)
626 {
627 	struct tpm_chip *chip = i2c_get_clientdata(client);
628 
629 	tpm_chip_unregister(chip);
630 	return 0;
631 }
632 
633 static const struct i2c_device_id i2c_nuvoton_id[] = {
634 	{"tpm_i2c_nuvoton"},
635 	{"tpm2_i2c_nuvoton", .driver_data = I2C_IS_TPM2},
636 	{}
637 };
638 MODULE_DEVICE_TABLE(i2c, i2c_nuvoton_id);
639 
640 #ifdef CONFIG_OF
641 static const struct of_device_id i2c_nuvoton_of_match[] = {
642 	{.compatible = "nuvoton,npct501"},
643 	{.compatible = "winbond,wpct301"},
644 	{.compatible = "nuvoton,npct601", .data = OF_IS_TPM2},
645 	{},
646 };
647 MODULE_DEVICE_TABLE(of, i2c_nuvoton_of_match);
648 #endif
649 
650 static SIMPLE_DEV_PM_OPS(i2c_nuvoton_pm_ops, tpm_pm_suspend, tpm_pm_resume);
651 
652 static struct i2c_driver i2c_nuvoton_driver = {
653 	.id_table = i2c_nuvoton_id,
654 	.probe = i2c_nuvoton_probe,
655 	.remove = i2c_nuvoton_remove,
656 	.driver = {
657 		.name = "tpm_i2c_nuvoton",
658 		.pm = &i2c_nuvoton_pm_ops,
659 		.of_match_table = of_match_ptr(i2c_nuvoton_of_match),
660 	},
661 };
662 
663 module_i2c_driver(i2c_nuvoton_driver);
664 
665 MODULE_AUTHOR("Dan Morav (dan.morav@nuvoton.com)");
666 MODULE_DESCRIPTION("Nuvoton TPM I2C Driver");
667 MODULE_LICENSE("GPL");
668