1 /* 2 * Copyright (C) 2012,2013 Infineon Technologies 3 * 4 * Authors: 5 * Peter Huewe <peter.huewe@infineon.com> 6 * 7 * Device driver for TCG/TCPA TPM (trusted platform module). 8 * Specifications at www.trustedcomputinggroup.org 9 * 10 * This device driver implements the TPM interface as defined in 11 * the TCG TPM Interface Spec version 1.2, revision 1.0 and the 12 * Infineon I2C Protocol Stack Specification v0.20. 13 * 14 * It is based on the original tpm_tis device driver from Leendert van 15 * Dorn and Kyleen Hall. 16 * 17 * This program is free software; you can redistribute it and/or 18 * modify it under the terms of the GNU General Public License as 19 * published by the Free Software Foundation, version 2 of the 20 * License. 21 * 22 * 23 */ 24 #include <linux/i2c.h> 25 #include <linux/module.h> 26 #include <linux/wait.h> 27 #include "tpm.h" 28 29 /* max. buffer size supported by our TPM */ 30 #define TPM_BUFSIZE 1260 31 32 /* max. number of iterations after I2C NAK */ 33 #define MAX_COUNT 3 34 35 #define SLEEP_DURATION_LOW 55 36 #define SLEEP_DURATION_HI 65 37 38 /* max. number of iterations after I2C NAK for 'long' commands 39 * we need this especially for sending TPM_READY, since the cleanup after the 40 * transtion to the ready state may take some time, but it is unpredictable 41 * how long it will take. 42 */ 43 #define MAX_COUNT_LONG 50 44 45 #define SLEEP_DURATION_LONG_LOW 200 46 #define SLEEP_DURATION_LONG_HI 220 47 48 /* After sending TPM_READY to 'reset' the TPM we have to sleep even longer */ 49 #define SLEEP_DURATION_RESET_LOW 2400 50 #define SLEEP_DURATION_RESET_HI 2600 51 52 /* we want to use usleep_range instead of msleep for the 5ms TPM_TIMEOUT */ 53 #define TPM_TIMEOUT_US_LOW (TPM_TIMEOUT * 1000) 54 #define TPM_TIMEOUT_US_HI (TPM_TIMEOUT_US_LOW + 2000) 55 56 /* expected value for DIDVID register */ 57 #define TPM_TIS_I2C_DID_VID_9635 0xd1150b00L 58 #define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L 59 60 enum i2c_chip_type { 61 SLB9635, 62 SLB9645, 63 UNKNOWN, 64 }; 65 66 /* Structure to store I2C TPM specific stuff */ 67 struct tpm_inf_dev { 68 struct i2c_client *client; 69 u8 buf[TPM_BUFSIZE + sizeof(u8)]; /* max. buffer size + addr */ 70 struct tpm_chip *chip; 71 enum i2c_chip_type chip_type; 72 }; 73 74 static struct tpm_inf_dev tpm_dev; 75 76 /* 77 * iic_tpm_read() - read from TPM register 78 * @addr: register address to read from 79 * @buffer: provided by caller 80 * @len: number of bytes to read 81 * 82 * Read len bytes from TPM register and put them into 83 * buffer (little-endian format, i.e. first byte is put into buffer[0]). 84 * 85 * NOTE: TPM is big-endian for multi-byte values. Multi-byte 86 * values have to be swapped. 87 * 88 * NOTE: We can't unfortunately use the combined read/write functions 89 * provided by the i2c core as the TPM currently does not support the 90 * repeated start condition and due to it's special requirements. 91 * The i2c_smbus* functions do not work for this chip. 92 * 93 * Return -EIO on error, 0 on success. 94 */ 95 static int iic_tpm_read(u8 addr, u8 *buffer, size_t len) 96 { 97 98 struct i2c_msg msg1 = { 99 .addr = tpm_dev.client->addr, 100 .len = 1, 101 .buf = &addr 102 }; 103 struct i2c_msg msg2 = { 104 .addr = tpm_dev.client->addr, 105 .flags = I2C_M_RD, 106 .len = len, 107 .buf = buffer 108 }; 109 struct i2c_msg msgs[] = {msg1, msg2}; 110 111 int rc = 0; 112 int count; 113 114 /* Lock the adapter for the duration of the whole sequence. */ 115 if (!tpm_dev.client->adapter->algo->master_xfer) 116 return -EOPNOTSUPP; 117 i2c_lock_adapter(tpm_dev.client->adapter); 118 119 if (tpm_dev.chip_type == SLB9645) { 120 /* use a combined read for newer chips 121 * unfortunately the smbus functions are not suitable due to 122 * the 32 byte limit of the smbus. 123 * retries should usually not be needed, but are kept just to 124 * be on the safe side. 125 */ 126 for (count = 0; count < MAX_COUNT; count++) { 127 rc = __i2c_transfer(tpm_dev.client->adapter, msgs, 2); 128 if (rc > 0) 129 break; /* break here to skip sleep */ 130 usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); 131 } 132 } else { 133 /* slb9635 protocol should work in all cases */ 134 for (count = 0; count < MAX_COUNT; count++) { 135 rc = __i2c_transfer(tpm_dev.client->adapter, &msg1, 1); 136 if (rc > 0) 137 break; /* break here to skip sleep */ 138 139 usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); 140 } 141 142 if (rc <= 0) 143 goto out; 144 145 /* After the TPM has successfully received the register address 146 * it needs some time, thus we're sleeping here again, before 147 * retrieving the data 148 */ 149 for (count = 0; count < MAX_COUNT; count++) { 150 usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); 151 rc = __i2c_transfer(tpm_dev.client->adapter, &msg2, 1); 152 if (rc > 0) 153 break; 154 } 155 } 156 157 out: 158 i2c_unlock_adapter(tpm_dev.client->adapter); 159 /* take care of 'guard time' */ 160 usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); 161 162 /* __i2c_transfer returns the number of successfully transferred 163 * messages. 164 * So rc should be greater than 0 here otherwise we have an error. 165 */ 166 if (rc <= 0) 167 return -EIO; 168 169 return 0; 170 } 171 172 static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len, 173 unsigned int sleep_low, 174 unsigned int sleep_hi, u8 max_count) 175 { 176 int rc = -EIO; 177 int count; 178 179 struct i2c_msg msg1 = { 180 .addr = tpm_dev.client->addr, 181 .len = len + 1, 182 .buf = tpm_dev.buf 183 }; 184 185 if (len > TPM_BUFSIZE) 186 return -EINVAL; 187 188 if (!tpm_dev.client->adapter->algo->master_xfer) 189 return -EOPNOTSUPP; 190 i2c_lock_adapter(tpm_dev.client->adapter); 191 192 /* prepend the 'register address' to the buffer */ 193 tpm_dev.buf[0] = addr; 194 memcpy(&(tpm_dev.buf[1]), buffer, len); 195 196 /* 197 * NOTE: We have to use these special mechanisms here and unfortunately 198 * cannot rely on the standard behavior of i2c_transfer. 199 * Even for newer chips the smbus functions are not 200 * suitable due to the 32 byte limit of the smbus. 201 */ 202 for (count = 0; count < max_count; count++) { 203 rc = __i2c_transfer(tpm_dev.client->adapter, &msg1, 1); 204 if (rc > 0) 205 break; 206 usleep_range(sleep_low, sleep_hi); 207 } 208 209 i2c_unlock_adapter(tpm_dev.client->adapter); 210 /* take care of 'guard time' */ 211 usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); 212 213 /* __i2c_transfer returns the number of successfully transferred 214 * messages. 215 * So rc should be greater than 0 here otherwise we have an error. 216 */ 217 if (rc <= 0) 218 return -EIO; 219 220 return 0; 221 } 222 223 /* 224 * iic_tpm_write() - write to TPM register 225 * @addr: register address to write to 226 * @buffer: containing data to be written 227 * @len: number of bytes to write 228 * 229 * Write len bytes from provided buffer to TPM register (little 230 * endian format, i.e. buffer[0] is written as first byte). 231 * 232 * NOTE: TPM is big-endian for multi-byte values. Multi-byte 233 * values have to be swapped. 234 * 235 * NOTE: use this function instead of the iic_tpm_write_generic function. 236 * 237 * Return -EIO on error, 0 on success 238 */ 239 static int iic_tpm_write(u8 addr, u8 *buffer, size_t len) 240 { 241 return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LOW, 242 SLEEP_DURATION_HI, MAX_COUNT); 243 } 244 245 /* 246 * This function is needed especially for the cleanup situation after 247 * sending TPM_READY 248 * */ 249 static int iic_tpm_write_long(u8 addr, u8 *buffer, size_t len) 250 { 251 return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LONG_LOW, 252 SLEEP_DURATION_LONG_HI, MAX_COUNT_LONG); 253 } 254 255 enum tis_access { 256 TPM_ACCESS_VALID = 0x80, 257 TPM_ACCESS_ACTIVE_LOCALITY = 0x20, 258 TPM_ACCESS_REQUEST_PENDING = 0x04, 259 TPM_ACCESS_REQUEST_USE = 0x02, 260 }; 261 262 enum tis_status { 263 TPM_STS_VALID = 0x80, 264 TPM_STS_COMMAND_READY = 0x40, 265 TPM_STS_GO = 0x20, 266 TPM_STS_DATA_AVAIL = 0x10, 267 TPM_STS_DATA_EXPECT = 0x08, 268 }; 269 270 enum tis_defaults { 271 TIS_SHORT_TIMEOUT = 750, /* ms */ 272 TIS_LONG_TIMEOUT = 2000, /* 2 sec */ 273 }; 274 275 #define TPM_ACCESS(l) (0x0000 | ((l) << 4)) 276 #define TPM_STS(l) (0x0001 | ((l) << 4)) 277 #define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4)) 278 #define TPM_DID_VID(l) (0x0006 | ((l) << 4)) 279 280 static int check_locality(struct tpm_chip *chip, int loc) 281 { 282 u8 buf; 283 int rc; 284 285 rc = iic_tpm_read(TPM_ACCESS(loc), &buf, 1); 286 if (rc < 0) 287 return rc; 288 289 if ((buf & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == 290 (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) { 291 chip->vendor.locality = loc; 292 return loc; 293 } 294 295 return -EIO; 296 } 297 298 /* implementation similar to tpm_tis */ 299 static void release_locality(struct tpm_chip *chip, int loc, int force) 300 { 301 u8 buf; 302 if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0) 303 return; 304 305 if (force || (buf & (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) == 306 (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) { 307 buf = TPM_ACCESS_ACTIVE_LOCALITY; 308 iic_tpm_write(TPM_ACCESS(loc), &buf, 1); 309 } 310 } 311 312 static int request_locality(struct tpm_chip *chip, int loc) 313 { 314 unsigned long stop; 315 u8 buf = TPM_ACCESS_REQUEST_USE; 316 317 if (check_locality(chip, loc) >= 0) 318 return loc; 319 320 iic_tpm_write(TPM_ACCESS(loc), &buf, 1); 321 322 /* wait for burstcount */ 323 stop = jiffies + chip->vendor.timeout_a; 324 do { 325 if (check_locality(chip, loc) >= 0) 326 return loc; 327 usleep_range(TPM_TIMEOUT_US_LOW, TPM_TIMEOUT_US_HI); 328 } while (time_before(jiffies, stop)); 329 330 return -ETIME; 331 } 332 333 static u8 tpm_tis_i2c_status(struct tpm_chip *chip) 334 { 335 /* NOTE: since I2C read may fail, return 0 in this case --> time-out */ 336 u8 buf = 0xFF; 337 u8 i = 0; 338 339 do { 340 if (iic_tpm_read(TPM_STS(chip->vendor.locality), &buf, 1) < 0) 341 return 0; 342 343 i++; 344 /* if locallity is set STS should not be 0xFF */ 345 } while ((buf == 0xFF) && i < 10); 346 347 return buf; 348 } 349 350 static void tpm_tis_i2c_ready(struct tpm_chip *chip) 351 { 352 /* this causes the current command to be aborted */ 353 u8 buf = TPM_STS_COMMAND_READY; 354 iic_tpm_write_long(TPM_STS(chip->vendor.locality), &buf, 1); 355 } 356 357 static ssize_t get_burstcount(struct tpm_chip *chip) 358 { 359 unsigned long stop; 360 ssize_t burstcnt; 361 u8 buf[3]; 362 363 /* wait for burstcount */ 364 /* which timeout value, spec has 2 answers (c & d) */ 365 stop = jiffies + chip->vendor.timeout_d; 366 do { 367 /* Note: STS is little endian */ 368 if (iic_tpm_read(TPM_STS(chip->vendor.locality)+1, buf, 3) < 0) 369 burstcnt = 0; 370 else 371 burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0]; 372 373 if (burstcnt) 374 return burstcnt; 375 376 usleep_range(TPM_TIMEOUT_US_LOW, TPM_TIMEOUT_US_HI); 377 } while (time_before(jiffies, stop)); 378 return -EBUSY; 379 } 380 381 static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, 382 int *status) 383 { 384 unsigned long stop; 385 386 /* check current status */ 387 *status = tpm_tis_i2c_status(chip); 388 if ((*status != 0xFF) && (*status & mask) == mask) 389 return 0; 390 391 stop = jiffies + timeout; 392 do { 393 /* since we just checked the status, give the TPM some time */ 394 usleep_range(TPM_TIMEOUT_US_LOW, TPM_TIMEOUT_US_HI); 395 *status = tpm_tis_i2c_status(chip); 396 if ((*status & mask) == mask) 397 return 0; 398 399 } while (time_before(jiffies, stop)); 400 401 return -ETIME; 402 } 403 404 static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) 405 { 406 size_t size = 0; 407 ssize_t burstcnt; 408 u8 retries = 0; 409 int rc; 410 411 while (size < count) { 412 burstcnt = get_burstcount(chip); 413 414 /* burstcnt < 0 = TPM is busy */ 415 if (burstcnt < 0) 416 return burstcnt; 417 418 /* limit received data to max. left */ 419 if (burstcnt > (count - size)) 420 burstcnt = count - size; 421 422 rc = iic_tpm_read(TPM_DATA_FIFO(chip->vendor.locality), 423 &(buf[size]), burstcnt); 424 if (rc == 0) 425 size += burstcnt; 426 else if (rc < 0) 427 retries++; 428 429 /* avoid endless loop in case of broken HW */ 430 if (retries > MAX_COUNT_LONG) 431 return -EIO; 432 } 433 return size; 434 } 435 436 static int tpm_tis_i2c_recv(struct tpm_chip *chip, u8 *buf, size_t count) 437 { 438 int size = 0; 439 int expected, status; 440 441 if (count < TPM_HEADER_SIZE) { 442 size = -EIO; 443 goto out; 444 } 445 446 /* read first 10 bytes, including tag, paramsize, and result */ 447 size = recv_data(chip, buf, TPM_HEADER_SIZE); 448 if (size < TPM_HEADER_SIZE) { 449 dev_err(chip->pdev, "Unable to read header\n"); 450 goto out; 451 } 452 453 expected = be32_to_cpu(*(__be32 *)(buf + 2)); 454 if ((size_t) expected > count) { 455 size = -EIO; 456 goto out; 457 } 458 459 size += recv_data(chip, &buf[TPM_HEADER_SIZE], 460 expected - TPM_HEADER_SIZE); 461 if (size < expected) { 462 dev_err(chip->pdev, "Unable to read remainder of result\n"); 463 size = -ETIME; 464 goto out; 465 } 466 467 wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status); 468 if (status & TPM_STS_DATA_AVAIL) { /* retry? */ 469 dev_err(chip->pdev, "Error left over data\n"); 470 size = -EIO; 471 goto out; 472 } 473 474 out: 475 tpm_tis_i2c_ready(chip); 476 /* The TPM needs some time to clean up here, 477 * so we sleep rather than keeping the bus busy 478 */ 479 usleep_range(SLEEP_DURATION_RESET_LOW, SLEEP_DURATION_RESET_HI); 480 release_locality(chip, chip->vendor.locality, 0); 481 return size; 482 } 483 484 static int tpm_tis_i2c_send(struct tpm_chip *chip, u8 *buf, size_t len) 485 { 486 int rc, status; 487 ssize_t burstcnt; 488 size_t count = 0; 489 u8 retries = 0; 490 u8 sts = TPM_STS_GO; 491 492 if (len > TPM_BUFSIZE) 493 return -E2BIG; /* command is too long for our tpm, sorry */ 494 495 if (request_locality(chip, 0) < 0) 496 return -EBUSY; 497 498 status = tpm_tis_i2c_status(chip); 499 if ((status & TPM_STS_COMMAND_READY) == 0) { 500 tpm_tis_i2c_ready(chip); 501 if (wait_for_stat 502 (chip, TPM_STS_COMMAND_READY, 503 chip->vendor.timeout_b, &status) < 0) { 504 rc = -ETIME; 505 goto out_err; 506 } 507 } 508 509 while (count < len - 1) { 510 burstcnt = get_burstcount(chip); 511 512 /* burstcnt < 0 = TPM is busy */ 513 if (burstcnt < 0) 514 return burstcnt; 515 516 if (burstcnt > (len - 1 - count)) 517 burstcnt = len - 1 - count; 518 519 rc = iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), 520 &(buf[count]), burstcnt); 521 if (rc == 0) 522 count += burstcnt; 523 else if (rc < 0) 524 retries++; 525 526 /* avoid endless loop in case of broken HW */ 527 if (retries > MAX_COUNT_LONG) { 528 rc = -EIO; 529 goto out_err; 530 } 531 532 wait_for_stat(chip, TPM_STS_VALID, 533 chip->vendor.timeout_c, &status); 534 535 if ((status & TPM_STS_DATA_EXPECT) == 0) { 536 rc = -EIO; 537 goto out_err; 538 } 539 } 540 541 /* write last byte */ 542 iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), &(buf[count]), 1); 543 wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status); 544 if ((status & TPM_STS_DATA_EXPECT) != 0) { 545 rc = -EIO; 546 goto out_err; 547 } 548 549 /* go and do it */ 550 iic_tpm_write(TPM_STS(chip->vendor.locality), &sts, 1); 551 552 return len; 553 out_err: 554 tpm_tis_i2c_ready(chip); 555 /* The TPM needs some time to clean up here, 556 * so we sleep rather than keeping the bus busy 557 */ 558 usleep_range(SLEEP_DURATION_RESET_LOW, SLEEP_DURATION_RESET_HI); 559 release_locality(chip, chip->vendor.locality, 0); 560 return rc; 561 } 562 563 static bool tpm_tis_i2c_req_canceled(struct tpm_chip *chip, u8 status) 564 { 565 return (status == TPM_STS_COMMAND_READY); 566 } 567 568 static const struct tpm_class_ops tpm_tis_i2c = { 569 .status = tpm_tis_i2c_status, 570 .recv = tpm_tis_i2c_recv, 571 .send = tpm_tis_i2c_send, 572 .cancel = tpm_tis_i2c_ready, 573 .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID, 574 .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID, 575 .req_canceled = tpm_tis_i2c_req_canceled, 576 }; 577 578 static int tpm_tis_i2c_init(struct device *dev) 579 { 580 u32 vendor; 581 int rc = 0; 582 struct tpm_chip *chip; 583 584 chip = tpmm_chip_alloc(dev, &tpm_tis_i2c); 585 if (IS_ERR(chip)) 586 return PTR_ERR(chip); 587 588 /* Disable interrupts */ 589 chip->vendor.irq = 0; 590 591 /* Default timeouts */ 592 chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT); 593 chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT); 594 chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT); 595 chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT); 596 597 if (request_locality(chip, 0) != 0) { 598 dev_err(dev, "could not request locality\n"); 599 rc = -ENODEV; 600 goto out_err; 601 } 602 603 /* read four bytes from DID_VID register */ 604 if (iic_tpm_read(TPM_DID_VID(0), (u8 *)&vendor, 4) < 0) { 605 dev_err(dev, "could not read vendor id\n"); 606 rc = -EIO; 607 goto out_release; 608 } 609 610 if (vendor == TPM_TIS_I2C_DID_VID_9645) { 611 tpm_dev.chip_type = SLB9645; 612 } else if (vendor == TPM_TIS_I2C_DID_VID_9635) { 613 tpm_dev.chip_type = SLB9635; 614 } else { 615 dev_err(dev, "vendor id did not match! ID was %08x\n", vendor); 616 rc = -ENODEV; 617 goto out_release; 618 } 619 620 dev_info(dev, "1.2 TPM (device-id 0x%X)\n", vendor >> 16); 621 622 INIT_LIST_HEAD(&chip->vendor.list); 623 tpm_dev.chip = chip; 624 625 tpm_get_timeouts(chip); 626 tpm_do_selftest(chip); 627 628 return tpm_chip_register(chip); 629 out_release: 630 release_locality(chip, chip->vendor.locality, 1); 631 tpm_dev.client = NULL; 632 out_err: 633 return rc; 634 } 635 636 static const struct i2c_device_id tpm_tis_i2c_table[] = { 637 {"tpm_i2c_infineon", 0}, 638 {"slb9635tt", 0}, 639 {"slb9645tt", 1}, 640 {}, 641 }; 642 643 MODULE_DEVICE_TABLE(i2c, tpm_tis_i2c_table); 644 645 #ifdef CONFIG_OF 646 static const struct of_device_id tpm_tis_i2c_of_match[] = { 647 { 648 .name = "tpm_i2c_infineon", 649 .type = "tpm", 650 .compatible = "infineon,tpm_i2c_infineon", 651 .data = (void *)0 652 }, 653 { 654 .name = "slb9635tt", 655 .type = "tpm", 656 .compatible = "infineon,slb9635tt", 657 .data = (void *)0 658 }, 659 { 660 .name = "slb9645tt", 661 .type = "tpm", 662 .compatible = "infineon,slb9645tt", 663 .data = (void *)1 664 }, 665 {}, 666 }; 667 MODULE_DEVICE_TABLE(of, tpm_tis_i2c_of_match); 668 #endif 669 670 static SIMPLE_DEV_PM_OPS(tpm_tis_i2c_ops, tpm_pm_suspend, tpm_pm_resume); 671 672 static int tpm_tis_i2c_probe(struct i2c_client *client, 673 const struct i2c_device_id *id) 674 { 675 int rc; 676 struct device *dev = &(client->dev); 677 678 if (tpm_dev.client != NULL) { 679 dev_err(dev, "This driver only supports one client at a time\n"); 680 return -EBUSY; /* We only support one client */ 681 } 682 683 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { 684 dev_err(dev, "no algorithms associated to the i2c bus\n"); 685 return -ENODEV; 686 } 687 688 tpm_dev.client = client; 689 rc = tpm_tis_i2c_init(&client->dev); 690 if (rc != 0) { 691 tpm_dev.client = NULL; 692 rc = -ENODEV; 693 } 694 return rc; 695 } 696 697 static int tpm_tis_i2c_remove(struct i2c_client *client) 698 { 699 struct tpm_chip *chip = tpm_dev.chip; 700 701 tpm_chip_unregister(chip); 702 release_locality(chip, chip->vendor.locality, 1); 703 tpm_dev.client = NULL; 704 705 return 0; 706 } 707 708 static struct i2c_driver tpm_tis_i2c_driver = { 709 .id_table = tpm_tis_i2c_table, 710 .probe = tpm_tis_i2c_probe, 711 .remove = tpm_tis_i2c_remove, 712 .driver = { 713 .name = "tpm_i2c_infineon", 714 .pm = &tpm_tis_i2c_ops, 715 .of_match_table = of_match_ptr(tpm_tis_i2c_of_match), 716 }, 717 }; 718 719 module_i2c_driver(tpm_tis_i2c_driver); 720 MODULE_AUTHOR("Peter Huewe <peter.huewe@infineon.com>"); 721 MODULE_DESCRIPTION("TPM TIS I2C Infineon Driver"); 722 MODULE_VERSION("2.2.0"); 723 MODULE_LICENSE("GPL"); 724