xref: /openbmc/linux/drivers/char/tpm/tpm_i2c_atmel.c (revision 77d84ff8)
1 /*
2  * ATMEL I2C TPM AT97SC3204T
3  *
4  * Copyright (C) 2012 V Lab Technologies
5  *  Teddy Reed <teddy@prosauce.org>
6  * Copyright (C) 2013, Obsidian Research Corp.
7  *  Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
8  * Device driver for ATMEL I2C TPMs.
9  *
10  * Teddy Reed determined the basic I2C command flow, unlike other I2C TPM
11  * devices the raw TCG formatted TPM command data is written via I2C and then
12  * raw TCG formatted TPM command data is returned via I2C.
13  *
14  * TGC status/locality/etc functions seen in the LPC implementation do not
15  * seem to be present.
16  *
17  * This program is free software: you can redistribute it and/or modify
18  * it under the terms of the GNU General Public License as published by
19  * the Free Software Foundation, either version 2 of the License, or
20  * (at your option) any later version.
21  *
22  * This program is distributed in the hope that it will be useful,
23  * but WITHOUT ANY WARRANTY; without even the implied warranty of
24  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
25  * GNU General Public License for more details.
26  *
27  * You should have received a copy of the GNU General Public License
28  * along with this program.  If not, see http://www.gnu.org/licenses/>.
29  */
30 #include <linux/init.h>
31 #include <linux/module.h>
32 #include <linux/moduleparam.h>
33 #include <linux/slab.h>
34 #include <linux/i2c.h>
35 #include "tpm.h"
36 
37 #define I2C_DRIVER_NAME "tpm_i2c_atmel"
38 
39 #define TPM_I2C_SHORT_TIMEOUT  750     /* ms */
40 #define TPM_I2C_LONG_TIMEOUT   2000    /* 2 sec */
41 
42 #define ATMEL_STS_OK 1
43 
44 struct priv_data {
45 	size_t len;
46 	/* This is the amount we read on the first try. 25 was chosen to fit a
47 	 * fair number of read responses in the buffer so a 2nd retry can be
48 	 * avoided in small message cases. */
49 	u8 buffer[sizeof(struct tpm_output_header) + 25];
50 };
51 
52 static int i2c_atmel_send(struct tpm_chip *chip, u8 *buf, size_t len)
53 {
54 	struct priv_data *priv = chip->vendor.priv;
55 	struct i2c_client *client = to_i2c_client(chip->dev);
56 	s32 status;
57 
58 	priv->len = 0;
59 
60 	if (len <= 2)
61 		return -EIO;
62 
63 	status = i2c_master_send(client, buf, len);
64 
65 	dev_dbg(chip->dev,
66 		"%s(buf=%*ph len=%0zx) -> sts=%d\n", __func__,
67 		(int)min_t(size_t, 64, len), buf, len, status);
68 	return status;
69 }
70 
71 static int i2c_atmel_recv(struct tpm_chip *chip, u8 *buf, size_t count)
72 {
73 	struct priv_data *priv = chip->vendor.priv;
74 	struct i2c_client *client = to_i2c_client(chip->dev);
75 	struct tpm_output_header *hdr =
76 		(struct tpm_output_header *)priv->buffer;
77 	u32 expected_len;
78 	int rc;
79 
80 	if (priv->len == 0)
81 		return -EIO;
82 
83 	/* Get the message size from the message header, if we didn't get the
84 	 * whole message in read_status then we need to re-read the
85 	 * message. */
86 	expected_len = be32_to_cpu(hdr->length);
87 	if (expected_len > count)
88 		return -ENOMEM;
89 
90 	if (priv->len >= expected_len) {
91 		dev_dbg(chip->dev,
92 			"%s early(buf=%*ph count=%0zx) -> ret=%d\n", __func__,
93 			(int)min_t(size_t, 64, expected_len), buf, count,
94 			expected_len);
95 		memcpy(buf, priv->buffer, expected_len);
96 		return expected_len;
97 	}
98 
99 	rc = i2c_master_recv(client, buf, expected_len);
100 	dev_dbg(chip->dev,
101 		"%s reread(buf=%*ph count=%0zx) -> ret=%d\n", __func__,
102 		(int)min_t(size_t, 64, expected_len), buf, count,
103 		expected_len);
104 	return rc;
105 }
106 
107 static void i2c_atmel_cancel(struct tpm_chip *chip)
108 {
109 	dev_err(chip->dev, "TPM operation cancellation was requested, but is not supported");
110 }
111 
112 static u8 i2c_atmel_read_status(struct tpm_chip *chip)
113 {
114 	struct priv_data *priv = chip->vendor.priv;
115 	struct i2c_client *client = to_i2c_client(chip->dev);
116 	int rc;
117 
118 	/* The TPM fails the I2C read until it is ready, so we do the entire
119 	 * transfer here and buffer it locally. This way the common code can
120 	 * properly handle the timeouts. */
121 	priv->len = 0;
122 	memset(priv->buffer, 0, sizeof(priv->buffer));
123 
124 
125 	/* Once the TPM has completed the command the command remains readable
126 	 * until another command is issued. */
127 	rc = i2c_master_recv(client, priv->buffer, sizeof(priv->buffer));
128 	dev_dbg(chip->dev,
129 		"%s: sts=%d", __func__, rc);
130 	if (rc <= 0)
131 		return 0;
132 
133 	priv->len = rc;
134 
135 	return ATMEL_STS_OK;
136 }
137 
138 static const struct file_operations i2c_atmel_ops = {
139 	.owner = THIS_MODULE,
140 	.llseek = no_llseek,
141 	.open = tpm_open,
142 	.read = tpm_read,
143 	.write = tpm_write,
144 	.release = tpm_release,
145 };
146 
147 static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
148 static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
149 static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL);
150 static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL);
151 static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL);
152 static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated, NULL);
153 static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL);
154 static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
155 static DEVICE_ATTR(durations, S_IRUGO, tpm_show_durations, NULL);
156 static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
157 
158 static struct attribute *i2c_atmel_attrs[] = {
159 	&dev_attr_pubek.attr,
160 	&dev_attr_pcrs.attr,
161 	&dev_attr_enabled.attr,
162 	&dev_attr_active.attr,
163 	&dev_attr_owned.attr,
164 	&dev_attr_temp_deactivated.attr,
165 	&dev_attr_caps.attr,
166 	&dev_attr_cancel.attr,
167 	&dev_attr_durations.attr,
168 	&dev_attr_timeouts.attr,
169 	NULL,
170 };
171 
172 static struct attribute_group i2c_atmel_attr_grp = {
173 	.attrs = i2c_atmel_attrs
174 };
175 
176 static bool i2c_atmel_req_canceled(struct tpm_chip *chip, u8 status)
177 {
178 	return 0;
179 }
180 
181 static const struct tpm_vendor_specific i2c_atmel = {
182 	.status = i2c_atmel_read_status,
183 	.recv = i2c_atmel_recv,
184 	.send = i2c_atmel_send,
185 	.cancel = i2c_atmel_cancel,
186 	.req_complete_mask = ATMEL_STS_OK,
187 	.req_complete_val = ATMEL_STS_OK,
188 	.req_canceled = i2c_atmel_req_canceled,
189 	.attr_group = &i2c_atmel_attr_grp,
190 	.miscdev.fops = &i2c_atmel_ops,
191 };
192 
193 static int i2c_atmel_probe(struct i2c_client *client,
194 			   const struct i2c_device_id *id)
195 {
196 	int rc;
197 	struct tpm_chip *chip;
198 	struct device *dev = &client->dev;
199 
200 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
201 		return -ENODEV;
202 
203 	chip = tpm_register_hardware(dev, &i2c_atmel);
204 	if (!chip) {
205 		dev_err(dev, "%s() error in tpm_register_hardware\n", __func__);
206 		return -ENODEV;
207 	}
208 
209 	chip->vendor.priv = devm_kzalloc(dev, sizeof(struct priv_data),
210 					 GFP_KERNEL);
211 
212 	/* Default timeouts */
213 	chip->vendor.timeout_a = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
214 	chip->vendor.timeout_b = msecs_to_jiffies(TPM_I2C_LONG_TIMEOUT);
215 	chip->vendor.timeout_c = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
216 	chip->vendor.timeout_d = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
217 	chip->vendor.irq = 0;
218 
219 	/* There is no known way to probe for this device, and all version
220 	 * information seems to be read via TPM commands. Thus we rely on the
221 	 * TPM startup process in the common code to detect the device. */
222 	if (tpm_get_timeouts(chip)) {
223 		rc = -ENODEV;
224 		goto out_err;
225 	}
226 
227 	if (tpm_do_selftest(chip)) {
228 		rc = -ENODEV;
229 		goto out_err;
230 	}
231 
232 	return 0;
233 
234 out_err:
235 	tpm_dev_vendor_release(chip);
236 	tpm_remove_hardware(chip->dev);
237 	return rc;
238 }
239 
240 static int i2c_atmel_remove(struct i2c_client *client)
241 {
242 	struct device *dev = &(client->dev);
243 	struct tpm_chip *chip = dev_get_drvdata(dev);
244 
245 	if (chip)
246 		tpm_dev_vendor_release(chip);
247 	tpm_remove_hardware(dev);
248 	kfree(chip);
249 	return 0;
250 }
251 
252 static const struct i2c_device_id i2c_atmel_id[] = {
253 	{I2C_DRIVER_NAME, 0},
254 	{}
255 };
256 MODULE_DEVICE_TABLE(i2c, i2c_atmel_id);
257 
258 #ifdef CONFIG_OF
259 static const struct of_device_id i2c_atmel_of_match[] = {
260 	{.compatible = "atmel,at97sc3204t"},
261 	{},
262 };
263 MODULE_DEVICE_TABLE(of, i2c_atmel_of_match);
264 #endif
265 
266 static SIMPLE_DEV_PM_OPS(i2c_atmel_pm_ops, tpm_pm_suspend, tpm_pm_resume);
267 
268 static struct i2c_driver i2c_atmel_driver = {
269 	.id_table = i2c_atmel_id,
270 	.probe = i2c_atmel_probe,
271 	.remove = i2c_atmel_remove,
272 	.driver = {
273 		.name = I2C_DRIVER_NAME,
274 		.owner = THIS_MODULE,
275 		.pm = &i2c_atmel_pm_ops,
276 		.of_match_table = of_match_ptr(i2c_atmel_of_match),
277 	},
278 };
279 
280 module_i2c_driver(i2c_atmel_driver);
281 
282 MODULE_AUTHOR("Jason Gunthorpe <jgunthorpe@obsidianresearch.com>");
283 MODULE_DESCRIPTION("Atmel TPM I2C Driver");
284 MODULE_LICENSE("GPL");
285