1 /* 2 * STMicroelectronics TPM SPI Linux driver for TPM ST33ZP24 3 * Copyright (C) 2009 - 2016 STMicroelectronics 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, see <http://www.gnu.org/licenses/>. 17 */ 18 19 #include <linux/module.h> 20 #include <linux/spi/spi.h> 21 #include <linux/gpio.h> 22 #include <linux/gpio/consumer.h> 23 #include <linux/of_irq.h> 24 #include <linux/of_gpio.h> 25 #include <linux/acpi.h> 26 #include <linux/tpm.h> 27 #include <linux/platform_data/st33zp24.h> 28 29 #include "../tpm.h" 30 #include "st33zp24.h" 31 32 #define TPM_DATA_FIFO 0x24 33 #define TPM_INTF_CAPABILITY 0x14 34 35 #define TPM_DUMMY_BYTE 0x00 36 37 #define MAX_SPI_LATENCY 15 38 #define LOCALITY0 0 39 40 #define ST33ZP24_OK 0x5A 41 #define ST33ZP24_UNDEFINED_ERR 0x80 42 #define ST33ZP24_BADLOCALITY 0x81 43 #define ST33ZP24_TISREGISTER_UNKNOWN 0x82 44 #define ST33ZP24_LOCALITY_NOT_ACTIVATED 0x83 45 #define ST33ZP24_HASH_END_BEFORE_HASH_START 0x84 46 #define ST33ZP24_BAD_COMMAND_ORDER 0x85 47 #define ST33ZP24_INCORECT_RECEIVED_LENGTH 0x86 48 #define ST33ZP24_TPM_FIFO_OVERFLOW 0x89 49 #define ST33ZP24_UNEXPECTED_READ_FIFO 0x8A 50 #define ST33ZP24_UNEXPECTED_WRITE_FIFO 0x8B 51 #define ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END 0x90 52 #define ST33ZP24_DUMMY_BYTES 0x00 53 54 /* 55 * TPM command can be up to 2048 byte, A TPM response can be up to 56 * 1024 byte. 57 * Between command and response, there are latency byte (up to 15 58 * usually on st33zp24 2 are enough). 59 * 60 * Overall when sending a command and expecting an answer we need if 61 * worst case: 62 * 2048 (for the TPM command) + 1024 (for the TPM answer). We need 63 * some latency byte before the answer is available (max 15). 64 * We have 2048 + 1024 + 15. 65 */ 66 #define ST33ZP24_SPI_BUFFER_SIZE (TPM_BUFSIZE + (TPM_BUFSIZE / 2) +\ 67 MAX_SPI_LATENCY) 68 69 70 struct st33zp24_spi_phy { 71 struct spi_device *spi_device; 72 73 u8 tx_buf[ST33ZP24_SPI_BUFFER_SIZE]; 74 u8 rx_buf[ST33ZP24_SPI_BUFFER_SIZE]; 75 76 int io_lpcpd; 77 int latency; 78 }; 79 80 static int st33zp24_status_to_errno(u8 code) 81 { 82 switch (code) { 83 case ST33ZP24_OK: 84 return 0; 85 case ST33ZP24_UNDEFINED_ERR: 86 case ST33ZP24_BADLOCALITY: 87 case ST33ZP24_TISREGISTER_UNKNOWN: 88 case ST33ZP24_LOCALITY_NOT_ACTIVATED: 89 case ST33ZP24_HASH_END_BEFORE_HASH_START: 90 case ST33ZP24_BAD_COMMAND_ORDER: 91 case ST33ZP24_UNEXPECTED_READ_FIFO: 92 case ST33ZP24_UNEXPECTED_WRITE_FIFO: 93 case ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END: 94 return -EPROTO; 95 case ST33ZP24_INCORECT_RECEIVED_LENGTH: 96 case ST33ZP24_TPM_FIFO_OVERFLOW: 97 return -EMSGSIZE; 98 case ST33ZP24_DUMMY_BYTES: 99 return -ENOSYS; 100 } 101 return code; 102 } 103 104 /* 105 * st33zp24_spi_send 106 * Send byte to the TIS register according to the ST33ZP24 SPI protocol. 107 * @param: phy_id, the phy description 108 * @param: tpm_register, the tpm tis register where the data should be written 109 * @param: tpm_data, the tpm_data to write inside the tpm_register 110 * @param: tpm_size, The length of the data 111 * @return: should be zero if success else a negative error code. 112 */ 113 static int st33zp24_spi_send(void *phy_id, u8 tpm_register, u8 *tpm_data, 114 int tpm_size) 115 { 116 int total_length = 0, ret = 0; 117 struct st33zp24_spi_phy *phy = phy_id; 118 struct spi_device *dev = phy->spi_device; 119 struct spi_transfer spi_xfer = { 120 .tx_buf = phy->tx_buf, 121 .rx_buf = phy->rx_buf, 122 }; 123 124 /* Pre-Header */ 125 phy->tx_buf[total_length++] = TPM_WRITE_DIRECTION | LOCALITY0; 126 phy->tx_buf[total_length++] = tpm_register; 127 128 if (tpm_size > 0 && tpm_register == TPM_DATA_FIFO) { 129 phy->tx_buf[total_length++] = tpm_size >> 8; 130 phy->tx_buf[total_length++] = tpm_size; 131 } 132 133 memcpy(&phy->tx_buf[total_length], tpm_data, tpm_size); 134 total_length += tpm_size; 135 136 memset(&phy->tx_buf[total_length], TPM_DUMMY_BYTE, phy->latency); 137 138 spi_xfer.len = total_length + phy->latency; 139 140 ret = spi_sync_transfer(dev, &spi_xfer, 1); 141 if (ret == 0) 142 ret = phy->rx_buf[total_length + phy->latency - 1]; 143 144 return st33zp24_status_to_errno(ret); 145 } /* st33zp24_spi_send() */ 146 147 /* 148 * st33zp24_spi_read8_recv 149 * Recv byte from the TIS register according to the ST33ZP24 SPI protocol. 150 * @param: phy_id, the phy description 151 * @param: tpm_register, the tpm tis register where the data should be read 152 * @param: tpm_data, the TPM response 153 * @param: tpm_size, tpm TPM response size to read. 154 * @return: should be zero if success else a negative error code. 155 */ 156 static int st33zp24_spi_read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, 157 int tpm_size) 158 { 159 int total_length = 0, ret; 160 struct st33zp24_spi_phy *phy = phy_id; 161 struct spi_device *dev = phy->spi_device; 162 struct spi_transfer spi_xfer = { 163 .tx_buf = phy->tx_buf, 164 .rx_buf = phy->rx_buf, 165 }; 166 167 /* Pre-Header */ 168 phy->tx_buf[total_length++] = LOCALITY0; 169 phy->tx_buf[total_length++] = tpm_register; 170 171 memset(&phy->tx_buf[total_length], TPM_DUMMY_BYTE, 172 phy->latency + tpm_size); 173 174 spi_xfer.len = total_length + phy->latency + tpm_size; 175 176 /* header + status byte + size of the data + status byte */ 177 ret = spi_sync_transfer(dev, &spi_xfer, 1); 178 if (tpm_size > 0 && ret == 0) { 179 ret = phy->rx_buf[total_length + phy->latency - 1]; 180 181 memcpy(tpm_data, phy->rx_buf + total_length + phy->latency, 182 tpm_size); 183 } 184 185 return ret; 186 } /* st33zp24_spi_read8_reg() */ 187 188 /* 189 * st33zp24_spi_recv 190 * Recv byte from the TIS register according to the ST33ZP24 SPI protocol. 191 * @param: phy_id, the phy description 192 * @param: tpm_register, the tpm tis register where the data should be read 193 * @param: tpm_data, the TPM response 194 * @param: tpm_size, tpm TPM response size to read. 195 * @return: number of byte read successfully: should be one if success. 196 */ 197 static int st33zp24_spi_recv(void *phy_id, u8 tpm_register, u8 *tpm_data, 198 int tpm_size) 199 { 200 int ret; 201 202 ret = st33zp24_spi_read8_reg(phy_id, tpm_register, tpm_data, tpm_size); 203 if (!st33zp24_status_to_errno(ret)) 204 return tpm_size; 205 return ret; 206 } /* st33zp24_spi_recv() */ 207 208 static int st33zp24_spi_evaluate_latency(void *phy_id) 209 { 210 struct st33zp24_spi_phy *phy = phy_id; 211 int latency = 1, status = 0; 212 u8 data = 0; 213 214 while (!status && latency < MAX_SPI_LATENCY) { 215 phy->latency = latency; 216 status = st33zp24_spi_read8_reg(phy_id, TPM_INTF_CAPABILITY, 217 &data, 1); 218 latency++; 219 } 220 if (status < 0) 221 return status; 222 if (latency == MAX_SPI_LATENCY) 223 return -ENODEV; 224 225 return latency - 1; 226 } /* evaluate_latency() */ 227 228 static const struct st33zp24_phy_ops spi_phy_ops = { 229 .send = st33zp24_spi_send, 230 .recv = st33zp24_spi_recv, 231 }; 232 233 static const struct acpi_gpio_params lpcpd_gpios = { 1, 0, false }; 234 235 static const struct acpi_gpio_mapping acpi_st33zp24_gpios[] = { 236 { "lpcpd-gpios", &lpcpd_gpios, 1 }, 237 {}, 238 }; 239 240 static int st33zp24_spi_acpi_request_resources(struct spi_device *spi_dev) 241 { 242 struct tpm_chip *chip = spi_get_drvdata(spi_dev); 243 struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); 244 struct st33zp24_spi_phy *phy = tpm_dev->phy_id; 245 struct gpio_desc *gpiod_lpcpd; 246 struct device *dev = &spi_dev->dev; 247 int ret; 248 249 ret = devm_acpi_dev_add_driver_gpios(dev, acpi_st33zp24_gpios); 250 if (ret) 251 return ret; 252 253 /* Get LPCPD GPIO from ACPI */ 254 gpiod_lpcpd = devm_gpiod_get(dev, "lpcpd", GPIOD_OUT_HIGH); 255 if (IS_ERR(gpiod_lpcpd)) { 256 dev_err(dev, "Failed to retrieve lpcpd-gpios from acpi.\n"); 257 phy->io_lpcpd = -1; 258 /* 259 * lpcpd pin is not specified. This is not an issue as 260 * power management can be also managed by TPM specific 261 * commands. So leave with a success status code. 262 */ 263 return 0; 264 } 265 266 phy->io_lpcpd = desc_to_gpio(gpiod_lpcpd); 267 268 return 0; 269 } 270 271 static int st33zp24_spi_of_request_resources(struct spi_device *spi_dev) 272 { 273 struct tpm_chip *chip = spi_get_drvdata(spi_dev); 274 struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); 275 struct st33zp24_spi_phy *phy = tpm_dev->phy_id; 276 struct device_node *pp; 277 int gpio; 278 int ret; 279 280 pp = spi_dev->dev.of_node; 281 if (!pp) { 282 dev_err(&spi_dev->dev, "No platform data\n"); 283 return -ENODEV; 284 } 285 286 /* Get GPIO from device tree */ 287 gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0); 288 if (gpio < 0) { 289 dev_err(&spi_dev->dev, 290 "Failed to retrieve lpcpd-gpios from dts.\n"); 291 phy->io_lpcpd = -1; 292 /* 293 * lpcpd pin is not specified. This is not an issue as 294 * power management can be also managed by TPM specific 295 * commands. So leave with a success status code. 296 */ 297 return 0; 298 } 299 /* GPIO request and configuration */ 300 ret = devm_gpio_request_one(&spi_dev->dev, gpio, 301 GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); 302 if (ret) { 303 dev_err(&spi_dev->dev, "Failed to request lpcpd pin\n"); 304 return -ENODEV; 305 } 306 phy->io_lpcpd = gpio; 307 308 return 0; 309 } 310 311 static int st33zp24_spi_request_resources(struct spi_device *dev) 312 { 313 struct tpm_chip *chip = spi_get_drvdata(dev); 314 struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); 315 struct st33zp24_spi_phy *phy = tpm_dev->phy_id; 316 struct st33zp24_platform_data *pdata; 317 int ret; 318 319 pdata = dev->dev.platform_data; 320 if (!pdata) { 321 dev_err(&dev->dev, "No platform data\n"); 322 return -ENODEV; 323 } 324 325 /* store for late use */ 326 phy->io_lpcpd = pdata->io_lpcpd; 327 328 if (gpio_is_valid(pdata->io_lpcpd)) { 329 ret = devm_gpio_request_one(&dev->dev, 330 pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, 331 "TPM IO_LPCPD"); 332 if (ret) { 333 dev_err(&dev->dev, "%s : reset gpio_request failed\n", 334 __FILE__); 335 return ret; 336 } 337 } 338 339 return 0; 340 } 341 342 /* 343 * st33zp24_spi_probe initialize the TPM device 344 * @param: dev, the spi_device drescription (TPM SPI description). 345 * @return: 0 in case of success. 346 * or a negative value describing the error. 347 */ 348 static int st33zp24_spi_probe(struct spi_device *dev) 349 { 350 int ret; 351 struct st33zp24_platform_data *pdata; 352 struct st33zp24_spi_phy *phy; 353 354 /* Check SPI platform functionnalities */ 355 if (!dev) { 356 pr_info("%s: dev is NULL. Device is not accessible.\n", 357 __func__); 358 return -ENODEV; 359 } 360 361 phy = devm_kzalloc(&dev->dev, sizeof(struct st33zp24_spi_phy), 362 GFP_KERNEL); 363 if (!phy) 364 return -ENOMEM; 365 366 phy->spi_device = dev; 367 368 pdata = dev->dev.platform_data; 369 if (!pdata && dev->dev.of_node) { 370 ret = st33zp24_spi_of_request_resources(dev); 371 if (ret) 372 return ret; 373 } else if (pdata) { 374 ret = st33zp24_spi_request_resources(dev); 375 if (ret) 376 return ret; 377 } else if (ACPI_HANDLE(&dev->dev)) { 378 ret = st33zp24_spi_acpi_request_resources(dev); 379 if (ret) 380 return ret; 381 } 382 383 phy->latency = st33zp24_spi_evaluate_latency(phy); 384 if (phy->latency <= 0) 385 return -ENODEV; 386 387 return st33zp24_probe(phy, &spi_phy_ops, &dev->dev, dev->irq, 388 phy->io_lpcpd); 389 } 390 391 /* 392 * st33zp24_spi_remove remove the TPM device 393 * @param: client, the spi_device drescription (TPM SPI description). 394 * @return: 0 in case of success. 395 */ 396 static int st33zp24_spi_remove(struct spi_device *dev) 397 { 398 struct tpm_chip *chip = spi_get_drvdata(dev); 399 int ret; 400 401 ret = st33zp24_remove(chip); 402 if (ret) 403 return ret; 404 405 return 0; 406 } 407 408 static const struct spi_device_id st33zp24_spi_id[] = { 409 {TPM_ST33_SPI, 0}, 410 {} 411 }; 412 MODULE_DEVICE_TABLE(spi, st33zp24_spi_id); 413 414 static const struct of_device_id of_st33zp24_spi_match[] = { 415 { .compatible = "st,st33zp24-spi", }, 416 {} 417 }; 418 MODULE_DEVICE_TABLE(of, of_st33zp24_spi_match); 419 420 static const struct acpi_device_id st33zp24_spi_acpi_match[] = { 421 {"SMO3324"}, 422 {} 423 }; 424 MODULE_DEVICE_TABLE(acpi, st33zp24_spi_acpi_match); 425 426 static SIMPLE_DEV_PM_OPS(st33zp24_spi_ops, st33zp24_pm_suspend, 427 st33zp24_pm_resume); 428 429 static struct spi_driver st33zp24_spi_driver = { 430 .driver = { 431 .name = TPM_ST33_SPI, 432 .pm = &st33zp24_spi_ops, 433 .of_match_table = of_match_ptr(of_st33zp24_spi_match), 434 .acpi_match_table = ACPI_PTR(st33zp24_spi_acpi_match), 435 }, 436 .probe = st33zp24_spi_probe, 437 .remove = st33zp24_spi_remove, 438 .id_table = st33zp24_spi_id, 439 }; 440 441 module_spi_driver(st33zp24_spi_driver); 442 443 MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)"); 444 MODULE_DESCRIPTION("STM TPM 1.2 SPI ST33 Driver"); 445 MODULE_VERSION("1.3.0"); 446 MODULE_LICENSE("GPL"); 447