1 /* linux/drivers/char/pc8736x_gpio.c 2 3 National Semiconductor PC8736x GPIO driver. Allows a user space 4 process to play with the GPIO pins. 5 6 Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com> 7 8 adapted from linux/drivers/char/scx200_gpio.c 9 Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>, 10 */ 11 12 #include <linux/fs.h> 13 #include <linux/module.h> 14 #include <linux/errno.h> 15 #include <linux/kernel.h> 16 #include <linux/init.h> 17 #include <linux/cdev.h> 18 #include <linux/io.h> 19 #include <linux/ioport.h> 20 #include <linux/mutex.h> 21 #include <linux/nsc_gpio.h> 22 #include <linux/platform_device.h> 23 #include <linux/uaccess.h> 24 25 #define DEVNAME "pc8736x_gpio" 26 27 MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>"); 28 MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver"); 29 MODULE_LICENSE("GPL"); 30 31 static int major; /* default to dynamic major */ 32 module_param(major, int, 0); 33 MODULE_PARM_DESC(major, "Major device number"); 34 35 static DEFINE_MUTEX(pc8736x_gpio_config_lock); 36 static unsigned pc8736x_gpio_base; 37 static u8 pc8736x_gpio_shadow[4]; 38 39 #define SIO_BASE1 0x2E /* 1st command-reg to check */ 40 #define SIO_BASE2 0x4E /* alt command-reg to check */ 41 42 #define SIO_SID 0x20 /* SuperI/O ID Register */ 43 #define SIO_SID_PC87365 0xe5 /* Expected value in ID Register for PC87365 */ 44 #define SIO_SID_PC87366 0xe9 /* Expected value in ID Register for PC87366 */ 45 46 #define SIO_CF1 0x21 /* chip config, bit0 is chip enable */ 47 48 #define PC8736X_GPIO_RANGE 16 /* ioaddr range */ 49 #define PC8736X_GPIO_CT 32 /* minors matching 4 8 bit ports */ 50 51 #define SIO_UNIT_SEL 0x7 /* unit select reg */ 52 #define SIO_UNIT_ACT 0x30 /* unit enable */ 53 #define SIO_GPIO_UNIT 0x7 /* unit number of GPIO */ 54 #define SIO_VLM_UNIT 0x0D 55 #define SIO_TMS_UNIT 0x0E 56 57 /* config-space addrs to read/write each unit's runtime addr */ 58 #define SIO_BASE_HADDR 0x60 59 #define SIO_BASE_LADDR 0x61 60 61 /* GPIO config-space pin-control addresses */ 62 #define SIO_GPIO_PIN_SELECT 0xF0 63 #define SIO_GPIO_PIN_CONFIG 0xF1 64 #define SIO_GPIO_PIN_EVENT 0xF2 65 66 static unsigned char superio_cmd = 0; 67 static unsigned char selected_device = 0xFF; /* bogus start val */ 68 69 /* GPIO port runtime access, functionality */ 70 static int port_offset[] = { 0, 4, 8, 10 }; /* non-uniform offsets ! */ 71 /* static int event_capable[] = { 1, 1, 0, 0 }; ports 2,3 are hobbled */ 72 73 #define PORT_OUT 0 74 #define PORT_IN 1 75 #define PORT_EVT_EN 2 76 #define PORT_EVT_STST 3 77 78 static struct platform_device *pdev; /* use in dev_*() */ 79 80 static inline void superio_outb(int addr, int val) 81 { 82 outb_p(addr, superio_cmd); 83 outb_p(val, superio_cmd + 1); 84 } 85 86 static inline int superio_inb(int addr) 87 { 88 outb_p(addr, superio_cmd); 89 return inb_p(superio_cmd + 1); 90 } 91 92 static int pc8736x_superio_present(void) 93 { 94 int id; 95 96 /* try the 2 possible values, read a hardware reg to verify */ 97 superio_cmd = SIO_BASE1; 98 id = superio_inb(SIO_SID); 99 if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366) 100 return superio_cmd; 101 102 superio_cmd = SIO_BASE2; 103 id = superio_inb(SIO_SID); 104 if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366) 105 return superio_cmd; 106 107 return 0; 108 } 109 110 static void device_select(unsigned devldn) 111 { 112 superio_outb(SIO_UNIT_SEL, devldn); 113 selected_device = devldn; 114 } 115 116 static void select_pin(unsigned iminor) 117 { 118 /* select GPIO port/pin from device minor number */ 119 device_select(SIO_GPIO_UNIT); 120 superio_outb(SIO_GPIO_PIN_SELECT, 121 ((iminor << 1) & 0xF0) | (iminor & 0x7)); 122 } 123 124 static inline u32 pc8736x_gpio_configure_fn(unsigned index, u32 mask, u32 bits, 125 u32 func_slct) 126 { 127 u32 config, new_config; 128 129 mutex_lock(&pc8736x_gpio_config_lock); 130 131 device_select(SIO_GPIO_UNIT); 132 select_pin(index); 133 134 /* read current config value */ 135 config = superio_inb(func_slct); 136 137 /* set new config */ 138 new_config = (config & mask) | bits; 139 superio_outb(func_slct, new_config); 140 141 mutex_unlock(&pc8736x_gpio_config_lock); 142 143 return config; 144 } 145 146 static u32 pc8736x_gpio_configure(unsigned index, u32 mask, u32 bits) 147 { 148 return pc8736x_gpio_configure_fn(index, mask, bits, 149 SIO_GPIO_PIN_CONFIG); 150 } 151 152 static int pc8736x_gpio_get(unsigned minor) 153 { 154 int port, bit, val; 155 156 port = minor >> 3; 157 bit = minor & 7; 158 val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN); 159 val >>= bit; 160 val &= 1; 161 162 dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d\n", 163 minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit, 164 val); 165 166 return val; 167 } 168 169 static void pc8736x_gpio_set(unsigned minor, int val) 170 { 171 int port, bit, curval; 172 173 minor &= 0x1f; 174 port = minor >> 3; 175 bit = minor & 7; 176 curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT); 177 178 dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n", 179 pc8736x_gpio_base + port_offset[port] + PORT_OUT, 180 curval, bit, (curval & ~(1 << bit)), val, (val << bit)); 181 182 val = (curval & ~(1 << bit)) | (val << bit); 183 184 dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)" 185 " %2x -> %2x\n", minor, port, bit, curval, val); 186 187 outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT); 188 189 curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT); 190 val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN); 191 192 dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val); 193 pc8736x_gpio_shadow[port] = val; 194 } 195 196 static int pc8736x_gpio_current(unsigned minor) 197 { 198 int port, bit; 199 minor &= 0x1f; 200 port = minor >> 3; 201 bit = minor & 7; 202 return ((pc8736x_gpio_shadow[port] >> bit) & 0x01); 203 } 204 205 static void pc8736x_gpio_change(unsigned index) 206 { 207 pc8736x_gpio_set(index, !pc8736x_gpio_current(index)); 208 } 209 210 static struct nsc_gpio_ops pc8736x_gpio_ops = { 211 .owner = THIS_MODULE, 212 .gpio_config = pc8736x_gpio_configure, 213 .gpio_dump = nsc_gpio_dump, 214 .gpio_get = pc8736x_gpio_get, 215 .gpio_set = pc8736x_gpio_set, 216 .gpio_change = pc8736x_gpio_change, 217 .gpio_current = pc8736x_gpio_current 218 }; 219 220 static int pc8736x_gpio_open(struct inode *inode, struct file *file) 221 { 222 unsigned m = iminor(inode); 223 file->private_data = &pc8736x_gpio_ops; 224 225 dev_dbg(&pdev->dev, "open %d\n", m); 226 227 if (m >= PC8736X_GPIO_CT) 228 return -EINVAL; 229 return nonseekable_open(inode, file); 230 } 231 232 static const struct file_operations pc8736x_gpio_fileops = { 233 .owner = THIS_MODULE, 234 .open = pc8736x_gpio_open, 235 .write = nsc_gpio_write, 236 .read = nsc_gpio_read, 237 .llseek = no_llseek, 238 }; 239 240 static void __init pc8736x_init_shadow(void) 241 { 242 int port; 243 244 /* read the current values driven on the GPIO signals */ 245 for (port = 0; port < 4; ++port) 246 pc8736x_gpio_shadow[port] 247 = inb_p(pc8736x_gpio_base + port_offset[port] 248 + PORT_OUT); 249 250 } 251 252 static struct cdev pc8736x_gpio_cdev; 253 254 static int __init pc8736x_gpio_init(void) 255 { 256 int rc; 257 dev_t devid; 258 259 pdev = platform_device_alloc(DEVNAME, 0); 260 if (!pdev) 261 return -ENOMEM; 262 263 rc = platform_device_add(pdev); 264 if (rc) { 265 rc = -ENODEV; 266 goto undo_platform_dev_alloc; 267 } 268 dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing\n"); 269 270 if (!pc8736x_superio_present()) { 271 rc = -ENODEV; 272 dev_err(&pdev->dev, "no device found\n"); 273 goto undo_platform_dev_add; 274 } 275 pc8736x_gpio_ops.dev = &pdev->dev; 276 277 /* Verify that chip and it's GPIO unit are both enabled. 278 My BIOS does this, so I take minimum action here 279 */ 280 rc = superio_inb(SIO_CF1); 281 if (!(rc & 0x01)) { 282 rc = -ENODEV; 283 dev_err(&pdev->dev, "device not enabled\n"); 284 goto undo_platform_dev_add; 285 } 286 device_select(SIO_GPIO_UNIT); 287 if (!superio_inb(SIO_UNIT_ACT)) { 288 rc = -ENODEV; 289 dev_err(&pdev->dev, "GPIO unit not enabled\n"); 290 goto undo_platform_dev_add; 291 } 292 293 /* read the GPIO unit base addr that chip responds to */ 294 pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8 295 | superio_inb(SIO_BASE_LADDR)); 296 297 if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) { 298 rc = -ENODEV; 299 dev_err(&pdev->dev, "GPIO ioport %x busy\n", 300 pc8736x_gpio_base); 301 goto undo_platform_dev_add; 302 } 303 dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base); 304 305 if (major) { 306 devid = MKDEV(major, 0); 307 rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME); 308 } else { 309 rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME); 310 major = MAJOR(devid); 311 } 312 313 if (rc < 0) { 314 dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc); 315 goto undo_request_region; 316 } 317 if (!major) { 318 major = rc; 319 dev_dbg(&pdev->dev, "got dynamic major %d\n", major); 320 } 321 322 pc8736x_init_shadow(); 323 324 /* ignore minor errs, and succeed */ 325 cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops); 326 cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT); 327 328 return 0; 329 330 undo_request_region: 331 release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE); 332 undo_platform_dev_add: 333 platform_device_del(pdev); 334 undo_platform_dev_alloc: 335 platform_device_put(pdev); 336 337 return rc; 338 } 339 340 static void __exit pc8736x_gpio_cleanup(void) 341 { 342 dev_dbg(&pdev->dev, "cleanup\n"); 343 344 cdev_del(&pc8736x_gpio_cdev); 345 unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT); 346 release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE); 347 348 platform_device_unregister(pdev); 349 } 350 351 module_init(pc8736x_gpio_init); 352 module_exit(pc8736x_gpio_cleanup); 353