xref: /openbmc/linux/drivers/char/mwave/mwavedd.c (revision db41bc9c)
1 /*
2 *
3 * mwavedd.c -- mwave device driver
4 *
5 *
6 * Written By: Mike Sullivan IBM Corporation
7 *
8 * Copyright (C) 1999 IBM Corporation
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18 * GNU General Public License for more details.
19 *
20 * NO WARRANTY
21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25 * solely responsible for determining the appropriateness of using and
26 * distributing the Program and assumes all risks associated with its
27 * exercise of rights under this Agreement, including but not limited to
28 * the risks and costs of program errors, damage to or loss of data,
29 * programs or equipment, and unavailability or interruption of operations.
30 *
31 * DISCLAIMER OF LIABILITY
32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39 *
40 * You should have received a copy of the GNU General Public License
41 * along with this program; if not, write to the Free Software
42 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
43 *
44 *
45 * 10/23/2000 - Alpha Release
46 *	First release to the public
47 */
48 
49 #include <linux/module.h>
50 #include <linux/kernel.h>
51 #include <linux/fs.h>
52 #include <linux/init.h>
53 #include <linux/major.h>
54 #include <linux/miscdevice.h>
55 #include <linux/device.h>
56 #include <linux/serial.h>
57 #include <linux/sched.h>
58 #include <linux/spinlock.h>
59 #include <linux/smp_lock.h>
60 #include <linux/delay.h>
61 #include <linux/serial_8250.h>
62 #include "smapi.h"
63 #include "mwavedd.h"
64 #include "3780i.h"
65 #include "tp3780i.h"
66 
67 MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver");
68 MODULE_AUTHOR("Mike Sullivan and Paul Schroeder");
69 MODULE_LICENSE("GPL");
70 
71 /*
72 * These parameters support the setting of MWave resources. Note that no
73 * checks are made against other devices (ie. superio) for conflicts.
74 * We'll depend on users using the tpctl utility to do that for now
75 */
76 int mwave_debug = 0;
77 int mwave_3780i_irq = 0;
78 int mwave_3780i_io = 0;
79 int mwave_uart_irq = 0;
80 int mwave_uart_io = 0;
81 module_param(mwave_debug, int, 0);
82 module_param(mwave_3780i_irq, int, 0);
83 module_param(mwave_3780i_io, int, 0);
84 module_param(mwave_uart_irq, int, 0);
85 module_param(mwave_uart_io, int, 0);
86 
87 static int mwave_open(struct inode *inode, struct file *file);
88 static int mwave_close(struct inode *inode, struct file *file);
89 static int mwave_ioctl(struct inode *inode, struct file *filp,
90                        unsigned int iocmd, unsigned long ioarg);
91 
92 MWAVE_DEVICE_DATA mwave_s_mdd;
93 
94 static int mwave_open(struct inode *inode, struct file *file)
95 {
96 	unsigned int retval = 0;
97 
98 	PRINTK_3(TRACE_MWAVE,
99 		"mwavedd::mwave_open, entry inode %p file %p\n",
100 		 inode, file);
101 	PRINTK_2(TRACE_MWAVE,
102 		"mwavedd::mwave_open, exit return retval %x\n", retval);
103 
104 	cycle_kernel_lock();
105 	return retval;
106 }
107 
108 static int mwave_close(struct inode *inode, struct file *file)
109 {
110 	unsigned int retval = 0;
111 
112 	PRINTK_3(TRACE_MWAVE,
113 		"mwavedd::mwave_close, entry inode %p file %p\n",
114 		 inode,  file);
115 
116 	PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_close, exit retval %x\n",
117 		retval);
118 
119 	return retval;
120 }
121 
122 static int mwave_ioctl(struct inode *inode, struct file *file,
123                        unsigned int iocmd, unsigned long ioarg)
124 {
125 	unsigned int retval = 0;
126 	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
127 	void __user *arg = (void __user *)ioarg;
128 
129 	PRINTK_5(TRACE_MWAVE,
130 		"mwavedd::mwave_ioctl, entry inode %p file %p cmd %x arg %x\n",
131 		 inode,  file, iocmd, (int) ioarg);
132 
133 	switch (iocmd) {
134 
135 		case IOCTL_MW_RESET:
136 			PRINTK_1(TRACE_MWAVE,
137 				"mwavedd::mwave_ioctl, IOCTL_MW_RESET"
138 				" calling tp3780I_ResetDSP\n");
139 			retval = tp3780I_ResetDSP(&pDrvData->rBDData);
140 			PRINTK_2(TRACE_MWAVE,
141 				"mwavedd::mwave_ioctl, IOCTL_MW_RESET"
142 				" retval %x from tp3780I_ResetDSP\n",
143 				retval);
144 			break;
145 
146 		case IOCTL_MW_RUN:
147 			PRINTK_1(TRACE_MWAVE,
148 				"mwavedd::mwave_ioctl, IOCTL_MW_RUN"
149 				" calling tp3780I_StartDSP\n");
150 			retval = tp3780I_StartDSP(&pDrvData->rBDData);
151 			PRINTK_2(TRACE_MWAVE,
152 				"mwavedd::mwave_ioctl, IOCTL_MW_RUN"
153 				" retval %x from tp3780I_StartDSP\n",
154 				retval);
155 			break;
156 
157 		case IOCTL_MW_DSP_ABILITIES: {
158 			MW_ABILITIES rAbilities;
159 
160 			PRINTK_1(TRACE_MWAVE,
161 				"mwavedd::mwave_ioctl,"
162 				" IOCTL_MW_DSP_ABILITIES calling"
163 				" tp3780I_QueryAbilities\n");
164 			retval = tp3780I_QueryAbilities(&pDrvData->rBDData,
165 					&rAbilities);
166 			PRINTK_2(TRACE_MWAVE,
167 				"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
168 				" retval %x from tp3780I_QueryAbilities\n",
169 				retval);
170 			if (retval == 0) {
171 				if( copy_to_user(arg, &rAbilities,
172 							sizeof(MW_ABILITIES)) )
173 					return -EFAULT;
174 			}
175 			PRINTK_2(TRACE_MWAVE,
176 				"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
177 				" exit retval %x\n",
178 				retval);
179 		}
180 			break;
181 
182 		case IOCTL_MW_READ_DATA:
183 		case IOCTL_MW_READCLEAR_DATA: {
184 			MW_READWRITE rReadData;
185 			unsigned short __user *pusBuffer = NULL;
186 
187 			if( copy_from_user(&rReadData, arg,
188 						sizeof(MW_READWRITE)) )
189 				return -EFAULT;
190 			pusBuffer = (unsigned short __user *) (rReadData.pBuf);
191 
192 			PRINTK_4(TRACE_MWAVE,
193 				"mwavedd::mwave_ioctl IOCTL_MW_READ_DATA,"
194 				" size %lx, ioarg %lx pusBuffer %p\n",
195 				rReadData.ulDataLength, ioarg, pusBuffer);
196 			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
197 					iocmd,
198 					pusBuffer,
199 					rReadData.ulDataLength,
200 					rReadData.usDspAddress);
201 		}
202 			break;
203 
204 		case IOCTL_MW_READ_INST: {
205 			MW_READWRITE rReadData;
206 			unsigned short __user *pusBuffer = NULL;
207 
208 			if( copy_from_user(&rReadData, arg,
209 						sizeof(MW_READWRITE)) )
210 				return -EFAULT;
211 			pusBuffer = (unsigned short __user *) (rReadData.pBuf);
212 
213 			PRINTK_4(TRACE_MWAVE,
214 				"mwavedd::mwave_ioctl IOCTL_MW_READ_INST,"
215 				" size %lx, ioarg %lx pusBuffer %p\n",
216 				rReadData.ulDataLength / 2, ioarg,
217 				pusBuffer);
218 			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
219 				iocmd, pusBuffer,
220 				rReadData.ulDataLength / 2,
221 				rReadData.usDspAddress);
222 		}
223 			break;
224 
225 		case IOCTL_MW_WRITE_DATA: {
226 			MW_READWRITE rWriteData;
227 			unsigned short __user *pusBuffer = NULL;
228 
229 			if( copy_from_user(&rWriteData, arg,
230 						sizeof(MW_READWRITE)) )
231 				return -EFAULT;
232 			pusBuffer = (unsigned short __user *) (rWriteData.pBuf);
233 
234 			PRINTK_4(TRACE_MWAVE,
235 				"mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA,"
236 				" size %lx, ioarg %lx pusBuffer %p\n",
237 				rWriteData.ulDataLength, ioarg,
238 				pusBuffer);
239 			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
240 					iocmd, pusBuffer,
241 					rWriteData.ulDataLength,
242 					rWriteData.usDspAddress);
243 		}
244 			break;
245 
246 		case IOCTL_MW_WRITE_INST: {
247 			MW_READWRITE rWriteData;
248 			unsigned short __user *pusBuffer = NULL;
249 
250 			if( copy_from_user(&rWriteData, arg,
251 						sizeof(MW_READWRITE)) )
252 				return -EFAULT;
253 			pusBuffer = (unsigned short __user *)(rWriteData.pBuf);
254 
255 			PRINTK_4(TRACE_MWAVE,
256 				"mwavedd::mwave_ioctl IOCTL_MW_WRITE_INST,"
257 				" size %lx, ioarg %lx pusBuffer %p\n",
258 				rWriteData.ulDataLength, ioarg,
259 				pusBuffer);
260 			retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData,
261 					iocmd, pusBuffer,
262 					rWriteData.ulDataLength,
263 					rWriteData.usDspAddress);
264 		}
265 			break;
266 
267 		case IOCTL_MW_REGISTER_IPC: {
268 			unsigned int ipcnum = (unsigned int) ioarg;
269 
270 			PRINTK_3(TRACE_MWAVE,
271 				"mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
272 				" ipcnum %x entry usIntCount %x\n",
273 				ipcnum,
274 				pDrvData->IPCs[ipcnum].usIntCount);
275 
276 			if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
277 				PRINTK_ERROR(KERN_ERR_MWAVE
278 						"mwavedd::mwave_ioctl:"
279 						" IOCTL_MW_REGISTER_IPC:"
280 						" Error: Invalid ipcnum %x\n",
281 						ipcnum);
282 				return -EINVAL;
283 			}
284 			pDrvData->IPCs[ipcnum].bIsHere = FALSE;
285 			pDrvData->IPCs[ipcnum].bIsEnabled = TRUE;
286 
287 			PRINTK_2(TRACE_MWAVE,
288 				"mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
289 				" ipcnum %x exit\n",
290 				ipcnum);
291 		}
292 			break;
293 
294 		case IOCTL_MW_GET_IPC: {
295 			unsigned int ipcnum = (unsigned int) ioarg;
296 
297 			PRINTK_3(TRACE_MWAVE,
298 				"mwavedd::mwave_ioctl IOCTL_MW_GET_IPC"
299 				" ipcnum %x, usIntCount %x\n",
300 				ipcnum,
301 				pDrvData->IPCs[ipcnum].usIntCount);
302 			if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
303 				PRINTK_ERROR(KERN_ERR_MWAVE
304 						"mwavedd::mwave_ioctl:"
305 						" IOCTL_MW_GET_IPC: Error:"
306 						" Invalid ipcnum %x\n", ipcnum);
307 				return -EINVAL;
308 			}
309 
310 			if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
311 				DECLARE_WAITQUEUE(wait, current);
312 
313 				PRINTK_2(TRACE_MWAVE,
314 					"mwavedd::mwave_ioctl, thread for"
315 					" ipc %x going to sleep\n",
316 					ipcnum);
317 				add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
318 				pDrvData->IPCs[ipcnum].bIsHere = TRUE;
319 				set_current_state(TASK_INTERRUPTIBLE);
320 				/* check whether an event was signalled by */
321 				/* the interrupt handler while we were gone */
322 				if (pDrvData->IPCs[ipcnum].usIntCount == 1) {	/* first int has occurred (race condition) */
323 					pDrvData->IPCs[ipcnum].usIntCount = 2;	/* first int has been handled */
324 					PRINTK_2(TRACE_MWAVE,
325 						"mwavedd::mwave_ioctl"
326 						" IOCTL_MW_GET_IPC ipcnum %x"
327 						" handling first int\n",
328 						ipcnum);
329 				} else {	/* either 1st int has not yet occurred, or we have already handled the first int */
330 					schedule();
331 					if (pDrvData->IPCs[ipcnum].usIntCount == 1) {
332 						pDrvData->IPCs[ipcnum].usIntCount = 2;
333 					}
334 					PRINTK_2(TRACE_MWAVE,
335 						"mwavedd::mwave_ioctl"
336 						" IOCTL_MW_GET_IPC ipcnum %x"
337 						" woke up and returning to"
338 						" application\n",
339 						ipcnum);
340 				}
341 				pDrvData->IPCs[ipcnum].bIsHere = FALSE;
342 				remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
343 				set_current_state(TASK_RUNNING);
344 				PRINTK_2(TRACE_MWAVE,
345 					"mwavedd::mwave_ioctl IOCTL_MW_GET_IPC,"
346 					" returning thread for ipc %x"
347 					" processing\n",
348 					ipcnum);
349 			}
350 		}
351 			break;
352 
353 		case IOCTL_MW_UNREGISTER_IPC: {
354 			unsigned int ipcnum = (unsigned int) ioarg;
355 
356 			PRINTK_2(TRACE_MWAVE,
357 				"mwavedd::mwave_ioctl IOCTL_MW_UNREGISTER_IPC"
358 				" ipcnum %x\n",
359 				ipcnum);
360 			if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
361 				PRINTK_ERROR(KERN_ERR_MWAVE
362 						"mwavedd::mwave_ioctl:"
363 						" IOCTL_MW_UNREGISTER_IPC:"
364 						" Error: Invalid ipcnum %x\n",
365 						ipcnum);
366 				return -EINVAL;
367 			}
368 			if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
369 				pDrvData->IPCs[ipcnum].bIsEnabled = FALSE;
370 				if (pDrvData->IPCs[ipcnum].bIsHere == TRUE) {
371 					wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue);
372 				}
373 			}
374 		}
375 			break;
376 
377 		default:
378 			PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_ioctl:"
379 					" Error: Unrecognized iocmd %x\n",
380 					iocmd);
381 			return -ENOTTY;
382 			break;
383 	} /* switch */
384 
385 	PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, exit retval %x\n", retval);
386 
387 	return retval;
388 }
389 
390 
391 static ssize_t mwave_read(struct file *file, char __user *buf, size_t count,
392                           loff_t * ppos)
393 {
394 	PRINTK_5(TRACE_MWAVE,
395 		"mwavedd::mwave_read entry file %p, buf %p, count %zx ppos %p\n",
396 		file, buf, count, ppos);
397 
398 	return -EINVAL;
399 }
400 
401 
402 static ssize_t mwave_write(struct file *file, const char __user *buf,
403                            size_t count, loff_t * ppos)
404 {
405 	PRINTK_5(TRACE_MWAVE,
406 		"mwavedd::mwave_write entry file %p, buf %p,"
407 		" count %zx ppos %p\n",
408 		file, buf, count, ppos);
409 
410 	return -EINVAL;
411 }
412 
413 
414 static int register_serial_portandirq(unsigned int port, int irq)
415 {
416 	struct uart_port uart;
417 
418 	switch ( port ) {
419 		case 0x3f8:
420 		case 0x2f8:
421 		case 0x3e8:
422 		case 0x2e8:
423 			/* OK */
424 			break;
425 		default:
426 			PRINTK_ERROR(KERN_ERR_MWAVE
427 					"mwavedd::register_serial_portandirq:"
428 					" Error: Illegal port %x\n", port );
429 			return -1;
430 	} /* switch */
431 	/* port is okay */
432 
433 	switch ( irq ) {
434 		case 3:
435 		case 4:
436 		case 5:
437 		case 7:
438 			/* OK */
439 			break;
440 		default:
441 			PRINTK_ERROR(KERN_ERR_MWAVE
442 					"mwavedd::register_serial_portandirq:"
443 					" Error: Illegal irq %x\n", irq );
444 			return -1;
445 	} /* switch */
446 	/* irq is okay */
447 
448 	memset(&uart, 0, sizeof(struct uart_port));
449 
450 	uart.uartclk =  1843200;
451 	uart.iobase = port;
452 	uart.irq = irq;
453 	uart.iotype = UPIO_PORT;
454 	uart.flags =  UPF_SHARE_IRQ;
455 	return serial8250_register_port(&uart);
456 }
457 
458 
459 static const struct file_operations mwave_fops = {
460 	.owner		= THIS_MODULE,
461 	.read		= mwave_read,
462 	.write		= mwave_write,
463 	.ioctl		= mwave_ioctl,
464 	.open		= mwave_open,
465 	.release	= mwave_close
466 };
467 
468 
469 static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops };
470 
471 #if 0 /* totally b0rked */
472 /*
473  * sysfs support <paulsch@us.ibm.com>
474  */
475 
476 struct device mwave_device;
477 
478 /* Prevent code redundancy, create a macro for mwave_show_* functions. */
479 #define mwave_show_function(attr_name, format_string, field)		\
480 static ssize_t mwave_show_##attr_name(struct device *dev, struct device_attribute *attr, char *buf)	\
481 {									\
482 	DSP_3780I_CONFIG_SETTINGS *pSettings =				\
483 		&mwave_s_mdd.rBDData.rDspSettings;			\
484         return sprintf(buf, format_string, pSettings->field);		\
485 }
486 
487 /* All of our attributes are read attributes. */
488 #define mwave_dev_rd_attr(attr_name, format_string, field)		\
489 	mwave_show_function(attr_name, format_string, field)		\
490 static DEVICE_ATTR(attr_name, S_IRUGO, mwave_show_##attr_name, NULL)
491 
492 mwave_dev_rd_attr (3780i_dma, "%i\n", usDspDma);
493 mwave_dev_rd_attr (3780i_irq, "%i\n", usDspIrq);
494 mwave_dev_rd_attr (3780i_io, "%#.4x\n", usDspBaseIO);
495 mwave_dev_rd_attr (uart_irq, "%i\n", usUartIrq);
496 mwave_dev_rd_attr (uart_io, "%#.4x\n", usUartBaseIO);
497 
498 static struct device_attribute * const mwave_dev_attrs[] = {
499 	&dev_attr_3780i_dma,
500 	&dev_attr_3780i_irq,
501 	&dev_attr_3780i_io,
502 	&dev_attr_uart_irq,
503 	&dev_attr_uart_io,
504 };
505 #endif
506 
507 /*
508 * mwave_init is called on module load
509 *
510 * mwave_exit is called on module unload
511 * mwave_exit is also used to clean up after an aborted mwave_init
512 */
513 static void mwave_exit(void)
514 {
515 	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
516 
517 	PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit entry\n");
518 
519 #if 0
520 	for (i = 0; i < pDrvData->nr_registered_attrs; i++)
521 		device_remove_file(&mwave_device, mwave_dev_attrs[i]);
522 	pDrvData->nr_registered_attrs = 0;
523 
524 	if (pDrvData->device_registered) {
525 		device_unregister(&mwave_device);
526 		pDrvData->device_registered = FALSE;
527 	}
528 #endif
529 
530 	if ( pDrvData->sLine >= 0 ) {
531 		serial8250_unregister_port(pDrvData->sLine);
532 	}
533 	if (pDrvData->bMwaveDevRegistered) {
534 		misc_deregister(&mwave_misc_dev);
535 	}
536 	if (pDrvData->bDSPEnabled) {
537 		tp3780I_DisableDSP(&pDrvData->rBDData);
538 	}
539 	if (pDrvData->bResourcesClaimed) {
540 		tp3780I_ReleaseResources(&pDrvData->rBDData);
541 	}
542 	if (pDrvData->bBDInitialized) {
543 		tp3780I_Cleanup(&pDrvData->rBDData);
544 	}
545 
546 	PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit exit\n");
547 }
548 
549 module_exit(mwave_exit);
550 
551 static int __init mwave_init(void)
552 {
553 	int i;
554 	int retval = 0;
555 	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
556 
557 	PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n");
558 
559 	memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA));
560 
561 	pDrvData->bBDInitialized = FALSE;
562 	pDrvData->bResourcesClaimed = FALSE;
563 	pDrvData->bDSPEnabled = FALSE;
564 	pDrvData->bDSPReset = FALSE;
565 	pDrvData->bMwaveDevRegistered = FALSE;
566 	pDrvData->sLine = -1;
567 
568 	for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) {
569 		pDrvData->IPCs[i].bIsEnabled = FALSE;
570 		pDrvData->IPCs[i].bIsHere = FALSE;
571 		pDrvData->IPCs[i].usIntCount = 0;	/* no ints received yet */
572 		init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue);
573 	}
574 
575 	retval = tp3780I_InitializeBoardData(&pDrvData->rBDData);
576 	PRINTK_2(TRACE_MWAVE,
577 		"mwavedd::mwave_init, return from tp3780I_InitializeBoardData"
578 		" retval %x\n",
579 		retval);
580 	if (retval) {
581 		PRINTK_ERROR(KERN_ERR_MWAVE
582 				"mwavedd::mwave_init: Error:"
583 				" Failed to initialize board data\n");
584 		goto cleanup_error;
585 	}
586 	pDrvData->bBDInitialized = TRUE;
587 
588 	retval = tp3780I_CalcResources(&pDrvData->rBDData);
589 	PRINTK_2(TRACE_MWAVE,
590 		"mwavedd::mwave_init, return from tp3780I_CalcResources"
591 		" retval %x\n",
592 		retval);
593 	if (retval) {
594 		PRINTK_ERROR(KERN_ERR_MWAVE
595 				"mwavedd:mwave_init: Error:"
596 				" Failed to calculate resources\n");
597 		goto cleanup_error;
598 	}
599 
600 	retval = tp3780I_ClaimResources(&pDrvData->rBDData);
601 	PRINTK_2(TRACE_MWAVE,
602 		"mwavedd::mwave_init, return from tp3780I_ClaimResources"
603 		" retval %x\n",
604 		retval);
605 	if (retval) {
606 		PRINTK_ERROR(KERN_ERR_MWAVE
607 				"mwavedd:mwave_init: Error:"
608 				" Failed to claim resources\n");
609 		goto cleanup_error;
610 	}
611 	pDrvData->bResourcesClaimed = TRUE;
612 
613 	retval = tp3780I_EnableDSP(&pDrvData->rBDData);
614 	PRINTK_2(TRACE_MWAVE,
615 		"mwavedd::mwave_init, return from tp3780I_EnableDSP"
616 		" retval %x\n",
617 		retval);
618 	if (retval) {
619 		PRINTK_ERROR(KERN_ERR_MWAVE
620 				"mwavedd:mwave_init: Error:"
621 				" Failed to enable DSP\n");
622 		goto cleanup_error;
623 	}
624 	pDrvData->bDSPEnabled = TRUE;
625 
626 	if (misc_register(&mwave_misc_dev) < 0) {
627 		PRINTK_ERROR(KERN_ERR_MWAVE
628 				"mwavedd:mwave_init: Error:"
629 				" Failed to register misc device\n");
630 		goto cleanup_error;
631 	}
632 	pDrvData->bMwaveDevRegistered = TRUE;
633 
634 	pDrvData->sLine = register_serial_portandirq(
635 		pDrvData->rBDData.rDspSettings.usUartBaseIO,
636 		pDrvData->rBDData.rDspSettings.usUartIrq
637 	);
638 	if (pDrvData->sLine < 0) {
639 		PRINTK_ERROR(KERN_ERR_MWAVE
640 				"mwavedd:mwave_init: Error:"
641 				" Failed to register serial driver\n");
642 		goto cleanup_error;
643 	}
644 	/* uart is registered */
645 
646 #if 0
647 	/* sysfs */
648 	memset(&mwave_device, 0, sizeof (struct device));
649 	snprintf(mwave_device.bus_id, BUS_ID_SIZE, "mwave");
650 
651 	if (device_register(&mwave_device))
652 		goto cleanup_error;
653 	pDrvData->device_registered = TRUE;
654 	for (i = 0; i < ARRAY_SIZE(mwave_dev_attrs); i++) {
655 		if(device_create_file(&mwave_device, mwave_dev_attrs[i])) {
656 			PRINTK_ERROR(KERN_ERR_MWAVE
657 					"mwavedd:mwave_init: Error:"
658 					" Failed to create sysfs file %s\n",
659 					mwave_dev_attrs[i]->attr.name);
660 			goto cleanup_error;
661 		}
662 		pDrvData->nr_registered_attrs++;
663 	}
664 #endif
665 
666 	/* SUCCESS! */
667 	return 0;
668 
669 cleanup_error:
670 	PRINTK_ERROR(KERN_ERR_MWAVE
671 			"mwavedd::mwave_init: Error:"
672 			" Failed to initialize\n");
673 	mwave_exit(); /* clean up */
674 
675 	return -EIO;
676 }
677 
678 module_init(mwave_init);
679 
680