xref: /openbmc/linux/drivers/char/mwave/3780i.c (revision aac5987a)
1 /*
2 *
3 * 3780i.c -- helper routines for the 3780i DSP
4 *
5 *
6 * Written By: Mike Sullivan IBM Corporation
7 *
8 * Copyright (C) 1999 IBM Corporation
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18 * GNU General Public License for more details.
19 *
20 * NO WARRANTY
21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25 * solely responsible for determining the appropriateness of using and
26 * distributing the Program and assumes all risks associated with its
27 * exercise of rights under this Agreement, including but not limited to
28 * the risks and costs of program errors, damage to or loss of data,
29 * programs or equipment, and unavailability or interruption of operations.
30 *
31 * DISCLAIMER OF LIABILITY
32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39 *
40 * You should have received a copy of the GNU General Public License
41 * along with this program; if not, write to the Free Software
42 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
43 *
44 *
45 * 10/23/2000 - Alpha Release
46 *	First release to the public
47 */
48 
49 #include <linux/kernel.h>
50 #include <linux/unistd.h>
51 #include <linux/delay.h>
52 #include <linux/ioport.h>
53 #include <linux/bitops.h>
54 #include <linux/sched.h>	/* cond_resched() */
55 
56 #include <asm/io.h>
57 #include <linux/uaccess.h>
58 #include <asm/irq.h>
59 #include "smapi.h"
60 #include "mwavedd.h"
61 #include "3780i.h"
62 
63 static DEFINE_SPINLOCK(dsp_lock);
64 
65 static void PaceMsaAccess(unsigned short usDspBaseIO)
66 {
67 	cond_resched();
68 	udelay(100);
69 	cond_resched();
70 }
71 
72 unsigned short dsp3780I_ReadMsaCfg(unsigned short usDspBaseIO,
73                                    unsigned long ulMsaAddr)
74 {
75 	unsigned long flags;
76 	unsigned short val;
77 
78 	PRINTK_3(TRACE_3780I,
79 		"3780i::dsp3780I_ReadMsaCfg entry usDspBaseIO %x ulMsaAddr %lx\n",
80 		usDspBaseIO, ulMsaAddr);
81 
82 	spin_lock_irqsave(&dsp_lock, flags);
83 	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr);
84 	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16));
85 	val = InWordDsp(DSP_MsaDataDSISHigh);
86 	spin_unlock_irqrestore(&dsp_lock, flags);
87 
88 	PRINTK_2(TRACE_3780I, "3780i::dsp3780I_ReadMsaCfg exit val %x\n", val);
89 
90 	return val;
91 }
92 
93 void dsp3780I_WriteMsaCfg(unsigned short usDspBaseIO,
94                           unsigned long ulMsaAddr, unsigned short usValue)
95 {
96 	unsigned long flags;
97 
98 	PRINTK_4(TRACE_3780I,
99 		"3780i::dsp3780i_WriteMsaCfg entry usDspBaseIO %x ulMsaAddr %lx usValue %x\n",
100 		usDspBaseIO, ulMsaAddr, usValue);
101 
102 	spin_lock_irqsave(&dsp_lock, flags);
103 	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr);
104 	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16));
105 	OutWordDsp(DSP_MsaDataDSISHigh, usValue);
106 	spin_unlock_irqrestore(&dsp_lock, flags);
107 }
108 
109 static void dsp3780I_WriteGenCfg(unsigned short usDspBaseIO, unsigned uIndex,
110 				 unsigned char ucValue)
111 {
112 	DSP_ISA_SLAVE_CONTROL rSlaveControl;
113 	DSP_ISA_SLAVE_CONTROL rSlaveControl_Save;
114 
115 
116 	PRINTK_4(TRACE_3780I,
117 		"3780i::dsp3780i_WriteGenCfg entry usDspBaseIO %x uIndex %x ucValue %x\n",
118 		usDspBaseIO, uIndex, ucValue);
119 
120 	MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl);
121 
122 	PRINTK_2(TRACE_3780I,
123 		"3780i::dsp3780i_WriteGenCfg rSlaveControl %x\n",
124 		MKBYTE(rSlaveControl));
125 
126 	rSlaveControl_Save = rSlaveControl;
127 	rSlaveControl.ConfigMode = true;
128 
129 	PRINTK_2(TRACE_3780I,
130 		"3780i::dsp3780i_WriteGenCfg entry rSlaveControl+ConfigMode %x\n",
131 		MKBYTE(rSlaveControl));
132 
133 	OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl));
134 	OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex);
135 	OutByteDsp(DSP_ConfigData, ucValue);
136 	OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save));
137 
138 	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_WriteGenCfg exit\n");
139 
140 
141 }
142 
143 #if 0
144 unsigned char dsp3780I_ReadGenCfg(unsigned short usDspBaseIO,
145                                   unsigned uIndex)
146 {
147 	DSP_ISA_SLAVE_CONTROL rSlaveControl;
148 	DSP_ISA_SLAVE_CONTROL rSlaveControl_Save;
149 	unsigned char ucValue;
150 
151 
152 	PRINTK_3(TRACE_3780I,
153 		"3780i::dsp3780i_ReadGenCfg entry usDspBaseIO %x uIndex %x\n",
154 		usDspBaseIO, uIndex);
155 
156 	MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl);
157 	rSlaveControl_Save = rSlaveControl;
158 	rSlaveControl.ConfigMode = true;
159 	OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl));
160 	OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex);
161 	ucValue = InByteDsp(DSP_ConfigData);
162 	OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save));
163 
164 	PRINTK_2(TRACE_3780I,
165 		"3780i::dsp3780i_ReadGenCfg exit ucValue %x\n", ucValue);
166 
167 
168 	return ucValue;
169 }
170 #endif  /*  0  */
171 
172 int dsp3780I_EnableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings,
173                        unsigned short *pIrqMap,
174                        unsigned short *pDmaMap)
175 {
176 	unsigned long flags;
177 	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
178 	int i;
179 	DSP_UART_CFG_1 rUartCfg1;
180 	DSP_UART_CFG_2 rUartCfg2;
181 	DSP_HBRIDGE_CFG_1 rHBridgeCfg1;
182 	DSP_HBRIDGE_CFG_2 rHBridgeCfg2;
183 	DSP_BUSMASTER_CFG_1 rBusmasterCfg1;
184 	DSP_BUSMASTER_CFG_2 rBusmasterCfg2;
185 	DSP_ISA_PROT_CFG rIsaProtCfg;
186 	DSP_POWER_MGMT_CFG rPowerMgmtCfg;
187 	DSP_HBUS_TIMER_CFG rHBusTimerCfg;
188 	DSP_LBUS_TIMEOUT_DISABLE rLBusTimeoutDisable;
189 	DSP_CHIP_RESET rChipReset;
190 	DSP_CLOCK_CONTROL_1 rClockControl1;
191 	DSP_CLOCK_CONTROL_2 rClockControl2;
192 	DSP_ISA_SLAVE_CONTROL rSlaveControl;
193 	DSP_HBRIDGE_CONTROL rHBridgeControl;
194 	unsigned short ChipID = 0;
195 	unsigned short tval;
196 
197 
198 	PRINTK_2(TRACE_3780I,
199 		"3780i::dsp3780I_EnableDSP entry pSettings->bDSPEnabled %x\n",
200 		pSettings->bDSPEnabled);
201 
202 
203 	if (!pSettings->bDSPEnabled) {
204 		PRINTK_ERROR( KERN_ERR "3780i::dsp3780I_EnableDSP: Error: DSP not enabled. Aborting.\n" );
205 		return -EIO;
206 	}
207 
208 
209 	PRINTK_2(TRACE_3780I,
210 		"3780i::dsp3780i_EnableDSP entry pSettings->bModemEnabled %x\n",
211 		pSettings->bModemEnabled);
212 
213 	if (pSettings->bModemEnabled) {
214 		rUartCfg1.Reserved = rUartCfg2.Reserved = 0;
215 		rUartCfg1.IrqActiveLow = pSettings->bUartIrqActiveLow;
216 		rUartCfg1.IrqPulse = pSettings->bUartIrqPulse;
217 		rUartCfg1.Irq =
218 			(unsigned char) pIrqMap[pSettings->usUartIrq];
219 		switch (pSettings->usUartBaseIO) {
220 		case 0x03F8:
221 			rUartCfg1.BaseIO = 0;
222 			break;
223 		case 0x02F8:
224 			rUartCfg1.BaseIO = 1;
225 			break;
226 		case 0x03E8:
227 			rUartCfg1.BaseIO = 2;
228 			break;
229 		case 0x02E8:
230 			rUartCfg1.BaseIO = 3;
231 			break;
232 		}
233 		rUartCfg2.Enable = true;
234 	}
235 
236 	rHBridgeCfg1.Reserved = rHBridgeCfg2.Reserved = 0;
237 	rHBridgeCfg1.IrqActiveLow = pSettings->bDspIrqActiveLow;
238 	rHBridgeCfg1.IrqPulse = pSettings->bDspIrqPulse;
239 	rHBridgeCfg1.Irq = (unsigned char) pIrqMap[pSettings->usDspIrq];
240 	rHBridgeCfg1.AccessMode = 1;
241 	rHBridgeCfg2.Enable = true;
242 
243 
244 	rBusmasterCfg2.Reserved = 0;
245 	rBusmasterCfg1.Dma = (unsigned char) pDmaMap[pSettings->usDspDma];
246 	rBusmasterCfg1.NumTransfers =
247 		(unsigned char) pSettings->usNumTransfers;
248 	rBusmasterCfg1.ReRequest = (unsigned char) pSettings->usReRequest;
249 	rBusmasterCfg1.MEMCS16 = pSettings->bEnableMEMCS16;
250 	rBusmasterCfg2.IsaMemCmdWidth =
251 		(unsigned char) pSettings->usIsaMemCmdWidth;
252 
253 
254 	rIsaProtCfg.Reserved = 0;
255 	rIsaProtCfg.GateIOCHRDY = pSettings->bGateIOCHRDY;
256 
257 	rPowerMgmtCfg.Reserved = 0;
258 	rPowerMgmtCfg.Enable = pSettings->bEnablePwrMgmt;
259 
260 	rHBusTimerCfg.LoadValue =
261 		(unsigned char) pSettings->usHBusTimerLoadValue;
262 
263 	rLBusTimeoutDisable.Reserved = 0;
264 	rLBusTimeoutDisable.DisableTimeout =
265 		pSettings->bDisableLBusTimeout;
266 
267 	MKWORD(rChipReset) = ~pSettings->usChipletEnable;
268 
269 	rClockControl1.Reserved1 = rClockControl1.Reserved2 = 0;
270 	rClockControl1.N_Divisor = pSettings->usN_Divisor;
271 	rClockControl1.M_Multiplier = pSettings->usM_Multiplier;
272 
273 	rClockControl2.Reserved = 0;
274 	rClockControl2.PllBypass = pSettings->bPllBypass;
275 
276 	/* Issue a soft reset to the chip */
277 	/* Note: Since we may be coming in with 3780i clocks suspended, we must keep
278 	* soft-reset active for 10ms.
279 	*/
280 	rSlaveControl.ClockControl = 0;
281 	rSlaveControl.SoftReset = true;
282 	rSlaveControl.ConfigMode = false;
283 	rSlaveControl.Reserved = 0;
284 
285 	PRINTK_4(TRACE_3780I,
286 		"3780i::dsp3780i_EnableDSP usDspBaseIO %x index %x taddr %x\n",
287 		usDspBaseIO, DSP_IsaSlaveControl,
288 		usDspBaseIO + DSP_IsaSlaveControl);
289 
290 	PRINTK_2(TRACE_3780I,
291 		"3780i::dsp3780i_EnableDSP rSlaveContrl %x\n",
292 		MKWORD(rSlaveControl));
293 
294 	spin_lock_irqsave(&dsp_lock, flags);
295 	OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
296 	MKWORD(tval) = InWordDsp(DSP_IsaSlaveControl);
297 
298 	PRINTK_2(TRACE_3780I,
299 		"3780i::dsp3780i_EnableDSP rSlaveControl 2 %x\n", tval);
300 
301 
302 	for (i = 0; i < 11; i++)
303 		udelay(2000);
304 
305 	rSlaveControl.SoftReset = false;
306 	OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
307 
308 	MKWORD(tval) = InWordDsp(DSP_IsaSlaveControl);
309 
310 	PRINTK_2(TRACE_3780I,
311 		"3780i::dsp3780i_EnableDSP rSlaveControl 3 %x\n", tval);
312 
313 
314 	/* Program our general configuration registers */
315 	WriteGenCfg(DSP_HBridgeCfg1Index, MKBYTE(rHBridgeCfg1));
316 	WriteGenCfg(DSP_HBridgeCfg2Index, MKBYTE(rHBridgeCfg2));
317 	WriteGenCfg(DSP_BusMasterCfg1Index, MKBYTE(rBusmasterCfg1));
318 	WriteGenCfg(DSP_BusMasterCfg2Index, MKBYTE(rBusmasterCfg2));
319 	WriteGenCfg(DSP_IsaProtCfgIndex, MKBYTE(rIsaProtCfg));
320 	WriteGenCfg(DSP_PowerMgCfgIndex, MKBYTE(rPowerMgmtCfg));
321 	WriteGenCfg(DSP_HBusTimerCfgIndex, MKBYTE(rHBusTimerCfg));
322 
323 	if (pSettings->bModemEnabled) {
324 		WriteGenCfg(DSP_UartCfg1Index, MKBYTE(rUartCfg1));
325 		WriteGenCfg(DSP_UartCfg2Index, MKBYTE(rUartCfg2));
326 	}
327 
328 
329 	rHBridgeControl.EnableDspInt = false;
330 	rHBridgeControl.MemAutoInc = true;
331 	rHBridgeControl.IoAutoInc = false;
332 	rHBridgeControl.DiagnosticMode = false;
333 
334 	PRINTK_3(TRACE_3780I,
335 		"3780i::dsp3780i_EnableDSP DSP_HBridgeControl %x rHBridgeControl %x\n",
336 		DSP_HBridgeControl, MKWORD(rHBridgeControl));
337 
338 	OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
339 	spin_unlock_irqrestore(&dsp_lock, flags);
340 	WriteMsaCfg(DSP_LBusTimeoutDisable, MKWORD(rLBusTimeoutDisable));
341 	WriteMsaCfg(DSP_ClockControl_1, MKWORD(rClockControl1));
342 	WriteMsaCfg(DSP_ClockControl_2, MKWORD(rClockControl2));
343 	WriteMsaCfg(DSP_ChipReset, MKWORD(rChipReset));
344 
345 	ChipID = ReadMsaCfg(DSP_ChipID);
346 
347 	PRINTK_2(TRACE_3780I,
348 		"3780i::dsp3780I_EnableDSP exiting bRC=true, ChipID %x\n",
349 		ChipID);
350 
351 	return 0;
352 }
353 
354 int dsp3780I_DisableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings)
355 {
356 	unsigned long flags;
357 	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
358 	DSP_ISA_SLAVE_CONTROL rSlaveControl;
359 
360 
361 	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_DisableDSP entry\n");
362 
363 	rSlaveControl.ClockControl = 0;
364 	rSlaveControl.SoftReset = true;
365 	rSlaveControl.ConfigMode = false;
366 	rSlaveControl.Reserved = 0;
367 	spin_lock_irqsave(&dsp_lock, flags);
368 	OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
369 
370 	udelay(5);
371 
372 	rSlaveControl.ClockControl = 1;
373 	OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
374 	spin_unlock_irqrestore(&dsp_lock, flags);
375 
376 	udelay(5);
377 
378 
379 	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_DisableDSP exit\n");
380 
381 	return 0;
382 }
383 
384 int dsp3780I_Reset(DSP_3780I_CONFIG_SETTINGS * pSettings)
385 {
386 	unsigned long flags;
387 	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
388 	DSP_BOOT_DOMAIN rBootDomain;
389 	DSP_HBRIDGE_CONTROL rHBridgeControl;
390 
391 
392 	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Reset entry\n");
393 
394 	spin_lock_irqsave(&dsp_lock, flags);
395 	/* Mask DSP to PC interrupt */
396 	MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
397 
398 	PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Reset rHBridgeControl %x\n",
399 		MKWORD(rHBridgeControl));
400 
401 	rHBridgeControl.EnableDspInt = false;
402 	OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
403 	spin_unlock_irqrestore(&dsp_lock, flags);
404 
405 	/* Reset the core via the boot domain register */
406 	rBootDomain.ResetCore = true;
407 	rBootDomain.Halt = true;
408 	rBootDomain.NMI = true;
409 	rBootDomain.Reserved = 0;
410 
411 	PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Reset rBootDomain %x\n",
412 		MKWORD(rBootDomain));
413 
414 	WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
415 
416 	/* Reset all the chiplets and then reactivate them */
417 	WriteMsaCfg(DSP_ChipReset, 0xFFFF);
418 	udelay(5);
419 	WriteMsaCfg(DSP_ChipReset,
420 			(unsigned short) (~pSettings->usChipletEnable));
421 
422 
423 	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Reset exit bRC=0\n");
424 
425 	return 0;
426 }
427 
428 
429 int dsp3780I_Run(DSP_3780I_CONFIG_SETTINGS * pSettings)
430 {
431 	unsigned long flags;
432 	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
433 	DSP_BOOT_DOMAIN rBootDomain;
434 	DSP_HBRIDGE_CONTROL rHBridgeControl;
435 
436 
437 	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Run entry\n");
438 
439 
440 	/* Transition the core to a running state */
441 	rBootDomain.ResetCore = true;
442 	rBootDomain.Halt = false;
443 	rBootDomain.NMI = true;
444 	rBootDomain.Reserved = 0;
445 	WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
446 
447 	udelay(5);
448 
449 	rBootDomain.ResetCore = false;
450 	WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
451 	udelay(5);
452 
453 	rBootDomain.NMI = false;
454 	WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
455 	udelay(5);
456 
457 	/* Enable DSP to PC interrupt */
458 	spin_lock_irqsave(&dsp_lock, flags);
459 	MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
460 	rHBridgeControl.EnableDspInt = true;
461 
462 	PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Run rHBridgeControl %x\n",
463 		MKWORD(rHBridgeControl));
464 
465 	OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
466 	spin_unlock_irqrestore(&dsp_lock, flags);
467 
468 
469 	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Run exit bRC=true\n");
470 
471 	return 0;
472 }
473 
474 
475 int dsp3780I_ReadDStore(unsigned short usDspBaseIO, void __user *pvBuffer,
476                         unsigned uCount, unsigned long ulDSPAddr)
477 {
478 	unsigned long flags;
479 	unsigned short __user *pusBuffer = pvBuffer;
480 	unsigned short val;
481 
482 
483 	PRINTK_5(TRACE_3780I,
484 		"3780i::dsp3780I_ReadDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n",
485 		usDspBaseIO, pusBuffer, uCount, ulDSPAddr);
486 
487 
488 	/* Set the initial MSA address. No adjustments need to be made to data store addresses */
489 	spin_lock_irqsave(&dsp_lock, flags);
490 	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
491 	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
492 	spin_unlock_irqrestore(&dsp_lock, flags);
493 
494 	/* Transfer the memory block */
495 	while (uCount-- != 0) {
496 		spin_lock_irqsave(&dsp_lock, flags);
497 		val = InWordDsp(DSP_MsaDataDSISHigh);
498 		spin_unlock_irqrestore(&dsp_lock, flags);
499 		if(put_user(val, pusBuffer++))
500 			return -EFAULT;
501 
502 		PRINTK_3(TRACE_3780I,
503 			"3780I::dsp3780I_ReadDStore uCount %x val %x\n",
504 			uCount, val);
505 
506 		PaceMsaAccess(usDspBaseIO);
507 	}
508 
509 
510 	PRINTK_1(TRACE_3780I,
511 		"3780I::dsp3780I_ReadDStore exit bRC=true\n");
512 
513 	return 0;
514 }
515 
516 int dsp3780I_ReadAndClearDStore(unsigned short usDspBaseIO,
517                                 void __user *pvBuffer, unsigned uCount,
518                                 unsigned long ulDSPAddr)
519 {
520 	unsigned long flags;
521 	unsigned short __user *pusBuffer = pvBuffer;
522 	unsigned short val;
523 
524 
525 	PRINTK_5(TRACE_3780I,
526 		"3780i::dsp3780I_ReadAndDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n",
527 		usDspBaseIO, pusBuffer, uCount, ulDSPAddr);
528 
529 
530 	/* Set the initial MSA address. No adjustments need to be made to data store addresses */
531 	spin_lock_irqsave(&dsp_lock, flags);
532 	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
533 	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
534 	spin_unlock_irqrestore(&dsp_lock, flags);
535 
536 	/* Transfer the memory block */
537 	while (uCount-- != 0) {
538 		spin_lock_irqsave(&dsp_lock, flags);
539 		val = InWordDsp(DSP_ReadAndClear);
540 		spin_unlock_irqrestore(&dsp_lock, flags);
541 		if(put_user(val, pusBuffer++))
542 			return -EFAULT;
543 
544 		PRINTK_3(TRACE_3780I,
545 			"3780I::dsp3780I_ReadAndCleanDStore uCount %x val %x\n",
546 			uCount, val);
547 
548 		PaceMsaAccess(usDspBaseIO);
549 	}
550 
551 
552 	PRINTK_1(TRACE_3780I,
553 		"3780I::dsp3780I_ReadAndClearDStore exit bRC=true\n");
554 
555 	return 0;
556 }
557 
558 
559 int dsp3780I_WriteDStore(unsigned short usDspBaseIO, void __user *pvBuffer,
560                          unsigned uCount, unsigned long ulDSPAddr)
561 {
562 	unsigned long flags;
563 	unsigned short __user *pusBuffer = pvBuffer;
564 
565 
566 	PRINTK_5(TRACE_3780I,
567 		"3780i::dsp3780D_WriteDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n",
568 		usDspBaseIO, pusBuffer, uCount, ulDSPAddr);
569 
570 
571 	/* Set the initial MSA address. No adjustments need to be made to data store addresses */
572 	spin_lock_irqsave(&dsp_lock, flags);
573 	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
574 	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
575 	spin_unlock_irqrestore(&dsp_lock, flags);
576 
577 	/* Transfer the memory block */
578 	while (uCount-- != 0) {
579 		unsigned short val;
580 		if(get_user(val, pusBuffer++))
581 			return -EFAULT;
582 		spin_lock_irqsave(&dsp_lock, flags);
583 		OutWordDsp(DSP_MsaDataDSISHigh, val);
584 		spin_unlock_irqrestore(&dsp_lock, flags);
585 
586 		PRINTK_3(TRACE_3780I,
587 			"3780I::dsp3780I_WriteDStore uCount %x val %x\n",
588 			uCount, val);
589 
590 		PaceMsaAccess(usDspBaseIO);
591 	}
592 
593 
594 	PRINTK_1(TRACE_3780I,
595 		"3780I::dsp3780D_WriteDStore exit bRC=true\n");
596 
597 	return 0;
598 }
599 
600 
601 int dsp3780I_ReadIStore(unsigned short usDspBaseIO, void __user *pvBuffer,
602                         unsigned uCount, unsigned long ulDSPAddr)
603 {
604 	unsigned long flags;
605 	unsigned short __user *pusBuffer = pvBuffer;
606 
607 	PRINTK_5(TRACE_3780I,
608 		"3780i::dsp3780I_ReadIStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n",
609 		usDspBaseIO, pusBuffer, uCount, ulDSPAddr);
610 
611 	/*
612 	* Set the initial MSA address. To convert from an instruction store
613 	* address to an MSA address
614 	* shift the address two bits to the left and set bit 22
615 	*/
616 	ulDSPAddr = (ulDSPAddr << 2) | (1 << 22);
617 	spin_lock_irqsave(&dsp_lock, flags);
618 	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
619 	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
620 	spin_unlock_irqrestore(&dsp_lock, flags);
621 
622 	/* Transfer the memory block */
623 	while (uCount-- != 0) {
624 		unsigned short val_lo, val_hi;
625 		spin_lock_irqsave(&dsp_lock, flags);
626 		val_lo = InWordDsp(DSP_MsaDataISLow);
627 		val_hi = InWordDsp(DSP_MsaDataDSISHigh);
628 		spin_unlock_irqrestore(&dsp_lock, flags);
629 		if(put_user(val_lo, pusBuffer++))
630 			return -EFAULT;
631 		if(put_user(val_hi, pusBuffer++))
632 			return -EFAULT;
633 
634 		PRINTK_4(TRACE_3780I,
635 			"3780I::dsp3780I_ReadIStore uCount %x val_lo %x val_hi %x\n",
636 			uCount, val_lo, val_hi);
637 
638 		PaceMsaAccess(usDspBaseIO);
639 
640 	}
641 
642 	PRINTK_1(TRACE_3780I,
643 		"3780I::dsp3780I_ReadIStore exit bRC=true\n");
644 
645 	return 0;
646 }
647 
648 
649 int dsp3780I_WriteIStore(unsigned short usDspBaseIO, void __user *pvBuffer,
650                          unsigned uCount, unsigned long ulDSPAddr)
651 {
652 	unsigned long flags;
653 	unsigned short __user *pusBuffer = pvBuffer;
654 
655 	PRINTK_5(TRACE_3780I,
656 		"3780i::dsp3780I_WriteIStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n",
657 		usDspBaseIO, pusBuffer, uCount, ulDSPAddr);
658 
659 
660 	/*
661 	* Set the initial MSA address. To convert from an instruction store
662 	* address to an MSA address
663 	* shift the address two bits to the left and set bit 22
664 	*/
665 	ulDSPAddr = (ulDSPAddr << 2) | (1 << 22);
666 	spin_lock_irqsave(&dsp_lock, flags);
667 	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
668 	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
669 	spin_unlock_irqrestore(&dsp_lock, flags);
670 
671 	/* Transfer the memory block */
672 	while (uCount-- != 0) {
673 		unsigned short val_lo, val_hi;
674 		if(get_user(val_lo, pusBuffer++))
675 			return -EFAULT;
676 		if(get_user(val_hi, pusBuffer++))
677 			return -EFAULT;
678 		spin_lock_irqsave(&dsp_lock, flags);
679 		OutWordDsp(DSP_MsaDataISLow, val_lo);
680 		OutWordDsp(DSP_MsaDataDSISHigh, val_hi);
681 		spin_unlock_irqrestore(&dsp_lock, flags);
682 
683 		PRINTK_4(TRACE_3780I,
684 			"3780I::dsp3780I_WriteIStore uCount %x val_lo %x val_hi %x\n",
685 			uCount, val_lo, val_hi);
686 
687 		PaceMsaAccess(usDspBaseIO);
688 
689 	}
690 
691 	PRINTK_1(TRACE_3780I,
692 		"3780I::dsp3780I_WriteIStore exit bRC=true\n");
693 
694 	return 0;
695 }
696 
697 
698 int dsp3780I_GetIPCSource(unsigned short usDspBaseIO,
699                           unsigned short *pusIPCSource)
700 {
701 	unsigned long flags;
702 	DSP_HBRIDGE_CONTROL rHBridgeControl;
703 	unsigned short temp;
704 
705 
706 	PRINTK_3(TRACE_3780I,
707 		"3780i::dsp3780I_GetIPCSource entry usDspBaseIO %x pusIPCSource %p\n",
708 		usDspBaseIO, pusIPCSource);
709 
710 	/*
711 	* Disable DSP to PC interrupts, read the interrupt register,
712 	* clear the pending IPC bits, and reenable DSP to PC interrupts
713 	*/
714 	spin_lock_irqsave(&dsp_lock, flags);
715 	MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
716 	rHBridgeControl.EnableDspInt = false;
717 	OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
718 
719 	*pusIPCSource = InWordDsp(DSP_Interrupt);
720 	temp = (unsigned short) ~(*pusIPCSource);
721 
722 	PRINTK_3(TRACE_3780I,
723 		"3780i::dsp3780I_GetIPCSource, usIPCSource %x ~ %x\n",
724 		*pusIPCSource, temp);
725 
726 	OutWordDsp(DSP_Interrupt, (unsigned short) ~(*pusIPCSource));
727 
728 	rHBridgeControl.EnableDspInt = true;
729 	OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
730 	spin_unlock_irqrestore(&dsp_lock, flags);
731 
732 
733 	PRINTK_2(TRACE_3780I,
734 		"3780i::dsp3780I_GetIPCSource exit usIPCSource %x\n",
735 		*pusIPCSource);
736 
737 	return 0;
738 }
739