xref: /openbmc/linux/drivers/char/ipmi/ipmi_ssif.c (revision ba61bb17)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * ipmi_ssif.c
4  *
5  * The interface to the IPMI driver for SMBus access to a SMBus
6  * compliant device.  Called SSIF by the IPMI spec.
7  *
8  * Author: Intel Corporation
9  *         Todd Davis <todd.c.davis@intel.com>
10  *
11  * Rewritten by Corey Minyard <minyard@acm.org> to support the
12  * non-blocking I2C interface, add support for multi-part
13  * transactions, add PEC support, and general clenaup.
14  *
15  * Copyright 2003 Intel Corporation
16  * Copyright 2005 MontaVista Software
17  */
18 
19 /*
20  * This file holds the "policy" for the interface to the SSIF state
21  * machine.  It does the configuration, handles timers and interrupts,
22  * and drives the real SSIF state machine.
23  */
24 
25 /*
26  * TODO: Figure out how to use SMB alerts.  This will require a new
27  * interface into the I2C driver, I believe.
28  */
29 
30 #if defined(MODVERSIONS)
31 #include <linux/modversions.h>
32 #endif
33 
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/sched.h>
37 #include <linux/seq_file.h>
38 #include <linux/timer.h>
39 #include <linux/delay.h>
40 #include <linux/errno.h>
41 #include <linux/spinlock.h>
42 #include <linux/slab.h>
43 #include <linux/list.h>
44 #include <linux/i2c.h>
45 #include <linux/ipmi_smi.h>
46 #include <linux/init.h>
47 #include <linux/dmi.h>
48 #include <linux/kthread.h>
49 #include <linux/acpi.h>
50 #include <linux/ctype.h>
51 #include <linux/time64.h>
52 #include "ipmi_si_sm.h"
53 #include "ipmi_dmi.h"
54 
55 #define PFX "ipmi_ssif: "
56 #define DEVICE_NAME "ipmi_ssif"
57 
58 #define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD	0x57
59 
60 #define	SSIF_IPMI_REQUEST			2
61 #define	SSIF_IPMI_MULTI_PART_REQUEST_START	6
62 #define	SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE	7
63 #define	SSIF_IPMI_RESPONSE			3
64 #define	SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE	9
65 
66 /* ssif_debug is a bit-field
67  *	SSIF_DEBUG_MSG -	commands and their responses
68  *	SSIF_DEBUG_STATES -	message states
69  *	SSIF_DEBUG_TIMING -	 Measure times between events in the driver
70  */
71 #define SSIF_DEBUG_TIMING	4
72 #define SSIF_DEBUG_STATE	2
73 #define SSIF_DEBUG_MSG		1
74 #define SSIF_NODEBUG		0
75 #define SSIF_DEFAULT_DEBUG	(SSIF_NODEBUG)
76 
77 /*
78  * Timer values
79  */
80 #define SSIF_MSG_USEC		20000	/* 20ms between message tries. */
81 #define SSIF_MSG_PART_USEC	5000	/* 5ms for a message part */
82 
83 /* How many times to we retry sending/receiving the message. */
84 #define	SSIF_SEND_RETRIES	5
85 #define	SSIF_RECV_RETRIES	250
86 
87 #define SSIF_MSG_MSEC		(SSIF_MSG_USEC / 1000)
88 #define SSIF_MSG_JIFFIES	((SSIF_MSG_USEC * 1000) / TICK_NSEC)
89 #define SSIF_MSG_PART_JIFFIES	((SSIF_MSG_PART_USEC * 1000) / TICK_NSEC)
90 
91 enum ssif_intf_state {
92 	SSIF_NORMAL,
93 	SSIF_GETTING_FLAGS,
94 	SSIF_GETTING_EVENTS,
95 	SSIF_CLEARING_FLAGS,
96 	SSIF_GETTING_MESSAGES,
97 	/* FIXME - add watchdog stuff. */
98 };
99 
100 #define SSIF_IDLE(ssif)	 ((ssif)->ssif_state == SSIF_NORMAL \
101 			  && (ssif)->curr_msg == NULL)
102 
103 /*
104  * Indexes into stats[] in ssif_info below.
105  */
106 enum ssif_stat_indexes {
107 	/* Number of total messages sent. */
108 	SSIF_STAT_sent_messages = 0,
109 
110 	/*
111 	 * Number of message parts sent.  Messages may be broken into
112 	 * parts if they are long.
113 	 */
114 	SSIF_STAT_sent_messages_parts,
115 
116 	/*
117 	 * Number of time a message was retried.
118 	 */
119 	SSIF_STAT_send_retries,
120 
121 	/*
122 	 * Number of times the send of a message failed.
123 	 */
124 	SSIF_STAT_send_errors,
125 
126 	/*
127 	 * Number of message responses received.
128 	 */
129 	SSIF_STAT_received_messages,
130 
131 	/*
132 	 * Number of message fragments received.
133 	 */
134 	SSIF_STAT_received_message_parts,
135 
136 	/*
137 	 * Number of times the receive of a message was retried.
138 	 */
139 	SSIF_STAT_receive_retries,
140 
141 	/*
142 	 * Number of errors receiving messages.
143 	 */
144 	SSIF_STAT_receive_errors,
145 
146 	/*
147 	 * Number of times a flag fetch was requested.
148 	 */
149 	SSIF_STAT_flag_fetches,
150 
151 	/*
152 	 * Number of times the hardware didn't follow the state machine.
153 	 */
154 	SSIF_STAT_hosed,
155 
156 	/*
157 	 * Number of received events.
158 	 */
159 	SSIF_STAT_events,
160 
161 	/* Number of asyncronous messages received. */
162 	SSIF_STAT_incoming_messages,
163 
164 	/* Number of watchdog pretimeouts. */
165 	SSIF_STAT_watchdog_pretimeouts,
166 
167 	/* Number of alers received. */
168 	SSIF_STAT_alerts,
169 
170 	/* Always add statistics before this value, it must be last. */
171 	SSIF_NUM_STATS
172 };
173 
174 struct ssif_addr_info {
175 	struct i2c_board_info binfo;
176 	char *adapter_name;
177 	int debug;
178 	int slave_addr;
179 	enum ipmi_addr_src addr_src;
180 	union ipmi_smi_info_union addr_info;
181 	struct device *dev;
182 	struct i2c_client *client;
183 
184 	struct mutex clients_mutex;
185 	struct list_head clients;
186 
187 	struct list_head link;
188 };
189 
190 struct ssif_info;
191 
192 typedef void (*ssif_i2c_done)(struct ssif_info *ssif_info, int result,
193 			     unsigned char *data, unsigned int len);
194 
195 struct ssif_info {
196 	struct ipmi_smi     *intf;
197 	spinlock_t	    lock;
198 	struct ipmi_smi_msg *waiting_msg;
199 	struct ipmi_smi_msg *curr_msg;
200 	enum ssif_intf_state ssif_state;
201 	unsigned long       ssif_debug;
202 
203 	struct ipmi_smi_handlers handlers;
204 
205 	enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */
206 	union ipmi_smi_info_union addr_info;
207 
208 	/*
209 	 * Flags from the last GET_MSG_FLAGS command, used when an ATTN
210 	 * is set to hold the flags until we are done handling everything
211 	 * from the flags.
212 	 */
213 #define RECEIVE_MSG_AVAIL	0x01
214 #define EVENT_MSG_BUFFER_FULL	0x02
215 #define WDT_PRE_TIMEOUT_INT	0x08
216 	unsigned char       msg_flags;
217 
218 	u8		    global_enables;
219 	bool		    has_event_buffer;
220 	bool		    supports_alert;
221 
222 	/*
223 	 * Used to tell what we should do with alerts.  If we are
224 	 * waiting on a response, read the data immediately.
225 	 */
226 	bool		    got_alert;
227 	bool		    waiting_alert;
228 
229 	/*
230 	 * If set to true, this will request events the next time the
231 	 * state machine is idle.
232 	 */
233 	bool                req_events;
234 
235 	/*
236 	 * If set to true, this will request flags the next time the
237 	 * state machine is idle.
238 	 */
239 	bool                req_flags;
240 
241 	/*
242 	 * Used to perform timer operations when run-to-completion
243 	 * mode is on.  This is a countdown timer.
244 	 */
245 	int                 rtc_us_timer;
246 
247 	/* Used for sending/receiving data.  +1 for the length. */
248 	unsigned char data[IPMI_MAX_MSG_LENGTH + 1];
249 	unsigned int  data_len;
250 
251 	/* Temp receive buffer, gets copied into data. */
252 	unsigned char recv[I2C_SMBUS_BLOCK_MAX];
253 
254 	struct i2c_client *client;
255 	ssif_i2c_done done_handler;
256 
257 	/* Thread interface handling */
258 	struct task_struct *thread;
259 	struct completion wake_thread;
260 	bool stopping;
261 	int i2c_read_write;
262 	int i2c_command;
263 	unsigned char *i2c_data;
264 	unsigned int i2c_size;
265 
266 	struct timer_list retry_timer;
267 	int retries_left;
268 
269 	/* Info from SSIF cmd */
270 	unsigned char max_xmit_msg_size;
271 	unsigned char max_recv_msg_size;
272 	unsigned int  multi_support;
273 	int           supports_pec;
274 
275 #define SSIF_NO_MULTI		0
276 #define SSIF_MULTI_2_PART	1
277 #define SSIF_MULTI_n_PART	2
278 	unsigned char *multi_data;
279 	unsigned int  multi_len;
280 	unsigned int  multi_pos;
281 
282 	atomic_t stats[SSIF_NUM_STATS];
283 };
284 
285 #define ssif_inc_stat(ssif, stat) \
286 	atomic_inc(&(ssif)->stats[SSIF_STAT_ ## stat])
287 #define ssif_get_stat(ssif, stat) \
288 	((unsigned int) atomic_read(&(ssif)->stats[SSIF_STAT_ ## stat]))
289 
290 static bool initialized;
291 
292 static void return_hosed_msg(struct ssif_info *ssif_info,
293 			     struct ipmi_smi_msg *msg);
294 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags);
295 static int start_send(struct ssif_info *ssif_info,
296 		      unsigned char   *data,
297 		      unsigned int    len);
298 
299 static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info,
300 					  unsigned long *flags)
301 {
302 	spin_lock_irqsave(&ssif_info->lock, *flags);
303 	return flags;
304 }
305 
306 static void ipmi_ssif_unlock_cond(struct ssif_info *ssif_info,
307 				  unsigned long *flags)
308 {
309 	spin_unlock_irqrestore(&ssif_info->lock, *flags);
310 }
311 
312 static void deliver_recv_msg(struct ssif_info *ssif_info,
313 			     struct ipmi_smi_msg *msg)
314 {
315 	if (msg->rsp_size < 0) {
316 		return_hosed_msg(ssif_info, msg);
317 		pr_err(PFX
318 		       "Malformed message in deliver_recv_msg: rsp_size = %d\n",
319 		       msg->rsp_size);
320 	} else {
321 		ipmi_smi_msg_received(ssif_info->intf, msg);
322 	}
323 }
324 
325 static void return_hosed_msg(struct ssif_info *ssif_info,
326 			     struct ipmi_smi_msg *msg)
327 {
328 	ssif_inc_stat(ssif_info, hosed);
329 
330 	/* Make it a response */
331 	msg->rsp[0] = msg->data[0] | 4;
332 	msg->rsp[1] = msg->data[1];
333 	msg->rsp[2] = 0xFF; /* Unknown error. */
334 	msg->rsp_size = 3;
335 
336 	deliver_recv_msg(ssif_info, msg);
337 }
338 
339 /*
340  * Must be called with the message lock held.  This will release the
341  * message lock.  Note that the caller will check SSIF_IDLE and start a
342  * new operation, so there is no need to check for new messages to
343  * start in here.
344  */
345 static void start_clear_flags(struct ssif_info *ssif_info, unsigned long *flags)
346 {
347 	unsigned char msg[3];
348 
349 	ssif_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
350 	ssif_info->ssif_state = SSIF_CLEARING_FLAGS;
351 	ipmi_ssif_unlock_cond(ssif_info, flags);
352 
353 	/* Make sure the watchdog pre-timeout flag is not set at startup. */
354 	msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
355 	msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
356 	msg[2] = WDT_PRE_TIMEOUT_INT;
357 
358 	if (start_send(ssif_info, msg, 3) != 0) {
359 		/* Error, just go to normal state. */
360 		ssif_info->ssif_state = SSIF_NORMAL;
361 	}
362 }
363 
364 static void start_flag_fetch(struct ssif_info *ssif_info, unsigned long *flags)
365 {
366 	unsigned char mb[2];
367 
368 	ssif_info->req_flags = false;
369 	ssif_info->ssif_state = SSIF_GETTING_FLAGS;
370 	ipmi_ssif_unlock_cond(ssif_info, flags);
371 
372 	mb[0] = (IPMI_NETFN_APP_REQUEST << 2);
373 	mb[1] = IPMI_GET_MSG_FLAGS_CMD;
374 	if (start_send(ssif_info, mb, 2) != 0)
375 		ssif_info->ssif_state = SSIF_NORMAL;
376 }
377 
378 static void check_start_send(struct ssif_info *ssif_info, unsigned long *flags,
379 			     struct ipmi_smi_msg *msg)
380 {
381 	if (start_send(ssif_info, msg->data, msg->data_size) != 0) {
382 		unsigned long oflags;
383 
384 		flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
385 		ssif_info->curr_msg = NULL;
386 		ssif_info->ssif_state = SSIF_NORMAL;
387 		ipmi_ssif_unlock_cond(ssif_info, flags);
388 		ipmi_free_smi_msg(msg);
389 	}
390 }
391 
392 static void start_event_fetch(struct ssif_info *ssif_info, unsigned long *flags)
393 {
394 	struct ipmi_smi_msg *msg;
395 
396 	ssif_info->req_events = false;
397 
398 	msg = ipmi_alloc_smi_msg();
399 	if (!msg) {
400 		ssif_info->ssif_state = SSIF_NORMAL;
401 		ipmi_ssif_unlock_cond(ssif_info, flags);
402 		return;
403 	}
404 
405 	ssif_info->curr_msg = msg;
406 	ssif_info->ssif_state = SSIF_GETTING_EVENTS;
407 	ipmi_ssif_unlock_cond(ssif_info, flags);
408 
409 	msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
410 	msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
411 	msg->data_size = 2;
412 
413 	check_start_send(ssif_info, flags, msg);
414 }
415 
416 static void start_recv_msg_fetch(struct ssif_info *ssif_info,
417 				 unsigned long *flags)
418 {
419 	struct ipmi_smi_msg *msg;
420 
421 	msg = ipmi_alloc_smi_msg();
422 	if (!msg) {
423 		ssif_info->ssif_state = SSIF_NORMAL;
424 		ipmi_ssif_unlock_cond(ssif_info, flags);
425 		return;
426 	}
427 
428 	ssif_info->curr_msg = msg;
429 	ssif_info->ssif_state = SSIF_GETTING_MESSAGES;
430 	ipmi_ssif_unlock_cond(ssif_info, flags);
431 
432 	msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
433 	msg->data[1] = IPMI_GET_MSG_CMD;
434 	msg->data_size = 2;
435 
436 	check_start_send(ssif_info, flags, msg);
437 }
438 
439 /*
440  * Must be called with the message lock held.  This will release the
441  * message lock.  Note that the caller will check SSIF_IDLE and start a
442  * new operation, so there is no need to check for new messages to
443  * start in here.
444  */
445 static void handle_flags(struct ssif_info *ssif_info, unsigned long *flags)
446 {
447 	if (ssif_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
448 		/* Watchdog pre-timeout */
449 		ssif_inc_stat(ssif_info, watchdog_pretimeouts);
450 		start_clear_flags(ssif_info, flags);
451 		ipmi_smi_watchdog_pretimeout(ssif_info->intf);
452 	} else if (ssif_info->msg_flags & RECEIVE_MSG_AVAIL)
453 		/* Messages available. */
454 		start_recv_msg_fetch(ssif_info, flags);
455 	else if (ssif_info->msg_flags & EVENT_MSG_BUFFER_FULL)
456 		/* Events available. */
457 		start_event_fetch(ssif_info, flags);
458 	else {
459 		ssif_info->ssif_state = SSIF_NORMAL;
460 		ipmi_ssif_unlock_cond(ssif_info, flags);
461 	}
462 }
463 
464 static int ipmi_ssif_thread(void *data)
465 {
466 	struct ssif_info *ssif_info = data;
467 
468 	while (!kthread_should_stop()) {
469 		int result;
470 
471 		/* Wait for something to do */
472 		result = wait_for_completion_interruptible(
473 						&ssif_info->wake_thread);
474 		if (ssif_info->stopping)
475 			break;
476 		if (result == -ERESTARTSYS)
477 			continue;
478 		init_completion(&ssif_info->wake_thread);
479 
480 		if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) {
481 			result = i2c_smbus_write_block_data(
482 				ssif_info->client, ssif_info->i2c_command,
483 				ssif_info->i2c_data[0],
484 				ssif_info->i2c_data + 1);
485 			ssif_info->done_handler(ssif_info, result, NULL, 0);
486 		} else {
487 			result = i2c_smbus_read_block_data(
488 				ssif_info->client, ssif_info->i2c_command,
489 				ssif_info->i2c_data);
490 			if (result < 0)
491 				ssif_info->done_handler(ssif_info, result,
492 							NULL, 0);
493 			else
494 				ssif_info->done_handler(ssif_info, 0,
495 							ssif_info->i2c_data,
496 							result);
497 		}
498 	}
499 
500 	return 0;
501 }
502 
503 static int ssif_i2c_send(struct ssif_info *ssif_info,
504 			ssif_i2c_done handler,
505 			int read_write, int command,
506 			unsigned char *data, unsigned int size)
507 {
508 	ssif_info->done_handler = handler;
509 
510 	ssif_info->i2c_read_write = read_write;
511 	ssif_info->i2c_command = command;
512 	ssif_info->i2c_data = data;
513 	ssif_info->i2c_size = size;
514 	complete(&ssif_info->wake_thread);
515 	return 0;
516 }
517 
518 
519 static void msg_done_handler(struct ssif_info *ssif_info, int result,
520 			     unsigned char *data, unsigned int len);
521 
522 static void start_get(struct ssif_info *ssif_info)
523 {
524 	int rv;
525 
526 	ssif_info->rtc_us_timer = 0;
527 	ssif_info->multi_pos = 0;
528 
529 	rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
530 			  SSIF_IPMI_RESPONSE,
531 			  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
532 	if (rv < 0) {
533 		/* request failed, just return the error. */
534 		if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
535 			pr_info("Error from i2c_non_blocking_op(5)\n");
536 
537 		msg_done_handler(ssif_info, -EIO, NULL, 0);
538 	}
539 }
540 
541 static void retry_timeout(struct timer_list *t)
542 {
543 	struct ssif_info *ssif_info = from_timer(ssif_info, t, retry_timer);
544 	unsigned long oflags, *flags;
545 	bool waiting;
546 
547 	if (ssif_info->stopping)
548 		return;
549 
550 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
551 	waiting = ssif_info->waiting_alert;
552 	ssif_info->waiting_alert = false;
553 	ipmi_ssif_unlock_cond(ssif_info, flags);
554 
555 	if (waiting)
556 		start_get(ssif_info);
557 }
558 
559 
560 static void ssif_alert(struct i2c_client *client, enum i2c_alert_protocol type,
561 		       unsigned int data)
562 {
563 	struct ssif_info *ssif_info = i2c_get_clientdata(client);
564 	unsigned long oflags, *flags;
565 	bool do_get = false;
566 
567 	if (type != I2C_PROTOCOL_SMBUS_ALERT)
568 		return;
569 
570 	ssif_inc_stat(ssif_info, alerts);
571 
572 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
573 	if (ssif_info->waiting_alert) {
574 		ssif_info->waiting_alert = false;
575 		del_timer(&ssif_info->retry_timer);
576 		do_get = true;
577 	} else if (ssif_info->curr_msg) {
578 		ssif_info->got_alert = true;
579 	}
580 	ipmi_ssif_unlock_cond(ssif_info, flags);
581 	if (do_get)
582 		start_get(ssif_info);
583 }
584 
585 static int start_resend(struct ssif_info *ssif_info);
586 
587 static void msg_done_handler(struct ssif_info *ssif_info, int result,
588 			     unsigned char *data, unsigned int len)
589 {
590 	struct ipmi_smi_msg *msg;
591 	unsigned long oflags, *flags;
592 	int rv;
593 
594 	/*
595 	 * We are single-threaded here, so no need for a lock until we
596 	 * start messing with driver states or the queues.
597 	 */
598 
599 	if (result < 0) {
600 		ssif_info->retries_left--;
601 		if (ssif_info->retries_left > 0) {
602 			ssif_inc_stat(ssif_info, receive_retries);
603 
604 			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
605 			ssif_info->waiting_alert = true;
606 			ssif_info->rtc_us_timer = SSIF_MSG_USEC;
607 			mod_timer(&ssif_info->retry_timer,
608 				  jiffies + SSIF_MSG_JIFFIES);
609 			ipmi_ssif_unlock_cond(ssif_info, flags);
610 			return;
611 		}
612 
613 		ssif_inc_stat(ssif_info, receive_errors);
614 
615 		if  (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
616 			pr_info("Error in msg_done_handler: %d\n", result);
617 		len = 0;
618 		goto continue_op;
619 	}
620 
621 	if ((len > 1) && (ssif_info->multi_pos == 0)
622 				&& (data[0] == 0x00) && (data[1] == 0x01)) {
623 		/* Start of multi-part read.  Start the next transaction. */
624 		int i;
625 
626 		ssif_inc_stat(ssif_info, received_message_parts);
627 
628 		/* Remove the multi-part read marker. */
629 		len -= 2;
630 		for (i = 0; i < len; i++)
631 			ssif_info->data[i] = data[i+2];
632 		ssif_info->multi_len = len;
633 		ssif_info->multi_pos = 1;
634 
635 		rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
636 				  SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
637 				  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
638 		if (rv < 0) {
639 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
640 				pr_info("Error from i2c_non_blocking_op(1)\n");
641 
642 			result = -EIO;
643 		} else
644 			return;
645 	} else if (ssif_info->multi_pos) {
646 		/* Middle of multi-part read.  Start the next transaction. */
647 		int i;
648 		unsigned char blocknum;
649 
650 		if (len == 0) {
651 			result = -EIO;
652 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
653 				pr_info(PFX "Middle message with no data\n");
654 
655 			goto continue_op;
656 		}
657 
658 		blocknum = data[0];
659 
660 		if (ssif_info->multi_len + len - 1 > IPMI_MAX_MSG_LENGTH) {
661 			/* Received message too big, abort the operation. */
662 			result = -E2BIG;
663 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
664 				pr_info("Received message too big\n");
665 
666 			goto continue_op;
667 		}
668 
669 		/* Remove the blocknum from the data. */
670 		len--;
671 		for (i = 0; i < len; i++)
672 			ssif_info->data[i + ssif_info->multi_len] = data[i + 1];
673 		ssif_info->multi_len += len;
674 		if (blocknum == 0xff) {
675 			/* End of read */
676 			len = ssif_info->multi_len;
677 			data = ssif_info->data;
678 		} else if (blocknum + 1 != ssif_info->multi_pos) {
679 			/*
680 			 * Out of sequence block, just abort.  Block
681 			 * numbers start at zero for the second block,
682 			 * but multi_pos starts at one, so the +1.
683 			 */
684 			result = -EIO;
685 		} else {
686 			ssif_inc_stat(ssif_info, received_message_parts);
687 
688 			ssif_info->multi_pos++;
689 
690 			rv = ssif_i2c_send(ssif_info, msg_done_handler,
691 					   I2C_SMBUS_READ,
692 					   SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
693 					   ssif_info->recv,
694 					   I2C_SMBUS_BLOCK_DATA);
695 			if (rv < 0) {
696 				if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
697 					pr_info(PFX
698 						"Error from ssif_i2c_send\n");
699 
700 				result = -EIO;
701 			} else
702 				return;
703 		}
704 	}
705 
706 	if (result < 0) {
707 		ssif_inc_stat(ssif_info, receive_errors);
708 	} else {
709 		ssif_inc_stat(ssif_info, received_messages);
710 		ssif_inc_stat(ssif_info, received_message_parts);
711 	}
712 
713 
714  continue_op:
715 	if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
716 		pr_info(PFX "DONE 1: state = %d, result=%d.\n",
717 			ssif_info->ssif_state, result);
718 
719 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
720 	msg = ssif_info->curr_msg;
721 	if (msg) {
722 		msg->rsp_size = len;
723 		if (msg->rsp_size > IPMI_MAX_MSG_LENGTH)
724 			msg->rsp_size = IPMI_MAX_MSG_LENGTH;
725 		memcpy(msg->rsp, data, msg->rsp_size);
726 		ssif_info->curr_msg = NULL;
727 	}
728 
729 	switch (ssif_info->ssif_state) {
730 	case SSIF_NORMAL:
731 		ipmi_ssif_unlock_cond(ssif_info, flags);
732 		if (!msg)
733 			break;
734 
735 		if (result < 0)
736 			return_hosed_msg(ssif_info, msg);
737 		else
738 			deliver_recv_msg(ssif_info, msg);
739 		break;
740 
741 	case SSIF_GETTING_FLAGS:
742 		/* We got the flags from the SSIF, now handle them. */
743 		if ((result < 0) || (len < 4) || (data[2] != 0)) {
744 			/*
745 			 * Error fetching flags, or invalid length,
746 			 * just give up for now.
747 			 */
748 			ssif_info->ssif_state = SSIF_NORMAL;
749 			ipmi_ssif_unlock_cond(ssif_info, flags);
750 			pr_warn(PFX "Error getting flags: %d %d, %x\n",
751 			       result, len, (len >= 3) ? data[2] : 0);
752 		} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
753 			   || data[1] != IPMI_GET_MSG_FLAGS_CMD) {
754 			/*
755 			 * Don't abort here, maybe it was a queued
756 			 * response to a previous command.
757 			 */
758 			ipmi_ssif_unlock_cond(ssif_info, flags);
759 			pr_warn(PFX "Invalid response getting flags: %x %x\n",
760 				data[0], data[1]);
761 		} else {
762 			ssif_inc_stat(ssif_info, flag_fetches);
763 			ssif_info->msg_flags = data[3];
764 			handle_flags(ssif_info, flags);
765 		}
766 		break;
767 
768 	case SSIF_CLEARING_FLAGS:
769 		/* We cleared the flags. */
770 		if ((result < 0) || (len < 3) || (data[2] != 0)) {
771 			/* Error clearing flags */
772 			pr_warn(PFX "Error clearing flags: %d %d, %x\n",
773 			       result, len, (len >= 3) ? data[2] : 0);
774 		} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
775 			   || data[1] != IPMI_CLEAR_MSG_FLAGS_CMD) {
776 			pr_warn(PFX "Invalid response clearing flags: %x %x\n",
777 				data[0], data[1]);
778 		}
779 		ssif_info->ssif_state = SSIF_NORMAL;
780 		ipmi_ssif_unlock_cond(ssif_info, flags);
781 		break;
782 
783 	case SSIF_GETTING_EVENTS:
784 		if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
785 			/* Error getting event, probably done. */
786 			msg->done(msg);
787 
788 			/* Take off the event flag. */
789 			ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
790 			handle_flags(ssif_info, flags);
791 		} else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
792 			   || msg->rsp[1] != IPMI_READ_EVENT_MSG_BUFFER_CMD) {
793 			pr_warn(PFX "Invalid response getting events: %x %x\n",
794 				msg->rsp[0], msg->rsp[1]);
795 			msg->done(msg);
796 			/* Take off the event flag. */
797 			ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
798 			handle_flags(ssif_info, flags);
799 		} else {
800 			handle_flags(ssif_info, flags);
801 			ssif_inc_stat(ssif_info, events);
802 			deliver_recv_msg(ssif_info, msg);
803 		}
804 		break;
805 
806 	case SSIF_GETTING_MESSAGES:
807 		if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
808 			/* Error getting event, probably done. */
809 			msg->done(msg);
810 
811 			/* Take off the msg flag. */
812 			ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
813 			handle_flags(ssif_info, flags);
814 		} else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
815 			   || msg->rsp[1] != IPMI_GET_MSG_CMD) {
816 			pr_warn(PFX "Invalid response clearing flags: %x %x\n",
817 				msg->rsp[0], msg->rsp[1]);
818 			msg->done(msg);
819 
820 			/* Take off the msg flag. */
821 			ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
822 			handle_flags(ssif_info, flags);
823 		} else {
824 			ssif_inc_stat(ssif_info, incoming_messages);
825 			handle_flags(ssif_info, flags);
826 			deliver_recv_msg(ssif_info, msg);
827 		}
828 		break;
829 	}
830 
831 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
832 	if (SSIF_IDLE(ssif_info) && !ssif_info->stopping) {
833 		if (ssif_info->req_events)
834 			start_event_fetch(ssif_info, flags);
835 		else if (ssif_info->req_flags)
836 			start_flag_fetch(ssif_info, flags);
837 		else
838 			start_next_msg(ssif_info, flags);
839 	} else
840 		ipmi_ssif_unlock_cond(ssif_info, flags);
841 
842 	if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
843 		pr_info(PFX "DONE 2: state = %d.\n", ssif_info->ssif_state);
844 }
845 
846 static void msg_written_handler(struct ssif_info *ssif_info, int result,
847 				unsigned char *data, unsigned int len)
848 {
849 	int rv;
850 
851 	/* We are single-threaded here, so no need for a lock. */
852 	if (result < 0) {
853 		ssif_info->retries_left--;
854 		if (ssif_info->retries_left > 0) {
855 			if (!start_resend(ssif_info)) {
856 				ssif_inc_stat(ssif_info, send_retries);
857 				return;
858 			}
859 			/* request failed, just return the error. */
860 			ssif_inc_stat(ssif_info, send_errors);
861 
862 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
863 				pr_info(PFX
864 					"Out of retries in msg_written_handler\n");
865 			msg_done_handler(ssif_info, -EIO, NULL, 0);
866 			return;
867 		}
868 
869 		ssif_inc_stat(ssif_info, send_errors);
870 
871 		/*
872 		 * Got an error on transmit, let the done routine
873 		 * handle it.
874 		 */
875 		if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
876 			pr_info("Error in msg_written_handler: %d\n", result);
877 
878 		msg_done_handler(ssif_info, result, NULL, 0);
879 		return;
880 	}
881 
882 	if (ssif_info->multi_data) {
883 		/*
884 		 * In the middle of a multi-data write.  See the comment
885 		 * in the SSIF_MULTI_n_PART case in the probe function
886 		 * for details on the intricacies of this.
887 		 */
888 		int left;
889 		unsigned char *data_to_send;
890 
891 		ssif_inc_stat(ssif_info, sent_messages_parts);
892 
893 		left = ssif_info->multi_len - ssif_info->multi_pos;
894 		if (left > 32)
895 			left = 32;
896 		/* Length byte. */
897 		ssif_info->multi_data[ssif_info->multi_pos] = left;
898 		data_to_send = ssif_info->multi_data + ssif_info->multi_pos;
899 		ssif_info->multi_pos += left;
900 		if (left < 32)
901 			/*
902 			 * Write is finished.  Note that we must end
903 			 * with a write of less than 32 bytes to
904 			 * complete the transaction, even if it is
905 			 * zero bytes.
906 			 */
907 			ssif_info->multi_data = NULL;
908 
909 		rv = ssif_i2c_send(ssif_info, msg_written_handler,
910 				  I2C_SMBUS_WRITE,
911 				  SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
912 				  data_to_send,
913 				  I2C_SMBUS_BLOCK_DATA);
914 		if (rv < 0) {
915 			/* request failed, just return the error. */
916 			ssif_inc_stat(ssif_info, send_errors);
917 
918 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
919 				pr_info("Error from i2c_non_blocking_op(3)\n");
920 			msg_done_handler(ssif_info, -EIO, NULL, 0);
921 		}
922 	} else {
923 		/* Ready to request the result. */
924 		unsigned long oflags, *flags;
925 
926 		ssif_inc_stat(ssif_info, sent_messages);
927 		ssif_inc_stat(ssif_info, sent_messages_parts);
928 
929 		flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
930 		if (ssif_info->got_alert) {
931 			/* The result is already ready, just start it. */
932 			ssif_info->got_alert = false;
933 			ipmi_ssif_unlock_cond(ssif_info, flags);
934 			start_get(ssif_info);
935 		} else {
936 			/* Wait a jiffie then request the next message */
937 			ssif_info->waiting_alert = true;
938 			ssif_info->retries_left = SSIF_RECV_RETRIES;
939 			ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
940 			mod_timer(&ssif_info->retry_timer,
941 				  jiffies + SSIF_MSG_PART_JIFFIES);
942 			ipmi_ssif_unlock_cond(ssif_info, flags);
943 		}
944 	}
945 }
946 
947 static int start_resend(struct ssif_info *ssif_info)
948 {
949 	int rv;
950 	int command;
951 
952 	ssif_info->got_alert = false;
953 
954 	if (ssif_info->data_len > 32) {
955 		command = SSIF_IPMI_MULTI_PART_REQUEST_START;
956 		ssif_info->multi_data = ssif_info->data;
957 		ssif_info->multi_len = ssif_info->data_len;
958 		/*
959 		 * Subtle thing, this is 32, not 33, because we will
960 		 * overwrite the thing at position 32 (which was just
961 		 * transmitted) with the new length.
962 		 */
963 		ssif_info->multi_pos = 32;
964 		ssif_info->data[0] = 32;
965 	} else {
966 		ssif_info->multi_data = NULL;
967 		command = SSIF_IPMI_REQUEST;
968 		ssif_info->data[0] = ssif_info->data_len;
969 	}
970 
971 	rv = ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE,
972 			  command, ssif_info->data, I2C_SMBUS_BLOCK_DATA);
973 	if (rv && (ssif_info->ssif_debug & SSIF_DEBUG_MSG))
974 		pr_info("Error from i2c_non_blocking_op(4)\n");
975 	return rv;
976 }
977 
978 static int start_send(struct ssif_info *ssif_info,
979 		      unsigned char   *data,
980 		      unsigned int    len)
981 {
982 	if (len > IPMI_MAX_MSG_LENGTH)
983 		return -E2BIG;
984 	if (len > ssif_info->max_xmit_msg_size)
985 		return -E2BIG;
986 
987 	ssif_info->retries_left = SSIF_SEND_RETRIES;
988 	memcpy(ssif_info->data + 1, data, len);
989 	ssif_info->data_len = len;
990 	return start_resend(ssif_info);
991 }
992 
993 /* Must be called with the message lock held. */
994 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags)
995 {
996 	struct ipmi_smi_msg *msg;
997 	unsigned long oflags;
998 
999  restart:
1000 	if (!SSIF_IDLE(ssif_info)) {
1001 		ipmi_ssif_unlock_cond(ssif_info, flags);
1002 		return;
1003 	}
1004 
1005 	if (!ssif_info->waiting_msg) {
1006 		ssif_info->curr_msg = NULL;
1007 		ipmi_ssif_unlock_cond(ssif_info, flags);
1008 	} else {
1009 		int rv;
1010 
1011 		ssif_info->curr_msg = ssif_info->waiting_msg;
1012 		ssif_info->waiting_msg = NULL;
1013 		ipmi_ssif_unlock_cond(ssif_info, flags);
1014 		rv = start_send(ssif_info,
1015 				ssif_info->curr_msg->data,
1016 				ssif_info->curr_msg->data_size);
1017 		if (rv) {
1018 			msg = ssif_info->curr_msg;
1019 			ssif_info->curr_msg = NULL;
1020 			return_hosed_msg(ssif_info, msg);
1021 			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1022 			goto restart;
1023 		}
1024 	}
1025 }
1026 
1027 static void sender(void                *send_info,
1028 		   struct ipmi_smi_msg *msg)
1029 {
1030 	struct ssif_info *ssif_info = (struct ssif_info *) send_info;
1031 	unsigned long oflags, *flags;
1032 
1033 	BUG_ON(ssif_info->waiting_msg);
1034 	ssif_info->waiting_msg = msg;
1035 
1036 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1037 	start_next_msg(ssif_info, flags);
1038 
1039 	if (ssif_info->ssif_debug & SSIF_DEBUG_TIMING) {
1040 		struct timespec64 t;
1041 
1042 		ktime_get_real_ts64(&t);
1043 		pr_info("**Enqueue %02x %02x: %lld.%6.6ld\n",
1044 		       msg->data[0], msg->data[1],
1045 		       (long long) t.tv_sec, (long) t.tv_nsec / NSEC_PER_USEC);
1046 	}
1047 }
1048 
1049 static int get_smi_info(void *send_info, struct ipmi_smi_info *data)
1050 {
1051 	struct ssif_info *ssif_info = send_info;
1052 
1053 	data->addr_src = ssif_info->addr_source;
1054 	data->dev = &ssif_info->client->dev;
1055 	data->addr_info = ssif_info->addr_info;
1056 	get_device(data->dev);
1057 
1058 	return 0;
1059 }
1060 
1061 /*
1062  * Instead of having our own timer to periodically check the message
1063  * flags, we let the message handler drive us.
1064  */
1065 static void request_events(void *send_info)
1066 {
1067 	struct ssif_info *ssif_info = (struct ssif_info *) send_info;
1068 	unsigned long oflags, *flags;
1069 
1070 	if (!ssif_info->has_event_buffer)
1071 		return;
1072 
1073 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1074 	/*
1075 	 * Request flags first, not events, because the lower layer
1076 	 * doesn't have a way to send an attention.  But make sure
1077 	 * event checking still happens.
1078 	 */
1079 	ssif_info->req_events = true;
1080 	if (SSIF_IDLE(ssif_info))
1081 		start_flag_fetch(ssif_info, flags);
1082 	else {
1083 		ssif_info->req_flags = true;
1084 		ipmi_ssif_unlock_cond(ssif_info, flags);
1085 	}
1086 }
1087 
1088 static int ssif_start_processing(void            *send_info,
1089 				 struct ipmi_smi *intf)
1090 {
1091 	struct ssif_info *ssif_info = send_info;
1092 
1093 	ssif_info->intf = intf;
1094 
1095 	return 0;
1096 }
1097 
1098 #define MAX_SSIF_BMCS 4
1099 
1100 static unsigned short addr[MAX_SSIF_BMCS];
1101 static int num_addrs;
1102 module_param_array(addr, ushort, &num_addrs, 0);
1103 MODULE_PARM_DESC(addr, "The addresses to scan for IPMI BMCs on the SSIFs.");
1104 
1105 static char *adapter_name[MAX_SSIF_BMCS];
1106 static int num_adapter_names;
1107 module_param_array(adapter_name, charp, &num_adapter_names, 0);
1108 MODULE_PARM_DESC(adapter_name, "The string name of the I2C device that has the BMC.  By default all devices are scanned.");
1109 
1110 static int slave_addrs[MAX_SSIF_BMCS];
1111 static int num_slave_addrs;
1112 module_param_array(slave_addrs, int, &num_slave_addrs, 0);
1113 MODULE_PARM_DESC(slave_addrs,
1114 		 "The default IPMB slave address for the controller.");
1115 
1116 static bool alerts_broken;
1117 module_param(alerts_broken, bool, 0);
1118 MODULE_PARM_DESC(alerts_broken, "Don't enable alerts for the controller.");
1119 
1120 /*
1121  * Bit 0 enables message debugging, bit 1 enables state debugging, and
1122  * bit 2 enables timing debugging.  This is an array indexed by
1123  * interface number"
1124  */
1125 static int dbg[MAX_SSIF_BMCS];
1126 static int num_dbg;
1127 module_param_array(dbg, int, &num_dbg, 0);
1128 MODULE_PARM_DESC(dbg, "Turn on debugging.");
1129 
1130 static bool ssif_dbg_probe;
1131 module_param_named(dbg_probe, ssif_dbg_probe, bool, 0);
1132 MODULE_PARM_DESC(dbg_probe, "Enable debugging of probing of adapters.");
1133 
1134 static bool ssif_tryacpi = true;
1135 module_param_named(tryacpi, ssif_tryacpi, bool, 0);
1136 MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the default scan of the interfaces identified via ACPI");
1137 
1138 static bool ssif_trydmi = true;
1139 module_param_named(trydmi, ssif_trydmi, bool, 0);
1140 MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the default scan of the interfaces identified via DMI (SMBIOS)");
1141 
1142 static DEFINE_MUTEX(ssif_infos_mutex);
1143 static LIST_HEAD(ssif_infos);
1144 
1145 #define IPMI_SSIF_ATTR(name) \
1146 static ssize_t ipmi_##name##_show(struct device *dev,			\
1147 				  struct device_attribute *attr,	\
1148 				  char *buf)				\
1149 {									\
1150 	struct ssif_info *ssif_info = dev_get_drvdata(dev);		\
1151 									\
1152 	return snprintf(buf, 10, "%u\n", ssif_get_stat(ssif_info, name));\
1153 }									\
1154 static DEVICE_ATTR(name, S_IRUGO, ipmi_##name##_show, NULL)
1155 
1156 static ssize_t ipmi_type_show(struct device *dev,
1157 			      struct device_attribute *attr,
1158 			      char *buf)
1159 {
1160 	return snprintf(buf, 10, "ssif\n");
1161 }
1162 static DEVICE_ATTR(type, S_IRUGO, ipmi_type_show, NULL);
1163 
1164 IPMI_SSIF_ATTR(sent_messages);
1165 IPMI_SSIF_ATTR(sent_messages_parts);
1166 IPMI_SSIF_ATTR(send_retries);
1167 IPMI_SSIF_ATTR(send_errors);
1168 IPMI_SSIF_ATTR(received_messages);
1169 IPMI_SSIF_ATTR(received_message_parts);
1170 IPMI_SSIF_ATTR(receive_retries);
1171 IPMI_SSIF_ATTR(receive_errors);
1172 IPMI_SSIF_ATTR(flag_fetches);
1173 IPMI_SSIF_ATTR(hosed);
1174 IPMI_SSIF_ATTR(events);
1175 IPMI_SSIF_ATTR(watchdog_pretimeouts);
1176 IPMI_SSIF_ATTR(alerts);
1177 
1178 static struct attribute *ipmi_ssif_dev_attrs[] = {
1179 	&dev_attr_type.attr,
1180 	&dev_attr_sent_messages.attr,
1181 	&dev_attr_sent_messages_parts.attr,
1182 	&dev_attr_send_retries.attr,
1183 	&dev_attr_send_errors.attr,
1184 	&dev_attr_received_messages.attr,
1185 	&dev_attr_received_message_parts.attr,
1186 	&dev_attr_receive_retries.attr,
1187 	&dev_attr_receive_errors.attr,
1188 	&dev_attr_flag_fetches.attr,
1189 	&dev_attr_hosed.attr,
1190 	&dev_attr_events.attr,
1191 	&dev_attr_watchdog_pretimeouts.attr,
1192 	&dev_attr_alerts.attr,
1193 	NULL
1194 };
1195 
1196 static const struct attribute_group ipmi_ssif_dev_attr_group = {
1197 	.attrs		= ipmi_ssif_dev_attrs,
1198 };
1199 
1200 static void shutdown_ssif(void *send_info)
1201 {
1202 	struct ssif_info *ssif_info = send_info;
1203 
1204 	device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group);
1205 	dev_set_drvdata(&ssif_info->client->dev, NULL);
1206 
1207 	/* make sure the driver is not looking for flags any more. */
1208 	while (ssif_info->ssif_state != SSIF_NORMAL)
1209 		schedule_timeout(1);
1210 
1211 	ssif_info->stopping = true;
1212 	del_timer_sync(&ssif_info->retry_timer);
1213 	if (ssif_info->thread) {
1214 		complete(&ssif_info->wake_thread);
1215 		kthread_stop(ssif_info->thread);
1216 	}
1217 
1218 	/*
1219 	 * No message can be outstanding now, we have removed the
1220 	 * upper layer and it permitted us to do so.
1221 	 */
1222 	kfree(ssif_info);
1223 }
1224 
1225 static int ssif_remove(struct i2c_client *client)
1226 {
1227 	struct ssif_info *ssif_info = i2c_get_clientdata(client);
1228 	struct ipmi_smi *intf;
1229 	struct ssif_addr_info *addr_info;
1230 
1231 	if (!ssif_info)
1232 		return 0;
1233 
1234 	/*
1235 	 * After this point, we won't deliver anything asychronously
1236 	 * to the message handler.  We can unregister ourself.
1237 	 */
1238 	intf = ssif_info->intf;
1239 	ssif_info->intf = NULL;
1240 	ipmi_unregister_smi(intf);
1241 
1242 	list_for_each_entry(addr_info, &ssif_infos, link) {
1243 		if (addr_info->client == client) {
1244 			addr_info->client = NULL;
1245 			break;
1246 		}
1247 	}
1248 
1249 	return 0;
1250 }
1251 
1252 static int do_cmd(struct i2c_client *client, int len, unsigned char *msg,
1253 		  int *resp_len, unsigned char *resp)
1254 {
1255 	int retry_cnt;
1256 	int ret;
1257 
1258 	retry_cnt = SSIF_SEND_RETRIES;
1259  retry1:
1260 	ret = i2c_smbus_write_block_data(client, SSIF_IPMI_REQUEST, len, msg);
1261 	if (ret) {
1262 		retry_cnt--;
1263 		if (retry_cnt > 0)
1264 			goto retry1;
1265 		return -ENODEV;
1266 	}
1267 
1268 	ret = -ENODEV;
1269 	retry_cnt = SSIF_RECV_RETRIES;
1270 	while (retry_cnt > 0) {
1271 		ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE,
1272 						resp);
1273 		if (ret > 0)
1274 			break;
1275 		msleep(SSIF_MSG_MSEC);
1276 		retry_cnt--;
1277 		if (retry_cnt <= 0)
1278 			break;
1279 	}
1280 
1281 	if (ret > 0) {
1282 		/* Validate that the response is correct. */
1283 		if (ret < 3 ||
1284 		    (resp[0] != (msg[0] | (1 << 2))) ||
1285 		    (resp[1] != msg[1]))
1286 			ret = -EINVAL;
1287 		else {
1288 			*resp_len = ret;
1289 			ret = 0;
1290 		}
1291 	}
1292 
1293 	return ret;
1294 }
1295 
1296 static int ssif_detect(struct i2c_client *client, struct i2c_board_info *info)
1297 {
1298 	unsigned char *resp;
1299 	unsigned char msg[3];
1300 	int           rv;
1301 	int           len;
1302 
1303 	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
1304 	if (!resp)
1305 		return -ENOMEM;
1306 
1307 	/* Do a Get Device ID command, since it is required. */
1308 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1309 	msg[1] = IPMI_GET_DEVICE_ID_CMD;
1310 	rv = do_cmd(client, 2, msg, &len, resp);
1311 	if (rv)
1312 		rv = -ENODEV;
1313 	else
1314 		strlcpy(info->type, DEVICE_NAME, I2C_NAME_SIZE);
1315 	kfree(resp);
1316 	return rv;
1317 }
1318 
1319 static int strcmp_nospace(char *s1, char *s2)
1320 {
1321 	while (*s1 && *s2) {
1322 		while (isspace(*s1))
1323 			s1++;
1324 		while (isspace(*s2))
1325 			s2++;
1326 		if (*s1 > *s2)
1327 			return 1;
1328 		if (*s1 < *s2)
1329 			return -1;
1330 		s1++;
1331 		s2++;
1332 	}
1333 	return 0;
1334 }
1335 
1336 static struct ssif_addr_info *ssif_info_find(unsigned short addr,
1337 					     char *adapter_name,
1338 					     bool match_null_name)
1339 {
1340 	struct ssif_addr_info *info, *found = NULL;
1341 
1342 restart:
1343 	list_for_each_entry(info, &ssif_infos, link) {
1344 		if (info->binfo.addr == addr) {
1345 			if (info->adapter_name || adapter_name) {
1346 				if (!info->adapter_name != !adapter_name) {
1347 					/* One is NULL and one is not */
1348 					continue;
1349 				}
1350 				if (adapter_name &&
1351 				    strcmp_nospace(info->adapter_name,
1352 						   adapter_name))
1353 					/* Names do not match */
1354 					continue;
1355 			}
1356 			found = info;
1357 			break;
1358 		}
1359 	}
1360 
1361 	if (!found && match_null_name) {
1362 		/* Try to get an exact match first, then try with a NULL name */
1363 		adapter_name = NULL;
1364 		match_null_name = false;
1365 		goto restart;
1366 	}
1367 
1368 	return found;
1369 }
1370 
1371 static bool check_acpi(struct ssif_info *ssif_info, struct device *dev)
1372 {
1373 #ifdef CONFIG_ACPI
1374 	acpi_handle acpi_handle;
1375 
1376 	acpi_handle = ACPI_HANDLE(dev);
1377 	if (acpi_handle) {
1378 		ssif_info->addr_source = SI_ACPI;
1379 		ssif_info->addr_info.acpi_info.acpi_handle = acpi_handle;
1380 		return true;
1381 	}
1382 #endif
1383 	return false;
1384 }
1385 
1386 static int find_slave_address(struct i2c_client *client, int slave_addr)
1387 {
1388 #ifdef CONFIG_IPMI_DMI_DECODE
1389 	if (!slave_addr)
1390 		slave_addr = ipmi_dmi_get_slave_addr(
1391 			SI_TYPE_INVALID,
1392 			i2c_adapter_id(client->adapter),
1393 			client->addr);
1394 #endif
1395 
1396 	return slave_addr;
1397 }
1398 
1399 /*
1400  * Global enables we care about.
1401  */
1402 #define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \
1403 			     IPMI_BMC_EVT_MSG_INTR)
1404 
1405 static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
1406 {
1407 	unsigned char     msg[3];
1408 	unsigned char     *resp;
1409 	struct ssif_info   *ssif_info;
1410 	int               rv = 0;
1411 	int               len;
1412 	int               i;
1413 	u8		  slave_addr = 0;
1414 	struct ssif_addr_info *addr_info = NULL;
1415 
1416 	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
1417 	if (!resp)
1418 		return -ENOMEM;
1419 
1420 	ssif_info = kzalloc(sizeof(*ssif_info), GFP_KERNEL);
1421 	if (!ssif_info) {
1422 		kfree(resp);
1423 		return -ENOMEM;
1424 	}
1425 
1426 	if (!check_acpi(ssif_info, &client->dev)) {
1427 		addr_info = ssif_info_find(client->addr, client->adapter->name,
1428 					   true);
1429 		if (!addr_info) {
1430 			/* Must have come in through sysfs. */
1431 			ssif_info->addr_source = SI_HOTMOD;
1432 		} else {
1433 			ssif_info->addr_source = addr_info->addr_src;
1434 			ssif_info->ssif_debug = addr_info->debug;
1435 			ssif_info->addr_info = addr_info->addr_info;
1436 			addr_info->client = client;
1437 			slave_addr = addr_info->slave_addr;
1438 		}
1439 	}
1440 
1441 	slave_addr = find_slave_address(client, slave_addr);
1442 
1443 	pr_info(PFX "Trying %s-specified SSIF interface at i2c address 0x%x, adapter %s, slave address 0x%x\n",
1444 	       ipmi_addr_src_to_str(ssif_info->addr_source),
1445 	       client->addr, client->adapter->name, slave_addr);
1446 
1447 	ssif_info->client = client;
1448 	i2c_set_clientdata(client, ssif_info);
1449 
1450 	/* Now check for system interface capabilities */
1451 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1452 	msg[1] = IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD;
1453 	msg[2] = 0; /* SSIF */
1454 	rv = do_cmd(client, 3, msg, &len, resp);
1455 	if (!rv && (len >= 3) && (resp[2] == 0)) {
1456 		if (len < 7) {
1457 			if (ssif_dbg_probe)
1458 				pr_info(PFX "SSIF info too short: %d\n", len);
1459 			goto no_support;
1460 		}
1461 
1462 		/* Got a good SSIF response, handle it. */
1463 		ssif_info->max_xmit_msg_size = resp[5];
1464 		ssif_info->max_recv_msg_size = resp[6];
1465 		ssif_info->multi_support = (resp[4] >> 6) & 0x3;
1466 		ssif_info->supports_pec = (resp[4] >> 3) & 0x1;
1467 
1468 		/* Sanitize the data */
1469 		switch (ssif_info->multi_support) {
1470 		case SSIF_NO_MULTI:
1471 			if (ssif_info->max_xmit_msg_size > 32)
1472 				ssif_info->max_xmit_msg_size = 32;
1473 			if (ssif_info->max_recv_msg_size > 32)
1474 				ssif_info->max_recv_msg_size = 32;
1475 			break;
1476 
1477 		case SSIF_MULTI_2_PART:
1478 			if (ssif_info->max_xmit_msg_size > 63)
1479 				ssif_info->max_xmit_msg_size = 63;
1480 			if (ssif_info->max_recv_msg_size > 62)
1481 				ssif_info->max_recv_msg_size = 62;
1482 			break;
1483 
1484 		case SSIF_MULTI_n_PART:
1485 			/*
1486 			 * The specification is rather confusing at
1487 			 * this point, but I think I understand what
1488 			 * is meant.  At least I have a workable
1489 			 * solution.  With multi-part messages, you
1490 			 * cannot send a message that is a multiple of
1491 			 * 32-bytes in length, because the start and
1492 			 * middle messages are 32-bytes and the end
1493 			 * message must be at least one byte.  You
1494 			 * can't fudge on an extra byte, that would
1495 			 * screw up things like fru data writes.  So
1496 			 * we limit the length to 63 bytes.  That way
1497 			 * a 32-byte message gets sent as a single
1498 			 * part.  A larger message will be a 32-byte
1499 			 * start and the next message is always going
1500 			 * to be 1-31 bytes in length.  Not ideal, but
1501 			 * it should work.
1502 			 */
1503 			if (ssif_info->max_xmit_msg_size > 63)
1504 				ssif_info->max_xmit_msg_size = 63;
1505 			break;
1506 
1507 		default:
1508 			/* Data is not sane, just give up. */
1509 			goto no_support;
1510 		}
1511 	} else {
1512  no_support:
1513 		/* Assume no multi-part or PEC support */
1514 		pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
1515 		       rv, len, resp[2]);
1516 
1517 		ssif_info->max_xmit_msg_size = 32;
1518 		ssif_info->max_recv_msg_size = 32;
1519 		ssif_info->multi_support = SSIF_NO_MULTI;
1520 		ssif_info->supports_pec = 0;
1521 	}
1522 
1523 	/* Make sure the NMI timeout is cleared. */
1524 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1525 	msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
1526 	msg[2] = WDT_PRE_TIMEOUT_INT;
1527 	rv = do_cmd(client, 3, msg, &len, resp);
1528 	if (rv || (len < 3) || (resp[2] != 0))
1529 		pr_warn(PFX "Unable to clear message flags: %d %d %2.2x\n",
1530 			rv, len, resp[2]);
1531 
1532 	/* Attempt to enable the event buffer. */
1533 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1534 	msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
1535 	rv = do_cmd(client, 2, msg, &len, resp);
1536 	if (rv || (len < 4) || (resp[2] != 0)) {
1537 		pr_warn(PFX "Error getting global enables: %d %d %2.2x\n",
1538 			rv, len, resp[2]);
1539 		rv = 0; /* Not fatal */
1540 		goto found;
1541 	}
1542 
1543 	ssif_info->global_enables = resp[3];
1544 
1545 	if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) {
1546 		ssif_info->has_event_buffer = true;
1547 		/* buffer is already enabled, nothing to do. */
1548 		goto found;
1549 	}
1550 
1551 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1552 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
1553 	msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF;
1554 	rv = do_cmd(client, 3, msg, &len, resp);
1555 	if (rv || (len < 2)) {
1556 		pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
1557 			rv, len, resp[2]);
1558 		rv = 0; /* Not fatal */
1559 		goto found;
1560 	}
1561 
1562 	if (resp[2] == 0) {
1563 		/* A successful return means the event buffer is supported. */
1564 		ssif_info->has_event_buffer = true;
1565 		ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF;
1566 	}
1567 
1568 	/* Some systems don't behave well if you enable alerts. */
1569 	if (alerts_broken)
1570 		goto found;
1571 
1572 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1573 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
1574 	msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR;
1575 	rv = do_cmd(client, 3, msg, &len, resp);
1576 	if (rv || (len < 2)) {
1577 		pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
1578 			rv, len, resp[2]);
1579 		rv = 0; /* Not fatal */
1580 		goto found;
1581 	}
1582 
1583 	if (resp[2] == 0) {
1584 		/* A successful return means the alert is supported. */
1585 		ssif_info->supports_alert = true;
1586 		ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR;
1587 	}
1588 
1589  found:
1590 	if (ssif_dbg_probe) {
1591 		pr_info("ssif_probe: i2c_probe found device at i2c address %x\n",
1592 			client->addr);
1593 	}
1594 
1595 	spin_lock_init(&ssif_info->lock);
1596 	ssif_info->ssif_state = SSIF_NORMAL;
1597 	timer_setup(&ssif_info->retry_timer, retry_timeout, 0);
1598 
1599 	for (i = 0; i < SSIF_NUM_STATS; i++)
1600 		atomic_set(&ssif_info->stats[i], 0);
1601 
1602 	if (ssif_info->supports_pec)
1603 		ssif_info->client->flags |= I2C_CLIENT_PEC;
1604 
1605 	ssif_info->handlers.owner = THIS_MODULE;
1606 	ssif_info->handlers.start_processing = ssif_start_processing;
1607 	ssif_info->handlers.shutdown = shutdown_ssif;
1608 	ssif_info->handlers.get_smi_info = get_smi_info;
1609 	ssif_info->handlers.sender = sender;
1610 	ssif_info->handlers.request_events = request_events;
1611 
1612 	{
1613 		unsigned int thread_num;
1614 
1615 		thread_num = ((i2c_adapter_id(ssif_info->client->adapter)
1616 			       << 8) |
1617 			      ssif_info->client->addr);
1618 		init_completion(&ssif_info->wake_thread);
1619 		ssif_info->thread = kthread_run(ipmi_ssif_thread, ssif_info,
1620 					       "kssif%4.4x", thread_num);
1621 		if (IS_ERR(ssif_info->thread)) {
1622 			rv = PTR_ERR(ssif_info->thread);
1623 			dev_notice(&ssif_info->client->dev,
1624 				   "Could not start kernel thread: error %d\n",
1625 				   rv);
1626 			goto out;
1627 		}
1628 	}
1629 
1630 	dev_set_drvdata(&ssif_info->client->dev, ssif_info);
1631 	rv = device_add_group(&ssif_info->client->dev,
1632 			      &ipmi_ssif_dev_attr_group);
1633 	if (rv) {
1634 		dev_err(&ssif_info->client->dev,
1635 			"Unable to add device attributes: error %d\n",
1636 			rv);
1637 		goto out;
1638 	}
1639 
1640 	rv = ipmi_register_smi(&ssif_info->handlers,
1641 			       ssif_info,
1642 			       &ssif_info->client->dev,
1643 			       slave_addr);
1644 	 if (rv) {
1645 		pr_err(PFX "Unable to register device: error %d\n", rv);
1646 		goto out_remove_attr;
1647 	}
1648 
1649  out:
1650 	if (rv) {
1651 		/*
1652 		 * Note that if addr_info->client is assigned, we
1653 		 * leave it.  The i2c client hangs around even if we
1654 		 * return a failure here, and the failure here is not
1655 		 * propagated back to the i2c code.  This seems to be
1656 		 * design intent, strange as it may be.  But if we
1657 		 * don't leave it, ssif_platform_remove will not remove
1658 		 * the client like it should.
1659 		 */
1660 		dev_err(&client->dev, "Unable to start IPMI SSIF: %d\n", rv);
1661 		kfree(ssif_info);
1662 	}
1663 	kfree(resp);
1664 	return rv;
1665 
1666 out_remove_attr:
1667 	device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group);
1668 	dev_set_drvdata(&ssif_info->client->dev, NULL);
1669 	goto out;
1670 }
1671 
1672 static int ssif_adapter_handler(struct device *adev, void *opaque)
1673 {
1674 	struct ssif_addr_info *addr_info = opaque;
1675 
1676 	if (adev->type != &i2c_adapter_type)
1677 		return 0;
1678 
1679 	i2c_new_device(to_i2c_adapter(adev), &addr_info->binfo);
1680 
1681 	if (!addr_info->adapter_name)
1682 		return 1; /* Only try the first I2C adapter by default. */
1683 	return 0;
1684 }
1685 
1686 static int new_ssif_client(int addr, char *adapter_name,
1687 			   int debug, int slave_addr,
1688 			   enum ipmi_addr_src addr_src,
1689 			   struct device *dev)
1690 {
1691 	struct ssif_addr_info *addr_info;
1692 	int rv = 0;
1693 
1694 	mutex_lock(&ssif_infos_mutex);
1695 	if (ssif_info_find(addr, adapter_name, false)) {
1696 		rv = -EEXIST;
1697 		goto out_unlock;
1698 	}
1699 
1700 	addr_info = kzalloc(sizeof(*addr_info), GFP_KERNEL);
1701 	if (!addr_info) {
1702 		rv = -ENOMEM;
1703 		goto out_unlock;
1704 	}
1705 
1706 	if (adapter_name) {
1707 		addr_info->adapter_name = kstrdup(adapter_name, GFP_KERNEL);
1708 		if (!addr_info->adapter_name) {
1709 			kfree(addr_info);
1710 			rv = -ENOMEM;
1711 			goto out_unlock;
1712 		}
1713 	}
1714 
1715 	strncpy(addr_info->binfo.type, DEVICE_NAME,
1716 		sizeof(addr_info->binfo.type));
1717 	addr_info->binfo.addr = addr;
1718 	addr_info->binfo.platform_data = addr_info;
1719 	addr_info->debug = debug;
1720 	addr_info->slave_addr = slave_addr;
1721 	addr_info->addr_src = addr_src;
1722 	addr_info->dev = dev;
1723 
1724 	if (dev)
1725 		dev_set_drvdata(dev, addr_info);
1726 
1727 	list_add_tail(&addr_info->link, &ssif_infos);
1728 
1729 	if (initialized)
1730 		i2c_for_each_dev(addr_info, ssif_adapter_handler);
1731 	/* Otherwise address list will get it */
1732 
1733 out_unlock:
1734 	mutex_unlock(&ssif_infos_mutex);
1735 	return rv;
1736 }
1737 
1738 static void free_ssif_clients(void)
1739 {
1740 	struct ssif_addr_info *info, *tmp;
1741 
1742 	mutex_lock(&ssif_infos_mutex);
1743 	list_for_each_entry_safe(info, tmp, &ssif_infos, link) {
1744 		list_del(&info->link);
1745 		kfree(info->adapter_name);
1746 		kfree(info);
1747 	}
1748 	mutex_unlock(&ssif_infos_mutex);
1749 }
1750 
1751 static unsigned short *ssif_address_list(void)
1752 {
1753 	struct ssif_addr_info *info;
1754 	unsigned int count = 0, i;
1755 	unsigned short *address_list;
1756 
1757 	list_for_each_entry(info, &ssif_infos, link)
1758 		count++;
1759 
1760 	address_list = kcalloc(count + 1, sizeof(*address_list),
1761 			       GFP_KERNEL);
1762 	if (!address_list)
1763 		return NULL;
1764 
1765 	i = 0;
1766 	list_for_each_entry(info, &ssif_infos, link) {
1767 		unsigned short addr = info->binfo.addr;
1768 		int j;
1769 
1770 		for (j = 0; j < i; j++) {
1771 			if (address_list[j] == addr)
1772 				goto skip_addr;
1773 		}
1774 		address_list[i] = addr;
1775 skip_addr:
1776 		i++;
1777 	}
1778 	address_list[i] = I2C_CLIENT_END;
1779 
1780 	return address_list;
1781 }
1782 
1783 #ifdef CONFIG_ACPI
1784 static const struct acpi_device_id ssif_acpi_match[] = {
1785 	{ "IPI0001", 0 },
1786 	{ },
1787 };
1788 MODULE_DEVICE_TABLE(acpi, ssif_acpi_match);
1789 #endif
1790 
1791 #ifdef CONFIG_DMI
1792 static int dmi_ipmi_probe(struct platform_device *pdev)
1793 {
1794 	u8 slave_addr = 0;
1795 	u16 i2c_addr;
1796 	int rv;
1797 
1798 	if (!ssif_trydmi)
1799 		return -ENODEV;
1800 
1801 	rv = device_property_read_u16(&pdev->dev, "i2c-addr", &i2c_addr);
1802 	if (rv) {
1803 		dev_warn(&pdev->dev, PFX "No i2c-addr property\n");
1804 		return -ENODEV;
1805 	}
1806 
1807 	rv = device_property_read_u8(&pdev->dev, "slave-addr", &slave_addr);
1808 	if (rv)
1809 		dev_warn(&pdev->dev, "device has no slave-addr property");
1810 
1811 	return new_ssif_client(i2c_addr, NULL, 0,
1812 			       slave_addr, SI_SMBIOS, &pdev->dev);
1813 }
1814 #else
1815 static int dmi_ipmi_probe(struct platform_device *pdev)
1816 {
1817 	return -ENODEV;
1818 }
1819 #endif
1820 
1821 static const struct i2c_device_id ssif_id[] = {
1822 	{ DEVICE_NAME, 0 },
1823 	{ }
1824 };
1825 MODULE_DEVICE_TABLE(i2c, ssif_id);
1826 
1827 static struct i2c_driver ssif_i2c_driver = {
1828 	.class		= I2C_CLASS_HWMON,
1829 	.driver		= {
1830 		.name			= DEVICE_NAME
1831 	},
1832 	.probe		= ssif_probe,
1833 	.remove		= ssif_remove,
1834 	.alert		= ssif_alert,
1835 	.id_table	= ssif_id,
1836 	.detect		= ssif_detect
1837 };
1838 
1839 static int ssif_platform_probe(struct platform_device *dev)
1840 {
1841 	return dmi_ipmi_probe(dev);
1842 }
1843 
1844 static int ssif_platform_remove(struct platform_device *dev)
1845 {
1846 	struct ssif_addr_info *addr_info = dev_get_drvdata(&dev->dev);
1847 
1848 	if (!addr_info)
1849 		return 0;
1850 
1851 	mutex_lock(&ssif_infos_mutex);
1852 	i2c_unregister_device(addr_info->client);
1853 
1854 	list_del(&addr_info->link);
1855 	kfree(addr_info);
1856 	mutex_unlock(&ssif_infos_mutex);
1857 	return 0;
1858 }
1859 
1860 static struct platform_driver ipmi_driver = {
1861 	.driver = {
1862 		.name = DEVICE_NAME,
1863 	},
1864 	.probe		= ssif_platform_probe,
1865 	.remove		= ssif_platform_remove,
1866 };
1867 
1868 static int init_ipmi_ssif(void)
1869 {
1870 	int i;
1871 	int rv;
1872 
1873 	if (initialized)
1874 		return 0;
1875 
1876 	pr_info("IPMI SSIF Interface driver\n");
1877 
1878 	/* build list for i2c from addr list */
1879 	for (i = 0; i < num_addrs; i++) {
1880 		rv = new_ssif_client(addr[i], adapter_name[i],
1881 				     dbg[i], slave_addrs[i],
1882 				     SI_HARDCODED, NULL);
1883 		if (rv)
1884 			pr_err(PFX
1885 			       "Couldn't add hardcoded device at addr 0x%x\n",
1886 			       addr[i]);
1887 	}
1888 
1889 	if (ssif_tryacpi)
1890 		ssif_i2c_driver.driver.acpi_match_table	=
1891 			ACPI_PTR(ssif_acpi_match);
1892 
1893 	if (ssif_trydmi) {
1894 		rv = platform_driver_register(&ipmi_driver);
1895 		if (rv)
1896 			pr_err(PFX "Unable to register driver: %d\n", rv);
1897 	}
1898 
1899 	ssif_i2c_driver.address_list = ssif_address_list();
1900 
1901 	rv = i2c_add_driver(&ssif_i2c_driver);
1902 	if (!rv)
1903 		initialized = true;
1904 
1905 	return rv;
1906 }
1907 module_init(init_ipmi_ssif);
1908 
1909 static void cleanup_ipmi_ssif(void)
1910 {
1911 	if (!initialized)
1912 		return;
1913 
1914 	initialized = false;
1915 
1916 	i2c_del_driver(&ssif_i2c_driver);
1917 
1918 	platform_driver_unregister(&ipmi_driver);
1919 
1920 	free_ssif_clients();
1921 }
1922 module_exit(cleanup_ipmi_ssif);
1923 
1924 MODULE_ALIAS("platform:dmi-ipmi-ssif");
1925 MODULE_AUTHOR("Todd C Davis <todd.c.davis@intel.com>, Corey Minyard <minyard@acm.org>");
1926 MODULE_DESCRIPTION("IPMI driver for management controllers on a SMBus");
1927 MODULE_LICENSE("GPL");
1928