xref: /openbmc/linux/drivers/char/ipmi/ipmi_ssif.c (revision b8c5a806)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * ipmi_ssif.c
4  *
5  * The interface to the IPMI driver for SMBus access to a SMBus
6  * compliant device.  Called SSIF by the IPMI spec.
7  *
8  * Author: Intel Corporation
9  *         Todd Davis <todd.c.davis@intel.com>
10  *
11  * Rewritten by Corey Minyard <minyard@acm.org> to support the
12  * non-blocking I2C interface, add support for multi-part
13  * transactions, add PEC support, and general clenaup.
14  *
15  * Copyright 2003 Intel Corporation
16  * Copyright 2005 MontaVista Software
17  */
18 
19 /*
20  * This file holds the "policy" for the interface to the SSIF state
21  * machine.  It does the configuration, handles timers and interrupts,
22  * and drives the real SSIF state machine.
23  */
24 
25 /*
26  * TODO: Figure out how to use SMB alerts.  This will require a new
27  * interface into the I2C driver, I believe.
28  */
29 
30 #define pr_fmt(fmt) "ipmi_ssif: " fmt
31 #define dev_fmt(fmt) "ipmi_ssif: " fmt
32 
33 #if defined(MODVERSIONS)
34 #include <linux/modversions.h>
35 #endif
36 
37 #include <linux/module.h>
38 #include <linux/moduleparam.h>
39 #include <linux/sched.h>
40 #include <linux/seq_file.h>
41 #include <linux/timer.h>
42 #include <linux/delay.h>
43 #include <linux/errno.h>
44 #include <linux/spinlock.h>
45 #include <linux/slab.h>
46 #include <linux/list.h>
47 #include <linux/i2c.h>
48 #include <linux/ipmi_smi.h>
49 #include <linux/init.h>
50 #include <linux/dmi.h>
51 #include <linux/kthread.h>
52 #include <linux/acpi.h>
53 #include <linux/ctype.h>
54 #include <linux/time64.h>
55 #include "ipmi_dmi.h"
56 
57 #define DEVICE_NAME "ipmi_ssif"
58 
59 #define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD	0x57
60 
61 #define	SSIF_IPMI_REQUEST			2
62 #define	SSIF_IPMI_MULTI_PART_REQUEST_START	6
63 #define	SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE	7
64 #define	SSIF_IPMI_MULTI_PART_REQUEST_END	8
65 #define	SSIF_IPMI_RESPONSE			3
66 #define	SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE	9
67 
68 /* ssif_debug is a bit-field
69  *	SSIF_DEBUG_MSG -	commands and their responses
70  *	SSIF_DEBUG_STATES -	message states
71  *	SSIF_DEBUG_TIMING -	 Measure times between events in the driver
72  */
73 #define SSIF_DEBUG_TIMING	4
74 #define SSIF_DEBUG_STATE	2
75 #define SSIF_DEBUG_MSG		1
76 #define SSIF_NODEBUG		0
77 #define SSIF_DEFAULT_DEBUG	(SSIF_NODEBUG)
78 
79 /*
80  * Timer values
81  */
82 #define SSIF_MSG_USEC		20000	/* 20ms between message tries. */
83 #define SSIF_MSG_PART_USEC	5000	/* 5ms for a message part */
84 
85 /* How many times to we retry sending/receiving the message. */
86 #define	SSIF_SEND_RETRIES	5
87 #define	SSIF_RECV_RETRIES	250
88 
89 #define SSIF_MSG_MSEC		(SSIF_MSG_USEC / 1000)
90 #define SSIF_MSG_JIFFIES	((SSIF_MSG_USEC * 1000) / TICK_NSEC)
91 #define SSIF_MSG_PART_JIFFIES	((SSIF_MSG_PART_USEC * 1000) / TICK_NSEC)
92 
93 /*
94  * Timeout for the watch, only used for get flag timer.
95  */
96 #define SSIF_WATCH_MSG_TIMEOUT		msecs_to_jiffies(10)
97 #define SSIF_WATCH_WATCHDOG_TIMEOUT	msecs_to_jiffies(250)
98 
99 enum ssif_intf_state {
100 	SSIF_NORMAL,
101 	SSIF_GETTING_FLAGS,
102 	SSIF_GETTING_EVENTS,
103 	SSIF_CLEARING_FLAGS,
104 	SSIF_GETTING_MESSAGES,
105 	/* FIXME - add watchdog stuff. */
106 };
107 
108 #define SSIF_IDLE(ssif)	 ((ssif)->ssif_state == SSIF_NORMAL \
109 			  && (ssif)->curr_msg == NULL)
110 
111 /*
112  * Indexes into stats[] in ssif_info below.
113  */
114 enum ssif_stat_indexes {
115 	/* Number of total messages sent. */
116 	SSIF_STAT_sent_messages = 0,
117 
118 	/*
119 	 * Number of message parts sent.  Messages may be broken into
120 	 * parts if they are long.
121 	 */
122 	SSIF_STAT_sent_messages_parts,
123 
124 	/*
125 	 * Number of time a message was retried.
126 	 */
127 	SSIF_STAT_send_retries,
128 
129 	/*
130 	 * Number of times the send of a message failed.
131 	 */
132 	SSIF_STAT_send_errors,
133 
134 	/*
135 	 * Number of message responses received.
136 	 */
137 	SSIF_STAT_received_messages,
138 
139 	/*
140 	 * Number of message fragments received.
141 	 */
142 	SSIF_STAT_received_message_parts,
143 
144 	/*
145 	 * Number of times the receive of a message was retried.
146 	 */
147 	SSIF_STAT_receive_retries,
148 
149 	/*
150 	 * Number of errors receiving messages.
151 	 */
152 	SSIF_STAT_receive_errors,
153 
154 	/*
155 	 * Number of times a flag fetch was requested.
156 	 */
157 	SSIF_STAT_flag_fetches,
158 
159 	/*
160 	 * Number of times the hardware didn't follow the state machine.
161 	 */
162 	SSIF_STAT_hosed,
163 
164 	/*
165 	 * Number of received events.
166 	 */
167 	SSIF_STAT_events,
168 
169 	/* Number of asyncronous messages received. */
170 	SSIF_STAT_incoming_messages,
171 
172 	/* Number of watchdog pretimeouts. */
173 	SSIF_STAT_watchdog_pretimeouts,
174 
175 	/* Number of alers received. */
176 	SSIF_STAT_alerts,
177 
178 	/* Always add statistics before this value, it must be last. */
179 	SSIF_NUM_STATS
180 };
181 
182 struct ssif_addr_info {
183 	struct i2c_board_info binfo;
184 	char *adapter_name;
185 	int debug;
186 	int slave_addr;
187 	enum ipmi_addr_src addr_src;
188 	union ipmi_smi_info_union addr_info;
189 	struct device *dev;
190 	struct i2c_client *client;
191 
192 	struct i2c_client *added_client;
193 
194 	struct mutex clients_mutex;
195 	struct list_head clients;
196 
197 	struct list_head link;
198 };
199 
200 struct ssif_info;
201 
202 typedef void (*ssif_i2c_done)(struct ssif_info *ssif_info, int result,
203 			     unsigned char *data, unsigned int len);
204 
205 struct ssif_info {
206 	struct ipmi_smi     *intf;
207 	spinlock_t	    lock;
208 	struct ipmi_smi_msg *waiting_msg;
209 	struct ipmi_smi_msg *curr_msg;
210 	enum ssif_intf_state ssif_state;
211 	unsigned long       ssif_debug;
212 
213 	struct ipmi_smi_handlers handlers;
214 
215 	enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */
216 	union ipmi_smi_info_union addr_info;
217 
218 	/*
219 	 * Flags from the last GET_MSG_FLAGS command, used when an ATTN
220 	 * is set to hold the flags until we are done handling everything
221 	 * from the flags.
222 	 */
223 #define RECEIVE_MSG_AVAIL	0x01
224 #define EVENT_MSG_BUFFER_FULL	0x02
225 #define WDT_PRE_TIMEOUT_INT	0x08
226 	unsigned char       msg_flags;
227 
228 	u8		    global_enables;
229 	bool		    has_event_buffer;
230 	bool		    supports_alert;
231 
232 	/*
233 	 * Used to tell what we should do with alerts.  If we are
234 	 * waiting on a response, read the data immediately.
235 	 */
236 	bool		    got_alert;
237 	bool		    waiting_alert;
238 
239 	/*
240 	 * If set to true, this will request events the next time the
241 	 * state machine is idle.
242 	 */
243 	bool                req_events;
244 
245 	/*
246 	 * If set to true, this will request flags the next time the
247 	 * state machine is idle.
248 	 */
249 	bool                req_flags;
250 
251 	/*
252 	 * Used to perform timer operations when run-to-completion
253 	 * mode is on.  This is a countdown timer.
254 	 */
255 	int                 rtc_us_timer;
256 
257 	/* Used for sending/receiving data.  +1 for the length. */
258 	unsigned char data[IPMI_MAX_MSG_LENGTH + 1];
259 	unsigned int  data_len;
260 
261 	/* Temp receive buffer, gets copied into data. */
262 	unsigned char recv[I2C_SMBUS_BLOCK_MAX];
263 
264 	struct i2c_client *client;
265 	ssif_i2c_done done_handler;
266 
267 	/* Thread interface handling */
268 	struct task_struct *thread;
269 	struct completion wake_thread;
270 	bool stopping;
271 	int i2c_read_write;
272 	int i2c_command;
273 	unsigned char *i2c_data;
274 	unsigned int i2c_size;
275 
276 	struct timer_list retry_timer;
277 	int retries_left;
278 
279 	long watch_timeout;		/* Timeout for flags check, 0 if off. */
280 	struct timer_list watch_timer;	/* Flag fetch timer. */
281 
282 	/* Info from SSIF cmd */
283 	unsigned char max_xmit_msg_size;
284 	unsigned char max_recv_msg_size;
285 	bool cmd8_works; /* See test_multipart_messages() for details. */
286 	unsigned int  multi_support;
287 	int           supports_pec;
288 
289 #define SSIF_NO_MULTI		0
290 #define SSIF_MULTI_2_PART	1
291 #define SSIF_MULTI_n_PART	2
292 	unsigned char *multi_data;
293 	unsigned int  multi_len;
294 	unsigned int  multi_pos;
295 
296 	atomic_t stats[SSIF_NUM_STATS];
297 };
298 
299 #define ssif_inc_stat(ssif, stat) \
300 	atomic_inc(&(ssif)->stats[SSIF_STAT_ ## stat])
301 #define ssif_get_stat(ssif, stat) \
302 	((unsigned int) atomic_read(&(ssif)->stats[SSIF_STAT_ ## stat]))
303 
304 static bool initialized;
305 static bool platform_registered;
306 
307 static void return_hosed_msg(struct ssif_info *ssif_info,
308 			     struct ipmi_smi_msg *msg);
309 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags);
310 static int start_send(struct ssif_info *ssif_info,
311 		      unsigned char   *data,
312 		      unsigned int    len);
313 
314 static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info,
315 					  unsigned long *flags)
316 	__acquires(&ssif_info->lock)
317 {
318 	spin_lock_irqsave(&ssif_info->lock, *flags);
319 	return flags;
320 }
321 
322 static void ipmi_ssif_unlock_cond(struct ssif_info *ssif_info,
323 				  unsigned long *flags)
324 	__releases(&ssif_info->lock)
325 {
326 	spin_unlock_irqrestore(&ssif_info->lock, *flags);
327 }
328 
329 static void deliver_recv_msg(struct ssif_info *ssif_info,
330 			     struct ipmi_smi_msg *msg)
331 {
332 	if (msg->rsp_size < 0) {
333 		return_hosed_msg(ssif_info, msg);
334 		dev_err(&ssif_info->client->dev,
335 			"%s: Malformed message: rsp_size = %d\n",
336 		       __func__, msg->rsp_size);
337 	} else {
338 		ipmi_smi_msg_received(ssif_info->intf, msg);
339 	}
340 }
341 
342 static void return_hosed_msg(struct ssif_info *ssif_info,
343 			     struct ipmi_smi_msg *msg)
344 {
345 	ssif_inc_stat(ssif_info, hosed);
346 
347 	/* Make it a response */
348 	msg->rsp[0] = msg->data[0] | 4;
349 	msg->rsp[1] = msg->data[1];
350 	msg->rsp[2] = 0xFF; /* Unknown error. */
351 	msg->rsp_size = 3;
352 
353 	deliver_recv_msg(ssif_info, msg);
354 }
355 
356 /*
357  * Must be called with the message lock held.  This will release the
358  * message lock.  Note that the caller will check SSIF_IDLE and start a
359  * new operation, so there is no need to check for new messages to
360  * start in here.
361  */
362 static void start_clear_flags(struct ssif_info *ssif_info, unsigned long *flags)
363 {
364 	unsigned char msg[3];
365 
366 	ssif_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
367 	ssif_info->ssif_state = SSIF_CLEARING_FLAGS;
368 	ipmi_ssif_unlock_cond(ssif_info, flags);
369 
370 	/* Make sure the watchdog pre-timeout flag is not set at startup. */
371 	msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
372 	msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
373 	msg[2] = WDT_PRE_TIMEOUT_INT;
374 
375 	if (start_send(ssif_info, msg, 3) != 0) {
376 		/* Error, just go to normal state. */
377 		ssif_info->ssif_state = SSIF_NORMAL;
378 	}
379 }
380 
381 static void start_flag_fetch(struct ssif_info *ssif_info, unsigned long *flags)
382 {
383 	unsigned char mb[2];
384 
385 	ssif_info->req_flags = false;
386 	ssif_info->ssif_state = SSIF_GETTING_FLAGS;
387 	ipmi_ssif_unlock_cond(ssif_info, flags);
388 
389 	mb[0] = (IPMI_NETFN_APP_REQUEST << 2);
390 	mb[1] = IPMI_GET_MSG_FLAGS_CMD;
391 	if (start_send(ssif_info, mb, 2) != 0)
392 		ssif_info->ssif_state = SSIF_NORMAL;
393 }
394 
395 static void check_start_send(struct ssif_info *ssif_info, unsigned long *flags,
396 			     struct ipmi_smi_msg *msg)
397 {
398 	if (start_send(ssif_info, msg->data, msg->data_size) != 0) {
399 		unsigned long oflags;
400 
401 		flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
402 		ssif_info->curr_msg = NULL;
403 		ssif_info->ssif_state = SSIF_NORMAL;
404 		ipmi_ssif_unlock_cond(ssif_info, flags);
405 		ipmi_free_smi_msg(msg);
406 	}
407 }
408 
409 static void start_event_fetch(struct ssif_info *ssif_info, unsigned long *flags)
410 {
411 	struct ipmi_smi_msg *msg;
412 
413 	ssif_info->req_events = false;
414 
415 	msg = ipmi_alloc_smi_msg();
416 	if (!msg) {
417 		ssif_info->ssif_state = SSIF_NORMAL;
418 		ipmi_ssif_unlock_cond(ssif_info, flags);
419 		return;
420 	}
421 
422 	ssif_info->curr_msg = msg;
423 	ssif_info->ssif_state = SSIF_GETTING_EVENTS;
424 	ipmi_ssif_unlock_cond(ssif_info, flags);
425 
426 	msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
427 	msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
428 	msg->data_size = 2;
429 
430 	check_start_send(ssif_info, flags, msg);
431 }
432 
433 static void start_recv_msg_fetch(struct ssif_info *ssif_info,
434 				 unsigned long *flags)
435 {
436 	struct ipmi_smi_msg *msg;
437 
438 	msg = ipmi_alloc_smi_msg();
439 	if (!msg) {
440 		ssif_info->ssif_state = SSIF_NORMAL;
441 		ipmi_ssif_unlock_cond(ssif_info, flags);
442 		return;
443 	}
444 
445 	ssif_info->curr_msg = msg;
446 	ssif_info->ssif_state = SSIF_GETTING_MESSAGES;
447 	ipmi_ssif_unlock_cond(ssif_info, flags);
448 
449 	msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
450 	msg->data[1] = IPMI_GET_MSG_CMD;
451 	msg->data_size = 2;
452 
453 	check_start_send(ssif_info, flags, msg);
454 }
455 
456 /*
457  * Must be called with the message lock held.  This will release the
458  * message lock.  Note that the caller will check SSIF_IDLE and start a
459  * new operation, so there is no need to check for new messages to
460  * start in here.
461  */
462 static void handle_flags(struct ssif_info *ssif_info, unsigned long *flags)
463 {
464 	if (ssif_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
465 		/* Watchdog pre-timeout */
466 		ssif_inc_stat(ssif_info, watchdog_pretimeouts);
467 		start_clear_flags(ssif_info, flags);
468 		ipmi_smi_watchdog_pretimeout(ssif_info->intf);
469 	} else if (ssif_info->msg_flags & RECEIVE_MSG_AVAIL)
470 		/* Messages available. */
471 		start_recv_msg_fetch(ssif_info, flags);
472 	else if (ssif_info->msg_flags & EVENT_MSG_BUFFER_FULL)
473 		/* Events available. */
474 		start_event_fetch(ssif_info, flags);
475 	else {
476 		ssif_info->ssif_state = SSIF_NORMAL;
477 		ipmi_ssif_unlock_cond(ssif_info, flags);
478 	}
479 }
480 
481 static int ipmi_ssif_thread(void *data)
482 {
483 	struct ssif_info *ssif_info = data;
484 
485 	while (!kthread_should_stop()) {
486 		int result;
487 
488 		/* Wait for something to do */
489 		result = wait_for_completion_interruptible(
490 						&ssif_info->wake_thread);
491 		if (ssif_info->stopping)
492 			break;
493 		if (result == -ERESTARTSYS)
494 			continue;
495 		init_completion(&ssif_info->wake_thread);
496 
497 		if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) {
498 			result = i2c_smbus_write_block_data(
499 				ssif_info->client, ssif_info->i2c_command,
500 				ssif_info->i2c_data[0],
501 				ssif_info->i2c_data + 1);
502 			ssif_info->done_handler(ssif_info, result, NULL, 0);
503 		} else {
504 			result = i2c_smbus_read_block_data(
505 				ssif_info->client, ssif_info->i2c_command,
506 				ssif_info->i2c_data);
507 			if (result < 0)
508 				ssif_info->done_handler(ssif_info, result,
509 							NULL, 0);
510 			else
511 				ssif_info->done_handler(ssif_info, 0,
512 							ssif_info->i2c_data,
513 							result);
514 		}
515 	}
516 
517 	return 0;
518 }
519 
520 static int ssif_i2c_send(struct ssif_info *ssif_info,
521 			ssif_i2c_done handler,
522 			int read_write, int command,
523 			unsigned char *data, unsigned int size)
524 {
525 	ssif_info->done_handler = handler;
526 
527 	ssif_info->i2c_read_write = read_write;
528 	ssif_info->i2c_command = command;
529 	ssif_info->i2c_data = data;
530 	ssif_info->i2c_size = size;
531 	complete(&ssif_info->wake_thread);
532 	return 0;
533 }
534 
535 
536 static void msg_done_handler(struct ssif_info *ssif_info, int result,
537 			     unsigned char *data, unsigned int len);
538 
539 static void start_get(struct ssif_info *ssif_info)
540 {
541 	int rv;
542 
543 	ssif_info->rtc_us_timer = 0;
544 	ssif_info->multi_pos = 0;
545 
546 	rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
547 			  SSIF_IPMI_RESPONSE,
548 			  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
549 	if (rv < 0) {
550 		/* request failed, just return the error. */
551 		if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
552 			dev_dbg(&ssif_info->client->dev,
553 				"Error from i2c_non_blocking_op(5)\n");
554 
555 		msg_done_handler(ssif_info, -EIO, NULL, 0);
556 	}
557 }
558 
559 static void retry_timeout(struct timer_list *t)
560 {
561 	struct ssif_info *ssif_info = from_timer(ssif_info, t, retry_timer);
562 	unsigned long oflags, *flags;
563 	bool waiting;
564 
565 	if (ssif_info->stopping)
566 		return;
567 
568 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
569 	waiting = ssif_info->waiting_alert;
570 	ssif_info->waiting_alert = false;
571 	ipmi_ssif_unlock_cond(ssif_info, flags);
572 
573 	if (waiting)
574 		start_get(ssif_info);
575 }
576 
577 static void watch_timeout(struct timer_list *t)
578 {
579 	struct ssif_info *ssif_info = from_timer(ssif_info, t, watch_timer);
580 	unsigned long oflags, *flags;
581 
582 	if (ssif_info->stopping)
583 		return;
584 
585 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
586 	if (ssif_info->watch_timeout) {
587 		mod_timer(&ssif_info->watch_timer,
588 			  jiffies + ssif_info->watch_timeout);
589 		if (SSIF_IDLE(ssif_info)) {
590 			start_flag_fetch(ssif_info, flags); /* Releases lock */
591 			return;
592 		}
593 		ssif_info->req_flags = true;
594 	}
595 	ipmi_ssif_unlock_cond(ssif_info, flags);
596 }
597 
598 static void ssif_alert(struct i2c_client *client, enum i2c_alert_protocol type,
599 		       unsigned int data)
600 {
601 	struct ssif_info *ssif_info = i2c_get_clientdata(client);
602 	unsigned long oflags, *flags;
603 	bool do_get = false;
604 
605 	if (type != I2C_PROTOCOL_SMBUS_ALERT)
606 		return;
607 
608 	ssif_inc_stat(ssif_info, alerts);
609 
610 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
611 	if (ssif_info->waiting_alert) {
612 		ssif_info->waiting_alert = false;
613 		del_timer(&ssif_info->retry_timer);
614 		do_get = true;
615 	} else if (ssif_info->curr_msg) {
616 		ssif_info->got_alert = true;
617 	}
618 	ipmi_ssif_unlock_cond(ssif_info, flags);
619 	if (do_get)
620 		start_get(ssif_info);
621 }
622 
623 static int start_resend(struct ssif_info *ssif_info);
624 
625 static void msg_done_handler(struct ssif_info *ssif_info, int result,
626 			     unsigned char *data, unsigned int len)
627 {
628 	struct ipmi_smi_msg *msg;
629 	unsigned long oflags, *flags;
630 	int rv;
631 
632 	/*
633 	 * We are single-threaded here, so no need for a lock until we
634 	 * start messing with driver states or the queues.
635 	 */
636 
637 	if (result < 0) {
638 		ssif_info->retries_left--;
639 		if (ssif_info->retries_left > 0) {
640 			ssif_inc_stat(ssif_info, receive_retries);
641 
642 			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
643 			ssif_info->waiting_alert = true;
644 			ssif_info->rtc_us_timer = SSIF_MSG_USEC;
645 			if (!ssif_info->stopping)
646 				mod_timer(&ssif_info->retry_timer,
647 					  jiffies + SSIF_MSG_JIFFIES);
648 			ipmi_ssif_unlock_cond(ssif_info, flags);
649 			return;
650 		}
651 
652 		ssif_inc_stat(ssif_info, receive_errors);
653 
654 		if  (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
655 			dev_dbg(&ssif_info->client->dev,
656 				"%s: Error %d\n", __func__, result);
657 		len = 0;
658 		goto continue_op;
659 	}
660 
661 	if ((len > 1) && (ssif_info->multi_pos == 0)
662 				&& (data[0] == 0x00) && (data[1] == 0x01)) {
663 		/* Start of multi-part read.  Start the next transaction. */
664 		int i;
665 
666 		ssif_inc_stat(ssif_info, received_message_parts);
667 
668 		/* Remove the multi-part read marker. */
669 		len -= 2;
670 		data += 2;
671 		for (i = 0; i < len; i++)
672 			ssif_info->data[i] = data[i];
673 		ssif_info->multi_len = len;
674 		ssif_info->multi_pos = 1;
675 
676 		rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
677 				  SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
678 				  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
679 		if (rv < 0) {
680 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
681 				dev_dbg(&ssif_info->client->dev,
682 					"Error from i2c_non_blocking_op(1)\n");
683 
684 			result = -EIO;
685 		} else
686 			return;
687 	} else if (ssif_info->multi_pos) {
688 		/* Middle of multi-part read.  Start the next transaction. */
689 		int i;
690 		unsigned char blocknum;
691 
692 		if (len == 0) {
693 			result = -EIO;
694 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
695 				dev_dbg(&ssif_info->client->dev,
696 					"Middle message with no data\n");
697 
698 			goto continue_op;
699 		}
700 
701 		blocknum = data[0];
702 		len--;
703 		data++;
704 
705 		if (blocknum != 0xff && len != 31) {
706 		    /* All blocks but the last must have 31 data bytes. */
707 			result = -EIO;
708 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
709 				dev_dbg(&ssif_info->client->dev,
710 					"Received middle message <31\n");
711 
712 			goto continue_op;
713 		}
714 
715 		if (ssif_info->multi_len + len > IPMI_MAX_MSG_LENGTH) {
716 			/* Received message too big, abort the operation. */
717 			result = -E2BIG;
718 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
719 				dev_dbg(&ssif_info->client->dev,
720 					"Received message too big\n");
721 
722 			goto continue_op;
723 		}
724 
725 		for (i = 0; i < len; i++)
726 			ssif_info->data[i + ssif_info->multi_len] = data[i];
727 		ssif_info->multi_len += len;
728 		if (blocknum == 0xff) {
729 			/* End of read */
730 			len = ssif_info->multi_len;
731 			data = ssif_info->data;
732 		} else if (blocknum + 1 != ssif_info->multi_pos) {
733 			/*
734 			 * Out of sequence block, just abort.  Block
735 			 * numbers start at zero for the second block,
736 			 * but multi_pos starts at one, so the +1.
737 			 */
738 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
739 				dev_dbg(&ssif_info->client->dev,
740 					"Received message out of sequence, expected %u, got %u\n",
741 					ssif_info->multi_pos - 1, blocknum);
742 			result = -EIO;
743 		} else {
744 			ssif_inc_stat(ssif_info, received_message_parts);
745 
746 			ssif_info->multi_pos++;
747 
748 			rv = ssif_i2c_send(ssif_info, msg_done_handler,
749 					   I2C_SMBUS_READ,
750 					   SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
751 					   ssif_info->recv,
752 					   I2C_SMBUS_BLOCK_DATA);
753 			if (rv < 0) {
754 				if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
755 					dev_dbg(&ssif_info->client->dev,
756 						"Error from ssif_i2c_send\n");
757 
758 				result = -EIO;
759 			} else
760 				return;
761 		}
762 	}
763 
764  continue_op:
765 	if (result < 0) {
766 		ssif_inc_stat(ssif_info, receive_errors);
767 	} else {
768 		ssif_inc_stat(ssif_info, received_messages);
769 		ssif_inc_stat(ssif_info, received_message_parts);
770 	}
771 
772 	if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
773 		dev_dbg(&ssif_info->client->dev,
774 			"DONE 1: state = %d, result=%d\n",
775 			ssif_info->ssif_state, result);
776 
777 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
778 	msg = ssif_info->curr_msg;
779 	if (msg) {
780 		if (data) {
781 			if (len > IPMI_MAX_MSG_LENGTH)
782 				len = IPMI_MAX_MSG_LENGTH;
783 			memcpy(msg->rsp, data, len);
784 		} else {
785 			len = 0;
786 		}
787 		msg->rsp_size = len;
788 		ssif_info->curr_msg = NULL;
789 	}
790 
791 	switch (ssif_info->ssif_state) {
792 	case SSIF_NORMAL:
793 		ipmi_ssif_unlock_cond(ssif_info, flags);
794 		if (!msg)
795 			break;
796 
797 		if (result < 0)
798 			return_hosed_msg(ssif_info, msg);
799 		else
800 			deliver_recv_msg(ssif_info, msg);
801 		break;
802 
803 	case SSIF_GETTING_FLAGS:
804 		/* We got the flags from the SSIF, now handle them. */
805 		if ((result < 0) || (len < 4) || (data[2] != 0)) {
806 			/*
807 			 * Error fetching flags, or invalid length,
808 			 * just give up for now.
809 			 */
810 			ssif_info->ssif_state = SSIF_NORMAL;
811 			ipmi_ssif_unlock_cond(ssif_info, flags);
812 			dev_warn(&ssif_info->client->dev,
813 				 "Error getting flags: %d %d, %x\n",
814 				 result, len, (len >= 3) ? data[2] : 0);
815 		} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
816 			   || data[1] != IPMI_GET_MSG_FLAGS_CMD) {
817 			/*
818 			 * Don't abort here, maybe it was a queued
819 			 * response to a previous command.
820 			 */
821 			ipmi_ssif_unlock_cond(ssif_info, flags);
822 			dev_warn(&ssif_info->client->dev,
823 				 "Invalid response getting flags: %x %x\n",
824 				 data[0], data[1]);
825 		} else {
826 			ssif_inc_stat(ssif_info, flag_fetches);
827 			ssif_info->msg_flags = data[3];
828 			handle_flags(ssif_info, flags);
829 		}
830 		break;
831 
832 	case SSIF_CLEARING_FLAGS:
833 		/* We cleared the flags. */
834 		if ((result < 0) || (len < 3) || (data[2] != 0)) {
835 			/* Error clearing flags */
836 			dev_warn(&ssif_info->client->dev,
837 				 "Error clearing flags: %d %d, %x\n",
838 				 result, len, (len >= 3) ? data[2] : 0);
839 		} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
840 			   || data[1] != IPMI_CLEAR_MSG_FLAGS_CMD) {
841 			dev_warn(&ssif_info->client->dev,
842 				 "Invalid response clearing flags: %x %x\n",
843 				 data[0], data[1]);
844 		}
845 		ssif_info->ssif_state = SSIF_NORMAL;
846 		ipmi_ssif_unlock_cond(ssif_info, flags);
847 		break;
848 
849 	case SSIF_GETTING_EVENTS:
850 		if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
851 			/* Error getting event, probably done. */
852 			msg->done(msg);
853 
854 			/* Take off the event flag. */
855 			ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
856 			handle_flags(ssif_info, flags);
857 		} else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
858 			   || msg->rsp[1] != IPMI_READ_EVENT_MSG_BUFFER_CMD) {
859 			dev_warn(&ssif_info->client->dev,
860 				 "Invalid response getting events: %x %x\n",
861 				 msg->rsp[0], msg->rsp[1]);
862 			msg->done(msg);
863 			/* Take off the event flag. */
864 			ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
865 			handle_flags(ssif_info, flags);
866 		} else {
867 			handle_flags(ssif_info, flags);
868 			ssif_inc_stat(ssif_info, events);
869 			deliver_recv_msg(ssif_info, msg);
870 		}
871 		break;
872 
873 	case SSIF_GETTING_MESSAGES:
874 		if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
875 			/* Error getting event, probably done. */
876 			msg->done(msg);
877 
878 			/* Take off the msg flag. */
879 			ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
880 			handle_flags(ssif_info, flags);
881 		} else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
882 			   || msg->rsp[1] != IPMI_GET_MSG_CMD) {
883 			dev_warn(&ssif_info->client->dev,
884 				 "Invalid response clearing flags: %x %x\n",
885 				 msg->rsp[0], msg->rsp[1]);
886 			msg->done(msg);
887 
888 			/* Take off the msg flag. */
889 			ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
890 			handle_flags(ssif_info, flags);
891 		} else {
892 			ssif_inc_stat(ssif_info, incoming_messages);
893 			handle_flags(ssif_info, flags);
894 			deliver_recv_msg(ssif_info, msg);
895 		}
896 		break;
897 	}
898 
899 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
900 	if (SSIF_IDLE(ssif_info) && !ssif_info->stopping) {
901 		if (ssif_info->req_events)
902 			start_event_fetch(ssif_info, flags);
903 		else if (ssif_info->req_flags)
904 			start_flag_fetch(ssif_info, flags);
905 		else
906 			start_next_msg(ssif_info, flags);
907 	} else
908 		ipmi_ssif_unlock_cond(ssif_info, flags);
909 
910 	if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
911 		dev_dbg(&ssif_info->client->dev,
912 			"DONE 2: state = %d.\n", ssif_info->ssif_state);
913 }
914 
915 static void msg_written_handler(struct ssif_info *ssif_info, int result,
916 				unsigned char *data, unsigned int len)
917 {
918 	int rv;
919 
920 	/* We are single-threaded here, so no need for a lock. */
921 	if (result < 0) {
922 		ssif_info->retries_left--;
923 		if (ssif_info->retries_left > 0) {
924 			if (!start_resend(ssif_info)) {
925 				ssif_inc_stat(ssif_info, send_retries);
926 				return;
927 			}
928 			/* request failed, just return the error. */
929 			ssif_inc_stat(ssif_info, send_errors);
930 
931 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
932 				dev_dbg(&ssif_info->client->dev,
933 					"%s: Out of retries\n", __func__);
934 			msg_done_handler(ssif_info, -EIO, NULL, 0);
935 			return;
936 		}
937 
938 		ssif_inc_stat(ssif_info, send_errors);
939 
940 		/*
941 		 * Got an error on transmit, let the done routine
942 		 * handle it.
943 		 */
944 		if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
945 			dev_dbg(&ssif_info->client->dev,
946 				"%s: Error  %d\n", __func__, result);
947 
948 		msg_done_handler(ssif_info, result, NULL, 0);
949 		return;
950 	}
951 
952 	if (ssif_info->multi_data) {
953 		/*
954 		 * In the middle of a multi-data write.  See the comment
955 		 * in the SSIF_MULTI_n_PART case in the probe function
956 		 * for details on the intricacies of this.
957 		 */
958 		int left, to_write;
959 		unsigned char *data_to_send;
960 		unsigned char cmd;
961 
962 		ssif_inc_stat(ssif_info, sent_messages_parts);
963 
964 		left = ssif_info->multi_len - ssif_info->multi_pos;
965 		to_write = left;
966 		if (to_write > 32)
967 			to_write = 32;
968 		/* Length byte. */
969 		ssif_info->multi_data[ssif_info->multi_pos] = to_write;
970 		data_to_send = ssif_info->multi_data + ssif_info->multi_pos;
971 		ssif_info->multi_pos += to_write;
972 		cmd = SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE;
973 		if (ssif_info->cmd8_works) {
974 			if (left == to_write) {
975 				cmd = SSIF_IPMI_MULTI_PART_REQUEST_END;
976 				ssif_info->multi_data = NULL;
977 			}
978 		} else if (to_write < 32) {
979 			ssif_info->multi_data = NULL;
980 		}
981 
982 		rv = ssif_i2c_send(ssif_info, msg_written_handler,
983 				   I2C_SMBUS_WRITE, cmd,
984 				   data_to_send, I2C_SMBUS_BLOCK_DATA);
985 		if (rv < 0) {
986 			/* request failed, just return the error. */
987 			ssif_inc_stat(ssif_info, send_errors);
988 
989 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
990 				dev_dbg(&ssif_info->client->dev,
991 					"Error from i2c_non_blocking_op(3)\n");
992 			msg_done_handler(ssif_info, -EIO, NULL, 0);
993 		}
994 	} else {
995 		/* Ready to request the result. */
996 		unsigned long oflags, *flags;
997 
998 		ssif_inc_stat(ssif_info, sent_messages);
999 		ssif_inc_stat(ssif_info, sent_messages_parts);
1000 
1001 		flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1002 		if (ssif_info->got_alert) {
1003 			/* The result is already ready, just start it. */
1004 			ssif_info->got_alert = false;
1005 			ipmi_ssif_unlock_cond(ssif_info, flags);
1006 			start_get(ssif_info);
1007 		} else {
1008 			/* Wait a jiffie then request the next message */
1009 			ssif_info->waiting_alert = true;
1010 			ssif_info->retries_left = SSIF_RECV_RETRIES;
1011 			ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
1012 			if (!ssif_info->stopping)
1013 				mod_timer(&ssif_info->retry_timer,
1014 					  jiffies + SSIF_MSG_PART_JIFFIES);
1015 			ipmi_ssif_unlock_cond(ssif_info, flags);
1016 		}
1017 	}
1018 }
1019 
1020 static int start_resend(struct ssif_info *ssif_info)
1021 {
1022 	int rv;
1023 	int command;
1024 
1025 	ssif_info->got_alert = false;
1026 
1027 	if (ssif_info->data_len > 32) {
1028 		command = SSIF_IPMI_MULTI_PART_REQUEST_START;
1029 		ssif_info->multi_data = ssif_info->data;
1030 		ssif_info->multi_len = ssif_info->data_len;
1031 		/*
1032 		 * Subtle thing, this is 32, not 33, because we will
1033 		 * overwrite the thing at position 32 (which was just
1034 		 * transmitted) with the new length.
1035 		 */
1036 		ssif_info->multi_pos = 32;
1037 		ssif_info->data[0] = 32;
1038 	} else {
1039 		ssif_info->multi_data = NULL;
1040 		command = SSIF_IPMI_REQUEST;
1041 		ssif_info->data[0] = ssif_info->data_len;
1042 	}
1043 
1044 	rv = ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE,
1045 			  command, ssif_info->data, I2C_SMBUS_BLOCK_DATA);
1046 	if (rv && (ssif_info->ssif_debug & SSIF_DEBUG_MSG))
1047 		dev_dbg(&ssif_info->client->dev,
1048 			"Error from i2c_non_blocking_op(4)\n");
1049 	return rv;
1050 }
1051 
1052 static int start_send(struct ssif_info *ssif_info,
1053 		      unsigned char   *data,
1054 		      unsigned int    len)
1055 {
1056 	if (len > IPMI_MAX_MSG_LENGTH)
1057 		return -E2BIG;
1058 	if (len > ssif_info->max_xmit_msg_size)
1059 		return -E2BIG;
1060 
1061 	ssif_info->retries_left = SSIF_SEND_RETRIES;
1062 	memcpy(ssif_info->data + 1, data, len);
1063 	ssif_info->data_len = len;
1064 	return start_resend(ssif_info);
1065 }
1066 
1067 /* Must be called with the message lock held. */
1068 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags)
1069 {
1070 	struct ipmi_smi_msg *msg;
1071 	unsigned long oflags;
1072 
1073  restart:
1074 	if (!SSIF_IDLE(ssif_info)) {
1075 		ipmi_ssif_unlock_cond(ssif_info, flags);
1076 		return;
1077 	}
1078 
1079 	if (!ssif_info->waiting_msg) {
1080 		ssif_info->curr_msg = NULL;
1081 		ipmi_ssif_unlock_cond(ssif_info, flags);
1082 	} else {
1083 		int rv;
1084 
1085 		ssif_info->curr_msg = ssif_info->waiting_msg;
1086 		ssif_info->waiting_msg = NULL;
1087 		ipmi_ssif_unlock_cond(ssif_info, flags);
1088 		rv = start_send(ssif_info,
1089 				ssif_info->curr_msg->data,
1090 				ssif_info->curr_msg->data_size);
1091 		if (rv) {
1092 			msg = ssif_info->curr_msg;
1093 			ssif_info->curr_msg = NULL;
1094 			return_hosed_msg(ssif_info, msg);
1095 			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1096 			goto restart;
1097 		}
1098 	}
1099 }
1100 
1101 static void sender(void                *send_info,
1102 		   struct ipmi_smi_msg *msg)
1103 {
1104 	struct ssif_info *ssif_info = (struct ssif_info *) send_info;
1105 	unsigned long oflags, *flags;
1106 
1107 	BUG_ON(ssif_info->waiting_msg);
1108 	ssif_info->waiting_msg = msg;
1109 
1110 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1111 	start_next_msg(ssif_info, flags);
1112 
1113 	if (ssif_info->ssif_debug & SSIF_DEBUG_TIMING) {
1114 		struct timespec64 t;
1115 
1116 		ktime_get_real_ts64(&t);
1117 		dev_dbg(&ssif_info->client->dev,
1118 			"**Enqueue %02x %02x: %lld.%6.6ld\n",
1119 			msg->data[0], msg->data[1],
1120 			(long long)t.tv_sec, (long)t.tv_nsec / NSEC_PER_USEC);
1121 	}
1122 }
1123 
1124 static int get_smi_info(void *send_info, struct ipmi_smi_info *data)
1125 {
1126 	struct ssif_info *ssif_info = send_info;
1127 
1128 	data->addr_src = ssif_info->addr_source;
1129 	data->dev = &ssif_info->client->dev;
1130 	data->addr_info = ssif_info->addr_info;
1131 	get_device(data->dev);
1132 
1133 	return 0;
1134 }
1135 
1136 /*
1137  * Upper layer wants us to request events.
1138  */
1139 static void request_events(void *send_info)
1140 {
1141 	struct ssif_info *ssif_info = (struct ssif_info *) send_info;
1142 	unsigned long oflags, *flags;
1143 
1144 	if (!ssif_info->has_event_buffer)
1145 		return;
1146 
1147 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1148 	ssif_info->req_events = true;
1149 	ipmi_ssif_unlock_cond(ssif_info, flags);
1150 }
1151 
1152 /*
1153  * Upper layer is changing the flag saying whether we need to request
1154  * flags periodically or not.
1155  */
1156 static void ssif_set_need_watch(void *send_info, unsigned int watch_mask)
1157 {
1158 	struct ssif_info *ssif_info = (struct ssif_info *) send_info;
1159 	unsigned long oflags, *flags;
1160 	long timeout = 0;
1161 
1162 	if (watch_mask & IPMI_WATCH_MASK_CHECK_MESSAGES)
1163 		timeout = SSIF_WATCH_MSG_TIMEOUT;
1164 	else if (watch_mask)
1165 		timeout = SSIF_WATCH_WATCHDOG_TIMEOUT;
1166 
1167 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1168 	if (timeout != ssif_info->watch_timeout) {
1169 		ssif_info->watch_timeout = timeout;
1170 		if (ssif_info->watch_timeout)
1171 			mod_timer(&ssif_info->watch_timer,
1172 				  jiffies + ssif_info->watch_timeout);
1173 	}
1174 	ipmi_ssif_unlock_cond(ssif_info, flags);
1175 }
1176 
1177 static int ssif_start_processing(void            *send_info,
1178 				 struct ipmi_smi *intf)
1179 {
1180 	struct ssif_info *ssif_info = send_info;
1181 
1182 	ssif_info->intf = intf;
1183 
1184 	return 0;
1185 }
1186 
1187 #define MAX_SSIF_BMCS 4
1188 
1189 static unsigned short addr[MAX_SSIF_BMCS];
1190 static int num_addrs;
1191 module_param_array(addr, ushort, &num_addrs, 0);
1192 MODULE_PARM_DESC(addr, "The addresses to scan for IPMI BMCs on the SSIFs.");
1193 
1194 static char *adapter_name[MAX_SSIF_BMCS];
1195 static int num_adapter_names;
1196 module_param_array(adapter_name, charp, &num_adapter_names, 0);
1197 MODULE_PARM_DESC(adapter_name, "The string name of the I2C device that has the BMC.  By default all devices are scanned.");
1198 
1199 static int slave_addrs[MAX_SSIF_BMCS];
1200 static int num_slave_addrs;
1201 module_param_array(slave_addrs, int, &num_slave_addrs, 0);
1202 MODULE_PARM_DESC(slave_addrs,
1203 		 "The default IPMB slave address for the controller.");
1204 
1205 static bool alerts_broken;
1206 module_param(alerts_broken, bool, 0);
1207 MODULE_PARM_DESC(alerts_broken, "Don't enable alerts for the controller.");
1208 
1209 /*
1210  * Bit 0 enables message debugging, bit 1 enables state debugging, and
1211  * bit 2 enables timing debugging.  This is an array indexed by
1212  * interface number"
1213  */
1214 static int dbg[MAX_SSIF_BMCS];
1215 static int num_dbg;
1216 module_param_array(dbg, int, &num_dbg, 0);
1217 MODULE_PARM_DESC(dbg, "Turn on debugging.");
1218 
1219 static bool ssif_dbg_probe;
1220 module_param_named(dbg_probe, ssif_dbg_probe, bool, 0);
1221 MODULE_PARM_DESC(dbg_probe, "Enable debugging of probing of adapters.");
1222 
1223 static bool ssif_tryacpi = true;
1224 module_param_named(tryacpi, ssif_tryacpi, bool, 0);
1225 MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the default scan of the interfaces identified via ACPI");
1226 
1227 static bool ssif_trydmi = true;
1228 module_param_named(trydmi, ssif_trydmi, bool, 0);
1229 MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the default scan of the interfaces identified via DMI (SMBIOS)");
1230 
1231 static DEFINE_MUTEX(ssif_infos_mutex);
1232 static LIST_HEAD(ssif_infos);
1233 
1234 #define IPMI_SSIF_ATTR(name) \
1235 static ssize_t ipmi_##name##_show(struct device *dev,			\
1236 				  struct device_attribute *attr,	\
1237 				  char *buf)				\
1238 {									\
1239 	struct ssif_info *ssif_info = dev_get_drvdata(dev);		\
1240 									\
1241 	return snprintf(buf, 10, "%u\n", ssif_get_stat(ssif_info, name));\
1242 }									\
1243 static DEVICE_ATTR(name, S_IRUGO, ipmi_##name##_show, NULL)
1244 
1245 static ssize_t ipmi_type_show(struct device *dev,
1246 			      struct device_attribute *attr,
1247 			      char *buf)
1248 {
1249 	return snprintf(buf, 10, "ssif\n");
1250 }
1251 static DEVICE_ATTR(type, S_IRUGO, ipmi_type_show, NULL);
1252 
1253 IPMI_SSIF_ATTR(sent_messages);
1254 IPMI_SSIF_ATTR(sent_messages_parts);
1255 IPMI_SSIF_ATTR(send_retries);
1256 IPMI_SSIF_ATTR(send_errors);
1257 IPMI_SSIF_ATTR(received_messages);
1258 IPMI_SSIF_ATTR(received_message_parts);
1259 IPMI_SSIF_ATTR(receive_retries);
1260 IPMI_SSIF_ATTR(receive_errors);
1261 IPMI_SSIF_ATTR(flag_fetches);
1262 IPMI_SSIF_ATTR(hosed);
1263 IPMI_SSIF_ATTR(events);
1264 IPMI_SSIF_ATTR(watchdog_pretimeouts);
1265 IPMI_SSIF_ATTR(alerts);
1266 
1267 static struct attribute *ipmi_ssif_dev_attrs[] = {
1268 	&dev_attr_type.attr,
1269 	&dev_attr_sent_messages.attr,
1270 	&dev_attr_sent_messages_parts.attr,
1271 	&dev_attr_send_retries.attr,
1272 	&dev_attr_send_errors.attr,
1273 	&dev_attr_received_messages.attr,
1274 	&dev_attr_received_message_parts.attr,
1275 	&dev_attr_receive_retries.attr,
1276 	&dev_attr_receive_errors.attr,
1277 	&dev_attr_flag_fetches.attr,
1278 	&dev_attr_hosed.attr,
1279 	&dev_attr_events.attr,
1280 	&dev_attr_watchdog_pretimeouts.attr,
1281 	&dev_attr_alerts.attr,
1282 	NULL
1283 };
1284 
1285 static const struct attribute_group ipmi_ssif_dev_attr_group = {
1286 	.attrs		= ipmi_ssif_dev_attrs,
1287 };
1288 
1289 static void shutdown_ssif(void *send_info)
1290 {
1291 	struct ssif_info *ssif_info = send_info;
1292 
1293 	device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group);
1294 	dev_set_drvdata(&ssif_info->client->dev, NULL);
1295 
1296 	/* make sure the driver is not looking for flags any more. */
1297 	while (ssif_info->ssif_state != SSIF_NORMAL)
1298 		schedule_timeout(1);
1299 
1300 	ssif_info->stopping = true;
1301 	del_timer_sync(&ssif_info->watch_timer);
1302 	del_timer_sync(&ssif_info->retry_timer);
1303 	if (ssif_info->thread) {
1304 		complete(&ssif_info->wake_thread);
1305 		kthread_stop(ssif_info->thread);
1306 	}
1307 }
1308 
1309 static int ssif_remove(struct i2c_client *client)
1310 {
1311 	struct ssif_info *ssif_info = i2c_get_clientdata(client);
1312 	struct ssif_addr_info *addr_info;
1313 
1314 	if (!ssif_info)
1315 		return 0;
1316 
1317 	/*
1318 	 * After this point, we won't deliver anything asychronously
1319 	 * to the message handler.  We can unregister ourself.
1320 	 */
1321 	ipmi_unregister_smi(ssif_info->intf);
1322 
1323 	list_for_each_entry(addr_info, &ssif_infos, link) {
1324 		if (addr_info->client == client) {
1325 			addr_info->client = NULL;
1326 			break;
1327 		}
1328 	}
1329 
1330 	kfree(ssif_info);
1331 
1332 	return 0;
1333 }
1334 
1335 static int read_response(struct i2c_client *client, unsigned char *resp)
1336 {
1337 	int ret = -ENODEV, retry_cnt = SSIF_RECV_RETRIES;
1338 
1339 	while (retry_cnt > 0) {
1340 		ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE,
1341 						resp);
1342 		if (ret > 0)
1343 			break;
1344 		msleep(SSIF_MSG_MSEC);
1345 		retry_cnt--;
1346 		if (retry_cnt <= 0)
1347 			break;
1348 	}
1349 
1350 	return ret;
1351 }
1352 
1353 static int do_cmd(struct i2c_client *client, int len, unsigned char *msg,
1354 		  int *resp_len, unsigned char *resp)
1355 {
1356 	int retry_cnt;
1357 	int ret;
1358 
1359 	retry_cnt = SSIF_SEND_RETRIES;
1360  retry1:
1361 	ret = i2c_smbus_write_block_data(client, SSIF_IPMI_REQUEST, len, msg);
1362 	if (ret) {
1363 		retry_cnt--;
1364 		if (retry_cnt > 0)
1365 			goto retry1;
1366 		return -ENODEV;
1367 	}
1368 
1369 	ret = read_response(client, resp);
1370 	if (ret > 0) {
1371 		/* Validate that the response is correct. */
1372 		if (ret < 3 ||
1373 		    (resp[0] != (msg[0] | (1 << 2))) ||
1374 		    (resp[1] != msg[1]))
1375 			ret = -EINVAL;
1376 		else if (ret > IPMI_MAX_MSG_LENGTH) {
1377 			ret = -E2BIG;
1378 		} else {
1379 			*resp_len = ret;
1380 			ret = 0;
1381 		}
1382 	}
1383 
1384 	return ret;
1385 }
1386 
1387 static int ssif_detect(struct i2c_client *client, struct i2c_board_info *info)
1388 {
1389 	unsigned char *resp;
1390 	unsigned char msg[3];
1391 	int           rv;
1392 	int           len;
1393 
1394 	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
1395 	if (!resp)
1396 		return -ENOMEM;
1397 
1398 	/* Do a Get Device ID command, since it is required. */
1399 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1400 	msg[1] = IPMI_GET_DEVICE_ID_CMD;
1401 	rv = do_cmd(client, 2, msg, &len, resp);
1402 	if (rv)
1403 		rv = -ENODEV;
1404 	else
1405 		strlcpy(info->type, DEVICE_NAME, I2C_NAME_SIZE);
1406 	kfree(resp);
1407 	return rv;
1408 }
1409 
1410 static int strcmp_nospace(char *s1, char *s2)
1411 {
1412 	while (*s1 && *s2) {
1413 		while (isspace(*s1))
1414 			s1++;
1415 		while (isspace(*s2))
1416 			s2++;
1417 		if (*s1 > *s2)
1418 			return 1;
1419 		if (*s1 < *s2)
1420 			return -1;
1421 		s1++;
1422 		s2++;
1423 	}
1424 	return 0;
1425 }
1426 
1427 static struct ssif_addr_info *ssif_info_find(unsigned short addr,
1428 					     char *adapter_name,
1429 					     bool match_null_name)
1430 {
1431 	struct ssif_addr_info *info, *found = NULL;
1432 
1433 restart:
1434 	list_for_each_entry(info, &ssif_infos, link) {
1435 		if (info->binfo.addr == addr) {
1436 			if (info->addr_src == SI_SMBIOS)
1437 				info->adapter_name = kstrdup(adapter_name,
1438 							     GFP_KERNEL);
1439 
1440 			if (info->adapter_name || adapter_name) {
1441 				if (!info->adapter_name != !adapter_name) {
1442 					/* One is NULL and one is not */
1443 					continue;
1444 				}
1445 				if (adapter_name &&
1446 				    strcmp_nospace(info->adapter_name,
1447 						   adapter_name))
1448 					/* Names do not match */
1449 					continue;
1450 			}
1451 			found = info;
1452 			break;
1453 		}
1454 	}
1455 
1456 	if (!found && match_null_name) {
1457 		/* Try to get an exact match first, then try with a NULL name */
1458 		adapter_name = NULL;
1459 		match_null_name = false;
1460 		goto restart;
1461 	}
1462 
1463 	return found;
1464 }
1465 
1466 static bool check_acpi(struct ssif_info *ssif_info, struct device *dev)
1467 {
1468 #ifdef CONFIG_ACPI
1469 	acpi_handle acpi_handle;
1470 
1471 	acpi_handle = ACPI_HANDLE(dev);
1472 	if (acpi_handle) {
1473 		ssif_info->addr_source = SI_ACPI;
1474 		ssif_info->addr_info.acpi_info.acpi_handle = acpi_handle;
1475 		return true;
1476 	}
1477 #endif
1478 	return false;
1479 }
1480 
1481 static int find_slave_address(struct i2c_client *client, int slave_addr)
1482 {
1483 #ifdef CONFIG_IPMI_DMI_DECODE
1484 	if (!slave_addr)
1485 		slave_addr = ipmi_dmi_get_slave_addr(
1486 			SI_TYPE_INVALID,
1487 			i2c_adapter_id(client->adapter),
1488 			client->addr);
1489 #endif
1490 
1491 	return slave_addr;
1492 }
1493 
1494 static int start_multipart_test(struct i2c_client *client,
1495 				unsigned char *msg, bool do_middle)
1496 {
1497 	int retry_cnt = SSIF_SEND_RETRIES, ret;
1498 
1499 retry_write:
1500 	ret = i2c_smbus_write_block_data(client,
1501 					 SSIF_IPMI_MULTI_PART_REQUEST_START,
1502 					 32, msg);
1503 	if (ret) {
1504 		retry_cnt--;
1505 		if (retry_cnt > 0)
1506 			goto retry_write;
1507 		dev_err(&client->dev, "Could not write multi-part start, though the BMC said it could handle it.  Just limit sends to one part.\n");
1508 		return ret;
1509 	}
1510 
1511 	if (!do_middle)
1512 		return 0;
1513 
1514 	ret = i2c_smbus_write_block_data(client,
1515 					 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
1516 					 32, msg + 32);
1517 	if (ret) {
1518 		dev_err(&client->dev, "Could not write multi-part middle, though the BMC said it could handle it.  Just limit sends to one part.\n");
1519 		return ret;
1520 	}
1521 
1522 	return 0;
1523 }
1524 
1525 static void test_multipart_messages(struct i2c_client *client,
1526 				    struct ssif_info *ssif_info,
1527 				    unsigned char *resp)
1528 {
1529 	unsigned char msg[65];
1530 	int ret;
1531 	bool do_middle;
1532 
1533 	if (ssif_info->max_xmit_msg_size <= 32)
1534 		return;
1535 
1536 	do_middle = ssif_info->max_xmit_msg_size > 63;
1537 
1538 	memset(msg, 0, sizeof(msg));
1539 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1540 	msg[1] = IPMI_GET_DEVICE_ID_CMD;
1541 
1542 	/*
1543 	 * The specification is all messed up dealing with sending
1544 	 * multi-part messages.  Per what the specification says, it
1545 	 * is impossible to send a message that is a multiple of 32
1546 	 * bytes, except for 32 itself.  It talks about a "start"
1547 	 * transaction (cmd=6) that must be 32 bytes, "middle"
1548 	 * transaction (cmd=7) that must be 32 bytes, and an "end"
1549 	 * transaction.  The "end" transaction is shown as cmd=7 in
1550 	 * the text, but if that's the case there is no way to
1551 	 * differentiate between a middle and end part except the
1552 	 * length being less than 32.  But there is a table at the far
1553 	 * end of the section (that I had never noticed until someone
1554 	 * pointed it out to me) that mentions it as cmd=8.
1555 	 *
1556 	 * After some thought, I think the example is wrong and the
1557 	 * end transaction should be cmd=8.  But some systems don't
1558 	 * implement cmd=8, they use a zero-length end transaction,
1559 	 * even though that violates the SMBus specification.
1560 	 *
1561 	 * So, to work around this, this code tests if cmd=8 works.
1562 	 * If it does, then we use that.  If not, it tests zero-
1563 	 * byte end transactions.  If that works, good.  If not,
1564 	 * we only allow 63-byte transactions max.
1565 	 */
1566 
1567 	ret = start_multipart_test(client, msg, do_middle);
1568 	if (ret)
1569 		goto out_no_multi_part;
1570 
1571 	ret = i2c_smbus_write_block_data(client,
1572 					 SSIF_IPMI_MULTI_PART_REQUEST_END,
1573 					 1, msg + 64);
1574 
1575 	if (!ret)
1576 		ret = read_response(client, resp);
1577 
1578 	if (ret > 0) {
1579 		/* End transactions work, we are good. */
1580 		ssif_info->cmd8_works = true;
1581 		return;
1582 	}
1583 
1584 	ret = start_multipart_test(client, msg, do_middle);
1585 	if (ret) {
1586 		dev_err(&client->dev, "Second multipart test failed.\n");
1587 		goto out_no_multi_part;
1588 	}
1589 
1590 	ret = i2c_smbus_write_block_data(client,
1591 					 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
1592 					 0, msg + 64);
1593 	if (!ret)
1594 		ret = read_response(client, resp);
1595 	if (ret > 0)
1596 		/* Zero-size end parts work, use those. */
1597 		return;
1598 
1599 	/* Limit to 63 bytes and use a short middle command to mark the end. */
1600 	if (ssif_info->max_xmit_msg_size > 63)
1601 		ssif_info->max_xmit_msg_size = 63;
1602 	return;
1603 
1604 out_no_multi_part:
1605 	ssif_info->max_xmit_msg_size = 32;
1606 	return;
1607 }
1608 
1609 /*
1610  * Global enables we care about.
1611  */
1612 #define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \
1613 			     IPMI_BMC_EVT_MSG_INTR)
1614 
1615 static void ssif_remove_dup(struct i2c_client *client)
1616 {
1617 	struct ssif_info *ssif_info = i2c_get_clientdata(client);
1618 
1619 	ipmi_unregister_smi(ssif_info->intf);
1620 	kfree(ssif_info);
1621 }
1622 
1623 static int ssif_add_infos(struct i2c_client *client)
1624 {
1625 	struct ssif_addr_info *info;
1626 
1627 	info = kzalloc(sizeof(*info), GFP_KERNEL);
1628 	if (!info)
1629 		return -ENOMEM;
1630 	info->addr_src = SI_ACPI;
1631 	info->client = client;
1632 	info->adapter_name = kstrdup(client->adapter->name, GFP_KERNEL);
1633 	info->binfo.addr = client->addr;
1634 	list_add_tail(&info->link, &ssif_infos);
1635 	return 0;
1636 }
1637 
1638 /*
1639  * Prefer ACPI over SMBIOS, if both are available.
1640  * So if we get an ACPI interface and have already registered a SMBIOS
1641  * interface at the same address, remove the SMBIOS and add the ACPI one.
1642  */
1643 static int ssif_check_and_remove(struct i2c_client *client,
1644 			      struct ssif_info *ssif_info)
1645 {
1646 	struct ssif_addr_info *info;
1647 
1648 	list_for_each_entry(info, &ssif_infos, link) {
1649 		if (!info->client)
1650 			return 0;
1651 		if (!strcmp(info->adapter_name, client->adapter->name) &&
1652 		    info->binfo.addr == client->addr) {
1653 			if (info->addr_src == SI_ACPI)
1654 				return -EEXIST;
1655 
1656 			if (ssif_info->addr_source == SI_ACPI &&
1657 			    info->addr_src == SI_SMBIOS) {
1658 				dev_info(&client->dev,
1659 					 "Removing %s-specified SSIF interface in favor of ACPI\n",
1660 					 ipmi_addr_src_to_str(info->addr_src));
1661 				ssif_remove_dup(info->client);
1662 				return 0;
1663 			}
1664 		}
1665 	}
1666 	return 0;
1667 }
1668 
1669 static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
1670 {
1671 	unsigned char     msg[3];
1672 	unsigned char     *resp;
1673 	struct ssif_info   *ssif_info;
1674 	int               rv = 0;
1675 	int               len;
1676 	int               i;
1677 	u8		  slave_addr = 0;
1678 	struct ssif_addr_info *addr_info = NULL;
1679 
1680 	mutex_lock(&ssif_infos_mutex);
1681 	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
1682 	if (!resp) {
1683 		mutex_unlock(&ssif_infos_mutex);
1684 		return -ENOMEM;
1685 	}
1686 
1687 	ssif_info = kzalloc(sizeof(*ssif_info), GFP_KERNEL);
1688 	if (!ssif_info) {
1689 		kfree(resp);
1690 		mutex_unlock(&ssif_infos_mutex);
1691 		return -ENOMEM;
1692 	}
1693 
1694 	if (!check_acpi(ssif_info, &client->dev)) {
1695 		addr_info = ssif_info_find(client->addr, client->adapter->name,
1696 					   true);
1697 		if (!addr_info) {
1698 			/* Must have come in through sysfs. */
1699 			ssif_info->addr_source = SI_HOTMOD;
1700 		} else {
1701 			ssif_info->addr_source = addr_info->addr_src;
1702 			ssif_info->ssif_debug = addr_info->debug;
1703 			ssif_info->addr_info = addr_info->addr_info;
1704 			addr_info->client = client;
1705 			slave_addr = addr_info->slave_addr;
1706 		}
1707 	}
1708 
1709 	rv = ssif_check_and_remove(client, ssif_info);
1710 	/* If rv is 0 and addr source is not SI_ACPI, continue probing */
1711 	if (!rv && ssif_info->addr_source == SI_ACPI) {
1712 		rv = ssif_add_infos(client);
1713 		if (rv) {
1714 			dev_err(&client->dev, "Out of memory!, exiting ..\n");
1715 			goto out;
1716 		}
1717 	} else if (rv) {
1718 		dev_err(&client->dev, "Not probing, Interface already present\n");
1719 		goto out;
1720 	}
1721 
1722 	slave_addr = find_slave_address(client, slave_addr);
1723 
1724 	dev_info(&client->dev,
1725 		 "Trying %s-specified SSIF interface at i2c address 0x%x, adapter %s, slave address 0x%x\n",
1726 		ipmi_addr_src_to_str(ssif_info->addr_source),
1727 		client->addr, client->adapter->name, slave_addr);
1728 
1729 	ssif_info->client = client;
1730 	i2c_set_clientdata(client, ssif_info);
1731 
1732 	/* Now check for system interface capabilities */
1733 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1734 	msg[1] = IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD;
1735 	msg[2] = 0; /* SSIF */
1736 	rv = do_cmd(client, 3, msg, &len, resp);
1737 	if (!rv && (len >= 3) && (resp[2] == 0)) {
1738 		if (len < 7) {
1739 			if (ssif_dbg_probe)
1740 				dev_dbg(&ssif_info->client->dev,
1741 					"SSIF info too short: %d\n", len);
1742 			goto no_support;
1743 		}
1744 
1745 		/* Got a good SSIF response, handle it. */
1746 		ssif_info->max_xmit_msg_size = resp[5];
1747 		ssif_info->max_recv_msg_size = resp[6];
1748 		ssif_info->multi_support = (resp[4] >> 6) & 0x3;
1749 		ssif_info->supports_pec = (resp[4] >> 3) & 0x1;
1750 
1751 		/* Sanitize the data */
1752 		switch (ssif_info->multi_support) {
1753 		case SSIF_NO_MULTI:
1754 			if (ssif_info->max_xmit_msg_size > 32)
1755 				ssif_info->max_xmit_msg_size = 32;
1756 			if (ssif_info->max_recv_msg_size > 32)
1757 				ssif_info->max_recv_msg_size = 32;
1758 			break;
1759 
1760 		case SSIF_MULTI_2_PART:
1761 			if (ssif_info->max_xmit_msg_size > 63)
1762 				ssif_info->max_xmit_msg_size = 63;
1763 			if (ssif_info->max_recv_msg_size > 62)
1764 				ssif_info->max_recv_msg_size = 62;
1765 			break;
1766 
1767 		case SSIF_MULTI_n_PART:
1768 			/* We take whatever size given, but do some testing. */
1769 			break;
1770 
1771 		default:
1772 			/* Data is not sane, just give up. */
1773 			goto no_support;
1774 		}
1775 	} else {
1776  no_support:
1777 		/* Assume no multi-part or PEC support */
1778 		dev_info(&ssif_info->client->dev,
1779 			 "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
1780 			rv, len, resp[2]);
1781 
1782 		ssif_info->max_xmit_msg_size = 32;
1783 		ssif_info->max_recv_msg_size = 32;
1784 		ssif_info->multi_support = SSIF_NO_MULTI;
1785 		ssif_info->supports_pec = 0;
1786 	}
1787 
1788 	test_multipart_messages(client, ssif_info, resp);
1789 
1790 	/* Make sure the NMI timeout is cleared. */
1791 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1792 	msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
1793 	msg[2] = WDT_PRE_TIMEOUT_INT;
1794 	rv = do_cmd(client, 3, msg, &len, resp);
1795 	if (rv || (len < 3) || (resp[2] != 0))
1796 		dev_warn(&ssif_info->client->dev,
1797 			 "Unable to clear message flags: %d %d %2.2x\n",
1798 			 rv, len, resp[2]);
1799 
1800 	/* Attempt to enable the event buffer. */
1801 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1802 	msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
1803 	rv = do_cmd(client, 2, msg, &len, resp);
1804 	if (rv || (len < 4) || (resp[2] != 0)) {
1805 		dev_warn(&ssif_info->client->dev,
1806 			 "Error getting global enables: %d %d %2.2x\n",
1807 			 rv, len, resp[2]);
1808 		rv = 0; /* Not fatal */
1809 		goto found;
1810 	}
1811 
1812 	ssif_info->global_enables = resp[3];
1813 
1814 	if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) {
1815 		ssif_info->has_event_buffer = true;
1816 		/* buffer is already enabled, nothing to do. */
1817 		goto found;
1818 	}
1819 
1820 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1821 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
1822 	msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF;
1823 	rv = do_cmd(client, 3, msg, &len, resp);
1824 	if (rv || (len < 2)) {
1825 		dev_warn(&ssif_info->client->dev,
1826 			 "Error setting global enables: %d %d %2.2x\n",
1827 			 rv, len, resp[2]);
1828 		rv = 0; /* Not fatal */
1829 		goto found;
1830 	}
1831 
1832 	if (resp[2] == 0) {
1833 		/* A successful return means the event buffer is supported. */
1834 		ssif_info->has_event_buffer = true;
1835 		ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF;
1836 	}
1837 
1838 	/* Some systems don't behave well if you enable alerts. */
1839 	if (alerts_broken)
1840 		goto found;
1841 
1842 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1843 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
1844 	msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR;
1845 	rv = do_cmd(client, 3, msg, &len, resp);
1846 	if (rv || (len < 2)) {
1847 		dev_warn(&ssif_info->client->dev,
1848 			 "Error setting global enables: %d %d %2.2x\n",
1849 			 rv, len, resp[2]);
1850 		rv = 0; /* Not fatal */
1851 		goto found;
1852 	}
1853 
1854 	if (resp[2] == 0) {
1855 		/* A successful return means the alert is supported. */
1856 		ssif_info->supports_alert = true;
1857 		ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR;
1858 	}
1859 
1860  found:
1861 	if (ssif_dbg_probe) {
1862 		dev_dbg(&ssif_info->client->dev,
1863 		       "%s: i2c_probe found device at i2c address %x\n",
1864 		       __func__, client->addr);
1865 	}
1866 
1867 	spin_lock_init(&ssif_info->lock);
1868 	ssif_info->ssif_state = SSIF_NORMAL;
1869 	timer_setup(&ssif_info->retry_timer, retry_timeout, 0);
1870 	timer_setup(&ssif_info->watch_timer, watch_timeout, 0);
1871 
1872 	for (i = 0; i < SSIF_NUM_STATS; i++)
1873 		atomic_set(&ssif_info->stats[i], 0);
1874 
1875 	if (ssif_info->supports_pec)
1876 		ssif_info->client->flags |= I2C_CLIENT_PEC;
1877 
1878 	ssif_info->handlers.owner = THIS_MODULE;
1879 	ssif_info->handlers.start_processing = ssif_start_processing;
1880 	ssif_info->handlers.shutdown = shutdown_ssif;
1881 	ssif_info->handlers.get_smi_info = get_smi_info;
1882 	ssif_info->handlers.sender = sender;
1883 	ssif_info->handlers.request_events = request_events;
1884 	ssif_info->handlers.set_need_watch = ssif_set_need_watch;
1885 
1886 	{
1887 		unsigned int thread_num;
1888 
1889 		thread_num = ((i2c_adapter_id(ssif_info->client->adapter)
1890 			       << 8) |
1891 			      ssif_info->client->addr);
1892 		init_completion(&ssif_info->wake_thread);
1893 		ssif_info->thread = kthread_run(ipmi_ssif_thread, ssif_info,
1894 					       "kssif%4.4x", thread_num);
1895 		if (IS_ERR(ssif_info->thread)) {
1896 			rv = PTR_ERR(ssif_info->thread);
1897 			dev_notice(&ssif_info->client->dev,
1898 				   "Could not start kernel thread: error %d\n",
1899 				   rv);
1900 			goto out;
1901 		}
1902 	}
1903 
1904 	dev_set_drvdata(&ssif_info->client->dev, ssif_info);
1905 	rv = device_add_group(&ssif_info->client->dev,
1906 			      &ipmi_ssif_dev_attr_group);
1907 	if (rv) {
1908 		dev_err(&ssif_info->client->dev,
1909 			"Unable to add device attributes: error %d\n",
1910 			rv);
1911 		goto out;
1912 	}
1913 
1914 	rv = ipmi_register_smi(&ssif_info->handlers,
1915 			       ssif_info,
1916 			       &ssif_info->client->dev,
1917 			       slave_addr);
1918 	if (rv) {
1919 		dev_err(&ssif_info->client->dev,
1920 			"Unable to register device: error %d\n", rv);
1921 		goto out_remove_attr;
1922 	}
1923 
1924  out:
1925 	if (rv) {
1926 		if (addr_info)
1927 			addr_info->client = NULL;
1928 
1929 		dev_err(&ssif_info->client->dev,
1930 			"Unable to start IPMI SSIF: %d\n", rv);
1931 		kfree(ssif_info);
1932 	}
1933 	kfree(resp);
1934 	mutex_unlock(&ssif_infos_mutex);
1935 	return rv;
1936 
1937 out_remove_attr:
1938 	device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group);
1939 	dev_set_drvdata(&ssif_info->client->dev, NULL);
1940 	goto out;
1941 }
1942 
1943 static int ssif_adapter_handler(struct device *adev, void *opaque)
1944 {
1945 	struct ssif_addr_info *addr_info = opaque;
1946 
1947 	if (adev->type != &i2c_adapter_type)
1948 		return 0;
1949 
1950 	addr_info->added_client = i2c_new_device(to_i2c_adapter(adev),
1951 						 &addr_info->binfo);
1952 
1953 	if (!addr_info->adapter_name)
1954 		return 1; /* Only try the first I2C adapter by default. */
1955 	return 0;
1956 }
1957 
1958 static int new_ssif_client(int addr, char *adapter_name,
1959 			   int debug, int slave_addr,
1960 			   enum ipmi_addr_src addr_src,
1961 			   struct device *dev)
1962 {
1963 	struct ssif_addr_info *addr_info;
1964 	int rv = 0;
1965 
1966 	mutex_lock(&ssif_infos_mutex);
1967 	if (ssif_info_find(addr, adapter_name, false)) {
1968 		rv = -EEXIST;
1969 		goto out_unlock;
1970 	}
1971 
1972 	addr_info = kzalloc(sizeof(*addr_info), GFP_KERNEL);
1973 	if (!addr_info) {
1974 		rv = -ENOMEM;
1975 		goto out_unlock;
1976 	}
1977 
1978 	if (adapter_name) {
1979 		addr_info->adapter_name = kstrdup(adapter_name, GFP_KERNEL);
1980 		if (!addr_info->adapter_name) {
1981 			kfree(addr_info);
1982 			rv = -ENOMEM;
1983 			goto out_unlock;
1984 		}
1985 	}
1986 
1987 	strncpy(addr_info->binfo.type, DEVICE_NAME,
1988 		sizeof(addr_info->binfo.type));
1989 	addr_info->binfo.addr = addr;
1990 	addr_info->binfo.platform_data = addr_info;
1991 	addr_info->debug = debug;
1992 	addr_info->slave_addr = slave_addr;
1993 	addr_info->addr_src = addr_src;
1994 	addr_info->dev = dev;
1995 
1996 	if (dev)
1997 		dev_set_drvdata(dev, addr_info);
1998 
1999 	list_add_tail(&addr_info->link, &ssif_infos);
2000 
2001 	if (initialized)
2002 		i2c_for_each_dev(addr_info, ssif_adapter_handler);
2003 	/* Otherwise address list will get it */
2004 
2005 out_unlock:
2006 	mutex_unlock(&ssif_infos_mutex);
2007 	return rv;
2008 }
2009 
2010 static void free_ssif_clients(void)
2011 {
2012 	struct ssif_addr_info *info, *tmp;
2013 
2014 	mutex_lock(&ssif_infos_mutex);
2015 	list_for_each_entry_safe(info, tmp, &ssif_infos, link) {
2016 		list_del(&info->link);
2017 		kfree(info->adapter_name);
2018 		kfree(info);
2019 	}
2020 	mutex_unlock(&ssif_infos_mutex);
2021 }
2022 
2023 static unsigned short *ssif_address_list(void)
2024 {
2025 	struct ssif_addr_info *info;
2026 	unsigned int count = 0, i = 0;
2027 	unsigned short *address_list;
2028 
2029 	list_for_each_entry(info, &ssif_infos, link)
2030 		count++;
2031 
2032 	address_list = kcalloc(count + 1, sizeof(*address_list),
2033 			       GFP_KERNEL);
2034 	if (!address_list)
2035 		return NULL;
2036 
2037 	list_for_each_entry(info, &ssif_infos, link) {
2038 		unsigned short addr = info->binfo.addr;
2039 		int j;
2040 
2041 		for (j = 0; j < i; j++) {
2042 			if (address_list[j] == addr)
2043 				/* Found a dup. */
2044 				break;
2045 		}
2046 		if (j == i) /* Didn't find it in the list. */
2047 			address_list[i++] = addr;
2048 	}
2049 	address_list[i] = I2C_CLIENT_END;
2050 
2051 	return address_list;
2052 }
2053 
2054 #ifdef CONFIG_ACPI
2055 static const struct acpi_device_id ssif_acpi_match[] = {
2056 	{ "IPI0001", 0 },
2057 	{ },
2058 };
2059 MODULE_DEVICE_TABLE(acpi, ssif_acpi_match);
2060 #endif
2061 
2062 #ifdef CONFIG_DMI
2063 static int dmi_ipmi_probe(struct platform_device *pdev)
2064 {
2065 	u8 slave_addr = 0;
2066 	u16 i2c_addr;
2067 	int rv;
2068 
2069 	if (!ssif_trydmi)
2070 		return -ENODEV;
2071 
2072 	rv = device_property_read_u16(&pdev->dev, "i2c-addr", &i2c_addr);
2073 	if (rv) {
2074 		dev_warn(&pdev->dev, "No i2c-addr property\n");
2075 		return -ENODEV;
2076 	}
2077 
2078 	rv = device_property_read_u8(&pdev->dev, "slave-addr", &slave_addr);
2079 	if (rv)
2080 		slave_addr = 0x20;
2081 
2082 	return new_ssif_client(i2c_addr, NULL, 0,
2083 			       slave_addr, SI_SMBIOS, &pdev->dev);
2084 }
2085 #else
2086 static int dmi_ipmi_probe(struct platform_device *pdev)
2087 {
2088 	return -ENODEV;
2089 }
2090 #endif
2091 
2092 static const struct i2c_device_id ssif_id[] = {
2093 	{ DEVICE_NAME, 0 },
2094 	{ }
2095 };
2096 MODULE_DEVICE_TABLE(i2c, ssif_id);
2097 
2098 static struct i2c_driver ssif_i2c_driver = {
2099 	.class		= I2C_CLASS_HWMON,
2100 	.driver		= {
2101 		.name			= DEVICE_NAME
2102 	},
2103 	.probe		= ssif_probe,
2104 	.remove		= ssif_remove,
2105 	.alert		= ssif_alert,
2106 	.id_table	= ssif_id,
2107 	.detect		= ssif_detect
2108 };
2109 
2110 static int ssif_platform_probe(struct platform_device *dev)
2111 {
2112 	return dmi_ipmi_probe(dev);
2113 }
2114 
2115 static int ssif_platform_remove(struct platform_device *dev)
2116 {
2117 	struct ssif_addr_info *addr_info = dev_get_drvdata(&dev->dev);
2118 
2119 	if (!addr_info)
2120 		return 0;
2121 
2122 	mutex_lock(&ssif_infos_mutex);
2123 	i2c_unregister_device(addr_info->added_client);
2124 
2125 	list_del(&addr_info->link);
2126 	kfree(addr_info);
2127 	mutex_unlock(&ssif_infos_mutex);
2128 	return 0;
2129 }
2130 
2131 static const struct platform_device_id ssif_plat_ids[] = {
2132     { "dmi-ipmi-ssif", 0 },
2133     { }
2134 };
2135 
2136 static struct platform_driver ipmi_driver = {
2137 	.driver = {
2138 		.name = DEVICE_NAME,
2139 	},
2140 	.probe		= ssif_platform_probe,
2141 	.remove		= ssif_platform_remove,
2142 	.id_table       = ssif_plat_ids
2143 };
2144 
2145 static int init_ipmi_ssif(void)
2146 {
2147 	int i;
2148 	int rv;
2149 
2150 	if (initialized)
2151 		return 0;
2152 
2153 	pr_info("IPMI SSIF Interface driver\n");
2154 
2155 	/* build list for i2c from addr list */
2156 	for (i = 0; i < num_addrs; i++) {
2157 		rv = new_ssif_client(addr[i], adapter_name[i],
2158 				     dbg[i], slave_addrs[i],
2159 				     SI_HARDCODED, NULL);
2160 		if (rv)
2161 			pr_err("Couldn't add hardcoded device at addr 0x%x\n",
2162 			       addr[i]);
2163 	}
2164 
2165 	if (ssif_tryacpi)
2166 		ssif_i2c_driver.driver.acpi_match_table	=
2167 			ACPI_PTR(ssif_acpi_match);
2168 
2169 	if (ssif_trydmi) {
2170 		rv = platform_driver_register(&ipmi_driver);
2171 		if (rv)
2172 			pr_err("Unable to register driver: %d\n", rv);
2173 		else
2174 			platform_registered = true;
2175 	}
2176 
2177 	ssif_i2c_driver.address_list = ssif_address_list();
2178 
2179 	rv = i2c_add_driver(&ssif_i2c_driver);
2180 	if (!rv)
2181 		initialized = true;
2182 
2183 	return rv;
2184 }
2185 module_init(init_ipmi_ssif);
2186 
2187 static void cleanup_ipmi_ssif(void)
2188 {
2189 	if (!initialized)
2190 		return;
2191 
2192 	initialized = false;
2193 
2194 	i2c_del_driver(&ssif_i2c_driver);
2195 
2196 	kfree(ssif_i2c_driver.address_list);
2197 
2198 	if (ssif_trydmi && platform_registered)
2199 		platform_driver_unregister(&ipmi_driver);
2200 
2201 	free_ssif_clients();
2202 }
2203 module_exit(cleanup_ipmi_ssif);
2204 
2205 MODULE_ALIAS("platform:dmi-ipmi-ssif");
2206 MODULE_AUTHOR("Todd C Davis <todd.c.davis@intel.com>, Corey Minyard <minyard@acm.org>");
2207 MODULE_DESCRIPTION("IPMI driver for management controllers on a SMBus");
2208 MODULE_LICENSE("GPL");
2209