xref: /openbmc/linux/drivers/char/ipmi/ipmi_ssif.c (revision a8da474e)
1 /*
2  * ipmi_ssif.c
3  *
4  * The interface to the IPMI driver for SMBus access to a SMBus
5  * compliant device.  Called SSIF by the IPMI spec.
6  *
7  * Author: Intel Corporation
8  *         Todd Davis <todd.c.davis@intel.com>
9  *
10  * Rewritten by Corey Minyard <minyard@acm.org> to support the
11  * non-blocking I2C interface, add support for multi-part
12  * transactions, add PEC support, and general clenaup.
13  *
14  * Copyright 2003 Intel Corporation
15  * Copyright 2005 MontaVista Software
16  *
17  *  This program is free software; you can redistribute it and/or modify it
18  *  under the terms of the GNU General Public License as published by the
19  *  Free Software Foundation; either version 2 of the License, or (at your
20  *  option) any later version.
21  */
22 
23 /*
24  * This file holds the "policy" for the interface to the SSIF state
25  * machine.  It does the configuration, handles timers and interrupts,
26  * and drives the real SSIF state machine.
27  */
28 
29 /*
30  * TODO: Figure out how to use SMB alerts.  This will require a new
31  * interface into the I2C driver, I believe.
32  */
33 
34 #if defined(MODVERSIONS)
35 #include <linux/modversions.h>
36 #endif
37 
38 #include <linux/module.h>
39 #include <linux/moduleparam.h>
40 #include <linux/sched.h>
41 #include <linux/seq_file.h>
42 #include <linux/timer.h>
43 #include <linux/delay.h>
44 #include <linux/errno.h>
45 #include <linux/spinlock.h>
46 #include <linux/slab.h>
47 #include <linux/list.h>
48 #include <linux/i2c.h>
49 #include <linux/ipmi_smi.h>
50 #include <linux/init.h>
51 #include <linux/dmi.h>
52 #include <linux/kthread.h>
53 #include <linux/acpi.h>
54 #include <linux/ctype.h>
55 #include <linux/time64.h>
56 
57 #define PFX "ipmi_ssif: "
58 #define DEVICE_NAME "ipmi_ssif"
59 
60 #define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD	0x57
61 
62 #define	SSIF_IPMI_REQUEST			2
63 #define	SSIF_IPMI_MULTI_PART_REQUEST_START	6
64 #define	SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE	7
65 #define	SSIF_IPMI_RESPONSE			3
66 #define	SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE	9
67 
68 /* ssif_debug is a bit-field
69  *	SSIF_DEBUG_MSG -	commands and their responses
70  *	SSIF_DEBUG_STATES -	message states
71  *	SSIF_DEBUG_TIMING -	 Measure times between events in the driver
72  */
73 #define SSIF_DEBUG_TIMING	4
74 #define SSIF_DEBUG_STATE	2
75 #define SSIF_DEBUG_MSG		1
76 #define SSIF_NODEBUG		0
77 #define SSIF_DEFAULT_DEBUG	(SSIF_NODEBUG)
78 
79 /*
80  * Timer values
81  */
82 #define SSIF_MSG_USEC		20000	/* 20ms between message tries. */
83 #define SSIF_MSG_PART_USEC	5000	/* 5ms for a message part */
84 
85 /* How many times to we retry sending/receiving the message. */
86 #define	SSIF_SEND_RETRIES	5
87 #define	SSIF_RECV_RETRIES	250
88 
89 #define SSIF_MSG_MSEC		(SSIF_MSG_USEC / 1000)
90 #define SSIF_MSG_JIFFIES	((SSIF_MSG_USEC * 1000) / TICK_NSEC)
91 #define SSIF_MSG_PART_JIFFIES	((SSIF_MSG_PART_USEC * 1000) / TICK_NSEC)
92 
93 enum ssif_intf_state {
94 	SSIF_NORMAL,
95 	SSIF_GETTING_FLAGS,
96 	SSIF_GETTING_EVENTS,
97 	SSIF_CLEARING_FLAGS,
98 	SSIF_GETTING_MESSAGES,
99 	/* FIXME - add watchdog stuff. */
100 };
101 
102 #define SSIF_IDLE(ssif)	 ((ssif)->ssif_state == SSIF_NORMAL \
103 			  && (ssif)->curr_msg == NULL)
104 
105 /*
106  * Indexes into stats[] in ssif_info below.
107  */
108 enum ssif_stat_indexes {
109 	/* Number of total messages sent. */
110 	SSIF_STAT_sent_messages = 0,
111 
112 	/*
113 	 * Number of message parts sent.  Messages may be broken into
114 	 * parts if they are long.
115 	 */
116 	SSIF_STAT_sent_messages_parts,
117 
118 	/*
119 	 * Number of time a message was retried.
120 	 */
121 	SSIF_STAT_send_retries,
122 
123 	/*
124 	 * Number of times the send of a message failed.
125 	 */
126 	SSIF_STAT_send_errors,
127 
128 	/*
129 	 * Number of message responses received.
130 	 */
131 	SSIF_STAT_received_messages,
132 
133 	/*
134 	 * Number of message fragments received.
135 	 */
136 	SSIF_STAT_received_message_parts,
137 
138 	/*
139 	 * Number of times the receive of a message was retried.
140 	 */
141 	SSIF_STAT_receive_retries,
142 
143 	/*
144 	 * Number of errors receiving messages.
145 	 */
146 	SSIF_STAT_receive_errors,
147 
148 	/*
149 	 * Number of times a flag fetch was requested.
150 	 */
151 	SSIF_STAT_flag_fetches,
152 
153 	/*
154 	 * Number of times the hardware didn't follow the state machine.
155 	 */
156 	SSIF_STAT_hosed,
157 
158 	/*
159 	 * Number of received events.
160 	 */
161 	SSIF_STAT_events,
162 
163 	/* Number of asyncronous messages received. */
164 	SSIF_STAT_incoming_messages,
165 
166 	/* Number of watchdog pretimeouts. */
167 	SSIF_STAT_watchdog_pretimeouts,
168 
169 	/* Number of alers received. */
170 	SSIF_STAT_alerts,
171 
172 	/* Always add statistics before this value, it must be last. */
173 	SSIF_NUM_STATS
174 };
175 
176 struct ssif_addr_info {
177 	unsigned short addr;
178 	struct i2c_board_info binfo;
179 	char *adapter_name;
180 	int debug;
181 	int slave_addr;
182 	enum ipmi_addr_src addr_src;
183 	union ipmi_smi_info_union addr_info;
184 
185 	struct mutex clients_mutex;
186 	struct list_head clients;
187 
188 	struct list_head link;
189 };
190 
191 struct ssif_info;
192 
193 typedef void (*ssif_i2c_done)(struct ssif_info *ssif_info, int result,
194 			     unsigned char *data, unsigned int len);
195 
196 struct ssif_info {
197 	ipmi_smi_t          intf;
198 	int                 intf_num;
199 	spinlock_t	    lock;
200 	struct ipmi_smi_msg *waiting_msg;
201 	struct ipmi_smi_msg *curr_msg;
202 	enum ssif_intf_state ssif_state;
203 	unsigned long       ssif_debug;
204 
205 	struct ipmi_smi_handlers handlers;
206 
207 	enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */
208 	union ipmi_smi_info_union addr_info;
209 
210 	/*
211 	 * Flags from the last GET_MSG_FLAGS command, used when an ATTN
212 	 * is set to hold the flags until we are done handling everything
213 	 * from the flags.
214 	 */
215 #define RECEIVE_MSG_AVAIL	0x01
216 #define EVENT_MSG_BUFFER_FULL	0x02
217 #define WDT_PRE_TIMEOUT_INT	0x08
218 	unsigned char       msg_flags;
219 
220 	u8		    global_enables;
221 	bool		    has_event_buffer;
222 	bool		    supports_alert;
223 
224 	/*
225 	 * Used to tell what we should do with alerts.  If we are
226 	 * waiting on a response, read the data immediately.
227 	 */
228 	bool		    got_alert;
229 	bool		    waiting_alert;
230 
231 	/*
232 	 * If set to true, this will request events the next time the
233 	 * state machine is idle.
234 	 */
235 	bool                req_events;
236 
237 	/*
238 	 * If set to true, this will request flags the next time the
239 	 * state machine is idle.
240 	 */
241 	bool                req_flags;
242 
243 	/*
244 	 * Used to perform timer operations when run-to-completion
245 	 * mode is on.  This is a countdown timer.
246 	 */
247 	int                 rtc_us_timer;
248 
249 	/* Used for sending/receiving data.  +1 for the length. */
250 	unsigned char data[IPMI_MAX_MSG_LENGTH + 1];
251 	unsigned int  data_len;
252 
253 	/* Temp receive buffer, gets copied into data. */
254 	unsigned char recv[I2C_SMBUS_BLOCK_MAX];
255 
256 	struct i2c_client *client;
257 	ssif_i2c_done done_handler;
258 
259 	/* Thread interface handling */
260 	struct task_struct *thread;
261 	struct completion wake_thread;
262 	bool stopping;
263 	int i2c_read_write;
264 	int i2c_command;
265 	unsigned char *i2c_data;
266 	unsigned int i2c_size;
267 
268 	/* From the device id response. */
269 	struct ipmi_device_id device_id;
270 
271 	struct timer_list retry_timer;
272 	int retries_left;
273 
274 	/* Info from SSIF cmd */
275 	unsigned char max_xmit_msg_size;
276 	unsigned char max_recv_msg_size;
277 	unsigned int  multi_support;
278 	int           supports_pec;
279 
280 #define SSIF_NO_MULTI		0
281 #define SSIF_MULTI_2_PART	1
282 #define SSIF_MULTI_n_PART	2
283 	unsigned char *multi_data;
284 	unsigned int  multi_len;
285 	unsigned int  multi_pos;
286 
287 	atomic_t stats[SSIF_NUM_STATS];
288 };
289 
290 #define ssif_inc_stat(ssif, stat) \
291 	atomic_inc(&(ssif)->stats[SSIF_STAT_ ## stat])
292 #define ssif_get_stat(ssif, stat) \
293 	((unsigned int) atomic_read(&(ssif)->stats[SSIF_STAT_ ## stat]))
294 
295 static bool initialized;
296 
297 static atomic_t next_intf = ATOMIC_INIT(0);
298 
299 static void return_hosed_msg(struct ssif_info *ssif_info,
300 			     struct ipmi_smi_msg *msg);
301 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags);
302 static int start_send(struct ssif_info *ssif_info,
303 		      unsigned char   *data,
304 		      unsigned int    len);
305 
306 static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info,
307 					  unsigned long *flags)
308 {
309 	spin_lock_irqsave(&ssif_info->lock, *flags);
310 	return flags;
311 }
312 
313 static void ipmi_ssif_unlock_cond(struct ssif_info *ssif_info,
314 				  unsigned long *flags)
315 {
316 	spin_unlock_irqrestore(&ssif_info->lock, *flags);
317 }
318 
319 static void deliver_recv_msg(struct ssif_info *ssif_info,
320 			     struct ipmi_smi_msg *msg)
321 {
322 	ipmi_smi_t    intf = ssif_info->intf;
323 
324 	if (!intf) {
325 		ipmi_free_smi_msg(msg);
326 	} else if (msg->rsp_size < 0) {
327 		return_hosed_msg(ssif_info, msg);
328 		pr_err(PFX
329 		       "Malformed message in deliver_recv_msg: rsp_size = %d\n",
330 		       msg->rsp_size);
331 	} else {
332 		ipmi_smi_msg_received(intf, msg);
333 	}
334 }
335 
336 static void return_hosed_msg(struct ssif_info *ssif_info,
337 			     struct ipmi_smi_msg *msg)
338 {
339 	ssif_inc_stat(ssif_info, hosed);
340 
341 	/* Make it a response */
342 	msg->rsp[0] = msg->data[0] | 4;
343 	msg->rsp[1] = msg->data[1];
344 	msg->rsp[2] = 0xFF; /* Unknown error. */
345 	msg->rsp_size = 3;
346 
347 	deliver_recv_msg(ssif_info, msg);
348 }
349 
350 /*
351  * Must be called with the message lock held.  This will release the
352  * message lock.  Note that the caller will check SSIF_IDLE and start a
353  * new operation, so there is no need to check for new messages to
354  * start in here.
355  */
356 static void start_clear_flags(struct ssif_info *ssif_info, unsigned long *flags)
357 {
358 	unsigned char msg[3];
359 
360 	ssif_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
361 	ssif_info->ssif_state = SSIF_CLEARING_FLAGS;
362 	ipmi_ssif_unlock_cond(ssif_info, flags);
363 
364 	/* Make sure the watchdog pre-timeout flag is not set at startup. */
365 	msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
366 	msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
367 	msg[2] = WDT_PRE_TIMEOUT_INT;
368 
369 	if (start_send(ssif_info, msg, 3) != 0) {
370 		/* Error, just go to normal state. */
371 		ssif_info->ssif_state = SSIF_NORMAL;
372 	}
373 }
374 
375 static void start_flag_fetch(struct ssif_info *ssif_info, unsigned long *flags)
376 {
377 	unsigned char mb[2];
378 
379 	ssif_info->req_flags = false;
380 	ssif_info->ssif_state = SSIF_GETTING_FLAGS;
381 	ipmi_ssif_unlock_cond(ssif_info, flags);
382 
383 	mb[0] = (IPMI_NETFN_APP_REQUEST << 2);
384 	mb[1] = IPMI_GET_MSG_FLAGS_CMD;
385 	if (start_send(ssif_info, mb, 2) != 0)
386 		ssif_info->ssif_state = SSIF_NORMAL;
387 }
388 
389 static void check_start_send(struct ssif_info *ssif_info, unsigned long *flags,
390 			     struct ipmi_smi_msg *msg)
391 {
392 	if (start_send(ssif_info, msg->data, msg->data_size) != 0) {
393 		unsigned long oflags;
394 
395 		flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
396 		ssif_info->curr_msg = NULL;
397 		ssif_info->ssif_state = SSIF_NORMAL;
398 		ipmi_ssif_unlock_cond(ssif_info, flags);
399 		ipmi_free_smi_msg(msg);
400 	}
401 }
402 
403 static void start_event_fetch(struct ssif_info *ssif_info, unsigned long *flags)
404 {
405 	struct ipmi_smi_msg *msg;
406 
407 	ssif_info->req_events = false;
408 
409 	msg = ipmi_alloc_smi_msg();
410 	if (!msg) {
411 		ssif_info->ssif_state = SSIF_NORMAL;
412 		return;
413 	}
414 
415 	ssif_info->curr_msg = msg;
416 	ssif_info->ssif_state = SSIF_GETTING_EVENTS;
417 	ipmi_ssif_unlock_cond(ssif_info, flags);
418 
419 	msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
420 	msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
421 	msg->data_size = 2;
422 
423 	check_start_send(ssif_info, flags, msg);
424 }
425 
426 static void start_recv_msg_fetch(struct ssif_info *ssif_info,
427 				 unsigned long *flags)
428 {
429 	struct ipmi_smi_msg *msg;
430 
431 	msg = ipmi_alloc_smi_msg();
432 	if (!msg) {
433 		ssif_info->ssif_state = SSIF_NORMAL;
434 		return;
435 	}
436 
437 	ssif_info->curr_msg = msg;
438 	ssif_info->ssif_state = SSIF_GETTING_MESSAGES;
439 	ipmi_ssif_unlock_cond(ssif_info, flags);
440 
441 	msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
442 	msg->data[1] = IPMI_GET_MSG_CMD;
443 	msg->data_size = 2;
444 
445 	check_start_send(ssif_info, flags, msg);
446 }
447 
448 /*
449  * Must be called with the message lock held.  This will release the
450  * message lock.  Note that the caller will check SSIF_IDLE and start a
451  * new operation, so there is no need to check for new messages to
452  * start in here.
453  */
454 static void handle_flags(struct ssif_info *ssif_info, unsigned long *flags)
455 {
456 	if (ssif_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
457 		ipmi_smi_t intf = ssif_info->intf;
458 		/* Watchdog pre-timeout */
459 		ssif_inc_stat(ssif_info, watchdog_pretimeouts);
460 		start_clear_flags(ssif_info, flags);
461 		if (intf)
462 			ipmi_smi_watchdog_pretimeout(intf);
463 	} else if (ssif_info->msg_flags & RECEIVE_MSG_AVAIL)
464 		/* Messages available. */
465 		start_recv_msg_fetch(ssif_info, flags);
466 	else if (ssif_info->msg_flags & EVENT_MSG_BUFFER_FULL)
467 		/* Events available. */
468 		start_event_fetch(ssif_info, flags);
469 	else {
470 		ssif_info->ssif_state = SSIF_NORMAL;
471 		ipmi_ssif_unlock_cond(ssif_info, flags);
472 	}
473 }
474 
475 static int ipmi_ssif_thread(void *data)
476 {
477 	struct ssif_info *ssif_info = data;
478 
479 	while (!kthread_should_stop()) {
480 		int result;
481 
482 		/* Wait for something to do */
483 		result = wait_for_completion_interruptible(
484 						&ssif_info->wake_thread);
485 		if (ssif_info->stopping)
486 			break;
487 		if (result == -ERESTARTSYS)
488 			continue;
489 		init_completion(&ssif_info->wake_thread);
490 
491 		if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) {
492 			result = i2c_smbus_write_block_data(
493 				ssif_info->client, ssif_info->i2c_command,
494 				ssif_info->i2c_data[0],
495 				ssif_info->i2c_data + 1);
496 			ssif_info->done_handler(ssif_info, result, NULL, 0);
497 		} else {
498 			result = i2c_smbus_read_block_data(
499 				ssif_info->client, ssif_info->i2c_command,
500 				ssif_info->i2c_data);
501 			if (result < 0)
502 				ssif_info->done_handler(ssif_info, result,
503 							NULL, 0);
504 			else
505 				ssif_info->done_handler(ssif_info, 0,
506 							ssif_info->i2c_data,
507 							result);
508 		}
509 	}
510 
511 	return 0;
512 }
513 
514 static int ssif_i2c_send(struct ssif_info *ssif_info,
515 			ssif_i2c_done handler,
516 			int read_write, int command,
517 			unsigned char *data, unsigned int size)
518 {
519 	ssif_info->done_handler = handler;
520 
521 	ssif_info->i2c_read_write = read_write;
522 	ssif_info->i2c_command = command;
523 	ssif_info->i2c_data = data;
524 	ssif_info->i2c_size = size;
525 	complete(&ssif_info->wake_thread);
526 	return 0;
527 }
528 
529 
530 static void msg_done_handler(struct ssif_info *ssif_info, int result,
531 			     unsigned char *data, unsigned int len);
532 
533 static void start_get(struct ssif_info *ssif_info)
534 {
535 	int rv;
536 
537 	ssif_info->rtc_us_timer = 0;
538 	ssif_info->multi_pos = 0;
539 
540 	rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
541 			  SSIF_IPMI_RESPONSE,
542 			  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
543 	if (rv < 0) {
544 		/* request failed, just return the error. */
545 		if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
546 			pr_info("Error from i2c_non_blocking_op(5)\n");
547 
548 		msg_done_handler(ssif_info, -EIO, NULL, 0);
549 	}
550 }
551 
552 static void retry_timeout(unsigned long data)
553 {
554 	struct ssif_info *ssif_info = (void *) data;
555 	unsigned long oflags, *flags;
556 	bool waiting;
557 
558 	if (ssif_info->stopping)
559 		return;
560 
561 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
562 	waiting = ssif_info->waiting_alert;
563 	ssif_info->waiting_alert = false;
564 	ipmi_ssif_unlock_cond(ssif_info, flags);
565 
566 	if (waiting)
567 		start_get(ssif_info);
568 }
569 
570 
571 static void ssif_alert(struct i2c_client *client, unsigned int data)
572 {
573 	struct ssif_info *ssif_info = i2c_get_clientdata(client);
574 	unsigned long oflags, *flags;
575 	bool do_get = false;
576 
577 	ssif_inc_stat(ssif_info, alerts);
578 
579 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
580 	if (ssif_info->waiting_alert) {
581 		ssif_info->waiting_alert = false;
582 		del_timer(&ssif_info->retry_timer);
583 		do_get = true;
584 	} else if (ssif_info->curr_msg) {
585 		ssif_info->got_alert = true;
586 	}
587 	ipmi_ssif_unlock_cond(ssif_info, flags);
588 	if (do_get)
589 		start_get(ssif_info);
590 }
591 
592 static int start_resend(struct ssif_info *ssif_info);
593 
594 static void msg_done_handler(struct ssif_info *ssif_info, int result,
595 			     unsigned char *data, unsigned int len)
596 {
597 	struct ipmi_smi_msg *msg;
598 	unsigned long oflags, *flags;
599 	int rv;
600 
601 	/*
602 	 * We are single-threaded here, so no need for a lock until we
603 	 * start messing with driver states or the queues.
604 	 */
605 
606 	if (result < 0) {
607 		ssif_info->retries_left--;
608 		if (ssif_info->retries_left > 0) {
609 			ssif_inc_stat(ssif_info, receive_retries);
610 
611 			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
612 			ssif_info->waiting_alert = true;
613 			ssif_info->rtc_us_timer = SSIF_MSG_USEC;
614 			mod_timer(&ssif_info->retry_timer,
615 				  jiffies + SSIF_MSG_JIFFIES);
616 			ipmi_ssif_unlock_cond(ssif_info, flags);
617 			return;
618 		}
619 
620 		ssif_inc_stat(ssif_info, receive_errors);
621 
622 		if  (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
623 			pr_info("Error in msg_done_handler: %d\n", result);
624 		len = 0;
625 		goto continue_op;
626 	}
627 
628 	if ((len > 1) && (ssif_info->multi_pos == 0)
629 				&& (data[0] == 0x00) && (data[1] == 0x01)) {
630 		/* Start of multi-part read.  Start the next transaction. */
631 		int i;
632 
633 		ssif_inc_stat(ssif_info, received_message_parts);
634 
635 		/* Remove the multi-part read marker. */
636 		len -= 2;
637 		for (i = 0; i < len; i++)
638 			ssif_info->data[i] = data[i+2];
639 		ssif_info->multi_len = len;
640 		ssif_info->multi_pos = 1;
641 
642 		rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
643 				  SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
644 				  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
645 		if (rv < 0) {
646 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
647 				pr_info("Error from i2c_non_blocking_op(1)\n");
648 
649 			result = -EIO;
650 		} else
651 			return;
652 	} else if (ssif_info->multi_pos) {
653 		/* Middle of multi-part read.  Start the next transaction. */
654 		int i;
655 		unsigned char blocknum;
656 
657 		if (len == 0) {
658 			result = -EIO;
659 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
660 				pr_info(PFX "Middle message with no data\n");
661 
662 			goto continue_op;
663 		}
664 
665 		blocknum = data[0];
666 
667 		if (ssif_info->multi_len + len - 1 > IPMI_MAX_MSG_LENGTH) {
668 			/* Received message too big, abort the operation. */
669 			result = -E2BIG;
670 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
671 				pr_info("Received message too big\n");
672 
673 			goto continue_op;
674 		}
675 
676 		/* Remove the blocknum from the data. */
677 		len--;
678 		for (i = 0; i < len; i++)
679 			ssif_info->data[i + ssif_info->multi_len] = data[i + 1];
680 		ssif_info->multi_len += len;
681 		if (blocknum == 0xff) {
682 			/* End of read */
683 			len = ssif_info->multi_len;
684 			data = ssif_info->data;
685 		} else if (blocknum + 1 != ssif_info->multi_pos) {
686 			/*
687 			 * Out of sequence block, just abort.  Block
688 			 * numbers start at zero for the second block,
689 			 * but multi_pos starts at one, so the +1.
690 			 */
691 			result = -EIO;
692 		} else {
693 			ssif_inc_stat(ssif_info, received_message_parts);
694 
695 			ssif_info->multi_pos++;
696 
697 			rv = ssif_i2c_send(ssif_info, msg_done_handler,
698 					   I2C_SMBUS_READ,
699 					   SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
700 					   ssif_info->recv,
701 					   I2C_SMBUS_BLOCK_DATA);
702 			if (rv < 0) {
703 				if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
704 					pr_info(PFX
705 						"Error from ssif_i2c_send\n");
706 
707 				result = -EIO;
708 			} else
709 				return;
710 		}
711 	}
712 
713 	if (result < 0) {
714 		ssif_inc_stat(ssif_info, receive_errors);
715 	} else {
716 		ssif_inc_stat(ssif_info, received_messages);
717 		ssif_inc_stat(ssif_info, received_message_parts);
718 	}
719 
720 
721  continue_op:
722 	if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
723 		pr_info(PFX "DONE 1: state = %d, result=%d.\n",
724 			ssif_info->ssif_state, result);
725 
726 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
727 	msg = ssif_info->curr_msg;
728 	if (msg) {
729 		msg->rsp_size = len;
730 		if (msg->rsp_size > IPMI_MAX_MSG_LENGTH)
731 			msg->rsp_size = IPMI_MAX_MSG_LENGTH;
732 		memcpy(msg->rsp, data, msg->rsp_size);
733 		ssif_info->curr_msg = NULL;
734 	}
735 
736 	switch (ssif_info->ssif_state) {
737 	case SSIF_NORMAL:
738 		ipmi_ssif_unlock_cond(ssif_info, flags);
739 		if (!msg)
740 			break;
741 
742 		if (result < 0)
743 			return_hosed_msg(ssif_info, msg);
744 		else
745 			deliver_recv_msg(ssif_info, msg);
746 		break;
747 
748 	case SSIF_GETTING_FLAGS:
749 		/* We got the flags from the SSIF, now handle them. */
750 		if ((result < 0) || (len < 4) || (data[2] != 0)) {
751 			/*
752 			 * Error fetching flags, or invalid length,
753 			 * just give up for now.
754 			 */
755 			ssif_info->ssif_state = SSIF_NORMAL;
756 			ipmi_ssif_unlock_cond(ssif_info, flags);
757 			pr_warn(PFX "Error getting flags: %d %d, %x\n",
758 			       result, len, data[2]);
759 		} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
760 			   || data[1] != IPMI_GET_MSG_FLAGS_CMD) {
761 			pr_warn(PFX "Invalid response getting flags: %x %x\n",
762 				data[0], data[1]);
763 		} else {
764 			ssif_inc_stat(ssif_info, flag_fetches);
765 			ssif_info->msg_flags = data[3];
766 			handle_flags(ssif_info, flags);
767 		}
768 		break;
769 
770 	case SSIF_CLEARING_FLAGS:
771 		/* We cleared the flags. */
772 		if ((result < 0) || (len < 3) || (data[2] != 0)) {
773 			/* Error clearing flags */
774 			pr_warn(PFX "Error clearing flags: %d %d, %x\n",
775 			       result, len, data[2]);
776 		} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
777 			   || data[1] != IPMI_CLEAR_MSG_FLAGS_CMD) {
778 			pr_warn(PFX "Invalid response clearing flags: %x %x\n",
779 				data[0], data[1]);
780 		}
781 		ssif_info->ssif_state = SSIF_NORMAL;
782 		ipmi_ssif_unlock_cond(ssif_info, flags);
783 		break;
784 
785 	case SSIF_GETTING_EVENTS:
786 		if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
787 			/* Error getting event, probably done. */
788 			msg->done(msg);
789 
790 			/* Take off the event flag. */
791 			ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
792 			handle_flags(ssif_info, flags);
793 		} else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
794 			   || msg->rsp[1] != IPMI_READ_EVENT_MSG_BUFFER_CMD) {
795 			pr_warn(PFX "Invalid response getting events: %x %x\n",
796 				msg->rsp[0], msg->rsp[1]);
797 			msg->done(msg);
798 			/* Take off the event flag. */
799 			ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
800 			handle_flags(ssif_info, flags);
801 		} else {
802 			handle_flags(ssif_info, flags);
803 			ssif_inc_stat(ssif_info, events);
804 			deliver_recv_msg(ssif_info, msg);
805 		}
806 		break;
807 
808 	case SSIF_GETTING_MESSAGES:
809 		if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
810 			/* Error getting event, probably done. */
811 			msg->done(msg);
812 
813 			/* Take off the msg flag. */
814 			ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
815 			handle_flags(ssif_info, flags);
816 		} else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
817 			   || msg->rsp[1] != IPMI_GET_MSG_CMD) {
818 			pr_warn(PFX "Invalid response clearing flags: %x %x\n",
819 				msg->rsp[0], msg->rsp[1]);
820 			msg->done(msg);
821 
822 			/* Take off the msg flag. */
823 			ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
824 			handle_flags(ssif_info, flags);
825 		} else {
826 			ssif_inc_stat(ssif_info, incoming_messages);
827 			handle_flags(ssif_info, flags);
828 			deliver_recv_msg(ssif_info, msg);
829 		}
830 		break;
831 	}
832 
833 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
834 	if (SSIF_IDLE(ssif_info) && !ssif_info->stopping) {
835 		if (ssif_info->req_events)
836 			start_event_fetch(ssif_info, flags);
837 		else if (ssif_info->req_flags)
838 			start_flag_fetch(ssif_info, flags);
839 		else
840 			start_next_msg(ssif_info, flags);
841 	} else
842 		ipmi_ssif_unlock_cond(ssif_info, flags);
843 
844 	if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
845 		pr_info(PFX "DONE 2: state = %d.\n", ssif_info->ssif_state);
846 }
847 
848 static void msg_written_handler(struct ssif_info *ssif_info, int result,
849 				unsigned char *data, unsigned int len)
850 {
851 	int rv;
852 
853 	/* We are single-threaded here, so no need for a lock. */
854 	if (result < 0) {
855 		ssif_info->retries_left--;
856 		if (ssif_info->retries_left > 0) {
857 			if (!start_resend(ssif_info)) {
858 				ssif_inc_stat(ssif_info, send_retries);
859 				return;
860 			}
861 			/* request failed, just return the error. */
862 			ssif_inc_stat(ssif_info, send_errors);
863 
864 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
865 				pr_info(PFX
866 					"Out of retries in msg_written_handler\n");
867 			msg_done_handler(ssif_info, -EIO, NULL, 0);
868 			return;
869 		}
870 
871 		ssif_inc_stat(ssif_info, send_errors);
872 
873 		/*
874 		 * Got an error on transmit, let the done routine
875 		 * handle it.
876 		 */
877 		if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
878 			pr_info("Error in msg_written_handler: %d\n", result);
879 
880 		msg_done_handler(ssif_info, result, NULL, 0);
881 		return;
882 	}
883 
884 	if (ssif_info->multi_data) {
885 		/*
886 		 * In the middle of a multi-data write.  See the comment
887 		 * in the SSIF_MULTI_n_PART case in the probe function
888 		 * for details on the intricacies of this.
889 		 */
890 		int left;
891 
892 		ssif_inc_stat(ssif_info, sent_messages_parts);
893 
894 		left = ssif_info->multi_len - ssif_info->multi_pos;
895 		if (left > 32)
896 			left = 32;
897 		/* Length byte. */
898 		ssif_info->multi_data[ssif_info->multi_pos] = left;
899 		ssif_info->multi_pos += left;
900 		if (left < 32)
901 			/*
902 			 * Write is finished.  Note that we must end
903 			 * with a write of less than 32 bytes to
904 			 * complete the transaction, even if it is
905 			 * zero bytes.
906 			 */
907 			ssif_info->multi_data = NULL;
908 
909 		rv = ssif_i2c_send(ssif_info, msg_written_handler,
910 				  I2C_SMBUS_WRITE,
911 				  SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
912 				  ssif_info->multi_data + ssif_info->multi_pos,
913 				  I2C_SMBUS_BLOCK_DATA);
914 		if (rv < 0) {
915 			/* request failed, just return the error. */
916 			ssif_inc_stat(ssif_info, send_errors);
917 
918 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
919 				pr_info("Error from i2c_non_blocking_op(3)\n");
920 			msg_done_handler(ssif_info, -EIO, NULL, 0);
921 		}
922 	} else {
923 		unsigned long oflags, *flags;
924 		bool got_alert;
925 
926 		ssif_inc_stat(ssif_info, sent_messages);
927 		ssif_inc_stat(ssif_info, sent_messages_parts);
928 
929 		flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
930 		got_alert = ssif_info->got_alert;
931 		if (got_alert) {
932 			ssif_info->got_alert = false;
933 			ssif_info->waiting_alert = false;
934 		}
935 
936 		if (got_alert) {
937 			ipmi_ssif_unlock_cond(ssif_info, flags);
938 			/* The alert already happened, try now. */
939 			retry_timeout((unsigned long) ssif_info);
940 		} else {
941 			/* Wait a jiffie then request the next message */
942 			ssif_info->waiting_alert = true;
943 			ssif_info->retries_left = SSIF_RECV_RETRIES;
944 			ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
945 			mod_timer(&ssif_info->retry_timer,
946 				  jiffies + SSIF_MSG_PART_JIFFIES);
947 			ipmi_ssif_unlock_cond(ssif_info, flags);
948 		}
949 	}
950 }
951 
952 static int start_resend(struct ssif_info *ssif_info)
953 {
954 	int rv;
955 	int command;
956 
957 	ssif_info->got_alert = false;
958 
959 	if (ssif_info->data_len > 32) {
960 		command = SSIF_IPMI_MULTI_PART_REQUEST_START;
961 		ssif_info->multi_data = ssif_info->data;
962 		ssif_info->multi_len = ssif_info->data_len;
963 		/*
964 		 * Subtle thing, this is 32, not 33, because we will
965 		 * overwrite the thing at position 32 (which was just
966 		 * transmitted) with the new length.
967 		 */
968 		ssif_info->multi_pos = 32;
969 		ssif_info->data[0] = 32;
970 	} else {
971 		ssif_info->multi_data = NULL;
972 		command = SSIF_IPMI_REQUEST;
973 		ssif_info->data[0] = ssif_info->data_len;
974 	}
975 
976 	rv = ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE,
977 			  command, ssif_info->data, I2C_SMBUS_BLOCK_DATA);
978 	if (rv && (ssif_info->ssif_debug & SSIF_DEBUG_MSG))
979 		pr_info("Error from i2c_non_blocking_op(4)\n");
980 	return rv;
981 }
982 
983 static int start_send(struct ssif_info *ssif_info,
984 		      unsigned char   *data,
985 		      unsigned int    len)
986 {
987 	if (len > IPMI_MAX_MSG_LENGTH)
988 		return -E2BIG;
989 	if (len > ssif_info->max_xmit_msg_size)
990 		return -E2BIG;
991 
992 	ssif_info->retries_left = SSIF_SEND_RETRIES;
993 	memcpy(ssif_info->data + 1, data, len);
994 	ssif_info->data_len = len;
995 	return start_resend(ssif_info);
996 }
997 
998 /* Must be called with the message lock held. */
999 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags)
1000 {
1001 	struct ipmi_smi_msg *msg;
1002 	unsigned long oflags;
1003 
1004  restart:
1005 	if (!SSIF_IDLE(ssif_info)) {
1006 		ipmi_ssif_unlock_cond(ssif_info, flags);
1007 		return;
1008 	}
1009 
1010 	if (!ssif_info->waiting_msg) {
1011 		ssif_info->curr_msg = NULL;
1012 		ipmi_ssif_unlock_cond(ssif_info, flags);
1013 	} else {
1014 		int rv;
1015 
1016 		ssif_info->curr_msg = ssif_info->waiting_msg;
1017 		ssif_info->waiting_msg = NULL;
1018 		ipmi_ssif_unlock_cond(ssif_info, flags);
1019 		rv = start_send(ssif_info,
1020 				ssif_info->curr_msg->data,
1021 				ssif_info->curr_msg->data_size);
1022 		if (rv) {
1023 			msg = ssif_info->curr_msg;
1024 			ssif_info->curr_msg = NULL;
1025 			return_hosed_msg(ssif_info, msg);
1026 			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1027 			goto restart;
1028 		}
1029 	}
1030 }
1031 
1032 static void sender(void                *send_info,
1033 		   struct ipmi_smi_msg *msg)
1034 {
1035 	struct ssif_info *ssif_info = (struct ssif_info *) send_info;
1036 	unsigned long oflags, *flags;
1037 
1038 	BUG_ON(ssif_info->waiting_msg);
1039 	ssif_info->waiting_msg = msg;
1040 
1041 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1042 	start_next_msg(ssif_info, flags);
1043 
1044 	if (ssif_info->ssif_debug & SSIF_DEBUG_TIMING) {
1045 		struct timespec64 t;
1046 
1047 		ktime_get_real_ts64(&t);
1048 		pr_info("**Enqueue %02x %02x: %lld.%6.6ld\n",
1049 		       msg->data[0], msg->data[1],
1050 		       (long long) t.tv_sec, (long) t.tv_nsec / NSEC_PER_USEC);
1051 	}
1052 }
1053 
1054 static int get_smi_info(void *send_info, struct ipmi_smi_info *data)
1055 {
1056 	struct ssif_info *ssif_info = send_info;
1057 
1058 	data->addr_src = ssif_info->addr_source;
1059 	data->dev = &ssif_info->client->dev;
1060 	data->addr_info = ssif_info->addr_info;
1061 	get_device(data->dev);
1062 
1063 	return 0;
1064 }
1065 
1066 /*
1067  * Instead of having our own timer to periodically check the message
1068  * flags, we let the message handler drive us.
1069  */
1070 static void request_events(void *send_info)
1071 {
1072 	struct ssif_info *ssif_info = (struct ssif_info *) send_info;
1073 	unsigned long oflags, *flags;
1074 
1075 	if (!ssif_info->has_event_buffer)
1076 		return;
1077 
1078 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1079 	/*
1080 	 * Request flags first, not events, because the lower layer
1081 	 * doesn't have a way to send an attention.  But make sure
1082 	 * event checking still happens.
1083 	 */
1084 	ssif_info->req_events = true;
1085 	if (SSIF_IDLE(ssif_info))
1086 		start_flag_fetch(ssif_info, flags);
1087 	else {
1088 		ssif_info->req_flags = true;
1089 		ipmi_ssif_unlock_cond(ssif_info, flags);
1090 	}
1091 }
1092 
1093 static int inc_usecount(void *send_info)
1094 {
1095 	struct ssif_info *ssif_info = send_info;
1096 
1097 	if (!i2c_get_adapter(ssif_info->client->adapter->nr))
1098 		return -ENODEV;
1099 
1100 	i2c_use_client(ssif_info->client);
1101 	return 0;
1102 }
1103 
1104 static void dec_usecount(void *send_info)
1105 {
1106 	struct ssif_info *ssif_info = send_info;
1107 
1108 	i2c_release_client(ssif_info->client);
1109 	i2c_put_adapter(ssif_info->client->adapter);
1110 }
1111 
1112 static int ssif_start_processing(void *send_info,
1113 				 ipmi_smi_t intf)
1114 {
1115 	struct ssif_info *ssif_info = send_info;
1116 
1117 	ssif_info->intf = intf;
1118 
1119 	return 0;
1120 }
1121 
1122 #define MAX_SSIF_BMCS 4
1123 
1124 static unsigned short addr[MAX_SSIF_BMCS];
1125 static int num_addrs;
1126 module_param_array(addr, ushort, &num_addrs, 0);
1127 MODULE_PARM_DESC(addr, "The addresses to scan for IPMI BMCs on the SSIFs.");
1128 
1129 static char *adapter_name[MAX_SSIF_BMCS];
1130 static int num_adapter_names;
1131 module_param_array(adapter_name, charp, &num_adapter_names, 0);
1132 MODULE_PARM_DESC(adapter_name, "The string name of the I2C device that has the BMC.  By default all devices are scanned.");
1133 
1134 static int slave_addrs[MAX_SSIF_BMCS];
1135 static int num_slave_addrs;
1136 module_param_array(slave_addrs, int, &num_slave_addrs, 0);
1137 MODULE_PARM_DESC(slave_addrs,
1138 		 "The default IPMB slave address for the controller.");
1139 
1140 static bool alerts_broken;
1141 module_param(alerts_broken, bool, 0);
1142 MODULE_PARM_DESC(alerts_broken, "Don't enable alerts for the controller.");
1143 
1144 /*
1145  * Bit 0 enables message debugging, bit 1 enables state debugging, and
1146  * bit 2 enables timing debugging.  This is an array indexed by
1147  * interface number"
1148  */
1149 static int dbg[MAX_SSIF_BMCS];
1150 static int num_dbg;
1151 module_param_array(dbg, int, &num_dbg, 0);
1152 MODULE_PARM_DESC(dbg, "Turn on debugging.");
1153 
1154 static bool ssif_dbg_probe;
1155 module_param_named(dbg_probe, ssif_dbg_probe, bool, 0);
1156 MODULE_PARM_DESC(dbg_probe, "Enable debugging of probing of adapters.");
1157 
1158 static int use_thread;
1159 module_param(use_thread, int, 0);
1160 MODULE_PARM_DESC(use_thread, "Use the thread interface.");
1161 
1162 static bool ssif_tryacpi = true;
1163 module_param_named(tryacpi, ssif_tryacpi, bool, 0);
1164 MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the default scan of the interfaces identified via ACPI");
1165 
1166 static bool ssif_trydmi = true;
1167 module_param_named(trydmi, ssif_trydmi, bool, 0);
1168 MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the default scan of the interfaces identified via DMI (SMBIOS)");
1169 
1170 static DEFINE_MUTEX(ssif_infos_mutex);
1171 static LIST_HEAD(ssif_infos);
1172 
1173 static int ssif_remove(struct i2c_client *client)
1174 {
1175 	struct ssif_info *ssif_info = i2c_get_clientdata(client);
1176 	int rv;
1177 
1178 	if (!ssif_info)
1179 		return 0;
1180 
1181 	/*
1182 	 * After this point, we won't deliver anything asychronously
1183 	 * to the message handler.  We can unregister ourself.
1184 	 */
1185 	rv = ipmi_unregister_smi(ssif_info->intf);
1186 	if (rv) {
1187 		pr_err(PFX "Unable to unregister device: errno=%d\n", rv);
1188 		return rv;
1189 	}
1190 	ssif_info->intf = NULL;
1191 
1192 	/* make sure the driver is not looking for flags any more. */
1193 	while (ssif_info->ssif_state != SSIF_NORMAL)
1194 		schedule_timeout(1);
1195 
1196 	ssif_info->stopping = true;
1197 	del_timer_sync(&ssif_info->retry_timer);
1198 	if (ssif_info->thread) {
1199 		complete(&ssif_info->wake_thread);
1200 		kthread_stop(ssif_info->thread);
1201 	}
1202 
1203 	/*
1204 	 * No message can be outstanding now, we have removed the
1205 	 * upper layer and it permitted us to do so.
1206 	 */
1207 	kfree(ssif_info);
1208 	return 0;
1209 }
1210 
1211 static int do_cmd(struct i2c_client *client, int len, unsigned char *msg,
1212 		  int *resp_len, unsigned char *resp)
1213 {
1214 	int retry_cnt;
1215 	int ret;
1216 
1217 	retry_cnt = SSIF_SEND_RETRIES;
1218  retry1:
1219 	ret = i2c_smbus_write_block_data(client, SSIF_IPMI_REQUEST, len, msg);
1220 	if (ret) {
1221 		retry_cnt--;
1222 		if (retry_cnt > 0)
1223 			goto retry1;
1224 		return -ENODEV;
1225 	}
1226 
1227 	ret = -ENODEV;
1228 	retry_cnt = SSIF_RECV_RETRIES;
1229 	while (retry_cnt > 0) {
1230 		ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE,
1231 						resp);
1232 		if (ret > 0)
1233 			break;
1234 		msleep(SSIF_MSG_MSEC);
1235 		retry_cnt--;
1236 		if (retry_cnt <= 0)
1237 			break;
1238 	}
1239 
1240 	if (ret > 0) {
1241 		/* Validate that the response is correct. */
1242 		if (ret < 3 ||
1243 		    (resp[0] != (msg[0] | (1 << 2))) ||
1244 		    (resp[1] != msg[1]))
1245 			ret = -EINVAL;
1246 		else {
1247 			*resp_len = ret;
1248 			ret = 0;
1249 		}
1250 	}
1251 
1252 	return ret;
1253 }
1254 
1255 static int ssif_detect(struct i2c_client *client, struct i2c_board_info *info)
1256 {
1257 	unsigned char *resp;
1258 	unsigned char msg[3];
1259 	int           rv;
1260 	int           len;
1261 
1262 	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
1263 	if (!resp)
1264 		return -ENOMEM;
1265 
1266 	/* Do a Get Device ID command, since it is required. */
1267 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1268 	msg[1] = IPMI_GET_DEVICE_ID_CMD;
1269 	rv = do_cmd(client, 2, msg, &len, resp);
1270 	if (rv)
1271 		rv = -ENODEV;
1272 	else
1273 		strlcpy(info->type, DEVICE_NAME, I2C_NAME_SIZE);
1274 	kfree(resp);
1275 	return rv;
1276 }
1277 
1278 static int smi_type_proc_show(struct seq_file *m, void *v)
1279 {
1280 	seq_puts(m, "ssif\n");
1281 
1282 	return 0;
1283 }
1284 
1285 static int smi_type_proc_open(struct inode *inode, struct file *file)
1286 {
1287 	return single_open(file, smi_type_proc_show, inode->i_private);
1288 }
1289 
1290 static const struct file_operations smi_type_proc_ops = {
1291 	.open		= smi_type_proc_open,
1292 	.read		= seq_read,
1293 	.llseek		= seq_lseek,
1294 	.release	= single_release,
1295 };
1296 
1297 static int smi_stats_proc_show(struct seq_file *m, void *v)
1298 {
1299 	struct ssif_info *ssif_info = m->private;
1300 
1301 	seq_printf(m, "sent_messages:          %u\n",
1302 		   ssif_get_stat(ssif_info, sent_messages));
1303 	seq_printf(m, "sent_messages_parts:    %u\n",
1304 		   ssif_get_stat(ssif_info, sent_messages_parts));
1305 	seq_printf(m, "send_retries:           %u\n",
1306 		   ssif_get_stat(ssif_info, send_retries));
1307 	seq_printf(m, "send_errors:            %u\n",
1308 		   ssif_get_stat(ssif_info, send_errors));
1309 	seq_printf(m, "received_messages:      %u\n",
1310 		   ssif_get_stat(ssif_info, received_messages));
1311 	seq_printf(m, "received_message_parts: %u\n",
1312 		   ssif_get_stat(ssif_info, received_message_parts));
1313 	seq_printf(m, "receive_retries:        %u\n",
1314 		   ssif_get_stat(ssif_info, receive_retries));
1315 	seq_printf(m, "receive_errors:         %u\n",
1316 		   ssif_get_stat(ssif_info, receive_errors));
1317 	seq_printf(m, "flag_fetches:           %u\n",
1318 		   ssif_get_stat(ssif_info, flag_fetches));
1319 	seq_printf(m, "hosed:                  %u\n",
1320 		   ssif_get_stat(ssif_info, hosed));
1321 	seq_printf(m, "events:                 %u\n",
1322 		   ssif_get_stat(ssif_info, events));
1323 	seq_printf(m, "watchdog_pretimeouts:   %u\n",
1324 		   ssif_get_stat(ssif_info, watchdog_pretimeouts));
1325 	seq_printf(m, "alerts:                 %u\n",
1326 		   ssif_get_stat(ssif_info, alerts));
1327 	return 0;
1328 }
1329 
1330 static int smi_stats_proc_open(struct inode *inode, struct file *file)
1331 {
1332 	return single_open(file, smi_stats_proc_show, PDE_DATA(inode));
1333 }
1334 
1335 static const struct file_operations smi_stats_proc_ops = {
1336 	.open		= smi_stats_proc_open,
1337 	.read		= seq_read,
1338 	.llseek		= seq_lseek,
1339 	.release	= single_release,
1340 };
1341 
1342 static int strcmp_nospace(char *s1, char *s2)
1343 {
1344 	while (*s1 && *s2) {
1345 		while (isspace(*s1))
1346 			s1++;
1347 		while (isspace(*s2))
1348 			s2++;
1349 		if (*s1 > *s2)
1350 			return 1;
1351 		if (*s1 < *s2)
1352 			return -1;
1353 		s1++;
1354 		s2++;
1355 	}
1356 	return 0;
1357 }
1358 
1359 static struct ssif_addr_info *ssif_info_find(unsigned short addr,
1360 					     char *adapter_name,
1361 					     bool match_null_name)
1362 {
1363 	struct ssif_addr_info *info, *found = NULL;
1364 
1365 restart:
1366 	list_for_each_entry(info, &ssif_infos, link) {
1367 		if (info->binfo.addr == addr) {
1368 			if (info->adapter_name || adapter_name) {
1369 				if (!info->adapter_name != !adapter_name) {
1370 					/* One is NULL and one is not */
1371 					continue;
1372 				}
1373 				if (adapter_name &&
1374 				    strcmp_nospace(info->adapter_name,
1375 						   adapter_name))
1376 					/* Names do not match */
1377 					continue;
1378 			}
1379 			found = info;
1380 			break;
1381 		}
1382 	}
1383 
1384 	if (!found && match_null_name) {
1385 		/* Try to get an exact match first, then try with a NULL name */
1386 		adapter_name = NULL;
1387 		match_null_name = false;
1388 		goto restart;
1389 	}
1390 
1391 	return found;
1392 }
1393 
1394 static bool check_acpi(struct ssif_info *ssif_info, struct device *dev)
1395 {
1396 #ifdef CONFIG_ACPI
1397 	acpi_handle acpi_handle;
1398 
1399 	acpi_handle = ACPI_HANDLE(dev);
1400 	if (acpi_handle) {
1401 		ssif_info->addr_source = SI_ACPI;
1402 		ssif_info->addr_info.acpi_info.acpi_handle = acpi_handle;
1403 		return true;
1404 	}
1405 #endif
1406 	return false;
1407 }
1408 
1409 /*
1410  * Global enables we care about.
1411  */
1412 #define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \
1413 			     IPMI_BMC_EVT_MSG_INTR)
1414 
1415 static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
1416 {
1417 	unsigned char     msg[3];
1418 	unsigned char     *resp;
1419 	struct ssif_info   *ssif_info;
1420 	int               rv = 0;
1421 	int               len;
1422 	int               i;
1423 	u8		  slave_addr = 0;
1424 	struct ssif_addr_info *addr_info = NULL;
1425 
1426 
1427 	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
1428 	if (!resp)
1429 		return -ENOMEM;
1430 
1431 	ssif_info = kzalloc(sizeof(*ssif_info), GFP_KERNEL);
1432 	if (!ssif_info) {
1433 		kfree(resp);
1434 		return -ENOMEM;
1435 	}
1436 
1437 	if (!check_acpi(ssif_info, &client->dev)) {
1438 		addr_info = ssif_info_find(client->addr, client->adapter->name,
1439 					   true);
1440 		if (!addr_info) {
1441 			/* Must have come in through sysfs. */
1442 			ssif_info->addr_source = SI_HOTMOD;
1443 		} else {
1444 			ssif_info->addr_source = addr_info->addr_src;
1445 			ssif_info->ssif_debug = addr_info->debug;
1446 			ssif_info->addr_info = addr_info->addr_info;
1447 			slave_addr = addr_info->slave_addr;
1448 		}
1449 	}
1450 
1451 	pr_info(PFX "Trying %s-specified SSIF interface at i2c address 0x%x, adapter %s, slave address 0x%x\n",
1452 	       ipmi_addr_src_to_str(ssif_info->addr_source),
1453 	       client->addr, client->adapter->name, slave_addr);
1454 
1455 	/*
1456 	 * Do a Get Device ID command, since it comes back with some
1457 	 * useful info.
1458 	 */
1459 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1460 	msg[1] = IPMI_GET_DEVICE_ID_CMD;
1461 	rv = do_cmd(client, 2, msg, &len, resp);
1462 	if (rv)
1463 		goto out;
1464 
1465 	rv = ipmi_demangle_device_id(resp, len, &ssif_info->device_id);
1466 	if (rv)
1467 		goto out;
1468 
1469 	ssif_info->client = client;
1470 	i2c_set_clientdata(client, ssif_info);
1471 
1472 	/* Now check for system interface capabilities */
1473 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1474 	msg[1] = IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD;
1475 	msg[2] = 0; /* SSIF */
1476 	rv = do_cmd(client, 3, msg, &len, resp);
1477 	if (!rv && (len >= 3) && (resp[2] == 0)) {
1478 		if (len < 7) {
1479 			if (ssif_dbg_probe)
1480 				pr_info(PFX "SSIF info too short: %d\n", len);
1481 			goto no_support;
1482 		}
1483 
1484 		/* Got a good SSIF response, handle it. */
1485 		ssif_info->max_xmit_msg_size = resp[5];
1486 		ssif_info->max_recv_msg_size = resp[6];
1487 		ssif_info->multi_support = (resp[4] >> 6) & 0x3;
1488 		ssif_info->supports_pec = (resp[4] >> 3) & 0x1;
1489 
1490 		/* Sanitize the data */
1491 		switch (ssif_info->multi_support) {
1492 		case SSIF_NO_MULTI:
1493 			if (ssif_info->max_xmit_msg_size > 32)
1494 				ssif_info->max_xmit_msg_size = 32;
1495 			if (ssif_info->max_recv_msg_size > 32)
1496 				ssif_info->max_recv_msg_size = 32;
1497 			break;
1498 
1499 		case SSIF_MULTI_2_PART:
1500 			if (ssif_info->max_xmit_msg_size > 63)
1501 				ssif_info->max_xmit_msg_size = 63;
1502 			if (ssif_info->max_recv_msg_size > 62)
1503 				ssif_info->max_recv_msg_size = 62;
1504 			break;
1505 
1506 		case SSIF_MULTI_n_PART:
1507 			/*
1508 			 * The specification is rather confusing at
1509 			 * this point, but I think I understand what
1510 			 * is meant.  At least I have a workable
1511 			 * solution.  With multi-part messages, you
1512 			 * cannot send a message that is a multiple of
1513 			 * 32-bytes in length, because the start and
1514 			 * middle messages are 32-bytes and the end
1515 			 * message must be at least one byte.  You
1516 			 * can't fudge on an extra byte, that would
1517 			 * screw up things like fru data writes.  So
1518 			 * we limit the length to 63 bytes.  That way
1519 			 * a 32-byte message gets sent as a single
1520 			 * part.  A larger message will be a 32-byte
1521 			 * start and the next message is always going
1522 			 * to be 1-31 bytes in length.  Not ideal, but
1523 			 * it should work.
1524 			 */
1525 			if (ssif_info->max_xmit_msg_size > 63)
1526 				ssif_info->max_xmit_msg_size = 63;
1527 			break;
1528 
1529 		default:
1530 			/* Data is not sane, just give up. */
1531 			goto no_support;
1532 		}
1533 	} else {
1534  no_support:
1535 		/* Assume no multi-part or PEC support */
1536 		pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
1537 		       rv, len, resp[2]);
1538 
1539 		ssif_info->max_xmit_msg_size = 32;
1540 		ssif_info->max_recv_msg_size = 32;
1541 		ssif_info->multi_support = SSIF_NO_MULTI;
1542 		ssif_info->supports_pec = 0;
1543 	}
1544 
1545 	/* Make sure the NMI timeout is cleared. */
1546 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1547 	msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
1548 	msg[2] = WDT_PRE_TIMEOUT_INT;
1549 	rv = do_cmd(client, 3, msg, &len, resp);
1550 	if (rv || (len < 3) || (resp[2] != 0))
1551 		pr_warn(PFX "Unable to clear message flags: %d %d %2.2x\n",
1552 			rv, len, resp[2]);
1553 
1554 	/* Attempt to enable the event buffer. */
1555 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1556 	msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
1557 	rv = do_cmd(client, 2, msg, &len, resp);
1558 	if (rv || (len < 4) || (resp[2] != 0)) {
1559 		pr_warn(PFX "Error getting global enables: %d %d %2.2x\n",
1560 			rv, len, resp[2]);
1561 		rv = 0; /* Not fatal */
1562 		goto found;
1563 	}
1564 
1565 	ssif_info->global_enables = resp[3];
1566 
1567 	if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) {
1568 		ssif_info->has_event_buffer = true;
1569 		/* buffer is already enabled, nothing to do. */
1570 		goto found;
1571 	}
1572 
1573 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1574 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
1575 	msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF;
1576 	rv = do_cmd(client, 3, msg, &len, resp);
1577 	if (rv || (len < 2)) {
1578 		pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
1579 			rv, len, resp[2]);
1580 		rv = 0; /* Not fatal */
1581 		goto found;
1582 	}
1583 
1584 	if (resp[2] == 0) {
1585 		/* A successful return means the event buffer is supported. */
1586 		ssif_info->has_event_buffer = true;
1587 		ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF;
1588 	}
1589 
1590 	/* Some systems don't behave well if you enable alerts. */
1591 	if (alerts_broken)
1592 		goto found;
1593 
1594 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1595 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
1596 	msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR;
1597 	rv = do_cmd(client, 3, msg, &len, resp);
1598 	if (rv || (len < 2)) {
1599 		pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
1600 			rv, len, resp[2]);
1601 		rv = 0; /* Not fatal */
1602 		goto found;
1603 	}
1604 
1605 	if (resp[2] == 0) {
1606 		/* A successful return means the alert is supported. */
1607 		ssif_info->supports_alert = true;
1608 		ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR;
1609 	}
1610 
1611  found:
1612 	ssif_info->intf_num = atomic_inc_return(&next_intf);
1613 
1614 	if (ssif_dbg_probe) {
1615 		pr_info("ssif_probe: i2c_probe found device at i2c address %x\n",
1616 			client->addr);
1617 	}
1618 
1619 	spin_lock_init(&ssif_info->lock);
1620 	ssif_info->ssif_state = SSIF_NORMAL;
1621 	init_timer(&ssif_info->retry_timer);
1622 	ssif_info->retry_timer.data = (unsigned long) ssif_info;
1623 	ssif_info->retry_timer.function = retry_timeout;
1624 
1625 	for (i = 0; i < SSIF_NUM_STATS; i++)
1626 		atomic_set(&ssif_info->stats[i], 0);
1627 
1628 	if (ssif_info->supports_pec)
1629 		ssif_info->client->flags |= I2C_CLIENT_PEC;
1630 
1631 	ssif_info->handlers.owner = THIS_MODULE;
1632 	ssif_info->handlers.start_processing = ssif_start_processing;
1633 	ssif_info->handlers.get_smi_info = get_smi_info;
1634 	ssif_info->handlers.sender = sender;
1635 	ssif_info->handlers.request_events = request_events;
1636 	ssif_info->handlers.inc_usecount = inc_usecount;
1637 	ssif_info->handlers.dec_usecount = dec_usecount;
1638 
1639 	{
1640 		unsigned int thread_num;
1641 
1642 		thread_num = ((ssif_info->client->adapter->nr << 8) |
1643 			      ssif_info->client->addr);
1644 		init_completion(&ssif_info->wake_thread);
1645 		ssif_info->thread = kthread_run(ipmi_ssif_thread, ssif_info,
1646 					       "kssif%4.4x", thread_num);
1647 		if (IS_ERR(ssif_info->thread)) {
1648 			rv = PTR_ERR(ssif_info->thread);
1649 			dev_notice(&ssif_info->client->dev,
1650 				   "Could not start kernel thread: error %d\n",
1651 				   rv);
1652 			goto out;
1653 		}
1654 	}
1655 
1656 	rv = ipmi_register_smi(&ssif_info->handlers,
1657 			       ssif_info,
1658 			       &ssif_info->device_id,
1659 			       &ssif_info->client->dev,
1660 			       slave_addr);
1661 	 if (rv) {
1662 		pr_err(PFX "Unable to register device: error %d\n", rv);
1663 		goto out;
1664 	}
1665 
1666 	rv = ipmi_smi_add_proc_entry(ssif_info->intf, "type",
1667 				     &smi_type_proc_ops,
1668 				     ssif_info);
1669 	if (rv) {
1670 		pr_err(PFX "Unable to create proc entry: %d\n", rv);
1671 		goto out_err_unreg;
1672 	}
1673 
1674 	rv = ipmi_smi_add_proc_entry(ssif_info->intf, "ssif_stats",
1675 				     &smi_stats_proc_ops,
1676 				     ssif_info);
1677 	if (rv) {
1678 		pr_err(PFX "Unable to create proc entry: %d\n", rv);
1679 		goto out_err_unreg;
1680 	}
1681 
1682  out:
1683 	if (rv)
1684 		kfree(ssif_info);
1685 	kfree(resp);
1686 	return rv;
1687 
1688  out_err_unreg:
1689 	ipmi_unregister_smi(ssif_info->intf);
1690 	goto out;
1691 }
1692 
1693 static int ssif_adapter_handler(struct device *adev, void *opaque)
1694 {
1695 	struct ssif_addr_info *addr_info = opaque;
1696 
1697 	if (adev->type != &i2c_adapter_type)
1698 		return 0;
1699 
1700 	i2c_new_device(to_i2c_adapter(adev), &addr_info->binfo);
1701 
1702 	if (!addr_info->adapter_name)
1703 		return 1; /* Only try the first I2C adapter by default. */
1704 	return 0;
1705 }
1706 
1707 static int new_ssif_client(int addr, char *adapter_name,
1708 			   int debug, int slave_addr,
1709 			   enum ipmi_addr_src addr_src)
1710 {
1711 	struct ssif_addr_info *addr_info;
1712 	int rv = 0;
1713 
1714 	mutex_lock(&ssif_infos_mutex);
1715 	if (ssif_info_find(addr, adapter_name, false)) {
1716 		rv = -EEXIST;
1717 		goto out_unlock;
1718 	}
1719 
1720 	addr_info = kzalloc(sizeof(*addr_info), GFP_KERNEL);
1721 	if (!addr_info) {
1722 		rv = -ENOMEM;
1723 		goto out_unlock;
1724 	}
1725 
1726 	if (adapter_name) {
1727 		addr_info->adapter_name = kstrdup(adapter_name, GFP_KERNEL);
1728 		if (!addr_info->adapter_name) {
1729 			kfree(addr_info);
1730 			rv = -ENOMEM;
1731 			goto out_unlock;
1732 		}
1733 	}
1734 
1735 	strncpy(addr_info->binfo.type, DEVICE_NAME,
1736 		sizeof(addr_info->binfo.type));
1737 	addr_info->binfo.addr = addr;
1738 	addr_info->binfo.platform_data = addr_info;
1739 	addr_info->debug = debug;
1740 	addr_info->slave_addr = slave_addr;
1741 	addr_info->addr_src = addr_src;
1742 
1743 	list_add_tail(&addr_info->link, &ssif_infos);
1744 
1745 	if (initialized)
1746 		i2c_for_each_dev(addr_info, ssif_adapter_handler);
1747 	/* Otherwise address list will get it */
1748 
1749 out_unlock:
1750 	mutex_unlock(&ssif_infos_mutex);
1751 	return rv;
1752 }
1753 
1754 static void free_ssif_clients(void)
1755 {
1756 	struct ssif_addr_info *info, *tmp;
1757 
1758 	mutex_lock(&ssif_infos_mutex);
1759 	list_for_each_entry_safe(info, tmp, &ssif_infos, link) {
1760 		list_del(&info->link);
1761 		kfree(info->adapter_name);
1762 		kfree(info);
1763 	}
1764 	mutex_unlock(&ssif_infos_mutex);
1765 }
1766 
1767 static unsigned short *ssif_address_list(void)
1768 {
1769 	struct ssif_addr_info *info;
1770 	unsigned int count = 0, i;
1771 	unsigned short *address_list;
1772 
1773 	list_for_each_entry(info, &ssif_infos, link)
1774 		count++;
1775 
1776 	address_list = kzalloc(sizeof(*address_list) * (count + 1), GFP_KERNEL);
1777 	if (!address_list)
1778 		return NULL;
1779 
1780 	i = 0;
1781 	list_for_each_entry(info, &ssif_infos, link) {
1782 		unsigned short addr = info->binfo.addr;
1783 		int j;
1784 
1785 		for (j = 0; j < i; j++) {
1786 			if (address_list[j] == addr)
1787 				goto skip_addr;
1788 		}
1789 		address_list[i] = addr;
1790 skip_addr:
1791 		i++;
1792 	}
1793 	address_list[i] = I2C_CLIENT_END;
1794 
1795 	return address_list;
1796 }
1797 
1798 #ifdef CONFIG_ACPI
1799 static const struct acpi_device_id ssif_acpi_match[] = {
1800 	{ "IPI0001", 0 },
1801 	{ },
1802 };
1803 MODULE_DEVICE_TABLE(acpi, ssif_acpi_match);
1804 
1805 /*
1806  * Once we get an ACPI failure, we don't try any more, because we go
1807  * through the tables sequentially.  Once we don't find a table, there
1808  * are no more.
1809  */
1810 static int acpi_failure;
1811 
1812 /*
1813  * Defined in the IPMI 2.0 spec.
1814  */
1815 struct SPMITable {
1816 	s8	Signature[4];
1817 	u32	Length;
1818 	u8	Revision;
1819 	u8	Checksum;
1820 	s8	OEMID[6];
1821 	s8	OEMTableID[8];
1822 	s8	OEMRevision[4];
1823 	s8	CreatorID[4];
1824 	s8	CreatorRevision[4];
1825 	u8	InterfaceType;
1826 	u8	IPMIlegacy;
1827 	s16	SpecificationRevision;
1828 
1829 	/*
1830 	 * Bit 0 - SCI interrupt supported
1831 	 * Bit 1 - I/O APIC/SAPIC
1832 	 */
1833 	u8	InterruptType;
1834 
1835 	/*
1836 	 * If bit 0 of InterruptType is set, then this is the SCI
1837 	 * interrupt in the GPEx_STS register.
1838 	 */
1839 	u8	GPE;
1840 
1841 	s16	Reserved;
1842 
1843 	/*
1844 	 * If bit 1 of InterruptType is set, then this is the I/O
1845 	 * APIC/SAPIC interrupt.
1846 	 */
1847 	u32	GlobalSystemInterrupt;
1848 
1849 	/* The actual register address. */
1850 	struct acpi_generic_address addr;
1851 
1852 	u8	UID[4];
1853 
1854 	s8      spmi_id[1]; /* A '\0' terminated array starts here. */
1855 };
1856 
1857 static int try_init_spmi(struct SPMITable *spmi)
1858 {
1859 	unsigned short myaddr;
1860 
1861 	if (num_addrs >= MAX_SSIF_BMCS)
1862 		return -1;
1863 
1864 	if (spmi->IPMIlegacy != 1) {
1865 		pr_warn("IPMI: Bad SPMI legacy: %d\n", spmi->IPMIlegacy);
1866 		return -ENODEV;
1867 	}
1868 
1869 	if (spmi->InterfaceType != 4)
1870 		return -ENODEV;
1871 
1872 	if (spmi->addr.space_id != ACPI_ADR_SPACE_SMBUS) {
1873 		pr_warn(PFX "Invalid ACPI SSIF I/O Address type: %d\n",
1874 			spmi->addr.space_id);
1875 		return -EIO;
1876 	}
1877 
1878 	myaddr = spmi->addr.address >> 1;
1879 
1880 	return new_ssif_client(myaddr, NULL, 0, 0, SI_SPMI);
1881 }
1882 
1883 static void spmi_find_bmc(void)
1884 {
1885 	acpi_status      status;
1886 	struct SPMITable *spmi;
1887 	int              i;
1888 
1889 	if (acpi_disabled)
1890 		return;
1891 
1892 	if (acpi_failure)
1893 		return;
1894 
1895 	for (i = 0; ; i++) {
1896 		status = acpi_get_table(ACPI_SIG_SPMI, i+1,
1897 					(struct acpi_table_header **)&spmi);
1898 		if (status != AE_OK)
1899 			return;
1900 
1901 		try_init_spmi(spmi);
1902 	}
1903 }
1904 #else
1905 static void spmi_find_bmc(void) { }
1906 #endif
1907 
1908 #ifdef CONFIG_DMI
1909 static int decode_dmi(const struct dmi_device *dmi_dev)
1910 {
1911 	struct dmi_header *dm = dmi_dev->device_data;
1912 	u8             *data = (u8 *) dm;
1913 	u8             len = dm->length;
1914 	unsigned short myaddr;
1915 	int            slave_addr;
1916 
1917 	if (num_addrs >= MAX_SSIF_BMCS)
1918 		return -1;
1919 
1920 	if (len < 9)
1921 		return -1;
1922 
1923 	if (data[0x04] != 4) /* Not SSIF */
1924 		return -1;
1925 
1926 	if ((data[8] >> 1) == 0) {
1927 		/*
1928 		 * Some broken systems put the I2C address in
1929 		 * the slave address field.  We try to
1930 		 * accommodate them here.
1931 		 */
1932 		myaddr = data[6] >> 1;
1933 		slave_addr = 0;
1934 	} else {
1935 		myaddr = data[8] >> 1;
1936 		slave_addr = data[6];
1937 	}
1938 
1939 	return new_ssif_client(myaddr, NULL, 0, 0, SI_SMBIOS);
1940 }
1941 
1942 static void dmi_iterator(void)
1943 {
1944 	const struct dmi_device *dev = NULL;
1945 
1946 	while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev)))
1947 		decode_dmi(dev);
1948 }
1949 #else
1950 static void dmi_iterator(void) { }
1951 #endif
1952 
1953 static const struct i2c_device_id ssif_id[] = {
1954 	{ DEVICE_NAME, 0 },
1955 	{ }
1956 };
1957 MODULE_DEVICE_TABLE(i2c, ssif_id);
1958 
1959 static struct i2c_driver ssif_i2c_driver = {
1960 	.class		= I2C_CLASS_HWMON,
1961 	.driver		= {
1962 		.owner			= THIS_MODULE,
1963 		.name			= DEVICE_NAME
1964 	},
1965 	.probe		= ssif_probe,
1966 	.remove		= ssif_remove,
1967 	.alert		= ssif_alert,
1968 	.id_table	= ssif_id,
1969 	.detect		= ssif_detect
1970 };
1971 
1972 static int init_ipmi_ssif(void)
1973 {
1974 	int i;
1975 	int rv;
1976 
1977 	if (initialized)
1978 		return 0;
1979 
1980 	pr_info("IPMI SSIF Interface driver\n");
1981 
1982 	/* build list for i2c from addr list */
1983 	for (i = 0; i < num_addrs; i++) {
1984 		rv = new_ssif_client(addr[i], adapter_name[i],
1985 				     dbg[i], slave_addrs[i],
1986 				     SI_HARDCODED);
1987 		if (rv)
1988 			pr_err(PFX
1989 			       "Couldn't add hardcoded device at addr 0x%x\n",
1990 			       addr[i]);
1991 	}
1992 
1993 	if (ssif_tryacpi)
1994 		ssif_i2c_driver.driver.acpi_match_table	=
1995 			ACPI_PTR(ssif_acpi_match);
1996 	if (ssif_trydmi)
1997 		dmi_iterator();
1998 	if (ssif_tryacpi)
1999 		spmi_find_bmc();
2000 
2001 	ssif_i2c_driver.address_list = ssif_address_list();
2002 
2003 	rv = i2c_add_driver(&ssif_i2c_driver);
2004 	if (!rv)
2005 		initialized = true;
2006 
2007 	return rv;
2008 }
2009 module_init(init_ipmi_ssif);
2010 
2011 static void cleanup_ipmi_ssif(void)
2012 {
2013 	if (!initialized)
2014 		return;
2015 
2016 	initialized = false;
2017 
2018 	i2c_del_driver(&ssif_i2c_driver);
2019 
2020 	free_ssif_clients();
2021 }
2022 module_exit(cleanup_ipmi_ssif);
2023 
2024 MODULE_AUTHOR("Todd C Davis <todd.c.davis@intel.com>, Corey Minyard <minyard@acm.org>");
2025 MODULE_DESCRIPTION("IPMI driver for management controllers on a SMBus");
2026 MODULE_LICENSE("GPL");
2027