1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * ipmi_ssif.c 4 * 5 * The interface to the IPMI driver for SMBus access to a SMBus 6 * compliant device. Called SSIF by the IPMI spec. 7 * 8 * Author: Intel Corporation 9 * Todd Davis <todd.c.davis@intel.com> 10 * 11 * Rewritten by Corey Minyard <minyard@acm.org> to support the 12 * non-blocking I2C interface, add support for multi-part 13 * transactions, add PEC support, and general clenaup. 14 * 15 * Copyright 2003 Intel Corporation 16 * Copyright 2005 MontaVista Software 17 */ 18 19 /* 20 * This file holds the "policy" for the interface to the SSIF state 21 * machine. It does the configuration, handles timers and interrupts, 22 * and drives the real SSIF state machine. 23 */ 24 25 /* 26 * TODO: Figure out how to use SMB alerts. This will require a new 27 * interface into the I2C driver, I believe. 28 */ 29 30 #define pr_fmt(fmt) "ipmi_ssif: " fmt 31 #define dev_fmt(fmt) "ipmi_ssif: " fmt 32 33 #if defined(MODVERSIONS) 34 #include <linux/modversions.h> 35 #endif 36 37 #include <linux/module.h> 38 #include <linux/moduleparam.h> 39 #include <linux/sched.h> 40 #include <linux/seq_file.h> 41 #include <linux/timer.h> 42 #include <linux/delay.h> 43 #include <linux/errno.h> 44 #include <linux/spinlock.h> 45 #include <linux/slab.h> 46 #include <linux/list.h> 47 #include <linux/i2c.h> 48 #include <linux/ipmi_smi.h> 49 #include <linux/init.h> 50 #include <linux/dmi.h> 51 #include <linux/kthread.h> 52 #include <linux/acpi.h> 53 #include <linux/ctype.h> 54 #include <linux/time64.h> 55 #include "ipmi_dmi.h" 56 57 #define DEVICE_NAME "ipmi_ssif" 58 59 #define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD 0x57 60 61 #define SSIF_IPMI_REQUEST 2 62 #define SSIF_IPMI_MULTI_PART_REQUEST_START 6 63 #define SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE 7 64 #define SSIF_IPMI_MULTI_PART_REQUEST_END 8 65 #define SSIF_IPMI_RESPONSE 3 66 #define SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE 9 67 68 /* ssif_debug is a bit-field 69 * SSIF_DEBUG_MSG - commands and their responses 70 * SSIF_DEBUG_STATES - message states 71 * SSIF_DEBUG_TIMING - Measure times between events in the driver 72 */ 73 #define SSIF_DEBUG_TIMING 4 74 #define SSIF_DEBUG_STATE 2 75 #define SSIF_DEBUG_MSG 1 76 #define SSIF_NODEBUG 0 77 #define SSIF_DEFAULT_DEBUG (SSIF_NODEBUG) 78 79 /* 80 * Timer values 81 */ 82 #define SSIF_MSG_USEC 20000 /* 20ms between message tries. */ 83 #define SSIF_MSG_PART_USEC 5000 /* 5ms for a message part */ 84 85 /* How many times to we retry sending/receiving the message. */ 86 #define SSIF_SEND_RETRIES 5 87 #define SSIF_RECV_RETRIES 250 88 89 #define SSIF_MSG_MSEC (SSIF_MSG_USEC / 1000) 90 #define SSIF_MSG_JIFFIES ((SSIF_MSG_USEC * 1000) / TICK_NSEC) 91 #define SSIF_MSG_PART_JIFFIES ((SSIF_MSG_PART_USEC * 1000) / TICK_NSEC) 92 93 /* 94 * Timeout for the watch, only used for get flag timer. 95 */ 96 #define SSIF_WATCH_MSG_TIMEOUT msecs_to_jiffies(10) 97 #define SSIF_WATCH_WATCHDOG_TIMEOUT msecs_to_jiffies(250) 98 99 enum ssif_intf_state { 100 SSIF_NORMAL, 101 SSIF_GETTING_FLAGS, 102 SSIF_GETTING_EVENTS, 103 SSIF_CLEARING_FLAGS, 104 SSIF_GETTING_MESSAGES, 105 /* FIXME - add watchdog stuff. */ 106 }; 107 108 #define SSIF_IDLE(ssif) ((ssif)->ssif_state == SSIF_NORMAL \ 109 && (ssif)->curr_msg == NULL) 110 111 /* 112 * Indexes into stats[] in ssif_info below. 113 */ 114 enum ssif_stat_indexes { 115 /* Number of total messages sent. */ 116 SSIF_STAT_sent_messages = 0, 117 118 /* 119 * Number of message parts sent. Messages may be broken into 120 * parts if they are long. 121 */ 122 SSIF_STAT_sent_messages_parts, 123 124 /* 125 * Number of time a message was retried. 126 */ 127 SSIF_STAT_send_retries, 128 129 /* 130 * Number of times the send of a message failed. 131 */ 132 SSIF_STAT_send_errors, 133 134 /* 135 * Number of message responses received. 136 */ 137 SSIF_STAT_received_messages, 138 139 /* 140 * Number of message fragments received. 141 */ 142 SSIF_STAT_received_message_parts, 143 144 /* 145 * Number of times the receive of a message was retried. 146 */ 147 SSIF_STAT_receive_retries, 148 149 /* 150 * Number of errors receiving messages. 151 */ 152 SSIF_STAT_receive_errors, 153 154 /* 155 * Number of times a flag fetch was requested. 156 */ 157 SSIF_STAT_flag_fetches, 158 159 /* 160 * Number of times the hardware didn't follow the state machine. 161 */ 162 SSIF_STAT_hosed, 163 164 /* 165 * Number of received events. 166 */ 167 SSIF_STAT_events, 168 169 /* Number of asyncronous messages received. */ 170 SSIF_STAT_incoming_messages, 171 172 /* Number of watchdog pretimeouts. */ 173 SSIF_STAT_watchdog_pretimeouts, 174 175 /* Number of alers received. */ 176 SSIF_STAT_alerts, 177 178 /* Always add statistics before this value, it must be last. */ 179 SSIF_NUM_STATS 180 }; 181 182 struct ssif_addr_info { 183 struct i2c_board_info binfo; 184 char *adapter_name; 185 int debug; 186 int slave_addr; 187 enum ipmi_addr_src addr_src; 188 union ipmi_smi_info_union addr_info; 189 struct device *dev; 190 struct i2c_client *client; 191 192 struct mutex clients_mutex; 193 struct list_head clients; 194 195 struct list_head link; 196 }; 197 198 struct ssif_info; 199 200 typedef void (*ssif_i2c_done)(struct ssif_info *ssif_info, int result, 201 unsigned char *data, unsigned int len); 202 203 struct ssif_info { 204 struct ipmi_smi *intf; 205 spinlock_t lock; 206 struct ipmi_smi_msg *waiting_msg; 207 struct ipmi_smi_msg *curr_msg; 208 enum ssif_intf_state ssif_state; 209 unsigned long ssif_debug; 210 211 struct ipmi_smi_handlers handlers; 212 213 enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */ 214 union ipmi_smi_info_union addr_info; 215 216 /* 217 * Flags from the last GET_MSG_FLAGS command, used when an ATTN 218 * is set to hold the flags until we are done handling everything 219 * from the flags. 220 */ 221 #define RECEIVE_MSG_AVAIL 0x01 222 #define EVENT_MSG_BUFFER_FULL 0x02 223 #define WDT_PRE_TIMEOUT_INT 0x08 224 unsigned char msg_flags; 225 226 u8 global_enables; 227 bool has_event_buffer; 228 bool supports_alert; 229 230 /* 231 * Used to tell what we should do with alerts. If we are 232 * waiting on a response, read the data immediately. 233 */ 234 bool got_alert; 235 bool waiting_alert; 236 237 /* 238 * If set to true, this will request events the next time the 239 * state machine is idle. 240 */ 241 bool req_events; 242 243 /* 244 * If set to true, this will request flags the next time the 245 * state machine is idle. 246 */ 247 bool req_flags; 248 249 /* 250 * Used to perform timer operations when run-to-completion 251 * mode is on. This is a countdown timer. 252 */ 253 int rtc_us_timer; 254 255 /* Used for sending/receiving data. +1 for the length. */ 256 unsigned char data[IPMI_MAX_MSG_LENGTH + 1]; 257 unsigned int data_len; 258 259 /* Temp receive buffer, gets copied into data. */ 260 unsigned char recv[I2C_SMBUS_BLOCK_MAX]; 261 262 struct i2c_client *client; 263 ssif_i2c_done done_handler; 264 265 /* Thread interface handling */ 266 struct task_struct *thread; 267 struct completion wake_thread; 268 bool stopping; 269 int i2c_read_write; 270 int i2c_command; 271 unsigned char *i2c_data; 272 unsigned int i2c_size; 273 274 struct timer_list retry_timer; 275 int retries_left; 276 277 long watch_timeout; /* Timeout for flags check, 0 if off. */ 278 struct timer_list watch_timer; /* Flag fetch timer. */ 279 280 /* Info from SSIF cmd */ 281 unsigned char max_xmit_msg_size; 282 unsigned char max_recv_msg_size; 283 bool cmd8_works; /* See test_multipart_messages() for details. */ 284 unsigned int multi_support; 285 int supports_pec; 286 287 #define SSIF_NO_MULTI 0 288 #define SSIF_MULTI_2_PART 1 289 #define SSIF_MULTI_n_PART 2 290 unsigned char *multi_data; 291 unsigned int multi_len; 292 unsigned int multi_pos; 293 294 atomic_t stats[SSIF_NUM_STATS]; 295 }; 296 297 #define ssif_inc_stat(ssif, stat) \ 298 atomic_inc(&(ssif)->stats[SSIF_STAT_ ## stat]) 299 #define ssif_get_stat(ssif, stat) \ 300 ((unsigned int) atomic_read(&(ssif)->stats[SSIF_STAT_ ## stat])) 301 302 static bool initialized; 303 static bool platform_registered; 304 305 static void return_hosed_msg(struct ssif_info *ssif_info, 306 struct ipmi_smi_msg *msg); 307 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags); 308 static int start_send(struct ssif_info *ssif_info, 309 unsigned char *data, 310 unsigned int len); 311 312 static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info, 313 unsigned long *flags) 314 __acquires(&ssif_info->lock) 315 { 316 spin_lock_irqsave(&ssif_info->lock, *flags); 317 return flags; 318 } 319 320 static void ipmi_ssif_unlock_cond(struct ssif_info *ssif_info, 321 unsigned long *flags) 322 __releases(&ssif_info->lock) 323 { 324 spin_unlock_irqrestore(&ssif_info->lock, *flags); 325 } 326 327 static void deliver_recv_msg(struct ssif_info *ssif_info, 328 struct ipmi_smi_msg *msg) 329 { 330 if (msg->rsp_size < 0) { 331 return_hosed_msg(ssif_info, msg); 332 dev_err(&ssif_info->client->dev, 333 "%s: Malformed message: rsp_size = %d\n", 334 __func__, msg->rsp_size); 335 } else { 336 ipmi_smi_msg_received(ssif_info->intf, msg); 337 } 338 } 339 340 static void return_hosed_msg(struct ssif_info *ssif_info, 341 struct ipmi_smi_msg *msg) 342 { 343 ssif_inc_stat(ssif_info, hosed); 344 345 /* Make it a response */ 346 msg->rsp[0] = msg->data[0] | 4; 347 msg->rsp[1] = msg->data[1]; 348 msg->rsp[2] = 0xFF; /* Unknown error. */ 349 msg->rsp_size = 3; 350 351 deliver_recv_msg(ssif_info, msg); 352 } 353 354 /* 355 * Must be called with the message lock held. This will release the 356 * message lock. Note that the caller will check SSIF_IDLE and start a 357 * new operation, so there is no need to check for new messages to 358 * start in here. 359 */ 360 static void start_clear_flags(struct ssif_info *ssif_info, unsigned long *flags) 361 { 362 unsigned char msg[3]; 363 364 ssif_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT; 365 ssif_info->ssif_state = SSIF_CLEARING_FLAGS; 366 ipmi_ssif_unlock_cond(ssif_info, flags); 367 368 /* Make sure the watchdog pre-timeout flag is not set at startup. */ 369 msg[0] = (IPMI_NETFN_APP_REQUEST << 2); 370 msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; 371 msg[2] = WDT_PRE_TIMEOUT_INT; 372 373 if (start_send(ssif_info, msg, 3) != 0) { 374 /* Error, just go to normal state. */ 375 ssif_info->ssif_state = SSIF_NORMAL; 376 } 377 } 378 379 static void start_flag_fetch(struct ssif_info *ssif_info, unsigned long *flags) 380 { 381 unsigned char mb[2]; 382 383 ssif_info->req_flags = false; 384 ssif_info->ssif_state = SSIF_GETTING_FLAGS; 385 ipmi_ssif_unlock_cond(ssif_info, flags); 386 387 mb[0] = (IPMI_NETFN_APP_REQUEST << 2); 388 mb[1] = IPMI_GET_MSG_FLAGS_CMD; 389 if (start_send(ssif_info, mb, 2) != 0) 390 ssif_info->ssif_state = SSIF_NORMAL; 391 } 392 393 static void check_start_send(struct ssif_info *ssif_info, unsigned long *flags, 394 struct ipmi_smi_msg *msg) 395 { 396 if (start_send(ssif_info, msg->data, msg->data_size) != 0) { 397 unsigned long oflags; 398 399 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 400 ssif_info->curr_msg = NULL; 401 ssif_info->ssif_state = SSIF_NORMAL; 402 ipmi_ssif_unlock_cond(ssif_info, flags); 403 ipmi_free_smi_msg(msg); 404 } 405 } 406 407 static void start_event_fetch(struct ssif_info *ssif_info, unsigned long *flags) 408 { 409 struct ipmi_smi_msg *msg; 410 411 ssif_info->req_events = false; 412 413 msg = ipmi_alloc_smi_msg(); 414 if (!msg) { 415 ssif_info->ssif_state = SSIF_NORMAL; 416 ipmi_ssif_unlock_cond(ssif_info, flags); 417 return; 418 } 419 420 ssif_info->curr_msg = msg; 421 ssif_info->ssif_state = SSIF_GETTING_EVENTS; 422 ipmi_ssif_unlock_cond(ssif_info, flags); 423 424 msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); 425 msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD; 426 msg->data_size = 2; 427 428 check_start_send(ssif_info, flags, msg); 429 } 430 431 static void start_recv_msg_fetch(struct ssif_info *ssif_info, 432 unsigned long *flags) 433 { 434 struct ipmi_smi_msg *msg; 435 436 msg = ipmi_alloc_smi_msg(); 437 if (!msg) { 438 ssif_info->ssif_state = SSIF_NORMAL; 439 ipmi_ssif_unlock_cond(ssif_info, flags); 440 return; 441 } 442 443 ssif_info->curr_msg = msg; 444 ssif_info->ssif_state = SSIF_GETTING_MESSAGES; 445 ipmi_ssif_unlock_cond(ssif_info, flags); 446 447 msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); 448 msg->data[1] = IPMI_GET_MSG_CMD; 449 msg->data_size = 2; 450 451 check_start_send(ssif_info, flags, msg); 452 } 453 454 /* 455 * Must be called with the message lock held. This will release the 456 * message lock. Note that the caller will check SSIF_IDLE and start a 457 * new operation, so there is no need to check for new messages to 458 * start in here. 459 */ 460 static void handle_flags(struct ssif_info *ssif_info, unsigned long *flags) 461 { 462 if (ssif_info->msg_flags & WDT_PRE_TIMEOUT_INT) { 463 /* Watchdog pre-timeout */ 464 ssif_inc_stat(ssif_info, watchdog_pretimeouts); 465 start_clear_flags(ssif_info, flags); 466 ipmi_smi_watchdog_pretimeout(ssif_info->intf); 467 } else if (ssif_info->msg_flags & RECEIVE_MSG_AVAIL) 468 /* Messages available. */ 469 start_recv_msg_fetch(ssif_info, flags); 470 else if (ssif_info->msg_flags & EVENT_MSG_BUFFER_FULL) 471 /* Events available. */ 472 start_event_fetch(ssif_info, flags); 473 else { 474 ssif_info->ssif_state = SSIF_NORMAL; 475 ipmi_ssif_unlock_cond(ssif_info, flags); 476 } 477 } 478 479 static int ipmi_ssif_thread(void *data) 480 { 481 struct ssif_info *ssif_info = data; 482 483 while (!kthread_should_stop()) { 484 int result; 485 486 /* Wait for something to do */ 487 result = wait_for_completion_interruptible( 488 &ssif_info->wake_thread); 489 if (ssif_info->stopping) 490 break; 491 if (result == -ERESTARTSYS) 492 continue; 493 init_completion(&ssif_info->wake_thread); 494 495 if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) { 496 result = i2c_smbus_write_block_data( 497 ssif_info->client, ssif_info->i2c_command, 498 ssif_info->i2c_data[0], 499 ssif_info->i2c_data + 1); 500 ssif_info->done_handler(ssif_info, result, NULL, 0); 501 } else { 502 result = i2c_smbus_read_block_data( 503 ssif_info->client, ssif_info->i2c_command, 504 ssif_info->i2c_data); 505 if (result < 0) 506 ssif_info->done_handler(ssif_info, result, 507 NULL, 0); 508 else 509 ssif_info->done_handler(ssif_info, 0, 510 ssif_info->i2c_data, 511 result); 512 } 513 } 514 515 return 0; 516 } 517 518 static int ssif_i2c_send(struct ssif_info *ssif_info, 519 ssif_i2c_done handler, 520 int read_write, int command, 521 unsigned char *data, unsigned int size) 522 { 523 ssif_info->done_handler = handler; 524 525 ssif_info->i2c_read_write = read_write; 526 ssif_info->i2c_command = command; 527 ssif_info->i2c_data = data; 528 ssif_info->i2c_size = size; 529 complete(&ssif_info->wake_thread); 530 return 0; 531 } 532 533 534 static void msg_done_handler(struct ssif_info *ssif_info, int result, 535 unsigned char *data, unsigned int len); 536 537 static void start_get(struct ssif_info *ssif_info) 538 { 539 int rv; 540 541 ssif_info->rtc_us_timer = 0; 542 ssif_info->multi_pos = 0; 543 544 rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, 545 SSIF_IPMI_RESPONSE, 546 ssif_info->recv, I2C_SMBUS_BLOCK_DATA); 547 if (rv < 0) { 548 /* request failed, just return the error. */ 549 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 550 dev_dbg(&ssif_info->client->dev, 551 "Error from i2c_non_blocking_op(5)\n"); 552 553 msg_done_handler(ssif_info, -EIO, NULL, 0); 554 } 555 } 556 557 static void retry_timeout(struct timer_list *t) 558 { 559 struct ssif_info *ssif_info = from_timer(ssif_info, t, retry_timer); 560 unsigned long oflags, *flags; 561 bool waiting; 562 563 if (ssif_info->stopping) 564 return; 565 566 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 567 waiting = ssif_info->waiting_alert; 568 ssif_info->waiting_alert = false; 569 ipmi_ssif_unlock_cond(ssif_info, flags); 570 571 if (waiting) 572 start_get(ssif_info); 573 } 574 575 static void watch_timeout(struct timer_list *t) 576 { 577 struct ssif_info *ssif_info = from_timer(ssif_info, t, watch_timer); 578 unsigned long oflags, *flags; 579 580 if (ssif_info->stopping) 581 return; 582 583 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 584 if (ssif_info->watch_timeout) { 585 mod_timer(&ssif_info->watch_timer, 586 jiffies + ssif_info->watch_timeout); 587 if (SSIF_IDLE(ssif_info)) { 588 start_flag_fetch(ssif_info, flags); /* Releases lock */ 589 return; 590 } 591 ssif_info->req_flags = true; 592 } 593 ipmi_ssif_unlock_cond(ssif_info, flags); 594 } 595 596 static void ssif_alert(struct i2c_client *client, enum i2c_alert_protocol type, 597 unsigned int data) 598 { 599 struct ssif_info *ssif_info = i2c_get_clientdata(client); 600 unsigned long oflags, *flags; 601 bool do_get = false; 602 603 if (type != I2C_PROTOCOL_SMBUS_ALERT) 604 return; 605 606 ssif_inc_stat(ssif_info, alerts); 607 608 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 609 if (ssif_info->waiting_alert) { 610 ssif_info->waiting_alert = false; 611 del_timer(&ssif_info->retry_timer); 612 do_get = true; 613 } else if (ssif_info->curr_msg) { 614 ssif_info->got_alert = true; 615 } 616 ipmi_ssif_unlock_cond(ssif_info, flags); 617 if (do_get) 618 start_get(ssif_info); 619 } 620 621 static int start_resend(struct ssif_info *ssif_info); 622 623 static void msg_done_handler(struct ssif_info *ssif_info, int result, 624 unsigned char *data, unsigned int len) 625 { 626 struct ipmi_smi_msg *msg; 627 unsigned long oflags, *flags; 628 int rv; 629 630 /* 631 * We are single-threaded here, so no need for a lock until we 632 * start messing with driver states or the queues. 633 */ 634 635 if (result < 0) { 636 ssif_info->retries_left--; 637 if (ssif_info->retries_left > 0) { 638 ssif_inc_stat(ssif_info, receive_retries); 639 640 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 641 ssif_info->waiting_alert = true; 642 ssif_info->rtc_us_timer = SSIF_MSG_USEC; 643 if (!ssif_info->stopping) 644 mod_timer(&ssif_info->retry_timer, 645 jiffies + SSIF_MSG_JIFFIES); 646 ipmi_ssif_unlock_cond(ssif_info, flags); 647 return; 648 } 649 650 ssif_inc_stat(ssif_info, receive_errors); 651 652 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 653 dev_dbg(&ssif_info->client->dev, 654 "%s: Error %d\n", __func__, result); 655 len = 0; 656 goto continue_op; 657 } 658 659 if ((len > 1) && (ssif_info->multi_pos == 0) 660 && (data[0] == 0x00) && (data[1] == 0x01)) { 661 /* Start of multi-part read. Start the next transaction. */ 662 int i; 663 664 ssif_inc_stat(ssif_info, received_message_parts); 665 666 /* Remove the multi-part read marker. */ 667 len -= 2; 668 data += 2; 669 for (i = 0; i < len; i++) 670 ssif_info->data[i] = data[i]; 671 ssif_info->multi_len = len; 672 ssif_info->multi_pos = 1; 673 674 rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, 675 SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, 676 ssif_info->recv, I2C_SMBUS_BLOCK_DATA); 677 if (rv < 0) { 678 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 679 dev_dbg(&ssif_info->client->dev, 680 "Error from i2c_non_blocking_op(1)\n"); 681 682 result = -EIO; 683 } else 684 return; 685 } else if (ssif_info->multi_pos) { 686 /* Middle of multi-part read. Start the next transaction. */ 687 int i; 688 unsigned char blocknum; 689 690 if (len == 0) { 691 result = -EIO; 692 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 693 dev_dbg(&ssif_info->client->dev, 694 "Middle message with no data\n"); 695 696 goto continue_op; 697 } 698 699 blocknum = data[0]; 700 len--; 701 data++; 702 703 if (blocknum != 0xff && len != 31) { 704 /* All blocks but the last must have 31 data bytes. */ 705 result = -EIO; 706 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 707 dev_dbg(&ssif_info->client->dev, 708 "Received middle message <31\n"); 709 710 goto continue_op; 711 } 712 713 if (ssif_info->multi_len + len > IPMI_MAX_MSG_LENGTH) { 714 /* Received message too big, abort the operation. */ 715 result = -E2BIG; 716 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 717 dev_dbg(&ssif_info->client->dev, 718 "Received message too big\n"); 719 720 goto continue_op; 721 } 722 723 for (i = 0; i < len; i++) 724 ssif_info->data[i + ssif_info->multi_len] = data[i]; 725 ssif_info->multi_len += len; 726 if (blocknum == 0xff) { 727 /* End of read */ 728 len = ssif_info->multi_len; 729 data = ssif_info->data; 730 } else if (blocknum + 1 != ssif_info->multi_pos) { 731 /* 732 * Out of sequence block, just abort. Block 733 * numbers start at zero for the second block, 734 * but multi_pos starts at one, so the +1. 735 */ 736 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 737 dev_dbg(&ssif_info->client->dev, 738 "Received message out of sequence, expected %u, got %u\n", 739 ssif_info->multi_pos - 1, blocknum); 740 result = -EIO; 741 } else { 742 ssif_inc_stat(ssif_info, received_message_parts); 743 744 ssif_info->multi_pos++; 745 746 rv = ssif_i2c_send(ssif_info, msg_done_handler, 747 I2C_SMBUS_READ, 748 SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, 749 ssif_info->recv, 750 I2C_SMBUS_BLOCK_DATA); 751 if (rv < 0) { 752 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 753 dev_dbg(&ssif_info->client->dev, 754 "Error from ssif_i2c_send\n"); 755 756 result = -EIO; 757 } else 758 return; 759 } 760 } 761 762 continue_op: 763 if (result < 0) { 764 ssif_inc_stat(ssif_info, receive_errors); 765 } else { 766 ssif_inc_stat(ssif_info, received_messages); 767 ssif_inc_stat(ssif_info, received_message_parts); 768 } 769 770 if (ssif_info->ssif_debug & SSIF_DEBUG_STATE) 771 dev_dbg(&ssif_info->client->dev, 772 "DONE 1: state = %d, result=%d\n", 773 ssif_info->ssif_state, result); 774 775 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 776 msg = ssif_info->curr_msg; 777 if (msg) { 778 if (data) { 779 if (len > IPMI_MAX_MSG_LENGTH) 780 len = IPMI_MAX_MSG_LENGTH; 781 memcpy(msg->rsp, data, len); 782 } else { 783 len = 0; 784 } 785 msg->rsp_size = len; 786 ssif_info->curr_msg = NULL; 787 } 788 789 switch (ssif_info->ssif_state) { 790 case SSIF_NORMAL: 791 ipmi_ssif_unlock_cond(ssif_info, flags); 792 if (!msg) 793 break; 794 795 if (result < 0) 796 return_hosed_msg(ssif_info, msg); 797 else 798 deliver_recv_msg(ssif_info, msg); 799 break; 800 801 case SSIF_GETTING_FLAGS: 802 /* We got the flags from the SSIF, now handle them. */ 803 if ((result < 0) || (len < 4) || (data[2] != 0)) { 804 /* 805 * Error fetching flags, or invalid length, 806 * just give up for now. 807 */ 808 ssif_info->ssif_state = SSIF_NORMAL; 809 ipmi_ssif_unlock_cond(ssif_info, flags); 810 dev_warn(&ssif_info->client->dev, 811 "Error getting flags: %d %d, %x\n", 812 result, len, (len >= 3) ? data[2] : 0); 813 } else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 814 || data[1] != IPMI_GET_MSG_FLAGS_CMD) { 815 /* 816 * Don't abort here, maybe it was a queued 817 * response to a previous command. 818 */ 819 ipmi_ssif_unlock_cond(ssif_info, flags); 820 dev_warn(&ssif_info->client->dev, 821 "Invalid response getting flags: %x %x\n", 822 data[0], data[1]); 823 } else { 824 ssif_inc_stat(ssif_info, flag_fetches); 825 ssif_info->msg_flags = data[3]; 826 handle_flags(ssif_info, flags); 827 } 828 break; 829 830 case SSIF_CLEARING_FLAGS: 831 /* We cleared the flags. */ 832 if ((result < 0) || (len < 3) || (data[2] != 0)) { 833 /* Error clearing flags */ 834 dev_warn(&ssif_info->client->dev, 835 "Error clearing flags: %d %d, %x\n", 836 result, len, (len >= 3) ? data[2] : 0); 837 } else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 838 || data[1] != IPMI_CLEAR_MSG_FLAGS_CMD) { 839 dev_warn(&ssif_info->client->dev, 840 "Invalid response clearing flags: %x %x\n", 841 data[0], data[1]); 842 } 843 ssif_info->ssif_state = SSIF_NORMAL; 844 ipmi_ssif_unlock_cond(ssif_info, flags); 845 break; 846 847 case SSIF_GETTING_EVENTS: 848 if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { 849 /* Error getting event, probably done. */ 850 msg->done(msg); 851 852 /* Take off the event flag. */ 853 ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; 854 handle_flags(ssif_info, flags); 855 } else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 856 || msg->rsp[1] != IPMI_READ_EVENT_MSG_BUFFER_CMD) { 857 dev_warn(&ssif_info->client->dev, 858 "Invalid response getting events: %x %x\n", 859 msg->rsp[0], msg->rsp[1]); 860 msg->done(msg); 861 /* Take off the event flag. */ 862 ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; 863 handle_flags(ssif_info, flags); 864 } else { 865 handle_flags(ssif_info, flags); 866 ssif_inc_stat(ssif_info, events); 867 deliver_recv_msg(ssif_info, msg); 868 } 869 break; 870 871 case SSIF_GETTING_MESSAGES: 872 if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { 873 /* Error getting event, probably done. */ 874 msg->done(msg); 875 876 /* Take off the msg flag. */ 877 ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL; 878 handle_flags(ssif_info, flags); 879 } else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 880 || msg->rsp[1] != IPMI_GET_MSG_CMD) { 881 dev_warn(&ssif_info->client->dev, 882 "Invalid response clearing flags: %x %x\n", 883 msg->rsp[0], msg->rsp[1]); 884 msg->done(msg); 885 886 /* Take off the msg flag. */ 887 ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL; 888 handle_flags(ssif_info, flags); 889 } else { 890 ssif_inc_stat(ssif_info, incoming_messages); 891 handle_flags(ssif_info, flags); 892 deliver_recv_msg(ssif_info, msg); 893 } 894 break; 895 } 896 897 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 898 if (SSIF_IDLE(ssif_info) && !ssif_info->stopping) { 899 if (ssif_info->req_events) 900 start_event_fetch(ssif_info, flags); 901 else if (ssif_info->req_flags) 902 start_flag_fetch(ssif_info, flags); 903 else 904 start_next_msg(ssif_info, flags); 905 } else 906 ipmi_ssif_unlock_cond(ssif_info, flags); 907 908 if (ssif_info->ssif_debug & SSIF_DEBUG_STATE) 909 dev_dbg(&ssif_info->client->dev, 910 "DONE 2: state = %d.\n", ssif_info->ssif_state); 911 } 912 913 static void msg_written_handler(struct ssif_info *ssif_info, int result, 914 unsigned char *data, unsigned int len) 915 { 916 int rv; 917 918 /* We are single-threaded here, so no need for a lock. */ 919 if (result < 0) { 920 ssif_info->retries_left--; 921 if (ssif_info->retries_left > 0) { 922 if (!start_resend(ssif_info)) { 923 ssif_inc_stat(ssif_info, send_retries); 924 return; 925 } 926 /* request failed, just return the error. */ 927 ssif_inc_stat(ssif_info, send_errors); 928 929 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 930 dev_dbg(&ssif_info->client->dev, 931 "%s: Out of retries\n", __func__); 932 msg_done_handler(ssif_info, -EIO, NULL, 0); 933 return; 934 } 935 936 ssif_inc_stat(ssif_info, send_errors); 937 938 /* 939 * Got an error on transmit, let the done routine 940 * handle it. 941 */ 942 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 943 dev_dbg(&ssif_info->client->dev, 944 "%s: Error %d\n", __func__, result); 945 946 msg_done_handler(ssif_info, result, NULL, 0); 947 return; 948 } 949 950 if (ssif_info->multi_data) { 951 /* 952 * In the middle of a multi-data write. See the comment 953 * in the SSIF_MULTI_n_PART case in the probe function 954 * for details on the intricacies of this. 955 */ 956 int left, to_write; 957 unsigned char *data_to_send; 958 unsigned char cmd; 959 960 ssif_inc_stat(ssif_info, sent_messages_parts); 961 962 left = ssif_info->multi_len - ssif_info->multi_pos; 963 to_write = left; 964 if (to_write > 32) 965 to_write = 32; 966 /* Length byte. */ 967 ssif_info->multi_data[ssif_info->multi_pos] = to_write; 968 data_to_send = ssif_info->multi_data + ssif_info->multi_pos; 969 ssif_info->multi_pos += to_write; 970 cmd = SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE; 971 if (ssif_info->cmd8_works) { 972 if (left == to_write) { 973 cmd = SSIF_IPMI_MULTI_PART_REQUEST_END; 974 ssif_info->multi_data = NULL; 975 } 976 } else if (to_write < 32) { 977 ssif_info->multi_data = NULL; 978 } 979 980 rv = ssif_i2c_send(ssif_info, msg_written_handler, 981 I2C_SMBUS_WRITE, cmd, 982 data_to_send, I2C_SMBUS_BLOCK_DATA); 983 if (rv < 0) { 984 /* request failed, just return the error. */ 985 ssif_inc_stat(ssif_info, send_errors); 986 987 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 988 dev_dbg(&ssif_info->client->dev, 989 "Error from i2c_non_blocking_op(3)\n"); 990 msg_done_handler(ssif_info, -EIO, NULL, 0); 991 } 992 } else { 993 /* Ready to request the result. */ 994 unsigned long oflags, *flags; 995 996 ssif_inc_stat(ssif_info, sent_messages); 997 ssif_inc_stat(ssif_info, sent_messages_parts); 998 999 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1000 if (ssif_info->got_alert) { 1001 /* The result is already ready, just start it. */ 1002 ssif_info->got_alert = false; 1003 ipmi_ssif_unlock_cond(ssif_info, flags); 1004 start_get(ssif_info); 1005 } else { 1006 /* Wait a jiffie then request the next message */ 1007 ssif_info->waiting_alert = true; 1008 ssif_info->retries_left = SSIF_RECV_RETRIES; 1009 ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC; 1010 if (!ssif_info->stopping) 1011 mod_timer(&ssif_info->retry_timer, 1012 jiffies + SSIF_MSG_PART_JIFFIES); 1013 ipmi_ssif_unlock_cond(ssif_info, flags); 1014 } 1015 } 1016 } 1017 1018 static int start_resend(struct ssif_info *ssif_info) 1019 { 1020 int rv; 1021 int command; 1022 1023 ssif_info->got_alert = false; 1024 1025 if (ssif_info->data_len > 32) { 1026 command = SSIF_IPMI_MULTI_PART_REQUEST_START; 1027 ssif_info->multi_data = ssif_info->data; 1028 ssif_info->multi_len = ssif_info->data_len; 1029 /* 1030 * Subtle thing, this is 32, not 33, because we will 1031 * overwrite the thing at position 32 (which was just 1032 * transmitted) with the new length. 1033 */ 1034 ssif_info->multi_pos = 32; 1035 ssif_info->data[0] = 32; 1036 } else { 1037 ssif_info->multi_data = NULL; 1038 command = SSIF_IPMI_REQUEST; 1039 ssif_info->data[0] = ssif_info->data_len; 1040 } 1041 1042 rv = ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE, 1043 command, ssif_info->data, I2C_SMBUS_BLOCK_DATA); 1044 if (rv && (ssif_info->ssif_debug & SSIF_DEBUG_MSG)) 1045 dev_dbg(&ssif_info->client->dev, 1046 "Error from i2c_non_blocking_op(4)\n"); 1047 return rv; 1048 } 1049 1050 static int start_send(struct ssif_info *ssif_info, 1051 unsigned char *data, 1052 unsigned int len) 1053 { 1054 if (len > IPMI_MAX_MSG_LENGTH) 1055 return -E2BIG; 1056 if (len > ssif_info->max_xmit_msg_size) 1057 return -E2BIG; 1058 1059 ssif_info->retries_left = SSIF_SEND_RETRIES; 1060 memcpy(ssif_info->data + 1, data, len); 1061 ssif_info->data_len = len; 1062 return start_resend(ssif_info); 1063 } 1064 1065 /* Must be called with the message lock held. */ 1066 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags) 1067 { 1068 struct ipmi_smi_msg *msg; 1069 unsigned long oflags; 1070 1071 restart: 1072 if (!SSIF_IDLE(ssif_info)) { 1073 ipmi_ssif_unlock_cond(ssif_info, flags); 1074 return; 1075 } 1076 1077 if (!ssif_info->waiting_msg) { 1078 ssif_info->curr_msg = NULL; 1079 ipmi_ssif_unlock_cond(ssif_info, flags); 1080 } else { 1081 int rv; 1082 1083 ssif_info->curr_msg = ssif_info->waiting_msg; 1084 ssif_info->waiting_msg = NULL; 1085 ipmi_ssif_unlock_cond(ssif_info, flags); 1086 rv = start_send(ssif_info, 1087 ssif_info->curr_msg->data, 1088 ssif_info->curr_msg->data_size); 1089 if (rv) { 1090 msg = ssif_info->curr_msg; 1091 ssif_info->curr_msg = NULL; 1092 return_hosed_msg(ssif_info, msg); 1093 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1094 goto restart; 1095 } 1096 } 1097 } 1098 1099 static void sender(void *send_info, 1100 struct ipmi_smi_msg *msg) 1101 { 1102 struct ssif_info *ssif_info = (struct ssif_info *) send_info; 1103 unsigned long oflags, *flags; 1104 1105 BUG_ON(ssif_info->waiting_msg); 1106 ssif_info->waiting_msg = msg; 1107 1108 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1109 start_next_msg(ssif_info, flags); 1110 1111 if (ssif_info->ssif_debug & SSIF_DEBUG_TIMING) { 1112 struct timespec64 t; 1113 1114 ktime_get_real_ts64(&t); 1115 dev_dbg(&ssif_info->client->dev, 1116 "**Enqueue %02x %02x: %lld.%6.6ld\n", 1117 msg->data[0], msg->data[1], 1118 (long long)t.tv_sec, (long)t.tv_nsec / NSEC_PER_USEC); 1119 } 1120 } 1121 1122 static int get_smi_info(void *send_info, struct ipmi_smi_info *data) 1123 { 1124 struct ssif_info *ssif_info = send_info; 1125 1126 data->addr_src = ssif_info->addr_source; 1127 data->dev = &ssif_info->client->dev; 1128 data->addr_info = ssif_info->addr_info; 1129 get_device(data->dev); 1130 1131 return 0; 1132 } 1133 1134 /* 1135 * Upper layer wants us to request events. 1136 */ 1137 static void request_events(void *send_info) 1138 { 1139 struct ssif_info *ssif_info = (struct ssif_info *) send_info; 1140 unsigned long oflags, *flags; 1141 1142 if (!ssif_info->has_event_buffer) 1143 return; 1144 1145 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1146 ssif_info->req_events = true; 1147 ipmi_ssif_unlock_cond(ssif_info, flags); 1148 } 1149 1150 /* 1151 * Upper layer is changing the flag saying whether we need to request 1152 * flags periodically or not. 1153 */ 1154 static void ssif_set_need_watch(void *send_info, unsigned int watch_mask) 1155 { 1156 struct ssif_info *ssif_info = (struct ssif_info *) send_info; 1157 unsigned long oflags, *flags; 1158 long timeout = 0; 1159 1160 if (watch_mask & IPMI_WATCH_MASK_CHECK_MESSAGES) 1161 timeout = SSIF_WATCH_MSG_TIMEOUT; 1162 else if (watch_mask) 1163 timeout = SSIF_WATCH_WATCHDOG_TIMEOUT; 1164 1165 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1166 if (timeout != ssif_info->watch_timeout) { 1167 ssif_info->watch_timeout = timeout; 1168 if (ssif_info->watch_timeout) 1169 mod_timer(&ssif_info->watch_timer, 1170 jiffies + ssif_info->watch_timeout); 1171 } 1172 ipmi_ssif_unlock_cond(ssif_info, flags); 1173 } 1174 1175 static int ssif_start_processing(void *send_info, 1176 struct ipmi_smi *intf) 1177 { 1178 struct ssif_info *ssif_info = send_info; 1179 1180 ssif_info->intf = intf; 1181 1182 return 0; 1183 } 1184 1185 #define MAX_SSIF_BMCS 4 1186 1187 static unsigned short addr[MAX_SSIF_BMCS]; 1188 static int num_addrs; 1189 module_param_array(addr, ushort, &num_addrs, 0); 1190 MODULE_PARM_DESC(addr, "The addresses to scan for IPMI BMCs on the SSIFs."); 1191 1192 static char *adapter_name[MAX_SSIF_BMCS]; 1193 static int num_adapter_names; 1194 module_param_array(adapter_name, charp, &num_adapter_names, 0); 1195 MODULE_PARM_DESC(adapter_name, "The string name of the I2C device that has the BMC. By default all devices are scanned."); 1196 1197 static int slave_addrs[MAX_SSIF_BMCS]; 1198 static int num_slave_addrs; 1199 module_param_array(slave_addrs, int, &num_slave_addrs, 0); 1200 MODULE_PARM_DESC(slave_addrs, 1201 "The default IPMB slave address for the controller."); 1202 1203 static bool alerts_broken; 1204 module_param(alerts_broken, bool, 0); 1205 MODULE_PARM_DESC(alerts_broken, "Don't enable alerts for the controller."); 1206 1207 /* 1208 * Bit 0 enables message debugging, bit 1 enables state debugging, and 1209 * bit 2 enables timing debugging. This is an array indexed by 1210 * interface number" 1211 */ 1212 static int dbg[MAX_SSIF_BMCS]; 1213 static int num_dbg; 1214 module_param_array(dbg, int, &num_dbg, 0); 1215 MODULE_PARM_DESC(dbg, "Turn on debugging."); 1216 1217 static bool ssif_dbg_probe; 1218 module_param_named(dbg_probe, ssif_dbg_probe, bool, 0); 1219 MODULE_PARM_DESC(dbg_probe, "Enable debugging of probing of adapters."); 1220 1221 static bool ssif_tryacpi = true; 1222 module_param_named(tryacpi, ssif_tryacpi, bool, 0); 1223 MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the default scan of the interfaces identified via ACPI"); 1224 1225 static bool ssif_trydmi = true; 1226 module_param_named(trydmi, ssif_trydmi, bool, 0); 1227 MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the default scan of the interfaces identified via DMI (SMBIOS)"); 1228 1229 static DEFINE_MUTEX(ssif_infos_mutex); 1230 static LIST_HEAD(ssif_infos); 1231 1232 #define IPMI_SSIF_ATTR(name) \ 1233 static ssize_t ipmi_##name##_show(struct device *dev, \ 1234 struct device_attribute *attr, \ 1235 char *buf) \ 1236 { \ 1237 struct ssif_info *ssif_info = dev_get_drvdata(dev); \ 1238 \ 1239 return snprintf(buf, 10, "%u\n", ssif_get_stat(ssif_info, name));\ 1240 } \ 1241 static DEVICE_ATTR(name, S_IRUGO, ipmi_##name##_show, NULL) 1242 1243 static ssize_t ipmi_type_show(struct device *dev, 1244 struct device_attribute *attr, 1245 char *buf) 1246 { 1247 return snprintf(buf, 10, "ssif\n"); 1248 } 1249 static DEVICE_ATTR(type, S_IRUGO, ipmi_type_show, NULL); 1250 1251 IPMI_SSIF_ATTR(sent_messages); 1252 IPMI_SSIF_ATTR(sent_messages_parts); 1253 IPMI_SSIF_ATTR(send_retries); 1254 IPMI_SSIF_ATTR(send_errors); 1255 IPMI_SSIF_ATTR(received_messages); 1256 IPMI_SSIF_ATTR(received_message_parts); 1257 IPMI_SSIF_ATTR(receive_retries); 1258 IPMI_SSIF_ATTR(receive_errors); 1259 IPMI_SSIF_ATTR(flag_fetches); 1260 IPMI_SSIF_ATTR(hosed); 1261 IPMI_SSIF_ATTR(events); 1262 IPMI_SSIF_ATTR(watchdog_pretimeouts); 1263 IPMI_SSIF_ATTR(alerts); 1264 1265 static struct attribute *ipmi_ssif_dev_attrs[] = { 1266 &dev_attr_type.attr, 1267 &dev_attr_sent_messages.attr, 1268 &dev_attr_sent_messages_parts.attr, 1269 &dev_attr_send_retries.attr, 1270 &dev_attr_send_errors.attr, 1271 &dev_attr_received_messages.attr, 1272 &dev_attr_received_message_parts.attr, 1273 &dev_attr_receive_retries.attr, 1274 &dev_attr_receive_errors.attr, 1275 &dev_attr_flag_fetches.attr, 1276 &dev_attr_hosed.attr, 1277 &dev_attr_events.attr, 1278 &dev_attr_watchdog_pretimeouts.attr, 1279 &dev_attr_alerts.attr, 1280 NULL 1281 }; 1282 1283 static const struct attribute_group ipmi_ssif_dev_attr_group = { 1284 .attrs = ipmi_ssif_dev_attrs, 1285 }; 1286 1287 static void shutdown_ssif(void *send_info) 1288 { 1289 struct ssif_info *ssif_info = send_info; 1290 1291 device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group); 1292 dev_set_drvdata(&ssif_info->client->dev, NULL); 1293 1294 /* make sure the driver is not looking for flags any more. */ 1295 while (ssif_info->ssif_state != SSIF_NORMAL) 1296 schedule_timeout(1); 1297 1298 ssif_info->stopping = true; 1299 del_timer_sync(&ssif_info->watch_timer); 1300 del_timer_sync(&ssif_info->retry_timer); 1301 if (ssif_info->thread) { 1302 complete(&ssif_info->wake_thread); 1303 kthread_stop(ssif_info->thread); 1304 } 1305 } 1306 1307 static int ssif_remove(struct i2c_client *client) 1308 { 1309 struct ssif_info *ssif_info = i2c_get_clientdata(client); 1310 struct ssif_addr_info *addr_info; 1311 1312 if (!ssif_info) 1313 return 0; 1314 1315 /* 1316 * After this point, we won't deliver anything asychronously 1317 * to the message handler. We can unregister ourself. 1318 */ 1319 ipmi_unregister_smi(ssif_info->intf); 1320 1321 list_for_each_entry(addr_info, &ssif_infos, link) { 1322 if (addr_info->client == client) { 1323 addr_info->client = NULL; 1324 break; 1325 } 1326 } 1327 1328 kfree(ssif_info); 1329 1330 return 0; 1331 } 1332 1333 static int read_response(struct i2c_client *client, unsigned char *resp) 1334 { 1335 int ret = -ENODEV, retry_cnt = SSIF_RECV_RETRIES; 1336 1337 while (retry_cnt > 0) { 1338 ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE, 1339 resp); 1340 if (ret > 0) 1341 break; 1342 msleep(SSIF_MSG_MSEC); 1343 retry_cnt--; 1344 if (retry_cnt <= 0) 1345 break; 1346 } 1347 1348 return ret; 1349 } 1350 1351 static int do_cmd(struct i2c_client *client, int len, unsigned char *msg, 1352 int *resp_len, unsigned char *resp) 1353 { 1354 int retry_cnt; 1355 int ret; 1356 1357 retry_cnt = SSIF_SEND_RETRIES; 1358 retry1: 1359 ret = i2c_smbus_write_block_data(client, SSIF_IPMI_REQUEST, len, msg); 1360 if (ret) { 1361 retry_cnt--; 1362 if (retry_cnt > 0) 1363 goto retry1; 1364 return -ENODEV; 1365 } 1366 1367 ret = read_response(client, resp); 1368 if (ret > 0) { 1369 /* Validate that the response is correct. */ 1370 if (ret < 3 || 1371 (resp[0] != (msg[0] | (1 << 2))) || 1372 (resp[1] != msg[1])) 1373 ret = -EINVAL; 1374 else if (ret > IPMI_MAX_MSG_LENGTH) { 1375 ret = -E2BIG; 1376 } else { 1377 *resp_len = ret; 1378 ret = 0; 1379 } 1380 } 1381 1382 return ret; 1383 } 1384 1385 static int ssif_detect(struct i2c_client *client, struct i2c_board_info *info) 1386 { 1387 unsigned char *resp; 1388 unsigned char msg[3]; 1389 int rv; 1390 int len; 1391 1392 resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); 1393 if (!resp) 1394 return -ENOMEM; 1395 1396 /* Do a Get Device ID command, since it is required. */ 1397 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1398 msg[1] = IPMI_GET_DEVICE_ID_CMD; 1399 rv = do_cmd(client, 2, msg, &len, resp); 1400 if (rv) 1401 rv = -ENODEV; 1402 else 1403 strlcpy(info->type, DEVICE_NAME, I2C_NAME_SIZE); 1404 kfree(resp); 1405 return rv; 1406 } 1407 1408 static int strcmp_nospace(char *s1, char *s2) 1409 { 1410 while (*s1 && *s2) { 1411 while (isspace(*s1)) 1412 s1++; 1413 while (isspace(*s2)) 1414 s2++; 1415 if (*s1 > *s2) 1416 return 1; 1417 if (*s1 < *s2) 1418 return -1; 1419 s1++; 1420 s2++; 1421 } 1422 return 0; 1423 } 1424 1425 static struct ssif_addr_info *ssif_info_find(unsigned short addr, 1426 char *adapter_name, 1427 bool match_null_name) 1428 { 1429 struct ssif_addr_info *info, *found = NULL; 1430 1431 restart: 1432 list_for_each_entry(info, &ssif_infos, link) { 1433 if (info->binfo.addr == addr) { 1434 if (info->addr_src == SI_SMBIOS) 1435 info->adapter_name = kstrdup(adapter_name, 1436 GFP_KERNEL); 1437 1438 if (info->adapter_name || adapter_name) { 1439 if (!info->adapter_name != !adapter_name) { 1440 /* One is NULL and one is not */ 1441 continue; 1442 } 1443 if (adapter_name && 1444 strcmp_nospace(info->adapter_name, 1445 adapter_name)) 1446 /* Names do not match */ 1447 continue; 1448 } 1449 found = info; 1450 break; 1451 } 1452 } 1453 1454 if (!found && match_null_name) { 1455 /* Try to get an exact match first, then try with a NULL name */ 1456 adapter_name = NULL; 1457 match_null_name = false; 1458 goto restart; 1459 } 1460 1461 return found; 1462 } 1463 1464 static bool check_acpi(struct ssif_info *ssif_info, struct device *dev) 1465 { 1466 #ifdef CONFIG_ACPI 1467 acpi_handle acpi_handle; 1468 1469 acpi_handle = ACPI_HANDLE(dev); 1470 if (acpi_handle) { 1471 ssif_info->addr_source = SI_ACPI; 1472 ssif_info->addr_info.acpi_info.acpi_handle = acpi_handle; 1473 request_module("acpi_ipmi"); 1474 return true; 1475 } 1476 #endif 1477 return false; 1478 } 1479 1480 static int find_slave_address(struct i2c_client *client, int slave_addr) 1481 { 1482 #ifdef CONFIG_IPMI_DMI_DECODE 1483 if (!slave_addr) 1484 slave_addr = ipmi_dmi_get_slave_addr( 1485 SI_TYPE_INVALID, 1486 i2c_adapter_id(client->adapter), 1487 client->addr); 1488 #endif 1489 1490 return slave_addr; 1491 } 1492 1493 static int start_multipart_test(struct i2c_client *client, 1494 unsigned char *msg, bool do_middle) 1495 { 1496 int retry_cnt = SSIF_SEND_RETRIES, ret; 1497 1498 retry_write: 1499 ret = i2c_smbus_write_block_data(client, 1500 SSIF_IPMI_MULTI_PART_REQUEST_START, 1501 32, msg); 1502 if (ret) { 1503 retry_cnt--; 1504 if (retry_cnt > 0) 1505 goto retry_write; 1506 dev_err(&client->dev, "Could not write multi-part start, though the BMC said it could handle it. Just limit sends to one part.\n"); 1507 return ret; 1508 } 1509 1510 if (!do_middle) 1511 return 0; 1512 1513 ret = i2c_smbus_write_block_data(client, 1514 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE, 1515 32, msg + 32); 1516 if (ret) { 1517 dev_err(&client->dev, "Could not write multi-part middle, though the BMC said it could handle it. Just limit sends to one part.\n"); 1518 return ret; 1519 } 1520 1521 return 0; 1522 } 1523 1524 static void test_multipart_messages(struct i2c_client *client, 1525 struct ssif_info *ssif_info, 1526 unsigned char *resp) 1527 { 1528 unsigned char msg[65]; 1529 int ret; 1530 bool do_middle; 1531 1532 if (ssif_info->max_xmit_msg_size <= 32) 1533 return; 1534 1535 do_middle = ssif_info->max_xmit_msg_size > 63; 1536 1537 memset(msg, 0, sizeof(msg)); 1538 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1539 msg[1] = IPMI_GET_DEVICE_ID_CMD; 1540 1541 /* 1542 * The specification is all messed up dealing with sending 1543 * multi-part messages. Per what the specification says, it 1544 * is impossible to send a message that is a multiple of 32 1545 * bytes, except for 32 itself. It talks about a "start" 1546 * transaction (cmd=6) that must be 32 bytes, "middle" 1547 * transaction (cmd=7) that must be 32 bytes, and an "end" 1548 * transaction. The "end" transaction is shown as cmd=7 in 1549 * the text, but if that's the case there is no way to 1550 * differentiate between a middle and end part except the 1551 * length being less than 32. But there is a table at the far 1552 * end of the section (that I had never noticed until someone 1553 * pointed it out to me) that mentions it as cmd=8. 1554 * 1555 * After some thought, I think the example is wrong and the 1556 * end transaction should be cmd=8. But some systems don't 1557 * implement cmd=8, they use a zero-length end transaction, 1558 * even though that violates the SMBus specification. 1559 * 1560 * So, to work around this, this code tests if cmd=8 works. 1561 * If it does, then we use that. If not, it tests zero- 1562 * byte end transactions. If that works, good. If not, 1563 * we only allow 63-byte transactions max. 1564 */ 1565 1566 ret = start_multipart_test(client, msg, do_middle); 1567 if (ret) 1568 goto out_no_multi_part; 1569 1570 ret = i2c_smbus_write_block_data(client, 1571 SSIF_IPMI_MULTI_PART_REQUEST_END, 1572 1, msg + 64); 1573 1574 if (!ret) 1575 ret = read_response(client, resp); 1576 1577 if (ret > 0) { 1578 /* End transactions work, we are good. */ 1579 ssif_info->cmd8_works = true; 1580 return; 1581 } 1582 1583 ret = start_multipart_test(client, msg, do_middle); 1584 if (ret) { 1585 dev_err(&client->dev, "Second multipart test failed.\n"); 1586 goto out_no_multi_part; 1587 } 1588 1589 ret = i2c_smbus_write_block_data(client, 1590 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE, 1591 0, msg + 64); 1592 if (!ret) 1593 ret = read_response(client, resp); 1594 if (ret > 0) 1595 /* Zero-size end parts work, use those. */ 1596 return; 1597 1598 /* Limit to 63 bytes and use a short middle command to mark the end. */ 1599 if (ssif_info->max_xmit_msg_size > 63) 1600 ssif_info->max_xmit_msg_size = 63; 1601 return; 1602 1603 out_no_multi_part: 1604 ssif_info->max_xmit_msg_size = 32; 1605 return; 1606 } 1607 1608 /* 1609 * Global enables we care about. 1610 */ 1611 #define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \ 1612 IPMI_BMC_EVT_MSG_INTR) 1613 1614 static void ssif_remove_dup(struct i2c_client *client) 1615 { 1616 struct ssif_info *ssif_info = i2c_get_clientdata(client); 1617 1618 ipmi_unregister_smi(ssif_info->intf); 1619 kfree(ssif_info); 1620 } 1621 1622 static int ssif_add_infos(struct i2c_client *client) 1623 { 1624 struct ssif_addr_info *info; 1625 1626 info = kzalloc(sizeof(*info), GFP_KERNEL); 1627 if (!info) 1628 return -ENOMEM; 1629 info->addr_src = SI_ACPI; 1630 info->client = client; 1631 info->adapter_name = kstrdup(client->adapter->name, GFP_KERNEL); 1632 info->binfo.addr = client->addr; 1633 list_add_tail(&info->link, &ssif_infos); 1634 return 0; 1635 } 1636 1637 /* 1638 * Prefer ACPI over SMBIOS, if both are available. 1639 * So if we get an ACPI interface and have already registered a SMBIOS 1640 * interface at the same address, remove the SMBIOS and add the ACPI one. 1641 */ 1642 static int ssif_check_and_remove(struct i2c_client *client, 1643 struct ssif_info *ssif_info) 1644 { 1645 struct ssif_addr_info *info; 1646 1647 list_for_each_entry(info, &ssif_infos, link) { 1648 if (!info->client) 1649 return 0; 1650 if (!strcmp(info->adapter_name, client->adapter->name) && 1651 info->binfo.addr == client->addr) { 1652 if (info->addr_src == SI_ACPI) 1653 return -EEXIST; 1654 1655 if (ssif_info->addr_source == SI_ACPI && 1656 info->addr_src == SI_SMBIOS) { 1657 dev_info(&client->dev, 1658 "Removing %s-specified SSIF interface in favor of ACPI\n", 1659 ipmi_addr_src_to_str(info->addr_src)); 1660 ssif_remove_dup(info->client); 1661 return 0; 1662 } 1663 } 1664 } 1665 return 0; 1666 } 1667 1668 static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) 1669 { 1670 unsigned char msg[3]; 1671 unsigned char *resp; 1672 struct ssif_info *ssif_info; 1673 int rv = 0; 1674 int len; 1675 int i; 1676 u8 slave_addr = 0; 1677 struct ssif_addr_info *addr_info = NULL; 1678 1679 mutex_lock(&ssif_infos_mutex); 1680 resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); 1681 if (!resp) { 1682 mutex_unlock(&ssif_infos_mutex); 1683 return -ENOMEM; 1684 } 1685 1686 ssif_info = kzalloc(sizeof(*ssif_info), GFP_KERNEL); 1687 if (!ssif_info) { 1688 kfree(resp); 1689 mutex_unlock(&ssif_infos_mutex); 1690 return -ENOMEM; 1691 } 1692 1693 if (!check_acpi(ssif_info, &client->dev)) { 1694 addr_info = ssif_info_find(client->addr, client->adapter->name, 1695 true); 1696 if (!addr_info) { 1697 /* Must have come in through sysfs. */ 1698 ssif_info->addr_source = SI_HOTMOD; 1699 } else { 1700 ssif_info->addr_source = addr_info->addr_src; 1701 ssif_info->ssif_debug = addr_info->debug; 1702 ssif_info->addr_info = addr_info->addr_info; 1703 addr_info->client = client; 1704 slave_addr = addr_info->slave_addr; 1705 } 1706 } 1707 1708 rv = ssif_check_and_remove(client, ssif_info); 1709 /* If rv is 0 and addr source is not SI_ACPI, continue probing */ 1710 if (!rv && ssif_info->addr_source == SI_ACPI) { 1711 rv = ssif_add_infos(client); 1712 if (rv) { 1713 dev_err(&client->dev, "Out of memory!, exiting ..\n"); 1714 goto out; 1715 } 1716 } else if (rv) { 1717 dev_err(&client->dev, "Not probing, Interface already present\n"); 1718 goto out; 1719 } 1720 1721 slave_addr = find_slave_address(client, slave_addr); 1722 1723 dev_info(&client->dev, 1724 "Trying %s-specified SSIF interface at i2c address 0x%x, adapter %s, slave address 0x%x\n", 1725 ipmi_addr_src_to_str(ssif_info->addr_source), 1726 client->addr, client->adapter->name, slave_addr); 1727 1728 ssif_info->client = client; 1729 i2c_set_clientdata(client, ssif_info); 1730 1731 /* Now check for system interface capabilities */ 1732 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1733 msg[1] = IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD; 1734 msg[2] = 0; /* SSIF */ 1735 rv = do_cmd(client, 3, msg, &len, resp); 1736 if (!rv && (len >= 3) && (resp[2] == 0)) { 1737 if (len < 7) { 1738 if (ssif_dbg_probe) 1739 dev_dbg(&ssif_info->client->dev, 1740 "SSIF info too short: %d\n", len); 1741 goto no_support; 1742 } 1743 1744 /* Got a good SSIF response, handle it. */ 1745 ssif_info->max_xmit_msg_size = resp[5]; 1746 ssif_info->max_recv_msg_size = resp[6]; 1747 ssif_info->multi_support = (resp[4] >> 6) & 0x3; 1748 ssif_info->supports_pec = (resp[4] >> 3) & 0x1; 1749 1750 /* Sanitize the data */ 1751 switch (ssif_info->multi_support) { 1752 case SSIF_NO_MULTI: 1753 if (ssif_info->max_xmit_msg_size > 32) 1754 ssif_info->max_xmit_msg_size = 32; 1755 if (ssif_info->max_recv_msg_size > 32) 1756 ssif_info->max_recv_msg_size = 32; 1757 break; 1758 1759 case SSIF_MULTI_2_PART: 1760 if (ssif_info->max_xmit_msg_size > 63) 1761 ssif_info->max_xmit_msg_size = 63; 1762 if (ssif_info->max_recv_msg_size > 62) 1763 ssif_info->max_recv_msg_size = 62; 1764 break; 1765 1766 case SSIF_MULTI_n_PART: 1767 /* We take whatever size given, but do some testing. */ 1768 break; 1769 1770 default: 1771 /* Data is not sane, just give up. */ 1772 goto no_support; 1773 } 1774 } else { 1775 no_support: 1776 /* Assume no multi-part or PEC support */ 1777 dev_info(&ssif_info->client->dev, 1778 "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n", 1779 rv, len, resp[2]); 1780 1781 ssif_info->max_xmit_msg_size = 32; 1782 ssif_info->max_recv_msg_size = 32; 1783 ssif_info->multi_support = SSIF_NO_MULTI; 1784 ssif_info->supports_pec = 0; 1785 } 1786 1787 test_multipart_messages(client, ssif_info, resp); 1788 1789 /* Make sure the NMI timeout is cleared. */ 1790 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1791 msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; 1792 msg[2] = WDT_PRE_TIMEOUT_INT; 1793 rv = do_cmd(client, 3, msg, &len, resp); 1794 if (rv || (len < 3) || (resp[2] != 0)) 1795 dev_warn(&ssif_info->client->dev, 1796 "Unable to clear message flags: %d %d %2.2x\n", 1797 rv, len, resp[2]); 1798 1799 /* Attempt to enable the event buffer. */ 1800 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1801 msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; 1802 rv = do_cmd(client, 2, msg, &len, resp); 1803 if (rv || (len < 4) || (resp[2] != 0)) { 1804 dev_warn(&ssif_info->client->dev, 1805 "Error getting global enables: %d %d %2.2x\n", 1806 rv, len, resp[2]); 1807 rv = 0; /* Not fatal */ 1808 goto found; 1809 } 1810 1811 ssif_info->global_enables = resp[3]; 1812 1813 if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) { 1814 ssif_info->has_event_buffer = true; 1815 /* buffer is already enabled, nothing to do. */ 1816 goto found; 1817 } 1818 1819 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1820 msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; 1821 msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF; 1822 rv = do_cmd(client, 3, msg, &len, resp); 1823 if (rv || (len < 2)) { 1824 dev_warn(&ssif_info->client->dev, 1825 "Error setting global enables: %d %d %2.2x\n", 1826 rv, len, resp[2]); 1827 rv = 0; /* Not fatal */ 1828 goto found; 1829 } 1830 1831 if (resp[2] == 0) { 1832 /* A successful return means the event buffer is supported. */ 1833 ssif_info->has_event_buffer = true; 1834 ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF; 1835 } 1836 1837 /* Some systems don't behave well if you enable alerts. */ 1838 if (alerts_broken) 1839 goto found; 1840 1841 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1842 msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; 1843 msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR; 1844 rv = do_cmd(client, 3, msg, &len, resp); 1845 if (rv || (len < 2)) { 1846 dev_warn(&ssif_info->client->dev, 1847 "Error setting global enables: %d %d %2.2x\n", 1848 rv, len, resp[2]); 1849 rv = 0; /* Not fatal */ 1850 goto found; 1851 } 1852 1853 if (resp[2] == 0) { 1854 /* A successful return means the alert is supported. */ 1855 ssif_info->supports_alert = true; 1856 ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR; 1857 } 1858 1859 found: 1860 if (ssif_dbg_probe) { 1861 dev_dbg(&ssif_info->client->dev, 1862 "%s: i2c_probe found device at i2c address %x\n", 1863 __func__, client->addr); 1864 } 1865 1866 spin_lock_init(&ssif_info->lock); 1867 ssif_info->ssif_state = SSIF_NORMAL; 1868 timer_setup(&ssif_info->retry_timer, retry_timeout, 0); 1869 timer_setup(&ssif_info->watch_timer, watch_timeout, 0); 1870 1871 for (i = 0; i < SSIF_NUM_STATS; i++) 1872 atomic_set(&ssif_info->stats[i], 0); 1873 1874 if (ssif_info->supports_pec) 1875 ssif_info->client->flags |= I2C_CLIENT_PEC; 1876 1877 ssif_info->handlers.owner = THIS_MODULE; 1878 ssif_info->handlers.start_processing = ssif_start_processing; 1879 ssif_info->handlers.shutdown = shutdown_ssif; 1880 ssif_info->handlers.get_smi_info = get_smi_info; 1881 ssif_info->handlers.sender = sender; 1882 ssif_info->handlers.request_events = request_events; 1883 ssif_info->handlers.set_need_watch = ssif_set_need_watch; 1884 1885 { 1886 unsigned int thread_num; 1887 1888 thread_num = ((i2c_adapter_id(ssif_info->client->adapter) 1889 << 8) | 1890 ssif_info->client->addr); 1891 init_completion(&ssif_info->wake_thread); 1892 ssif_info->thread = kthread_run(ipmi_ssif_thread, ssif_info, 1893 "kssif%4.4x", thread_num); 1894 if (IS_ERR(ssif_info->thread)) { 1895 rv = PTR_ERR(ssif_info->thread); 1896 dev_notice(&ssif_info->client->dev, 1897 "Could not start kernel thread: error %d\n", 1898 rv); 1899 goto out; 1900 } 1901 } 1902 1903 dev_set_drvdata(&ssif_info->client->dev, ssif_info); 1904 rv = device_add_group(&ssif_info->client->dev, 1905 &ipmi_ssif_dev_attr_group); 1906 if (rv) { 1907 dev_err(&ssif_info->client->dev, 1908 "Unable to add device attributes: error %d\n", 1909 rv); 1910 goto out; 1911 } 1912 1913 rv = ipmi_register_smi(&ssif_info->handlers, 1914 ssif_info, 1915 &ssif_info->client->dev, 1916 slave_addr); 1917 if (rv) { 1918 dev_err(&ssif_info->client->dev, 1919 "Unable to register device: error %d\n", rv); 1920 goto out_remove_attr; 1921 } 1922 1923 out: 1924 if (rv) { 1925 if (addr_info) 1926 addr_info->client = NULL; 1927 1928 dev_err(&ssif_info->client->dev, 1929 "Unable to start IPMI SSIF: %d\n", rv); 1930 kfree(ssif_info); 1931 } 1932 kfree(resp); 1933 mutex_unlock(&ssif_infos_mutex); 1934 return rv; 1935 1936 out_remove_attr: 1937 device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group); 1938 dev_set_drvdata(&ssif_info->client->dev, NULL); 1939 goto out; 1940 } 1941 1942 static int new_ssif_client(int addr, char *adapter_name, 1943 int debug, int slave_addr, 1944 enum ipmi_addr_src addr_src, 1945 struct device *dev) 1946 { 1947 struct ssif_addr_info *addr_info; 1948 int rv = 0; 1949 1950 mutex_lock(&ssif_infos_mutex); 1951 if (ssif_info_find(addr, adapter_name, false)) { 1952 rv = -EEXIST; 1953 goto out_unlock; 1954 } 1955 1956 addr_info = kzalloc(sizeof(*addr_info), GFP_KERNEL); 1957 if (!addr_info) { 1958 rv = -ENOMEM; 1959 goto out_unlock; 1960 } 1961 1962 if (adapter_name) { 1963 addr_info->adapter_name = kstrdup(adapter_name, GFP_KERNEL); 1964 if (!addr_info->adapter_name) { 1965 kfree(addr_info); 1966 rv = -ENOMEM; 1967 goto out_unlock; 1968 } 1969 } 1970 1971 strncpy(addr_info->binfo.type, DEVICE_NAME, 1972 sizeof(addr_info->binfo.type)); 1973 addr_info->binfo.addr = addr; 1974 addr_info->binfo.platform_data = addr_info; 1975 addr_info->debug = debug; 1976 addr_info->slave_addr = slave_addr; 1977 addr_info->addr_src = addr_src; 1978 addr_info->dev = dev; 1979 1980 if (dev) 1981 dev_set_drvdata(dev, addr_info); 1982 1983 list_add_tail(&addr_info->link, &ssif_infos); 1984 1985 /* Address list will get it */ 1986 1987 out_unlock: 1988 mutex_unlock(&ssif_infos_mutex); 1989 return rv; 1990 } 1991 1992 static void free_ssif_clients(void) 1993 { 1994 struct ssif_addr_info *info, *tmp; 1995 1996 mutex_lock(&ssif_infos_mutex); 1997 list_for_each_entry_safe(info, tmp, &ssif_infos, link) { 1998 list_del(&info->link); 1999 kfree(info->adapter_name); 2000 kfree(info); 2001 } 2002 mutex_unlock(&ssif_infos_mutex); 2003 } 2004 2005 static unsigned short *ssif_address_list(void) 2006 { 2007 struct ssif_addr_info *info; 2008 unsigned int count = 0, i = 0; 2009 unsigned short *address_list; 2010 2011 list_for_each_entry(info, &ssif_infos, link) 2012 count++; 2013 2014 address_list = kcalloc(count + 1, sizeof(*address_list), 2015 GFP_KERNEL); 2016 if (!address_list) 2017 return NULL; 2018 2019 list_for_each_entry(info, &ssif_infos, link) { 2020 unsigned short addr = info->binfo.addr; 2021 int j; 2022 2023 for (j = 0; j < i; j++) { 2024 if (address_list[j] == addr) 2025 /* Found a dup. */ 2026 break; 2027 } 2028 if (j == i) /* Didn't find it in the list. */ 2029 address_list[i++] = addr; 2030 } 2031 address_list[i] = I2C_CLIENT_END; 2032 2033 return address_list; 2034 } 2035 2036 #ifdef CONFIG_ACPI 2037 static const struct acpi_device_id ssif_acpi_match[] = { 2038 { "IPI0001", 0 }, 2039 { }, 2040 }; 2041 MODULE_DEVICE_TABLE(acpi, ssif_acpi_match); 2042 #endif 2043 2044 #ifdef CONFIG_DMI 2045 static int dmi_ipmi_probe(struct platform_device *pdev) 2046 { 2047 u8 slave_addr = 0; 2048 u16 i2c_addr; 2049 int rv; 2050 2051 if (!ssif_trydmi) 2052 return -ENODEV; 2053 2054 rv = device_property_read_u16(&pdev->dev, "i2c-addr", &i2c_addr); 2055 if (rv) { 2056 dev_warn(&pdev->dev, "No i2c-addr property\n"); 2057 return -ENODEV; 2058 } 2059 2060 rv = device_property_read_u8(&pdev->dev, "slave-addr", &slave_addr); 2061 if (rv) 2062 slave_addr = 0x20; 2063 2064 return new_ssif_client(i2c_addr, NULL, 0, 2065 slave_addr, SI_SMBIOS, &pdev->dev); 2066 } 2067 #else 2068 static int dmi_ipmi_probe(struct platform_device *pdev) 2069 { 2070 return -ENODEV; 2071 } 2072 #endif 2073 2074 static const struct i2c_device_id ssif_id[] = { 2075 { DEVICE_NAME, 0 }, 2076 { } 2077 }; 2078 MODULE_DEVICE_TABLE(i2c, ssif_id); 2079 2080 static struct i2c_driver ssif_i2c_driver = { 2081 .class = I2C_CLASS_HWMON, 2082 .driver = { 2083 .name = DEVICE_NAME 2084 }, 2085 .probe = ssif_probe, 2086 .remove = ssif_remove, 2087 .alert = ssif_alert, 2088 .id_table = ssif_id, 2089 .detect = ssif_detect 2090 }; 2091 2092 static int ssif_platform_probe(struct platform_device *dev) 2093 { 2094 return dmi_ipmi_probe(dev); 2095 } 2096 2097 static int ssif_platform_remove(struct platform_device *dev) 2098 { 2099 struct ssif_addr_info *addr_info = dev_get_drvdata(&dev->dev); 2100 2101 if (!addr_info) 2102 return 0; 2103 2104 mutex_lock(&ssif_infos_mutex); 2105 list_del(&addr_info->link); 2106 kfree(addr_info); 2107 mutex_unlock(&ssif_infos_mutex); 2108 return 0; 2109 } 2110 2111 static const struct platform_device_id ssif_plat_ids[] = { 2112 { "dmi-ipmi-ssif", 0 }, 2113 { } 2114 }; 2115 2116 static struct platform_driver ipmi_driver = { 2117 .driver = { 2118 .name = DEVICE_NAME, 2119 }, 2120 .probe = ssif_platform_probe, 2121 .remove = ssif_platform_remove, 2122 .id_table = ssif_plat_ids 2123 }; 2124 2125 static int init_ipmi_ssif(void) 2126 { 2127 int i; 2128 int rv; 2129 2130 if (initialized) 2131 return 0; 2132 2133 pr_info("IPMI SSIF Interface driver\n"); 2134 2135 /* build list for i2c from addr list */ 2136 for (i = 0; i < num_addrs; i++) { 2137 rv = new_ssif_client(addr[i], adapter_name[i], 2138 dbg[i], slave_addrs[i], 2139 SI_HARDCODED, NULL); 2140 if (rv) 2141 pr_err("Couldn't add hardcoded device at addr 0x%x\n", 2142 addr[i]); 2143 } 2144 2145 if (ssif_tryacpi) 2146 ssif_i2c_driver.driver.acpi_match_table = 2147 ACPI_PTR(ssif_acpi_match); 2148 2149 if (ssif_trydmi) { 2150 rv = platform_driver_register(&ipmi_driver); 2151 if (rv) 2152 pr_err("Unable to register driver: %d\n", rv); 2153 else 2154 platform_registered = true; 2155 } 2156 2157 ssif_i2c_driver.address_list = ssif_address_list(); 2158 2159 rv = i2c_add_driver(&ssif_i2c_driver); 2160 if (!rv) 2161 initialized = true; 2162 2163 return rv; 2164 } 2165 module_init(init_ipmi_ssif); 2166 2167 static void cleanup_ipmi_ssif(void) 2168 { 2169 if (!initialized) 2170 return; 2171 2172 initialized = false; 2173 2174 i2c_del_driver(&ssif_i2c_driver); 2175 2176 kfree(ssif_i2c_driver.address_list); 2177 2178 if (ssif_trydmi && platform_registered) 2179 platform_driver_unregister(&ipmi_driver); 2180 2181 free_ssif_clients(); 2182 } 2183 module_exit(cleanup_ipmi_ssif); 2184 2185 MODULE_ALIAS("platform:dmi-ipmi-ssif"); 2186 MODULE_AUTHOR("Todd C Davis <todd.c.davis@intel.com>, Corey Minyard <minyard@acm.org>"); 2187 MODULE_DESCRIPTION("IPMI driver for management controllers on a SMBus"); 2188 MODULE_LICENSE("GPL"); 2189