xref: /openbmc/linux/drivers/char/ipmi/ipmi_ssif.c (revision 423997ff)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * ipmi_ssif.c
4  *
5  * The interface to the IPMI driver for SMBus access to a SMBus
6  * compliant device.  Called SSIF by the IPMI spec.
7  *
8  * Author: Intel Corporation
9  *         Todd Davis <todd.c.davis@intel.com>
10  *
11  * Rewritten by Corey Minyard <minyard@acm.org> to support the
12  * non-blocking I2C interface, add support for multi-part
13  * transactions, add PEC support, and general clenaup.
14  *
15  * Copyright 2003 Intel Corporation
16  * Copyright 2005 MontaVista Software
17  */
18 
19 /*
20  * This file holds the "policy" for the interface to the SSIF state
21  * machine.  It does the configuration, handles timers and interrupts,
22  * and drives the real SSIF state machine.
23  */
24 
25 /*
26  * TODO: Figure out how to use SMB alerts.  This will require a new
27  * interface into the I2C driver, I believe.
28  */
29 
30 #define pr_fmt(fmt) "ipmi_ssif: " fmt
31 #define dev_fmt(fmt) "ipmi_ssif: " fmt
32 
33 #if defined(MODVERSIONS)
34 #include <linux/modversions.h>
35 #endif
36 
37 #include <linux/module.h>
38 #include <linux/moduleparam.h>
39 #include <linux/sched.h>
40 #include <linux/seq_file.h>
41 #include <linux/timer.h>
42 #include <linux/delay.h>
43 #include <linux/errno.h>
44 #include <linux/spinlock.h>
45 #include <linux/slab.h>
46 #include <linux/list.h>
47 #include <linux/i2c.h>
48 #include <linux/ipmi_smi.h>
49 #include <linux/init.h>
50 #include <linux/dmi.h>
51 #include <linux/kthread.h>
52 #include <linux/acpi.h>
53 #include <linux/ctype.h>
54 #include <linux/time64.h>
55 #include "ipmi_si_sm.h"
56 #include "ipmi_dmi.h"
57 
58 #define DEVICE_NAME "ipmi_ssif"
59 
60 #define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD	0x57
61 
62 #define	SSIF_IPMI_REQUEST			2
63 #define	SSIF_IPMI_MULTI_PART_REQUEST_START	6
64 #define	SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE	7
65 #define	SSIF_IPMI_MULTI_PART_REQUEST_END	8
66 #define	SSIF_IPMI_RESPONSE			3
67 #define	SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE	9
68 
69 /* ssif_debug is a bit-field
70  *	SSIF_DEBUG_MSG -	commands and their responses
71  *	SSIF_DEBUG_STATES -	message states
72  *	SSIF_DEBUG_TIMING -	 Measure times between events in the driver
73  */
74 #define SSIF_DEBUG_TIMING	4
75 #define SSIF_DEBUG_STATE	2
76 #define SSIF_DEBUG_MSG		1
77 #define SSIF_NODEBUG		0
78 #define SSIF_DEFAULT_DEBUG	(SSIF_NODEBUG)
79 
80 /*
81  * Timer values
82  */
83 #define SSIF_MSG_USEC		20000	/* 20ms between message tries. */
84 #define SSIF_MSG_PART_USEC	5000	/* 5ms for a message part */
85 
86 /* How many times to we retry sending/receiving the message. */
87 #define	SSIF_SEND_RETRIES	5
88 #define	SSIF_RECV_RETRIES	250
89 
90 #define SSIF_MSG_MSEC		(SSIF_MSG_USEC / 1000)
91 #define SSIF_MSG_JIFFIES	((SSIF_MSG_USEC * 1000) / TICK_NSEC)
92 #define SSIF_MSG_PART_JIFFIES	((SSIF_MSG_PART_USEC * 1000) / TICK_NSEC)
93 
94 /*
95  * Timeout for the watch, only used for get flag timer.
96  */
97 #define SSIF_WATCH_MSG_TIMEOUT		msecs_to_jiffies(10)
98 #define SSIF_WATCH_WATCHDOG_TIMEOUT	msecs_to_jiffies(250)
99 
100 enum ssif_intf_state {
101 	SSIF_NORMAL,
102 	SSIF_GETTING_FLAGS,
103 	SSIF_GETTING_EVENTS,
104 	SSIF_CLEARING_FLAGS,
105 	SSIF_GETTING_MESSAGES,
106 	/* FIXME - add watchdog stuff. */
107 };
108 
109 #define SSIF_IDLE(ssif)	 ((ssif)->ssif_state == SSIF_NORMAL \
110 			  && (ssif)->curr_msg == NULL)
111 
112 /*
113  * Indexes into stats[] in ssif_info below.
114  */
115 enum ssif_stat_indexes {
116 	/* Number of total messages sent. */
117 	SSIF_STAT_sent_messages = 0,
118 
119 	/*
120 	 * Number of message parts sent.  Messages may be broken into
121 	 * parts if they are long.
122 	 */
123 	SSIF_STAT_sent_messages_parts,
124 
125 	/*
126 	 * Number of time a message was retried.
127 	 */
128 	SSIF_STAT_send_retries,
129 
130 	/*
131 	 * Number of times the send of a message failed.
132 	 */
133 	SSIF_STAT_send_errors,
134 
135 	/*
136 	 * Number of message responses received.
137 	 */
138 	SSIF_STAT_received_messages,
139 
140 	/*
141 	 * Number of message fragments received.
142 	 */
143 	SSIF_STAT_received_message_parts,
144 
145 	/*
146 	 * Number of times the receive of a message was retried.
147 	 */
148 	SSIF_STAT_receive_retries,
149 
150 	/*
151 	 * Number of errors receiving messages.
152 	 */
153 	SSIF_STAT_receive_errors,
154 
155 	/*
156 	 * Number of times a flag fetch was requested.
157 	 */
158 	SSIF_STAT_flag_fetches,
159 
160 	/*
161 	 * Number of times the hardware didn't follow the state machine.
162 	 */
163 	SSIF_STAT_hosed,
164 
165 	/*
166 	 * Number of received events.
167 	 */
168 	SSIF_STAT_events,
169 
170 	/* Number of asyncronous messages received. */
171 	SSIF_STAT_incoming_messages,
172 
173 	/* Number of watchdog pretimeouts. */
174 	SSIF_STAT_watchdog_pretimeouts,
175 
176 	/* Number of alers received. */
177 	SSIF_STAT_alerts,
178 
179 	/* Always add statistics before this value, it must be last. */
180 	SSIF_NUM_STATS
181 };
182 
183 struct ssif_addr_info {
184 	struct i2c_board_info binfo;
185 	char *adapter_name;
186 	int debug;
187 	int slave_addr;
188 	enum ipmi_addr_src addr_src;
189 	union ipmi_smi_info_union addr_info;
190 	struct device *dev;
191 	struct i2c_client *client;
192 
193 	struct i2c_client *added_client;
194 
195 	struct mutex clients_mutex;
196 	struct list_head clients;
197 
198 	struct list_head link;
199 };
200 
201 struct ssif_info;
202 
203 typedef void (*ssif_i2c_done)(struct ssif_info *ssif_info, int result,
204 			     unsigned char *data, unsigned int len);
205 
206 struct ssif_info {
207 	struct ipmi_smi     *intf;
208 	spinlock_t	    lock;
209 	struct ipmi_smi_msg *waiting_msg;
210 	struct ipmi_smi_msg *curr_msg;
211 	enum ssif_intf_state ssif_state;
212 	unsigned long       ssif_debug;
213 
214 	struct ipmi_smi_handlers handlers;
215 
216 	enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */
217 	union ipmi_smi_info_union addr_info;
218 
219 	/*
220 	 * Flags from the last GET_MSG_FLAGS command, used when an ATTN
221 	 * is set to hold the flags until we are done handling everything
222 	 * from the flags.
223 	 */
224 #define RECEIVE_MSG_AVAIL	0x01
225 #define EVENT_MSG_BUFFER_FULL	0x02
226 #define WDT_PRE_TIMEOUT_INT	0x08
227 	unsigned char       msg_flags;
228 
229 	u8		    global_enables;
230 	bool		    has_event_buffer;
231 	bool		    supports_alert;
232 
233 	/*
234 	 * Used to tell what we should do with alerts.  If we are
235 	 * waiting on a response, read the data immediately.
236 	 */
237 	bool		    got_alert;
238 	bool		    waiting_alert;
239 
240 	/*
241 	 * If set to true, this will request events the next time the
242 	 * state machine is idle.
243 	 */
244 	bool                req_events;
245 
246 	/*
247 	 * If set to true, this will request flags the next time the
248 	 * state machine is idle.
249 	 */
250 	bool                req_flags;
251 
252 	/*
253 	 * Used to perform timer operations when run-to-completion
254 	 * mode is on.  This is a countdown timer.
255 	 */
256 	int                 rtc_us_timer;
257 
258 	/* Used for sending/receiving data.  +1 for the length. */
259 	unsigned char data[IPMI_MAX_MSG_LENGTH + 1];
260 	unsigned int  data_len;
261 
262 	/* Temp receive buffer, gets copied into data. */
263 	unsigned char recv[I2C_SMBUS_BLOCK_MAX];
264 
265 	struct i2c_client *client;
266 	ssif_i2c_done done_handler;
267 
268 	/* Thread interface handling */
269 	struct task_struct *thread;
270 	struct completion wake_thread;
271 	bool stopping;
272 	int i2c_read_write;
273 	int i2c_command;
274 	unsigned char *i2c_data;
275 	unsigned int i2c_size;
276 
277 	struct timer_list retry_timer;
278 	int retries_left;
279 
280 	long watch_timeout;		/* Timeout for flags check, 0 if off. */
281 	struct timer_list watch_timer;	/* Flag fetch timer. */
282 
283 	/* Info from SSIF cmd */
284 	unsigned char max_xmit_msg_size;
285 	unsigned char max_recv_msg_size;
286 	bool cmd8_works; /* See test_multipart_messages() for details. */
287 	unsigned int  multi_support;
288 	int           supports_pec;
289 
290 #define SSIF_NO_MULTI		0
291 #define SSIF_MULTI_2_PART	1
292 #define SSIF_MULTI_n_PART	2
293 	unsigned char *multi_data;
294 	unsigned int  multi_len;
295 	unsigned int  multi_pos;
296 
297 	atomic_t stats[SSIF_NUM_STATS];
298 };
299 
300 #define ssif_inc_stat(ssif, stat) \
301 	atomic_inc(&(ssif)->stats[SSIF_STAT_ ## stat])
302 #define ssif_get_stat(ssif, stat) \
303 	((unsigned int) atomic_read(&(ssif)->stats[SSIF_STAT_ ## stat]))
304 
305 static bool initialized;
306 
307 static void return_hosed_msg(struct ssif_info *ssif_info,
308 			     struct ipmi_smi_msg *msg);
309 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags);
310 static int start_send(struct ssif_info *ssif_info,
311 		      unsigned char   *data,
312 		      unsigned int    len);
313 
314 static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info,
315 					  unsigned long *flags)
316 {
317 	spin_lock_irqsave(&ssif_info->lock, *flags);
318 	return flags;
319 }
320 
321 static void ipmi_ssif_unlock_cond(struct ssif_info *ssif_info,
322 				  unsigned long *flags)
323 {
324 	spin_unlock_irqrestore(&ssif_info->lock, *flags);
325 }
326 
327 static void deliver_recv_msg(struct ssif_info *ssif_info,
328 			     struct ipmi_smi_msg *msg)
329 {
330 	if (msg->rsp_size < 0) {
331 		return_hosed_msg(ssif_info, msg);
332 		dev_err(&ssif_info->client->dev,
333 			"%s: Malformed message: rsp_size = %d\n",
334 		       __func__, msg->rsp_size);
335 	} else {
336 		ipmi_smi_msg_received(ssif_info->intf, msg);
337 	}
338 }
339 
340 static void return_hosed_msg(struct ssif_info *ssif_info,
341 			     struct ipmi_smi_msg *msg)
342 {
343 	ssif_inc_stat(ssif_info, hosed);
344 
345 	/* Make it a response */
346 	msg->rsp[0] = msg->data[0] | 4;
347 	msg->rsp[1] = msg->data[1];
348 	msg->rsp[2] = 0xFF; /* Unknown error. */
349 	msg->rsp_size = 3;
350 
351 	deliver_recv_msg(ssif_info, msg);
352 }
353 
354 /*
355  * Must be called with the message lock held.  This will release the
356  * message lock.  Note that the caller will check SSIF_IDLE and start a
357  * new operation, so there is no need to check for new messages to
358  * start in here.
359  */
360 static void start_clear_flags(struct ssif_info *ssif_info, unsigned long *flags)
361 {
362 	unsigned char msg[3];
363 
364 	ssif_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
365 	ssif_info->ssif_state = SSIF_CLEARING_FLAGS;
366 	ipmi_ssif_unlock_cond(ssif_info, flags);
367 
368 	/* Make sure the watchdog pre-timeout flag is not set at startup. */
369 	msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
370 	msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
371 	msg[2] = WDT_PRE_TIMEOUT_INT;
372 
373 	if (start_send(ssif_info, msg, 3) != 0) {
374 		/* Error, just go to normal state. */
375 		ssif_info->ssif_state = SSIF_NORMAL;
376 	}
377 }
378 
379 static void start_flag_fetch(struct ssif_info *ssif_info, unsigned long *flags)
380 {
381 	unsigned char mb[2];
382 
383 	ssif_info->req_flags = false;
384 	ssif_info->ssif_state = SSIF_GETTING_FLAGS;
385 	ipmi_ssif_unlock_cond(ssif_info, flags);
386 
387 	mb[0] = (IPMI_NETFN_APP_REQUEST << 2);
388 	mb[1] = IPMI_GET_MSG_FLAGS_CMD;
389 	if (start_send(ssif_info, mb, 2) != 0)
390 		ssif_info->ssif_state = SSIF_NORMAL;
391 }
392 
393 static void check_start_send(struct ssif_info *ssif_info, unsigned long *flags,
394 			     struct ipmi_smi_msg *msg)
395 {
396 	if (start_send(ssif_info, msg->data, msg->data_size) != 0) {
397 		unsigned long oflags;
398 
399 		flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
400 		ssif_info->curr_msg = NULL;
401 		ssif_info->ssif_state = SSIF_NORMAL;
402 		ipmi_ssif_unlock_cond(ssif_info, flags);
403 		ipmi_free_smi_msg(msg);
404 	}
405 }
406 
407 static void start_event_fetch(struct ssif_info *ssif_info, unsigned long *flags)
408 {
409 	struct ipmi_smi_msg *msg;
410 
411 	ssif_info->req_events = false;
412 
413 	msg = ipmi_alloc_smi_msg();
414 	if (!msg) {
415 		ssif_info->ssif_state = SSIF_NORMAL;
416 		ipmi_ssif_unlock_cond(ssif_info, flags);
417 		return;
418 	}
419 
420 	ssif_info->curr_msg = msg;
421 	ssif_info->ssif_state = SSIF_GETTING_EVENTS;
422 	ipmi_ssif_unlock_cond(ssif_info, flags);
423 
424 	msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
425 	msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
426 	msg->data_size = 2;
427 
428 	check_start_send(ssif_info, flags, msg);
429 }
430 
431 static void start_recv_msg_fetch(struct ssif_info *ssif_info,
432 				 unsigned long *flags)
433 {
434 	struct ipmi_smi_msg *msg;
435 
436 	msg = ipmi_alloc_smi_msg();
437 	if (!msg) {
438 		ssif_info->ssif_state = SSIF_NORMAL;
439 		ipmi_ssif_unlock_cond(ssif_info, flags);
440 		return;
441 	}
442 
443 	ssif_info->curr_msg = msg;
444 	ssif_info->ssif_state = SSIF_GETTING_MESSAGES;
445 	ipmi_ssif_unlock_cond(ssif_info, flags);
446 
447 	msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
448 	msg->data[1] = IPMI_GET_MSG_CMD;
449 	msg->data_size = 2;
450 
451 	check_start_send(ssif_info, flags, msg);
452 }
453 
454 /*
455  * Must be called with the message lock held.  This will release the
456  * message lock.  Note that the caller will check SSIF_IDLE and start a
457  * new operation, so there is no need to check for new messages to
458  * start in here.
459  */
460 static void handle_flags(struct ssif_info *ssif_info, unsigned long *flags)
461 {
462 	if (ssif_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
463 		/* Watchdog pre-timeout */
464 		ssif_inc_stat(ssif_info, watchdog_pretimeouts);
465 		start_clear_flags(ssif_info, flags);
466 		ipmi_smi_watchdog_pretimeout(ssif_info->intf);
467 	} else if (ssif_info->msg_flags & RECEIVE_MSG_AVAIL)
468 		/* Messages available. */
469 		start_recv_msg_fetch(ssif_info, flags);
470 	else if (ssif_info->msg_flags & EVENT_MSG_BUFFER_FULL)
471 		/* Events available. */
472 		start_event_fetch(ssif_info, flags);
473 	else {
474 		ssif_info->ssif_state = SSIF_NORMAL;
475 		ipmi_ssif_unlock_cond(ssif_info, flags);
476 	}
477 }
478 
479 static int ipmi_ssif_thread(void *data)
480 {
481 	struct ssif_info *ssif_info = data;
482 
483 	while (!kthread_should_stop()) {
484 		int result;
485 
486 		/* Wait for something to do */
487 		result = wait_for_completion_interruptible(
488 						&ssif_info->wake_thread);
489 		if (ssif_info->stopping)
490 			break;
491 		if (result == -ERESTARTSYS)
492 			continue;
493 		init_completion(&ssif_info->wake_thread);
494 
495 		if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) {
496 			result = i2c_smbus_write_block_data(
497 				ssif_info->client, ssif_info->i2c_command,
498 				ssif_info->i2c_data[0],
499 				ssif_info->i2c_data + 1);
500 			ssif_info->done_handler(ssif_info, result, NULL, 0);
501 		} else {
502 			result = i2c_smbus_read_block_data(
503 				ssif_info->client, ssif_info->i2c_command,
504 				ssif_info->i2c_data);
505 			if (result < 0)
506 				ssif_info->done_handler(ssif_info, result,
507 							NULL, 0);
508 			else
509 				ssif_info->done_handler(ssif_info, 0,
510 							ssif_info->i2c_data,
511 							result);
512 		}
513 	}
514 
515 	return 0;
516 }
517 
518 static int ssif_i2c_send(struct ssif_info *ssif_info,
519 			ssif_i2c_done handler,
520 			int read_write, int command,
521 			unsigned char *data, unsigned int size)
522 {
523 	ssif_info->done_handler = handler;
524 
525 	ssif_info->i2c_read_write = read_write;
526 	ssif_info->i2c_command = command;
527 	ssif_info->i2c_data = data;
528 	ssif_info->i2c_size = size;
529 	complete(&ssif_info->wake_thread);
530 	return 0;
531 }
532 
533 
534 static void msg_done_handler(struct ssif_info *ssif_info, int result,
535 			     unsigned char *data, unsigned int len);
536 
537 static void start_get(struct ssif_info *ssif_info)
538 {
539 	int rv;
540 
541 	ssif_info->rtc_us_timer = 0;
542 	ssif_info->multi_pos = 0;
543 
544 	rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
545 			  SSIF_IPMI_RESPONSE,
546 			  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
547 	if (rv < 0) {
548 		/* request failed, just return the error. */
549 		if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
550 			dev_dbg(&ssif_info->client->dev,
551 				"Error from i2c_non_blocking_op(5)\n");
552 
553 		msg_done_handler(ssif_info, -EIO, NULL, 0);
554 	}
555 }
556 
557 static void retry_timeout(struct timer_list *t)
558 {
559 	struct ssif_info *ssif_info = from_timer(ssif_info, t, retry_timer);
560 	unsigned long oflags, *flags;
561 	bool waiting;
562 
563 	if (ssif_info->stopping)
564 		return;
565 
566 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
567 	waiting = ssif_info->waiting_alert;
568 	ssif_info->waiting_alert = false;
569 	ipmi_ssif_unlock_cond(ssif_info, flags);
570 
571 	if (waiting)
572 		start_get(ssif_info);
573 }
574 
575 static void watch_timeout(struct timer_list *t)
576 {
577 	struct ssif_info *ssif_info = from_timer(ssif_info, t, watch_timer);
578 	unsigned long oflags, *flags;
579 
580 	if (ssif_info->stopping)
581 		return;
582 
583 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
584 	if (ssif_info->watch_timeout) {
585 		mod_timer(&ssif_info->watch_timer,
586 			  jiffies + ssif_info->watch_timeout);
587 		if (SSIF_IDLE(ssif_info)) {
588 			start_flag_fetch(ssif_info, flags); /* Releases lock */
589 			return;
590 		}
591 		ssif_info->req_flags = true;
592 	}
593 	ipmi_ssif_unlock_cond(ssif_info, flags);
594 }
595 
596 static void ssif_alert(struct i2c_client *client, enum i2c_alert_protocol type,
597 		       unsigned int data)
598 {
599 	struct ssif_info *ssif_info = i2c_get_clientdata(client);
600 	unsigned long oflags, *flags;
601 	bool do_get = false;
602 
603 	if (type != I2C_PROTOCOL_SMBUS_ALERT)
604 		return;
605 
606 	ssif_inc_stat(ssif_info, alerts);
607 
608 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
609 	if (ssif_info->waiting_alert) {
610 		ssif_info->waiting_alert = false;
611 		del_timer(&ssif_info->retry_timer);
612 		do_get = true;
613 	} else if (ssif_info->curr_msg) {
614 		ssif_info->got_alert = true;
615 	}
616 	ipmi_ssif_unlock_cond(ssif_info, flags);
617 	if (do_get)
618 		start_get(ssif_info);
619 }
620 
621 static int start_resend(struct ssif_info *ssif_info);
622 
623 static void msg_done_handler(struct ssif_info *ssif_info, int result,
624 			     unsigned char *data, unsigned int len)
625 {
626 	struct ipmi_smi_msg *msg;
627 	unsigned long oflags, *flags;
628 	int rv;
629 
630 	/*
631 	 * We are single-threaded here, so no need for a lock until we
632 	 * start messing with driver states or the queues.
633 	 */
634 
635 	if (result < 0) {
636 		ssif_info->retries_left--;
637 		if (ssif_info->retries_left > 0) {
638 			ssif_inc_stat(ssif_info, receive_retries);
639 
640 			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
641 			ssif_info->waiting_alert = true;
642 			ssif_info->rtc_us_timer = SSIF_MSG_USEC;
643 			if (!ssif_info->stopping)
644 				mod_timer(&ssif_info->retry_timer,
645 					  jiffies + SSIF_MSG_JIFFIES);
646 			ipmi_ssif_unlock_cond(ssif_info, flags);
647 			return;
648 		}
649 
650 		ssif_inc_stat(ssif_info, receive_errors);
651 
652 		if  (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
653 			dev_dbg(&ssif_info->client->dev,
654 				"%s: Error %d\n", __func__, result);
655 		len = 0;
656 		goto continue_op;
657 	}
658 
659 	if ((len > 1) && (ssif_info->multi_pos == 0)
660 				&& (data[0] == 0x00) && (data[1] == 0x01)) {
661 		/* Start of multi-part read.  Start the next transaction. */
662 		int i;
663 
664 		ssif_inc_stat(ssif_info, received_message_parts);
665 
666 		/* Remove the multi-part read marker. */
667 		len -= 2;
668 		data += 2;
669 		for (i = 0; i < len; i++)
670 			ssif_info->data[i] = data[i];
671 		ssif_info->multi_len = len;
672 		ssif_info->multi_pos = 1;
673 
674 		rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
675 				  SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
676 				  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
677 		if (rv < 0) {
678 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
679 				dev_dbg(&ssif_info->client->dev,
680 					"Error from i2c_non_blocking_op(1)\n");
681 
682 			result = -EIO;
683 		} else
684 			return;
685 	} else if (ssif_info->multi_pos) {
686 		/* Middle of multi-part read.  Start the next transaction. */
687 		int i;
688 		unsigned char blocknum;
689 
690 		if (len == 0) {
691 			result = -EIO;
692 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
693 				dev_dbg(&ssif_info->client->dev,
694 					"Middle message with no data\n");
695 
696 			goto continue_op;
697 		}
698 
699 		blocknum = data[0];
700 		len--;
701 		data++;
702 
703 		if (blocknum != 0xff && len != 31) {
704 		    /* All blocks but the last must have 31 data bytes. */
705 			result = -EIO;
706 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
707 				dev_dbg(&ssif_info->client->dev,
708 					"Received middle message <31\n");
709 
710 			goto continue_op;
711 		}
712 
713 		if (ssif_info->multi_len + len > IPMI_MAX_MSG_LENGTH) {
714 			/* Received message too big, abort the operation. */
715 			result = -E2BIG;
716 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
717 				dev_dbg(&ssif_info->client->dev,
718 					"Received message too big\n");
719 
720 			goto continue_op;
721 		}
722 
723 		for (i = 0; i < len; i++)
724 			ssif_info->data[i + ssif_info->multi_len] = data[i];
725 		ssif_info->multi_len += len;
726 		if (blocknum == 0xff) {
727 			/* End of read */
728 			len = ssif_info->multi_len;
729 			data = ssif_info->data;
730 		} else if (blocknum + 1 != ssif_info->multi_pos) {
731 			/*
732 			 * Out of sequence block, just abort.  Block
733 			 * numbers start at zero for the second block,
734 			 * but multi_pos starts at one, so the +1.
735 			 */
736 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
737 				dev_dbg(&ssif_info->client->dev,
738 					"Received message out of sequence, expected %u, got %u\n",
739 					ssif_info->multi_pos - 1, blocknum);
740 			result = -EIO;
741 		} else {
742 			ssif_inc_stat(ssif_info, received_message_parts);
743 
744 			ssif_info->multi_pos++;
745 
746 			rv = ssif_i2c_send(ssif_info, msg_done_handler,
747 					   I2C_SMBUS_READ,
748 					   SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
749 					   ssif_info->recv,
750 					   I2C_SMBUS_BLOCK_DATA);
751 			if (rv < 0) {
752 				if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
753 					dev_dbg(&ssif_info->client->dev,
754 						"Error from ssif_i2c_send\n");
755 
756 				result = -EIO;
757 			} else
758 				return;
759 		}
760 	}
761 
762  continue_op:
763 	if (result < 0) {
764 		ssif_inc_stat(ssif_info, receive_errors);
765 	} else {
766 		ssif_inc_stat(ssif_info, received_messages);
767 		ssif_inc_stat(ssif_info, received_message_parts);
768 	}
769 
770 	if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
771 		dev_dbg(&ssif_info->client->dev,
772 			"DONE 1: state = %d, result=%d\n",
773 			ssif_info->ssif_state, result);
774 
775 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
776 	msg = ssif_info->curr_msg;
777 	if (msg) {
778 		msg->rsp_size = len;
779 		if (msg->rsp_size > IPMI_MAX_MSG_LENGTH)
780 			msg->rsp_size = IPMI_MAX_MSG_LENGTH;
781 		memcpy(msg->rsp, data, msg->rsp_size);
782 		ssif_info->curr_msg = NULL;
783 	}
784 
785 	switch (ssif_info->ssif_state) {
786 	case SSIF_NORMAL:
787 		ipmi_ssif_unlock_cond(ssif_info, flags);
788 		if (!msg)
789 			break;
790 
791 		if (result < 0)
792 			return_hosed_msg(ssif_info, msg);
793 		else
794 			deliver_recv_msg(ssif_info, msg);
795 		break;
796 
797 	case SSIF_GETTING_FLAGS:
798 		/* We got the flags from the SSIF, now handle them. */
799 		if ((result < 0) || (len < 4) || (data[2] != 0)) {
800 			/*
801 			 * Error fetching flags, or invalid length,
802 			 * just give up for now.
803 			 */
804 			ssif_info->ssif_state = SSIF_NORMAL;
805 			ipmi_ssif_unlock_cond(ssif_info, flags);
806 			dev_warn(&ssif_info->client->dev,
807 				 "Error getting flags: %d %d, %x\n",
808 				 result, len, (len >= 3) ? data[2] : 0);
809 		} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
810 			   || data[1] != IPMI_GET_MSG_FLAGS_CMD) {
811 			/*
812 			 * Don't abort here, maybe it was a queued
813 			 * response to a previous command.
814 			 */
815 			ipmi_ssif_unlock_cond(ssif_info, flags);
816 			dev_warn(&ssif_info->client->dev,
817 				 "Invalid response getting flags: %x %x\n",
818 				 data[0], data[1]);
819 		} else {
820 			ssif_inc_stat(ssif_info, flag_fetches);
821 			ssif_info->msg_flags = data[3];
822 			handle_flags(ssif_info, flags);
823 		}
824 		break;
825 
826 	case SSIF_CLEARING_FLAGS:
827 		/* We cleared the flags. */
828 		if ((result < 0) || (len < 3) || (data[2] != 0)) {
829 			/* Error clearing flags */
830 			dev_warn(&ssif_info->client->dev,
831 				 "Error clearing flags: %d %d, %x\n",
832 				 result, len, (len >= 3) ? data[2] : 0);
833 		} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
834 			   || data[1] != IPMI_CLEAR_MSG_FLAGS_CMD) {
835 			dev_warn(&ssif_info->client->dev,
836 				 "Invalid response clearing flags: %x %x\n",
837 				 data[0], data[1]);
838 		}
839 		ssif_info->ssif_state = SSIF_NORMAL;
840 		ipmi_ssif_unlock_cond(ssif_info, flags);
841 		break;
842 
843 	case SSIF_GETTING_EVENTS:
844 		if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
845 			/* Error getting event, probably done. */
846 			msg->done(msg);
847 
848 			/* Take off the event flag. */
849 			ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
850 			handle_flags(ssif_info, flags);
851 		} else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
852 			   || msg->rsp[1] != IPMI_READ_EVENT_MSG_BUFFER_CMD) {
853 			dev_warn(&ssif_info->client->dev,
854 				 "Invalid response getting events: %x %x\n",
855 				 msg->rsp[0], msg->rsp[1]);
856 			msg->done(msg);
857 			/* Take off the event flag. */
858 			ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
859 			handle_flags(ssif_info, flags);
860 		} else {
861 			handle_flags(ssif_info, flags);
862 			ssif_inc_stat(ssif_info, events);
863 			deliver_recv_msg(ssif_info, msg);
864 		}
865 		break;
866 
867 	case SSIF_GETTING_MESSAGES:
868 		if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
869 			/* Error getting event, probably done. */
870 			msg->done(msg);
871 
872 			/* Take off the msg flag. */
873 			ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
874 			handle_flags(ssif_info, flags);
875 		} else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
876 			   || msg->rsp[1] != IPMI_GET_MSG_CMD) {
877 			dev_warn(&ssif_info->client->dev,
878 				 "Invalid response clearing flags: %x %x\n",
879 				 msg->rsp[0], msg->rsp[1]);
880 			msg->done(msg);
881 
882 			/* Take off the msg flag. */
883 			ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
884 			handle_flags(ssif_info, flags);
885 		} else {
886 			ssif_inc_stat(ssif_info, incoming_messages);
887 			handle_flags(ssif_info, flags);
888 			deliver_recv_msg(ssif_info, msg);
889 		}
890 		break;
891 	}
892 
893 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
894 	if (SSIF_IDLE(ssif_info) && !ssif_info->stopping) {
895 		if (ssif_info->req_events)
896 			start_event_fetch(ssif_info, flags);
897 		else if (ssif_info->req_flags)
898 			start_flag_fetch(ssif_info, flags);
899 		else
900 			start_next_msg(ssif_info, flags);
901 	} else
902 		ipmi_ssif_unlock_cond(ssif_info, flags);
903 
904 	if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
905 		dev_dbg(&ssif_info->client->dev,
906 			"DONE 2: state = %d.\n", ssif_info->ssif_state);
907 }
908 
909 static void msg_written_handler(struct ssif_info *ssif_info, int result,
910 				unsigned char *data, unsigned int len)
911 {
912 	int rv;
913 
914 	/* We are single-threaded here, so no need for a lock. */
915 	if (result < 0) {
916 		ssif_info->retries_left--;
917 		if (ssif_info->retries_left > 0) {
918 			if (!start_resend(ssif_info)) {
919 				ssif_inc_stat(ssif_info, send_retries);
920 				return;
921 			}
922 			/* request failed, just return the error. */
923 			ssif_inc_stat(ssif_info, send_errors);
924 
925 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
926 				dev_dbg(&ssif_info->client->dev,
927 					"%s: Out of retries\n", __func__);
928 			msg_done_handler(ssif_info, -EIO, NULL, 0);
929 			return;
930 		}
931 
932 		ssif_inc_stat(ssif_info, send_errors);
933 
934 		/*
935 		 * Got an error on transmit, let the done routine
936 		 * handle it.
937 		 */
938 		if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
939 			dev_dbg(&ssif_info->client->dev,
940 				"%s: Error  %d\n", __func__, result);
941 
942 		msg_done_handler(ssif_info, result, NULL, 0);
943 		return;
944 	}
945 
946 	if (ssif_info->multi_data) {
947 		/*
948 		 * In the middle of a multi-data write.  See the comment
949 		 * in the SSIF_MULTI_n_PART case in the probe function
950 		 * for details on the intricacies of this.
951 		 */
952 		int left, to_write;
953 		unsigned char *data_to_send;
954 		unsigned char cmd;
955 
956 		ssif_inc_stat(ssif_info, sent_messages_parts);
957 
958 		left = ssif_info->multi_len - ssif_info->multi_pos;
959 		to_write = left;
960 		if (to_write > 32)
961 			to_write = 32;
962 		/* Length byte. */
963 		ssif_info->multi_data[ssif_info->multi_pos] = to_write;
964 		data_to_send = ssif_info->multi_data + ssif_info->multi_pos;
965 		ssif_info->multi_pos += to_write;
966 		cmd = SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE;
967 		if (ssif_info->cmd8_works) {
968 			if (left == to_write) {
969 				cmd = SSIF_IPMI_MULTI_PART_REQUEST_END;
970 				ssif_info->multi_data = NULL;
971 			}
972 		} else if (to_write < 32) {
973 			ssif_info->multi_data = NULL;
974 		}
975 
976 		rv = ssif_i2c_send(ssif_info, msg_written_handler,
977 				   I2C_SMBUS_WRITE, cmd,
978 				   data_to_send, I2C_SMBUS_BLOCK_DATA);
979 		if (rv < 0) {
980 			/* request failed, just return the error. */
981 			ssif_inc_stat(ssif_info, send_errors);
982 
983 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
984 				dev_dbg(&ssif_info->client->dev,
985 					"Error from i2c_non_blocking_op(3)\n");
986 			msg_done_handler(ssif_info, -EIO, NULL, 0);
987 		}
988 	} else {
989 		/* Ready to request the result. */
990 		unsigned long oflags, *flags;
991 
992 		ssif_inc_stat(ssif_info, sent_messages);
993 		ssif_inc_stat(ssif_info, sent_messages_parts);
994 
995 		flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
996 		if (ssif_info->got_alert) {
997 			/* The result is already ready, just start it. */
998 			ssif_info->got_alert = false;
999 			ipmi_ssif_unlock_cond(ssif_info, flags);
1000 			start_get(ssif_info);
1001 		} else {
1002 			/* Wait a jiffie then request the next message */
1003 			ssif_info->waiting_alert = true;
1004 			ssif_info->retries_left = SSIF_RECV_RETRIES;
1005 			ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
1006 			if (!ssif_info->stopping)
1007 				mod_timer(&ssif_info->retry_timer,
1008 					  jiffies + SSIF_MSG_PART_JIFFIES);
1009 			ipmi_ssif_unlock_cond(ssif_info, flags);
1010 		}
1011 	}
1012 }
1013 
1014 static int start_resend(struct ssif_info *ssif_info)
1015 {
1016 	int rv;
1017 	int command;
1018 
1019 	ssif_info->got_alert = false;
1020 
1021 	if (ssif_info->data_len > 32) {
1022 		command = SSIF_IPMI_MULTI_PART_REQUEST_START;
1023 		ssif_info->multi_data = ssif_info->data;
1024 		ssif_info->multi_len = ssif_info->data_len;
1025 		/*
1026 		 * Subtle thing, this is 32, not 33, because we will
1027 		 * overwrite the thing at position 32 (which was just
1028 		 * transmitted) with the new length.
1029 		 */
1030 		ssif_info->multi_pos = 32;
1031 		ssif_info->data[0] = 32;
1032 	} else {
1033 		ssif_info->multi_data = NULL;
1034 		command = SSIF_IPMI_REQUEST;
1035 		ssif_info->data[0] = ssif_info->data_len;
1036 	}
1037 
1038 	rv = ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE,
1039 			  command, ssif_info->data, I2C_SMBUS_BLOCK_DATA);
1040 	if (rv && (ssif_info->ssif_debug & SSIF_DEBUG_MSG))
1041 		dev_dbg(&ssif_info->client->dev,
1042 			"Error from i2c_non_blocking_op(4)\n");
1043 	return rv;
1044 }
1045 
1046 static int start_send(struct ssif_info *ssif_info,
1047 		      unsigned char   *data,
1048 		      unsigned int    len)
1049 {
1050 	if (len > IPMI_MAX_MSG_LENGTH)
1051 		return -E2BIG;
1052 	if (len > ssif_info->max_xmit_msg_size)
1053 		return -E2BIG;
1054 
1055 	ssif_info->retries_left = SSIF_SEND_RETRIES;
1056 	memcpy(ssif_info->data + 1, data, len);
1057 	ssif_info->data_len = len;
1058 	return start_resend(ssif_info);
1059 }
1060 
1061 /* Must be called with the message lock held. */
1062 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags)
1063 {
1064 	struct ipmi_smi_msg *msg;
1065 	unsigned long oflags;
1066 
1067  restart:
1068 	if (!SSIF_IDLE(ssif_info)) {
1069 		ipmi_ssif_unlock_cond(ssif_info, flags);
1070 		return;
1071 	}
1072 
1073 	if (!ssif_info->waiting_msg) {
1074 		ssif_info->curr_msg = NULL;
1075 		ipmi_ssif_unlock_cond(ssif_info, flags);
1076 	} else {
1077 		int rv;
1078 
1079 		ssif_info->curr_msg = ssif_info->waiting_msg;
1080 		ssif_info->waiting_msg = NULL;
1081 		ipmi_ssif_unlock_cond(ssif_info, flags);
1082 		rv = start_send(ssif_info,
1083 				ssif_info->curr_msg->data,
1084 				ssif_info->curr_msg->data_size);
1085 		if (rv) {
1086 			msg = ssif_info->curr_msg;
1087 			ssif_info->curr_msg = NULL;
1088 			return_hosed_msg(ssif_info, msg);
1089 			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1090 			goto restart;
1091 		}
1092 	}
1093 }
1094 
1095 static void sender(void                *send_info,
1096 		   struct ipmi_smi_msg *msg)
1097 {
1098 	struct ssif_info *ssif_info = (struct ssif_info *) send_info;
1099 	unsigned long oflags, *flags;
1100 
1101 	BUG_ON(ssif_info->waiting_msg);
1102 	ssif_info->waiting_msg = msg;
1103 
1104 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1105 	start_next_msg(ssif_info, flags);
1106 
1107 	if (ssif_info->ssif_debug & SSIF_DEBUG_TIMING) {
1108 		struct timespec64 t;
1109 
1110 		ktime_get_real_ts64(&t);
1111 		dev_dbg(&ssif_info->client->dev,
1112 			"**Enqueue %02x %02x: %lld.%6.6ld\n",
1113 			msg->data[0], msg->data[1],
1114 			(long long)t.tv_sec, (long)t.tv_nsec / NSEC_PER_USEC);
1115 	}
1116 }
1117 
1118 static int get_smi_info(void *send_info, struct ipmi_smi_info *data)
1119 {
1120 	struct ssif_info *ssif_info = send_info;
1121 
1122 	data->addr_src = ssif_info->addr_source;
1123 	data->dev = &ssif_info->client->dev;
1124 	data->addr_info = ssif_info->addr_info;
1125 	get_device(data->dev);
1126 
1127 	return 0;
1128 }
1129 
1130 /*
1131  * Upper layer wants us to request events.
1132  */
1133 static void request_events(void *send_info)
1134 {
1135 	struct ssif_info *ssif_info = (struct ssif_info *) send_info;
1136 	unsigned long oflags, *flags;
1137 
1138 	if (!ssif_info->has_event_buffer)
1139 		return;
1140 
1141 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1142 	ssif_info->req_events = true;
1143 	ipmi_ssif_unlock_cond(ssif_info, flags);
1144 }
1145 
1146 /*
1147  * Upper layer is changing the flag saying whether we need to request
1148  * flags periodically or not.
1149  */
1150 static void ssif_set_need_watch(void *send_info, unsigned int watch_mask)
1151 {
1152 	struct ssif_info *ssif_info = (struct ssif_info *) send_info;
1153 	unsigned long oflags, *flags;
1154 	long timeout = 0;
1155 
1156 	if (watch_mask & IPMI_WATCH_MASK_CHECK_MESSAGES)
1157 		timeout = SSIF_WATCH_MSG_TIMEOUT;
1158 	else if (watch_mask)
1159 		timeout = SSIF_WATCH_WATCHDOG_TIMEOUT;
1160 
1161 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
1162 	if (timeout != ssif_info->watch_timeout) {
1163 		ssif_info->watch_timeout = timeout;
1164 		if (ssif_info->watch_timeout)
1165 			mod_timer(&ssif_info->watch_timer,
1166 				  jiffies + ssif_info->watch_timeout);
1167 	}
1168 	ipmi_ssif_unlock_cond(ssif_info, flags);
1169 }
1170 
1171 static int ssif_start_processing(void            *send_info,
1172 				 struct ipmi_smi *intf)
1173 {
1174 	struct ssif_info *ssif_info = send_info;
1175 
1176 	ssif_info->intf = intf;
1177 
1178 	return 0;
1179 }
1180 
1181 #define MAX_SSIF_BMCS 4
1182 
1183 static unsigned short addr[MAX_SSIF_BMCS];
1184 static int num_addrs;
1185 module_param_array(addr, ushort, &num_addrs, 0);
1186 MODULE_PARM_DESC(addr, "The addresses to scan for IPMI BMCs on the SSIFs.");
1187 
1188 static char *adapter_name[MAX_SSIF_BMCS];
1189 static int num_adapter_names;
1190 module_param_array(adapter_name, charp, &num_adapter_names, 0);
1191 MODULE_PARM_DESC(adapter_name, "The string name of the I2C device that has the BMC.  By default all devices are scanned.");
1192 
1193 static int slave_addrs[MAX_SSIF_BMCS];
1194 static int num_slave_addrs;
1195 module_param_array(slave_addrs, int, &num_slave_addrs, 0);
1196 MODULE_PARM_DESC(slave_addrs,
1197 		 "The default IPMB slave address for the controller.");
1198 
1199 static bool alerts_broken;
1200 module_param(alerts_broken, bool, 0);
1201 MODULE_PARM_DESC(alerts_broken, "Don't enable alerts for the controller.");
1202 
1203 /*
1204  * Bit 0 enables message debugging, bit 1 enables state debugging, and
1205  * bit 2 enables timing debugging.  This is an array indexed by
1206  * interface number"
1207  */
1208 static int dbg[MAX_SSIF_BMCS];
1209 static int num_dbg;
1210 module_param_array(dbg, int, &num_dbg, 0);
1211 MODULE_PARM_DESC(dbg, "Turn on debugging.");
1212 
1213 static bool ssif_dbg_probe;
1214 module_param_named(dbg_probe, ssif_dbg_probe, bool, 0);
1215 MODULE_PARM_DESC(dbg_probe, "Enable debugging of probing of adapters.");
1216 
1217 static bool ssif_tryacpi = true;
1218 module_param_named(tryacpi, ssif_tryacpi, bool, 0);
1219 MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the default scan of the interfaces identified via ACPI");
1220 
1221 static bool ssif_trydmi = true;
1222 module_param_named(trydmi, ssif_trydmi, bool, 0);
1223 MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the default scan of the interfaces identified via DMI (SMBIOS)");
1224 
1225 static DEFINE_MUTEX(ssif_infos_mutex);
1226 static LIST_HEAD(ssif_infos);
1227 
1228 #define IPMI_SSIF_ATTR(name) \
1229 static ssize_t ipmi_##name##_show(struct device *dev,			\
1230 				  struct device_attribute *attr,	\
1231 				  char *buf)				\
1232 {									\
1233 	struct ssif_info *ssif_info = dev_get_drvdata(dev);		\
1234 									\
1235 	return snprintf(buf, 10, "%u\n", ssif_get_stat(ssif_info, name));\
1236 }									\
1237 static DEVICE_ATTR(name, S_IRUGO, ipmi_##name##_show, NULL)
1238 
1239 static ssize_t ipmi_type_show(struct device *dev,
1240 			      struct device_attribute *attr,
1241 			      char *buf)
1242 {
1243 	return snprintf(buf, 10, "ssif\n");
1244 }
1245 static DEVICE_ATTR(type, S_IRUGO, ipmi_type_show, NULL);
1246 
1247 IPMI_SSIF_ATTR(sent_messages);
1248 IPMI_SSIF_ATTR(sent_messages_parts);
1249 IPMI_SSIF_ATTR(send_retries);
1250 IPMI_SSIF_ATTR(send_errors);
1251 IPMI_SSIF_ATTR(received_messages);
1252 IPMI_SSIF_ATTR(received_message_parts);
1253 IPMI_SSIF_ATTR(receive_retries);
1254 IPMI_SSIF_ATTR(receive_errors);
1255 IPMI_SSIF_ATTR(flag_fetches);
1256 IPMI_SSIF_ATTR(hosed);
1257 IPMI_SSIF_ATTR(events);
1258 IPMI_SSIF_ATTR(watchdog_pretimeouts);
1259 IPMI_SSIF_ATTR(alerts);
1260 
1261 static struct attribute *ipmi_ssif_dev_attrs[] = {
1262 	&dev_attr_type.attr,
1263 	&dev_attr_sent_messages.attr,
1264 	&dev_attr_sent_messages_parts.attr,
1265 	&dev_attr_send_retries.attr,
1266 	&dev_attr_send_errors.attr,
1267 	&dev_attr_received_messages.attr,
1268 	&dev_attr_received_message_parts.attr,
1269 	&dev_attr_receive_retries.attr,
1270 	&dev_attr_receive_errors.attr,
1271 	&dev_attr_flag_fetches.attr,
1272 	&dev_attr_hosed.attr,
1273 	&dev_attr_events.attr,
1274 	&dev_attr_watchdog_pretimeouts.attr,
1275 	&dev_attr_alerts.attr,
1276 	NULL
1277 };
1278 
1279 static const struct attribute_group ipmi_ssif_dev_attr_group = {
1280 	.attrs		= ipmi_ssif_dev_attrs,
1281 };
1282 
1283 static void shutdown_ssif(void *send_info)
1284 {
1285 	struct ssif_info *ssif_info = send_info;
1286 
1287 	device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group);
1288 	dev_set_drvdata(&ssif_info->client->dev, NULL);
1289 
1290 	/* make sure the driver is not looking for flags any more. */
1291 	while (ssif_info->ssif_state != SSIF_NORMAL)
1292 		schedule_timeout(1);
1293 
1294 	ssif_info->stopping = true;
1295 	del_timer_sync(&ssif_info->watch_timer);
1296 	del_timer_sync(&ssif_info->retry_timer);
1297 	if (ssif_info->thread) {
1298 		complete(&ssif_info->wake_thread);
1299 		kthread_stop(ssif_info->thread);
1300 	}
1301 }
1302 
1303 static int ssif_remove(struct i2c_client *client)
1304 {
1305 	struct ssif_info *ssif_info = i2c_get_clientdata(client);
1306 	struct ssif_addr_info *addr_info;
1307 
1308 	if (!ssif_info)
1309 		return 0;
1310 
1311 	/*
1312 	 * After this point, we won't deliver anything asychronously
1313 	 * to the message handler.  We can unregister ourself.
1314 	 */
1315 	ipmi_unregister_smi(ssif_info->intf);
1316 
1317 	list_for_each_entry(addr_info, &ssif_infos, link) {
1318 		if (addr_info->client == client) {
1319 			addr_info->client = NULL;
1320 			break;
1321 		}
1322 	}
1323 
1324 	kfree(ssif_info);
1325 
1326 	return 0;
1327 }
1328 
1329 static int read_response(struct i2c_client *client, unsigned char *resp)
1330 {
1331 	int ret = -ENODEV, retry_cnt = SSIF_RECV_RETRIES;
1332 
1333 	while (retry_cnt > 0) {
1334 		ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE,
1335 						resp);
1336 		if (ret > 0)
1337 			break;
1338 		msleep(SSIF_MSG_MSEC);
1339 		retry_cnt--;
1340 		if (retry_cnt <= 0)
1341 			break;
1342 	}
1343 
1344 	return ret;
1345 }
1346 
1347 static int do_cmd(struct i2c_client *client, int len, unsigned char *msg,
1348 		  int *resp_len, unsigned char *resp)
1349 {
1350 	int retry_cnt;
1351 	int ret;
1352 
1353 	retry_cnt = SSIF_SEND_RETRIES;
1354  retry1:
1355 	ret = i2c_smbus_write_block_data(client, SSIF_IPMI_REQUEST, len, msg);
1356 	if (ret) {
1357 		retry_cnt--;
1358 		if (retry_cnt > 0)
1359 			goto retry1;
1360 		return -ENODEV;
1361 	}
1362 
1363 	ret = read_response(client, resp);
1364 	if (ret > 0) {
1365 		/* Validate that the response is correct. */
1366 		if (ret < 3 ||
1367 		    (resp[0] != (msg[0] | (1 << 2))) ||
1368 		    (resp[1] != msg[1]))
1369 			ret = -EINVAL;
1370 		else if (ret > IPMI_MAX_MSG_LENGTH) {
1371 			ret = -E2BIG;
1372 		} else {
1373 			*resp_len = ret;
1374 			ret = 0;
1375 		}
1376 	}
1377 
1378 	return ret;
1379 }
1380 
1381 static int ssif_detect(struct i2c_client *client, struct i2c_board_info *info)
1382 {
1383 	unsigned char *resp;
1384 	unsigned char msg[3];
1385 	int           rv;
1386 	int           len;
1387 
1388 	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
1389 	if (!resp)
1390 		return -ENOMEM;
1391 
1392 	/* Do a Get Device ID command, since it is required. */
1393 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1394 	msg[1] = IPMI_GET_DEVICE_ID_CMD;
1395 	rv = do_cmd(client, 2, msg, &len, resp);
1396 	if (rv)
1397 		rv = -ENODEV;
1398 	else
1399 		strlcpy(info->type, DEVICE_NAME, I2C_NAME_SIZE);
1400 	kfree(resp);
1401 	return rv;
1402 }
1403 
1404 static int strcmp_nospace(char *s1, char *s2)
1405 {
1406 	while (*s1 && *s2) {
1407 		while (isspace(*s1))
1408 			s1++;
1409 		while (isspace(*s2))
1410 			s2++;
1411 		if (*s1 > *s2)
1412 			return 1;
1413 		if (*s1 < *s2)
1414 			return -1;
1415 		s1++;
1416 		s2++;
1417 	}
1418 	return 0;
1419 }
1420 
1421 static struct ssif_addr_info *ssif_info_find(unsigned short addr,
1422 					     char *adapter_name,
1423 					     bool match_null_name)
1424 {
1425 	struct ssif_addr_info *info, *found = NULL;
1426 
1427 restart:
1428 	list_for_each_entry(info, &ssif_infos, link) {
1429 		if (info->binfo.addr == addr) {
1430 			if (info->adapter_name || adapter_name) {
1431 				if (!info->adapter_name != !adapter_name) {
1432 					/* One is NULL and one is not */
1433 					continue;
1434 				}
1435 				if (adapter_name &&
1436 				    strcmp_nospace(info->adapter_name,
1437 						   adapter_name))
1438 					/* Names do not match */
1439 					continue;
1440 			}
1441 			found = info;
1442 			break;
1443 		}
1444 	}
1445 
1446 	if (!found && match_null_name) {
1447 		/* Try to get an exact match first, then try with a NULL name */
1448 		adapter_name = NULL;
1449 		match_null_name = false;
1450 		goto restart;
1451 	}
1452 
1453 	return found;
1454 }
1455 
1456 static bool check_acpi(struct ssif_info *ssif_info, struct device *dev)
1457 {
1458 #ifdef CONFIG_ACPI
1459 	acpi_handle acpi_handle;
1460 
1461 	acpi_handle = ACPI_HANDLE(dev);
1462 	if (acpi_handle) {
1463 		ssif_info->addr_source = SI_ACPI;
1464 		ssif_info->addr_info.acpi_info.acpi_handle = acpi_handle;
1465 		return true;
1466 	}
1467 #endif
1468 	return false;
1469 }
1470 
1471 static int find_slave_address(struct i2c_client *client, int slave_addr)
1472 {
1473 #ifdef CONFIG_IPMI_DMI_DECODE
1474 	if (!slave_addr)
1475 		slave_addr = ipmi_dmi_get_slave_addr(
1476 			SI_TYPE_INVALID,
1477 			i2c_adapter_id(client->adapter),
1478 			client->addr);
1479 #endif
1480 
1481 	return slave_addr;
1482 }
1483 
1484 static int start_multipart_test(struct i2c_client *client,
1485 				unsigned char *msg, bool do_middle)
1486 {
1487 	int retry_cnt = SSIF_SEND_RETRIES, ret;
1488 
1489 retry_write:
1490 	ret = i2c_smbus_write_block_data(client,
1491 					 SSIF_IPMI_MULTI_PART_REQUEST_START,
1492 					 32, msg);
1493 	if (ret) {
1494 		retry_cnt--;
1495 		if (retry_cnt > 0)
1496 			goto retry_write;
1497 		dev_err(&client->dev, "Could not write multi-part start, though the BMC said it could handle it.  Just limit sends to one part.\n");
1498 		return ret;
1499 	}
1500 
1501 	if (!do_middle)
1502 		return 0;
1503 
1504 	ret = i2c_smbus_write_block_data(client,
1505 					 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
1506 					 32, msg + 32);
1507 	if (ret) {
1508 		dev_err(&client->dev, "Could not write multi-part middle, though the BMC said it could handle it.  Just limit sends to one part.\n");
1509 		return ret;
1510 	}
1511 
1512 	return 0;
1513 }
1514 
1515 static void test_multipart_messages(struct i2c_client *client,
1516 				    struct ssif_info *ssif_info,
1517 				    unsigned char *resp)
1518 {
1519 	unsigned char msg[65];
1520 	int ret;
1521 	bool do_middle;
1522 
1523 	if (ssif_info->max_xmit_msg_size <= 32)
1524 		return;
1525 
1526 	do_middle = ssif_info->max_xmit_msg_size > 63;
1527 
1528 	memset(msg, 0, sizeof(msg));
1529 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1530 	msg[1] = IPMI_GET_DEVICE_ID_CMD;
1531 
1532 	/*
1533 	 * The specification is all messed up dealing with sending
1534 	 * multi-part messages.  Per what the specification says, it
1535 	 * is impossible to send a message that is a multiple of 32
1536 	 * bytes, except for 32 itself.  It talks about a "start"
1537 	 * transaction (cmd=6) that must be 32 bytes, "middle"
1538 	 * transaction (cmd=7) that must be 32 bytes, and an "end"
1539 	 * transaction.  The "end" transaction is shown as cmd=7 in
1540 	 * the text, but if that's the case there is no way to
1541 	 * differentiate between a middle and end part except the
1542 	 * length being less than 32.  But there is a table at the far
1543 	 * end of the section (that I had never noticed until someone
1544 	 * pointed it out to me) that mentions it as cmd=8.
1545 	 *
1546 	 * After some thought, I think the example is wrong and the
1547 	 * end transaction should be cmd=8.  But some systems don't
1548 	 * implement cmd=8, they use a zero-length end transaction,
1549 	 * even though that violates the SMBus specification.
1550 	 *
1551 	 * So, to work around this, this code tests if cmd=8 works.
1552 	 * If it does, then we use that.  If not, it tests zero-
1553 	 * byte end transactions.  If that works, good.  If not,
1554 	 * we only allow 63-byte transactions max.
1555 	 */
1556 
1557 	ret = start_multipart_test(client, msg, do_middle);
1558 	if (ret)
1559 		goto out_no_multi_part;
1560 
1561 	ret = i2c_smbus_write_block_data(client,
1562 					 SSIF_IPMI_MULTI_PART_REQUEST_END,
1563 					 1, msg + 64);
1564 
1565 	if (!ret)
1566 		ret = read_response(client, resp);
1567 
1568 	if (ret > 0) {
1569 		/* End transactions work, we are good. */
1570 		ssif_info->cmd8_works = true;
1571 		return;
1572 	}
1573 
1574 	ret = start_multipart_test(client, msg, do_middle);
1575 	if (ret) {
1576 		dev_err(&client->dev, "Second multipart test failed.\n");
1577 		goto out_no_multi_part;
1578 	}
1579 
1580 	ret = i2c_smbus_write_block_data(client,
1581 					 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
1582 					 0, msg + 64);
1583 	if (!ret)
1584 		ret = read_response(client, resp);
1585 	if (ret > 0)
1586 		/* Zero-size end parts work, use those. */
1587 		return;
1588 
1589 	/* Limit to 63 bytes and use a short middle command to mark the end. */
1590 	if (ssif_info->max_xmit_msg_size > 63)
1591 		ssif_info->max_xmit_msg_size = 63;
1592 	return;
1593 
1594 out_no_multi_part:
1595 	ssif_info->max_xmit_msg_size = 32;
1596 	return;
1597 }
1598 
1599 /*
1600  * Global enables we care about.
1601  */
1602 #define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \
1603 			     IPMI_BMC_EVT_MSG_INTR)
1604 
1605 static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
1606 {
1607 	unsigned char     msg[3];
1608 	unsigned char     *resp;
1609 	struct ssif_info   *ssif_info;
1610 	int               rv = 0;
1611 	int               len;
1612 	int               i;
1613 	u8		  slave_addr = 0;
1614 	struct ssif_addr_info *addr_info = NULL;
1615 
1616 	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
1617 	if (!resp)
1618 		return -ENOMEM;
1619 
1620 	ssif_info = kzalloc(sizeof(*ssif_info), GFP_KERNEL);
1621 	if (!ssif_info) {
1622 		kfree(resp);
1623 		return -ENOMEM;
1624 	}
1625 
1626 	if (!check_acpi(ssif_info, &client->dev)) {
1627 		addr_info = ssif_info_find(client->addr, client->adapter->name,
1628 					   true);
1629 		if (!addr_info) {
1630 			/* Must have come in through sysfs. */
1631 			ssif_info->addr_source = SI_HOTMOD;
1632 		} else {
1633 			ssif_info->addr_source = addr_info->addr_src;
1634 			ssif_info->ssif_debug = addr_info->debug;
1635 			ssif_info->addr_info = addr_info->addr_info;
1636 			addr_info->client = client;
1637 			slave_addr = addr_info->slave_addr;
1638 		}
1639 	}
1640 
1641 	slave_addr = find_slave_address(client, slave_addr);
1642 
1643 	dev_info(&client->dev,
1644 		 "Trying %s-specified SSIF interface at i2c address 0x%x, adapter %s, slave address 0x%x\n",
1645 		ipmi_addr_src_to_str(ssif_info->addr_source),
1646 		client->addr, client->adapter->name, slave_addr);
1647 
1648 	ssif_info->client = client;
1649 	i2c_set_clientdata(client, ssif_info);
1650 
1651 	/* Now check for system interface capabilities */
1652 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1653 	msg[1] = IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD;
1654 	msg[2] = 0; /* SSIF */
1655 	rv = do_cmd(client, 3, msg, &len, resp);
1656 	if (!rv && (len >= 3) && (resp[2] == 0)) {
1657 		if (len < 7) {
1658 			if (ssif_dbg_probe)
1659 				dev_dbg(&ssif_info->client->dev,
1660 					"SSIF info too short: %d\n", len);
1661 			goto no_support;
1662 		}
1663 
1664 		/* Got a good SSIF response, handle it. */
1665 		ssif_info->max_xmit_msg_size = resp[5];
1666 		ssif_info->max_recv_msg_size = resp[6];
1667 		ssif_info->multi_support = (resp[4] >> 6) & 0x3;
1668 		ssif_info->supports_pec = (resp[4] >> 3) & 0x1;
1669 
1670 		/* Sanitize the data */
1671 		switch (ssif_info->multi_support) {
1672 		case SSIF_NO_MULTI:
1673 			if (ssif_info->max_xmit_msg_size > 32)
1674 				ssif_info->max_xmit_msg_size = 32;
1675 			if (ssif_info->max_recv_msg_size > 32)
1676 				ssif_info->max_recv_msg_size = 32;
1677 			break;
1678 
1679 		case SSIF_MULTI_2_PART:
1680 			if (ssif_info->max_xmit_msg_size > 63)
1681 				ssif_info->max_xmit_msg_size = 63;
1682 			if (ssif_info->max_recv_msg_size > 62)
1683 				ssif_info->max_recv_msg_size = 62;
1684 			break;
1685 
1686 		case SSIF_MULTI_n_PART:
1687 			/* We take whatever size given, but do some testing. */
1688 			break;
1689 
1690 		default:
1691 			/* Data is not sane, just give up. */
1692 			goto no_support;
1693 		}
1694 	} else {
1695  no_support:
1696 		/* Assume no multi-part or PEC support */
1697 		dev_info(&ssif_info->client->dev,
1698 			 "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
1699 			rv, len, resp[2]);
1700 
1701 		ssif_info->max_xmit_msg_size = 32;
1702 		ssif_info->max_recv_msg_size = 32;
1703 		ssif_info->multi_support = SSIF_NO_MULTI;
1704 		ssif_info->supports_pec = 0;
1705 	}
1706 
1707 	test_multipart_messages(client, ssif_info, resp);
1708 
1709 	/* Make sure the NMI timeout is cleared. */
1710 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1711 	msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
1712 	msg[2] = WDT_PRE_TIMEOUT_INT;
1713 	rv = do_cmd(client, 3, msg, &len, resp);
1714 	if (rv || (len < 3) || (resp[2] != 0))
1715 		dev_warn(&ssif_info->client->dev,
1716 			 "Unable to clear message flags: %d %d %2.2x\n",
1717 			 rv, len, resp[2]);
1718 
1719 	/* Attempt to enable the event buffer. */
1720 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1721 	msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
1722 	rv = do_cmd(client, 2, msg, &len, resp);
1723 	if (rv || (len < 4) || (resp[2] != 0)) {
1724 		dev_warn(&ssif_info->client->dev,
1725 			 "Error getting global enables: %d %d %2.2x\n",
1726 			 rv, len, resp[2]);
1727 		rv = 0; /* Not fatal */
1728 		goto found;
1729 	}
1730 
1731 	ssif_info->global_enables = resp[3];
1732 
1733 	if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) {
1734 		ssif_info->has_event_buffer = true;
1735 		/* buffer is already enabled, nothing to do. */
1736 		goto found;
1737 	}
1738 
1739 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1740 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
1741 	msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF;
1742 	rv = do_cmd(client, 3, msg, &len, resp);
1743 	if (rv || (len < 2)) {
1744 		dev_warn(&ssif_info->client->dev,
1745 			 "Error setting global enables: %d %d %2.2x\n",
1746 			 rv, len, resp[2]);
1747 		rv = 0; /* Not fatal */
1748 		goto found;
1749 	}
1750 
1751 	if (resp[2] == 0) {
1752 		/* A successful return means the event buffer is supported. */
1753 		ssif_info->has_event_buffer = true;
1754 		ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF;
1755 	}
1756 
1757 	/* Some systems don't behave well if you enable alerts. */
1758 	if (alerts_broken)
1759 		goto found;
1760 
1761 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1762 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
1763 	msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR;
1764 	rv = do_cmd(client, 3, msg, &len, resp);
1765 	if (rv || (len < 2)) {
1766 		dev_warn(&ssif_info->client->dev,
1767 			 "Error setting global enables: %d %d %2.2x\n",
1768 			 rv, len, resp[2]);
1769 		rv = 0; /* Not fatal */
1770 		goto found;
1771 	}
1772 
1773 	if (resp[2] == 0) {
1774 		/* A successful return means the alert is supported. */
1775 		ssif_info->supports_alert = true;
1776 		ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR;
1777 	}
1778 
1779  found:
1780 	if (ssif_dbg_probe) {
1781 		dev_dbg(&ssif_info->client->dev,
1782 		       "%s: i2c_probe found device at i2c address %x\n",
1783 		       __func__, client->addr);
1784 	}
1785 
1786 	spin_lock_init(&ssif_info->lock);
1787 	ssif_info->ssif_state = SSIF_NORMAL;
1788 	timer_setup(&ssif_info->retry_timer, retry_timeout, 0);
1789 	timer_setup(&ssif_info->watch_timer, watch_timeout, 0);
1790 
1791 	for (i = 0; i < SSIF_NUM_STATS; i++)
1792 		atomic_set(&ssif_info->stats[i], 0);
1793 
1794 	if (ssif_info->supports_pec)
1795 		ssif_info->client->flags |= I2C_CLIENT_PEC;
1796 
1797 	ssif_info->handlers.owner = THIS_MODULE;
1798 	ssif_info->handlers.start_processing = ssif_start_processing;
1799 	ssif_info->handlers.shutdown = shutdown_ssif;
1800 	ssif_info->handlers.get_smi_info = get_smi_info;
1801 	ssif_info->handlers.sender = sender;
1802 	ssif_info->handlers.request_events = request_events;
1803 	ssif_info->handlers.set_need_watch = ssif_set_need_watch;
1804 
1805 	{
1806 		unsigned int thread_num;
1807 
1808 		thread_num = ((i2c_adapter_id(ssif_info->client->adapter)
1809 			       << 8) |
1810 			      ssif_info->client->addr);
1811 		init_completion(&ssif_info->wake_thread);
1812 		ssif_info->thread = kthread_run(ipmi_ssif_thread, ssif_info,
1813 					       "kssif%4.4x", thread_num);
1814 		if (IS_ERR(ssif_info->thread)) {
1815 			rv = PTR_ERR(ssif_info->thread);
1816 			dev_notice(&ssif_info->client->dev,
1817 				   "Could not start kernel thread: error %d\n",
1818 				   rv);
1819 			goto out;
1820 		}
1821 	}
1822 
1823 	dev_set_drvdata(&ssif_info->client->dev, ssif_info);
1824 	rv = device_add_group(&ssif_info->client->dev,
1825 			      &ipmi_ssif_dev_attr_group);
1826 	if (rv) {
1827 		dev_err(&ssif_info->client->dev,
1828 			"Unable to add device attributes: error %d\n",
1829 			rv);
1830 		goto out;
1831 	}
1832 
1833 	rv = ipmi_register_smi(&ssif_info->handlers,
1834 			       ssif_info,
1835 			       &ssif_info->client->dev,
1836 			       slave_addr);
1837 	if (rv) {
1838 		dev_err(&ssif_info->client->dev,
1839 			"Unable to register device: error %d\n", rv);
1840 		goto out_remove_attr;
1841 	}
1842 
1843  out:
1844 	if (rv) {
1845 		if (addr_info)
1846 			addr_info->client = NULL;
1847 
1848 		dev_err(&ssif_info->client->dev,
1849 			"Unable to start IPMI SSIF: %d\n", rv);
1850 		kfree(ssif_info);
1851 	}
1852 	kfree(resp);
1853 	return rv;
1854 
1855 out_remove_attr:
1856 	device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group);
1857 	dev_set_drvdata(&ssif_info->client->dev, NULL);
1858 	goto out;
1859 }
1860 
1861 static int ssif_adapter_handler(struct device *adev, void *opaque)
1862 {
1863 	struct ssif_addr_info *addr_info = opaque;
1864 
1865 	if (adev->type != &i2c_adapter_type)
1866 		return 0;
1867 
1868 	addr_info->added_client = i2c_new_device(to_i2c_adapter(adev),
1869 						 &addr_info->binfo);
1870 
1871 	if (!addr_info->adapter_name)
1872 		return 1; /* Only try the first I2C adapter by default. */
1873 	return 0;
1874 }
1875 
1876 static int new_ssif_client(int addr, char *adapter_name,
1877 			   int debug, int slave_addr,
1878 			   enum ipmi_addr_src addr_src,
1879 			   struct device *dev)
1880 {
1881 	struct ssif_addr_info *addr_info;
1882 	int rv = 0;
1883 
1884 	mutex_lock(&ssif_infos_mutex);
1885 	if (ssif_info_find(addr, adapter_name, false)) {
1886 		rv = -EEXIST;
1887 		goto out_unlock;
1888 	}
1889 
1890 	addr_info = kzalloc(sizeof(*addr_info), GFP_KERNEL);
1891 	if (!addr_info) {
1892 		rv = -ENOMEM;
1893 		goto out_unlock;
1894 	}
1895 
1896 	if (adapter_name) {
1897 		addr_info->adapter_name = kstrdup(adapter_name, GFP_KERNEL);
1898 		if (!addr_info->adapter_name) {
1899 			kfree(addr_info);
1900 			rv = -ENOMEM;
1901 			goto out_unlock;
1902 		}
1903 	}
1904 
1905 	strncpy(addr_info->binfo.type, DEVICE_NAME,
1906 		sizeof(addr_info->binfo.type));
1907 	addr_info->binfo.addr = addr;
1908 	addr_info->binfo.platform_data = addr_info;
1909 	addr_info->debug = debug;
1910 	addr_info->slave_addr = slave_addr;
1911 	addr_info->addr_src = addr_src;
1912 	addr_info->dev = dev;
1913 
1914 	if (dev)
1915 		dev_set_drvdata(dev, addr_info);
1916 
1917 	list_add_tail(&addr_info->link, &ssif_infos);
1918 
1919 	if (initialized)
1920 		i2c_for_each_dev(addr_info, ssif_adapter_handler);
1921 	/* Otherwise address list will get it */
1922 
1923 out_unlock:
1924 	mutex_unlock(&ssif_infos_mutex);
1925 	return rv;
1926 }
1927 
1928 static void free_ssif_clients(void)
1929 {
1930 	struct ssif_addr_info *info, *tmp;
1931 
1932 	mutex_lock(&ssif_infos_mutex);
1933 	list_for_each_entry_safe(info, tmp, &ssif_infos, link) {
1934 		list_del(&info->link);
1935 		kfree(info->adapter_name);
1936 		kfree(info);
1937 	}
1938 	mutex_unlock(&ssif_infos_mutex);
1939 }
1940 
1941 static unsigned short *ssif_address_list(void)
1942 {
1943 	struct ssif_addr_info *info;
1944 	unsigned int count = 0, i = 0;
1945 	unsigned short *address_list;
1946 
1947 	list_for_each_entry(info, &ssif_infos, link)
1948 		count++;
1949 
1950 	address_list = kcalloc(count + 1, sizeof(*address_list),
1951 			       GFP_KERNEL);
1952 	if (!address_list)
1953 		return NULL;
1954 
1955 	list_for_each_entry(info, &ssif_infos, link) {
1956 		unsigned short addr = info->binfo.addr;
1957 		int j;
1958 
1959 		for (j = 0; j < i; j++) {
1960 			if (address_list[j] == addr)
1961 				/* Found a dup. */
1962 				break;
1963 		}
1964 		if (j == i) /* Didn't find it in the list. */
1965 			address_list[i++] = addr;
1966 	}
1967 	address_list[i] = I2C_CLIENT_END;
1968 
1969 	return address_list;
1970 }
1971 
1972 #ifdef CONFIG_ACPI
1973 static const struct acpi_device_id ssif_acpi_match[] = {
1974 	{ "IPI0001", 0 },
1975 	{ },
1976 };
1977 MODULE_DEVICE_TABLE(acpi, ssif_acpi_match);
1978 #endif
1979 
1980 #ifdef CONFIG_DMI
1981 static int dmi_ipmi_probe(struct platform_device *pdev)
1982 {
1983 	u8 slave_addr = 0;
1984 	u16 i2c_addr;
1985 	int rv;
1986 
1987 	if (!ssif_trydmi)
1988 		return -ENODEV;
1989 
1990 	rv = device_property_read_u16(&pdev->dev, "i2c-addr", &i2c_addr);
1991 	if (rv) {
1992 		dev_warn(&pdev->dev, "No i2c-addr property\n");
1993 		return -ENODEV;
1994 	}
1995 
1996 	rv = device_property_read_u8(&pdev->dev, "slave-addr", &slave_addr);
1997 	if (rv)
1998 		slave_addr = 0x20;
1999 
2000 	return new_ssif_client(i2c_addr, NULL, 0,
2001 			       slave_addr, SI_SMBIOS, &pdev->dev);
2002 }
2003 #else
2004 static int dmi_ipmi_probe(struct platform_device *pdev)
2005 {
2006 	return -ENODEV;
2007 }
2008 #endif
2009 
2010 static const struct i2c_device_id ssif_id[] = {
2011 	{ DEVICE_NAME, 0 },
2012 	{ }
2013 };
2014 MODULE_DEVICE_TABLE(i2c, ssif_id);
2015 
2016 static struct i2c_driver ssif_i2c_driver = {
2017 	.class		= I2C_CLASS_HWMON,
2018 	.driver		= {
2019 		.name			= DEVICE_NAME
2020 	},
2021 	.probe		= ssif_probe,
2022 	.remove		= ssif_remove,
2023 	.alert		= ssif_alert,
2024 	.id_table	= ssif_id,
2025 	.detect		= ssif_detect
2026 };
2027 
2028 static int ssif_platform_probe(struct platform_device *dev)
2029 {
2030 	return dmi_ipmi_probe(dev);
2031 }
2032 
2033 static int ssif_platform_remove(struct platform_device *dev)
2034 {
2035 	struct ssif_addr_info *addr_info = dev_get_drvdata(&dev->dev);
2036 
2037 	if (!addr_info)
2038 		return 0;
2039 
2040 	mutex_lock(&ssif_infos_mutex);
2041 	i2c_unregister_device(addr_info->added_client);
2042 
2043 	list_del(&addr_info->link);
2044 	kfree(addr_info);
2045 	mutex_unlock(&ssif_infos_mutex);
2046 	return 0;
2047 }
2048 
2049 static const struct platform_device_id ssif_plat_ids[] = {
2050     { "dmi-ipmi-ssif", 0 },
2051     { }
2052 };
2053 
2054 static struct platform_driver ipmi_driver = {
2055 	.driver = {
2056 		.name = DEVICE_NAME,
2057 	},
2058 	.probe		= ssif_platform_probe,
2059 	.remove		= ssif_platform_remove,
2060 	.id_table       = ssif_plat_ids
2061 };
2062 
2063 static int init_ipmi_ssif(void)
2064 {
2065 	int i;
2066 	int rv;
2067 
2068 	if (initialized)
2069 		return 0;
2070 
2071 	pr_info("IPMI SSIF Interface driver\n");
2072 
2073 	/* build list for i2c from addr list */
2074 	for (i = 0; i < num_addrs; i++) {
2075 		rv = new_ssif_client(addr[i], adapter_name[i],
2076 				     dbg[i], slave_addrs[i],
2077 				     SI_HARDCODED, NULL);
2078 		if (rv)
2079 			pr_err("Couldn't add hardcoded device at addr 0x%x\n",
2080 			       addr[i]);
2081 	}
2082 
2083 	if (ssif_tryacpi)
2084 		ssif_i2c_driver.driver.acpi_match_table	=
2085 			ACPI_PTR(ssif_acpi_match);
2086 
2087 	if (ssif_trydmi) {
2088 		rv = platform_driver_register(&ipmi_driver);
2089 		if (rv)
2090 			pr_err("Unable to register driver: %d\n", rv);
2091 	}
2092 
2093 	ssif_i2c_driver.address_list = ssif_address_list();
2094 
2095 	rv = i2c_add_driver(&ssif_i2c_driver);
2096 	if (!rv)
2097 		initialized = true;
2098 
2099 	return rv;
2100 }
2101 module_init(init_ipmi_ssif);
2102 
2103 static void cleanup_ipmi_ssif(void)
2104 {
2105 	if (!initialized)
2106 		return;
2107 
2108 	initialized = false;
2109 
2110 	i2c_del_driver(&ssif_i2c_driver);
2111 
2112 	kfree(ssif_i2c_driver.address_list);
2113 
2114 	if (ssif_trydmi)
2115 		platform_driver_unregister(&ipmi_driver);
2116 
2117 	free_ssif_clients();
2118 }
2119 module_exit(cleanup_ipmi_ssif);
2120 
2121 MODULE_ALIAS("platform:dmi-ipmi-ssif");
2122 MODULE_AUTHOR("Todd C Davis <todd.c.davis@intel.com>, Corey Minyard <minyard@acm.org>");
2123 MODULE_DESCRIPTION("IPMI driver for management controllers on a SMBus");
2124 MODULE_LICENSE("GPL");
2125