1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * ipmi_ssif.c 4 * 5 * The interface to the IPMI driver for SMBus access to a SMBus 6 * compliant device. Called SSIF by the IPMI spec. 7 * 8 * Author: Intel Corporation 9 * Todd Davis <todd.c.davis@intel.com> 10 * 11 * Rewritten by Corey Minyard <minyard@acm.org> to support the 12 * non-blocking I2C interface, add support for multi-part 13 * transactions, add PEC support, and general clenaup. 14 * 15 * Copyright 2003 Intel Corporation 16 * Copyright 2005 MontaVista Software 17 */ 18 19 /* 20 * This file holds the "policy" for the interface to the SSIF state 21 * machine. It does the configuration, handles timers and interrupts, 22 * and drives the real SSIF state machine. 23 */ 24 25 /* 26 * TODO: Figure out how to use SMB alerts. This will require a new 27 * interface into the I2C driver, I believe. 28 */ 29 30 #define pr_fmt(fmt) "ipmi_ssif: " fmt 31 #define dev_fmt(fmt) "ipmi_ssif: " fmt 32 33 #if defined(MODVERSIONS) 34 #include <linux/modversions.h> 35 #endif 36 37 #include <linux/module.h> 38 #include <linux/moduleparam.h> 39 #include <linux/sched.h> 40 #include <linux/seq_file.h> 41 #include <linux/timer.h> 42 #include <linux/delay.h> 43 #include <linux/errno.h> 44 #include <linux/spinlock.h> 45 #include <linux/slab.h> 46 #include <linux/list.h> 47 #include <linux/i2c.h> 48 #include <linux/ipmi_smi.h> 49 #include <linux/init.h> 50 #include <linux/dmi.h> 51 #include <linux/kthread.h> 52 #include <linux/acpi.h> 53 #include <linux/ctype.h> 54 #include <linux/time64.h> 55 #include "ipmi_dmi.h" 56 57 #define DEVICE_NAME "ipmi_ssif" 58 59 #define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD 0x57 60 61 #define SSIF_IPMI_REQUEST 2 62 #define SSIF_IPMI_MULTI_PART_REQUEST_START 6 63 #define SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE 7 64 #define SSIF_IPMI_MULTI_PART_REQUEST_END 8 65 #define SSIF_IPMI_RESPONSE 3 66 #define SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE 9 67 68 /* ssif_debug is a bit-field 69 * SSIF_DEBUG_MSG - commands and their responses 70 * SSIF_DEBUG_STATES - message states 71 * SSIF_DEBUG_TIMING - Measure times between events in the driver 72 */ 73 #define SSIF_DEBUG_TIMING 4 74 #define SSIF_DEBUG_STATE 2 75 #define SSIF_DEBUG_MSG 1 76 #define SSIF_NODEBUG 0 77 #define SSIF_DEFAULT_DEBUG (SSIF_NODEBUG) 78 79 /* 80 * Timer values 81 */ 82 #define SSIF_MSG_USEC 20000 /* 20ms between message tries. */ 83 #define SSIF_MSG_PART_USEC 5000 /* 5ms for a message part */ 84 85 /* How many times to we retry sending/receiving the message. */ 86 #define SSIF_SEND_RETRIES 5 87 #define SSIF_RECV_RETRIES 250 88 89 #define SSIF_MSG_MSEC (SSIF_MSG_USEC / 1000) 90 #define SSIF_MSG_JIFFIES ((SSIF_MSG_USEC * 1000) / TICK_NSEC) 91 #define SSIF_MSG_PART_JIFFIES ((SSIF_MSG_PART_USEC * 1000) / TICK_NSEC) 92 93 /* 94 * Timeout for the watch, only used for get flag timer. 95 */ 96 #define SSIF_WATCH_MSG_TIMEOUT msecs_to_jiffies(10) 97 #define SSIF_WATCH_WATCHDOG_TIMEOUT msecs_to_jiffies(250) 98 99 enum ssif_intf_state { 100 SSIF_NORMAL, 101 SSIF_GETTING_FLAGS, 102 SSIF_GETTING_EVENTS, 103 SSIF_CLEARING_FLAGS, 104 SSIF_GETTING_MESSAGES, 105 /* FIXME - add watchdog stuff. */ 106 }; 107 108 #define SSIF_IDLE(ssif) ((ssif)->ssif_state == SSIF_NORMAL \ 109 && (ssif)->curr_msg == NULL) 110 111 /* 112 * Indexes into stats[] in ssif_info below. 113 */ 114 enum ssif_stat_indexes { 115 /* Number of total messages sent. */ 116 SSIF_STAT_sent_messages = 0, 117 118 /* 119 * Number of message parts sent. Messages may be broken into 120 * parts if they are long. 121 */ 122 SSIF_STAT_sent_messages_parts, 123 124 /* 125 * Number of time a message was retried. 126 */ 127 SSIF_STAT_send_retries, 128 129 /* 130 * Number of times the send of a message failed. 131 */ 132 SSIF_STAT_send_errors, 133 134 /* 135 * Number of message responses received. 136 */ 137 SSIF_STAT_received_messages, 138 139 /* 140 * Number of message fragments received. 141 */ 142 SSIF_STAT_received_message_parts, 143 144 /* 145 * Number of times the receive of a message was retried. 146 */ 147 SSIF_STAT_receive_retries, 148 149 /* 150 * Number of errors receiving messages. 151 */ 152 SSIF_STAT_receive_errors, 153 154 /* 155 * Number of times a flag fetch was requested. 156 */ 157 SSIF_STAT_flag_fetches, 158 159 /* 160 * Number of times the hardware didn't follow the state machine. 161 */ 162 SSIF_STAT_hosed, 163 164 /* 165 * Number of received events. 166 */ 167 SSIF_STAT_events, 168 169 /* Number of asyncronous messages received. */ 170 SSIF_STAT_incoming_messages, 171 172 /* Number of watchdog pretimeouts. */ 173 SSIF_STAT_watchdog_pretimeouts, 174 175 /* Number of alers received. */ 176 SSIF_STAT_alerts, 177 178 /* Always add statistics before this value, it must be last. */ 179 SSIF_NUM_STATS 180 }; 181 182 struct ssif_addr_info { 183 struct i2c_board_info binfo; 184 char *adapter_name; 185 int debug; 186 int slave_addr; 187 enum ipmi_addr_src addr_src; 188 union ipmi_smi_info_union addr_info; 189 struct device *dev; 190 struct i2c_client *client; 191 192 struct i2c_client *added_client; 193 194 struct mutex clients_mutex; 195 struct list_head clients; 196 197 struct list_head link; 198 }; 199 200 struct ssif_info; 201 202 typedef void (*ssif_i2c_done)(struct ssif_info *ssif_info, int result, 203 unsigned char *data, unsigned int len); 204 205 struct ssif_info { 206 struct ipmi_smi *intf; 207 spinlock_t lock; 208 struct ipmi_smi_msg *waiting_msg; 209 struct ipmi_smi_msg *curr_msg; 210 enum ssif_intf_state ssif_state; 211 unsigned long ssif_debug; 212 213 struct ipmi_smi_handlers handlers; 214 215 enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */ 216 union ipmi_smi_info_union addr_info; 217 218 /* 219 * Flags from the last GET_MSG_FLAGS command, used when an ATTN 220 * is set to hold the flags until we are done handling everything 221 * from the flags. 222 */ 223 #define RECEIVE_MSG_AVAIL 0x01 224 #define EVENT_MSG_BUFFER_FULL 0x02 225 #define WDT_PRE_TIMEOUT_INT 0x08 226 unsigned char msg_flags; 227 228 u8 global_enables; 229 bool has_event_buffer; 230 bool supports_alert; 231 232 /* 233 * Used to tell what we should do with alerts. If we are 234 * waiting on a response, read the data immediately. 235 */ 236 bool got_alert; 237 bool waiting_alert; 238 239 /* 240 * If set to true, this will request events the next time the 241 * state machine is idle. 242 */ 243 bool req_events; 244 245 /* 246 * If set to true, this will request flags the next time the 247 * state machine is idle. 248 */ 249 bool req_flags; 250 251 /* 252 * Used to perform timer operations when run-to-completion 253 * mode is on. This is a countdown timer. 254 */ 255 int rtc_us_timer; 256 257 /* Used for sending/receiving data. +1 for the length. */ 258 unsigned char data[IPMI_MAX_MSG_LENGTH + 1]; 259 unsigned int data_len; 260 261 /* Temp receive buffer, gets copied into data. */ 262 unsigned char recv[I2C_SMBUS_BLOCK_MAX]; 263 264 struct i2c_client *client; 265 ssif_i2c_done done_handler; 266 267 /* Thread interface handling */ 268 struct task_struct *thread; 269 struct completion wake_thread; 270 bool stopping; 271 int i2c_read_write; 272 int i2c_command; 273 unsigned char *i2c_data; 274 unsigned int i2c_size; 275 276 struct timer_list retry_timer; 277 int retries_left; 278 279 long watch_timeout; /* Timeout for flags check, 0 if off. */ 280 struct timer_list watch_timer; /* Flag fetch timer. */ 281 282 /* Info from SSIF cmd */ 283 unsigned char max_xmit_msg_size; 284 unsigned char max_recv_msg_size; 285 bool cmd8_works; /* See test_multipart_messages() for details. */ 286 unsigned int multi_support; 287 int supports_pec; 288 289 #define SSIF_NO_MULTI 0 290 #define SSIF_MULTI_2_PART 1 291 #define SSIF_MULTI_n_PART 2 292 unsigned char *multi_data; 293 unsigned int multi_len; 294 unsigned int multi_pos; 295 296 atomic_t stats[SSIF_NUM_STATS]; 297 }; 298 299 #define ssif_inc_stat(ssif, stat) \ 300 atomic_inc(&(ssif)->stats[SSIF_STAT_ ## stat]) 301 #define ssif_get_stat(ssif, stat) \ 302 ((unsigned int) atomic_read(&(ssif)->stats[SSIF_STAT_ ## stat])) 303 304 static bool initialized; 305 static bool platform_registered; 306 307 static void return_hosed_msg(struct ssif_info *ssif_info, 308 struct ipmi_smi_msg *msg); 309 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags); 310 static int start_send(struct ssif_info *ssif_info, 311 unsigned char *data, 312 unsigned int len); 313 314 static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info, 315 unsigned long *flags) 316 __acquires(&ssif_info->lock) 317 { 318 spin_lock_irqsave(&ssif_info->lock, *flags); 319 return flags; 320 } 321 322 static void ipmi_ssif_unlock_cond(struct ssif_info *ssif_info, 323 unsigned long *flags) 324 __releases(&ssif_info->lock) 325 { 326 spin_unlock_irqrestore(&ssif_info->lock, *flags); 327 } 328 329 static void deliver_recv_msg(struct ssif_info *ssif_info, 330 struct ipmi_smi_msg *msg) 331 { 332 if (msg->rsp_size < 0) { 333 return_hosed_msg(ssif_info, msg); 334 dev_err(&ssif_info->client->dev, 335 "%s: Malformed message: rsp_size = %d\n", 336 __func__, msg->rsp_size); 337 } else { 338 ipmi_smi_msg_received(ssif_info->intf, msg); 339 } 340 } 341 342 static void return_hosed_msg(struct ssif_info *ssif_info, 343 struct ipmi_smi_msg *msg) 344 { 345 ssif_inc_stat(ssif_info, hosed); 346 347 /* Make it a response */ 348 msg->rsp[0] = msg->data[0] | 4; 349 msg->rsp[1] = msg->data[1]; 350 msg->rsp[2] = 0xFF; /* Unknown error. */ 351 msg->rsp_size = 3; 352 353 deliver_recv_msg(ssif_info, msg); 354 } 355 356 /* 357 * Must be called with the message lock held. This will release the 358 * message lock. Note that the caller will check SSIF_IDLE and start a 359 * new operation, so there is no need to check for new messages to 360 * start in here. 361 */ 362 static void start_clear_flags(struct ssif_info *ssif_info, unsigned long *flags) 363 { 364 unsigned char msg[3]; 365 366 ssif_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT; 367 ssif_info->ssif_state = SSIF_CLEARING_FLAGS; 368 ipmi_ssif_unlock_cond(ssif_info, flags); 369 370 /* Make sure the watchdog pre-timeout flag is not set at startup. */ 371 msg[0] = (IPMI_NETFN_APP_REQUEST << 2); 372 msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; 373 msg[2] = WDT_PRE_TIMEOUT_INT; 374 375 if (start_send(ssif_info, msg, 3) != 0) { 376 /* Error, just go to normal state. */ 377 ssif_info->ssif_state = SSIF_NORMAL; 378 } 379 } 380 381 static void start_flag_fetch(struct ssif_info *ssif_info, unsigned long *flags) 382 { 383 unsigned char mb[2]; 384 385 ssif_info->req_flags = false; 386 ssif_info->ssif_state = SSIF_GETTING_FLAGS; 387 ipmi_ssif_unlock_cond(ssif_info, flags); 388 389 mb[0] = (IPMI_NETFN_APP_REQUEST << 2); 390 mb[1] = IPMI_GET_MSG_FLAGS_CMD; 391 if (start_send(ssif_info, mb, 2) != 0) 392 ssif_info->ssif_state = SSIF_NORMAL; 393 } 394 395 static void check_start_send(struct ssif_info *ssif_info, unsigned long *flags, 396 struct ipmi_smi_msg *msg) 397 { 398 if (start_send(ssif_info, msg->data, msg->data_size) != 0) { 399 unsigned long oflags; 400 401 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 402 ssif_info->curr_msg = NULL; 403 ssif_info->ssif_state = SSIF_NORMAL; 404 ipmi_ssif_unlock_cond(ssif_info, flags); 405 ipmi_free_smi_msg(msg); 406 } 407 } 408 409 static void start_event_fetch(struct ssif_info *ssif_info, unsigned long *flags) 410 { 411 struct ipmi_smi_msg *msg; 412 413 ssif_info->req_events = false; 414 415 msg = ipmi_alloc_smi_msg(); 416 if (!msg) { 417 ssif_info->ssif_state = SSIF_NORMAL; 418 ipmi_ssif_unlock_cond(ssif_info, flags); 419 return; 420 } 421 422 ssif_info->curr_msg = msg; 423 ssif_info->ssif_state = SSIF_GETTING_EVENTS; 424 ipmi_ssif_unlock_cond(ssif_info, flags); 425 426 msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); 427 msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD; 428 msg->data_size = 2; 429 430 check_start_send(ssif_info, flags, msg); 431 } 432 433 static void start_recv_msg_fetch(struct ssif_info *ssif_info, 434 unsigned long *flags) 435 { 436 struct ipmi_smi_msg *msg; 437 438 msg = ipmi_alloc_smi_msg(); 439 if (!msg) { 440 ssif_info->ssif_state = SSIF_NORMAL; 441 ipmi_ssif_unlock_cond(ssif_info, flags); 442 return; 443 } 444 445 ssif_info->curr_msg = msg; 446 ssif_info->ssif_state = SSIF_GETTING_MESSAGES; 447 ipmi_ssif_unlock_cond(ssif_info, flags); 448 449 msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); 450 msg->data[1] = IPMI_GET_MSG_CMD; 451 msg->data_size = 2; 452 453 check_start_send(ssif_info, flags, msg); 454 } 455 456 /* 457 * Must be called with the message lock held. This will release the 458 * message lock. Note that the caller will check SSIF_IDLE and start a 459 * new operation, so there is no need to check for new messages to 460 * start in here. 461 */ 462 static void handle_flags(struct ssif_info *ssif_info, unsigned long *flags) 463 { 464 if (ssif_info->msg_flags & WDT_PRE_TIMEOUT_INT) { 465 /* Watchdog pre-timeout */ 466 ssif_inc_stat(ssif_info, watchdog_pretimeouts); 467 start_clear_flags(ssif_info, flags); 468 ipmi_smi_watchdog_pretimeout(ssif_info->intf); 469 } else if (ssif_info->msg_flags & RECEIVE_MSG_AVAIL) 470 /* Messages available. */ 471 start_recv_msg_fetch(ssif_info, flags); 472 else if (ssif_info->msg_flags & EVENT_MSG_BUFFER_FULL) 473 /* Events available. */ 474 start_event_fetch(ssif_info, flags); 475 else { 476 ssif_info->ssif_state = SSIF_NORMAL; 477 ipmi_ssif_unlock_cond(ssif_info, flags); 478 } 479 } 480 481 static int ipmi_ssif_thread(void *data) 482 { 483 struct ssif_info *ssif_info = data; 484 485 while (!kthread_should_stop()) { 486 int result; 487 488 /* Wait for something to do */ 489 result = wait_for_completion_interruptible( 490 &ssif_info->wake_thread); 491 if (ssif_info->stopping) 492 break; 493 if (result == -ERESTARTSYS) 494 continue; 495 init_completion(&ssif_info->wake_thread); 496 497 if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) { 498 result = i2c_smbus_write_block_data( 499 ssif_info->client, ssif_info->i2c_command, 500 ssif_info->i2c_data[0], 501 ssif_info->i2c_data + 1); 502 ssif_info->done_handler(ssif_info, result, NULL, 0); 503 } else { 504 result = i2c_smbus_read_block_data( 505 ssif_info->client, ssif_info->i2c_command, 506 ssif_info->i2c_data); 507 if (result < 0) 508 ssif_info->done_handler(ssif_info, result, 509 NULL, 0); 510 else 511 ssif_info->done_handler(ssif_info, 0, 512 ssif_info->i2c_data, 513 result); 514 } 515 } 516 517 return 0; 518 } 519 520 static int ssif_i2c_send(struct ssif_info *ssif_info, 521 ssif_i2c_done handler, 522 int read_write, int command, 523 unsigned char *data, unsigned int size) 524 { 525 ssif_info->done_handler = handler; 526 527 ssif_info->i2c_read_write = read_write; 528 ssif_info->i2c_command = command; 529 ssif_info->i2c_data = data; 530 ssif_info->i2c_size = size; 531 complete(&ssif_info->wake_thread); 532 return 0; 533 } 534 535 536 static void msg_done_handler(struct ssif_info *ssif_info, int result, 537 unsigned char *data, unsigned int len); 538 539 static void start_get(struct ssif_info *ssif_info) 540 { 541 int rv; 542 543 ssif_info->rtc_us_timer = 0; 544 ssif_info->multi_pos = 0; 545 546 rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, 547 SSIF_IPMI_RESPONSE, 548 ssif_info->recv, I2C_SMBUS_BLOCK_DATA); 549 if (rv < 0) { 550 /* request failed, just return the error. */ 551 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 552 dev_dbg(&ssif_info->client->dev, 553 "Error from i2c_non_blocking_op(5)\n"); 554 555 msg_done_handler(ssif_info, -EIO, NULL, 0); 556 } 557 } 558 559 static void retry_timeout(struct timer_list *t) 560 { 561 struct ssif_info *ssif_info = from_timer(ssif_info, t, retry_timer); 562 unsigned long oflags, *flags; 563 bool waiting; 564 565 if (ssif_info->stopping) 566 return; 567 568 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 569 waiting = ssif_info->waiting_alert; 570 ssif_info->waiting_alert = false; 571 ipmi_ssif_unlock_cond(ssif_info, flags); 572 573 if (waiting) 574 start_get(ssif_info); 575 } 576 577 static void watch_timeout(struct timer_list *t) 578 { 579 struct ssif_info *ssif_info = from_timer(ssif_info, t, watch_timer); 580 unsigned long oflags, *flags; 581 582 if (ssif_info->stopping) 583 return; 584 585 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 586 if (ssif_info->watch_timeout) { 587 mod_timer(&ssif_info->watch_timer, 588 jiffies + ssif_info->watch_timeout); 589 if (SSIF_IDLE(ssif_info)) { 590 start_flag_fetch(ssif_info, flags); /* Releases lock */ 591 return; 592 } 593 ssif_info->req_flags = true; 594 } 595 ipmi_ssif_unlock_cond(ssif_info, flags); 596 } 597 598 static void ssif_alert(struct i2c_client *client, enum i2c_alert_protocol type, 599 unsigned int data) 600 { 601 struct ssif_info *ssif_info = i2c_get_clientdata(client); 602 unsigned long oflags, *flags; 603 bool do_get = false; 604 605 if (type != I2C_PROTOCOL_SMBUS_ALERT) 606 return; 607 608 ssif_inc_stat(ssif_info, alerts); 609 610 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 611 if (ssif_info->waiting_alert) { 612 ssif_info->waiting_alert = false; 613 del_timer(&ssif_info->retry_timer); 614 do_get = true; 615 } else if (ssif_info->curr_msg) { 616 ssif_info->got_alert = true; 617 } 618 ipmi_ssif_unlock_cond(ssif_info, flags); 619 if (do_get) 620 start_get(ssif_info); 621 } 622 623 static int start_resend(struct ssif_info *ssif_info); 624 625 static void msg_done_handler(struct ssif_info *ssif_info, int result, 626 unsigned char *data, unsigned int len) 627 { 628 struct ipmi_smi_msg *msg; 629 unsigned long oflags, *flags; 630 int rv; 631 632 /* 633 * We are single-threaded here, so no need for a lock until we 634 * start messing with driver states or the queues. 635 */ 636 637 if (result < 0) { 638 ssif_info->retries_left--; 639 if (ssif_info->retries_left > 0) { 640 ssif_inc_stat(ssif_info, receive_retries); 641 642 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 643 ssif_info->waiting_alert = true; 644 ssif_info->rtc_us_timer = SSIF_MSG_USEC; 645 if (!ssif_info->stopping) 646 mod_timer(&ssif_info->retry_timer, 647 jiffies + SSIF_MSG_JIFFIES); 648 ipmi_ssif_unlock_cond(ssif_info, flags); 649 return; 650 } 651 652 ssif_inc_stat(ssif_info, receive_errors); 653 654 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 655 dev_dbg(&ssif_info->client->dev, 656 "%s: Error %d\n", __func__, result); 657 len = 0; 658 goto continue_op; 659 } 660 661 if ((len > 1) && (ssif_info->multi_pos == 0) 662 && (data[0] == 0x00) && (data[1] == 0x01)) { 663 /* Start of multi-part read. Start the next transaction. */ 664 int i; 665 666 ssif_inc_stat(ssif_info, received_message_parts); 667 668 /* Remove the multi-part read marker. */ 669 len -= 2; 670 data += 2; 671 for (i = 0; i < len; i++) 672 ssif_info->data[i] = data[i]; 673 ssif_info->multi_len = len; 674 ssif_info->multi_pos = 1; 675 676 rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, 677 SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, 678 ssif_info->recv, I2C_SMBUS_BLOCK_DATA); 679 if (rv < 0) { 680 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 681 dev_dbg(&ssif_info->client->dev, 682 "Error from i2c_non_blocking_op(1)\n"); 683 684 result = -EIO; 685 } else 686 return; 687 } else if (ssif_info->multi_pos) { 688 /* Middle of multi-part read. Start the next transaction. */ 689 int i; 690 unsigned char blocknum; 691 692 if (len == 0) { 693 result = -EIO; 694 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 695 dev_dbg(&ssif_info->client->dev, 696 "Middle message with no data\n"); 697 698 goto continue_op; 699 } 700 701 blocknum = data[0]; 702 len--; 703 data++; 704 705 if (blocknum != 0xff && len != 31) { 706 /* All blocks but the last must have 31 data bytes. */ 707 result = -EIO; 708 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 709 dev_dbg(&ssif_info->client->dev, 710 "Received middle message <31\n"); 711 712 goto continue_op; 713 } 714 715 if (ssif_info->multi_len + len > IPMI_MAX_MSG_LENGTH) { 716 /* Received message too big, abort the operation. */ 717 result = -E2BIG; 718 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 719 dev_dbg(&ssif_info->client->dev, 720 "Received message too big\n"); 721 722 goto continue_op; 723 } 724 725 for (i = 0; i < len; i++) 726 ssif_info->data[i + ssif_info->multi_len] = data[i]; 727 ssif_info->multi_len += len; 728 if (blocknum == 0xff) { 729 /* End of read */ 730 len = ssif_info->multi_len; 731 data = ssif_info->data; 732 } else if (blocknum + 1 != ssif_info->multi_pos) { 733 /* 734 * Out of sequence block, just abort. Block 735 * numbers start at zero for the second block, 736 * but multi_pos starts at one, so the +1. 737 */ 738 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 739 dev_dbg(&ssif_info->client->dev, 740 "Received message out of sequence, expected %u, got %u\n", 741 ssif_info->multi_pos - 1, blocknum); 742 result = -EIO; 743 } else { 744 ssif_inc_stat(ssif_info, received_message_parts); 745 746 ssif_info->multi_pos++; 747 748 rv = ssif_i2c_send(ssif_info, msg_done_handler, 749 I2C_SMBUS_READ, 750 SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, 751 ssif_info->recv, 752 I2C_SMBUS_BLOCK_DATA); 753 if (rv < 0) { 754 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 755 dev_dbg(&ssif_info->client->dev, 756 "Error from ssif_i2c_send\n"); 757 758 result = -EIO; 759 } else 760 return; 761 } 762 } 763 764 continue_op: 765 if (result < 0) { 766 ssif_inc_stat(ssif_info, receive_errors); 767 } else { 768 ssif_inc_stat(ssif_info, received_messages); 769 ssif_inc_stat(ssif_info, received_message_parts); 770 } 771 772 if (ssif_info->ssif_debug & SSIF_DEBUG_STATE) 773 dev_dbg(&ssif_info->client->dev, 774 "DONE 1: state = %d, result=%d\n", 775 ssif_info->ssif_state, result); 776 777 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 778 msg = ssif_info->curr_msg; 779 if (msg) { 780 if (data) { 781 if (len > IPMI_MAX_MSG_LENGTH) 782 len = IPMI_MAX_MSG_LENGTH; 783 memcpy(msg->rsp, data, len); 784 } else { 785 len = 0; 786 } 787 msg->rsp_size = len; 788 ssif_info->curr_msg = NULL; 789 } 790 791 switch (ssif_info->ssif_state) { 792 case SSIF_NORMAL: 793 ipmi_ssif_unlock_cond(ssif_info, flags); 794 if (!msg) 795 break; 796 797 if (result < 0) 798 return_hosed_msg(ssif_info, msg); 799 else 800 deliver_recv_msg(ssif_info, msg); 801 break; 802 803 case SSIF_GETTING_FLAGS: 804 /* We got the flags from the SSIF, now handle them. */ 805 if ((result < 0) || (len < 4) || (data[2] != 0)) { 806 /* 807 * Error fetching flags, or invalid length, 808 * just give up for now. 809 */ 810 ssif_info->ssif_state = SSIF_NORMAL; 811 ipmi_ssif_unlock_cond(ssif_info, flags); 812 dev_warn(&ssif_info->client->dev, 813 "Error getting flags: %d %d, %x\n", 814 result, len, (len >= 3) ? data[2] : 0); 815 } else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 816 || data[1] != IPMI_GET_MSG_FLAGS_CMD) { 817 /* 818 * Don't abort here, maybe it was a queued 819 * response to a previous command. 820 */ 821 ipmi_ssif_unlock_cond(ssif_info, flags); 822 dev_warn(&ssif_info->client->dev, 823 "Invalid response getting flags: %x %x\n", 824 data[0], data[1]); 825 } else { 826 ssif_inc_stat(ssif_info, flag_fetches); 827 ssif_info->msg_flags = data[3]; 828 handle_flags(ssif_info, flags); 829 } 830 break; 831 832 case SSIF_CLEARING_FLAGS: 833 /* We cleared the flags. */ 834 if ((result < 0) || (len < 3) || (data[2] != 0)) { 835 /* Error clearing flags */ 836 dev_warn(&ssif_info->client->dev, 837 "Error clearing flags: %d %d, %x\n", 838 result, len, (len >= 3) ? data[2] : 0); 839 } else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 840 || data[1] != IPMI_CLEAR_MSG_FLAGS_CMD) { 841 dev_warn(&ssif_info->client->dev, 842 "Invalid response clearing flags: %x %x\n", 843 data[0], data[1]); 844 } 845 ssif_info->ssif_state = SSIF_NORMAL; 846 ipmi_ssif_unlock_cond(ssif_info, flags); 847 break; 848 849 case SSIF_GETTING_EVENTS: 850 if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { 851 /* Error getting event, probably done. */ 852 msg->done(msg); 853 854 /* Take off the event flag. */ 855 ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; 856 handle_flags(ssif_info, flags); 857 } else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 858 || msg->rsp[1] != IPMI_READ_EVENT_MSG_BUFFER_CMD) { 859 dev_warn(&ssif_info->client->dev, 860 "Invalid response getting events: %x %x\n", 861 msg->rsp[0], msg->rsp[1]); 862 msg->done(msg); 863 /* Take off the event flag. */ 864 ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; 865 handle_flags(ssif_info, flags); 866 } else { 867 handle_flags(ssif_info, flags); 868 ssif_inc_stat(ssif_info, events); 869 deliver_recv_msg(ssif_info, msg); 870 } 871 break; 872 873 case SSIF_GETTING_MESSAGES: 874 if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { 875 /* Error getting event, probably done. */ 876 msg->done(msg); 877 878 /* Take off the msg flag. */ 879 ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL; 880 handle_flags(ssif_info, flags); 881 } else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 882 || msg->rsp[1] != IPMI_GET_MSG_CMD) { 883 dev_warn(&ssif_info->client->dev, 884 "Invalid response clearing flags: %x %x\n", 885 msg->rsp[0], msg->rsp[1]); 886 msg->done(msg); 887 888 /* Take off the msg flag. */ 889 ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL; 890 handle_flags(ssif_info, flags); 891 } else { 892 ssif_inc_stat(ssif_info, incoming_messages); 893 handle_flags(ssif_info, flags); 894 deliver_recv_msg(ssif_info, msg); 895 } 896 break; 897 } 898 899 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 900 if (SSIF_IDLE(ssif_info) && !ssif_info->stopping) { 901 if (ssif_info->req_events) 902 start_event_fetch(ssif_info, flags); 903 else if (ssif_info->req_flags) 904 start_flag_fetch(ssif_info, flags); 905 else 906 start_next_msg(ssif_info, flags); 907 } else 908 ipmi_ssif_unlock_cond(ssif_info, flags); 909 910 if (ssif_info->ssif_debug & SSIF_DEBUG_STATE) 911 dev_dbg(&ssif_info->client->dev, 912 "DONE 2: state = %d.\n", ssif_info->ssif_state); 913 } 914 915 static void msg_written_handler(struct ssif_info *ssif_info, int result, 916 unsigned char *data, unsigned int len) 917 { 918 int rv; 919 920 /* We are single-threaded here, so no need for a lock. */ 921 if (result < 0) { 922 ssif_info->retries_left--; 923 if (ssif_info->retries_left > 0) { 924 if (!start_resend(ssif_info)) { 925 ssif_inc_stat(ssif_info, send_retries); 926 return; 927 } 928 /* request failed, just return the error. */ 929 ssif_inc_stat(ssif_info, send_errors); 930 931 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 932 dev_dbg(&ssif_info->client->dev, 933 "%s: Out of retries\n", __func__); 934 msg_done_handler(ssif_info, -EIO, NULL, 0); 935 return; 936 } 937 938 ssif_inc_stat(ssif_info, send_errors); 939 940 /* 941 * Got an error on transmit, let the done routine 942 * handle it. 943 */ 944 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 945 dev_dbg(&ssif_info->client->dev, 946 "%s: Error %d\n", __func__, result); 947 948 msg_done_handler(ssif_info, result, NULL, 0); 949 return; 950 } 951 952 if (ssif_info->multi_data) { 953 /* 954 * In the middle of a multi-data write. See the comment 955 * in the SSIF_MULTI_n_PART case in the probe function 956 * for details on the intricacies of this. 957 */ 958 int left, to_write; 959 unsigned char *data_to_send; 960 unsigned char cmd; 961 962 ssif_inc_stat(ssif_info, sent_messages_parts); 963 964 left = ssif_info->multi_len - ssif_info->multi_pos; 965 to_write = left; 966 if (to_write > 32) 967 to_write = 32; 968 /* Length byte. */ 969 ssif_info->multi_data[ssif_info->multi_pos] = to_write; 970 data_to_send = ssif_info->multi_data + ssif_info->multi_pos; 971 ssif_info->multi_pos += to_write; 972 cmd = SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE; 973 if (ssif_info->cmd8_works) { 974 if (left == to_write) { 975 cmd = SSIF_IPMI_MULTI_PART_REQUEST_END; 976 ssif_info->multi_data = NULL; 977 } 978 } else if (to_write < 32) { 979 ssif_info->multi_data = NULL; 980 } 981 982 rv = ssif_i2c_send(ssif_info, msg_written_handler, 983 I2C_SMBUS_WRITE, cmd, 984 data_to_send, I2C_SMBUS_BLOCK_DATA); 985 if (rv < 0) { 986 /* request failed, just return the error. */ 987 ssif_inc_stat(ssif_info, send_errors); 988 989 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 990 dev_dbg(&ssif_info->client->dev, 991 "Error from i2c_non_blocking_op(3)\n"); 992 msg_done_handler(ssif_info, -EIO, NULL, 0); 993 } 994 } else { 995 /* Ready to request the result. */ 996 unsigned long oflags, *flags; 997 998 ssif_inc_stat(ssif_info, sent_messages); 999 ssif_inc_stat(ssif_info, sent_messages_parts); 1000 1001 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1002 if (ssif_info->got_alert) { 1003 /* The result is already ready, just start it. */ 1004 ssif_info->got_alert = false; 1005 ipmi_ssif_unlock_cond(ssif_info, flags); 1006 start_get(ssif_info); 1007 } else { 1008 /* Wait a jiffie then request the next message */ 1009 ssif_info->waiting_alert = true; 1010 ssif_info->retries_left = SSIF_RECV_RETRIES; 1011 ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC; 1012 if (!ssif_info->stopping) 1013 mod_timer(&ssif_info->retry_timer, 1014 jiffies + SSIF_MSG_PART_JIFFIES); 1015 ipmi_ssif_unlock_cond(ssif_info, flags); 1016 } 1017 } 1018 } 1019 1020 static int start_resend(struct ssif_info *ssif_info) 1021 { 1022 int rv; 1023 int command; 1024 1025 ssif_info->got_alert = false; 1026 1027 if (ssif_info->data_len > 32) { 1028 command = SSIF_IPMI_MULTI_PART_REQUEST_START; 1029 ssif_info->multi_data = ssif_info->data; 1030 ssif_info->multi_len = ssif_info->data_len; 1031 /* 1032 * Subtle thing, this is 32, not 33, because we will 1033 * overwrite the thing at position 32 (which was just 1034 * transmitted) with the new length. 1035 */ 1036 ssif_info->multi_pos = 32; 1037 ssif_info->data[0] = 32; 1038 } else { 1039 ssif_info->multi_data = NULL; 1040 command = SSIF_IPMI_REQUEST; 1041 ssif_info->data[0] = ssif_info->data_len; 1042 } 1043 1044 rv = ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE, 1045 command, ssif_info->data, I2C_SMBUS_BLOCK_DATA); 1046 if (rv && (ssif_info->ssif_debug & SSIF_DEBUG_MSG)) 1047 dev_dbg(&ssif_info->client->dev, 1048 "Error from i2c_non_blocking_op(4)\n"); 1049 return rv; 1050 } 1051 1052 static int start_send(struct ssif_info *ssif_info, 1053 unsigned char *data, 1054 unsigned int len) 1055 { 1056 if (len > IPMI_MAX_MSG_LENGTH) 1057 return -E2BIG; 1058 if (len > ssif_info->max_xmit_msg_size) 1059 return -E2BIG; 1060 1061 ssif_info->retries_left = SSIF_SEND_RETRIES; 1062 memcpy(ssif_info->data + 1, data, len); 1063 ssif_info->data_len = len; 1064 return start_resend(ssif_info); 1065 } 1066 1067 /* Must be called with the message lock held. */ 1068 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags) 1069 { 1070 struct ipmi_smi_msg *msg; 1071 unsigned long oflags; 1072 1073 restart: 1074 if (!SSIF_IDLE(ssif_info)) { 1075 ipmi_ssif_unlock_cond(ssif_info, flags); 1076 return; 1077 } 1078 1079 if (!ssif_info->waiting_msg) { 1080 ssif_info->curr_msg = NULL; 1081 ipmi_ssif_unlock_cond(ssif_info, flags); 1082 } else { 1083 int rv; 1084 1085 ssif_info->curr_msg = ssif_info->waiting_msg; 1086 ssif_info->waiting_msg = NULL; 1087 ipmi_ssif_unlock_cond(ssif_info, flags); 1088 rv = start_send(ssif_info, 1089 ssif_info->curr_msg->data, 1090 ssif_info->curr_msg->data_size); 1091 if (rv) { 1092 msg = ssif_info->curr_msg; 1093 ssif_info->curr_msg = NULL; 1094 return_hosed_msg(ssif_info, msg); 1095 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1096 goto restart; 1097 } 1098 } 1099 } 1100 1101 static void sender(void *send_info, 1102 struct ipmi_smi_msg *msg) 1103 { 1104 struct ssif_info *ssif_info = (struct ssif_info *) send_info; 1105 unsigned long oflags, *flags; 1106 1107 BUG_ON(ssif_info->waiting_msg); 1108 ssif_info->waiting_msg = msg; 1109 1110 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1111 start_next_msg(ssif_info, flags); 1112 1113 if (ssif_info->ssif_debug & SSIF_DEBUG_TIMING) { 1114 struct timespec64 t; 1115 1116 ktime_get_real_ts64(&t); 1117 dev_dbg(&ssif_info->client->dev, 1118 "**Enqueue %02x %02x: %lld.%6.6ld\n", 1119 msg->data[0], msg->data[1], 1120 (long long)t.tv_sec, (long)t.tv_nsec / NSEC_PER_USEC); 1121 } 1122 } 1123 1124 static int get_smi_info(void *send_info, struct ipmi_smi_info *data) 1125 { 1126 struct ssif_info *ssif_info = send_info; 1127 1128 data->addr_src = ssif_info->addr_source; 1129 data->dev = &ssif_info->client->dev; 1130 data->addr_info = ssif_info->addr_info; 1131 get_device(data->dev); 1132 1133 return 0; 1134 } 1135 1136 /* 1137 * Upper layer wants us to request events. 1138 */ 1139 static void request_events(void *send_info) 1140 { 1141 struct ssif_info *ssif_info = (struct ssif_info *) send_info; 1142 unsigned long oflags, *flags; 1143 1144 if (!ssif_info->has_event_buffer) 1145 return; 1146 1147 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1148 ssif_info->req_events = true; 1149 ipmi_ssif_unlock_cond(ssif_info, flags); 1150 } 1151 1152 /* 1153 * Upper layer is changing the flag saying whether we need to request 1154 * flags periodically or not. 1155 */ 1156 static void ssif_set_need_watch(void *send_info, unsigned int watch_mask) 1157 { 1158 struct ssif_info *ssif_info = (struct ssif_info *) send_info; 1159 unsigned long oflags, *flags; 1160 long timeout = 0; 1161 1162 if (watch_mask & IPMI_WATCH_MASK_CHECK_MESSAGES) 1163 timeout = SSIF_WATCH_MSG_TIMEOUT; 1164 else if (watch_mask) 1165 timeout = SSIF_WATCH_WATCHDOG_TIMEOUT; 1166 1167 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1168 if (timeout != ssif_info->watch_timeout) { 1169 ssif_info->watch_timeout = timeout; 1170 if (ssif_info->watch_timeout) 1171 mod_timer(&ssif_info->watch_timer, 1172 jiffies + ssif_info->watch_timeout); 1173 } 1174 ipmi_ssif_unlock_cond(ssif_info, flags); 1175 } 1176 1177 static int ssif_start_processing(void *send_info, 1178 struct ipmi_smi *intf) 1179 { 1180 struct ssif_info *ssif_info = send_info; 1181 1182 ssif_info->intf = intf; 1183 1184 return 0; 1185 } 1186 1187 #define MAX_SSIF_BMCS 4 1188 1189 static unsigned short addr[MAX_SSIF_BMCS]; 1190 static int num_addrs; 1191 module_param_array(addr, ushort, &num_addrs, 0); 1192 MODULE_PARM_DESC(addr, "The addresses to scan for IPMI BMCs on the SSIFs."); 1193 1194 static char *adapter_name[MAX_SSIF_BMCS]; 1195 static int num_adapter_names; 1196 module_param_array(adapter_name, charp, &num_adapter_names, 0); 1197 MODULE_PARM_DESC(adapter_name, "The string name of the I2C device that has the BMC. By default all devices are scanned."); 1198 1199 static int slave_addrs[MAX_SSIF_BMCS]; 1200 static int num_slave_addrs; 1201 module_param_array(slave_addrs, int, &num_slave_addrs, 0); 1202 MODULE_PARM_DESC(slave_addrs, 1203 "The default IPMB slave address for the controller."); 1204 1205 static bool alerts_broken; 1206 module_param(alerts_broken, bool, 0); 1207 MODULE_PARM_DESC(alerts_broken, "Don't enable alerts for the controller."); 1208 1209 /* 1210 * Bit 0 enables message debugging, bit 1 enables state debugging, and 1211 * bit 2 enables timing debugging. This is an array indexed by 1212 * interface number" 1213 */ 1214 static int dbg[MAX_SSIF_BMCS]; 1215 static int num_dbg; 1216 module_param_array(dbg, int, &num_dbg, 0); 1217 MODULE_PARM_DESC(dbg, "Turn on debugging."); 1218 1219 static bool ssif_dbg_probe; 1220 module_param_named(dbg_probe, ssif_dbg_probe, bool, 0); 1221 MODULE_PARM_DESC(dbg_probe, "Enable debugging of probing of adapters."); 1222 1223 static bool ssif_tryacpi = true; 1224 module_param_named(tryacpi, ssif_tryacpi, bool, 0); 1225 MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the default scan of the interfaces identified via ACPI"); 1226 1227 static bool ssif_trydmi = true; 1228 module_param_named(trydmi, ssif_trydmi, bool, 0); 1229 MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the default scan of the interfaces identified via DMI (SMBIOS)"); 1230 1231 static DEFINE_MUTEX(ssif_infos_mutex); 1232 static LIST_HEAD(ssif_infos); 1233 1234 #define IPMI_SSIF_ATTR(name) \ 1235 static ssize_t ipmi_##name##_show(struct device *dev, \ 1236 struct device_attribute *attr, \ 1237 char *buf) \ 1238 { \ 1239 struct ssif_info *ssif_info = dev_get_drvdata(dev); \ 1240 \ 1241 return snprintf(buf, 10, "%u\n", ssif_get_stat(ssif_info, name));\ 1242 } \ 1243 static DEVICE_ATTR(name, S_IRUGO, ipmi_##name##_show, NULL) 1244 1245 static ssize_t ipmi_type_show(struct device *dev, 1246 struct device_attribute *attr, 1247 char *buf) 1248 { 1249 return snprintf(buf, 10, "ssif\n"); 1250 } 1251 static DEVICE_ATTR(type, S_IRUGO, ipmi_type_show, NULL); 1252 1253 IPMI_SSIF_ATTR(sent_messages); 1254 IPMI_SSIF_ATTR(sent_messages_parts); 1255 IPMI_SSIF_ATTR(send_retries); 1256 IPMI_SSIF_ATTR(send_errors); 1257 IPMI_SSIF_ATTR(received_messages); 1258 IPMI_SSIF_ATTR(received_message_parts); 1259 IPMI_SSIF_ATTR(receive_retries); 1260 IPMI_SSIF_ATTR(receive_errors); 1261 IPMI_SSIF_ATTR(flag_fetches); 1262 IPMI_SSIF_ATTR(hosed); 1263 IPMI_SSIF_ATTR(events); 1264 IPMI_SSIF_ATTR(watchdog_pretimeouts); 1265 IPMI_SSIF_ATTR(alerts); 1266 1267 static struct attribute *ipmi_ssif_dev_attrs[] = { 1268 &dev_attr_type.attr, 1269 &dev_attr_sent_messages.attr, 1270 &dev_attr_sent_messages_parts.attr, 1271 &dev_attr_send_retries.attr, 1272 &dev_attr_send_errors.attr, 1273 &dev_attr_received_messages.attr, 1274 &dev_attr_received_message_parts.attr, 1275 &dev_attr_receive_retries.attr, 1276 &dev_attr_receive_errors.attr, 1277 &dev_attr_flag_fetches.attr, 1278 &dev_attr_hosed.attr, 1279 &dev_attr_events.attr, 1280 &dev_attr_watchdog_pretimeouts.attr, 1281 &dev_attr_alerts.attr, 1282 NULL 1283 }; 1284 1285 static const struct attribute_group ipmi_ssif_dev_attr_group = { 1286 .attrs = ipmi_ssif_dev_attrs, 1287 }; 1288 1289 static void shutdown_ssif(void *send_info) 1290 { 1291 struct ssif_info *ssif_info = send_info; 1292 1293 device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group); 1294 dev_set_drvdata(&ssif_info->client->dev, NULL); 1295 1296 /* make sure the driver is not looking for flags any more. */ 1297 while (ssif_info->ssif_state != SSIF_NORMAL) 1298 schedule_timeout(1); 1299 1300 ssif_info->stopping = true; 1301 del_timer_sync(&ssif_info->watch_timer); 1302 del_timer_sync(&ssif_info->retry_timer); 1303 if (ssif_info->thread) { 1304 complete(&ssif_info->wake_thread); 1305 kthread_stop(ssif_info->thread); 1306 } 1307 } 1308 1309 static int ssif_remove(struct i2c_client *client) 1310 { 1311 struct ssif_info *ssif_info = i2c_get_clientdata(client); 1312 struct ssif_addr_info *addr_info; 1313 1314 if (!ssif_info) 1315 return 0; 1316 1317 /* 1318 * After this point, we won't deliver anything asychronously 1319 * to the message handler. We can unregister ourself. 1320 */ 1321 ipmi_unregister_smi(ssif_info->intf); 1322 1323 list_for_each_entry(addr_info, &ssif_infos, link) { 1324 if (addr_info->client == client) { 1325 addr_info->client = NULL; 1326 break; 1327 } 1328 } 1329 1330 kfree(ssif_info); 1331 1332 return 0; 1333 } 1334 1335 static int read_response(struct i2c_client *client, unsigned char *resp) 1336 { 1337 int ret = -ENODEV, retry_cnt = SSIF_RECV_RETRIES; 1338 1339 while (retry_cnt > 0) { 1340 ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE, 1341 resp); 1342 if (ret > 0) 1343 break; 1344 msleep(SSIF_MSG_MSEC); 1345 retry_cnt--; 1346 if (retry_cnt <= 0) 1347 break; 1348 } 1349 1350 return ret; 1351 } 1352 1353 static int do_cmd(struct i2c_client *client, int len, unsigned char *msg, 1354 int *resp_len, unsigned char *resp) 1355 { 1356 int retry_cnt; 1357 int ret; 1358 1359 retry_cnt = SSIF_SEND_RETRIES; 1360 retry1: 1361 ret = i2c_smbus_write_block_data(client, SSIF_IPMI_REQUEST, len, msg); 1362 if (ret) { 1363 retry_cnt--; 1364 if (retry_cnt > 0) 1365 goto retry1; 1366 return -ENODEV; 1367 } 1368 1369 ret = read_response(client, resp); 1370 if (ret > 0) { 1371 /* Validate that the response is correct. */ 1372 if (ret < 3 || 1373 (resp[0] != (msg[0] | (1 << 2))) || 1374 (resp[1] != msg[1])) 1375 ret = -EINVAL; 1376 else if (ret > IPMI_MAX_MSG_LENGTH) { 1377 ret = -E2BIG; 1378 } else { 1379 *resp_len = ret; 1380 ret = 0; 1381 } 1382 } 1383 1384 return ret; 1385 } 1386 1387 static int ssif_detect(struct i2c_client *client, struct i2c_board_info *info) 1388 { 1389 unsigned char *resp; 1390 unsigned char msg[3]; 1391 int rv; 1392 int len; 1393 1394 resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); 1395 if (!resp) 1396 return -ENOMEM; 1397 1398 /* Do a Get Device ID command, since it is required. */ 1399 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1400 msg[1] = IPMI_GET_DEVICE_ID_CMD; 1401 rv = do_cmd(client, 2, msg, &len, resp); 1402 if (rv) 1403 rv = -ENODEV; 1404 else 1405 strlcpy(info->type, DEVICE_NAME, I2C_NAME_SIZE); 1406 kfree(resp); 1407 return rv; 1408 } 1409 1410 static int strcmp_nospace(char *s1, char *s2) 1411 { 1412 while (*s1 && *s2) { 1413 while (isspace(*s1)) 1414 s1++; 1415 while (isspace(*s2)) 1416 s2++; 1417 if (*s1 > *s2) 1418 return 1; 1419 if (*s1 < *s2) 1420 return -1; 1421 s1++; 1422 s2++; 1423 } 1424 return 0; 1425 } 1426 1427 static struct ssif_addr_info *ssif_info_find(unsigned short addr, 1428 char *adapter_name, 1429 bool match_null_name) 1430 { 1431 struct ssif_addr_info *info, *found = NULL; 1432 1433 restart: 1434 list_for_each_entry(info, &ssif_infos, link) { 1435 if (info->binfo.addr == addr) { 1436 if (info->addr_src == SI_SMBIOS) 1437 info->adapter_name = kstrdup(adapter_name, 1438 GFP_KERNEL); 1439 1440 if (info->adapter_name || adapter_name) { 1441 if (!info->adapter_name != !adapter_name) { 1442 /* One is NULL and one is not */ 1443 continue; 1444 } 1445 if (adapter_name && 1446 strcmp_nospace(info->adapter_name, 1447 adapter_name)) 1448 /* Names do not match */ 1449 continue; 1450 } 1451 found = info; 1452 break; 1453 } 1454 } 1455 1456 if (!found && match_null_name) { 1457 /* Try to get an exact match first, then try with a NULL name */ 1458 adapter_name = NULL; 1459 match_null_name = false; 1460 goto restart; 1461 } 1462 1463 return found; 1464 } 1465 1466 static bool check_acpi(struct ssif_info *ssif_info, struct device *dev) 1467 { 1468 #ifdef CONFIG_ACPI 1469 acpi_handle acpi_handle; 1470 1471 acpi_handle = ACPI_HANDLE(dev); 1472 if (acpi_handle) { 1473 ssif_info->addr_source = SI_ACPI; 1474 ssif_info->addr_info.acpi_info.acpi_handle = acpi_handle; 1475 return true; 1476 } 1477 #endif 1478 return false; 1479 } 1480 1481 static int find_slave_address(struct i2c_client *client, int slave_addr) 1482 { 1483 #ifdef CONFIG_IPMI_DMI_DECODE 1484 if (!slave_addr) 1485 slave_addr = ipmi_dmi_get_slave_addr( 1486 SI_TYPE_INVALID, 1487 i2c_adapter_id(client->adapter), 1488 client->addr); 1489 #endif 1490 1491 return slave_addr; 1492 } 1493 1494 static int start_multipart_test(struct i2c_client *client, 1495 unsigned char *msg, bool do_middle) 1496 { 1497 int retry_cnt = SSIF_SEND_RETRIES, ret; 1498 1499 retry_write: 1500 ret = i2c_smbus_write_block_data(client, 1501 SSIF_IPMI_MULTI_PART_REQUEST_START, 1502 32, msg); 1503 if (ret) { 1504 retry_cnt--; 1505 if (retry_cnt > 0) 1506 goto retry_write; 1507 dev_err(&client->dev, "Could not write multi-part start, though the BMC said it could handle it. Just limit sends to one part.\n"); 1508 return ret; 1509 } 1510 1511 if (!do_middle) 1512 return 0; 1513 1514 ret = i2c_smbus_write_block_data(client, 1515 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE, 1516 32, msg + 32); 1517 if (ret) { 1518 dev_err(&client->dev, "Could not write multi-part middle, though the BMC said it could handle it. Just limit sends to one part.\n"); 1519 return ret; 1520 } 1521 1522 return 0; 1523 } 1524 1525 static void test_multipart_messages(struct i2c_client *client, 1526 struct ssif_info *ssif_info, 1527 unsigned char *resp) 1528 { 1529 unsigned char msg[65]; 1530 int ret; 1531 bool do_middle; 1532 1533 if (ssif_info->max_xmit_msg_size <= 32) 1534 return; 1535 1536 do_middle = ssif_info->max_xmit_msg_size > 63; 1537 1538 memset(msg, 0, sizeof(msg)); 1539 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1540 msg[1] = IPMI_GET_DEVICE_ID_CMD; 1541 1542 /* 1543 * The specification is all messed up dealing with sending 1544 * multi-part messages. Per what the specification says, it 1545 * is impossible to send a message that is a multiple of 32 1546 * bytes, except for 32 itself. It talks about a "start" 1547 * transaction (cmd=6) that must be 32 bytes, "middle" 1548 * transaction (cmd=7) that must be 32 bytes, and an "end" 1549 * transaction. The "end" transaction is shown as cmd=7 in 1550 * the text, but if that's the case there is no way to 1551 * differentiate between a middle and end part except the 1552 * length being less than 32. But there is a table at the far 1553 * end of the section (that I had never noticed until someone 1554 * pointed it out to me) that mentions it as cmd=8. 1555 * 1556 * After some thought, I think the example is wrong and the 1557 * end transaction should be cmd=8. But some systems don't 1558 * implement cmd=8, they use a zero-length end transaction, 1559 * even though that violates the SMBus specification. 1560 * 1561 * So, to work around this, this code tests if cmd=8 works. 1562 * If it does, then we use that. If not, it tests zero- 1563 * byte end transactions. If that works, good. If not, 1564 * we only allow 63-byte transactions max. 1565 */ 1566 1567 ret = start_multipart_test(client, msg, do_middle); 1568 if (ret) 1569 goto out_no_multi_part; 1570 1571 ret = i2c_smbus_write_block_data(client, 1572 SSIF_IPMI_MULTI_PART_REQUEST_END, 1573 1, msg + 64); 1574 1575 if (!ret) 1576 ret = read_response(client, resp); 1577 1578 if (ret > 0) { 1579 /* End transactions work, we are good. */ 1580 ssif_info->cmd8_works = true; 1581 return; 1582 } 1583 1584 ret = start_multipart_test(client, msg, do_middle); 1585 if (ret) { 1586 dev_err(&client->dev, "Second multipart test failed.\n"); 1587 goto out_no_multi_part; 1588 } 1589 1590 ret = i2c_smbus_write_block_data(client, 1591 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE, 1592 0, msg + 64); 1593 if (!ret) 1594 ret = read_response(client, resp); 1595 if (ret > 0) 1596 /* Zero-size end parts work, use those. */ 1597 return; 1598 1599 /* Limit to 63 bytes and use a short middle command to mark the end. */ 1600 if (ssif_info->max_xmit_msg_size > 63) 1601 ssif_info->max_xmit_msg_size = 63; 1602 return; 1603 1604 out_no_multi_part: 1605 ssif_info->max_xmit_msg_size = 32; 1606 return; 1607 } 1608 1609 /* 1610 * Global enables we care about. 1611 */ 1612 #define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \ 1613 IPMI_BMC_EVT_MSG_INTR) 1614 1615 static void ssif_remove_dup(struct i2c_client *client) 1616 { 1617 struct ssif_info *ssif_info = i2c_get_clientdata(client); 1618 1619 ipmi_unregister_smi(ssif_info->intf); 1620 kfree(ssif_info); 1621 } 1622 1623 static int ssif_add_infos(struct i2c_client *client) 1624 { 1625 struct ssif_addr_info *info; 1626 1627 info = kzalloc(sizeof(*info), GFP_KERNEL); 1628 if (!info) 1629 return -ENOMEM; 1630 info->addr_src = SI_ACPI; 1631 info->client = client; 1632 info->adapter_name = kstrdup(client->adapter->name, GFP_KERNEL); 1633 info->binfo.addr = client->addr; 1634 list_add_tail(&info->link, &ssif_infos); 1635 return 0; 1636 } 1637 1638 /* 1639 * Prefer ACPI over SMBIOS, if both are available. 1640 * So if we get an ACPI interface and have already registered a SMBIOS 1641 * interface at the same address, remove the SMBIOS and add the ACPI one. 1642 */ 1643 static int ssif_check_and_remove(struct i2c_client *client, 1644 struct ssif_info *ssif_info) 1645 { 1646 struct ssif_addr_info *info; 1647 1648 list_for_each_entry(info, &ssif_infos, link) { 1649 if (!info->client) 1650 return 0; 1651 if (!strcmp(info->adapter_name, client->adapter->name) && 1652 info->binfo.addr == client->addr) { 1653 if (info->addr_src == SI_ACPI) 1654 return -EEXIST; 1655 1656 if (ssif_info->addr_source == SI_ACPI && 1657 info->addr_src == SI_SMBIOS) { 1658 dev_info(&client->dev, 1659 "Removing %s-specified SSIF interface in favor of ACPI\n", 1660 ipmi_addr_src_to_str(info->addr_src)); 1661 ssif_remove_dup(info->client); 1662 return 0; 1663 } 1664 } 1665 } 1666 return 0; 1667 } 1668 1669 static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) 1670 { 1671 unsigned char msg[3]; 1672 unsigned char *resp; 1673 struct ssif_info *ssif_info; 1674 int rv = 0; 1675 int len; 1676 int i; 1677 u8 slave_addr = 0; 1678 struct ssif_addr_info *addr_info = NULL; 1679 1680 mutex_lock(&ssif_infos_mutex); 1681 resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); 1682 if (!resp) { 1683 mutex_unlock(&ssif_infos_mutex); 1684 return -ENOMEM; 1685 } 1686 1687 ssif_info = kzalloc(sizeof(*ssif_info), GFP_KERNEL); 1688 if (!ssif_info) { 1689 kfree(resp); 1690 mutex_unlock(&ssif_infos_mutex); 1691 return -ENOMEM; 1692 } 1693 1694 if (!check_acpi(ssif_info, &client->dev)) { 1695 addr_info = ssif_info_find(client->addr, client->adapter->name, 1696 true); 1697 if (!addr_info) { 1698 /* Must have come in through sysfs. */ 1699 ssif_info->addr_source = SI_HOTMOD; 1700 } else { 1701 ssif_info->addr_source = addr_info->addr_src; 1702 ssif_info->ssif_debug = addr_info->debug; 1703 ssif_info->addr_info = addr_info->addr_info; 1704 addr_info->client = client; 1705 slave_addr = addr_info->slave_addr; 1706 } 1707 } 1708 1709 rv = ssif_check_and_remove(client, ssif_info); 1710 /* If rv is 0 and addr source is not SI_ACPI, continue probing */ 1711 if (!rv && ssif_info->addr_source == SI_ACPI) { 1712 rv = ssif_add_infos(client); 1713 if (rv) { 1714 dev_err(&client->dev, "Out of memory!, exiting ..\n"); 1715 goto out; 1716 } 1717 } else if (rv) { 1718 dev_err(&client->dev, "Not probing, Interface already present\n"); 1719 goto out; 1720 } 1721 1722 slave_addr = find_slave_address(client, slave_addr); 1723 1724 dev_info(&client->dev, 1725 "Trying %s-specified SSIF interface at i2c address 0x%x, adapter %s, slave address 0x%x\n", 1726 ipmi_addr_src_to_str(ssif_info->addr_source), 1727 client->addr, client->adapter->name, slave_addr); 1728 1729 ssif_info->client = client; 1730 i2c_set_clientdata(client, ssif_info); 1731 1732 /* Now check for system interface capabilities */ 1733 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1734 msg[1] = IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD; 1735 msg[2] = 0; /* SSIF */ 1736 rv = do_cmd(client, 3, msg, &len, resp); 1737 if (!rv && (len >= 3) && (resp[2] == 0)) { 1738 if (len < 7) { 1739 if (ssif_dbg_probe) 1740 dev_dbg(&ssif_info->client->dev, 1741 "SSIF info too short: %d\n", len); 1742 goto no_support; 1743 } 1744 1745 /* Got a good SSIF response, handle it. */ 1746 ssif_info->max_xmit_msg_size = resp[5]; 1747 ssif_info->max_recv_msg_size = resp[6]; 1748 ssif_info->multi_support = (resp[4] >> 6) & 0x3; 1749 ssif_info->supports_pec = (resp[4] >> 3) & 0x1; 1750 1751 /* Sanitize the data */ 1752 switch (ssif_info->multi_support) { 1753 case SSIF_NO_MULTI: 1754 if (ssif_info->max_xmit_msg_size > 32) 1755 ssif_info->max_xmit_msg_size = 32; 1756 if (ssif_info->max_recv_msg_size > 32) 1757 ssif_info->max_recv_msg_size = 32; 1758 break; 1759 1760 case SSIF_MULTI_2_PART: 1761 if (ssif_info->max_xmit_msg_size > 63) 1762 ssif_info->max_xmit_msg_size = 63; 1763 if (ssif_info->max_recv_msg_size > 62) 1764 ssif_info->max_recv_msg_size = 62; 1765 break; 1766 1767 case SSIF_MULTI_n_PART: 1768 /* We take whatever size given, but do some testing. */ 1769 break; 1770 1771 default: 1772 /* Data is not sane, just give up. */ 1773 goto no_support; 1774 } 1775 } else { 1776 no_support: 1777 /* Assume no multi-part or PEC support */ 1778 dev_info(&ssif_info->client->dev, 1779 "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n", 1780 rv, len, resp[2]); 1781 1782 ssif_info->max_xmit_msg_size = 32; 1783 ssif_info->max_recv_msg_size = 32; 1784 ssif_info->multi_support = SSIF_NO_MULTI; 1785 ssif_info->supports_pec = 0; 1786 } 1787 1788 test_multipart_messages(client, ssif_info, resp); 1789 1790 /* Make sure the NMI timeout is cleared. */ 1791 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1792 msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; 1793 msg[2] = WDT_PRE_TIMEOUT_INT; 1794 rv = do_cmd(client, 3, msg, &len, resp); 1795 if (rv || (len < 3) || (resp[2] != 0)) 1796 dev_warn(&ssif_info->client->dev, 1797 "Unable to clear message flags: %d %d %2.2x\n", 1798 rv, len, resp[2]); 1799 1800 /* Attempt to enable the event buffer. */ 1801 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1802 msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; 1803 rv = do_cmd(client, 2, msg, &len, resp); 1804 if (rv || (len < 4) || (resp[2] != 0)) { 1805 dev_warn(&ssif_info->client->dev, 1806 "Error getting global enables: %d %d %2.2x\n", 1807 rv, len, resp[2]); 1808 rv = 0; /* Not fatal */ 1809 goto found; 1810 } 1811 1812 ssif_info->global_enables = resp[3]; 1813 1814 if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) { 1815 ssif_info->has_event_buffer = true; 1816 /* buffer is already enabled, nothing to do. */ 1817 goto found; 1818 } 1819 1820 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1821 msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; 1822 msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF; 1823 rv = do_cmd(client, 3, msg, &len, resp); 1824 if (rv || (len < 2)) { 1825 dev_warn(&ssif_info->client->dev, 1826 "Error setting global enables: %d %d %2.2x\n", 1827 rv, len, resp[2]); 1828 rv = 0; /* Not fatal */ 1829 goto found; 1830 } 1831 1832 if (resp[2] == 0) { 1833 /* A successful return means the event buffer is supported. */ 1834 ssif_info->has_event_buffer = true; 1835 ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF; 1836 } 1837 1838 /* Some systems don't behave well if you enable alerts. */ 1839 if (alerts_broken) 1840 goto found; 1841 1842 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1843 msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; 1844 msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR; 1845 rv = do_cmd(client, 3, msg, &len, resp); 1846 if (rv || (len < 2)) { 1847 dev_warn(&ssif_info->client->dev, 1848 "Error setting global enables: %d %d %2.2x\n", 1849 rv, len, resp[2]); 1850 rv = 0; /* Not fatal */ 1851 goto found; 1852 } 1853 1854 if (resp[2] == 0) { 1855 /* A successful return means the alert is supported. */ 1856 ssif_info->supports_alert = true; 1857 ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR; 1858 } 1859 1860 found: 1861 if (ssif_dbg_probe) { 1862 dev_dbg(&ssif_info->client->dev, 1863 "%s: i2c_probe found device at i2c address %x\n", 1864 __func__, client->addr); 1865 } 1866 1867 spin_lock_init(&ssif_info->lock); 1868 ssif_info->ssif_state = SSIF_NORMAL; 1869 timer_setup(&ssif_info->retry_timer, retry_timeout, 0); 1870 timer_setup(&ssif_info->watch_timer, watch_timeout, 0); 1871 1872 for (i = 0; i < SSIF_NUM_STATS; i++) 1873 atomic_set(&ssif_info->stats[i], 0); 1874 1875 if (ssif_info->supports_pec) 1876 ssif_info->client->flags |= I2C_CLIENT_PEC; 1877 1878 ssif_info->handlers.owner = THIS_MODULE; 1879 ssif_info->handlers.start_processing = ssif_start_processing; 1880 ssif_info->handlers.shutdown = shutdown_ssif; 1881 ssif_info->handlers.get_smi_info = get_smi_info; 1882 ssif_info->handlers.sender = sender; 1883 ssif_info->handlers.request_events = request_events; 1884 ssif_info->handlers.set_need_watch = ssif_set_need_watch; 1885 1886 { 1887 unsigned int thread_num; 1888 1889 thread_num = ((i2c_adapter_id(ssif_info->client->adapter) 1890 << 8) | 1891 ssif_info->client->addr); 1892 init_completion(&ssif_info->wake_thread); 1893 ssif_info->thread = kthread_run(ipmi_ssif_thread, ssif_info, 1894 "kssif%4.4x", thread_num); 1895 if (IS_ERR(ssif_info->thread)) { 1896 rv = PTR_ERR(ssif_info->thread); 1897 dev_notice(&ssif_info->client->dev, 1898 "Could not start kernel thread: error %d\n", 1899 rv); 1900 goto out; 1901 } 1902 } 1903 1904 dev_set_drvdata(&ssif_info->client->dev, ssif_info); 1905 rv = device_add_group(&ssif_info->client->dev, 1906 &ipmi_ssif_dev_attr_group); 1907 if (rv) { 1908 dev_err(&ssif_info->client->dev, 1909 "Unable to add device attributes: error %d\n", 1910 rv); 1911 goto out; 1912 } 1913 1914 rv = ipmi_register_smi(&ssif_info->handlers, 1915 ssif_info, 1916 &ssif_info->client->dev, 1917 slave_addr); 1918 if (rv) { 1919 dev_err(&ssif_info->client->dev, 1920 "Unable to register device: error %d\n", rv); 1921 goto out_remove_attr; 1922 } 1923 1924 out: 1925 if (rv) { 1926 if (addr_info) 1927 addr_info->client = NULL; 1928 1929 dev_err(&ssif_info->client->dev, 1930 "Unable to start IPMI SSIF: %d\n", rv); 1931 kfree(ssif_info); 1932 } 1933 kfree(resp); 1934 mutex_unlock(&ssif_infos_mutex); 1935 return rv; 1936 1937 out_remove_attr: 1938 device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group); 1939 dev_set_drvdata(&ssif_info->client->dev, NULL); 1940 goto out; 1941 } 1942 1943 static int ssif_adapter_handler(struct device *adev, void *opaque) 1944 { 1945 struct ssif_addr_info *addr_info = opaque; 1946 1947 if (adev->type != &i2c_adapter_type) 1948 return 0; 1949 1950 addr_info->added_client = i2c_new_device(to_i2c_adapter(adev), 1951 &addr_info->binfo); 1952 1953 if (!addr_info->adapter_name) 1954 return 1; /* Only try the first I2C adapter by default. */ 1955 return 0; 1956 } 1957 1958 static int new_ssif_client(int addr, char *adapter_name, 1959 int debug, int slave_addr, 1960 enum ipmi_addr_src addr_src, 1961 struct device *dev) 1962 { 1963 struct ssif_addr_info *addr_info; 1964 int rv = 0; 1965 1966 mutex_lock(&ssif_infos_mutex); 1967 if (ssif_info_find(addr, adapter_name, false)) { 1968 rv = -EEXIST; 1969 goto out_unlock; 1970 } 1971 1972 addr_info = kzalloc(sizeof(*addr_info), GFP_KERNEL); 1973 if (!addr_info) { 1974 rv = -ENOMEM; 1975 goto out_unlock; 1976 } 1977 1978 if (adapter_name) { 1979 addr_info->adapter_name = kstrdup(adapter_name, GFP_KERNEL); 1980 if (!addr_info->adapter_name) { 1981 kfree(addr_info); 1982 rv = -ENOMEM; 1983 goto out_unlock; 1984 } 1985 } 1986 1987 strncpy(addr_info->binfo.type, DEVICE_NAME, 1988 sizeof(addr_info->binfo.type)); 1989 addr_info->binfo.addr = addr; 1990 addr_info->binfo.platform_data = addr_info; 1991 addr_info->debug = debug; 1992 addr_info->slave_addr = slave_addr; 1993 addr_info->addr_src = addr_src; 1994 addr_info->dev = dev; 1995 1996 if (dev) 1997 dev_set_drvdata(dev, addr_info); 1998 1999 list_add_tail(&addr_info->link, &ssif_infos); 2000 2001 if (initialized) 2002 i2c_for_each_dev(addr_info, ssif_adapter_handler); 2003 /* Otherwise address list will get it */ 2004 2005 out_unlock: 2006 mutex_unlock(&ssif_infos_mutex); 2007 return rv; 2008 } 2009 2010 static void free_ssif_clients(void) 2011 { 2012 struct ssif_addr_info *info, *tmp; 2013 2014 mutex_lock(&ssif_infos_mutex); 2015 list_for_each_entry_safe(info, tmp, &ssif_infos, link) { 2016 list_del(&info->link); 2017 kfree(info->adapter_name); 2018 kfree(info); 2019 } 2020 mutex_unlock(&ssif_infos_mutex); 2021 } 2022 2023 static unsigned short *ssif_address_list(void) 2024 { 2025 struct ssif_addr_info *info; 2026 unsigned int count = 0, i = 0; 2027 unsigned short *address_list; 2028 2029 list_for_each_entry(info, &ssif_infos, link) 2030 count++; 2031 2032 address_list = kcalloc(count + 1, sizeof(*address_list), 2033 GFP_KERNEL); 2034 if (!address_list) 2035 return NULL; 2036 2037 list_for_each_entry(info, &ssif_infos, link) { 2038 unsigned short addr = info->binfo.addr; 2039 int j; 2040 2041 for (j = 0; j < i; j++) { 2042 if (address_list[j] == addr) 2043 /* Found a dup. */ 2044 break; 2045 } 2046 if (j == i) /* Didn't find it in the list. */ 2047 address_list[i++] = addr; 2048 } 2049 address_list[i] = I2C_CLIENT_END; 2050 2051 return address_list; 2052 } 2053 2054 #ifdef CONFIG_ACPI 2055 static const struct acpi_device_id ssif_acpi_match[] = { 2056 { "IPI0001", 0 }, 2057 { }, 2058 }; 2059 MODULE_DEVICE_TABLE(acpi, ssif_acpi_match); 2060 #endif 2061 2062 #ifdef CONFIG_DMI 2063 static int dmi_ipmi_probe(struct platform_device *pdev) 2064 { 2065 u8 slave_addr = 0; 2066 u16 i2c_addr; 2067 int rv; 2068 2069 if (!ssif_trydmi) 2070 return -ENODEV; 2071 2072 rv = device_property_read_u16(&pdev->dev, "i2c-addr", &i2c_addr); 2073 if (rv) { 2074 dev_warn(&pdev->dev, "No i2c-addr property\n"); 2075 return -ENODEV; 2076 } 2077 2078 rv = device_property_read_u8(&pdev->dev, "slave-addr", &slave_addr); 2079 if (rv) 2080 slave_addr = 0x20; 2081 2082 return new_ssif_client(i2c_addr, NULL, 0, 2083 slave_addr, SI_SMBIOS, &pdev->dev); 2084 } 2085 #else 2086 static int dmi_ipmi_probe(struct platform_device *pdev) 2087 { 2088 return -ENODEV; 2089 } 2090 #endif 2091 2092 static const struct i2c_device_id ssif_id[] = { 2093 { DEVICE_NAME, 0 }, 2094 { } 2095 }; 2096 MODULE_DEVICE_TABLE(i2c, ssif_id); 2097 2098 static struct i2c_driver ssif_i2c_driver = { 2099 .class = I2C_CLASS_HWMON, 2100 .driver = { 2101 .name = DEVICE_NAME 2102 }, 2103 .probe = ssif_probe, 2104 .remove = ssif_remove, 2105 .alert = ssif_alert, 2106 .id_table = ssif_id, 2107 .detect = ssif_detect 2108 }; 2109 2110 static int ssif_platform_probe(struct platform_device *dev) 2111 { 2112 return dmi_ipmi_probe(dev); 2113 } 2114 2115 static int ssif_platform_remove(struct platform_device *dev) 2116 { 2117 struct ssif_addr_info *addr_info = dev_get_drvdata(&dev->dev); 2118 2119 if (!addr_info) 2120 return 0; 2121 2122 mutex_lock(&ssif_infos_mutex); 2123 i2c_unregister_device(addr_info->added_client); 2124 2125 list_del(&addr_info->link); 2126 kfree(addr_info); 2127 mutex_unlock(&ssif_infos_mutex); 2128 return 0; 2129 } 2130 2131 static const struct platform_device_id ssif_plat_ids[] = { 2132 { "dmi-ipmi-ssif", 0 }, 2133 { } 2134 }; 2135 2136 static struct platform_driver ipmi_driver = { 2137 .driver = { 2138 .name = DEVICE_NAME, 2139 }, 2140 .probe = ssif_platform_probe, 2141 .remove = ssif_platform_remove, 2142 .id_table = ssif_plat_ids 2143 }; 2144 2145 static int init_ipmi_ssif(void) 2146 { 2147 int i; 2148 int rv; 2149 2150 if (initialized) 2151 return 0; 2152 2153 pr_info("IPMI SSIF Interface driver\n"); 2154 2155 /* build list for i2c from addr list */ 2156 for (i = 0; i < num_addrs; i++) { 2157 rv = new_ssif_client(addr[i], adapter_name[i], 2158 dbg[i], slave_addrs[i], 2159 SI_HARDCODED, NULL); 2160 if (rv) 2161 pr_err("Couldn't add hardcoded device at addr 0x%x\n", 2162 addr[i]); 2163 } 2164 2165 if (ssif_tryacpi) 2166 ssif_i2c_driver.driver.acpi_match_table = 2167 ACPI_PTR(ssif_acpi_match); 2168 2169 if (ssif_trydmi) { 2170 rv = platform_driver_register(&ipmi_driver); 2171 if (rv) 2172 pr_err("Unable to register driver: %d\n", rv); 2173 else 2174 platform_registered = true; 2175 } 2176 2177 ssif_i2c_driver.address_list = ssif_address_list(); 2178 2179 rv = i2c_add_driver(&ssif_i2c_driver); 2180 if (!rv) 2181 initialized = true; 2182 2183 return rv; 2184 } 2185 module_init(init_ipmi_ssif); 2186 2187 static void cleanup_ipmi_ssif(void) 2188 { 2189 if (!initialized) 2190 return; 2191 2192 initialized = false; 2193 2194 i2c_del_driver(&ssif_i2c_driver); 2195 2196 kfree(ssif_i2c_driver.address_list); 2197 2198 if (ssif_trydmi && platform_registered) 2199 platform_driver_unregister(&ipmi_driver); 2200 2201 free_ssif_clients(); 2202 } 2203 module_exit(cleanup_ipmi_ssif); 2204 2205 MODULE_ALIAS("platform:dmi-ipmi-ssif"); 2206 MODULE_AUTHOR("Todd C Davis <todd.c.davis@intel.com>, Corey Minyard <minyard@acm.org>"); 2207 MODULE_DESCRIPTION("IPMI driver for management controllers on a SMBus"); 2208 MODULE_LICENSE("GPL"); 2209