1 /* 2 * ipmi_poweroff.c 3 * 4 * MontaVista IPMI Poweroff extension to sys_reboot 5 * 6 * Author: MontaVista Software, Inc. 7 * Steven Dake <sdake@mvista.com> 8 * Corey Minyard <cminyard@mvista.com> 9 * source@mvista.com 10 * 11 * Copyright 2002,2004 MontaVista Software Inc. 12 * 13 * This program is free software; you can redistribute it and/or modify it 14 * under the terms of the GNU General Public License as published by the 15 * Free Software Foundation; either version 2 of the License, or (at your 16 * option) any later version. 17 * 18 * 19 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 20 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 21 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 22 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 23 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 24 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 25 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 26 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 27 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 28 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 29 * 30 * You should have received a copy of the GNU General Public License along 31 * with this program; if not, write to the Free Software Foundation, Inc., 32 * 675 Mass Ave, Cambridge, MA 02139, USA. 33 */ 34 #include <linux/module.h> 35 #include <linux/moduleparam.h> 36 #include <linux/proc_fs.h> 37 #include <linux/string.h> 38 #include <linux/completion.h> 39 #include <linux/pm.h> 40 #include <linux/kdev_t.h> 41 #include <linux/ipmi.h> 42 #include <linux/ipmi_smi.h> 43 44 #define PFX "IPMI poweroff: " 45 46 static void ipmi_po_smi_gone(int if_num); 47 static void ipmi_po_new_smi(int if_num, struct device *device); 48 49 /* Definitions for controlling power off (if the system supports it). It 50 * conveniently matches the IPMI chassis control values. */ 51 #define IPMI_CHASSIS_POWER_DOWN 0 /* power down, the default. */ 52 #define IPMI_CHASSIS_POWER_CYCLE 0x02 /* power cycle */ 53 54 /* the IPMI data command */ 55 static int poweroff_powercycle; 56 57 /* Which interface to use, -1 means the first we see. */ 58 static int ifnum_to_use = -1; 59 60 /* Our local state. */ 61 static int ready; 62 static ipmi_user_t ipmi_user; 63 static int ipmi_ifnum; 64 static void (*specific_poweroff_func)(ipmi_user_t user); 65 66 /* Holds the old poweroff function so we can restore it on removal. */ 67 static void (*old_poweroff_func)(void); 68 69 static int set_param_ifnum(const char *val, struct kernel_param *kp) 70 { 71 int rv = param_set_int(val, kp); 72 if (rv) 73 return rv; 74 if ((ifnum_to_use < 0) || (ifnum_to_use == ipmi_ifnum)) 75 return 0; 76 77 ipmi_po_smi_gone(ipmi_ifnum); 78 ipmi_po_new_smi(ifnum_to_use, NULL); 79 return 0; 80 } 81 82 module_param_call(ifnum_to_use, set_param_ifnum, param_get_int, 83 &ifnum_to_use, 0644); 84 MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog " 85 "timer. Setting to -1 defaults to the first registered " 86 "interface"); 87 88 /* parameter definition to allow user to flag power cycle */ 89 module_param(poweroff_powercycle, int, 0644); 90 MODULE_PARM_DESC(poweroff_powercycle, 91 " Set to non-zero to enable power cycle instead of power" 92 " down. Power cycle is contingent on hardware support," 93 " otherwise it defaults back to power down."); 94 95 /* Stuff from the get device id command. */ 96 static unsigned int mfg_id; 97 static unsigned int prod_id; 98 static unsigned char capabilities; 99 static unsigned char ipmi_version; 100 101 /* 102 * We use our own messages for this operation, we don't let the system 103 * allocate them, since we may be in a panic situation. The whole 104 * thing is single-threaded, anyway, so multiple messages are not 105 * required. 106 */ 107 static atomic_t dummy_count = ATOMIC_INIT(0); 108 static void dummy_smi_free(struct ipmi_smi_msg *msg) 109 { 110 atomic_dec(&dummy_count); 111 } 112 static void dummy_recv_free(struct ipmi_recv_msg *msg) 113 { 114 atomic_dec(&dummy_count); 115 } 116 static struct ipmi_smi_msg halt_smi_msg = { 117 .done = dummy_smi_free 118 }; 119 static struct ipmi_recv_msg halt_recv_msg = { 120 .done = dummy_recv_free 121 }; 122 123 124 /* 125 * Code to send a message and wait for the response. 126 */ 127 128 static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data) 129 { 130 struct completion *comp = recv_msg->user_msg_data; 131 132 if (comp) 133 complete(comp); 134 } 135 136 static struct ipmi_user_hndl ipmi_poweroff_handler = { 137 .ipmi_recv_hndl = receive_handler 138 }; 139 140 141 static int ipmi_request_wait_for_response(ipmi_user_t user, 142 struct ipmi_addr *addr, 143 struct kernel_ipmi_msg *send_msg) 144 { 145 int rv; 146 struct completion comp; 147 148 init_completion(&comp); 149 150 rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &comp, 151 &halt_smi_msg, &halt_recv_msg, 0); 152 if (rv) 153 return rv; 154 155 wait_for_completion(&comp); 156 157 return halt_recv_msg.msg.data[0]; 158 } 159 160 /* Wait for message to complete, spinning. */ 161 static int ipmi_request_in_rc_mode(ipmi_user_t user, 162 struct ipmi_addr *addr, 163 struct kernel_ipmi_msg *send_msg) 164 { 165 int rv; 166 167 atomic_set(&dummy_count, 2); 168 rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL, 169 &halt_smi_msg, &halt_recv_msg, 0); 170 if (rv) { 171 atomic_set(&dummy_count, 0); 172 return rv; 173 } 174 175 /* 176 * Spin until our message is done. 177 */ 178 while (atomic_read(&dummy_count) > 0) { 179 ipmi_poll_interface(user); 180 cpu_relax(); 181 } 182 183 return halt_recv_msg.msg.data[0]; 184 } 185 186 /* 187 * ATCA Support 188 */ 189 190 #define IPMI_NETFN_ATCA 0x2c 191 #define IPMI_ATCA_SET_POWER_CMD 0x11 192 #define IPMI_ATCA_GET_ADDR_INFO_CMD 0x01 193 #define IPMI_PICMG_ID 0 194 195 #define IPMI_NETFN_OEM 0x2e 196 #define IPMI_ATCA_PPS_GRACEFUL_RESTART 0x11 197 #define IPMI_ATCA_PPS_IANA "\x00\x40\x0A" 198 #define IPMI_MOTOROLA_MANUFACTURER_ID 0x0000A1 199 #define IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID 0x0051 200 201 static void (*atca_oem_poweroff_hook)(ipmi_user_t user); 202 203 static void pps_poweroff_atca(ipmi_user_t user) 204 { 205 struct ipmi_system_interface_addr smi_addr; 206 struct kernel_ipmi_msg send_msg; 207 int rv; 208 /* 209 * Configure IPMI address for local access 210 */ 211 smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; 212 smi_addr.channel = IPMI_BMC_CHANNEL; 213 smi_addr.lun = 0; 214 215 printk(KERN_INFO PFX "PPS powerdown hook used"); 216 217 send_msg.netfn = IPMI_NETFN_OEM; 218 send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART; 219 send_msg.data = IPMI_ATCA_PPS_IANA; 220 send_msg.data_len = 3; 221 rv = ipmi_request_in_rc_mode(user, 222 (struct ipmi_addr *) &smi_addr, 223 &send_msg); 224 if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { 225 printk(KERN_ERR PFX "Unable to send ATCA ," 226 " IPMI error 0x%x\n", rv); 227 } 228 return; 229 } 230 231 static int ipmi_atca_detect(ipmi_user_t user) 232 { 233 struct ipmi_system_interface_addr smi_addr; 234 struct kernel_ipmi_msg send_msg; 235 int rv; 236 unsigned char data[1]; 237 238 /* 239 * Configure IPMI address for local access 240 */ 241 smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; 242 smi_addr.channel = IPMI_BMC_CHANNEL; 243 smi_addr.lun = 0; 244 245 /* 246 * Use get address info to check and see if we are ATCA 247 */ 248 send_msg.netfn = IPMI_NETFN_ATCA; 249 send_msg.cmd = IPMI_ATCA_GET_ADDR_INFO_CMD; 250 data[0] = IPMI_PICMG_ID; 251 send_msg.data = data; 252 send_msg.data_len = sizeof(data); 253 rv = ipmi_request_wait_for_response(user, 254 (struct ipmi_addr *) &smi_addr, 255 &send_msg); 256 257 printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n", 258 mfg_id, prod_id); 259 if ((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID) 260 && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) { 261 printk(KERN_INFO PFX 262 "Installing Pigeon Point Systems Poweroff Hook\n"); 263 atca_oem_poweroff_hook = pps_poweroff_atca; 264 } 265 return !rv; 266 } 267 268 static void ipmi_poweroff_atca(ipmi_user_t user) 269 { 270 struct ipmi_system_interface_addr smi_addr; 271 struct kernel_ipmi_msg send_msg; 272 int rv; 273 unsigned char data[4]; 274 275 /* 276 * Configure IPMI address for local access 277 */ 278 smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; 279 smi_addr.channel = IPMI_BMC_CHANNEL; 280 smi_addr.lun = 0; 281 282 printk(KERN_INFO PFX "Powering down via ATCA power command\n"); 283 284 /* 285 * Power down 286 */ 287 send_msg.netfn = IPMI_NETFN_ATCA; 288 send_msg.cmd = IPMI_ATCA_SET_POWER_CMD; 289 data[0] = IPMI_PICMG_ID; 290 data[1] = 0; /* FRU id */ 291 data[2] = 0; /* Power Level */ 292 data[3] = 0; /* Don't change saved presets */ 293 send_msg.data = data; 294 send_msg.data_len = sizeof(data); 295 rv = ipmi_request_in_rc_mode(user, 296 (struct ipmi_addr *) &smi_addr, 297 &send_msg); 298 /* 299 * At this point, the system may be shutting down, and most 300 * serial drivers (if used) will have interrupts turned off 301 * it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE 302 * return code 303 */ 304 if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { 305 printk(KERN_ERR PFX "Unable to send ATCA powerdown message," 306 " IPMI error 0x%x\n", rv); 307 goto out; 308 } 309 310 if (atca_oem_poweroff_hook) 311 atca_oem_poweroff_hook(user); 312 out: 313 return; 314 } 315 316 /* 317 * CPI1 Support 318 */ 319 320 #define IPMI_NETFN_OEM_1 0xf8 321 #define OEM_GRP_CMD_SET_RESET_STATE 0x84 322 #define OEM_GRP_CMD_SET_POWER_STATE 0x82 323 #define IPMI_NETFN_OEM_8 0xf8 324 #define OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL 0x80 325 #define OEM_GRP_CMD_GET_SLOT_GA 0xa3 326 #define IPMI_NETFN_SENSOR_EVT 0x10 327 #define IPMI_CMD_GET_EVENT_RECEIVER 0x01 328 329 #define IPMI_CPI1_PRODUCT_ID 0x000157 330 #define IPMI_CPI1_MANUFACTURER_ID 0x0108 331 332 static int ipmi_cpi1_detect(ipmi_user_t user) 333 { 334 return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID) 335 && (prod_id == IPMI_CPI1_PRODUCT_ID)); 336 } 337 338 static void ipmi_poweroff_cpi1(ipmi_user_t user) 339 { 340 struct ipmi_system_interface_addr smi_addr; 341 struct ipmi_ipmb_addr ipmb_addr; 342 struct kernel_ipmi_msg send_msg; 343 int rv; 344 unsigned char data[1]; 345 int slot; 346 unsigned char hotswap_ipmb; 347 unsigned char aer_addr; 348 unsigned char aer_lun; 349 350 /* 351 * Configure IPMI address for local access 352 */ 353 smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; 354 smi_addr.channel = IPMI_BMC_CHANNEL; 355 smi_addr.lun = 0; 356 357 printk(KERN_INFO PFX "Powering down via CPI1 power command\n"); 358 359 /* 360 * Get IPMI ipmb address 361 */ 362 send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; 363 send_msg.cmd = OEM_GRP_CMD_GET_SLOT_GA; 364 send_msg.data = NULL; 365 send_msg.data_len = 0; 366 rv = ipmi_request_in_rc_mode(user, 367 (struct ipmi_addr *) &smi_addr, 368 &send_msg); 369 if (rv) 370 goto out; 371 slot = halt_recv_msg.msg.data[1]; 372 hotswap_ipmb = (slot > 9) ? (0xb0 + 2 * slot) : (0xae + 2 * slot); 373 374 /* 375 * Get active event receiver 376 */ 377 send_msg.netfn = IPMI_NETFN_SENSOR_EVT >> 2; 378 send_msg.cmd = IPMI_CMD_GET_EVENT_RECEIVER; 379 send_msg.data = NULL; 380 send_msg.data_len = 0; 381 rv = ipmi_request_in_rc_mode(user, 382 (struct ipmi_addr *) &smi_addr, 383 &send_msg); 384 if (rv) 385 goto out; 386 aer_addr = halt_recv_msg.msg.data[1]; 387 aer_lun = halt_recv_msg.msg.data[2]; 388 389 /* 390 * Setup IPMB address target instead of local target 391 */ 392 ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; 393 ipmb_addr.channel = 0; 394 ipmb_addr.slave_addr = aer_addr; 395 ipmb_addr.lun = aer_lun; 396 397 /* 398 * Send request hotswap control to remove blade from dpv 399 */ 400 send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; 401 send_msg.cmd = OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL; 402 send_msg.data = &hotswap_ipmb; 403 send_msg.data_len = 1; 404 ipmi_request_in_rc_mode(user, 405 (struct ipmi_addr *) &ipmb_addr, 406 &send_msg); 407 408 /* 409 * Set reset asserted 410 */ 411 send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; 412 send_msg.cmd = OEM_GRP_CMD_SET_RESET_STATE; 413 send_msg.data = data; 414 data[0] = 1; /* Reset asserted state */ 415 send_msg.data_len = 1; 416 rv = ipmi_request_in_rc_mode(user, 417 (struct ipmi_addr *) &smi_addr, 418 &send_msg); 419 if (rv) 420 goto out; 421 422 /* 423 * Power down 424 */ 425 send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; 426 send_msg.cmd = OEM_GRP_CMD_SET_POWER_STATE; 427 send_msg.data = data; 428 data[0] = 1; /* Power down state */ 429 send_msg.data_len = 1; 430 rv = ipmi_request_in_rc_mode(user, 431 (struct ipmi_addr *) &smi_addr, 432 &send_msg); 433 if (rv) 434 goto out; 435 436 out: 437 return; 438 } 439 440 /* 441 * ipmi_dell_chassis_detect() 442 * Dell systems with IPMI < 1.5 don't set the chassis capability bit 443 * but they can handle a chassis poweroff or powercycle command. 444 */ 445 446 #define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00} 447 static int ipmi_dell_chassis_detect(ipmi_user_t user) 448 { 449 const char ipmi_version_major = ipmi_version & 0xF; 450 const char ipmi_version_minor = (ipmi_version >> 4) & 0xF; 451 const char mfr[3] = DELL_IANA_MFR_ID; 452 if (!memcmp(mfr, &mfg_id, sizeof(mfr)) && 453 ipmi_version_major <= 1 && 454 ipmi_version_minor < 5) 455 return 1; 456 return 0; 457 } 458 459 /* 460 * Standard chassis support 461 */ 462 463 #define IPMI_NETFN_CHASSIS_REQUEST 0 464 #define IPMI_CHASSIS_CONTROL_CMD 0x02 465 466 static int ipmi_chassis_detect(ipmi_user_t user) 467 { 468 /* Chassis support, use it. */ 469 return (capabilities & 0x80); 470 } 471 472 static void ipmi_poweroff_chassis(ipmi_user_t user) 473 { 474 struct ipmi_system_interface_addr smi_addr; 475 struct kernel_ipmi_msg send_msg; 476 int rv; 477 unsigned char data[1]; 478 479 /* 480 * Configure IPMI address for local access 481 */ 482 smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; 483 smi_addr.channel = IPMI_BMC_CHANNEL; 484 smi_addr.lun = 0; 485 486 powercyclefailed: 487 printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n", 488 (poweroff_powercycle ? "cycle" : "down")); 489 490 /* 491 * Power down 492 */ 493 send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST; 494 send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD; 495 if (poweroff_powercycle) 496 data[0] = IPMI_CHASSIS_POWER_CYCLE; 497 else 498 data[0] = IPMI_CHASSIS_POWER_DOWN; 499 send_msg.data = data; 500 send_msg.data_len = sizeof(data); 501 rv = ipmi_request_in_rc_mode(user, 502 (struct ipmi_addr *) &smi_addr, 503 &send_msg); 504 if (rv) { 505 if (poweroff_powercycle) { 506 /* power cycle failed, default to power down */ 507 printk(KERN_ERR PFX "Unable to send chassis power " \ 508 "cycle message, IPMI error 0x%x\n", rv); 509 poweroff_powercycle = 0; 510 goto powercyclefailed; 511 } 512 513 printk(KERN_ERR PFX "Unable to send chassis power " \ 514 "down message, IPMI error 0x%x\n", rv); 515 } 516 } 517 518 519 /* Table of possible power off functions. */ 520 struct poweroff_function { 521 char *platform_type; 522 int (*detect)(ipmi_user_t user); 523 void (*poweroff_func)(ipmi_user_t user); 524 }; 525 526 static struct poweroff_function poweroff_functions[] = { 527 { .platform_type = "ATCA", 528 .detect = ipmi_atca_detect, 529 .poweroff_func = ipmi_poweroff_atca }, 530 { .platform_type = "CPI1", 531 .detect = ipmi_cpi1_detect, 532 .poweroff_func = ipmi_poweroff_cpi1 }, 533 { .platform_type = "chassis", 534 .detect = ipmi_dell_chassis_detect, 535 .poweroff_func = ipmi_poweroff_chassis }, 536 /* Chassis should generally be last, other things should override 537 it. */ 538 { .platform_type = "chassis", 539 .detect = ipmi_chassis_detect, 540 .poweroff_func = ipmi_poweroff_chassis }, 541 }; 542 #define NUM_PO_FUNCS (sizeof(poweroff_functions) \ 543 / sizeof(struct poweroff_function)) 544 545 546 /* Called on a powerdown request. */ 547 static void ipmi_poweroff_function(void) 548 { 549 if (!ready) 550 return; 551 552 /* Use run-to-completion mode, since interrupts may be off. */ 553 specific_poweroff_func(ipmi_user); 554 } 555 556 /* Wait for an IPMI interface to be installed, the first one installed 557 will be grabbed by this code and used to perform the powerdown. */ 558 static void ipmi_po_new_smi(int if_num, struct device *device) 559 { 560 struct ipmi_system_interface_addr smi_addr; 561 struct kernel_ipmi_msg send_msg; 562 int rv; 563 int i; 564 565 if (ready) 566 return; 567 568 if ((ifnum_to_use >= 0) && (ifnum_to_use != if_num)) 569 return; 570 571 rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL, 572 &ipmi_user); 573 if (rv) { 574 printk(KERN_ERR PFX "could not create IPMI user, error %d\n", 575 rv); 576 return; 577 } 578 579 ipmi_ifnum = if_num; 580 581 /* 582 * Do a get device ide and store some results, since this is 583 * used by several functions. 584 */ 585 smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; 586 smi_addr.channel = IPMI_BMC_CHANNEL; 587 smi_addr.lun = 0; 588 589 send_msg.netfn = IPMI_NETFN_APP_REQUEST; 590 send_msg.cmd = IPMI_GET_DEVICE_ID_CMD; 591 send_msg.data = NULL; 592 send_msg.data_len = 0; 593 rv = ipmi_request_wait_for_response(ipmi_user, 594 (struct ipmi_addr *) &smi_addr, 595 &send_msg); 596 if (rv) { 597 printk(KERN_ERR PFX "Unable to send IPMI get device id info," 598 " IPMI error 0x%x\n", rv); 599 goto out_err; 600 } 601 602 if (halt_recv_msg.msg.data_len < 12) { 603 printk(KERN_ERR PFX "(chassis) IPMI get device id info too," 604 " short, was %d bytes, needed %d bytes\n", 605 halt_recv_msg.msg.data_len, 12); 606 goto out_err; 607 } 608 609 mfg_id = (halt_recv_msg.msg.data[7] 610 | (halt_recv_msg.msg.data[8] << 8) 611 | (halt_recv_msg.msg.data[9] << 16)); 612 prod_id = (halt_recv_msg.msg.data[10] 613 | (halt_recv_msg.msg.data[11] << 8)); 614 capabilities = halt_recv_msg.msg.data[6]; 615 ipmi_version = halt_recv_msg.msg.data[5]; 616 617 618 /* Scan for a poweroff method */ 619 for (i = 0; i < NUM_PO_FUNCS; i++) { 620 if (poweroff_functions[i].detect(ipmi_user)) 621 goto found; 622 } 623 624 out_err: 625 printk(KERN_ERR PFX "Unable to find a poweroff function that" 626 " will work, giving up\n"); 627 ipmi_destroy_user(ipmi_user); 628 return; 629 630 found: 631 printk(KERN_INFO PFX "Found a %s style poweroff function\n", 632 poweroff_functions[i].platform_type); 633 specific_poweroff_func = poweroff_functions[i].poweroff_func; 634 old_poweroff_func = pm_power_off; 635 pm_power_off = ipmi_poweroff_function; 636 ready = 1; 637 } 638 639 static void ipmi_po_smi_gone(int if_num) 640 { 641 if (!ready) 642 return; 643 644 if (ipmi_ifnum != if_num) 645 return; 646 647 ready = 0; 648 ipmi_destroy_user(ipmi_user); 649 pm_power_off = old_poweroff_func; 650 } 651 652 static struct ipmi_smi_watcher smi_watcher = { 653 .owner = THIS_MODULE, 654 .new_smi = ipmi_po_new_smi, 655 .smi_gone = ipmi_po_smi_gone 656 }; 657 658 659 #ifdef CONFIG_PROC_FS 660 #include <linux/sysctl.h> 661 662 static struct ctl_table ipmi_table[] = { 663 { .procname = "poweroff_powercycle", 664 .data = &poweroff_powercycle, 665 .maxlen = sizeof(poweroff_powercycle), 666 .mode = 0644, 667 .proc_handler = proc_dointvec }, 668 { } 669 }; 670 671 static struct ctl_table ipmi_dir_table[] = { 672 { .procname = "ipmi", 673 .mode = 0555, 674 .child = ipmi_table }, 675 { } 676 }; 677 678 static struct ctl_table ipmi_root_table[] = { 679 { .procname = "dev", 680 .mode = 0555, 681 .child = ipmi_dir_table }, 682 { } 683 }; 684 685 static struct ctl_table_header *ipmi_table_header; 686 #endif /* CONFIG_PROC_FS */ 687 688 /* 689 * Startup and shutdown functions. 690 */ 691 static int __init ipmi_poweroff_init(void) 692 { 693 int rv; 694 695 printk(KERN_INFO "Copyright (C) 2004 MontaVista Software -" 696 " IPMI Powerdown via sys_reboot.\n"); 697 698 if (poweroff_powercycle) 699 printk(KERN_INFO PFX "Power cycle is enabled.\n"); 700 701 #ifdef CONFIG_PROC_FS 702 ipmi_table_header = register_sysctl_table(ipmi_root_table); 703 if (!ipmi_table_header) { 704 printk(KERN_ERR PFX "Unable to register powercycle sysctl\n"); 705 rv = -ENOMEM; 706 goto out_err; 707 } 708 #endif 709 710 rv = ipmi_smi_watcher_register(&smi_watcher); 711 712 #ifdef CONFIG_PROC_FS 713 if (rv) { 714 unregister_sysctl_table(ipmi_table_header); 715 printk(KERN_ERR PFX "Unable to register SMI watcher: %d\n", rv); 716 goto out_err; 717 } 718 719 out_err: 720 #endif 721 return rv; 722 } 723 724 #ifdef MODULE 725 static void __exit ipmi_poweroff_cleanup(void) 726 { 727 int rv; 728 729 #ifdef CONFIG_PROC_FS 730 unregister_sysctl_table(ipmi_table_header); 731 #endif 732 733 ipmi_smi_watcher_unregister(&smi_watcher); 734 735 if (ready) { 736 rv = ipmi_destroy_user(ipmi_user); 737 if (rv) 738 printk(KERN_ERR PFX "could not cleanup the IPMI" 739 " user: 0x%x\n", rv); 740 pm_power_off = old_poweroff_func; 741 } 742 } 743 module_exit(ipmi_poweroff_cleanup); 744 #endif 745 746 module_init(ipmi_poweroff_init); 747 MODULE_LICENSE("GPL"); 748 MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); 749 MODULE_DESCRIPTION("IPMI Poweroff extension to sys_reboot"); 750