1 /* 2 * Copyright (c) 2015-2016, IBM Corporation. 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License 6 * as published by the Free Software Foundation; either version 7 * 2 of the License, or (at your option) any later version. 8 */ 9 10 #include <linux/atomic.h> 11 #include <linux/bt-bmc.h> 12 #include <linux/errno.h> 13 #include <linux/interrupt.h> 14 #include <linux/io.h> 15 #include <linux/mfd/syscon.h> 16 #include <linux/miscdevice.h> 17 #include <linux/module.h> 18 #include <linux/of.h> 19 #include <linux/platform_device.h> 20 #include <linux/poll.h> 21 #include <linux/regmap.h> 22 #include <linux/sched.h> 23 #include <linux/timer.h> 24 25 /* 26 * This is a BMC device used to communicate to the host 27 */ 28 #define DEVICE_NAME "ipmi-bt-host" 29 30 #define BT_IO_BASE 0xe4 31 #define BT_IRQ 10 32 33 #define BT_CR0 0x0 34 #define BT_CR0_IO_BASE 16 35 #define BT_CR0_IRQ 12 36 #define BT_CR0_EN_CLR_SLV_RDP 0x8 37 #define BT_CR0_EN_CLR_SLV_WRP 0x4 38 #define BT_CR0_ENABLE_IBT 0x1 39 #define BT_CR1 0x4 40 #define BT_CR1_IRQ_H2B 0x01 41 #define BT_CR1_IRQ_HBUSY 0x40 42 #define BT_CR2 0x8 43 #define BT_CR2_IRQ_H2B 0x01 44 #define BT_CR2_IRQ_HBUSY 0x40 45 #define BT_CR3 0xc 46 #define BT_CTRL 0x10 47 #define BT_CTRL_B_BUSY 0x80 48 #define BT_CTRL_H_BUSY 0x40 49 #define BT_CTRL_OEM0 0x20 50 #define BT_CTRL_SMS_ATN 0x10 51 #define BT_CTRL_B2H_ATN 0x08 52 #define BT_CTRL_H2B_ATN 0x04 53 #define BT_CTRL_CLR_RD_PTR 0x02 54 #define BT_CTRL_CLR_WR_PTR 0x01 55 #define BT_BMC2HOST 0x14 56 #define BT_INTMASK 0x18 57 #define BT_INTMASK_B2H_IRQEN 0x01 58 #define BT_INTMASK_B2H_IRQ 0x02 59 #define BT_INTMASK_BMC_HWRST 0x80 60 61 #define BT_BMC_BUFFER_SIZE 256 62 63 struct bt_bmc { 64 struct device dev; 65 struct miscdevice miscdev; 66 struct regmap *map; 67 int offset; 68 int irq; 69 wait_queue_head_t queue; 70 struct timer_list poll_timer; 71 struct mutex mutex; 72 }; 73 74 static atomic_t open_count = ATOMIC_INIT(0); 75 76 static const struct regmap_config bt_regmap_cfg = { 77 .reg_bits = 32, 78 .val_bits = 32, 79 .reg_stride = 4, 80 }; 81 82 static u8 bt_inb(struct bt_bmc *bt_bmc, int reg) 83 { 84 uint32_t val = 0; 85 int rc; 86 87 rc = regmap_read(bt_bmc->map, bt_bmc->offset + reg, &val); 88 WARN(rc != 0, "regmap_read() failed: %d\n", rc); 89 90 return rc == 0 ? (u8) val : 0; 91 } 92 93 static void bt_outb(struct bt_bmc *bt_bmc, u8 data, int reg) 94 { 95 int rc; 96 97 rc = regmap_write(bt_bmc->map, bt_bmc->offset + reg, data); 98 WARN(rc != 0, "regmap_write() failed: %d\n", rc); 99 } 100 101 static void clr_rd_ptr(struct bt_bmc *bt_bmc) 102 { 103 bt_outb(bt_bmc, BT_CTRL_CLR_RD_PTR, BT_CTRL); 104 } 105 106 static void clr_wr_ptr(struct bt_bmc *bt_bmc) 107 { 108 bt_outb(bt_bmc, BT_CTRL_CLR_WR_PTR, BT_CTRL); 109 } 110 111 static void clr_h2b_atn(struct bt_bmc *bt_bmc) 112 { 113 bt_outb(bt_bmc, BT_CTRL_H2B_ATN, BT_CTRL); 114 } 115 116 static void set_b_busy(struct bt_bmc *bt_bmc) 117 { 118 if (!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY)) 119 bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); 120 } 121 122 static void clr_b_busy(struct bt_bmc *bt_bmc) 123 { 124 if (bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY) 125 bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); 126 } 127 128 static void set_b2h_atn(struct bt_bmc *bt_bmc) 129 { 130 bt_outb(bt_bmc, BT_CTRL_B2H_ATN, BT_CTRL); 131 } 132 133 static u8 bt_read(struct bt_bmc *bt_bmc) 134 { 135 return bt_inb(bt_bmc, BT_BMC2HOST); 136 } 137 138 static ssize_t bt_readn(struct bt_bmc *bt_bmc, u8 *buf, size_t n) 139 { 140 int i; 141 142 for (i = 0; i < n; i++) 143 buf[i] = bt_read(bt_bmc); 144 return n; 145 } 146 147 static void bt_write(struct bt_bmc *bt_bmc, u8 c) 148 { 149 bt_outb(bt_bmc, c, BT_BMC2HOST); 150 } 151 152 static ssize_t bt_writen(struct bt_bmc *bt_bmc, u8 *buf, size_t n) 153 { 154 int i; 155 156 for (i = 0; i < n; i++) 157 bt_write(bt_bmc, buf[i]); 158 return n; 159 } 160 161 static void set_sms_atn(struct bt_bmc *bt_bmc) 162 { 163 bt_outb(bt_bmc, BT_CTRL_SMS_ATN, BT_CTRL); 164 } 165 166 static struct bt_bmc *file_bt_bmc(struct file *file) 167 { 168 return container_of(file->private_data, struct bt_bmc, miscdev); 169 } 170 171 static int bt_bmc_open(struct inode *inode, struct file *file) 172 { 173 struct bt_bmc *bt_bmc = file_bt_bmc(file); 174 175 if (atomic_inc_return(&open_count) == 1) { 176 clr_b_busy(bt_bmc); 177 return 0; 178 } 179 180 atomic_dec(&open_count); 181 return -EBUSY; 182 } 183 184 /* 185 * The BT (Block Transfer) interface means that entire messages are 186 * buffered by the host before a notification is sent to the BMC that 187 * there is data to be read. The first byte is the length and the 188 * message data follows. The read operation just tries to capture the 189 * whole before returning it to userspace. 190 * 191 * BT Message format : 192 * 193 * Byte 1 Byte 2 Byte 3 Byte 4 Byte 5:N 194 * Length NetFn/LUN Seq Cmd Data 195 * 196 */ 197 static ssize_t bt_bmc_read(struct file *file, char __user *buf, 198 size_t count, loff_t *ppos) 199 { 200 struct bt_bmc *bt_bmc = file_bt_bmc(file); 201 u8 len; 202 int len_byte = 1; 203 u8 kbuffer[BT_BMC_BUFFER_SIZE]; 204 ssize_t ret = 0; 205 ssize_t nread; 206 207 WARN_ON(*ppos); 208 209 if (wait_event_interruptible(bt_bmc->queue, 210 bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN)) 211 return -ERESTARTSYS; 212 213 mutex_lock(&bt_bmc->mutex); 214 215 if (unlikely(!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN))) { 216 ret = -EIO; 217 goto out_unlock; 218 } 219 220 set_b_busy(bt_bmc); 221 clr_h2b_atn(bt_bmc); 222 clr_rd_ptr(bt_bmc); 223 224 /* 225 * The BT frames start with the message length, which does not 226 * include the length byte. 227 */ 228 kbuffer[0] = bt_read(bt_bmc); 229 len = kbuffer[0]; 230 231 /* We pass the length back to userspace as well */ 232 if (len + 1 > count) 233 len = count - 1; 234 235 while (len) { 236 nread = min_t(ssize_t, len, sizeof(kbuffer) - len_byte); 237 238 bt_readn(bt_bmc, kbuffer + len_byte, nread); 239 240 if (copy_to_user(buf, kbuffer, nread + len_byte)) { 241 ret = -EFAULT; 242 break; 243 } 244 len -= nread; 245 buf += nread + len_byte; 246 ret += nread + len_byte; 247 len_byte = 0; 248 } 249 250 clr_b_busy(bt_bmc); 251 252 out_unlock: 253 mutex_unlock(&bt_bmc->mutex); 254 return ret; 255 } 256 257 /* 258 * BT Message response format : 259 * 260 * Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6:N 261 * Length NetFn/LUN Seq Cmd Code Data 262 */ 263 static ssize_t bt_bmc_write(struct file *file, const char __user *buf, 264 size_t count, loff_t *ppos) 265 { 266 struct bt_bmc *bt_bmc = file_bt_bmc(file); 267 u8 kbuffer[BT_BMC_BUFFER_SIZE]; 268 ssize_t ret = 0; 269 ssize_t nwritten; 270 271 /* 272 * send a minimum response size 273 */ 274 if (count < 5) 275 return -EINVAL; 276 277 WARN_ON(*ppos); 278 279 /* 280 * There's no interrupt for clearing bmc busy so we have to 281 * poll 282 */ 283 if (wait_event_interruptible(bt_bmc->queue, 284 !(bt_inb(bt_bmc, BT_CTRL) & 285 (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN)))) 286 return -ERESTARTSYS; 287 288 mutex_lock(&bt_bmc->mutex); 289 290 if (unlikely(bt_inb(bt_bmc, BT_CTRL) & 291 (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) { 292 ret = -EIO; 293 goto out_unlock; 294 } 295 296 clr_wr_ptr(bt_bmc); 297 298 while (count) { 299 nwritten = min_t(ssize_t, count, sizeof(kbuffer)); 300 if (copy_from_user(&kbuffer, buf, nwritten)) { 301 ret = -EFAULT; 302 break; 303 } 304 305 bt_writen(bt_bmc, kbuffer, nwritten); 306 307 count -= nwritten; 308 buf += nwritten; 309 ret += nwritten; 310 } 311 312 set_b2h_atn(bt_bmc); 313 314 out_unlock: 315 mutex_unlock(&bt_bmc->mutex); 316 return ret; 317 } 318 319 static long bt_bmc_ioctl(struct file *file, unsigned int cmd, 320 unsigned long param) 321 { 322 struct bt_bmc *bt_bmc = file_bt_bmc(file); 323 324 switch (cmd) { 325 case BT_BMC_IOCTL_SMS_ATN: 326 set_sms_atn(bt_bmc); 327 return 0; 328 } 329 return -EINVAL; 330 } 331 332 static int bt_bmc_release(struct inode *inode, struct file *file) 333 { 334 struct bt_bmc *bt_bmc = file_bt_bmc(file); 335 336 atomic_dec(&open_count); 337 set_b_busy(bt_bmc); 338 return 0; 339 } 340 341 static unsigned int bt_bmc_poll(struct file *file, poll_table *wait) 342 { 343 struct bt_bmc *bt_bmc = file_bt_bmc(file); 344 unsigned int mask = 0; 345 u8 ctrl; 346 347 poll_wait(file, &bt_bmc->queue, wait); 348 349 ctrl = bt_inb(bt_bmc, BT_CTRL); 350 351 if (ctrl & BT_CTRL_H2B_ATN) 352 mask |= POLLIN; 353 354 if (!(ctrl & (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) 355 mask |= POLLOUT; 356 357 return mask; 358 } 359 360 static const struct file_operations bt_bmc_fops = { 361 .owner = THIS_MODULE, 362 .open = bt_bmc_open, 363 .read = bt_bmc_read, 364 .write = bt_bmc_write, 365 .release = bt_bmc_release, 366 .poll = bt_bmc_poll, 367 .unlocked_ioctl = bt_bmc_ioctl, 368 }; 369 370 static void poll_timer(struct timer_list *t) 371 { 372 struct bt_bmc *bt_bmc = from_timer(bt_bmc, t, poll_timer); 373 374 bt_bmc->poll_timer.expires += msecs_to_jiffies(500); 375 wake_up(&bt_bmc->queue); 376 add_timer(&bt_bmc->poll_timer); 377 } 378 379 static irqreturn_t bt_bmc_irq(int irq, void *arg) 380 { 381 struct bt_bmc *bt_bmc = arg; 382 u32 reg; 383 int rc; 384 385 rc = regmap_read(bt_bmc->map, bt_bmc->offset + BT_CR2, ®); 386 if (rc) 387 return IRQ_NONE; 388 389 reg &= BT_CR2_IRQ_H2B | BT_CR2_IRQ_HBUSY; 390 if (!reg) 391 return IRQ_NONE; 392 393 /* ack pending IRQs */ 394 regmap_write(bt_bmc->map, bt_bmc->offset + BT_CR2, reg); 395 396 wake_up(&bt_bmc->queue); 397 return IRQ_HANDLED; 398 } 399 400 static int bt_bmc_config_irq(struct bt_bmc *bt_bmc, 401 struct platform_device *pdev) 402 { 403 struct device *dev = &pdev->dev; 404 int rc; 405 406 bt_bmc->irq = platform_get_irq(pdev, 0); 407 if (!bt_bmc->irq) 408 return -ENODEV; 409 410 rc = devm_request_irq(dev, bt_bmc->irq, bt_bmc_irq, IRQF_SHARED, 411 DEVICE_NAME, bt_bmc); 412 if (rc < 0) { 413 dev_warn(dev, "Unable to request IRQ %d\n", bt_bmc->irq); 414 bt_bmc->irq = 0; 415 return rc; 416 } 417 418 /* 419 * Configure IRQs on the bmc clearing the H2B and HBUSY bits; 420 * H2B will be asserted when the bmc has data for us; HBUSY 421 * will be cleared (along with B2H) when we can write the next 422 * message to the BT buffer 423 */ 424 rc = regmap_update_bits(bt_bmc->map, bt_bmc->offset + BT_CR1, 425 (BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY), 426 (BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY)); 427 428 return rc; 429 } 430 431 static int bt_bmc_probe(struct platform_device *pdev) 432 { 433 struct bt_bmc *bt_bmc; 434 struct device *dev; 435 int rc; 436 437 if (!pdev || !pdev->dev.of_node) 438 return -ENODEV; 439 440 dev = &pdev->dev; 441 dev_info(dev, "Found bt bmc device\n"); 442 443 bt_bmc = devm_kzalloc(dev, sizeof(*bt_bmc), GFP_KERNEL); 444 if (!bt_bmc) 445 return -ENOMEM; 446 447 dev_set_drvdata(&pdev->dev, bt_bmc); 448 449 bt_bmc->map = syscon_node_to_regmap(pdev->dev.parent->of_node); 450 if (IS_ERR(bt_bmc->map)) { 451 struct resource *res; 452 void __iomem *base; 453 454 /* 455 * Assume it's not the MFD-based devicetree description, in 456 * which case generate a regmap ourselves 457 */ 458 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 459 base = devm_ioremap_resource(&pdev->dev, res); 460 if (IS_ERR(base)) 461 return PTR_ERR(base); 462 463 bt_bmc->map = devm_regmap_init_mmio(dev, base, &bt_regmap_cfg); 464 bt_bmc->offset = 0; 465 } else { 466 rc = of_property_read_u32(dev->of_node, "reg", &bt_bmc->offset); 467 if (rc) 468 return rc; 469 } 470 471 mutex_init(&bt_bmc->mutex); 472 init_waitqueue_head(&bt_bmc->queue); 473 474 bt_bmc->miscdev.minor = MISC_DYNAMIC_MINOR, 475 bt_bmc->miscdev.name = DEVICE_NAME, 476 bt_bmc->miscdev.fops = &bt_bmc_fops, 477 bt_bmc->miscdev.parent = dev; 478 rc = misc_register(&bt_bmc->miscdev); 479 if (rc) { 480 dev_err(dev, "Unable to register misc device\n"); 481 return rc; 482 } 483 484 bt_bmc_config_irq(bt_bmc, pdev); 485 486 if (bt_bmc->irq) { 487 dev_info(dev, "Using IRQ %d\n", bt_bmc->irq); 488 } else { 489 dev_info(dev, "No IRQ; using timer\n"); 490 timer_setup(&bt_bmc->poll_timer, poll_timer, 0); 491 bt_bmc->poll_timer.expires = jiffies + msecs_to_jiffies(10); 492 add_timer(&bt_bmc->poll_timer); 493 } 494 495 regmap_write(bt_bmc->map, bt_bmc->offset + BT_CR0, 496 (BT_IO_BASE << BT_CR0_IO_BASE) | 497 (BT_IRQ << BT_CR0_IRQ) | 498 BT_CR0_EN_CLR_SLV_RDP | 499 BT_CR0_EN_CLR_SLV_WRP | 500 BT_CR0_ENABLE_IBT); 501 502 clr_b_busy(bt_bmc); 503 504 return 0; 505 } 506 507 static int bt_bmc_remove(struct platform_device *pdev) 508 { 509 struct bt_bmc *bt_bmc = dev_get_drvdata(&pdev->dev); 510 511 misc_deregister(&bt_bmc->miscdev); 512 if (!bt_bmc->irq) 513 del_timer_sync(&bt_bmc->poll_timer); 514 return 0; 515 } 516 517 static const struct of_device_id bt_bmc_match[] = { 518 { .compatible = "aspeed,ast2400-ibt-bmc" }, 519 { .compatible = "aspeed,ast2500-ibt-bmc" }, 520 { }, 521 }; 522 523 static struct platform_driver bt_bmc_driver = { 524 .driver = { 525 .name = DEVICE_NAME, 526 .of_match_table = bt_bmc_match, 527 }, 528 .probe = bt_bmc_probe, 529 .remove = bt_bmc_remove, 530 }; 531 532 module_platform_driver(bt_bmc_driver); 533 534 MODULE_DEVICE_TABLE(of, bt_bmc_match); 535 MODULE_LICENSE("GPL"); 536 MODULE_AUTHOR("Alistair Popple <alistair@popple.id.au>"); 537 MODULE_DESCRIPTION("Linux device interface to the IPMI BT interface"); 538