1# 2# IPMI device configuration 3# 4 5menuconfig IPMI_HANDLER 6 tristate 'IPMI top-level message handler' 7 depends on HAS_IOMEM 8 help 9 This enables the central IPMI message handler, required for IPMI 10 to work. 11 12 IPMI is a standard for managing sensors (temperature, 13 voltage, etc.) in a system. 14 15 See <file:Documentation/IPMI.txt> for more details on the driver. 16 17 If unsure, say N. 18 19if IPMI_HANDLER 20 21config IPMI_PANIC_EVENT 22 bool 'Generate a panic event to all BMCs on a panic' 23 help 24 When a panic occurs, this will cause the IPMI message handler to 25 generate an IPMI event describing the panic to each interface 26 registered with the message handler. 27 28config IPMI_PANIC_STRING 29 bool 'Generate OEM events containing the panic string' 30 depends on IPMI_PANIC_EVENT 31 help 32 When a panic occurs, this will cause the IPMI message handler to 33 generate IPMI OEM type f0 events holding the IPMB address of the 34 panic generator (byte 4 of the event), a sequence number for the 35 string (byte 5 of the event) and part of the string (the rest of the 36 event). Bytes 1, 2, and 3 are the normal usage for an OEM event. 37 You can fetch these events and use the sequence numbers to piece the 38 string together. 39 40config IPMI_DEVICE_INTERFACE 41 tristate 'Device interface for IPMI' 42 help 43 This provides an IOCTL interface to the IPMI message handler so 44 userland processes may use IPMI. It supports poll() and select(). 45 46config IPMI_SI 47 tristate 'IPMI System Interface handler' 48 help 49 Provides a driver for System Interfaces (KCS, SMIC, BT). 50 Currently, only KCS and SMIC are supported. If 51 you are using IPMI, you should probably say "y" here. 52 53config IPMI_SSIF 54 tristate 'IPMI SMBus handler (SSIF)' 55 select I2C 56 help 57 Provides a driver for a SMBus interface to a BMC, meaning that you 58 have a driver that must be accessed over an I2C bus instead of a 59 standard interface. This module requires I2C support. 60 61config IPMI_POWERNV 62 depends on PPC_POWERNV 63 tristate 'POWERNV (OPAL firmware) IPMI interface' 64 help 65 Provides a driver for OPAL firmware-based IPMI interfaces. 66 67config IPMI_WATCHDOG 68 tristate 'IPMI Watchdog Timer' 69 help 70 This enables the IPMI watchdog timer. 71 72config IPMI_POWEROFF 73 tristate 'IPMI Poweroff' 74 help 75 This enables a function to power off the system with IPMI if 76 the IPMI management controller is capable of this. 77 78endif # IPMI_HANDLER 79 80config ASPEED_BT_IPMI_BMC 81 depends on ARCH_ASPEED 82 tristate "BT IPMI bmc driver" 83 help 84 Provides a driver for the BT (Block Transfer) IPMI interface 85 found on Aspeed SOCs (AST2400 and AST2500). The driver 86 implements the BMC side of the BT interface. 87