xref: /openbmc/linux/drivers/char/ipmi/Kconfig (revision a20eefae) 
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# IPMI device configuration
4#
5
6menuconfig IPMI_HANDLER
7       tristate 'IPMI top-level message handler'
8       depends on HAS_IOMEM
9       select IPMI_DMI_DECODE if DMI
10       help
11         This enables the central IPMI message handler, required for IPMI
12	 to work.
13
14         IPMI is a standard for managing sensors (temperature,
15         voltage, etc.) in a system.
16
17         See <file:Documentation/IPMI.txt> for more details on the driver.
18
19	 If unsure, say N.
20
21config IPMI_DMI_DECODE
22       select IPMI_PLAT_DATA
23       bool
24
25config IPMI_PLAT_DATA
26       bool
27
28if IPMI_HANDLER
29
30config IPMI_PANIC_EVENT
31       bool 'Generate a panic event to all BMCs on a panic'
32       help
33	 When a panic occurs, this will cause the IPMI message handler to,
34	 by default, generate an IPMI event describing the panic to each
35	 interface registered with the message handler.  This is always
36	 available, the module parameter for ipmi_msghandler named
37	 panic_op can be set to "event" to chose this value, this config
38	 simply causes the default value to be set to "event".
39
40config IPMI_PANIC_STRING
41	bool 'Generate OEM events containing the panic string'
42	depends on IPMI_PANIC_EVENT
43	help
44	  When a panic occurs, this will cause the IPMI message handler to,
45	  by default, generate IPMI OEM type f0 events holding the IPMB
46	  address of the panic generator (byte 4 of the event), a sequence
47	  number for the string (byte 5 of the event) and part of the
48	  string (the rest of the event).  Bytes 1, 2, and 3 are the normal
49	  usage for an OEM event.  You can fetch these events and use the
50	  sequence numbers to piece the string together.  This config
51	  parameter sets the default value to generate these events,
52	  the module parameter for ipmi_msghandler named panic_op can
53	  be set to "string" to chose this value, this config simply
54	  causes the default value to be set to "string".
55
56config IPMI_DEVICE_INTERFACE
57       tristate 'Device interface for IPMI'
58       help
59         This provides an IOCTL interface to the IPMI message handler so
60	 userland processes may use IPMI.  It supports poll() and select().
61
62config IPMI_SI
63       tristate 'IPMI System Interface handler'
64       select IPMI_PLAT_DATA
65       help
66         Provides a driver for System Interfaces (KCS, SMIC, BT).
67	 Currently, only KCS and SMIC are supported.  If
68	 you are using IPMI, you should probably say "y" here.
69
70config IPMI_SSIF
71       tristate 'IPMI SMBus handler (SSIF)'
72       select I2C
73       help
74         Provides a driver for a SMBus interface to a BMC, meaning that you
75	 have a driver that must be accessed over an I2C bus instead of a
76	 standard interface.  This module requires I2C support.
77
78config IPMI_POWERNV
79       depends on PPC_POWERNV
80       tristate 'POWERNV (OPAL firmware) IPMI interface'
81       help
82         Provides a driver for OPAL firmware-based IPMI interfaces.
83
84config IPMI_WATCHDOG
85       tristate 'IPMI Watchdog Timer'
86       help
87         This enables the IPMI watchdog timer.
88
89config IPMI_POWEROFF
90       tristate 'IPMI Poweroff'
91       help
92         This enables a function to power off the system with IPMI if
93	 the IPMI management controller is capable of this.
94
95endif # IPMI_HANDLER
96
97config IPMI_KCS_BMC
98	tristate
99
100config ASPEED_KCS_IPMI_BMC
101	depends on ARCH_ASPEED || COMPILE_TEST
102	select IPMI_KCS_BMC
103	select REGMAP_MMIO
104	tristate "Aspeed KCS IPMI BMC driver"
105	help
106	  Provides a driver for the KCS (Keyboard Controller Style) IPMI
107	  interface found on Aspeed SOCs (AST2400 and AST2500).
108
109	  The driver implements the BMC side of the KCS contorller, it
110	  provides the access of KCS IO space for BMC side.
111
112config NPCM7XX_KCS_IPMI_BMC
113	depends on ARCH_NPCM7XX || COMPILE_TEST
114	select IPMI_KCS_BMC
115	select REGMAP_MMIO
116	tristate "NPCM7xx KCS IPMI BMC driver"
117	help
118	  Provides a driver for the KCS (Keyboard Controller Style) IPMI
119	  interface found on Nuvoton NPCM7xx SOCs.
120
121	  The driver implements the BMC side of the KCS contorller, it
122	  provides the access of KCS IO space for BMC side.
123
124	  This support is also available as a module.  If so, the module
125	  will be called kcs_bmc_npcm7xx.
126
127config ASPEED_BT_IPMI_BMC
128	depends on ARCH_ASPEED || COMPILE_TEST
129       depends on REGMAP && REGMAP_MMIO && MFD_SYSCON
130	tristate "BT IPMI bmc driver"
131	help
132	  Provides a driver for the BT (Block Transfer) IPMI interface
133	  found on Aspeed SOCs (AST2400 and AST2500). The driver
134	  implements the BMC side of the BT interface.
135
136config IPMB_DEVICE_INTERFACE
137	tristate 'IPMB Interface handler'
138	depends on I2C
139	depends on I2C_SLAVE
140	help
141	  Provides a driver for a device (Satellite MC) to
142	  receive requests and send responses back to the BMC via
143	  the IPMB interface. This module requires I2C support.
144