xref: /openbmc/linux/drivers/char/ipmi/Kconfig (revision 6b342707)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# IPMI device configuration
4#
5
6menuconfig IPMI_HANDLER
7	tristate 'IPMI top-level message handler'
8	depends on HAS_IOMEM
9	select IPMI_DMI_DECODE if DMI
10	help
11	  This enables the central IPMI message handler, required for IPMI
12	  to work.
13
14	  IPMI is a standard for managing sensors (temperature,
15	  voltage, etc.) in a system.
16
17	  See <file:Documentation/driver-api/ipmi.rst> for more details on the driver.
18
19	  If unsure, say N.
20
21config IPMI_DMI_DECODE
22	select IPMI_PLAT_DATA
23	bool
24
25config IPMI_PLAT_DATA
26	bool
27
28if IPMI_HANDLER
29
30config IPMI_PANIC_EVENT
31	bool 'Generate a panic event to all BMCs on a panic'
32	help
33	  When a panic occurs, this will cause the IPMI message handler to,
34	  by default, generate an IPMI event describing the panic to each
35	  interface registered with the message handler.  This is always
36	  available, the module parameter for ipmi_msghandler named
37	  panic_op can be set to "event" to chose this value, this config
38	  simply causes the default value to be set to "event".
39
40config IPMI_PANIC_STRING
41	bool 'Generate OEM events containing the panic string'
42	depends on IPMI_PANIC_EVENT
43	help
44	  When a panic occurs, this will cause the IPMI message handler to,
45	  by default, generate IPMI OEM type f0 events holding the IPMB
46	  address of the panic generator (byte 4 of the event), a sequence
47	  number for the string (byte 5 of the event) and part of the
48	  string (the rest of the event).  Bytes 1, 2, and 3 are the normal
49	  usage for an OEM event.  You can fetch these events and use the
50	  sequence numbers to piece the string together.  This config
51	  parameter sets the default value to generate these events,
52	  the module parameter for ipmi_msghandler named panic_op can
53	  be set to "string" to chose this value, this config simply
54	  causes the default value to be set to "string".
55
56config IPMI_DEVICE_INTERFACE
57	tristate 'Device interface for IPMI'
58	help
59	  This provides an IOCTL interface to the IPMI message handler so
60	  userland processes may use IPMI.  It supports poll() and select().
61
62config IPMI_SI
63	tristate 'IPMI System Interface handler'
64	select IPMI_PLAT_DATA
65	help
66	  Provides a driver for System Interfaces (KCS, SMIC, BT).
67	  Currently, only KCS and SMIC are supported.  If
68	  you are using IPMI, you should probably say "y" here.
69
70config IPMI_SSIF
71	tristate 'IPMI SMBus handler (SSIF)'
72	depends on I2C
73	help
74	  Provides a driver for a SMBus interface to a BMC, meaning that you
75	  have a driver that must be accessed over an I2C bus instead of a
76	  standard interface.  This module requires I2C support.
77
78config IPMI_IPMB
79	tristate 'IPMI IPMB interface'
80	depends on I2C && I2C_SLAVE
81	help
82	  Provides a driver for a system running right on the IPMB bus.
83	  It supports normal system interface messages to a BMC on the IPMB
84	  bus, and it also supports direct messaging on the bus using
85	  IPMB direct messages.  This module requires I2C support.
86
87config IPMI_POWERNV
88	depends on PPC_POWERNV
89	tristate 'POWERNV (OPAL firmware) IPMI interface'
90	help
91	  Provides a driver for OPAL firmware-based IPMI interfaces.
92
93config IPMI_WATCHDOG
94	tristate 'IPMI Watchdog Timer'
95	help
96	  This enables the IPMI watchdog timer.
97
98config IPMI_POWEROFF
99	tristate 'IPMI Poweroff'
100	help
101	  This enables a function to power off the system with IPMI if
102	  the IPMI management controller is capable of this.
103
104endif # IPMI_HANDLER
105
106config IPMI_KCS_BMC
107	tristate
108
109config ASPEED_KCS_IPMI_BMC
110	depends on ARCH_ASPEED || COMPILE_TEST
111	select IPMI_KCS_BMC
112	select REGMAP_MMIO
113	tristate "Aspeed KCS IPMI BMC driver"
114	help
115	  Provides a driver for the KCS (Keyboard Controller Style) IPMI
116	  interface found on Aspeed SOCs (AST2400 and AST2500).
117
118	  The driver implements the BMC side of the KCS contorller, it
119	  provides the access of KCS IO space for BMC side.
120
121config NPCM7XX_KCS_IPMI_BMC
122	depends on ARCH_NPCM7XX || COMPILE_TEST
123	select IPMI_KCS_BMC
124	select REGMAP_MMIO
125	tristate "NPCM7xx KCS IPMI BMC driver"
126	help
127	  Provides a driver for the KCS (Keyboard Controller Style) IPMI
128	  interface found on Nuvoton NPCM7xx SOCs.
129
130	  The driver implements the BMC side of the KCS contorller, it
131	  provides the access of KCS IO space for BMC side.
132
133	  This support is also available as a module.  If so, the module
134	  will be called kcs_bmc_npcm7xx.
135
136config IPMI_KCS_BMC_CDEV_IPMI
137	depends on IPMI_KCS_BMC
138	tristate "IPMI character device interface for BMC KCS devices"
139	help
140	  Provides a BMC-side character device implementing IPMI
141	  semantics for KCS IPMI devices.
142
143	  Say YES if you wish to expose KCS devices on the BMC for IPMI
144	  purposes.
145
146	  This support is also available as a module. The module will be
147	  called kcs_bmc_cdev_ipmi.
148
149config IPMI_KCS_BMC_SERIO
150	depends on IPMI_KCS_BMC && SERIO
151	tristate "SerIO adaptor for BMC KCS devices"
152	help
153	  Adapts the BMC KCS device for the SerIO subsystem. This allows users
154	  to take advantage of userspace interfaces provided by SerIO where
155	  appropriate.
156
157	  Say YES if you wish to expose KCS devices on the BMC via SerIO
158	  interfaces.
159
160	  This support is also available as a module. The module will be
161	  called kcs_bmc_serio.
162
163config ASPEED_BT_IPMI_BMC
164	depends on ARCH_ASPEED || COMPILE_TEST
165	depends on REGMAP && REGMAP_MMIO && MFD_SYSCON
166	tristate "BT IPMI bmc driver"
167	help
168	  Provides a driver for the BT (Block Transfer) IPMI interface
169	  found on Aspeed SOCs (AST2400 and AST2500). The driver
170	  implements the BMC side of the BT interface.
171
172config IPMB_DEVICE_INTERFACE
173	tristate 'IPMB Interface handler'
174	depends on I2C
175	depends on I2C_SLAVE
176	help
177	  Provides a driver for a device (Satellite MC) to
178	  receive requests and send responses back to the BMC via
179	  the IPMB interface. This module requires I2C support.
180