1 /* Derived from Applicom driver ac.c for SCO Unix */ 2 /* Ported by David Woodhouse, Axiom (Cambridge) Ltd. */ 3 /* dwmw2@infradead.org 30/8/98 */ 4 /* $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ */ 5 /* This module is for Linux 2.1 and 2.2 series kernels. */ 6 /*****************************************************************************/ 7 /* J PAGET 18/02/94 passage V2.4.2 ioctl avec code 2 reset to les interrupt */ 8 /* ceci pour reseter correctement apres une sortie sauvage */ 9 /* J PAGET 02/05/94 passage V2.4.3 dans le traitement de d'interruption, */ 10 /* LoopCount n'etait pas initialise a 0. */ 11 /* F LAFORSE 04/07/95 version V2.6.0 lecture bidon apres acces a une carte */ 12 /* pour liberer le bus */ 13 /* J.PAGET 19/11/95 version V2.6.1 Nombre, addresse,irq n'est plus configure */ 14 /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter */ 15 /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3 */ 16 /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes */ 17 /* addresses de base des cartes, IOCTL 6 plus complet */ 18 /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification */ 19 /* de code autre que le texte V2.6.1 en V2.8.0 */ 20 /*****************************************************************************/ 21 22 23 #include <linux/kernel.h> 24 #include <linux/module.h> 25 #include <linux/interrupt.h> 26 #include <linux/sched.h> 27 #include <linux/slab.h> 28 #include <linux/errno.h> 29 #include <linux/mutex.h> 30 #include <linux/miscdevice.h> 31 #include <linux/pci.h> 32 #include <linux/wait.h> 33 #include <linux/init.h> 34 #include <linux/fs.h> 35 36 #include <asm/io.h> 37 #include <asm/uaccess.h> 38 39 #include "applicom.h" 40 41 42 /* NOTE: We use for loops with {write,read}b() instead of 43 memcpy_{from,to}io throughout this driver. This is because 44 the board doesn't correctly handle word accesses - only 45 bytes. 46 */ 47 48 49 #undef DEBUG 50 51 #define MAX_BOARD 8 /* maximum of pc board possible */ 52 #define MAX_ISA_BOARD 4 53 #define LEN_RAM_IO 0x800 54 #define AC_MINOR 157 55 56 #ifndef PCI_VENDOR_ID_APPLICOM 57 #define PCI_VENDOR_ID_APPLICOM 0x1389 58 #define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001 59 #define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002 60 #define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003 61 #endif 62 63 static DEFINE_MUTEX(ac_mutex); 64 static char *applicom_pci_devnames[] = { 65 "PCI board", 66 "PCI2000IBS / PCI2000CAN", 67 "PCI2000PFB" 68 }; 69 70 static struct pci_device_id applicom_pci_tbl[] = { 71 { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) }, 72 { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) }, 73 { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) }, 74 { 0 } 75 }; 76 MODULE_DEVICE_TABLE(pci, applicom_pci_tbl); 77 78 MODULE_AUTHOR("David Woodhouse & Applicom International"); 79 MODULE_DESCRIPTION("Driver for Applicom Profibus card"); 80 MODULE_LICENSE("GPL"); 81 MODULE_ALIAS_MISCDEV(AC_MINOR); 82 83 MODULE_SUPPORTED_DEVICE("ac"); 84 85 86 static struct applicom_board { 87 unsigned long PhysIO; 88 void __iomem *RamIO; 89 wait_queue_head_t FlagSleepSend; 90 long irq; 91 spinlock_t mutex; 92 } apbs[MAX_BOARD]; 93 94 static unsigned int irq = 0; /* interrupt number IRQ */ 95 static unsigned long mem = 0; /* physical segment of board */ 96 97 module_param(irq, uint, 0); 98 MODULE_PARM_DESC(irq, "IRQ of the Applicom board"); 99 module_param(mem, ulong, 0); 100 MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board"); 101 102 static unsigned int numboards; /* number of installed boards */ 103 static volatile unsigned char Dummy; 104 static DECLARE_WAIT_QUEUE_HEAD(FlagSleepRec); 105 static unsigned int WriteErrorCount; /* number of write error */ 106 static unsigned int ReadErrorCount; /* number of read error */ 107 static unsigned int DeviceErrorCount; /* number of device error */ 108 109 static ssize_t ac_read (struct file *, char __user *, size_t, loff_t *); 110 static ssize_t ac_write (struct file *, const char __user *, size_t, loff_t *); 111 static long ac_ioctl(struct file *, unsigned int, unsigned long); 112 static irqreturn_t ac_interrupt(int, void *); 113 114 static const struct file_operations ac_fops = { 115 .owner = THIS_MODULE, 116 .llseek = no_llseek, 117 .read = ac_read, 118 .write = ac_write, 119 .unlocked_ioctl = ac_ioctl, 120 }; 121 122 static struct miscdevice ac_miscdev = { 123 AC_MINOR, 124 "ac", 125 &ac_fops 126 }; 127 128 static int dummy; /* dev_id for request_irq() */ 129 130 static int ac_register_board(unsigned long physloc, void __iomem *loc, 131 unsigned char boardno) 132 { 133 volatile unsigned char byte_reset_it; 134 135 if((readb(loc + CONF_END_TEST) != 0x00) || 136 (readb(loc + CONF_END_TEST + 1) != 0x55) || 137 (readb(loc + CONF_END_TEST + 2) != 0xAA) || 138 (readb(loc + CONF_END_TEST + 3) != 0xFF)) 139 return 0; 140 141 if (!boardno) 142 boardno = readb(loc + NUMCARD_OWNER_TO_PC); 143 144 if (!boardno || boardno > MAX_BOARD) { 145 printk(KERN_WARNING "Board #%d (at 0x%lx) is out of range (1 <= x <= %d).\n", 146 boardno, physloc, MAX_BOARD); 147 return 0; 148 } 149 150 if (apbs[boardno - 1].RamIO) { 151 printk(KERN_WARNING "Board #%d (at 0x%lx) conflicts with previous board #%d (at 0x%lx)\n", 152 boardno, physloc, boardno, apbs[boardno-1].PhysIO); 153 return 0; 154 } 155 156 boardno--; 157 158 apbs[boardno].PhysIO = physloc; 159 apbs[boardno].RamIO = loc; 160 init_waitqueue_head(&apbs[boardno].FlagSleepSend); 161 spin_lock_init(&apbs[boardno].mutex); 162 byte_reset_it = readb(loc + RAM_IT_TO_PC); 163 164 numboards++; 165 return boardno + 1; 166 } 167 168 static void __exit applicom_exit(void) 169 { 170 unsigned int i; 171 172 misc_deregister(&ac_miscdev); 173 174 for (i = 0; i < MAX_BOARD; i++) { 175 176 if (!apbs[i].RamIO) 177 continue; 178 179 if (apbs[i].irq) 180 free_irq(apbs[i].irq, &dummy); 181 182 iounmap(apbs[i].RamIO); 183 } 184 } 185 186 static int __init applicom_init(void) 187 { 188 int i, numisa = 0; 189 struct pci_dev *dev = NULL; 190 void __iomem *RamIO; 191 int boardno, ret; 192 193 printk(KERN_INFO "Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $\n"); 194 195 /* No mem and irq given - check for a PCI card */ 196 197 while ( (dev = pci_get_class(PCI_CLASS_OTHERS << 16, dev))) { 198 199 if (!pci_match_id(applicom_pci_tbl, dev)) 200 continue; 201 202 if (pci_enable_device(dev)) 203 return -EIO; 204 205 RamIO = ioremap_nocache(pci_resource_start(dev, 0), LEN_RAM_IO); 206 207 if (!RamIO) { 208 printk(KERN_INFO "ac.o: Failed to ioremap PCI memory " 209 "space at 0x%llx\n", 210 (unsigned long long)pci_resource_start(dev, 0)); 211 pci_disable_device(dev); 212 return -EIO; 213 } 214 215 printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n", 216 applicom_pci_devnames[dev->device-1], 217 (unsigned long long)pci_resource_start(dev, 0), 218 dev->irq); 219 220 boardno = ac_register_board(pci_resource_start(dev, 0), 221 RamIO, 0); 222 if (!boardno) { 223 printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n"); 224 iounmap(RamIO); 225 pci_disable_device(dev); 226 continue; 227 } 228 229 if (request_irq(dev->irq, &ac_interrupt, IRQF_SHARED, "Applicom PCI", &dummy)) { 230 printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq); 231 iounmap(RamIO); 232 pci_disable_device(dev); 233 apbs[boardno - 1].RamIO = NULL; 234 continue; 235 } 236 237 /* Enable interrupts. */ 238 239 writeb(0x40, apbs[boardno - 1].RamIO + RAM_IT_FROM_PC); 240 241 apbs[boardno - 1].irq = dev->irq; 242 } 243 244 /* Finished with PCI cards. If none registered, 245 * and there was no mem/irq specified, exit */ 246 247 if (!mem || !irq) { 248 if (numboards) 249 goto fin; 250 else { 251 printk(KERN_INFO "ac.o: No PCI boards found.\n"); 252 printk(KERN_INFO "ac.o: For an ISA board you must supply memory and irq parameters.\n"); 253 return -ENXIO; 254 } 255 } 256 257 /* Now try the specified ISA cards */ 258 259 for (i = 0; i < MAX_ISA_BOARD; i++) { 260 RamIO = ioremap_nocache(mem + (LEN_RAM_IO * i), LEN_RAM_IO); 261 262 if (!RamIO) { 263 printk(KERN_INFO "ac.o: Failed to ioremap the ISA card's memory space (slot #%d)\n", i + 1); 264 continue; 265 } 266 267 if (!(boardno = ac_register_board((unsigned long)mem+ (LEN_RAM_IO*i), 268 RamIO,i+1))) { 269 iounmap(RamIO); 270 continue; 271 } 272 273 printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq); 274 275 if (!numisa) { 276 if (request_irq(irq, &ac_interrupt, IRQF_SHARED, "Applicom ISA", &dummy)) { 277 printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq); 278 iounmap(RamIO); 279 apbs[boardno - 1].RamIO = NULL; 280 } 281 else 282 apbs[boardno - 1].irq = irq; 283 } 284 else 285 apbs[boardno - 1].irq = 0; 286 287 numisa++; 288 } 289 290 if (!numisa) 291 printk(KERN_WARNING "ac.o: No valid ISA Applicom boards found " 292 "at mem 0x%lx\n", mem); 293 294 fin: 295 init_waitqueue_head(&FlagSleepRec); 296 297 WriteErrorCount = 0; 298 ReadErrorCount = 0; 299 DeviceErrorCount = 0; 300 301 if (numboards) { 302 ret = misc_register(&ac_miscdev); 303 if (ret) { 304 printk(KERN_WARNING "ac.o: Unable to register misc device\n"); 305 goto out; 306 } 307 for (i = 0; i < MAX_BOARD; i++) { 308 int serial; 309 char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1]; 310 311 if (!apbs[i].RamIO) 312 continue; 313 314 for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++) 315 boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial); 316 317 boardname[serial] = 0; 318 319 320 printk(KERN_INFO "Applicom board %d: %s, PROM V%d.%d", 321 i+1, boardname, 322 (int)(readb(apbs[i].RamIO + VERS) >> 4), 323 (int)(readb(apbs[i].RamIO + VERS) & 0xF)); 324 325 serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) + 326 (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) + 327 (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) ); 328 329 if (serial != 0) 330 printk(" S/N %d\n", serial); 331 else 332 printk("\n"); 333 } 334 return 0; 335 } 336 337 else 338 return -ENXIO; 339 340 out: 341 for (i = 0; i < MAX_BOARD; i++) { 342 if (!apbs[i].RamIO) 343 continue; 344 if (apbs[i].irq) 345 free_irq(apbs[i].irq, &dummy); 346 iounmap(apbs[i].RamIO); 347 } 348 pci_disable_device(dev); 349 return ret; 350 } 351 352 module_init(applicom_init); 353 module_exit(applicom_exit); 354 355 356 static ssize_t ac_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos) 357 { 358 unsigned int NumCard; /* Board number 1 -> 8 */ 359 unsigned int IndexCard; /* Index board number 0 -> 7 */ 360 unsigned char TicCard; /* Board TIC to send */ 361 unsigned long flags; /* Current priority */ 362 struct st_ram_io st_loc; 363 struct mailbox tmpmailbox; 364 #ifdef DEBUG 365 int c; 366 #endif 367 DECLARE_WAITQUEUE(wait, current); 368 369 if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) { 370 static int warncount = 5; 371 if (warncount) { 372 printk(KERN_INFO "Hmmm. write() of Applicom card, length %zd != expected %zd\n", 373 count, sizeof(struct st_ram_io) + sizeof(struct mailbox)); 374 warncount--; 375 } 376 return -EINVAL; 377 } 378 379 if(copy_from_user(&st_loc, buf, sizeof(struct st_ram_io))) 380 return -EFAULT; 381 382 if(copy_from_user(&tmpmailbox, &buf[sizeof(struct st_ram_io)], 383 sizeof(struct mailbox))) 384 return -EFAULT; 385 386 NumCard = st_loc.num_card; /* board number to send */ 387 TicCard = st_loc.tic_des_from_pc; /* tic number to send */ 388 IndexCard = NumCard - 1; 389 390 if((NumCard < 1) || (NumCard > MAX_BOARD) || !apbs[IndexCard].RamIO) 391 return -EINVAL; 392 393 #ifdef DEBUG 394 printk("Write to applicom card #%d. struct st_ram_io follows:", 395 IndexCard+1); 396 397 for (c = 0; c < sizeof(struct st_ram_io);) { 398 399 printk("\n%5.5X: %2.2X", c, ((unsigned char *) &st_loc)[c]); 400 401 for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) { 402 printk(" %2.2X", ((unsigned char *) &st_loc)[c]); 403 } 404 } 405 406 printk("\nstruct mailbox follows:"); 407 408 for (c = 0; c < sizeof(struct mailbox);) { 409 printk("\n%5.5X: %2.2X", c, ((unsigned char *) &tmpmailbox)[c]); 410 411 for (c++; c % 8 && c < sizeof(struct mailbox); c++) { 412 printk(" %2.2X", ((unsigned char *) &tmpmailbox)[c]); 413 } 414 } 415 416 printk("\n"); 417 #endif 418 419 spin_lock_irqsave(&apbs[IndexCard].mutex, flags); 420 421 /* Test octet ready correct */ 422 if(readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) > 2) { 423 Dummy = readb(apbs[IndexCard].RamIO + VERS); 424 spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags); 425 printk(KERN_WARNING "APPLICOM driver write error board %d, DataFromPcReady = %d\n", 426 IndexCard,(int)readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY)); 427 DeviceErrorCount++; 428 return -EIO; 429 } 430 431 /* Place ourselves on the wait queue */ 432 set_current_state(TASK_INTERRUPTIBLE); 433 add_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait); 434 435 /* Check whether the card is ready for us */ 436 while (readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) != 0) { 437 Dummy = readb(apbs[IndexCard].RamIO + VERS); 438 /* It's busy. Sleep. */ 439 440 spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags); 441 schedule(); 442 if (signal_pending(current)) { 443 remove_wait_queue(&apbs[IndexCard].FlagSleepSend, 444 &wait); 445 return -EINTR; 446 } 447 spin_lock_irqsave(&apbs[IndexCard].mutex, flags); 448 set_current_state(TASK_INTERRUPTIBLE); 449 } 450 451 /* We may not have actually slept */ 452 set_current_state(TASK_RUNNING); 453 remove_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait); 454 455 writeb(1, apbs[IndexCard].RamIO + DATA_FROM_PC_READY); 456 457 /* Which is best - lock down the pages with rawio and then 458 copy directly, or use bounce buffers? For now we do the latter 459 because it works with 2.2 still */ 460 { 461 unsigned char *from = (unsigned char *) &tmpmailbox; 462 void __iomem *to = apbs[IndexCard].RamIO + RAM_FROM_PC; 463 int c; 464 465 for (c = 0; c < sizeof(struct mailbox); c++) 466 writeb(*(from++), to++); 467 } 468 469 writeb(0x20, apbs[IndexCard].RamIO + TIC_OWNER_FROM_PC); 470 writeb(0xff, apbs[IndexCard].RamIO + NUMCARD_OWNER_FROM_PC); 471 writeb(TicCard, apbs[IndexCard].RamIO + TIC_DES_FROM_PC); 472 writeb(NumCard, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC); 473 writeb(2, apbs[IndexCard].RamIO + DATA_FROM_PC_READY); 474 writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC); 475 Dummy = readb(apbs[IndexCard].RamIO + VERS); 476 spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags); 477 return 0; 478 } 479 480 static int do_ac_read(int IndexCard, char __user *buf, 481 struct st_ram_io *st_loc, struct mailbox *mailbox) 482 { 483 void __iomem *from = apbs[IndexCard].RamIO + RAM_TO_PC; 484 unsigned char *to = (unsigned char *)mailbox; 485 #ifdef DEBUG 486 int c; 487 #endif 488 489 st_loc->tic_owner_to_pc = readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC); 490 st_loc->numcard_owner_to_pc = readb(apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC); 491 492 493 { 494 int c; 495 496 for (c = 0; c < sizeof(struct mailbox); c++) 497 *(to++) = readb(from++); 498 } 499 writeb(1, apbs[IndexCard].RamIO + ACK_FROM_PC_READY); 500 writeb(1, apbs[IndexCard].RamIO + TYP_ACK_FROM_PC); 501 writeb(IndexCard+1, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC); 502 writeb(readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC), 503 apbs[IndexCard].RamIO + TIC_ACK_FROM_PC); 504 writeb(2, apbs[IndexCard].RamIO + ACK_FROM_PC_READY); 505 writeb(0, apbs[IndexCard].RamIO + DATA_TO_PC_READY); 506 writeb(2, apbs[IndexCard].RamIO + RAM_IT_FROM_PC); 507 Dummy = readb(apbs[IndexCard].RamIO + VERS); 508 509 #ifdef DEBUG 510 printk("Read from applicom card #%d. struct st_ram_io follows:", NumCard); 511 512 for (c = 0; c < sizeof(struct st_ram_io);) { 513 printk("\n%5.5X: %2.2X", c, ((unsigned char *)st_loc)[c]); 514 515 for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) { 516 printk(" %2.2X", ((unsigned char *)st_loc)[c]); 517 } 518 } 519 520 printk("\nstruct mailbox follows:"); 521 522 for (c = 0; c < sizeof(struct mailbox);) { 523 printk("\n%5.5X: %2.2X", c, ((unsigned char *)mailbox)[c]); 524 525 for (c++; c % 8 && c < sizeof(struct mailbox); c++) { 526 printk(" %2.2X", ((unsigned char *)mailbox)[c]); 527 } 528 } 529 printk("\n"); 530 #endif 531 return (sizeof(struct st_ram_io) + sizeof(struct mailbox)); 532 } 533 534 static ssize_t ac_read (struct file *filp, char __user *buf, size_t count, loff_t *ptr) 535 { 536 unsigned long flags; 537 unsigned int i; 538 unsigned char tmp; 539 int ret = 0; 540 DECLARE_WAITQUEUE(wait, current); 541 #ifdef DEBUG 542 int loopcount=0; 543 #endif 544 /* No need to ratelimit this. Only root can trigger it anyway */ 545 if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) { 546 printk( KERN_WARNING "Hmmm. read() of Applicom card, length %zd != expected %zd\n", 547 count,sizeof(struct st_ram_io) + sizeof(struct mailbox)); 548 return -EINVAL; 549 } 550 551 while(1) { 552 /* Stick ourself on the wait queue */ 553 set_current_state(TASK_INTERRUPTIBLE); 554 add_wait_queue(&FlagSleepRec, &wait); 555 556 /* Scan each board, looking for one which has a packet for us */ 557 for (i=0; i < MAX_BOARD; i++) { 558 if (!apbs[i].RamIO) 559 continue; 560 spin_lock_irqsave(&apbs[i].mutex, flags); 561 562 tmp = readb(apbs[i].RamIO + DATA_TO_PC_READY); 563 564 if (tmp == 2) { 565 struct st_ram_io st_loc; 566 struct mailbox mailbox; 567 568 /* Got a packet for us */ 569 memset(&st_loc, 0, sizeof(st_loc)); 570 ret = do_ac_read(i, buf, &st_loc, &mailbox); 571 spin_unlock_irqrestore(&apbs[i].mutex, flags); 572 set_current_state(TASK_RUNNING); 573 remove_wait_queue(&FlagSleepRec, &wait); 574 575 if (copy_to_user(buf, &st_loc, sizeof(st_loc))) 576 return -EFAULT; 577 if (copy_to_user(buf + sizeof(st_loc), &mailbox, sizeof(mailbox))) 578 return -EFAULT; 579 return tmp; 580 } 581 582 if (tmp > 2) { 583 /* Got an error */ 584 Dummy = readb(apbs[i].RamIO + VERS); 585 586 spin_unlock_irqrestore(&apbs[i].mutex, flags); 587 set_current_state(TASK_RUNNING); 588 remove_wait_queue(&FlagSleepRec, &wait); 589 590 printk(KERN_WARNING "APPLICOM driver read error board %d, DataToPcReady = %d\n", 591 i,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY)); 592 DeviceErrorCount++; 593 return -EIO; 594 } 595 596 /* Nothing for us. Try the next board */ 597 Dummy = readb(apbs[i].RamIO + VERS); 598 spin_unlock_irqrestore(&apbs[i].mutex, flags); 599 600 } /* per board */ 601 602 /* OK - No boards had data for us. Sleep now */ 603 604 schedule(); 605 remove_wait_queue(&FlagSleepRec, &wait); 606 607 if (signal_pending(current)) 608 return -EINTR; 609 610 #ifdef DEBUG 611 if (loopcount++ > 2) { 612 printk(KERN_DEBUG "Looping in ac_read. loopcount %d\n", loopcount); 613 } 614 #endif 615 } 616 } 617 618 static irqreturn_t ac_interrupt(int vec, void *dev_instance) 619 { 620 unsigned int i; 621 unsigned int FlagInt; 622 unsigned int LoopCount; 623 int handled = 0; 624 625 // printk("Applicom interrupt on IRQ %d occurred\n", vec); 626 627 LoopCount = 0; 628 629 do { 630 FlagInt = 0; 631 for (i = 0; i < MAX_BOARD; i++) { 632 633 /* Skip if this board doesn't exist */ 634 if (!apbs[i].RamIO) 635 continue; 636 637 spin_lock(&apbs[i].mutex); 638 639 /* Skip if this board doesn't want attention */ 640 if(readb(apbs[i].RamIO + RAM_IT_TO_PC) == 0) { 641 spin_unlock(&apbs[i].mutex); 642 continue; 643 } 644 645 handled = 1; 646 FlagInt = 1; 647 writeb(0, apbs[i].RamIO + RAM_IT_TO_PC); 648 649 if (readb(apbs[i].RamIO + DATA_TO_PC_READY) > 2) { 650 printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataToPcReady = %d\n", 651 i+1,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY)); 652 DeviceErrorCount++; 653 } 654 655 if((readb(apbs[i].RamIO + DATA_FROM_PC_READY) > 2) && 656 (readb(apbs[i].RamIO + DATA_FROM_PC_READY) != 6)) { 657 658 printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataFromPcReady = %d\n", 659 i+1,(int)readb(apbs[i].RamIO + DATA_FROM_PC_READY)); 660 DeviceErrorCount++; 661 } 662 663 if (readb(apbs[i].RamIO + DATA_TO_PC_READY) == 2) { /* mailbox sent by the card ? */ 664 if (waitqueue_active(&FlagSleepRec)) { 665 wake_up_interruptible(&FlagSleepRec); 666 } 667 } 668 669 if (readb(apbs[i].RamIO + DATA_FROM_PC_READY) == 0) { /* ram i/o free for write by pc ? */ 670 if (waitqueue_active(&apbs[i].FlagSleepSend)) { /* process sleep during read ? */ 671 wake_up_interruptible(&apbs[i].FlagSleepSend); 672 } 673 } 674 Dummy = readb(apbs[i].RamIO + VERS); 675 676 if(readb(apbs[i].RamIO + RAM_IT_TO_PC)) { 677 /* There's another int waiting on this card */ 678 spin_unlock(&apbs[i].mutex); 679 i--; 680 } else { 681 spin_unlock(&apbs[i].mutex); 682 } 683 } 684 if (FlagInt) 685 LoopCount = 0; 686 else 687 LoopCount++; 688 } while(LoopCount < 2); 689 return IRQ_RETVAL(handled); 690 } 691 692 693 694 static long ac_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 695 696 { /* @ ADG ou ATO selon le cas */ 697 int i; 698 unsigned char IndexCard; 699 void __iomem *pmem; 700 int ret = 0; 701 volatile unsigned char byte_reset_it; 702 struct st_ram_io *adgl; 703 void __user *argp = (void __user *)arg; 704 705 /* In general, the device is only openable by root anyway, so we're not 706 particularly concerned that bogus ioctls can flood the console. */ 707 708 adgl = memdup_user(argp, sizeof(struct st_ram_io)); 709 if (IS_ERR(adgl)) 710 return PTR_ERR(adgl); 711 712 mutex_lock(&ac_mutex); 713 IndexCard = adgl->num_card-1; 714 715 if(cmd != 6 && ((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) { 716 static int warncount = 10; 717 if (warncount) { 718 printk( KERN_WARNING "APPLICOM driver IOCTL, bad board number %d\n",(int)IndexCard+1); 719 warncount--; 720 } 721 kfree(adgl); 722 mutex_unlock(&ac_mutex); 723 return -EINVAL; 724 } 725 726 switch (cmd) { 727 728 case 0: 729 pmem = apbs[IndexCard].RamIO; 730 for (i = 0; i < sizeof(struct st_ram_io); i++) 731 ((unsigned char *)adgl)[i]=readb(pmem++); 732 if (copy_to_user(argp, adgl, sizeof(struct st_ram_io))) 733 ret = -EFAULT; 734 break; 735 case 1: 736 pmem = apbs[IndexCard].RamIO + CONF_END_TEST; 737 for (i = 0; i < 4; i++) 738 adgl->conf_end_test[i] = readb(pmem++); 739 for (i = 0; i < 2; i++) 740 adgl->error_code[i] = readb(pmem++); 741 for (i = 0; i < 4; i++) 742 adgl->parameter_error[i] = readb(pmem++); 743 pmem = apbs[IndexCard].RamIO + VERS; 744 adgl->vers = readb(pmem); 745 pmem = apbs[IndexCard].RamIO + TYPE_CARD; 746 for (i = 0; i < 20; i++) 747 adgl->reserv1[i] = readb(pmem++); 748 *(int *)&adgl->reserv1[20] = 749 (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER) << 16) + 750 (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 1) << 8) + 751 (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 2) ); 752 753 if (copy_to_user(argp, adgl, sizeof(struct st_ram_io))) 754 ret = -EFAULT; 755 break; 756 case 2: 757 pmem = apbs[IndexCard].RamIO + CONF_END_TEST; 758 for (i = 0; i < 10; i++) 759 writeb(0xff, pmem++); 760 writeb(adgl->data_from_pc_ready, 761 apbs[IndexCard].RamIO + DATA_FROM_PC_READY); 762 763 writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC); 764 765 for (i = 0; i < MAX_BOARD; i++) { 766 if (apbs[i].RamIO) { 767 byte_reset_it = readb(apbs[i].RamIO + RAM_IT_TO_PC); 768 } 769 } 770 break; 771 case 3: 772 pmem = apbs[IndexCard].RamIO + TIC_DES_FROM_PC; 773 writeb(adgl->tic_des_from_pc, pmem); 774 break; 775 case 4: 776 pmem = apbs[IndexCard].RamIO + TIC_OWNER_TO_PC; 777 adgl->tic_owner_to_pc = readb(pmem++); 778 adgl->numcard_owner_to_pc = readb(pmem); 779 if (copy_to_user(argp, adgl,sizeof(struct st_ram_io))) 780 ret = -EFAULT; 781 break; 782 case 5: 783 writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC); 784 writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC); 785 writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC); 786 writeb(4, apbs[IndexCard].RamIO + DATA_FROM_PC_READY); 787 writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC); 788 break; 789 case 6: 790 printk(KERN_INFO "APPLICOM driver release .... V2.8.0 ($Revision: 1.30 $)\n"); 791 printk(KERN_INFO "Number of installed boards . %d\n", (int) numboards); 792 printk(KERN_INFO "Segment of board ........... %X\n", (int) mem); 793 printk(KERN_INFO "Interrupt IRQ number ....... %d\n", (int) irq); 794 for (i = 0; i < MAX_BOARD; i++) { 795 int serial; 796 char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1]; 797 798 if (!apbs[i].RamIO) 799 continue; 800 801 for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++) 802 boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial); 803 boardname[serial] = 0; 804 805 printk(KERN_INFO "Prom version board %d ....... V%d.%d %s", 806 i+1, 807 (int)(readb(apbs[i].RamIO + VERS) >> 4), 808 (int)(readb(apbs[i].RamIO + VERS) & 0xF), 809 boardname); 810 811 812 serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) + 813 (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) + 814 (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) ); 815 816 if (serial != 0) 817 printk(" S/N %d\n", serial); 818 else 819 printk("\n"); 820 } 821 if (DeviceErrorCount != 0) 822 printk(KERN_INFO "DeviceErrorCount ........... %d\n", DeviceErrorCount); 823 if (ReadErrorCount != 0) 824 printk(KERN_INFO "ReadErrorCount ............. %d\n", ReadErrorCount); 825 if (WriteErrorCount != 0) 826 printk(KERN_INFO "WriteErrorCount ............ %d\n", WriteErrorCount); 827 if (waitqueue_active(&FlagSleepRec)) 828 printk(KERN_INFO "Process in read pending\n"); 829 for (i = 0; i < MAX_BOARD; i++) { 830 if (apbs[i].RamIO && waitqueue_active(&apbs[i].FlagSleepSend)) 831 printk(KERN_INFO "Process in write pending board %d\n",i+1); 832 } 833 break; 834 default: 835 ret = -ENOTTY; 836 break; 837 } 838 Dummy = readb(apbs[IndexCard].RamIO + VERS); 839 kfree(adgl); 840 mutex_unlock(&ac_mutex); 841 return 0; 842 } 843 844