xref: /openbmc/linux/drivers/char/agp/via-agp.c (revision cc8bbe1a)
1 /*
2  * VIA AGPGART routines.
3  */
4 
5 #include <linux/types.h>
6 #include <linux/module.h>
7 #include <linux/pci.h>
8 #include <linux/init.h>
9 #include <linux/agp_backend.h>
10 #include "agp.h"
11 
12 static const struct pci_device_id agp_via_pci_table[];
13 
14 #define VIA_GARTCTRL	0x80
15 #define VIA_APSIZE	0x84
16 #define VIA_ATTBASE	0x88
17 
18 #define VIA_AGP3_GARTCTRL	0x90
19 #define VIA_AGP3_APSIZE		0x94
20 #define VIA_AGP3_ATTBASE	0x98
21 #define VIA_AGPSEL		0xfd
22 
23 static int via_fetch_size(void)
24 {
25 	int i;
26 	u8 temp;
27 	struct aper_size_info_8 *values;
28 
29 	values = A_SIZE_8(agp_bridge->driver->aperture_sizes);
30 	pci_read_config_byte(agp_bridge->dev, VIA_APSIZE, &temp);
31 	for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
32 		if (temp == values[i].size_value) {
33 			agp_bridge->previous_size =
34 			    agp_bridge->current_size = (void *) (values + i);
35 			agp_bridge->aperture_size_idx = i;
36 			return values[i].size;
37 		}
38 	}
39 	printk(KERN_ERR PFX "Unknown aperture size from AGP bridge (0x%x)\n", temp);
40 	return 0;
41 }
42 
43 
44 static int via_configure(void)
45 {
46 	struct aper_size_info_8 *current_size;
47 
48 	current_size = A_SIZE_8(agp_bridge->current_size);
49 	/* aperture size */
50 	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
51 			      current_size->size_value);
52 	/* address to map to */
53 	agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
54 						    AGP_APERTURE_BAR);
55 
56 	/* GART control register */
57 	pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, 0x0000000f);
58 
59 	/* attbase - aperture GATT base */
60 	pci_write_config_dword(agp_bridge->dev, VIA_ATTBASE,
61 			    (agp_bridge->gatt_bus_addr & 0xfffff000) | 3);
62 	return 0;
63 }
64 
65 
66 static void via_cleanup(void)
67 {
68 	struct aper_size_info_8 *previous_size;
69 
70 	previous_size = A_SIZE_8(agp_bridge->previous_size);
71 	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
72 			      previous_size->size_value);
73 	/* Do not disable by writing 0 to VIA_ATTBASE, it screws things up
74 	 * during reinitialization.
75 	 */
76 }
77 
78 
79 static void via_tlbflush(struct agp_memory *mem)
80 {
81 	u32 temp;
82 
83 	pci_read_config_dword(agp_bridge->dev, VIA_GARTCTRL, &temp);
84 	temp |= (1<<7);
85 	pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, temp);
86 	temp &= ~(1<<7);
87 	pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, temp);
88 }
89 
90 
91 static const struct aper_size_info_8 via_generic_sizes[9] =
92 {
93 	{256, 65536, 6, 0},
94 	{128, 32768, 5, 128},
95 	{64, 16384, 4, 192},
96 	{32, 8192, 3, 224},
97 	{16, 4096, 2, 240},
98 	{8, 2048, 1, 248},
99 	{4, 1024, 0, 252},
100 	{2, 512, 0, 254},
101 	{1, 256, 0, 255}
102 };
103 
104 
105 static int via_fetch_size_agp3(void)
106 {
107 	int i;
108 	u16 temp;
109 	struct aper_size_info_16 *values;
110 
111 	values = A_SIZE_16(agp_bridge->driver->aperture_sizes);
112 	pci_read_config_word(agp_bridge->dev, VIA_AGP3_APSIZE, &temp);
113 	temp &= 0xfff;
114 
115 	for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
116 		if (temp == values[i].size_value) {
117 			agp_bridge->previous_size =
118 				agp_bridge->current_size = (void *) (values + i);
119 			agp_bridge->aperture_size_idx = i;
120 			return values[i].size;
121 		}
122 	}
123 	return 0;
124 }
125 
126 
127 static int via_configure_agp3(void)
128 {
129 	u32 temp;
130 	struct aper_size_info_16 *current_size;
131 
132 	current_size = A_SIZE_16(agp_bridge->current_size);
133 
134 	/* address to map to */
135 	agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
136 						    AGP_APERTURE_BAR);
137 
138 	/* attbase - aperture GATT base */
139 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_ATTBASE,
140 		agp_bridge->gatt_bus_addr & 0xfffff000);
141 
142 	/* 1. Enable GTLB in RX90<7>, all AGP aperture access needs to fetch
143 	 *    translation table first.
144 	 * 2. Enable AGP aperture in RX91<0>. This bit controls the enabling of the
145 	 *    graphics AGP aperture for the AGP3.0 port.
146 	 */
147 	pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp);
148 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp | (3<<7));
149 	return 0;
150 }
151 
152 
153 static void via_cleanup_agp3(void)
154 {
155 	struct aper_size_info_16 *previous_size;
156 
157 	previous_size = A_SIZE_16(agp_bridge->previous_size);
158 	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE, previous_size->size_value);
159 }
160 
161 
162 static void via_tlbflush_agp3(struct agp_memory *mem)
163 {
164 	u32 temp;
165 
166 	pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp);
167 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp & ~(1<<7));
168 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp);
169 }
170 
171 
172 static const struct agp_bridge_driver via_agp3_driver = {
173 	.owner			= THIS_MODULE,
174 	.aperture_sizes		= agp3_generic_sizes,
175 	.size_type		= U8_APER_SIZE,
176 	.num_aperture_sizes	= 10,
177 	.needs_scratch_page	= true,
178 	.configure		= via_configure_agp3,
179 	.fetch_size		= via_fetch_size_agp3,
180 	.cleanup		= via_cleanup_agp3,
181 	.tlb_flush		= via_tlbflush_agp3,
182 	.mask_memory		= agp_generic_mask_memory,
183 	.masks			= NULL,
184 	.agp_enable		= agp_generic_enable,
185 	.cache_flush		= global_cache_flush,
186 	.create_gatt_table	= agp_generic_create_gatt_table,
187 	.free_gatt_table	= agp_generic_free_gatt_table,
188 	.insert_memory		= agp_generic_insert_memory,
189 	.remove_memory		= agp_generic_remove_memory,
190 	.alloc_by_type		= agp_generic_alloc_by_type,
191 	.free_by_type		= agp_generic_free_by_type,
192 	.agp_alloc_page		= agp_generic_alloc_page,
193 	.agp_alloc_pages	= agp_generic_alloc_pages,
194 	.agp_destroy_page	= agp_generic_destroy_page,
195 	.agp_destroy_pages	= agp_generic_destroy_pages,
196 	.agp_type_to_mask_type  = agp_generic_type_to_mask_type,
197 };
198 
199 static const struct agp_bridge_driver via_driver = {
200 	.owner			= THIS_MODULE,
201 	.aperture_sizes		= via_generic_sizes,
202 	.size_type		= U8_APER_SIZE,
203 	.num_aperture_sizes	= 9,
204 	.needs_scratch_page	= true,
205 	.configure		= via_configure,
206 	.fetch_size		= via_fetch_size,
207 	.cleanup		= via_cleanup,
208 	.tlb_flush		= via_tlbflush,
209 	.mask_memory		= agp_generic_mask_memory,
210 	.masks			= NULL,
211 	.agp_enable		= agp_generic_enable,
212 	.cache_flush		= global_cache_flush,
213 	.create_gatt_table	= agp_generic_create_gatt_table,
214 	.free_gatt_table	= agp_generic_free_gatt_table,
215 	.insert_memory		= agp_generic_insert_memory,
216 	.remove_memory		= agp_generic_remove_memory,
217 	.alloc_by_type		= agp_generic_alloc_by_type,
218 	.free_by_type		= agp_generic_free_by_type,
219 	.agp_alloc_page		= agp_generic_alloc_page,
220 	.agp_alloc_pages	= agp_generic_alloc_pages,
221 	.agp_destroy_page	= agp_generic_destroy_page,
222 	.agp_destroy_pages	= agp_generic_destroy_pages,
223 	.agp_type_to_mask_type  = agp_generic_type_to_mask_type,
224 };
225 
226 static struct agp_device_ids via_agp_device_ids[] =
227 {
228 	{
229 		.device_id	= PCI_DEVICE_ID_VIA_82C597_0,
230 		.chipset_name	= "Apollo VP3",
231 	},
232 
233 	{
234 		.device_id	= PCI_DEVICE_ID_VIA_82C598_0,
235 		.chipset_name	= "Apollo MVP3",
236 	},
237 
238 	{
239 		.device_id	= PCI_DEVICE_ID_VIA_8501_0,
240 		.chipset_name	= "Apollo MVP4",
241 	},
242 
243 	/* VT8601 */
244 	{
245 		.device_id	= PCI_DEVICE_ID_VIA_8601_0,
246 		.chipset_name	= "Apollo ProMedia/PLE133Ta",
247 	},
248 
249 	/* VT82C693A / VT28C694T */
250 	{
251 		.device_id	= PCI_DEVICE_ID_VIA_82C691_0,
252 		.chipset_name	= "Apollo Pro 133",
253 	},
254 
255 	{
256 		.device_id	= PCI_DEVICE_ID_VIA_8371_0,
257 		.chipset_name	= "KX133",
258 	},
259 
260 	/* VT8633 */
261 	{
262 		.device_id	= PCI_DEVICE_ID_VIA_8633_0,
263 		.chipset_name	= "Pro 266",
264 	},
265 
266 	{
267 		.device_id	= PCI_DEVICE_ID_VIA_XN266,
268 		.chipset_name	= "Apollo Pro266",
269 	},
270 
271 	/* VT8361 */
272 	{
273 		.device_id	= PCI_DEVICE_ID_VIA_8361,
274 		.chipset_name	= "KLE133",
275 	},
276 
277 	/* VT8365 / VT8362 */
278 	{
279 		.device_id	= PCI_DEVICE_ID_VIA_8363_0,
280 		.chipset_name	= "Twister-K/KT133x/KM133",
281 	},
282 
283 	/* VT8753A */
284 	{
285 		.device_id	= PCI_DEVICE_ID_VIA_8753_0,
286 		.chipset_name	= "P4X266",
287 	},
288 
289 	/* VT8366 */
290 	{
291 		.device_id	= PCI_DEVICE_ID_VIA_8367_0,
292 		.chipset_name	= "KT266/KY266x/KT333",
293 	},
294 
295 	/* VT8633 (for CuMine/ Celeron) */
296 	{
297 		.device_id	= PCI_DEVICE_ID_VIA_8653_0,
298 		.chipset_name	= "Pro266T",
299 	},
300 
301 	/* KM266 / PM266 */
302 	{
303 		.device_id	= PCI_DEVICE_ID_VIA_XM266,
304 		.chipset_name	= "PM266/KM266",
305 	},
306 
307 	/* CLE266 */
308 	{
309 		.device_id	= PCI_DEVICE_ID_VIA_862X_0,
310 		.chipset_name	= "CLE266",
311 	},
312 
313 	{
314 		.device_id	= PCI_DEVICE_ID_VIA_8377_0,
315 		.chipset_name	= "KT400/KT400A/KT600",
316 	},
317 
318 	/* VT8604 / VT8605 / VT8603
319 	 * (Apollo Pro133A chipset with S3 Savage4) */
320 	{
321 		.device_id	= PCI_DEVICE_ID_VIA_8605_0,
322 		.chipset_name	= "ProSavage PM133/PL133/PN133"
323 	},
324 
325 	/* P4M266x/P4N266 */
326 	{
327 		.device_id	= PCI_DEVICE_ID_VIA_8703_51_0,
328 		.chipset_name	= "P4M266x/P4N266",
329 	},
330 
331 	/* VT8754 */
332 	{
333 		.device_id	= PCI_DEVICE_ID_VIA_8754C_0,
334 		.chipset_name	= "PT800",
335 	},
336 
337 	/* P4X600 */
338 	{
339 		.device_id	= PCI_DEVICE_ID_VIA_8763_0,
340 		.chipset_name	= "P4X600"
341 	},
342 
343 	/* KM400 */
344 	{
345 		.device_id	= PCI_DEVICE_ID_VIA_8378_0,
346 		.chipset_name	= "KM400/KM400A",
347 	},
348 
349 	/* PT880 */
350 	{
351 		.device_id	= PCI_DEVICE_ID_VIA_PT880,
352 		.chipset_name	= "PT880",
353 	},
354 
355 	/* PT880 Ultra */
356 	{
357 		.device_id	= PCI_DEVICE_ID_VIA_PT880ULTRA,
358 		.chipset_name	= "PT880 Ultra",
359 	},
360 
361 	/* PT890 */
362 	{
363 		.device_id	= PCI_DEVICE_ID_VIA_8783_0,
364 		.chipset_name	= "PT890",
365 	},
366 
367 	/* PM800/PN800/PM880/PN880 */
368 	{
369 		.device_id	= PCI_DEVICE_ID_VIA_PX8X0_0,
370 		.chipset_name	= "PM800/PN800/PM880/PN880",
371 	},
372 	/* KT880 */
373 	{
374 		.device_id	= PCI_DEVICE_ID_VIA_3269_0,
375 		.chipset_name	= "KT880",
376 	},
377 	/* KTxxx/Px8xx */
378 	{
379 		.device_id	= PCI_DEVICE_ID_VIA_83_87XX_1,
380 		.chipset_name	= "VT83xx/VT87xx/KTxxx/Px8xx",
381 	},
382 	/* P4M800 */
383 	{
384 		.device_id	= PCI_DEVICE_ID_VIA_3296_0,
385 		.chipset_name	= "P4M800",
386 	},
387 	/* P4M800CE */
388 	{
389 		.device_id	= PCI_DEVICE_ID_VIA_P4M800CE,
390 		.chipset_name	= "VT3314",
391 	},
392 	/* VT3324 / CX700 */
393 	{
394 		.device_id  = PCI_DEVICE_ID_VIA_VT3324,
395 		.chipset_name   = "CX700",
396 	},
397 	/* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique
398 	 * architecture, the AGP resource and behavior are different from
399 	 * the traditional AGP which resides only in chipset. AGP is used
400 	 * by 3D driver which wasn't available for the VT3336 and VT3364
401 	 * generation until now.  Unfortunately, by testing, VT3364 works
402 	 * but VT3336 doesn't. - explanation from via, just leave this as
403 	 * as a placeholder to avoid future patches adding it back in.
404 	 */
405 #if 0
406 	{
407 		.device_id  = PCI_DEVICE_ID_VIA_VT3336,
408 		.chipset_name   = "VT3336",
409 	},
410 #endif
411 	/* P4M890 */
412 	{
413 		.device_id  = PCI_DEVICE_ID_VIA_P4M890,
414 		.chipset_name   = "P4M890",
415 	},
416 	/* P4M900 */
417 	{
418 		.device_id  = PCI_DEVICE_ID_VIA_VT3364,
419 		.chipset_name   = "P4M900",
420 	},
421 	{ }, /* dummy final entry, always present */
422 };
423 
424 
425 /*
426  * VIA's AGP3 chipsets do magick to put the AGP bridge compliant
427  * with the same standards version as the graphics card.
428  */
429 static void check_via_agp3 (struct agp_bridge_data *bridge)
430 {
431 	u8 reg;
432 
433 	pci_read_config_byte(bridge->dev, VIA_AGPSEL, &reg);
434 	/* Check AGP 2.0 compatibility mode. */
435 	if ((reg & (1<<1))==0)
436 		bridge->driver = &via_agp3_driver;
437 }
438 
439 
440 static int agp_via_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
441 {
442 	struct agp_device_ids *devs = via_agp_device_ids;
443 	struct agp_bridge_data *bridge;
444 	int j = 0;
445 	u8 cap_ptr;
446 
447 	cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
448 	if (!cap_ptr)
449 		return -ENODEV;
450 
451 	j = ent - agp_via_pci_table;
452 	printk (KERN_INFO PFX "Detected VIA %s chipset\n", devs[j].chipset_name);
453 
454 	bridge = agp_alloc_bridge();
455 	if (!bridge)
456 		return -ENOMEM;
457 
458 	bridge->dev = pdev;
459 	bridge->capndx = cap_ptr;
460 	bridge->driver = &via_driver;
461 
462 	/*
463 	 * Garg, there are KT400s with KT266 IDs.
464 	 */
465 	if (pdev->device == PCI_DEVICE_ID_VIA_8367_0) {
466 		/* Is there a KT400 subsystem ? */
467 		if (pdev->subsystem_device == PCI_DEVICE_ID_VIA_8377_0) {
468 			printk(KERN_INFO PFX "Found KT400 in disguise as a KT266.\n");
469 			check_via_agp3(bridge);
470 		}
471 	}
472 
473 	/* If this is an AGP3 bridge, check which mode its in and adjust. */
474 	get_agp_version(bridge);
475 	if (bridge->major_version >= 3)
476 		check_via_agp3(bridge);
477 
478 	/* Fill in the mode register */
479 	pci_read_config_dword(pdev,
480 			bridge->capndx+PCI_AGP_STATUS, &bridge->mode);
481 
482 	pci_set_drvdata(pdev, bridge);
483 	return agp_add_bridge(bridge);
484 }
485 
486 static void agp_via_remove(struct pci_dev *pdev)
487 {
488 	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
489 
490 	agp_remove_bridge(bridge);
491 	agp_put_bridge(bridge);
492 }
493 
494 #ifdef CONFIG_PM
495 
496 static int agp_via_suspend(struct pci_dev *pdev, pm_message_t state)
497 {
498 	pci_save_state (pdev);
499 	pci_set_power_state (pdev, PCI_D3hot);
500 
501 	return 0;
502 }
503 
504 static int agp_via_resume(struct pci_dev *pdev)
505 {
506 	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
507 
508 	pci_set_power_state (pdev, PCI_D0);
509 	pci_restore_state(pdev);
510 
511 	if (bridge->driver == &via_agp3_driver)
512 		return via_configure_agp3();
513 	else if (bridge->driver == &via_driver)
514 		return via_configure();
515 
516 	return 0;
517 }
518 
519 #endif /* CONFIG_PM */
520 
521 /* must be the same order as name table above */
522 static const struct pci_device_id agp_via_pci_table[] = {
523 #define ID(x) \
524 	{						\
525 	.class		= (PCI_CLASS_BRIDGE_HOST << 8),	\
526 	.class_mask	= ~0,				\
527 	.vendor		= PCI_VENDOR_ID_VIA,		\
528 	.device		= x,				\
529 	.subvendor	= PCI_ANY_ID,			\
530 	.subdevice	= PCI_ANY_ID,			\
531 	}
532 	ID(PCI_DEVICE_ID_VIA_82C597_0),
533 	ID(PCI_DEVICE_ID_VIA_82C598_0),
534 	ID(PCI_DEVICE_ID_VIA_8501_0),
535 	ID(PCI_DEVICE_ID_VIA_8601_0),
536 	ID(PCI_DEVICE_ID_VIA_82C691_0),
537 	ID(PCI_DEVICE_ID_VIA_8371_0),
538 	ID(PCI_DEVICE_ID_VIA_8633_0),
539 	ID(PCI_DEVICE_ID_VIA_XN266),
540 	ID(PCI_DEVICE_ID_VIA_8361),
541 	ID(PCI_DEVICE_ID_VIA_8363_0),
542 	ID(PCI_DEVICE_ID_VIA_8753_0),
543 	ID(PCI_DEVICE_ID_VIA_8367_0),
544 	ID(PCI_DEVICE_ID_VIA_8653_0),
545 	ID(PCI_DEVICE_ID_VIA_XM266),
546 	ID(PCI_DEVICE_ID_VIA_862X_0),
547 	ID(PCI_DEVICE_ID_VIA_8377_0),
548 	ID(PCI_DEVICE_ID_VIA_8605_0),
549 	ID(PCI_DEVICE_ID_VIA_8703_51_0),
550 	ID(PCI_DEVICE_ID_VIA_8754C_0),
551 	ID(PCI_DEVICE_ID_VIA_8763_0),
552 	ID(PCI_DEVICE_ID_VIA_8378_0),
553 	ID(PCI_DEVICE_ID_VIA_PT880),
554 	ID(PCI_DEVICE_ID_VIA_PT880ULTRA),
555 	ID(PCI_DEVICE_ID_VIA_8783_0),
556 	ID(PCI_DEVICE_ID_VIA_PX8X0_0),
557 	ID(PCI_DEVICE_ID_VIA_3269_0),
558 	ID(PCI_DEVICE_ID_VIA_83_87XX_1),
559 	ID(PCI_DEVICE_ID_VIA_3296_0),
560 	ID(PCI_DEVICE_ID_VIA_P4M800CE),
561 	ID(PCI_DEVICE_ID_VIA_VT3324),
562 	ID(PCI_DEVICE_ID_VIA_P4M890),
563 	ID(PCI_DEVICE_ID_VIA_VT3364),
564 	{ }
565 };
566 
567 MODULE_DEVICE_TABLE(pci, agp_via_pci_table);
568 
569 
570 static struct pci_driver agp_via_pci_driver = {
571 	.name		= "agpgart-via",
572 	.id_table	= agp_via_pci_table,
573 	.probe		= agp_via_probe,
574 	.remove		= agp_via_remove,
575 #ifdef CONFIG_PM
576 	.suspend	= agp_via_suspend,
577 	.resume		= agp_via_resume,
578 #endif
579 };
580 
581 
582 static int __init agp_via_init(void)
583 {
584 	if (agp_off)
585 		return -EINVAL;
586 	return pci_register_driver(&agp_via_pci_driver);
587 }
588 
589 static void __exit agp_via_cleanup(void)
590 {
591 	pci_unregister_driver(&agp_via_pci_driver);
592 }
593 
594 module_init(agp_via_init);
595 module_exit(agp_via_cleanup);
596 
597 MODULE_LICENSE("GPL");
598 MODULE_AUTHOR("Dave Jones");
599