xref: /openbmc/linux/drivers/char/agp/via-agp.c (revision 9a29f5fc)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * VIA AGPGART routines.
4  */
5 
6 #include <linux/types.h>
7 #include <linux/module.h>
8 #include <linux/pci.h>
9 #include <linux/init.h>
10 #include <linux/agp_backend.h>
11 #include "agp.h"
12 
13 static const struct pci_device_id agp_via_pci_table[];
14 
15 #define VIA_GARTCTRL	0x80
16 #define VIA_APSIZE	0x84
17 #define VIA_ATTBASE	0x88
18 
19 #define VIA_AGP3_GARTCTRL	0x90
20 #define VIA_AGP3_APSIZE		0x94
21 #define VIA_AGP3_ATTBASE	0x98
22 #define VIA_AGPSEL		0xfd
23 
24 static int via_fetch_size(void)
25 {
26 	int i;
27 	u8 temp;
28 	struct aper_size_info_8 *values;
29 
30 	values = A_SIZE_8(agp_bridge->driver->aperture_sizes);
31 	pci_read_config_byte(agp_bridge->dev, VIA_APSIZE, &temp);
32 	for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
33 		if (temp == values[i].size_value) {
34 			agp_bridge->previous_size =
35 			    agp_bridge->current_size = (void *) (values + i);
36 			agp_bridge->aperture_size_idx = i;
37 			return values[i].size;
38 		}
39 	}
40 	printk(KERN_ERR PFX "Unknown aperture size from AGP bridge (0x%x)\n", temp);
41 	return 0;
42 }
43 
44 
45 static int via_configure(void)
46 {
47 	struct aper_size_info_8 *current_size;
48 
49 	current_size = A_SIZE_8(agp_bridge->current_size);
50 	/* aperture size */
51 	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
52 			      current_size->size_value);
53 	/* address to map to */
54 	agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
55 						    AGP_APERTURE_BAR);
56 
57 	/* GART control register */
58 	pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, 0x0000000f);
59 
60 	/* attbase - aperture GATT base */
61 	pci_write_config_dword(agp_bridge->dev, VIA_ATTBASE,
62 			    (agp_bridge->gatt_bus_addr & 0xfffff000) | 3);
63 	return 0;
64 }
65 
66 
67 static void via_cleanup(void)
68 {
69 	struct aper_size_info_8 *previous_size;
70 
71 	previous_size = A_SIZE_8(agp_bridge->previous_size);
72 	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
73 			      previous_size->size_value);
74 	/* Do not disable by writing 0 to VIA_ATTBASE, it screws things up
75 	 * during reinitialization.
76 	 */
77 }
78 
79 
80 static void via_tlbflush(struct agp_memory *mem)
81 {
82 	u32 temp;
83 
84 	pci_read_config_dword(agp_bridge->dev, VIA_GARTCTRL, &temp);
85 	temp |= (1<<7);
86 	pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, temp);
87 	temp &= ~(1<<7);
88 	pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, temp);
89 }
90 
91 
92 static const struct aper_size_info_8 via_generic_sizes[9] =
93 {
94 	{256, 65536, 6, 0},
95 	{128, 32768, 5, 128},
96 	{64, 16384, 4, 192},
97 	{32, 8192, 3, 224},
98 	{16, 4096, 2, 240},
99 	{8, 2048, 1, 248},
100 	{4, 1024, 0, 252},
101 	{2, 512, 0, 254},
102 	{1, 256, 0, 255}
103 };
104 
105 
106 static int via_fetch_size_agp3(void)
107 {
108 	int i;
109 	u16 temp;
110 	struct aper_size_info_16 *values;
111 
112 	values = A_SIZE_16(agp_bridge->driver->aperture_sizes);
113 	pci_read_config_word(agp_bridge->dev, VIA_AGP3_APSIZE, &temp);
114 	temp &= 0xfff;
115 
116 	for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
117 		if (temp == values[i].size_value) {
118 			agp_bridge->previous_size =
119 				agp_bridge->current_size = (void *) (values + i);
120 			agp_bridge->aperture_size_idx = i;
121 			return values[i].size;
122 		}
123 	}
124 	return 0;
125 }
126 
127 
128 static int via_configure_agp3(void)
129 {
130 	u32 temp;
131 
132 	/* address to map to */
133 	agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
134 						    AGP_APERTURE_BAR);
135 
136 	/* attbase - aperture GATT base */
137 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_ATTBASE,
138 		agp_bridge->gatt_bus_addr & 0xfffff000);
139 
140 	/* 1. Enable GTLB in RX90<7>, all AGP aperture access needs to fetch
141 	 *    translation table first.
142 	 * 2. Enable AGP aperture in RX91<0>. This bit controls the enabling of the
143 	 *    graphics AGP aperture for the AGP3.0 port.
144 	 */
145 	pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp);
146 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp | (3<<7));
147 	return 0;
148 }
149 
150 
151 static void via_cleanup_agp3(void)
152 {
153 	struct aper_size_info_16 *previous_size;
154 
155 	previous_size = A_SIZE_16(agp_bridge->previous_size);
156 	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE, previous_size->size_value);
157 }
158 
159 
160 static void via_tlbflush_agp3(struct agp_memory *mem)
161 {
162 	u32 temp;
163 
164 	pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp);
165 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp & ~(1<<7));
166 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp);
167 }
168 
169 
170 static const struct agp_bridge_driver via_agp3_driver = {
171 	.owner			= THIS_MODULE,
172 	.aperture_sizes		= agp3_generic_sizes,
173 	.size_type		= U8_APER_SIZE,
174 	.num_aperture_sizes	= 10,
175 	.needs_scratch_page	= true,
176 	.configure		= via_configure_agp3,
177 	.fetch_size		= via_fetch_size_agp3,
178 	.cleanup		= via_cleanup_agp3,
179 	.tlb_flush		= via_tlbflush_agp3,
180 	.mask_memory		= agp_generic_mask_memory,
181 	.masks			= NULL,
182 	.agp_enable		= agp_generic_enable,
183 	.cache_flush		= global_cache_flush,
184 	.create_gatt_table	= agp_generic_create_gatt_table,
185 	.free_gatt_table	= agp_generic_free_gatt_table,
186 	.insert_memory		= agp_generic_insert_memory,
187 	.remove_memory		= agp_generic_remove_memory,
188 	.alloc_by_type		= agp_generic_alloc_by_type,
189 	.free_by_type		= agp_generic_free_by_type,
190 	.agp_alloc_page		= agp_generic_alloc_page,
191 	.agp_alloc_pages	= agp_generic_alloc_pages,
192 	.agp_destroy_page	= agp_generic_destroy_page,
193 	.agp_destroy_pages	= agp_generic_destroy_pages,
194 	.agp_type_to_mask_type  = agp_generic_type_to_mask_type,
195 };
196 
197 static const struct agp_bridge_driver via_driver = {
198 	.owner			= THIS_MODULE,
199 	.aperture_sizes		= via_generic_sizes,
200 	.size_type		= U8_APER_SIZE,
201 	.num_aperture_sizes	= 9,
202 	.needs_scratch_page	= true,
203 	.configure		= via_configure,
204 	.fetch_size		= via_fetch_size,
205 	.cleanup		= via_cleanup,
206 	.tlb_flush		= via_tlbflush,
207 	.mask_memory		= agp_generic_mask_memory,
208 	.masks			= NULL,
209 	.agp_enable		= agp_generic_enable,
210 	.cache_flush		= global_cache_flush,
211 	.create_gatt_table	= agp_generic_create_gatt_table,
212 	.free_gatt_table	= agp_generic_free_gatt_table,
213 	.insert_memory		= agp_generic_insert_memory,
214 	.remove_memory		= agp_generic_remove_memory,
215 	.alloc_by_type		= agp_generic_alloc_by_type,
216 	.free_by_type		= agp_generic_free_by_type,
217 	.agp_alloc_page		= agp_generic_alloc_page,
218 	.agp_alloc_pages	= agp_generic_alloc_pages,
219 	.agp_destroy_page	= agp_generic_destroy_page,
220 	.agp_destroy_pages	= agp_generic_destroy_pages,
221 	.agp_type_to_mask_type  = agp_generic_type_to_mask_type,
222 };
223 
224 static struct agp_device_ids via_agp_device_ids[] =
225 {
226 	{
227 		.device_id	= PCI_DEVICE_ID_VIA_82C597_0,
228 		.chipset_name	= "Apollo VP3",
229 	},
230 
231 	{
232 		.device_id	= PCI_DEVICE_ID_VIA_82C598_0,
233 		.chipset_name	= "Apollo MVP3",
234 	},
235 
236 	{
237 		.device_id	= PCI_DEVICE_ID_VIA_8501_0,
238 		.chipset_name	= "Apollo MVP4",
239 	},
240 
241 	/* VT8601 */
242 	{
243 		.device_id	= PCI_DEVICE_ID_VIA_8601_0,
244 		.chipset_name	= "Apollo ProMedia/PLE133Ta",
245 	},
246 
247 	/* VT82C693A / VT28C694T */
248 	{
249 		.device_id	= PCI_DEVICE_ID_VIA_82C691_0,
250 		.chipset_name	= "Apollo Pro 133",
251 	},
252 
253 	{
254 		.device_id	= PCI_DEVICE_ID_VIA_8371_0,
255 		.chipset_name	= "KX133",
256 	},
257 
258 	/* VT8633 */
259 	{
260 		.device_id	= PCI_DEVICE_ID_VIA_8633_0,
261 		.chipset_name	= "Pro 266",
262 	},
263 
264 	{
265 		.device_id	= PCI_DEVICE_ID_VIA_XN266,
266 		.chipset_name	= "Apollo Pro266",
267 	},
268 
269 	/* VT8361 */
270 	{
271 		.device_id	= PCI_DEVICE_ID_VIA_8361,
272 		.chipset_name	= "KLE133",
273 	},
274 
275 	/* VT8365 / VT8362 */
276 	{
277 		.device_id	= PCI_DEVICE_ID_VIA_8363_0,
278 		.chipset_name	= "Twister-K/KT133x/KM133",
279 	},
280 
281 	/* VT8753A */
282 	{
283 		.device_id	= PCI_DEVICE_ID_VIA_8753_0,
284 		.chipset_name	= "P4X266",
285 	},
286 
287 	/* VT8366 */
288 	{
289 		.device_id	= PCI_DEVICE_ID_VIA_8367_0,
290 		.chipset_name	= "KT266/KY266x/KT333",
291 	},
292 
293 	/* VT8633 (for CuMine/ Celeron) */
294 	{
295 		.device_id	= PCI_DEVICE_ID_VIA_8653_0,
296 		.chipset_name	= "Pro266T",
297 	},
298 
299 	/* KM266 / PM266 */
300 	{
301 		.device_id	= PCI_DEVICE_ID_VIA_XM266,
302 		.chipset_name	= "PM266/KM266",
303 	},
304 
305 	/* CLE266 */
306 	{
307 		.device_id	= PCI_DEVICE_ID_VIA_862X_0,
308 		.chipset_name	= "CLE266",
309 	},
310 
311 	{
312 		.device_id	= PCI_DEVICE_ID_VIA_8377_0,
313 		.chipset_name	= "KT400/KT400A/KT600",
314 	},
315 
316 	/* VT8604 / VT8605 / VT8603
317 	 * (Apollo Pro133A chipset with S3 Savage4) */
318 	{
319 		.device_id	= PCI_DEVICE_ID_VIA_8605_0,
320 		.chipset_name	= "ProSavage PM133/PL133/PN133"
321 	},
322 
323 	/* P4M266x/P4N266 */
324 	{
325 		.device_id	= PCI_DEVICE_ID_VIA_8703_51_0,
326 		.chipset_name	= "P4M266x/P4N266",
327 	},
328 
329 	/* VT8754 */
330 	{
331 		.device_id	= PCI_DEVICE_ID_VIA_8754C_0,
332 		.chipset_name	= "PT800",
333 	},
334 
335 	/* P4X600 */
336 	{
337 		.device_id	= PCI_DEVICE_ID_VIA_8763_0,
338 		.chipset_name	= "P4X600"
339 	},
340 
341 	/* KM400 */
342 	{
343 		.device_id	= PCI_DEVICE_ID_VIA_8378_0,
344 		.chipset_name	= "KM400/KM400A",
345 	},
346 
347 	/* PT880 */
348 	{
349 		.device_id	= PCI_DEVICE_ID_VIA_PT880,
350 		.chipset_name	= "PT880",
351 	},
352 
353 	/* PT880 Ultra */
354 	{
355 		.device_id	= PCI_DEVICE_ID_VIA_PT880ULTRA,
356 		.chipset_name	= "PT880 Ultra",
357 	},
358 
359 	/* PT890 */
360 	{
361 		.device_id	= PCI_DEVICE_ID_VIA_8783_0,
362 		.chipset_name	= "PT890",
363 	},
364 
365 	/* PM800/PN800/PM880/PN880 */
366 	{
367 		.device_id	= PCI_DEVICE_ID_VIA_PX8X0_0,
368 		.chipset_name	= "PM800/PN800/PM880/PN880",
369 	},
370 	/* KT880 */
371 	{
372 		.device_id	= PCI_DEVICE_ID_VIA_3269_0,
373 		.chipset_name	= "KT880",
374 	},
375 	/* KTxxx/Px8xx */
376 	{
377 		.device_id	= PCI_DEVICE_ID_VIA_83_87XX_1,
378 		.chipset_name	= "VT83xx/VT87xx/KTxxx/Px8xx",
379 	},
380 	/* P4M800 */
381 	{
382 		.device_id	= PCI_DEVICE_ID_VIA_3296_0,
383 		.chipset_name	= "P4M800",
384 	},
385 	/* P4M800CE */
386 	{
387 		.device_id	= PCI_DEVICE_ID_VIA_P4M800CE,
388 		.chipset_name	= "VT3314",
389 	},
390 	/* VT3324 / CX700 */
391 	{
392 		.device_id  = PCI_DEVICE_ID_VIA_VT3324,
393 		.chipset_name   = "CX700",
394 	},
395 	/* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique
396 	 * architecture, the AGP resource and behavior are different from
397 	 * the traditional AGP which resides only in chipset. AGP is used
398 	 * by 3D driver which wasn't available for the VT3336 and VT3364
399 	 * generation until now.  Unfortunately, by testing, VT3364 works
400 	 * but VT3336 doesn't. - explanation from via, just leave this as
401 	 * as a placeholder to avoid future patches adding it back in.
402 	 */
403 #if 0
404 	{
405 		.device_id  = PCI_DEVICE_ID_VIA_VT3336,
406 		.chipset_name   = "VT3336",
407 	},
408 #endif
409 	/* P4M890 */
410 	{
411 		.device_id  = PCI_DEVICE_ID_VIA_P4M890,
412 		.chipset_name   = "P4M890",
413 	},
414 	/* P4M900 */
415 	{
416 		.device_id  = PCI_DEVICE_ID_VIA_VT3364,
417 		.chipset_name   = "P4M900",
418 	},
419 	{ }, /* dummy final entry, always present */
420 };
421 
422 
423 /*
424  * VIA's AGP3 chipsets do magick to put the AGP bridge compliant
425  * with the same standards version as the graphics card.
426  */
427 static void check_via_agp3 (struct agp_bridge_data *bridge)
428 {
429 	u8 reg;
430 
431 	pci_read_config_byte(bridge->dev, VIA_AGPSEL, &reg);
432 	/* Check AGP 2.0 compatibility mode. */
433 	if ((reg & (1<<1))==0)
434 		bridge->driver = &via_agp3_driver;
435 }
436 
437 
438 static int agp_via_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
439 {
440 	struct agp_device_ids *devs = via_agp_device_ids;
441 	struct agp_bridge_data *bridge;
442 	int j = 0;
443 	u8 cap_ptr;
444 
445 	cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
446 	if (!cap_ptr)
447 		return -ENODEV;
448 
449 	j = ent - agp_via_pci_table;
450 	printk (KERN_INFO PFX "Detected VIA %s chipset\n", devs[j].chipset_name);
451 
452 	bridge = agp_alloc_bridge();
453 	if (!bridge)
454 		return -ENOMEM;
455 
456 	bridge->dev = pdev;
457 	bridge->capndx = cap_ptr;
458 	bridge->driver = &via_driver;
459 
460 	/*
461 	 * Garg, there are KT400s with KT266 IDs.
462 	 */
463 	if (pdev->device == PCI_DEVICE_ID_VIA_8367_0) {
464 		/* Is there a KT400 subsystem ? */
465 		if (pdev->subsystem_device == PCI_DEVICE_ID_VIA_8377_0) {
466 			printk(KERN_INFO PFX "Found KT400 in disguise as a KT266.\n");
467 			check_via_agp3(bridge);
468 		}
469 	}
470 
471 	/* If this is an AGP3 bridge, check which mode its in and adjust. */
472 	get_agp_version(bridge);
473 	if (bridge->major_version >= 3)
474 		check_via_agp3(bridge);
475 
476 	/* Fill in the mode register */
477 	pci_read_config_dword(pdev,
478 			bridge->capndx+PCI_AGP_STATUS, &bridge->mode);
479 
480 	pci_set_drvdata(pdev, bridge);
481 	return agp_add_bridge(bridge);
482 }
483 
484 static void agp_via_remove(struct pci_dev *pdev)
485 {
486 	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
487 
488 	agp_remove_bridge(bridge);
489 	agp_put_bridge(bridge);
490 }
491 
492 #define agp_via_suspend NULL
493 
494 static int __maybe_unused agp_via_resume(struct device *dev)
495 {
496 	struct agp_bridge_data *bridge = dev_get_drvdata(dev);
497 
498 	if (bridge->driver == &via_agp3_driver)
499 		return via_configure_agp3();
500 	else if (bridge->driver == &via_driver)
501 		return via_configure();
502 
503 	return 0;
504 }
505 
506 /* must be the same order as name table above */
507 static const struct pci_device_id agp_via_pci_table[] = {
508 #define ID(x) \
509 	{						\
510 	.class		= (PCI_CLASS_BRIDGE_HOST << 8),	\
511 	.class_mask	= ~0,				\
512 	.vendor		= PCI_VENDOR_ID_VIA,		\
513 	.device		= x,				\
514 	.subvendor	= PCI_ANY_ID,			\
515 	.subdevice	= PCI_ANY_ID,			\
516 	}
517 	ID(PCI_DEVICE_ID_VIA_82C597_0),
518 	ID(PCI_DEVICE_ID_VIA_82C598_0),
519 	ID(PCI_DEVICE_ID_VIA_8501_0),
520 	ID(PCI_DEVICE_ID_VIA_8601_0),
521 	ID(PCI_DEVICE_ID_VIA_82C691_0),
522 	ID(PCI_DEVICE_ID_VIA_8371_0),
523 	ID(PCI_DEVICE_ID_VIA_8633_0),
524 	ID(PCI_DEVICE_ID_VIA_XN266),
525 	ID(PCI_DEVICE_ID_VIA_8361),
526 	ID(PCI_DEVICE_ID_VIA_8363_0),
527 	ID(PCI_DEVICE_ID_VIA_8753_0),
528 	ID(PCI_DEVICE_ID_VIA_8367_0),
529 	ID(PCI_DEVICE_ID_VIA_8653_0),
530 	ID(PCI_DEVICE_ID_VIA_XM266),
531 	ID(PCI_DEVICE_ID_VIA_862X_0),
532 	ID(PCI_DEVICE_ID_VIA_8377_0),
533 	ID(PCI_DEVICE_ID_VIA_8605_0),
534 	ID(PCI_DEVICE_ID_VIA_8703_51_0),
535 	ID(PCI_DEVICE_ID_VIA_8754C_0),
536 	ID(PCI_DEVICE_ID_VIA_8763_0),
537 	ID(PCI_DEVICE_ID_VIA_8378_0),
538 	ID(PCI_DEVICE_ID_VIA_PT880),
539 	ID(PCI_DEVICE_ID_VIA_PT880ULTRA),
540 	ID(PCI_DEVICE_ID_VIA_8783_0),
541 	ID(PCI_DEVICE_ID_VIA_PX8X0_0),
542 	ID(PCI_DEVICE_ID_VIA_3269_0),
543 	ID(PCI_DEVICE_ID_VIA_83_87XX_1),
544 	ID(PCI_DEVICE_ID_VIA_3296_0),
545 	ID(PCI_DEVICE_ID_VIA_P4M800CE),
546 	ID(PCI_DEVICE_ID_VIA_VT3324),
547 	ID(PCI_DEVICE_ID_VIA_P4M890),
548 	ID(PCI_DEVICE_ID_VIA_VT3364),
549 	{ }
550 };
551 
552 MODULE_DEVICE_TABLE(pci, agp_via_pci_table);
553 
554 static SIMPLE_DEV_PM_OPS(agp_via_pm_ops, agp_via_suspend, agp_via_resume);
555 
556 static struct pci_driver agp_via_pci_driver = {
557 	.name		= "agpgart-via",
558 	.id_table	= agp_via_pci_table,
559 	.probe		= agp_via_probe,
560 	.remove		= agp_via_remove,
561 	.driver.pm      = &agp_via_pm_ops,
562 };
563 
564 
565 static int __init agp_via_init(void)
566 {
567 	if (agp_off)
568 		return -EINVAL;
569 	return pci_register_driver(&agp_via_pci_driver);
570 }
571 
572 static void __exit agp_via_cleanup(void)
573 {
574 	pci_unregister_driver(&agp_via_pci_driver);
575 }
576 
577 module_init(agp_via_init);
578 module_exit(agp_via_cleanup);
579 
580 MODULE_LICENSE("GPL");
581 MODULE_AUTHOR("Dave Jones");
582