1 // SPDX-License-Identifier: GPL-2.0 2 // Copyright (c) 2018 MediaTek Inc. 3 4 /* 5 * Bluetooth support for MediaTek serial devices 6 * 7 * Author: Sean Wang <sean.wang@mediatek.com> 8 * 9 */ 10 11 #include <asm/unaligned.h> 12 #include <linux/atomic.h> 13 #include <linux/clk.h> 14 #include <linux/firmware.h> 15 #include <linux/gpio/consumer.h> 16 #include <linux/iopoll.h> 17 #include <linux/kernel.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/of_device.h> 21 #include <linux/pinctrl/consumer.h> 22 #include <linux/pm_runtime.h> 23 #include <linux/regulator/consumer.h> 24 #include <linux/serdev.h> 25 #include <linux/skbuff.h> 26 27 #include <net/bluetooth/bluetooth.h> 28 #include <net/bluetooth/hci_core.h> 29 30 #include "h4_recv.h" 31 32 #define VERSION "0.2" 33 34 #define FIRMWARE_MT7622 "mediatek/mt7622pr2h.bin" 35 #define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin" 36 #define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin" 37 38 #define MTK_STP_TLR_SIZE 2 39 40 #define BTMTKUART_TX_STATE_ACTIVE 1 41 #define BTMTKUART_TX_STATE_WAKEUP 2 42 #define BTMTKUART_TX_WAIT_VND_EVT 3 43 #define BTMTKUART_REQUIRED_WAKEUP 4 44 45 #define BTMTKUART_FLAG_STANDALONE_HW BIT(0) 46 47 enum { 48 MTK_WMT_PATCH_DWNLD = 0x1, 49 MTK_WMT_TEST = 0x2, 50 MTK_WMT_WAKEUP = 0x3, 51 MTK_WMT_HIF = 0x4, 52 MTK_WMT_FUNC_CTRL = 0x6, 53 MTK_WMT_RST = 0x7, 54 MTK_WMT_SEMAPHORE = 0x17, 55 }; 56 57 enum { 58 BTMTK_WMT_INVALID, 59 BTMTK_WMT_PATCH_UNDONE, 60 BTMTK_WMT_PATCH_DONE, 61 BTMTK_WMT_ON_UNDONE, 62 BTMTK_WMT_ON_DONE, 63 BTMTK_WMT_ON_PROGRESS, 64 }; 65 66 struct mtk_stp_hdr { 67 u8 prefix; 68 __be16 dlen; 69 u8 cs; 70 } __packed; 71 72 struct btmtkuart_data { 73 unsigned int flags; 74 const char *fwname; 75 }; 76 77 struct mtk_wmt_hdr { 78 u8 dir; 79 u8 op; 80 __le16 dlen; 81 u8 flag; 82 } __packed; 83 84 struct mtk_hci_wmt_cmd { 85 struct mtk_wmt_hdr hdr; 86 u8 data[256]; 87 } __packed; 88 89 struct btmtk_hci_wmt_evt { 90 struct hci_event_hdr hhdr; 91 struct mtk_wmt_hdr whdr; 92 } __packed; 93 94 struct btmtk_hci_wmt_evt_funcc { 95 struct btmtk_hci_wmt_evt hwhdr; 96 __be16 status; 97 } __packed; 98 99 struct btmtk_tci_sleep { 100 u8 mode; 101 __le16 duration; 102 __le16 host_duration; 103 u8 host_wakeup_pin; 104 u8 time_compensation; 105 } __packed; 106 107 struct btmtk_hci_wmt_params { 108 u8 op; 109 u8 flag; 110 u16 dlen; 111 const void *data; 112 u32 *status; 113 }; 114 115 struct btmtkuart_dev { 116 struct hci_dev *hdev; 117 struct serdev_device *serdev; 118 119 struct clk *clk; 120 struct clk *osc; 121 struct regulator *vcc; 122 struct gpio_desc *reset; 123 struct gpio_desc *boot; 124 struct pinctrl *pinctrl; 125 struct pinctrl_state *pins_runtime; 126 struct pinctrl_state *pins_boot; 127 speed_t desired_speed; 128 speed_t curr_speed; 129 130 struct work_struct tx_work; 131 unsigned long tx_state; 132 struct sk_buff_head txq; 133 134 struct sk_buff *rx_skb; 135 struct sk_buff *evt_skb; 136 137 u8 stp_pad[6]; 138 u8 stp_cursor; 139 u16 stp_dlen; 140 141 const struct btmtkuart_data *data; 142 }; 143 144 #define btmtkuart_is_standalone(bdev) \ 145 ((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW) 146 #define btmtkuart_is_builtin_soc(bdev) \ 147 !((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW) 148 149 static int mtk_hci_wmt_sync(struct hci_dev *hdev, 150 struct btmtk_hci_wmt_params *wmt_params) 151 { 152 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 153 struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc; 154 u32 hlen, status = BTMTK_WMT_INVALID; 155 struct btmtk_hci_wmt_evt *wmt_evt; 156 struct mtk_hci_wmt_cmd wc; 157 struct mtk_wmt_hdr *hdr; 158 int err; 159 160 hlen = sizeof(*hdr) + wmt_params->dlen; 161 if (hlen > 255) 162 return -EINVAL; 163 164 hdr = (struct mtk_wmt_hdr *)&wc; 165 hdr->dir = 1; 166 hdr->op = wmt_params->op; 167 hdr->dlen = cpu_to_le16(wmt_params->dlen + 1); 168 hdr->flag = wmt_params->flag; 169 memcpy(wc.data, wmt_params->data, wmt_params->dlen); 170 171 set_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 172 173 err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc); 174 if (err < 0) { 175 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 176 return err; 177 } 178 179 /* The vendor specific WMT commands are all answered by a vendor 180 * specific event and will not have the Command Status or Command 181 * Complete as with usual HCI command flow control. 182 * 183 * After sending the command, wait for BTMTKUART_TX_WAIT_VND_EVT 184 * state to be cleared. The driver specific event receive routine 185 * will clear that state and with that indicate completion of the 186 * WMT command. 187 */ 188 err = wait_on_bit_timeout(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT, 189 TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT); 190 if (err == -EINTR) { 191 bt_dev_err(hdev, "Execution of wmt command interrupted"); 192 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 193 return err; 194 } 195 196 if (err) { 197 bt_dev_err(hdev, "Execution of wmt command timed out"); 198 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 199 return -ETIMEDOUT; 200 } 201 202 /* Parse and handle the return WMT event */ 203 wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data; 204 if (wmt_evt->whdr.op != hdr->op) { 205 bt_dev_err(hdev, "Wrong op received %d expected %d", 206 wmt_evt->whdr.op, hdr->op); 207 err = -EIO; 208 goto err_free_skb; 209 } 210 211 switch (wmt_evt->whdr.op) { 212 case MTK_WMT_SEMAPHORE: 213 if (wmt_evt->whdr.flag == 2) 214 status = BTMTK_WMT_PATCH_UNDONE; 215 else 216 status = BTMTK_WMT_PATCH_DONE; 217 break; 218 case MTK_WMT_FUNC_CTRL: 219 wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt; 220 if (be16_to_cpu(wmt_evt_funcc->status) == 0x404) 221 status = BTMTK_WMT_ON_DONE; 222 else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420) 223 status = BTMTK_WMT_ON_PROGRESS; 224 else 225 status = BTMTK_WMT_ON_UNDONE; 226 break; 227 } 228 229 if (wmt_params->status) 230 *wmt_params->status = status; 231 232 err_free_skb: 233 kfree_skb(bdev->evt_skb); 234 bdev->evt_skb = NULL; 235 236 return err; 237 } 238 239 static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname) 240 { 241 struct btmtk_hci_wmt_params wmt_params; 242 const struct firmware *fw; 243 const u8 *fw_ptr; 244 size_t fw_size; 245 int err, dlen; 246 u8 flag; 247 248 err = request_firmware(&fw, fwname, &hdev->dev); 249 if (err < 0) { 250 bt_dev_err(hdev, "Failed to load firmware file (%d)", err); 251 return err; 252 } 253 254 fw_ptr = fw->data; 255 fw_size = fw->size; 256 257 /* The size of patch header is 30 bytes, should be skip */ 258 if (fw_size < 30) { 259 err = -EINVAL; 260 goto free_fw; 261 } 262 263 fw_size -= 30; 264 fw_ptr += 30; 265 flag = 1; 266 267 wmt_params.op = MTK_WMT_PATCH_DWNLD; 268 wmt_params.status = NULL; 269 270 while (fw_size > 0) { 271 dlen = min_t(int, 250, fw_size); 272 273 /* Tell device the position in sequence */ 274 if (fw_size - dlen <= 0) 275 flag = 3; 276 else if (fw_size < fw->size - 30) 277 flag = 2; 278 279 wmt_params.flag = flag; 280 wmt_params.dlen = dlen; 281 wmt_params.data = fw_ptr; 282 283 err = mtk_hci_wmt_sync(hdev, &wmt_params); 284 if (err < 0) { 285 bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)", 286 err); 287 goto free_fw; 288 } 289 290 fw_size -= dlen; 291 fw_ptr += dlen; 292 } 293 294 wmt_params.op = MTK_WMT_RST; 295 wmt_params.flag = 4; 296 wmt_params.dlen = 0; 297 wmt_params.data = NULL; 298 wmt_params.status = NULL; 299 300 /* Activate funciton the firmware providing to */ 301 err = mtk_hci_wmt_sync(hdev, &wmt_params); 302 if (err < 0) { 303 bt_dev_err(hdev, "Failed to send wmt rst (%d)", err); 304 goto free_fw; 305 } 306 307 /* Wait a few moments for firmware activation done */ 308 usleep_range(10000, 12000); 309 310 free_fw: 311 release_firmware(fw); 312 return err; 313 } 314 315 static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb) 316 { 317 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 318 struct hci_event_hdr *hdr = (void *)skb->data; 319 int err; 320 321 /* Fix up the vendor event id with 0xff for vendor specific instead 322 * of 0xe4 so that event send via monitoring socket can be parsed 323 * properly. 324 */ 325 if (hdr->evt == 0xe4) 326 hdr->evt = HCI_EV_VENDOR; 327 328 /* When someone waits for the WMT event, the skb is being cloned 329 * and being processed the events from there then. 330 */ 331 if (test_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) { 332 bdev->evt_skb = skb_clone(skb, GFP_KERNEL); 333 if (!bdev->evt_skb) { 334 err = -ENOMEM; 335 goto err_out; 336 } 337 } 338 339 err = hci_recv_frame(hdev, skb); 340 if (err < 0) 341 goto err_free_skb; 342 343 if (hdr->evt == HCI_EV_VENDOR) { 344 if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT, 345 &bdev->tx_state)) { 346 /* Barrier to sync with other CPUs */ 347 smp_mb__after_atomic(); 348 wake_up_bit(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT); 349 } 350 } 351 352 return 0; 353 354 err_free_skb: 355 kfree_skb(bdev->evt_skb); 356 bdev->evt_skb = NULL; 357 358 err_out: 359 return err; 360 } 361 362 static const struct h4_recv_pkt mtk_recv_pkts[] = { 363 { H4_RECV_ACL, .recv = hci_recv_frame }, 364 { H4_RECV_SCO, .recv = hci_recv_frame }, 365 { H4_RECV_EVENT, .recv = btmtkuart_recv_event }, 366 }; 367 368 static void btmtkuart_tx_work(struct work_struct *work) 369 { 370 struct btmtkuart_dev *bdev = container_of(work, struct btmtkuart_dev, 371 tx_work); 372 struct serdev_device *serdev = bdev->serdev; 373 struct hci_dev *hdev = bdev->hdev; 374 375 while (1) { 376 clear_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state); 377 378 while (1) { 379 struct sk_buff *skb = skb_dequeue(&bdev->txq); 380 int len; 381 382 if (!skb) 383 break; 384 385 len = serdev_device_write_buf(serdev, skb->data, 386 skb->len); 387 hdev->stat.byte_tx += len; 388 389 skb_pull(skb, len); 390 if (skb->len > 0) { 391 skb_queue_head(&bdev->txq, skb); 392 break; 393 } 394 395 switch (hci_skb_pkt_type(skb)) { 396 case HCI_COMMAND_PKT: 397 hdev->stat.cmd_tx++; 398 break; 399 case HCI_ACLDATA_PKT: 400 hdev->stat.acl_tx++; 401 break; 402 case HCI_SCODATA_PKT: 403 hdev->stat.sco_tx++; 404 break; 405 } 406 407 kfree_skb(skb); 408 } 409 410 if (!test_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state)) 411 break; 412 } 413 414 clear_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state); 415 } 416 417 static void btmtkuart_tx_wakeup(struct btmtkuart_dev *bdev) 418 { 419 if (test_and_set_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state)) 420 set_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state); 421 422 schedule_work(&bdev->tx_work); 423 } 424 425 static const unsigned char * 426 mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count, 427 int *sz_h4) 428 { 429 struct mtk_stp_hdr *shdr; 430 431 /* The cursor is reset when all the data of STP is consumed out */ 432 if (!bdev->stp_dlen && bdev->stp_cursor >= 6) 433 bdev->stp_cursor = 0; 434 435 /* Filling pad until all STP info is obtained */ 436 while (bdev->stp_cursor < 6 && count > 0) { 437 bdev->stp_pad[bdev->stp_cursor] = *data; 438 bdev->stp_cursor++; 439 data++; 440 count--; 441 } 442 443 /* Retrieve STP info and have a sanity check */ 444 if (!bdev->stp_dlen && bdev->stp_cursor >= 6) { 445 shdr = (struct mtk_stp_hdr *)&bdev->stp_pad[2]; 446 bdev->stp_dlen = be16_to_cpu(shdr->dlen) & 0x0fff; 447 448 /* Resync STP when unexpected data is being read */ 449 if (shdr->prefix != 0x80 || bdev->stp_dlen > 2048) { 450 bt_dev_err(bdev->hdev, "stp format unexpect (%d, %d)", 451 shdr->prefix, bdev->stp_dlen); 452 bdev->stp_cursor = 2; 453 bdev->stp_dlen = 0; 454 } 455 } 456 457 /* Directly quit when there's no data found for H4 can process */ 458 if (count <= 0) 459 return NULL; 460 461 /* Tranlate to how much the size of data H4 can handle so far */ 462 *sz_h4 = min_t(int, count, bdev->stp_dlen); 463 464 /* Update the remaining size of STP packet */ 465 bdev->stp_dlen -= *sz_h4; 466 467 /* Data points to STP payload which can be handled by H4 */ 468 return data; 469 } 470 471 static int btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count) 472 { 473 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 474 const unsigned char *p_left = data, *p_h4; 475 int sz_left = count, sz_h4, adv; 476 int err; 477 478 while (sz_left > 0) { 479 /* The serial data received from MT7622 BT controller is 480 * at all time padded around with the STP header and tailer. 481 * 482 * A full STP packet is looking like 483 * ----------------------------------- 484 * | STP header | H:4 | STP tailer | 485 * ----------------------------------- 486 * but it doesn't guarantee to contain a full H:4 packet which 487 * means that it's possible for multiple STP packets forms a 488 * full H:4 packet that means extra STP header + length doesn't 489 * indicate a full H:4 frame, things can fragment. Whose length 490 * recorded in STP header just shows up the most length the 491 * H:4 engine can handle currently. 492 */ 493 494 p_h4 = mtk_stp_split(bdev, p_left, sz_left, &sz_h4); 495 if (!p_h4) 496 break; 497 498 adv = p_h4 - p_left; 499 sz_left -= adv; 500 p_left += adv; 501 502 bdev->rx_skb = h4_recv_buf(bdev->hdev, bdev->rx_skb, p_h4, 503 sz_h4, mtk_recv_pkts, 504 ARRAY_SIZE(mtk_recv_pkts)); 505 if (IS_ERR(bdev->rx_skb)) { 506 err = PTR_ERR(bdev->rx_skb); 507 bt_dev_err(bdev->hdev, 508 "Frame reassembly failed (%d)", err); 509 bdev->rx_skb = NULL; 510 return err; 511 } 512 513 sz_left -= sz_h4; 514 p_left += sz_h4; 515 } 516 517 return 0; 518 } 519 520 static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data, 521 size_t count) 522 { 523 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 524 int err; 525 526 err = btmtkuart_recv(bdev->hdev, data, count); 527 if (err < 0) 528 return err; 529 530 bdev->hdev->stat.byte_rx += count; 531 532 return count; 533 } 534 535 static void btmtkuart_write_wakeup(struct serdev_device *serdev) 536 { 537 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 538 539 btmtkuart_tx_wakeup(bdev); 540 } 541 542 static const struct serdev_device_ops btmtkuart_client_ops = { 543 .receive_buf = btmtkuart_receive_buf, 544 .write_wakeup = btmtkuart_write_wakeup, 545 }; 546 547 static int btmtkuart_open(struct hci_dev *hdev) 548 { 549 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 550 struct device *dev; 551 int err; 552 553 err = serdev_device_open(bdev->serdev); 554 if (err) { 555 bt_dev_err(hdev, "Unable to open UART device %s", 556 dev_name(&bdev->serdev->dev)); 557 goto err_open; 558 } 559 560 if (btmtkuart_is_standalone(bdev)) { 561 if (bdev->curr_speed != bdev->desired_speed) 562 err = serdev_device_set_baudrate(bdev->serdev, 563 115200); 564 else 565 err = serdev_device_set_baudrate(bdev->serdev, 566 bdev->desired_speed); 567 568 if (err < 0) { 569 bt_dev_err(hdev, "Unable to set baudrate UART device %s", 570 dev_name(&bdev->serdev->dev)); 571 goto err_serdev_close; 572 } 573 574 serdev_device_set_flow_control(bdev->serdev, false); 575 } 576 577 bdev->stp_cursor = 2; 578 bdev->stp_dlen = 0; 579 580 dev = &bdev->serdev->dev; 581 582 /* Enable the power domain and clock the device requires */ 583 pm_runtime_enable(dev); 584 err = pm_runtime_get_sync(dev); 585 if (err < 0) { 586 pm_runtime_put_noidle(dev); 587 goto err_disable_rpm; 588 } 589 590 err = clk_prepare_enable(bdev->clk); 591 if (err < 0) 592 goto err_put_rpm; 593 594 return 0; 595 596 err_put_rpm: 597 pm_runtime_put_sync(dev); 598 err_disable_rpm: 599 pm_runtime_disable(dev); 600 err_serdev_close: 601 serdev_device_close(bdev->serdev); 602 err_open: 603 return err; 604 } 605 606 static int btmtkuart_close(struct hci_dev *hdev) 607 { 608 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 609 struct device *dev = &bdev->serdev->dev; 610 611 /* Shutdown the clock and power domain the device requires */ 612 clk_disable_unprepare(bdev->clk); 613 pm_runtime_put_sync(dev); 614 pm_runtime_disable(dev); 615 616 serdev_device_close(bdev->serdev); 617 618 return 0; 619 } 620 621 static int btmtkuart_flush(struct hci_dev *hdev) 622 { 623 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 624 625 /* Flush any pending characters */ 626 serdev_device_write_flush(bdev->serdev); 627 skb_queue_purge(&bdev->txq); 628 629 cancel_work_sync(&bdev->tx_work); 630 631 kfree_skb(bdev->rx_skb); 632 bdev->rx_skb = NULL; 633 634 bdev->stp_cursor = 2; 635 bdev->stp_dlen = 0; 636 637 return 0; 638 } 639 640 static int btmtkuart_func_query(struct hci_dev *hdev) 641 { 642 struct btmtk_hci_wmt_params wmt_params; 643 int status, err; 644 u8 param = 0; 645 646 /* Query whether the function is enabled */ 647 wmt_params.op = MTK_WMT_FUNC_CTRL; 648 wmt_params.flag = 4; 649 wmt_params.dlen = sizeof(param); 650 wmt_params.data = ¶m; 651 wmt_params.status = &status; 652 653 err = mtk_hci_wmt_sync(hdev, &wmt_params); 654 if (err < 0) { 655 bt_dev_err(hdev, "Failed to query function status (%d)", err); 656 return err; 657 } 658 659 return status; 660 } 661 662 static int btmtkuart_change_baudrate(struct hci_dev *hdev) 663 { 664 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 665 struct btmtk_hci_wmt_params wmt_params; 666 __le32 baudrate; 667 u8 param; 668 int err; 669 670 /* Indicate the device to enter the probe state the host is 671 * ready to change a new baudrate. 672 */ 673 baudrate = cpu_to_le32(bdev->desired_speed); 674 wmt_params.op = MTK_WMT_HIF; 675 wmt_params.flag = 1; 676 wmt_params.dlen = 4; 677 wmt_params.data = &baudrate; 678 wmt_params.status = NULL; 679 680 err = mtk_hci_wmt_sync(hdev, &wmt_params); 681 if (err < 0) { 682 bt_dev_err(hdev, "Failed to device baudrate (%d)", err); 683 return err; 684 } 685 686 err = serdev_device_set_baudrate(bdev->serdev, 687 bdev->desired_speed); 688 if (err < 0) { 689 bt_dev_err(hdev, "Failed to set up host baudrate (%d)", 690 err); 691 return err; 692 } 693 694 serdev_device_set_flow_control(bdev->serdev, false); 695 696 /* Send a dummy byte 0xff to activate the new baudrate */ 697 param = 0xff; 698 err = serdev_device_write(bdev->serdev, ¶m, sizeof(param), 699 MAX_SCHEDULE_TIMEOUT); 700 if (err < 0 || err < sizeof(param)) 701 return err; 702 703 serdev_device_wait_until_sent(bdev->serdev, 0); 704 705 /* Wait some time for the device changing baudrate done */ 706 usleep_range(20000, 22000); 707 708 /* Test the new baudrate */ 709 wmt_params.op = MTK_WMT_TEST; 710 wmt_params.flag = 7; 711 wmt_params.dlen = 0; 712 wmt_params.data = NULL; 713 wmt_params.status = NULL; 714 715 err = mtk_hci_wmt_sync(hdev, &wmt_params); 716 if (err < 0) { 717 bt_dev_err(hdev, "Failed to test new baudrate (%d)", 718 err); 719 return err; 720 } 721 722 bdev->curr_speed = bdev->desired_speed; 723 724 return 0; 725 } 726 727 static int btmtkuart_setup(struct hci_dev *hdev) 728 { 729 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 730 struct btmtk_hci_wmt_params wmt_params; 731 ktime_t calltime, delta, rettime; 732 struct btmtk_tci_sleep tci_sleep; 733 unsigned long long duration; 734 struct sk_buff *skb; 735 int err, status; 736 u8 param = 0x1; 737 738 calltime = ktime_get(); 739 740 /* Wakeup MCUSYS is required for certain devices before we start to 741 * do any setups. 742 */ 743 if (test_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state)) { 744 wmt_params.op = MTK_WMT_WAKEUP; 745 wmt_params.flag = 3; 746 wmt_params.dlen = 0; 747 wmt_params.data = NULL; 748 wmt_params.status = NULL; 749 750 err = mtk_hci_wmt_sync(hdev, &wmt_params); 751 if (err < 0) { 752 bt_dev_err(hdev, "Failed to wakeup the chip (%d)", err); 753 return err; 754 } 755 756 clear_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state); 757 } 758 759 if (btmtkuart_is_standalone(bdev)) 760 btmtkuart_change_baudrate(hdev); 761 762 /* Query whether the firmware is already download */ 763 wmt_params.op = MTK_WMT_SEMAPHORE; 764 wmt_params.flag = 1; 765 wmt_params.dlen = 0; 766 wmt_params.data = NULL; 767 wmt_params.status = &status; 768 769 err = mtk_hci_wmt_sync(hdev, &wmt_params); 770 if (err < 0) { 771 bt_dev_err(hdev, "Failed to query firmware status (%d)", err); 772 return err; 773 } 774 775 if (status == BTMTK_WMT_PATCH_DONE) { 776 bt_dev_info(hdev, "Firmware already downloaded"); 777 goto ignore_setup_fw; 778 } 779 780 /* Setup a firmware which the device definitely requires */ 781 err = mtk_setup_firmware(hdev, bdev->data->fwname); 782 if (err < 0) 783 return err; 784 785 ignore_setup_fw: 786 /* Query whether the device is already enabled */ 787 err = readx_poll_timeout(btmtkuart_func_query, hdev, status, 788 status < 0 || status != BTMTK_WMT_ON_PROGRESS, 789 2000, 5000000); 790 /* -ETIMEDOUT happens */ 791 if (err < 0) 792 return err; 793 794 /* The other errors happen in btusb_mtk_func_query */ 795 if (status < 0) 796 return status; 797 798 if (status == BTMTK_WMT_ON_DONE) { 799 bt_dev_info(hdev, "function already on"); 800 goto ignore_func_on; 801 } 802 803 /* Enable Bluetooth protocol */ 804 wmt_params.op = MTK_WMT_FUNC_CTRL; 805 wmt_params.flag = 0; 806 wmt_params.dlen = sizeof(param); 807 wmt_params.data = ¶m; 808 wmt_params.status = NULL; 809 810 err = mtk_hci_wmt_sync(hdev, &wmt_params); 811 if (err < 0) { 812 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); 813 return err; 814 } 815 816 ignore_func_on: 817 /* Apply the low power environment setup */ 818 tci_sleep.mode = 0x5; 819 tci_sleep.duration = cpu_to_le16(0x640); 820 tci_sleep.host_duration = cpu_to_le16(0x640); 821 tci_sleep.host_wakeup_pin = 0; 822 tci_sleep.time_compensation = 0; 823 824 skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep, 825 HCI_INIT_TIMEOUT); 826 if (IS_ERR(skb)) { 827 err = PTR_ERR(skb); 828 bt_dev_err(hdev, "Failed to apply low power setting (%d)", err); 829 return err; 830 } 831 kfree_skb(skb); 832 833 rettime = ktime_get(); 834 delta = ktime_sub(rettime, calltime); 835 duration = (unsigned long long)ktime_to_ns(delta) >> 10; 836 837 bt_dev_info(hdev, "Device setup in %llu usecs", duration); 838 839 return 0; 840 } 841 842 static int btmtkuart_shutdown(struct hci_dev *hdev) 843 { 844 struct btmtk_hci_wmt_params wmt_params; 845 u8 param = 0x0; 846 int err; 847 848 /* Disable the device */ 849 wmt_params.op = MTK_WMT_FUNC_CTRL; 850 wmt_params.flag = 0; 851 wmt_params.dlen = sizeof(param); 852 wmt_params.data = ¶m; 853 wmt_params.status = NULL; 854 855 err = mtk_hci_wmt_sync(hdev, &wmt_params); 856 if (err < 0) { 857 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); 858 return err; 859 } 860 861 return 0; 862 } 863 864 static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb) 865 { 866 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 867 struct mtk_stp_hdr *shdr; 868 int err, dlen, type = 0; 869 870 /* Prepend skb with frame type */ 871 memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); 872 873 /* Make sure that there is enough rooms for STP header and trailer */ 874 if (unlikely(skb_headroom(skb) < sizeof(*shdr)) || 875 (skb_tailroom(skb) < MTK_STP_TLR_SIZE)) { 876 err = pskb_expand_head(skb, sizeof(*shdr), MTK_STP_TLR_SIZE, 877 GFP_ATOMIC); 878 if (err < 0) 879 return err; 880 } 881 882 /* Add the STP header */ 883 dlen = skb->len; 884 shdr = skb_push(skb, sizeof(*shdr)); 885 shdr->prefix = 0x80; 886 shdr->dlen = cpu_to_be16((dlen & 0x0fff) | (type << 12)); 887 shdr->cs = 0; /* MT7622 doesn't care about checksum value */ 888 889 /* Add the STP trailer */ 890 skb_put_zero(skb, MTK_STP_TLR_SIZE); 891 892 skb_queue_tail(&bdev->txq, skb); 893 894 btmtkuart_tx_wakeup(bdev); 895 return 0; 896 } 897 898 static int btmtkuart_parse_dt(struct serdev_device *serdev) 899 { 900 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 901 struct device_node *node = serdev->dev.of_node; 902 u32 speed = 921600; 903 int err; 904 905 if (btmtkuart_is_standalone(bdev)) { 906 of_property_read_u32(node, "current-speed", &speed); 907 908 bdev->desired_speed = speed; 909 910 bdev->vcc = devm_regulator_get(&serdev->dev, "vcc"); 911 if (IS_ERR(bdev->vcc)) { 912 err = PTR_ERR(bdev->vcc); 913 return err; 914 } 915 916 bdev->osc = devm_clk_get_optional(&serdev->dev, "osc"); 917 if (IS_ERR(bdev->osc)) { 918 err = PTR_ERR(bdev->osc); 919 return err; 920 } 921 922 bdev->boot = devm_gpiod_get_optional(&serdev->dev, "boot", 923 GPIOD_OUT_LOW); 924 if (IS_ERR(bdev->boot)) { 925 err = PTR_ERR(bdev->boot); 926 return err; 927 } 928 929 bdev->pinctrl = devm_pinctrl_get(&serdev->dev); 930 if (IS_ERR(bdev->pinctrl)) { 931 err = PTR_ERR(bdev->pinctrl); 932 return err; 933 } 934 935 bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl, 936 "default"); 937 if (IS_ERR(bdev->pins_boot) && !bdev->boot) { 938 err = PTR_ERR(bdev->pins_boot); 939 dev_err(&serdev->dev, 940 "Should assign RXD to LOW at boot stage\n"); 941 return err; 942 } 943 944 bdev->pins_runtime = pinctrl_lookup_state(bdev->pinctrl, 945 "runtime"); 946 if (IS_ERR(bdev->pins_runtime)) { 947 err = PTR_ERR(bdev->pins_runtime); 948 return err; 949 } 950 951 bdev->reset = devm_gpiod_get_optional(&serdev->dev, "reset", 952 GPIOD_OUT_LOW); 953 if (IS_ERR(bdev->reset)) { 954 err = PTR_ERR(bdev->reset); 955 return err; 956 } 957 } else if (btmtkuart_is_builtin_soc(bdev)) { 958 bdev->clk = devm_clk_get(&serdev->dev, "ref"); 959 if (IS_ERR(bdev->clk)) 960 return PTR_ERR(bdev->clk); 961 } 962 963 return 0; 964 } 965 966 static int btmtkuart_probe(struct serdev_device *serdev) 967 { 968 struct btmtkuart_dev *bdev; 969 struct hci_dev *hdev; 970 int err; 971 972 bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL); 973 if (!bdev) 974 return -ENOMEM; 975 976 bdev->data = of_device_get_match_data(&serdev->dev); 977 if (!bdev->data) 978 return -ENODEV; 979 980 bdev->serdev = serdev; 981 serdev_device_set_drvdata(serdev, bdev); 982 983 serdev_device_set_client_ops(serdev, &btmtkuart_client_ops); 984 985 err = btmtkuart_parse_dt(serdev); 986 if (err < 0) 987 return err; 988 989 INIT_WORK(&bdev->tx_work, btmtkuart_tx_work); 990 skb_queue_head_init(&bdev->txq); 991 992 /* Initialize and register HCI device */ 993 hdev = hci_alloc_dev(); 994 if (!hdev) { 995 dev_err(&serdev->dev, "Can't allocate HCI device\n"); 996 return -ENOMEM; 997 } 998 999 bdev->hdev = hdev; 1000 1001 hdev->bus = HCI_UART; 1002 hci_set_drvdata(hdev, bdev); 1003 1004 hdev->open = btmtkuart_open; 1005 hdev->close = btmtkuart_close; 1006 hdev->flush = btmtkuart_flush; 1007 hdev->setup = btmtkuart_setup; 1008 hdev->shutdown = btmtkuart_shutdown; 1009 hdev->send = btmtkuart_send_frame; 1010 SET_HCIDEV_DEV(hdev, &serdev->dev); 1011 1012 hdev->manufacturer = 70; 1013 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); 1014 1015 if (btmtkuart_is_standalone(bdev)) { 1016 err = clk_prepare_enable(bdev->osc); 1017 if (err < 0) 1018 return err; 1019 1020 if (bdev->boot) { 1021 gpiod_set_value_cansleep(bdev->boot, 1); 1022 } else { 1023 /* Switch to the specific pin state for the booting 1024 * requires. 1025 */ 1026 pinctrl_select_state(bdev->pinctrl, bdev->pins_boot); 1027 } 1028 1029 /* Power on */ 1030 err = regulator_enable(bdev->vcc); 1031 if (err < 0) { 1032 clk_disable_unprepare(bdev->osc); 1033 return err; 1034 } 1035 1036 /* Reset if the reset-gpios is available otherwise the board 1037 * -level design should be guaranteed. 1038 */ 1039 if (bdev->reset) { 1040 gpiod_set_value_cansleep(bdev->reset, 1); 1041 usleep_range(1000, 2000); 1042 gpiod_set_value_cansleep(bdev->reset, 0); 1043 } 1044 1045 /* Wait some time until device got ready and switch to the pin 1046 * mode the device requires for UART transfers. 1047 */ 1048 msleep(50); 1049 1050 if (bdev->boot) 1051 devm_gpiod_put(&serdev->dev, bdev->boot); 1052 1053 pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime); 1054 1055 /* A standalone device doesn't depends on power domain on SoC, 1056 * so mark it as no callbacks. 1057 */ 1058 pm_runtime_no_callbacks(&serdev->dev); 1059 1060 set_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state); 1061 } 1062 1063 err = hci_register_dev(hdev); 1064 if (err < 0) { 1065 dev_err(&serdev->dev, "Can't register HCI device\n"); 1066 hci_free_dev(hdev); 1067 goto err_regulator_disable; 1068 } 1069 1070 return 0; 1071 1072 err_regulator_disable: 1073 if (btmtkuart_is_standalone(bdev)) 1074 regulator_disable(bdev->vcc); 1075 1076 return err; 1077 } 1078 1079 static void btmtkuart_remove(struct serdev_device *serdev) 1080 { 1081 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 1082 struct hci_dev *hdev = bdev->hdev; 1083 1084 if (btmtkuart_is_standalone(bdev)) { 1085 regulator_disable(bdev->vcc); 1086 clk_disable_unprepare(bdev->osc); 1087 } 1088 1089 hci_unregister_dev(hdev); 1090 hci_free_dev(hdev); 1091 } 1092 1093 static const struct btmtkuart_data mt7622_data = { 1094 .fwname = FIRMWARE_MT7622, 1095 }; 1096 1097 static const struct btmtkuart_data mt7663_data = { 1098 .flags = BTMTKUART_FLAG_STANDALONE_HW, 1099 .fwname = FIRMWARE_MT7663, 1100 }; 1101 1102 static const struct btmtkuart_data mt7668_data = { 1103 .flags = BTMTKUART_FLAG_STANDALONE_HW, 1104 .fwname = FIRMWARE_MT7668, 1105 }; 1106 1107 #ifdef CONFIG_OF 1108 static const struct of_device_id mtk_of_match_table[] = { 1109 { .compatible = "mediatek,mt7622-bluetooth", .data = &mt7622_data}, 1110 { .compatible = "mediatek,mt7663u-bluetooth", .data = &mt7663_data}, 1111 { .compatible = "mediatek,mt7668u-bluetooth", .data = &mt7668_data}, 1112 { } 1113 }; 1114 MODULE_DEVICE_TABLE(of, mtk_of_match_table); 1115 #endif 1116 1117 static struct serdev_device_driver btmtkuart_driver = { 1118 .probe = btmtkuart_probe, 1119 .remove = btmtkuart_remove, 1120 .driver = { 1121 .name = "btmtkuart", 1122 .of_match_table = of_match_ptr(mtk_of_match_table), 1123 }, 1124 }; 1125 1126 module_serdev_device_driver(btmtkuart_driver); 1127 1128 MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); 1129 MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION); 1130 MODULE_VERSION(VERSION); 1131 MODULE_LICENSE("GPL"); 1132 MODULE_FIRMWARE(FIRMWARE_MT7622); 1133 MODULE_FIRMWARE(FIRMWARE_MT7663); 1134 MODULE_FIRMWARE(FIRMWARE_MT7668); 1135