1 // SPDX-License-Identifier: GPL-2.0 2 // Copyright (c) 2018 MediaTek Inc. 3 4 /* 5 * Bluetooth support for MediaTek serial devices 6 * 7 * Author: Sean Wang <sean.wang@mediatek.com> 8 * 9 */ 10 11 #include <asm/unaligned.h> 12 #include <linux/atomic.h> 13 #include <linux/clk.h> 14 #include <linux/firmware.h> 15 #include <linux/gpio/consumer.h> 16 #include <linux/iopoll.h> 17 #include <linux/kernel.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/of_device.h> 21 #include <linux/pinctrl/consumer.h> 22 #include <linux/pm_runtime.h> 23 #include <linux/regulator/consumer.h> 24 #include <linux/serdev.h> 25 #include <linux/skbuff.h> 26 27 #include <net/bluetooth/bluetooth.h> 28 #include <net/bluetooth/hci_core.h> 29 30 #include "h4_recv.h" 31 32 #define VERSION "0.2" 33 34 #define FIRMWARE_MT7622 "mediatek/mt7622pr2h.bin" 35 #define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin" 36 #define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin" 37 38 #define MTK_STP_TLR_SIZE 2 39 40 #define BTMTKUART_TX_STATE_ACTIVE 1 41 #define BTMTKUART_TX_STATE_WAKEUP 2 42 #define BTMTKUART_TX_WAIT_VND_EVT 3 43 #define BTMTKUART_REQUIRED_WAKEUP 4 44 45 #define BTMTKUART_FLAG_STANDALONE_HW BIT(0) 46 47 enum { 48 MTK_WMT_PATCH_DWNLD = 0x1, 49 MTK_WMT_TEST = 0x2, 50 MTK_WMT_WAKEUP = 0x3, 51 MTK_WMT_HIF = 0x4, 52 MTK_WMT_FUNC_CTRL = 0x6, 53 MTK_WMT_RST = 0x7, 54 MTK_WMT_SEMAPHORE = 0x17, 55 }; 56 57 enum { 58 BTMTK_WMT_INVALID, 59 BTMTK_WMT_PATCH_UNDONE, 60 BTMTK_WMT_PATCH_DONE, 61 BTMTK_WMT_ON_UNDONE, 62 BTMTK_WMT_ON_DONE, 63 BTMTK_WMT_ON_PROGRESS, 64 }; 65 66 struct mtk_stp_hdr { 67 u8 prefix; 68 __be16 dlen; 69 u8 cs; 70 } __packed; 71 72 struct btmtkuart_data { 73 unsigned int flags; 74 const char *fwname; 75 }; 76 77 struct mtk_wmt_hdr { 78 u8 dir; 79 u8 op; 80 __le16 dlen; 81 u8 flag; 82 } __packed; 83 84 struct mtk_hci_wmt_cmd { 85 struct mtk_wmt_hdr hdr; 86 u8 data[256]; 87 } __packed; 88 89 struct btmtk_hci_wmt_evt { 90 struct hci_event_hdr hhdr; 91 struct mtk_wmt_hdr whdr; 92 } __packed; 93 94 struct btmtk_hci_wmt_evt_funcc { 95 struct btmtk_hci_wmt_evt hwhdr; 96 __be16 status; 97 } __packed; 98 99 struct btmtk_tci_sleep { 100 u8 mode; 101 __le16 duration; 102 __le16 host_duration; 103 u8 host_wakeup_pin; 104 u8 time_compensation; 105 } __packed; 106 107 struct btmtk_hci_wmt_params { 108 u8 op; 109 u8 flag; 110 u16 dlen; 111 const void *data; 112 u32 *status; 113 }; 114 115 struct btmtkuart_dev { 116 struct hci_dev *hdev; 117 struct serdev_device *serdev; 118 struct clk *clk; 119 120 struct regulator *vcc; 121 struct gpio_desc *reset; 122 struct pinctrl *pinctrl; 123 struct pinctrl_state *pins_runtime; 124 struct pinctrl_state *pins_boot; 125 speed_t desired_speed; 126 speed_t curr_speed; 127 128 struct work_struct tx_work; 129 unsigned long tx_state; 130 struct sk_buff_head txq; 131 132 struct sk_buff *rx_skb; 133 struct sk_buff *evt_skb; 134 135 u8 stp_pad[6]; 136 u8 stp_cursor; 137 u16 stp_dlen; 138 139 const struct btmtkuart_data *data; 140 }; 141 142 #define btmtkuart_is_standalone(bdev) \ 143 ((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW) 144 #define btmtkuart_is_builtin_soc(bdev) \ 145 !((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW) 146 147 static int mtk_hci_wmt_sync(struct hci_dev *hdev, 148 struct btmtk_hci_wmt_params *wmt_params) 149 { 150 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 151 struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc; 152 u32 hlen, status = BTMTK_WMT_INVALID; 153 struct btmtk_hci_wmt_evt *wmt_evt; 154 struct mtk_hci_wmt_cmd wc; 155 struct mtk_wmt_hdr *hdr; 156 int err; 157 158 hlen = sizeof(*hdr) + wmt_params->dlen; 159 if (hlen > 255) 160 return -EINVAL; 161 162 hdr = (struct mtk_wmt_hdr *)&wc; 163 hdr->dir = 1; 164 hdr->op = wmt_params->op; 165 hdr->dlen = cpu_to_le16(wmt_params->dlen + 1); 166 hdr->flag = wmt_params->flag; 167 memcpy(wc.data, wmt_params->data, wmt_params->dlen); 168 169 set_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 170 171 err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc); 172 if (err < 0) { 173 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 174 return err; 175 } 176 177 /* The vendor specific WMT commands are all answered by a vendor 178 * specific event and will not have the Command Status or Command 179 * Complete as with usual HCI command flow control. 180 * 181 * After sending the command, wait for BTMTKUART_TX_WAIT_VND_EVT 182 * state to be cleared. The driver specific event receive routine 183 * will clear that state and with that indicate completion of the 184 * WMT command. 185 */ 186 err = wait_on_bit_timeout(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT, 187 TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT); 188 if (err == -EINTR) { 189 bt_dev_err(hdev, "Execution of wmt command interrupted"); 190 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 191 return err; 192 } 193 194 if (err) { 195 bt_dev_err(hdev, "Execution of wmt command timed out"); 196 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); 197 return -ETIMEDOUT; 198 } 199 200 /* Parse and handle the return WMT event */ 201 wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data; 202 if (wmt_evt->whdr.op != hdr->op) { 203 bt_dev_err(hdev, "Wrong op received %d expected %d", 204 wmt_evt->whdr.op, hdr->op); 205 err = -EIO; 206 goto err_free_skb; 207 } 208 209 switch (wmt_evt->whdr.op) { 210 case MTK_WMT_SEMAPHORE: 211 if (wmt_evt->whdr.flag == 2) 212 status = BTMTK_WMT_PATCH_UNDONE; 213 else 214 status = BTMTK_WMT_PATCH_DONE; 215 break; 216 case MTK_WMT_FUNC_CTRL: 217 wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt; 218 if (be16_to_cpu(wmt_evt_funcc->status) == 0x404) 219 status = BTMTK_WMT_ON_DONE; 220 else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420) 221 status = BTMTK_WMT_ON_PROGRESS; 222 else 223 status = BTMTK_WMT_ON_UNDONE; 224 break; 225 } 226 227 if (wmt_params->status) 228 *wmt_params->status = status; 229 230 err_free_skb: 231 kfree_skb(bdev->evt_skb); 232 bdev->evt_skb = NULL; 233 234 return err; 235 } 236 237 static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname) 238 { 239 struct btmtk_hci_wmt_params wmt_params; 240 const struct firmware *fw; 241 const u8 *fw_ptr; 242 size_t fw_size; 243 int err, dlen; 244 u8 flag; 245 246 err = request_firmware(&fw, fwname, &hdev->dev); 247 if (err < 0) { 248 bt_dev_err(hdev, "Failed to load firmware file (%d)", err); 249 return err; 250 } 251 252 fw_ptr = fw->data; 253 fw_size = fw->size; 254 255 /* The size of patch header is 30 bytes, should be skip */ 256 if (fw_size < 30) { 257 err = -EINVAL; 258 goto free_fw; 259 } 260 261 fw_size -= 30; 262 fw_ptr += 30; 263 flag = 1; 264 265 wmt_params.op = MTK_WMT_PATCH_DWNLD; 266 wmt_params.status = NULL; 267 268 while (fw_size > 0) { 269 dlen = min_t(int, 250, fw_size); 270 271 /* Tell device the position in sequence */ 272 if (fw_size - dlen <= 0) 273 flag = 3; 274 else if (fw_size < fw->size - 30) 275 flag = 2; 276 277 wmt_params.flag = flag; 278 wmt_params.dlen = dlen; 279 wmt_params.data = fw_ptr; 280 281 err = mtk_hci_wmt_sync(hdev, &wmt_params); 282 if (err < 0) { 283 bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)", 284 err); 285 goto free_fw; 286 } 287 288 fw_size -= dlen; 289 fw_ptr += dlen; 290 } 291 292 wmt_params.op = MTK_WMT_RST; 293 wmt_params.flag = 4; 294 wmt_params.dlen = 0; 295 wmt_params.data = NULL; 296 wmt_params.status = NULL; 297 298 /* Activate funciton the firmware providing to */ 299 err = mtk_hci_wmt_sync(hdev, &wmt_params); 300 if (err < 0) { 301 bt_dev_err(hdev, "Failed to send wmt rst (%d)", err); 302 goto free_fw; 303 } 304 305 /* Wait a few moments for firmware activation done */ 306 usleep_range(10000, 12000); 307 308 free_fw: 309 release_firmware(fw); 310 return err; 311 } 312 313 static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb) 314 { 315 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 316 struct hci_event_hdr *hdr = (void *)skb->data; 317 int err; 318 319 /* Fix up the vendor event id with 0xff for vendor specific instead 320 * of 0xe4 so that event send via monitoring socket can be parsed 321 * properly. 322 */ 323 if (hdr->evt == 0xe4) 324 hdr->evt = HCI_EV_VENDOR; 325 326 /* When someone waits for the WMT event, the skb is being cloned 327 * and being processed the events from there then. 328 */ 329 if (test_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) { 330 bdev->evt_skb = skb_clone(skb, GFP_KERNEL); 331 if (!bdev->evt_skb) { 332 err = -ENOMEM; 333 goto err_out; 334 } 335 } 336 337 err = hci_recv_frame(hdev, skb); 338 if (err < 0) 339 goto err_free_skb; 340 341 if (hdr->evt == HCI_EV_VENDOR) { 342 if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT, 343 &bdev->tx_state)) { 344 /* Barrier to sync with other CPUs */ 345 smp_mb__after_atomic(); 346 wake_up_bit(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT); 347 } 348 } 349 350 return 0; 351 352 err_free_skb: 353 kfree_skb(bdev->evt_skb); 354 bdev->evt_skb = NULL; 355 356 err_out: 357 return err; 358 } 359 360 static const struct h4_recv_pkt mtk_recv_pkts[] = { 361 { H4_RECV_ACL, .recv = hci_recv_frame }, 362 { H4_RECV_SCO, .recv = hci_recv_frame }, 363 { H4_RECV_EVENT, .recv = btmtkuart_recv_event }, 364 }; 365 366 static void btmtkuart_tx_work(struct work_struct *work) 367 { 368 struct btmtkuart_dev *bdev = container_of(work, struct btmtkuart_dev, 369 tx_work); 370 struct serdev_device *serdev = bdev->serdev; 371 struct hci_dev *hdev = bdev->hdev; 372 373 while (1) { 374 clear_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state); 375 376 while (1) { 377 struct sk_buff *skb = skb_dequeue(&bdev->txq); 378 int len; 379 380 if (!skb) 381 break; 382 383 len = serdev_device_write_buf(serdev, skb->data, 384 skb->len); 385 hdev->stat.byte_tx += len; 386 387 skb_pull(skb, len); 388 if (skb->len > 0) { 389 skb_queue_head(&bdev->txq, skb); 390 break; 391 } 392 393 switch (hci_skb_pkt_type(skb)) { 394 case HCI_COMMAND_PKT: 395 hdev->stat.cmd_tx++; 396 break; 397 case HCI_ACLDATA_PKT: 398 hdev->stat.acl_tx++; 399 break; 400 case HCI_SCODATA_PKT: 401 hdev->stat.sco_tx++; 402 break; 403 } 404 405 kfree_skb(skb); 406 } 407 408 if (!test_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state)) 409 break; 410 } 411 412 clear_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state); 413 } 414 415 static void btmtkuart_tx_wakeup(struct btmtkuart_dev *bdev) 416 { 417 if (test_and_set_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state)) 418 set_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state); 419 420 schedule_work(&bdev->tx_work); 421 } 422 423 static const unsigned char * 424 mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count, 425 int *sz_h4) 426 { 427 struct mtk_stp_hdr *shdr; 428 429 /* The cursor is reset when all the data of STP is consumed out */ 430 if (!bdev->stp_dlen && bdev->stp_cursor >= 6) 431 bdev->stp_cursor = 0; 432 433 /* Filling pad until all STP info is obtained */ 434 while (bdev->stp_cursor < 6 && count > 0) { 435 bdev->stp_pad[bdev->stp_cursor] = *data; 436 bdev->stp_cursor++; 437 data++; 438 count--; 439 } 440 441 /* Retrieve STP info and have a sanity check */ 442 if (!bdev->stp_dlen && bdev->stp_cursor >= 6) { 443 shdr = (struct mtk_stp_hdr *)&bdev->stp_pad[2]; 444 bdev->stp_dlen = be16_to_cpu(shdr->dlen) & 0x0fff; 445 446 /* Resync STP when unexpected data is being read */ 447 if (shdr->prefix != 0x80 || bdev->stp_dlen > 2048) { 448 bt_dev_err(bdev->hdev, "stp format unexpect (%d, %d)", 449 shdr->prefix, bdev->stp_dlen); 450 bdev->stp_cursor = 2; 451 bdev->stp_dlen = 0; 452 } 453 } 454 455 /* Directly quit when there's no data found for H4 can process */ 456 if (count <= 0) 457 return NULL; 458 459 /* Tranlate to how much the size of data H4 can handle so far */ 460 *sz_h4 = min_t(int, count, bdev->stp_dlen); 461 462 /* Update the remaining size of STP packet */ 463 bdev->stp_dlen -= *sz_h4; 464 465 /* Data points to STP payload which can be handled by H4 */ 466 return data; 467 } 468 469 static int btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count) 470 { 471 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 472 const unsigned char *p_left = data, *p_h4; 473 int sz_left = count, sz_h4, adv; 474 int err; 475 476 while (sz_left > 0) { 477 /* The serial data received from MT7622 BT controller is 478 * at all time padded around with the STP header and tailer. 479 * 480 * A full STP packet is looking like 481 * ----------------------------------- 482 * | STP header | H:4 | STP tailer | 483 * ----------------------------------- 484 * but it doesn't guarantee to contain a full H:4 packet which 485 * means that it's possible for multiple STP packets forms a 486 * full H:4 packet that means extra STP header + length doesn't 487 * indicate a full H:4 frame, things can fragment. Whose length 488 * recorded in STP header just shows up the most length the 489 * H:4 engine can handle currently. 490 */ 491 492 p_h4 = mtk_stp_split(bdev, p_left, sz_left, &sz_h4); 493 if (!p_h4) 494 break; 495 496 adv = p_h4 - p_left; 497 sz_left -= adv; 498 p_left += adv; 499 500 bdev->rx_skb = h4_recv_buf(bdev->hdev, bdev->rx_skb, p_h4, 501 sz_h4, mtk_recv_pkts, 502 ARRAY_SIZE(mtk_recv_pkts)); 503 if (IS_ERR(bdev->rx_skb)) { 504 err = PTR_ERR(bdev->rx_skb); 505 bt_dev_err(bdev->hdev, 506 "Frame reassembly failed (%d)", err); 507 bdev->rx_skb = NULL; 508 return err; 509 } 510 511 sz_left -= sz_h4; 512 p_left += sz_h4; 513 } 514 515 return 0; 516 } 517 518 static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data, 519 size_t count) 520 { 521 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 522 int err; 523 524 err = btmtkuart_recv(bdev->hdev, data, count); 525 if (err < 0) 526 return err; 527 528 bdev->hdev->stat.byte_rx += count; 529 530 return count; 531 } 532 533 static void btmtkuart_write_wakeup(struct serdev_device *serdev) 534 { 535 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 536 537 btmtkuart_tx_wakeup(bdev); 538 } 539 540 static const struct serdev_device_ops btmtkuart_client_ops = { 541 .receive_buf = btmtkuart_receive_buf, 542 .write_wakeup = btmtkuart_write_wakeup, 543 }; 544 545 static int btmtkuart_open(struct hci_dev *hdev) 546 { 547 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 548 struct device *dev; 549 int err; 550 551 err = serdev_device_open(bdev->serdev); 552 if (err) { 553 bt_dev_err(hdev, "Unable to open UART device %s", 554 dev_name(&bdev->serdev->dev)); 555 goto err_open; 556 } 557 558 if (btmtkuart_is_standalone(bdev)) { 559 if (bdev->curr_speed != bdev->desired_speed) 560 err = serdev_device_set_baudrate(bdev->serdev, 561 115200); 562 else 563 err = serdev_device_set_baudrate(bdev->serdev, 564 bdev->desired_speed); 565 566 if (err < 0) { 567 bt_dev_err(hdev, "Unable to set baudrate UART device %s", 568 dev_name(&bdev->serdev->dev)); 569 goto err_serdev_close; 570 } 571 572 serdev_device_set_flow_control(bdev->serdev, false); 573 } 574 575 bdev->stp_cursor = 2; 576 bdev->stp_dlen = 0; 577 578 dev = &bdev->serdev->dev; 579 580 /* Enable the power domain and clock the device requires */ 581 pm_runtime_enable(dev); 582 err = pm_runtime_get_sync(dev); 583 if (err < 0) { 584 pm_runtime_put_noidle(dev); 585 goto err_disable_rpm; 586 } 587 588 err = clk_prepare_enable(bdev->clk); 589 if (err < 0) 590 goto err_put_rpm; 591 592 return 0; 593 594 err_put_rpm: 595 pm_runtime_put_sync(dev); 596 err_disable_rpm: 597 pm_runtime_disable(dev); 598 err_serdev_close: 599 serdev_device_close(bdev->serdev); 600 err_open: 601 return err; 602 } 603 604 static int btmtkuart_close(struct hci_dev *hdev) 605 { 606 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 607 struct device *dev = &bdev->serdev->dev; 608 609 /* Shutdown the clock and power domain the device requires */ 610 clk_disable_unprepare(bdev->clk); 611 pm_runtime_put_sync(dev); 612 pm_runtime_disable(dev); 613 614 serdev_device_close(bdev->serdev); 615 616 return 0; 617 } 618 619 static int btmtkuart_flush(struct hci_dev *hdev) 620 { 621 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 622 623 /* Flush any pending characters */ 624 serdev_device_write_flush(bdev->serdev); 625 skb_queue_purge(&bdev->txq); 626 627 cancel_work_sync(&bdev->tx_work); 628 629 kfree_skb(bdev->rx_skb); 630 bdev->rx_skb = NULL; 631 632 bdev->stp_cursor = 2; 633 bdev->stp_dlen = 0; 634 635 return 0; 636 } 637 638 static int btmtkuart_func_query(struct hci_dev *hdev) 639 { 640 struct btmtk_hci_wmt_params wmt_params; 641 int status, err; 642 u8 param = 0; 643 644 /* Query whether the function is enabled */ 645 wmt_params.op = MTK_WMT_FUNC_CTRL; 646 wmt_params.flag = 4; 647 wmt_params.dlen = sizeof(param); 648 wmt_params.data = ¶m; 649 wmt_params.status = &status; 650 651 err = mtk_hci_wmt_sync(hdev, &wmt_params); 652 if (err < 0) { 653 bt_dev_err(hdev, "Failed to query function status (%d)", err); 654 return err; 655 } 656 657 return status; 658 } 659 660 static int btmtkuart_change_baudrate(struct hci_dev *hdev) 661 { 662 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 663 struct btmtk_hci_wmt_params wmt_params; 664 __le32 baudrate; 665 u8 param; 666 int err; 667 668 /* Indicate the device to enter the probe state the host is 669 * ready to change a new baudrate. 670 */ 671 baudrate = cpu_to_le32(bdev->desired_speed); 672 wmt_params.op = MTK_WMT_HIF; 673 wmt_params.flag = 1; 674 wmt_params.dlen = 4; 675 wmt_params.data = &baudrate; 676 wmt_params.status = NULL; 677 678 err = mtk_hci_wmt_sync(hdev, &wmt_params); 679 if (err < 0) { 680 bt_dev_err(hdev, "Failed to device baudrate (%d)", err); 681 return err; 682 } 683 684 err = serdev_device_set_baudrate(bdev->serdev, 685 bdev->desired_speed); 686 if (err < 0) { 687 bt_dev_err(hdev, "Failed to set up host baudrate (%d)", 688 err); 689 return err; 690 } 691 692 serdev_device_set_flow_control(bdev->serdev, false); 693 694 /* Send a dummy byte 0xff to activate the new baudrate */ 695 param = 0xff; 696 err = serdev_device_write(bdev->serdev, ¶m, sizeof(param), 697 MAX_SCHEDULE_TIMEOUT); 698 if (err < 0 || err < sizeof(param)) 699 return err; 700 701 serdev_device_wait_until_sent(bdev->serdev, 0); 702 703 /* Wait some time for the device changing baudrate done */ 704 usleep_range(20000, 22000); 705 706 /* Test the new baudrate */ 707 wmt_params.op = MTK_WMT_TEST; 708 wmt_params.flag = 7; 709 wmt_params.dlen = 0; 710 wmt_params.data = NULL; 711 wmt_params.status = NULL; 712 713 err = mtk_hci_wmt_sync(hdev, &wmt_params); 714 if (err < 0) { 715 bt_dev_err(hdev, "Failed to test new baudrate (%d)", 716 err); 717 return err; 718 } 719 720 bdev->curr_speed = bdev->desired_speed; 721 722 return 0; 723 } 724 725 static int btmtkuart_setup(struct hci_dev *hdev) 726 { 727 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 728 struct btmtk_hci_wmt_params wmt_params; 729 ktime_t calltime, delta, rettime; 730 struct btmtk_tci_sleep tci_sleep; 731 unsigned long long duration; 732 struct sk_buff *skb; 733 int err, status; 734 u8 param = 0x1; 735 736 calltime = ktime_get(); 737 738 /* Wakeup MCUSYS is required for certain devices before we start to 739 * do any setups. 740 */ 741 if (test_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state)) { 742 wmt_params.op = MTK_WMT_WAKEUP; 743 wmt_params.flag = 3; 744 wmt_params.dlen = 0; 745 wmt_params.data = NULL; 746 wmt_params.status = NULL; 747 748 err = mtk_hci_wmt_sync(hdev, &wmt_params); 749 if (err < 0) { 750 bt_dev_err(hdev, "Failed to wakeup the chip (%d)", err); 751 return err; 752 } 753 754 clear_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state); 755 } 756 757 if (btmtkuart_is_standalone(bdev)) 758 btmtkuart_change_baudrate(hdev); 759 760 /* Query whether the firmware is already download */ 761 wmt_params.op = MTK_WMT_SEMAPHORE; 762 wmt_params.flag = 1; 763 wmt_params.dlen = 0; 764 wmt_params.data = NULL; 765 wmt_params.status = &status; 766 767 err = mtk_hci_wmt_sync(hdev, &wmt_params); 768 if (err < 0) { 769 bt_dev_err(hdev, "Failed to query firmware status (%d)", err); 770 return err; 771 } 772 773 if (status == BTMTK_WMT_PATCH_DONE) { 774 bt_dev_info(hdev, "Firmware already downloaded"); 775 goto ignore_setup_fw; 776 } 777 778 /* Setup a firmware which the device definitely requires */ 779 err = mtk_setup_firmware(hdev, bdev->data->fwname); 780 if (err < 0) 781 return err; 782 783 ignore_setup_fw: 784 /* Query whether the device is already enabled */ 785 err = readx_poll_timeout(btmtkuart_func_query, hdev, status, 786 status < 0 || status != BTMTK_WMT_ON_PROGRESS, 787 2000, 5000000); 788 /* -ETIMEDOUT happens */ 789 if (err < 0) 790 return err; 791 792 /* The other errors happen in btusb_mtk_func_query */ 793 if (status < 0) 794 return status; 795 796 if (status == BTMTK_WMT_ON_DONE) { 797 bt_dev_info(hdev, "function already on"); 798 goto ignore_func_on; 799 } 800 801 /* Enable Bluetooth protocol */ 802 wmt_params.op = MTK_WMT_FUNC_CTRL; 803 wmt_params.flag = 0; 804 wmt_params.dlen = sizeof(param); 805 wmt_params.data = ¶m; 806 wmt_params.status = NULL; 807 808 err = mtk_hci_wmt_sync(hdev, &wmt_params); 809 if (err < 0) { 810 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); 811 return err; 812 } 813 814 ignore_func_on: 815 /* Apply the low power environment setup */ 816 tci_sleep.mode = 0x5; 817 tci_sleep.duration = cpu_to_le16(0x640); 818 tci_sleep.host_duration = cpu_to_le16(0x640); 819 tci_sleep.host_wakeup_pin = 0; 820 tci_sleep.time_compensation = 0; 821 822 skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep, 823 HCI_INIT_TIMEOUT); 824 if (IS_ERR(skb)) { 825 err = PTR_ERR(skb); 826 bt_dev_err(hdev, "Failed to apply low power setting (%d)", err); 827 return err; 828 } 829 kfree_skb(skb); 830 831 rettime = ktime_get(); 832 delta = ktime_sub(rettime, calltime); 833 duration = (unsigned long long)ktime_to_ns(delta) >> 10; 834 835 bt_dev_info(hdev, "Device setup in %llu usecs", duration); 836 837 return 0; 838 } 839 840 static int btmtkuart_shutdown(struct hci_dev *hdev) 841 { 842 struct btmtk_hci_wmt_params wmt_params; 843 u8 param = 0x0; 844 int err; 845 846 /* Disable the device */ 847 wmt_params.op = MTK_WMT_FUNC_CTRL; 848 wmt_params.flag = 0; 849 wmt_params.dlen = sizeof(param); 850 wmt_params.data = ¶m; 851 wmt_params.status = NULL; 852 853 err = mtk_hci_wmt_sync(hdev, &wmt_params); 854 if (err < 0) { 855 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); 856 return err; 857 } 858 859 return 0; 860 } 861 862 static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb) 863 { 864 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 865 struct mtk_stp_hdr *shdr; 866 int err, dlen, type = 0; 867 868 /* Prepend skb with frame type */ 869 memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); 870 871 /* Make sure that there is enough rooms for STP header and trailer */ 872 if (unlikely(skb_headroom(skb) < sizeof(*shdr)) || 873 (skb_tailroom(skb) < MTK_STP_TLR_SIZE)) { 874 err = pskb_expand_head(skb, sizeof(*shdr), MTK_STP_TLR_SIZE, 875 GFP_ATOMIC); 876 if (err < 0) 877 return err; 878 } 879 880 /* Add the STP header */ 881 dlen = skb->len; 882 shdr = skb_push(skb, sizeof(*shdr)); 883 shdr->prefix = 0x80; 884 shdr->dlen = cpu_to_be16((dlen & 0x0fff) | (type << 12)); 885 shdr->cs = 0; /* MT7622 doesn't care about checksum value */ 886 887 /* Add the STP trailer */ 888 skb_put_zero(skb, MTK_STP_TLR_SIZE); 889 890 skb_queue_tail(&bdev->txq, skb); 891 892 btmtkuart_tx_wakeup(bdev); 893 return 0; 894 } 895 896 static int btmtkuart_parse_dt(struct serdev_device *serdev) 897 { 898 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 899 struct device_node *node = serdev->dev.of_node; 900 u32 speed = 921600; 901 int err; 902 903 if (btmtkuart_is_standalone(bdev)) { 904 of_property_read_u32(node, "current-speed", &speed); 905 906 bdev->desired_speed = speed; 907 908 bdev->vcc = devm_regulator_get(&serdev->dev, "vcc"); 909 if (IS_ERR(bdev->vcc)) { 910 err = PTR_ERR(bdev->vcc); 911 return err; 912 } 913 914 bdev->pinctrl = devm_pinctrl_get(&serdev->dev); 915 if (IS_ERR(bdev->pinctrl)) { 916 err = PTR_ERR(bdev->pinctrl); 917 return err; 918 } 919 920 bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl, 921 "default"); 922 if (IS_ERR(bdev->pins_boot)) { 923 err = PTR_ERR(bdev->pins_boot); 924 return err; 925 } 926 927 bdev->pins_runtime = pinctrl_lookup_state(bdev->pinctrl, 928 "runtime"); 929 if (IS_ERR(bdev->pins_runtime)) { 930 err = PTR_ERR(bdev->pins_runtime); 931 return err; 932 } 933 934 bdev->reset = devm_gpiod_get_optional(&serdev->dev, "reset", 935 GPIOD_OUT_LOW); 936 if (IS_ERR(bdev->reset)) { 937 err = PTR_ERR(bdev->reset); 938 return err; 939 } 940 } else if (btmtkuart_is_builtin_soc(bdev)) { 941 bdev->clk = devm_clk_get(&serdev->dev, "ref"); 942 if (IS_ERR(bdev->clk)) 943 return PTR_ERR(bdev->clk); 944 } 945 946 return 0; 947 } 948 949 static int btmtkuart_probe(struct serdev_device *serdev) 950 { 951 struct btmtkuart_dev *bdev; 952 struct hci_dev *hdev; 953 int err; 954 955 bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL); 956 if (!bdev) 957 return -ENOMEM; 958 959 bdev->data = of_device_get_match_data(&serdev->dev); 960 if (!bdev->data) 961 return -ENODEV; 962 963 bdev->serdev = serdev; 964 serdev_device_set_drvdata(serdev, bdev); 965 966 serdev_device_set_client_ops(serdev, &btmtkuart_client_ops); 967 968 err = btmtkuart_parse_dt(serdev); 969 if (err < 0) 970 return err; 971 972 INIT_WORK(&bdev->tx_work, btmtkuart_tx_work); 973 skb_queue_head_init(&bdev->txq); 974 975 /* Initialize and register HCI device */ 976 hdev = hci_alloc_dev(); 977 if (!hdev) { 978 dev_err(&serdev->dev, "Can't allocate HCI device\n"); 979 return -ENOMEM; 980 } 981 982 bdev->hdev = hdev; 983 984 hdev->bus = HCI_UART; 985 hci_set_drvdata(hdev, bdev); 986 987 hdev->open = btmtkuart_open; 988 hdev->close = btmtkuart_close; 989 hdev->flush = btmtkuart_flush; 990 hdev->setup = btmtkuart_setup; 991 hdev->shutdown = btmtkuart_shutdown; 992 hdev->send = btmtkuart_send_frame; 993 SET_HCIDEV_DEV(hdev, &serdev->dev); 994 995 hdev->manufacturer = 70; 996 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); 997 998 if (btmtkuart_is_standalone(bdev)) { 999 /* Switch to the specific pin state for the booting requires */ 1000 pinctrl_select_state(bdev->pinctrl, bdev->pins_boot); 1001 1002 /* Power on */ 1003 err = regulator_enable(bdev->vcc); 1004 if (err < 0) 1005 return err; 1006 1007 /* Reset if the reset-gpios is available otherwise the board 1008 * -level design should be guaranteed. 1009 */ 1010 if (bdev->reset) { 1011 gpiod_set_value_cansleep(bdev->reset, 1); 1012 usleep_range(1000, 2000); 1013 gpiod_set_value_cansleep(bdev->reset, 0); 1014 } 1015 1016 /* Wait some time until device got ready and switch to the pin 1017 * mode the device requires for UART transfers. 1018 */ 1019 msleep(50); 1020 pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime); 1021 1022 /* A standalone device doesn't depends on power domain on SoC, 1023 * so mark it as no callbacks. 1024 */ 1025 pm_runtime_no_callbacks(&serdev->dev); 1026 1027 set_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state); 1028 } 1029 1030 err = hci_register_dev(hdev); 1031 if (err < 0) { 1032 dev_err(&serdev->dev, "Can't register HCI device\n"); 1033 hci_free_dev(hdev); 1034 goto err_regulator_disable; 1035 } 1036 1037 return 0; 1038 1039 err_regulator_disable: 1040 if (btmtkuart_is_standalone(bdev)) { 1041 pinctrl_select_state(bdev->pinctrl, bdev->pins_boot); 1042 regulator_disable(bdev->vcc); 1043 } 1044 1045 return err; 1046 } 1047 1048 static void btmtkuart_remove(struct serdev_device *serdev) 1049 { 1050 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); 1051 struct hci_dev *hdev = bdev->hdev; 1052 1053 if (btmtkuart_is_standalone(bdev)) { 1054 pinctrl_select_state(bdev->pinctrl, bdev->pins_boot); 1055 regulator_disable(bdev->vcc); 1056 } 1057 1058 hci_unregister_dev(hdev); 1059 hci_free_dev(hdev); 1060 } 1061 1062 static const struct btmtkuart_data mt7622_data = { 1063 .fwname = FIRMWARE_MT7622, 1064 }; 1065 1066 static const struct btmtkuart_data mt7663_data = { 1067 .flags = BTMTKUART_FLAG_STANDALONE_HW, 1068 .fwname = FIRMWARE_MT7663, 1069 }; 1070 1071 static const struct btmtkuart_data mt7668_data = { 1072 .flags = BTMTKUART_FLAG_STANDALONE_HW, 1073 .fwname = FIRMWARE_MT7668, 1074 }; 1075 1076 #ifdef CONFIG_OF 1077 static const struct of_device_id mtk_of_match_table[] = { 1078 { .compatible = "mediatek,mt7622-bluetooth", .data = &mt7622_data}, 1079 { .compatible = "mediatek,mt7663u-bluetooth", .data = &mt7663_data}, 1080 { .compatible = "mediatek,mt7668u-bluetooth", .data = &mt7668_data}, 1081 { } 1082 }; 1083 MODULE_DEVICE_TABLE(of, mtk_of_match_table); 1084 #endif 1085 1086 static struct serdev_device_driver btmtkuart_driver = { 1087 .probe = btmtkuart_probe, 1088 .remove = btmtkuart_remove, 1089 .driver = { 1090 .name = "btmtkuart", 1091 .of_match_table = of_match_ptr(mtk_of_match_table), 1092 }, 1093 }; 1094 1095 module_serdev_device_driver(btmtkuart_driver); 1096 1097 MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); 1098 MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION); 1099 MODULE_VERSION(VERSION); 1100 MODULE_LICENSE("GPL"); 1101 MODULE_FIRMWARE(FIRMWARE_MT7622); 1102 MODULE_FIRMWARE(FIRMWARE_MT7663); 1103 MODULE_FIRMWARE(FIRMWARE_MT7668); 1104