xref: /openbmc/linux/drivers/bluetooth/bt3c_cs.c (revision 6391503b)
1 /*
2  *
3  *  Driver for the 3Com Bluetooth PCMCIA card
4  *
5  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
6  *                           Jose Orlando Pereira <jop@di.uminho.pt>
7  *
8  *
9  *  This program is free software; you can redistribute it and/or modify
10  *  it under the terms of the GNU General Public License version 2 as
11  *  published by the Free Software Foundation;
12  *
13  *  Software distributed under the License is distributed on an "AS
14  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
15  *  implied. See the License for the specific language governing
16  *  rights and limitations under the License.
17  *
18  *  The initial developer of the original code is David A. Hinds
19  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
20  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
21  *
22  */
23 
24 #include <linux/module.h>
25 
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/slab.h>
29 #include <linux/types.h>
30 #include <linux/delay.h>
31 #include <linux/errno.h>
32 #include <linux/ptrace.h>
33 #include <linux/ioport.h>
34 #include <linux/spinlock.h>
35 #include <linux/moduleparam.h>
36 
37 #include <linux/skbuff.h>
38 #include <linux/string.h>
39 #include <linux/serial.h>
40 #include <linux/serial_reg.h>
41 #include <linux/bitops.h>
42 #include <asm/io.h>
43 
44 #include <linux/device.h>
45 #include <linux/firmware.h>
46 
47 #include <pcmcia/cistpl.h>
48 #include <pcmcia/ciscode.h>
49 #include <pcmcia/ds.h>
50 #include <pcmcia/cisreg.h>
51 
52 #include <net/bluetooth/bluetooth.h>
53 #include <net/bluetooth/hci_core.h>
54 
55 
56 
57 /* ======================== Module parameters ======================== */
58 
59 
60 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
61 MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
62 MODULE_LICENSE("GPL");
63 MODULE_FIRMWARE("BT3CPCC.bin");
64 
65 
66 
67 /* ======================== Local structures ======================== */
68 
69 
70 struct bt3c_info {
71 	struct pcmcia_device *p_dev;
72 
73 	struct hci_dev *hdev;
74 
75 	spinlock_t lock;		/* For serializing operations */
76 
77 	struct sk_buff_head txq;
78 	unsigned long tx_state;
79 
80 	unsigned long rx_state;
81 	unsigned long rx_count;
82 	struct sk_buff *rx_skb;
83 };
84 
85 
86 static int bt3c_config(struct pcmcia_device *link);
87 static void bt3c_release(struct pcmcia_device *link);
88 
89 static void bt3c_detach(struct pcmcia_device *p_dev);
90 
91 
92 /* Transmit states  */
93 #define XMIT_SENDING  1
94 #define XMIT_WAKEUP   2
95 #define XMIT_WAITING  8
96 
97 /* Receiver states */
98 #define RECV_WAIT_PACKET_TYPE   0
99 #define RECV_WAIT_EVENT_HEADER  1
100 #define RECV_WAIT_ACL_HEADER    2
101 #define RECV_WAIT_SCO_HEADER    3
102 #define RECV_WAIT_DATA          4
103 
104 
105 
106 /* ======================== Special I/O functions ======================== */
107 
108 
109 #define DATA_L   0
110 #define DATA_H   1
111 #define ADDR_L   2
112 #define ADDR_H   3
113 #define CONTROL  4
114 
115 
116 static inline void bt3c_address(unsigned int iobase, unsigned short addr)
117 {
118 	outb(addr & 0xff, iobase + ADDR_L);
119 	outb((addr >> 8) & 0xff, iobase + ADDR_H);
120 }
121 
122 
123 static inline void bt3c_put(unsigned int iobase, unsigned short value)
124 {
125 	outb(value & 0xff, iobase + DATA_L);
126 	outb((value >> 8) & 0xff, iobase + DATA_H);
127 }
128 
129 
130 static inline void bt3c_io_write(unsigned int iobase, unsigned short addr, unsigned short value)
131 {
132 	bt3c_address(iobase, addr);
133 	bt3c_put(iobase, value);
134 }
135 
136 
137 static inline unsigned short bt3c_get(unsigned int iobase)
138 {
139 	unsigned short value = inb(iobase + DATA_L);
140 
141 	value |= inb(iobase + DATA_H) << 8;
142 
143 	return value;
144 }
145 
146 
147 static inline unsigned short bt3c_read(unsigned int iobase, unsigned short addr)
148 {
149 	bt3c_address(iobase, addr);
150 
151 	return bt3c_get(iobase);
152 }
153 
154 
155 
156 /* ======================== Interrupt handling ======================== */
157 
158 
159 static int bt3c_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
160 {
161 	int actual = 0;
162 
163 	bt3c_address(iobase, 0x7080);
164 
165 	/* Fill FIFO with current frame */
166 	while (actual < len) {
167 		/* Transmit next byte */
168 		bt3c_put(iobase, buf[actual]);
169 		actual++;
170 	}
171 
172 	bt3c_io_write(iobase, 0x7005, actual);
173 
174 	return actual;
175 }
176 
177 
178 static void bt3c_write_wakeup(struct bt3c_info *info)
179 {
180 	if (!info) {
181 		BT_ERR("Unknown device");
182 		return;
183 	}
184 
185 	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state)))
186 		return;
187 
188 	do {
189 		unsigned int iobase = info->p_dev->resource[0]->start;
190 		register struct sk_buff *skb;
191 		int len;
192 
193 		if (!pcmcia_dev_present(info->p_dev))
194 			break;
195 
196 		skb = skb_dequeue(&(info->txq));
197 		if (!skb) {
198 			clear_bit(XMIT_SENDING, &(info->tx_state));
199 			break;
200 		}
201 
202 		/* Send frame */
203 		len = bt3c_write(iobase, 256, skb->data, skb->len);
204 
205 		if (len != skb->len)
206 			BT_ERR("Very strange");
207 
208 		kfree_skb(skb);
209 
210 		info->hdev->stat.byte_tx += len;
211 
212 	} while (0);
213 }
214 
215 
216 static void bt3c_receive(struct bt3c_info *info)
217 {
218 	unsigned int iobase;
219 	int size = 0, avail;
220 
221 	if (!info) {
222 		BT_ERR("Unknown device");
223 		return;
224 	}
225 
226 	iobase = info->p_dev->resource[0]->start;
227 
228 	avail = bt3c_read(iobase, 0x7006);
229 
230 	bt3c_address(iobase, 0x7480);
231 	while (size < avail) {
232 		size++;
233 		info->hdev->stat.byte_rx++;
234 
235 		/* Allocate packet */
236 		if (!info->rx_skb) {
237 			info->rx_state = RECV_WAIT_PACKET_TYPE;
238 			info->rx_count = 0;
239 			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
240 			if (!info->rx_skb) {
241 				BT_ERR("Can't allocate mem for new packet");
242 				return;
243 			}
244 		}
245 
246 
247 		if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
248 
249 			hci_skb_pkt_type(info->rx_skb) = inb(iobase + DATA_L);
250 			inb(iobase + DATA_H);
251 
252 			switch (hci_skb_pkt_type(info->rx_skb)) {
253 
254 			case HCI_EVENT_PKT:
255 				info->rx_state = RECV_WAIT_EVENT_HEADER;
256 				info->rx_count = HCI_EVENT_HDR_SIZE;
257 				break;
258 
259 			case HCI_ACLDATA_PKT:
260 				info->rx_state = RECV_WAIT_ACL_HEADER;
261 				info->rx_count = HCI_ACL_HDR_SIZE;
262 				break;
263 
264 			case HCI_SCODATA_PKT:
265 				info->rx_state = RECV_WAIT_SCO_HEADER;
266 				info->rx_count = HCI_SCO_HDR_SIZE;
267 				break;
268 
269 			default:
270 				/* Unknown packet */
271 				BT_ERR("Unknown HCI packet with type 0x%02x received",
272 				       hci_skb_pkt_type(info->rx_skb));
273 				info->hdev->stat.err_rx++;
274 
275 				kfree_skb(info->rx_skb);
276 				info->rx_skb = NULL;
277 				break;
278 
279 			}
280 
281 		} else {
282 
283 			__u8 x = inb(iobase + DATA_L);
284 
285 			*skb_put(info->rx_skb, 1) = x;
286 			inb(iobase + DATA_H);
287 			info->rx_count--;
288 
289 			if (info->rx_count == 0) {
290 
291 				int dlen;
292 				struct hci_event_hdr *eh;
293 				struct hci_acl_hdr *ah;
294 				struct hci_sco_hdr *sh;
295 
296 				switch (info->rx_state) {
297 
298 				case RECV_WAIT_EVENT_HEADER:
299 					eh = hci_event_hdr(info->rx_skb);
300 					info->rx_state = RECV_WAIT_DATA;
301 					info->rx_count = eh->plen;
302 					break;
303 
304 				case RECV_WAIT_ACL_HEADER:
305 					ah = hci_acl_hdr(info->rx_skb);
306 					dlen = __le16_to_cpu(ah->dlen);
307 					info->rx_state = RECV_WAIT_DATA;
308 					info->rx_count = dlen;
309 					break;
310 
311 				case RECV_WAIT_SCO_HEADER:
312 					sh = hci_sco_hdr(info->rx_skb);
313 					info->rx_state = RECV_WAIT_DATA;
314 					info->rx_count = sh->dlen;
315 					break;
316 
317 				case RECV_WAIT_DATA:
318 					hci_recv_frame(info->hdev, info->rx_skb);
319 					info->rx_skb = NULL;
320 					break;
321 
322 				}
323 
324 			}
325 
326 		}
327 
328 	}
329 
330 	bt3c_io_write(iobase, 0x7006, 0x0000);
331 }
332 
333 
334 static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
335 {
336 	struct bt3c_info *info = dev_inst;
337 	unsigned int iobase;
338 	int iir;
339 	irqreturn_t r = IRQ_NONE;
340 
341 	if (!info || !info->hdev)
342 		/* our irq handler is shared */
343 		return IRQ_NONE;
344 
345 	iobase = info->p_dev->resource[0]->start;
346 
347 	spin_lock(&(info->lock));
348 
349 	iir = inb(iobase + CONTROL);
350 	if (iir & 0x80) {
351 		int stat = bt3c_read(iobase, 0x7001);
352 
353 		if ((stat & 0xff) == 0x7f) {
354 			BT_ERR("Very strange (stat=0x%04x)", stat);
355 		} else if ((stat & 0xff) != 0xff) {
356 			if (stat & 0x0020) {
357 				int status = bt3c_read(iobase, 0x7002) & 0x10;
358 				BT_INFO("%s: Antenna %s", info->hdev->name,
359 							status ? "out" : "in");
360 			}
361 			if (stat & 0x0001)
362 				bt3c_receive(info);
363 			if (stat & 0x0002) {
364 				clear_bit(XMIT_SENDING, &(info->tx_state));
365 				bt3c_write_wakeup(info);
366 			}
367 
368 			bt3c_io_write(iobase, 0x7001, 0x0000);
369 
370 			outb(iir, iobase + CONTROL);
371 		}
372 		r = IRQ_HANDLED;
373 	}
374 
375 	spin_unlock(&(info->lock));
376 
377 	return r;
378 }
379 
380 
381 
382 /* ======================== HCI interface ======================== */
383 
384 
385 static int bt3c_hci_flush(struct hci_dev *hdev)
386 {
387 	struct bt3c_info *info = hci_get_drvdata(hdev);
388 
389 	/* Drop TX queue */
390 	skb_queue_purge(&(info->txq));
391 
392 	return 0;
393 }
394 
395 
396 static int bt3c_hci_open(struct hci_dev *hdev)
397 {
398 	return 0;
399 }
400 
401 
402 static int bt3c_hci_close(struct hci_dev *hdev)
403 {
404 	bt3c_hci_flush(hdev);
405 
406 	return 0;
407 }
408 
409 
410 static int bt3c_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
411 {
412 	struct bt3c_info *info = hci_get_drvdata(hdev);
413 	unsigned long flags;
414 
415 	switch (hci_skb_pkt_type(skb)) {
416 	case HCI_COMMAND_PKT:
417 		hdev->stat.cmd_tx++;
418 		break;
419 	case HCI_ACLDATA_PKT:
420 		hdev->stat.acl_tx++;
421 		break;
422 	case HCI_SCODATA_PKT:
423 		hdev->stat.sco_tx++;
424 		break;
425 	}
426 
427 	/* Prepend skb with frame type */
428 	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
429 	skb_queue_tail(&(info->txq), skb);
430 
431 	spin_lock_irqsave(&(info->lock), flags);
432 
433 	bt3c_write_wakeup(info);
434 
435 	spin_unlock_irqrestore(&(info->lock), flags);
436 
437 	return 0;
438 }
439 
440 
441 
442 /* ======================== Card services HCI interaction ======================== */
443 
444 
445 static int bt3c_load_firmware(struct bt3c_info *info,
446 			      const unsigned char *firmware,
447 			      int count)
448 {
449 	char *ptr = (char *) firmware;
450 	char b[9];
451 	unsigned int iobase, tmp;
452 	unsigned long size, addr, fcs;
453 	int i, err = 0;
454 
455 	iobase = info->p_dev->resource[0]->start;
456 
457 	/* Reset */
458 	bt3c_io_write(iobase, 0x8040, 0x0404);
459 	bt3c_io_write(iobase, 0x8040, 0x0400);
460 
461 	udelay(1);
462 
463 	bt3c_io_write(iobase, 0x8040, 0x0404);
464 
465 	udelay(17);
466 
467 	/* Load */
468 	while (count) {
469 		if (ptr[0] != 'S') {
470 			BT_ERR("Bad address in firmware");
471 			err = -EFAULT;
472 			goto error;
473 		}
474 
475 		memset(b, 0, sizeof(b));
476 		memcpy(b, ptr + 2, 2);
477 		if (kstrtoul(b, 16, &size) < 0)
478 			return -EINVAL;
479 
480 		memset(b, 0, sizeof(b));
481 		memcpy(b, ptr + 4, 8);
482 		if (kstrtoul(b, 16, &addr) < 0)
483 			return -EINVAL;
484 
485 		memset(b, 0, sizeof(b));
486 		memcpy(b, ptr + (size * 2) + 2, 2);
487 		if (kstrtoul(b, 16, &fcs) < 0)
488 			return -EINVAL;
489 
490 		memset(b, 0, sizeof(b));
491 		for (tmp = 0, i = 0; i < size; i++) {
492 			memcpy(b, ptr + (i * 2) + 2, 2);
493 			tmp += simple_strtol(b, NULL, 16);
494 		}
495 
496 		if (((tmp + fcs) & 0xff) != 0xff) {
497 			BT_ERR("Checksum error in firmware");
498 			err = -EILSEQ;
499 			goto error;
500 		}
501 
502 		if (ptr[1] == '3') {
503 			bt3c_address(iobase, addr);
504 
505 			memset(b, 0, sizeof(b));
506 			for (i = 0; i < (size - 4) / 2; i++) {
507 				memcpy(b, ptr + (i * 4) + 12, 4);
508 				tmp = simple_strtoul(b, NULL, 16);
509 				bt3c_put(iobase, tmp);
510 			}
511 		}
512 
513 		ptr   += (size * 2) + 6;
514 		count -= (size * 2) + 6;
515 	}
516 
517 	udelay(17);
518 
519 	/* Boot */
520 	bt3c_address(iobase, 0x3000);
521 	outb(inb(iobase + CONTROL) | 0x40, iobase + CONTROL);
522 
523 error:
524 	udelay(17);
525 
526 	/* Clear */
527 	bt3c_io_write(iobase, 0x7006, 0x0000);
528 	bt3c_io_write(iobase, 0x7005, 0x0000);
529 	bt3c_io_write(iobase, 0x7001, 0x0000);
530 
531 	return err;
532 }
533 
534 
535 static int bt3c_open(struct bt3c_info *info)
536 {
537 	const struct firmware *firmware;
538 	struct hci_dev *hdev;
539 	int err;
540 
541 	spin_lock_init(&(info->lock));
542 
543 	skb_queue_head_init(&(info->txq));
544 
545 	info->rx_state = RECV_WAIT_PACKET_TYPE;
546 	info->rx_count = 0;
547 	info->rx_skb = NULL;
548 
549 	/* Initialize HCI device */
550 	hdev = hci_alloc_dev();
551 	if (!hdev) {
552 		BT_ERR("Can't allocate HCI device");
553 		return -ENOMEM;
554 	}
555 
556 	info->hdev = hdev;
557 
558 	hdev->bus = HCI_PCCARD;
559 	hci_set_drvdata(hdev, info);
560 	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
561 
562 	hdev->open  = bt3c_hci_open;
563 	hdev->close = bt3c_hci_close;
564 	hdev->flush = bt3c_hci_flush;
565 	hdev->send  = bt3c_hci_send_frame;
566 
567 	/* Load firmware */
568 	err = request_firmware(&firmware, "BT3CPCC.bin", &info->p_dev->dev);
569 	if (err < 0) {
570 		BT_ERR("Firmware request failed");
571 		goto error;
572 	}
573 
574 	err = bt3c_load_firmware(info, firmware->data, firmware->size);
575 
576 	release_firmware(firmware);
577 
578 	if (err < 0) {
579 		BT_ERR("Firmware loading failed");
580 		goto error;
581 	}
582 
583 	/* Timeout before it is safe to send the first HCI packet */
584 	msleep(1000);
585 
586 	/* Register HCI device */
587 	err = hci_register_dev(hdev);
588 	if (err < 0) {
589 		BT_ERR("Can't register HCI device");
590 		goto error;
591 	}
592 
593 	return 0;
594 
595 error:
596 	info->hdev = NULL;
597 	hci_free_dev(hdev);
598 	return err;
599 }
600 
601 
602 static int bt3c_close(struct bt3c_info *info)
603 {
604 	struct hci_dev *hdev = info->hdev;
605 
606 	if (!hdev)
607 		return -ENODEV;
608 
609 	bt3c_hci_close(hdev);
610 
611 	hci_unregister_dev(hdev);
612 	hci_free_dev(hdev);
613 
614 	return 0;
615 }
616 
617 static int bt3c_probe(struct pcmcia_device *link)
618 {
619 	struct bt3c_info *info;
620 
621 	/* Create new info device */
622 	info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL);
623 	if (!info)
624 		return -ENOMEM;
625 
626 	info->p_dev = link;
627 	link->priv = info;
628 
629 	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
630 		CONF_AUTO_SET_IO;
631 
632 	return bt3c_config(link);
633 }
634 
635 
636 static void bt3c_detach(struct pcmcia_device *link)
637 {
638 	bt3c_release(link);
639 }
640 
641 static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data)
642 {
643 	int *try = priv_data;
644 
645 	if (!try)
646 		p_dev->io_lines = 16;
647 
648 	if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0))
649 		return -EINVAL;
650 
651 	p_dev->resource[0]->end = 8;
652 	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
653 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
654 
655 	return pcmcia_request_io(p_dev);
656 }
657 
658 static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
659 				      void *priv_data)
660 {
661 	static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
662 	int j;
663 
664 	if (p_dev->io_lines > 3)
665 		return -ENODEV;
666 
667 	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
668 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
669 	p_dev->resource[0]->end = 8;
670 
671 	for (j = 0; j < 5; j++) {
672 		p_dev->resource[0]->start = base[j];
673 		p_dev->io_lines = base[j] ? 16 : 3;
674 		if (!pcmcia_request_io(p_dev))
675 			return 0;
676 	}
677 	return -ENODEV;
678 }
679 
680 static int bt3c_config(struct pcmcia_device *link)
681 {
682 	struct bt3c_info *info = link->priv;
683 	int i;
684 	unsigned long try;
685 
686 	/* First pass: look for a config entry that looks normal.
687 	   Two tries: without IO aliases, then with aliases */
688 	for (try = 0; try < 2; try++)
689 		if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
690 			goto found_port;
691 
692 	/* Second pass: try to find an entry that isn't picky about
693 	   its base address, then try to grab any standard serial port
694 	   address, and finally try to get any free port. */
695 	if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
696 		goto found_port;
697 
698 	BT_ERR("No usable port range found");
699 	goto failed;
700 
701 found_port:
702 	i = pcmcia_request_irq(link, &bt3c_interrupt);
703 	if (i != 0)
704 		goto failed;
705 
706 	i = pcmcia_enable_device(link);
707 	if (i != 0)
708 		goto failed;
709 
710 	if (bt3c_open(info) != 0)
711 		goto failed;
712 
713 	return 0;
714 
715 failed:
716 	bt3c_release(link);
717 	return -ENODEV;
718 }
719 
720 
721 static void bt3c_release(struct pcmcia_device *link)
722 {
723 	struct bt3c_info *info = link->priv;
724 
725 	bt3c_close(info);
726 
727 	pcmcia_disable_device(link);
728 }
729 
730 
731 static const struct pcmcia_device_id bt3c_ids[] = {
732 	PCMCIA_DEVICE_PROD_ID13("3COM", "Bluetooth PC Card", 0xefce0a31, 0xd4ce9b02),
733 	PCMCIA_DEVICE_NULL
734 };
735 MODULE_DEVICE_TABLE(pcmcia, bt3c_ids);
736 
737 static struct pcmcia_driver bt3c_driver = {
738 	.owner		= THIS_MODULE,
739 	.name		= "bt3c_cs",
740 	.probe		= bt3c_probe,
741 	.remove		= bt3c_detach,
742 	.id_table	= bt3c_ids,
743 };
744 module_pcmcia_driver(bt3c_driver);
745