1 2menu "Bluetooth device drivers" 3 depends on BT 4 5config BT_HCIBTUSB 6 tristate "HCI USB driver" 7 depends on USB 8 help 9 Bluetooth HCI USB driver. 10 This driver is required if you want to use Bluetooth devices with 11 USB interface. 12 13 Say Y here to compile support for Bluetooth USB devices into the 14 kernel or say M to compile it as module (btusb). 15 16config BT_HCIBTSDIO 17 tristate "HCI SDIO driver" 18 depends on MMC 19 help 20 Bluetooth HCI SDIO driver. 21 This driver is required if you want to use Bluetooth device with 22 SDIO interface. 23 24 Say Y here to compile support for Bluetooth SDIO devices into the 25 kernel or say M to compile it as module (btsdio). 26 27config BT_HCIUART 28 tristate "HCI UART driver" 29 depends on TTY 30 help 31 Bluetooth HCI UART driver. 32 This driver is required if you want to use Bluetooth devices with 33 serial port interface. You will also need this driver if you have 34 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card 35 adapter and BrainBoxes Bluetooth PC Card. 36 37 Say Y here to compile support for Bluetooth UART devices into the 38 kernel or say M to compile it as module (hci_uart). 39 40config BT_HCIUART_H4 41 bool "UART (H4) protocol support" 42 depends on BT_HCIUART 43 help 44 UART (H4) is serial protocol for communication between Bluetooth 45 device and host. This protocol is required for most Bluetooth devices 46 with UART interface, including PCMCIA and CF cards. 47 48 Say Y here to compile support for HCI UART (H4) protocol. 49 50config BT_HCIUART_BCSP 51 bool "BCSP protocol support" 52 depends on BT_HCIUART 53 select BITREVERSE 54 help 55 BCSP (BlueCore Serial Protocol) is serial protocol for communication 56 between Bluetooth device and host. This protocol is required for non 57 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and 58 CF cards. 59 60 Say Y here to compile support for HCI BCSP protocol. 61 62config BT_HCIUART_ATH3K 63 bool "Atheros AR300x serial support" 64 depends on BT_HCIUART 65 help 66 HCIATH3K (HCI Atheros AR300x) is a serial protocol for 67 communication between host and Atheros AR300x Bluetooth devices. 68 This protocol enables AR300x chips to be enabled with 69 power management support. 70 Enable this if you have Atheros AR300x serial Bluetooth device. 71 72 Say Y here to compile support for HCI UART ATH3K protocol. 73 74config BT_HCIUART_LL 75 bool "HCILL protocol support" 76 depends on BT_HCIUART 77 help 78 HCILL (HCI Low Level) is a serial protocol for communication 79 between Bluetooth device and host. This protocol is required for 80 serial Bluetooth devices that are based on Texas Instruments' 81 BRF chips. 82 83 Say Y here to compile support for HCILL protocol. 84 85config BT_HCIUART_3WIRE 86 bool "Three-wire UART (H5) protocol support" 87 depends on BT_HCIUART 88 help 89 The HCI Three-wire UART Transport Layer makes it possible to 90 user the Bluetooth HCI over a serial port interface. The HCI 91 Three-wire UART Transport Layer assumes that the UART 92 communication may have bit errors, overrun errors or burst 93 errors and thereby making CTS/RTS lines unnecessary. 94 95 Say Y here to compile support for Three-wire UART protocol. 96 97config BT_HCIBCM203X 98 tristate "HCI BCM203x USB driver" 99 depends on USB 100 select FW_LOADER 101 help 102 Bluetooth HCI BCM203x USB driver. 103 This driver provides the firmware loading mechanism for the Broadcom 104 Blutonium based devices. 105 106 Say Y here to compile support for HCI BCM203x devices into the 107 kernel or say M to compile it as module (bcm203x). 108 109config BT_HCIBPA10X 110 tristate "HCI BPA10x USB driver" 111 depends on USB 112 help 113 Bluetooth HCI BPA10x USB driver. 114 This driver provides support for the Digianswer BPA 100/105 Bluetooth 115 sniffer devices. 116 117 Say Y here to compile support for HCI BPA10x devices into the 118 kernel or say M to compile it as module (bpa10x). 119 120config BT_HCIBFUSB 121 tristate "HCI BlueFRITZ! USB driver" 122 depends on USB 123 select FW_LOADER 124 help 125 Bluetooth HCI BlueFRITZ! USB driver. 126 This driver provides support for Bluetooth USB devices with AVM 127 interface: 128 AVM BlueFRITZ! USB 129 130 Say Y here to compile support for HCI BFUSB devices into the 131 kernel or say M to compile it as module (bfusb). 132 133config BT_HCIDTL1 134 tristate "HCI DTL1 (PC Card) driver" 135 depends on PCMCIA 136 help 137 Bluetooth HCI DTL1 (PC Card) driver. 138 This driver provides support for Bluetooth PCMCIA devices with 139 Nokia DTL1 interface: 140 Nokia Bluetooth Card 141 Socket Bluetooth CF Card 142 143 Say Y here to compile support for HCI DTL1 devices into the 144 kernel or say M to compile it as module (dtl1_cs). 145 146config BT_HCIBT3C 147 tristate "HCI BT3C (PC Card) driver" 148 depends on PCMCIA 149 select FW_LOADER 150 help 151 Bluetooth HCI BT3C (PC Card) driver. 152 This driver provides support for Bluetooth PCMCIA devices with 153 3Com BT3C interface: 154 3Com Bluetooth Card (3CRWB6096) 155 HP Bluetooth Card 156 157 Say Y here to compile support for HCI BT3C devices into the 158 kernel or say M to compile it as module (bt3c_cs). 159 160config BT_HCIBLUECARD 161 tristate "HCI BlueCard (PC Card) driver" 162 depends on PCMCIA 163 help 164 Bluetooth HCI BlueCard (PC Card) driver. 165 This driver provides support for Bluetooth PCMCIA devices with 166 Anycom BlueCard interface: 167 Anycom Bluetooth PC Card 168 Anycom Bluetooth CF Card 169 170 Say Y here to compile support for HCI BlueCard devices into the 171 kernel or say M to compile it as module (bluecard_cs). 172 173config BT_HCIBTUART 174 tristate "HCI UART (PC Card) device driver" 175 depends on PCMCIA 176 help 177 Bluetooth HCI UART (PC Card) driver. 178 This driver provides support for Bluetooth PCMCIA devices with 179 an UART interface: 180 Xircom CreditCard Bluetooth Adapter 181 Xircom RealPort2 Bluetooth Adapter 182 Sphinx PICO Card 183 H-Soft blue+Card 184 Cyber-blue Compact Flash Card 185 186 Say Y here to compile support for HCI UART devices into the 187 kernel or say M to compile it as module (btuart_cs). 188 189config BT_HCIVHCI 190 tristate "HCI VHCI (Virtual HCI device) driver" 191 help 192 Bluetooth Virtual HCI device driver. 193 This driver is required if you want to use HCI Emulation software. 194 195 Say Y here to compile support for virtual HCI devices into the 196 kernel or say M to compile it as module (hci_vhci). 197 198config BT_MRVL 199 tristate "Marvell Bluetooth driver support" 200 help 201 The core driver to support Marvell Bluetooth devices. 202 203 This driver is required if you want to support 204 Marvell Bluetooth devices, such as 8688/8787/8797/8897. 205 206 Say Y here to compile Marvell Bluetooth driver 207 into the kernel or say M to compile it as module. 208 209config BT_MRVL_SDIO 210 tristate "Marvell BT-over-SDIO driver" 211 depends on BT_MRVL && MMC 212 select FW_LOADER 213 help 214 The driver for Marvell Bluetooth chipsets with SDIO interface. 215 216 This driver is required if you want to use Marvell Bluetooth 217 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897 218 chipsets are supported. 219 220 Say Y here to compile support for Marvell BT-over-SDIO driver 221 into the kernel or say M to compile it as module. 222 223config BT_ATH3K 224 tristate "Atheros firmware download driver" 225 depends on BT_HCIBTUSB 226 select FW_LOADER 227 help 228 Bluetooth firmware download driver. 229 This driver loads the firmware into the Atheros Bluetooth 230 chipset. 231 232 Say Y here to compile support for "Atheros firmware download driver" 233 into the kernel or say M to compile it as module (ath3k). 234 235config BT_WILINK 236 tristate "Texas Instruments WiLink7 driver" 237 depends on TI_ST 238 help 239 This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS 240 combo devices. This makes use of shared transport line discipline 241 core driver to communicate with the BT core of the combo chip. 242 243 Say Y here to compile support for Texas Instrument's WiLink7 driver 244 into the kernel or say M to compile it as module. 245endmenu 246