1 /* 2 * mtip32xx.h - Header file for the P320 SSD Block Driver 3 * Copyright (C) 2011 Micron Technology, Inc. 4 * 5 * Portions of this code were derived from works subjected to the 6 * following copyright: 7 * Copyright (C) 2009 Integrated Device Technology, Inc. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 */ 20 21 #ifndef __MTIP32XX_H__ 22 #define __MTIP32XX_H__ 23 24 #include <linux/spinlock.h> 25 #include <linux/rwsem.h> 26 #include <linux/ata.h> 27 #include <linux/interrupt.h> 28 #include <linux/genhd.h> 29 30 /* Offset of Subsystem Device ID in pci confoguration space */ 31 #define PCI_SUBSYSTEM_DEVICEID 0x2E 32 33 /* offset of Device Control register in PCIe extended capabilites space */ 34 #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48 35 36 /* check for erase mode support during secure erase */ 37 #define MTIP_SEC_ERASE_MODE 0x2 38 39 /* # of times to retry timed out/failed IOs */ 40 #define MTIP_MAX_RETRIES 2 41 42 /* Various timeout values in ms */ 43 #define MTIP_NCQ_CMD_TIMEOUT_MS 15000 44 #define MTIP_IOCTL_CMD_TIMEOUT_MS 5000 45 #define MTIP_INT_CMD_TIMEOUT_MS 5000 46 #define MTIP_QUIESCE_IO_TIMEOUT_MS (MTIP_NCQ_CMD_TIMEOUT_MS * \ 47 (MTIP_MAX_RETRIES + 1)) 48 49 /* check for timeouts every 500ms */ 50 #define MTIP_TIMEOUT_CHECK_PERIOD 500 51 52 /* ftl rebuild */ 53 #define MTIP_FTL_REBUILD_OFFSET 142 54 #define MTIP_FTL_REBUILD_MAGIC 0xED51 55 #define MTIP_FTL_REBUILD_TIMEOUT_MS 2400000 56 57 /* unaligned IO handling */ 58 #define MTIP_MAX_UNALIGNED_SLOTS 2 59 60 /* Macro to extract the tag bit number from a tag value. */ 61 #define MTIP_TAG_BIT(tag) (tag & 0x1F) 62 63 /* 64 * Macro to extract the tag index from a tag value. The index 65 * is used to access the correct s_active/Command Issue register based 66 * on the tag value. 67 */ 68 #define MTIP_TAG_INDEX(tag) (tag >> 5) 69 70 /* 71 * Maximum number of scatter gather entries 72 * a single command may have. 73 */ 74 #define MTIP_MAX_SG 504 75 76 /* 77 * Maximum number of slot groups (Command Issue & s_active registers) 78 * NOTE: This is the driver maximum; check dd->slot_groups for actual value. 79 */ 80 #define MTIP_MAX_SLOT_GROUPS 8 81 82 /* Internal command tag. */ 83 #define MTIP_TAG_INTERNAL 0 84 85 /* Micron Vendor ID & P320x SSD Device ID */ 86 #define PCI_VENDOR_ID_MICRON 0x1344 87 #define P320H_DEVICE_ID 0x5150 88 #define P320M_DEVICE_ID 0x5151 89 #define P320S_DEVICE_ID 0x5152 90 #define P325M_DEVICE_ID 0x5153 91 #define P420H_DEVICE_ID 0x5160 92 #define P420M_DEVICE_ID 0x5161 93 #define P425M_DEVICE_ID 0x5163 94 95 /* Driver name and version strings */ 96 #define MTIP_DRV_NAME "mtip32xx" 97 #define MTIP_DRV_VERSION "1.3.1" 98 99 /* Maximum number of minor device numbers per device. */ 100 #define MTIP_MAX_MINORS 16 101 102 /* Maximum number of supported command slots. */ 103 #define MTIP_MAX_COMMAND_SLOTS (MTIP_MAX_SLOT_GROUPS * 32) 104 105 /* 106 * Per-tag bitfield size in longs. 107 * Linux bit manipulation functions 108 * (i.e. test_and_set_bit, find_next_zero_bit) 109 * manipulate memory in longs, so we try to make the math work. 110 * take the slot groups and find the number of longs, rounding up. 111 * Careful! i386 and x86_64 use different size longs! 112 */ 113 #define U32_PER_LONG (sizeof(long) / sizeof(u32)) 114 #define SLOTBITS_IN_LONGS ((MTIP_MAX_SLOT_GROUPS + \ 115 (U32_PER_LONG-1))/U32_PER_LONG) 116 117 /* BAR number used to access the HBA registers. */ 118 #define MTIP_ABAR 5 119 120 #ifdef DEBUG 121 #define dbg_printk(format, arg...) \ 122 printk(pr_fmt(format), ##arg); 123 #else 124 #define dbg_printk(format, arg...) 125 #endif 126 127 #define MTIP_DFS_MAX_BUF_SIZE 1024 128 129 #define __force_bit2int (unsigned int __force) 130 131 enum { 132 /* below are bit numbers in 'flags' defined in mtip_port */ 133 MTIP_PF_IC_ACTIVE_BIT = 0, /* pio/ioctl */ 134 MTIP_PF_EH_ACTIVE_BIT = 1, /* error handling */ 135 MTIP_PF_SE_ACTIVE_BIT = 2, /* secure erase */ 136 MTIP_PF_DM_ACTIVE_BIT = 3, /* download microcde */ 137 MTIP_PF_TO_ACTIVE_BIT = 9, /* timeout handling */ 138 MTIP_PF_PAUSE_IO = ((1 << MTIP_PF_IC_ACTIVE_BIT) | 139 (1 << MTIP_PF_EH_ACTIVE_BIT) | 140 (1 << MTIP_PF_SE_ACTIVE_BIT) | 141 (1 << MTIP_PF_DM_ACTIVE_BIT) | 142 (1 << MTIP_PF_TO_ACTIVE_BIT)), 143 144 MTIP_PF_SVC_THD_ACTIVE_BIT = 4, 145 MTIP_PF_ISSUE_CMDS_BIT = 5, 146 MTIP_PF_REBUILD_BIT = 6, 147 MTIP_PF_SVC_THD_STOP_BIT = 8, 148 149 MTIP_PF_SVC_THD_WORK = ((1 << MTIP_PF_EH_ACTIVE_BIT) | 150 (1 << MTIP_PF_ISSUE_CMDS_BIT) | 151 (1 << MTIP_PF_REBUILD_BIT) | 152 (1 << MTIP_PF_SVC_THD_STOP_BIT) | 153 (1 << MTIP_PF_TO_ACTIVE_BIT)), 154 155 /* below are bit numbers in 'dd_flag' defined in driver_data */ 156 MTIP_DDF_SEC_LOCK_BIT = 0, 157 MTIP_DDF_REMOVE_PENDING_BIT = 1, 158 MTIP_DDF_OVER_TEMP_BIT = 2, 159 MTIP_DDF_WRITE_PROTECT_BIT = 3, 160 MTIP_DDF_CLEANUP_BIT = 5, 161 MTIP_DDF_RESUME_BIT = 6, 162 MTIP_DDF_INIT_DONE_BIT = 7, 163 MTIP_DDF_REBUILD_FAILED_BIT = 8, 164 MTIP_DDF_REMOVAL_BIT = 9, 165 166 MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | 167 (1 << MTIP_DDF_SEC_LOCK_BIT) | 168 (1 << MTIP_DDF_OVER_TEMP_BIT) | 169 (1 << MTIP_DDF_WRITE_PROTECT_BIT) | 170 (1 << MTIP_DDF_REBUILD_FAILED_BIT)), 171 172 }; 173 174 struct smart_attr { 175 u8 attr_id; 176 u16 flags; 177 u8 cur; 178 u8 worst; 179 u32 data; 180 u8 res[3]; 181 } __packed; 182 183 struct mtip_work { 184 struct work_struct work; 185 void *port; 186 int cpu_binding; 187 u32 completed; 188 } ____cacheline_aligned_in_smp; 189 190 #define DEFINE_HANDLER(group) \ 191 void mtip_workq_sdbf##group(struct work_struct *work) \ 192 { \ 193 struct mtip_work *w = (struct mtip_work *) work; \ 194 mtip_workq_sdbfx(w->port, group, w->completed); \ 195 } 196 197 #define MTIP_TRIM_TIMEOUT_MS 240000 198 #define MTIP_MAX_TRIM_ENTRIES 8 199 #define MTIP_MAX_TRIM_ENTRY_LEN 0xfff8 200 201 struct mtip_trim_entry { 202 u32 lba; /* starting lba of region */ 203 u16 rsvd; /* unused */ 204 u16 range; /* # of 512b blocks to trim */ 205 } __packed; 206 207 struct mtip_trim { 208 /* Array of regions to trim */ 209 struct mtip_trim_entry entry[MTIP_MAX_TRIM_ENTRIES]; 210 } __packed; 211 212 /* Register Frame Information Structure (FIS), host to device. */ 213 struct host_to_dev_fis { 214 /* 215 * FIS type. 216 * - 27h Register FIS, host to device. 217 * - 34h Register FIS, device to host. 218 * - 39h DMA Activate FIS, device to host. 219 * - 41h DMA Setup FIS, bi-directional. 220 * - 46h Data FIS, bi-directional. 221 * - 58h BIST Activate FIS, bi-directional. 222 * - 5Fh PIO Setup FIS, device to host. 223 * - A1h Set Device Bits FIS, device to host. 224 */ 225 unsigned char type; 226 unsigned char opts; 227 unsigned char command; 228 unsigned char features; 229 230 union { 231 unsigned char lba_low; 232 unsigned char sector; 233 }; 234 union { 235 unsigned char lba_mid; 236 unsigned char cyl_low; 237 }; 238 union { 239 unsigned char lba_hi; 240 unsigned char cyl_hi; 241 }; 242 union { 243 unsigned char device; 244 unsigned char head; 245 }; 246 247 union { 248 unsigned char lba_low_ex; 249 unsigned char sector_ex; 250 }; 251 union { 252 unsigned char lba_mid_ex; 253 unsigned char cyl_low_ex; 254 }; 255 union { 256 unsigned char lba_hi_ex; 257 unsigned char cyl_hi_ex; 258 }; 259 unsigned char features_ex; 260 261 unsigned char sect_count; 262 unsigned char sect_cnt_ex; 263 unsigned char res2; 264 unsigned char control; 265 266 unsigned int res3; 267 }; 268 269 /* Command header structure. */ 270 struct mtip_cmd_hdr { 271 /* 272 * Command options. 273 * - Bits 31:16 Number of PRD entries. 274 * - Bits 15:8 Unused in this implementation. 275 * - Bit 7 Prefetch bit, informs the drive to prefetch PRD entries. 276 * - Bit 6 Write bit, should be set when writing data to the device. 277 * - Bit 5 Unused in this implementation. 278 * - Bits 4:0 Length of the command FIS in DWords (DWord = 4 bytes). 279 */ 280 unsigned int opts; 281 /* This field is unsed when using NCQ. */ 282 union { 283 unsigned int byte_count; 284 unsigned int status; 285 }; 286 /* 287 * Lower 32 bits of the command table address associated with this 288 * header. The command table addresses must be 128 byte aligned. 289 */ 290 unsigned int ctba; 291 /* 292 * If 64 bit addressing is used this field is the upper 32 bits 293 * of the command table address associated with this command. 294 */ 295 unsigned int ctbau; 296 /* Reserved and unused. */ 297 unsigned int res[4]; 298 }; 299 300 /* Command scatter gather structure (PRD). */ 301 struct mtip_cmd_sg { 302 /* 303 * Low 32 bits of the data buffer address. For P320 this 304 * address must be 8 byte aligned signified by bits 2:0 being 305 * set to 0. 306 */ 307 unsigned int dba; 308 /* 309 * When 64 bit addressing is used this field is the upper 310 * 32 bits of the data buffer address. 311 */ 312 unsigned int dba_upper; 313 /* Unused. */ 314 unsigned int reserved; 315 /* 316 * Bit 31: interrupt when this data block has been transferred. 317 * Bits 30..22: reserved 318 * Bits 21..0: byte count (minus 1). For P320 the byte count must be 319 * 8 byte aligned signified by bits 2:0 being set to 1. 320 */ 321 unsigned int info; 322 }; 323 struct mtip_port; 324 325 /* Structure used to describe a command. */ 326 struct mtip_cmd { 327 328 struct mtip_cmd_hdr *command_header; /* ptr to command header entry */ 329 330 dma_addr_t command_header_dma; /* corresponding physical address */ 331 332 void *command; /* ptr to command table entry */ 333 334 dma_addr_t command_dma; /* corresponding physical address */ 335 336 void *comp_data; /* data passed to completion function comp_func() */ 337 /* 338 * Completion function called by the ISR upon completion of 339 * a command. 340 */ 341 void (*comp_func)(struct mtip_port *port, 342 int tag, 343 struct mtip_cmd *cmd, 344 int status); 345 346 int scatter_ents; /* Number of scatter list entries used */ 347 348 int unaligned; /* command is unaligned on 4k boundary */ 349 350 struct scatterlist sg[MTIP_MAX_SG]; /* Scatter list entries */ 351 352 int retries; /* The number of retries left for this command. */ 353 354 int direction; /* Data transfer direction */ 355 }; 356 357 /* Structure used to describe a port. */ 358 struct mtip_port { 359 /* Pointer back to the driver data for this port. */ 360 struct driver_data *dd; 361 /* 362 * Used to determine if the data pointed to by the 363 * identify field is valid. 364 */ 365 unsigned long identify_valid; 366 /* Base address of the memory mapped IO for the port. */ 367 void __iomem *mmio; 368 /* Array of pointers to the memory mapped s_active registers. */ 369 void __iomem *s_active[MTIP_MAX_SLOT_GROUPS]; 370 /* Array of pointers to the memory mapped completed registers. */ 371 void __iomem *completed[MTIP_MAX_SLOT_GROUPS]; 372 /* Array of pointers to the memory mapped Command Issue registers. */ 373 void __iomem *cmd_issue[MTIP_MAX_SLOT_GROUPS]; 374 /* 375 * Pointer to the beginning of the command header memory as used 376 * by the driver. 377 */ 378 void *command_list; 379 /* 380 * Pointer to the beginning of the command header memory as used 381 * by the DMA. 382 */ 383 dma_addr_t command_list_dma; 384 /* 385 * Pointer to the beginning of the RX FIS memory as used 386 * by the driver. 387 */ 388 void *rxfis; 389 /* 390 * Pointer to the beginning of the RX FIS memory as used 391 * by the DMA. 392 */ 393 dma_addr_t rxfis_dma; 394 /* 395 * Pointer to the DMA region for RX Fis, Identify, RLE10, and SMART 396 */ 397 void *block1; 398 /* 399 * DMA address of region for RX Fis, Identify, RLE10, and SMART 400 */ 401 dma_addr_t block1_dma; 402 /* 403 * Pointer to the beginning of the identify data memory as used 404 * by the driver. 405 */ 406 u16 *identify; 407 /* 408 * Pointer to the beginning of the identify data memory as used 409 * by the DMA. 410 */ 411 dma_addr_t identify_dma; 412 /* 413 * Pointer to the beginning of a sector buffer that is used 414 * by the driver when issuing internal commands. 415 */ 416 u16 *sector_buffer; 417 /* 418 * Pointer to the beginning of a sector buffer that is used 419 * by the DMA when the driver issues internal commands. 420 */ 421 dma_addr_t sector_buffer_dma; 422 423 u16 *log_buf; 424 dma_addr_t log_buf_dma; 425 426 u8 *smart_buf; 427 dma_addr_t smart_buf_dma; 428 429 /* 430 * used to queue commands when an internal command is in progress 431 * or error handling is active 432 */ 433 unsigned long cmds_to_issue[SLOTBITS_IN_LONGS]; 434 /* Used by mtip_service_thread to wait for an event */ 435 wait_queue_head_t svc_wait; 436 /* 437 * indicates the state of the port. Also, helps the service thread 438 * to determine its action on wake up. 439 */ 440 unsigned long flags; 441 /* 442 * Timer used to complete commands that have been active for too long. 443 */ 444 unsigned long ic_pause_timer; 445 446 /* Semaphore to control queue depth of unaligned IOs */ 447 struct semaphore cmd_slot_unal; 448 449 /* Spinlock for working around command-issue bug. */ 450 spinlock_t cmd_issue_lock[MTIP_MAX_SLOT_GROUPS]; 451 }; 452 453 /* 454 * Driver private data structure. 455 * 456 * One structure is allocated per probed device. 457 */ 458 struct driver_data { 459 void __iomem *mmio; /* Base address of the HBA registers. */ 460 461 int major; /* Major device number. */ 462 463 int instance; /* Instance number. First device probed is 0, ... */ 464 465 struct gendisk *disk; /* Pointer to our gendisk structure. */ 466 467 struct pci_dev *pdev; /* Pointer to the PCI device structure. */ 468 469 struct request_queue *queue; /* Our request queue. */ 470 471 struct blk_mq_tag_set tags; /* blk_mq tags */ 472 473 struct mtip_port *port; /* Pointer to the port data structure. */ 474 475 unsigned product_type; /* magic value declaring the product type */ 476 477 unsigned slot_groups; /* number of slot groups the product supports */ 478 479 unsigned long index; /* Index to determine the disk name */ 480 481 unsigned long dd_flag; /* NOTE: use atomic bit operations on this */ 482 483 struct task_struct *mtip_svc_handler; /* task_struct of svc thd */ 484 485 struct dentry *dfs_node; 486 487 bool trim_supp; /* flag indicating trim support */ 488 489 bool sr; 490 491 int numa_node; /* NUMA support */ 492 493 char workq_name[32]; 494 495 struct workqueue_struct *isr_workq; 496 497 atomic_t irq_workers_active; 498 499 struct mtip_work work[MTIP_MAX_SLOT_GROUPS]; 500 501 int isr_binding; 502 503 struct block_device *bdev; 504 505 struct list_head online_list; /* linkage for online list */ 506 507 struct list_head remove_list; /* linkage for removing list */ 508 509 int unal_qdepth; /* qdepth of unaligned IO queue */ 510 }; 511 512 #endif 513