1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * linux/drivers/block/floppy.c 4 * 5 * Copyright (C) 1991, 1992 Linus Torvalds 6 * Copyright (C) 1993, 1994 Alain Knaff 7 * Copyright (C) 1998 Alan Cox 8 */ 9 10 /* 11 * 02.12.91 - Changed to static variables to indicate need for reset 12 * and recalibrate. This makes some things easier (output_byte reset 13 * checking etc), and means less interrupt jumping in case of errors, 14 * so the code is hopefully easier to understand. 15 */ 16 17 /* 18 * This file is certainly a mess. I've tried my best to get it working, 19 * but I don't like programming floppies, and I have only one anyway. 20 * Urgel. I should check for more errors, and do more graceful error 21 * recovery. Seems there are problems with several drives. I've tried to 22 * correct them. No promises. 23 */ 24 25 /* 26 * As with hd.c, all routines within this file can (and will) be called 27 * by interrupts, so extreme caution is needed. A hardware interrupt 28 * handler may not sleep, or a kernel panic will happen. Thus I cannot 29 * call "floppy-on" directly, but have to set a special timer interrupt 30 * etc. 31 */ 32 33 /* 34 * 28.02.92 - made track-buffering routines, based on the routines written 35 * by entropy@wintermute.wpi.edu (Lawrence Foard). Linus. 36 */ 37 38 /* 39 * Automatic floppy-detection and formatting written by Werner Almesberger 40 * (almesber@nessie.cs.id.ethz.ch), who also corrected some problems with 41 * the floppy-change signal detection. 42 */ 43 44 /* 45 * 1992/7/22 -- Hennus Bergman: Added better error reporting, fixed 46 * FDC data overrun bug, added some preliminary stuff for vertical 47 * recording support. 48 * 49 * 1992/9/17: Added DMA allocation & DMA functions. -- hhb. 50 * 51 * TODO: Errors are still not counted properly. 52 */ 53 54 /* 1992/9/20 55 * Modifications for ``Sector Shifting'' by Rob Hooft (hooft@chem.ruu.nl) 56 * modeled after the freeware MS-DOS program fdformat/88 V1.8 by 57 * Christoph H. Hochst\"atter. 58 * I have fixed the shift values to the ones I always use. Maybe a new 59 * ioctl() should be created to be able to modify them. 60 * There is a bug in the driver that makes it impossible to format a 61 * floppy as the first thing after bootup. 62 */ 63 64 /* 65 * 1993/4/29 -- Linus -- cleaned up the timer handling in the kernel, and 66 * this helped the floppy driver as well. Much cleaner, and still seems to 67 * work. 68 */ 69 70 /* 1994/6/24 --bbroad-- added the floppy table entries and made 71 * minor modifications to allow 2.88 floppies to be run. 72 */ 73 74 /* 1994/7/13 -- Paul Vojta -- modified the probing code to allow three or more 75 * disk types. 76 */ 77 78 /* 79 * 1994/8/8 -- Alain Knaff -- Switched to fdpatch driver: Support for bigger 80 * format bug fixes, but unfortunately some new bugs too... 81 */ 82 83 /* 1994/9/17 -- Koen Holtman -- added logging of physical floppy write 84 * errors to allow safe writing by specialized programs. 85 */ 86 87 /* 1995/4/24 -- Dan Fandrich -- added support for Commodore 1581 3.5" disks 88 * by defining bit 1 of the "stretch" parameter to mean put sectors on the 89 * opposite side of the disk, leaving the sector IDs alone (i.e. Commodore's 90 * drives are "upside-down"). 91 */ 92 93 /* 94 * 1995/8/26 -- Andreas Busse -- added Mips support. 95 */ 96 97 /* 98 * 1995/10/18 -- Ralf Baechle -- Portability cleanup; move machine dependent 99 * features to asm/floppy.h. 100 */ 101 102 /* 103 * 1998/1/21 -- Richard Gooch <rgooch@atnf.csiro.au> -- devfs support 104 */ 105 106 /* 107 * 1998/05/07 -- Russell King -- More portability cleanups; moved definition of 108 * interrupt and dma channel to asm/floppy.h. Cleaned up some formatting & 109 * use of '0' for NULL. 110 */ 111 112 /* 113 * 1998/06/07 -- Alan Cox -- Merged the 2.0.34 fixes for resource allocation 114 * failures. 115 */ 116 117 /* 118 * 1998/09/20 -- David Weinehall -- Added slow-down code for buggy PS/2-drives. 119 */ 120 121 /* 122 * 1999/08/13 -- Paul Slootman -- floppy stopped working on Alpha after 24 123 * days, 6 hours, 32 minutes and 32 seconds (i.e. MAXINT jiffies; ints were 124 * being used to store jiffies, which are unsigned longs). 125 */ 126 127 /* 128 * 2000/08/28 -- Arnaldo Carvalho de Melo <acme@conectiva.com.br> 129 * - get rid of check_region 130 * - s/suser/capable/ 131 */ 132 133 /* 134 * 2001/08/26 -- Paul Gortmaker - fix insmod oops on machines with no 135 * floppy controller (lingering task on list after module is gone... boom.) 136 */ 137 138 /* 139 * 2002/02/07 -- Anton Altaparmakov - Fix io ports reservation to correct range 140 * (0x3f2-0x3f5, 0x3f7). This fix is a bit of a hack but the proper fix 141 * requires many non-obvious changes in arch dependent code. 142 */ 143 144 /* 2003/07/28 -- Daniele Bellucci <bellucda@tiscali.it>. 145 * Better audit of register_blkdev. 146 */ 147 148 #define REALLY_SLOW_IO 149 150 #define DEBUGT 2 151 152 #define DPRINT(format, args...) \ 153 pr_info("floppy%d: " format, current_drive, ##args) 154 155 #define DCL_DEBUG /* debug disk change line */ 156 #ifdef DCL_DEBUG 157 #define debug_dcl(test, fmt, args...) \ 158 do { if ((test) & FD_DEBUG) DPRINT(fmt, ##args); } while (0) 159 #else 160 #define debug_dcl(test, fmt, args...) \ 161 do { if (0) DPRINT(fmt, ##args); } while (0) 162 #endif 163 164 /* do print messages for unexpected interrupts */ 165 static int print_unex = 1; 166 #include <linux/module.h> 167 #include <linux/sched.h> 168 #include <linux/fs.h> 169 #include <linux/kernel.h> 170 #include <linux/timer.h> 171 #include <linux/workqueue.h> 172 #include <linux/fdreg.h> 173 #include <linux/fd.h> 174 #include <linux/hdreg.h> 175 #include <linux/errno.h> 176 #include <linux/slab.h> 177 #include <linux/mm.h> 178 #include <linux/bio.h> 179 #include <linux/string.h> 180 #include <linux/jiffies.h> 181 #include <linux/fcntl.h> 182 #include <linux/delay.h> 183 #include <linux/mc146818rtc.h> /* CMOS defines */ 184 #include <linux/ioport.h> 185 #include <linux/interrupt.h> 186 #include <linux/init.h> 187 #include <linux/major.h> 188 #include <linux/platform_device.h> 189 #include <linux/mod_devicetable.h> 190 #include <linux/mutex.h> 191 #include <linux/io.h> 192 #include <linux/uaccess.h> 193 #include <linux/async.h> 194 #include <linux/compat.h> 195 196 /* 197 * PS/2 floppies have much slower step rates than regular floppies. 198 * It's been recommended that take about 1/4 of the default speed 199 * in some more extreme cases. 200 */ 201 static DEFINE_MUTEX(floppy_mutex); 202 static int slow_floppy; 203 204 #include <asm/dma.h> 205 #include <asm/irq.h> 206 207 static int FLOPPY_IRQ = 6; 208 static int FLOPPY_DMA = 2; 209 static int can_use_virtual_dma = 2; 210 /* ======= 211 * can use virtual DMA: 212 * 0 = use of virtual DMA disallowed by config 213 * 1 = use of virtual DMA prescribed by config 214 * 2 = no virtual DMA preference configured. By default try hard DMA, 215 * but fall back on virtual DMA when not enough memory available 216 */ 217 218 static int use_virtual_dma; 219 /* ======= 220 * use virtual DMA 221 * 0 using hard DMA 222 * 1 using virtual DMA 223 * This variable is set to virtual when a DMA mem problem arises, and 224 * reset back in floppy_grab_irq_and_dma. 225 * It is not safe to reset it in other circumstances, because the floppy 226 * driver may have several buffers in use at once, and we do currently not 227 * record each buffers capabilities 228 */ 229 230 static DEFINE_SPINLOCK(floppy_lock); 231 232 static unsigned short virtual_dma_port = 0x3f0; 233 irqreturn_t floppy_interrupt(int irq, void *dev_id); 234 static int set_dor(int fdc, char mask, char data); 235 236 #define K_64 0x10000 /* 64KB */ 237 238 /* the following is the mask of allowed drives. By default units 2 and 239 * 3 of both floppy controllers are disabled, because switching on the 240 * motor of these drives causes system hangs on some PCI computers. drive 241 * 0 is the low bit (0x1), and drive 7 is the high bit (0x80). Bits are on if 242 * a drive is allowed. 243 * 244 * NOTE: This must come before we include the arch floppy header because 245 * some ports reference this variable from there. -DaveM 246 */ 247 248 static int allowed_drive_mask = 0x33; 249 250 #include <asm/floppy.h> 251 252 static int irqdma_allocated; 253 254 #include <linux/blk-mq.h> 255 #include <linux/blkpg.h> 256 #include <linux/cdrom.h> /* for the compatibility eject ioctl */ 257 #include <linux/completion.h> 258 259 static LIST_HEAD(floppy_reqs); 260 static struct request *current_req; 261 static int set_next_request(void); 262 263 #ifndef fd_get_dma_residue 264 #define fd_get_dma_residue() get_dma_residue(FLOPPY_DMA) 265 #endif 266 267 /* Dma Memory related stuff */ 268 269 #ifndef fd_dma_mem_free 270 #define fd_dma_mem_free(addr, size) free_pages(addr, get_order(size)) 271 #endif 272 273 #ifndef fd_dma_mem_alloc 274 #define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL, get_order(size)) 275 #endif 276 277 #ifndef fd_cacheflush 278 #define fd_cacheflush(addr, size) /* nothing... */ 279 #endif 280 281 static inline void fallback_on_nodma_alloc(char **addr, size_t l) 282 { 283 #ifdef FLOPPY_CAN_FALLBACK_ON_NODMA 284 if (*addr) 285 return; /* we have the memory */ 286 if (can_use_virtual_dma != 2) 287 return; /* no fallback allowed */ 288 pr_info("DMA memory shortage. Temporarily falling back on virtual DMA\n"); 289 *addr = (char *)nodma_mem_alloc(l); 290 #else 291 return; 292 #endif 293 } 294 295 /* End dma memory related stuff */ 296 297 static unsigned long fake_change; 298 static bool initialized; 299 300 #define ITYPE(x) (((x) >> 2) & 0x1f) 301 #define TOMINOR(x) ((x & 3) | ((x & 4) << 5)) 302 #define UNIT(x) ((x) & 0x03) /* drive on fdc */ 303 #define FDC(x) (((x) & 0x04) >> 2) /* fdc of drive */ 304 /* reverse mapping from unit and fdc to drive */ 305 #define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2)) 306 307 #define PH_HEAD(floppy, head) (((((floppy)->stretch & 2) >> 1) ^ head) << 2) 308 #define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH) 309 310 /* read/write commands */ 311 #define COMMAND 0 312 #define DR_SELECT 1 313 #define TRACK 2 314 #define HEAD 3 315 #define SECTOR 4 316 #define SIZECODE 5 317 #define SECT_PER_TRACK 6 318 #define GAP 7 319 #define SIZECODE2 8 320 #define NR_RW 9 321 322 /* format commands */ 323 #define F_SIZECODE 2 324 #define F_SECT_PER_TRACK 3 325 #define F_GAP 4 326 #define F_FILL 5 327 #define NR_F 6 328 329 /* 330 * Maximum disk size (in kilobytes). 331 * This default is used whenever the current disk size is unknown. 332 * [Now it is rather a minimum] 333 */ 334 #define MAX_DISK_SIZE 4 /* 3984 */ 335 336 /* 337 * globals used by 'result()' 338 */ 339 static unsigned char reply_buffer[FD_RAW_REPLY_SIZE]; 340 static int inr; /* size of reply buffer, when called from interrupt */ 341 #define ST0 0 342 #define ST1 1 343 #define ST2 2 344 #define ST3 0 /* result of GETSTATUS */ 345 #define R_TRACK 3 346 #define R_HEAD 4 347 #define R_SECTOR 5 348 #define R_SIZECODE 6 349 350 #define SEL_DLY (2 * HZ / 100) 351 352 /* 353 * this struct defines the different floppy drive types. 354 */ 355 static struct { 356 struct floppy_drive_params params; 357 const char *name; /* name printed while booting */ 358 } default_drive_params[] = { 359 /* NOTE: the time values in jiffies should be in msec! 360 CMOS drive type 361 | Maximum data rate supported by drive type 362 | | Head load time, msec 363 | | | Head unload time, msec (not used) 364 | | | | Step rate interval, usec 365 | | | | | Time needed for spinup time (jiffies) 366 | | | | | | Timeout for spinning down (jiffies) 367 | | | | | | | Spindown offset (where disk stops) 368 | | | | | | | | Select delay 369 | | | | | | | | | RPS 370 | | | | | | | | | | Max number of tracks 371 | | | | | | | | | | | Interrupt timeout 372 | | | | | | | | | | | | Max nonintlv. sectors 373 | | | | | | | | | | | | | -Max Errors- flags */ 374 {{0, 500, 16, 16, 8000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 80, 3*HZ, 20, {3,1,2,0,2}, 0, 375 0, { 7, 4, 8, 2, 1, 5, 3,10}, 3*HZ/2, 0 }, "unknown" }, 376 377 {{1, 300, 16, 16, 8000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 40, 3*HZ, 17, {3,1,2,0,2}, 0, 378 0, { 1, 0, 0, 0, 0, 0, 0, 0}, 3*HZ/2, 1 }, "360K PC" }, /*5 1/4 360 KB PC*/ 379 380 {{2, 500, 16, 16, 6000, 4*HZ/10, 3*HZ, 14, SEL_DLY, 6, 83, 3*HZ, 17, {3,1,2,0,2}, 0, 381 0, { 2, 5, 6,23,10,20,12, 0}, 3*HZ/2, 2 }, "1.2M" }, /*5 1/4 HD AT*/ 382 383 {{3, 250, 16, 16, 3000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 83, 3*HZ, 20, {3,1,2,0,2}, 0, 384 0, { 4,22,21,30, 3, 0, 0, 0}, 3*HZ/2, 4 }, "720k" }, /*3 1/2 DD*/ 385 386 {{4, 500, 16, 16, 4000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 20, {3,1,2,0,2}, 0, 387 0, { 7, 4,25,22,31,21,29,11}, 3*HZ/2, 7 }, "1.44M" }, /*3 1/2 HD*/ 388 389 {{5, 1000, 15, 8, 3000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 40, {3,1,2,0,2}, 0, 390 0, { 7, 8, 4,25,28,22,31,21}, 3*HZ/2, 8 }, "2.88M AMI BIOS" }, /*3 1/2 ED*/ 391 392 {{6, 1000, 15, 8, 3000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 40, {3,1,2,0,2}, 0, 393 0, { 7, 8, 4,25,28,22,31,21}, 3*HZ/2, 8 }, "2.88M" } /*3 1/2 ED*/ 394 /* | --autodetected formats--- | | | 395 * read_track | | Name printed when booting 396 * | Native format 397 * Frequency of disk change checks */ 398 }; 399 400 static struct floppy_drive_params drive_params[N_DRIVE]; 401 static struct floppy_drive_struct drive_state[N_DRIVE]; 402 static struct floppy_write_errors write_errors[N_DRIVE]; 403 static struct timer_list motor_off_timer[N_DRIVE]; 404 static struct blk_mq_tag_set tag_sets[N_DRIVE]; 405 static struct block_device *opened_bdev[N_DRIVE]; 406 static DEFINE_MUTEX(open_lock); 407 static struct floppy_raw_cmd *raw_cmd, default_raw_cmd; 408 409 /* 410 * This struct defines the different floppy types. 411 * 412 * Bit 0 of 'stretch' tells if the tracks need to be doubled for some 413 * types (e.g. 360kB diskette in 1.2MB drive, etc.). Bit 1 of 'stretch' 414 * tells if the disk is in Commodore 1581 format, which means side 0 sectors 415 * are located on side 1 of the disk but with a side 0 ID, and vice-versa. 416 * This is the same as the Sharp MZ-80 5.25" CP/M disk format, except that the 417 * 1581's logical side 0 is on physical side 1, whereas the Sharp's logical 418 * side 0 is on physical side 0 (but with the misnamed sector IDs). 419 * 'stretch' should probably be renamed to something more general, like 420 * 'options'. 421 * 422 * Bits 2 through 9 of 'stretch' tell the number of the first sector. 423 * The LSB (bit 2) is flipped. For most disks, the first sector 424 * is 1 (represented by 0x00<<2). For some CP/M and music sampler 425 * disks (such as Ensoniq EPS 16plus) it is 0 (represented as 0x01<<2). 426 * For Amstrad CPC disks it is 0xC1 (represented as 0xC0<<2). 427 * 428 * Other parameters should be self-explanatory (see also setfdprm(8)). 429 */ 430 /* 431 Size 432 | Sectors per track 433 | | Head 434 | | | Tracks 435 | | | | Stretch 436 | | | | | Gap 1 size 437 | | | | | | Data rate, | 0x40 for perp 438 | | | | | | | Spec1 (stepping rate, head unload 439 | | | | | | | | /fmt gap (gap2) */ 440 static struct floppy_struct floppy_type[32] = { 441 { 0, 0,0, 0,0,0x00,0x00,0x00,0x00,NULL }, /* 0 no testing */ 442 { 720, 9,2,40,0,0x2A,0x02,0xDF,0x50,"d360" }, /* 1 360KB PC */ 443 { 2400,15,2,80,0,0x1B,0x00,0xDF,0x54,"h1200" }, /* 2 1.2MB AT */ 444 { 720, 9,1,80,0,0x2A,0x02,0xDF,0x50,"D360" }, /* 3 360KB SS 3.5" */ 445 { 1440, 9,2,80,0,0x2A,0x02,0xDF,0x50,"D720" }, /* 4 720KB 3.5" */ 446 { 720, 9,2,40,1,0x23,0x01,0xDF,0x50,"h360" }, /* 5 360KB AT */ 447 { 1440, 9,2,80,0,0x23,0x01,0xDF,0x50,"h720" }, /* 6 720KB AT */ 448 { 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,"H1440" }, /* 7 1.44MB 3.5" */ 449 { 5760,36,2,80,0,0x1B,0x43,0xAF,0x54,"E2880" }, /* 8 2.88MB 3.5" */ 450 { 6240,39,2,80,0,0x1B,0x43,0xAF,0x28,"E3120" }, /* 9 3.12MB 3.5" */ 451 452 { 2880,18,2,80,0,0x25,0x00,0xDF,0x02,"h1440" }, /* 10 1.44MB 5.25" */ 453 { 3360,21,2,80,0,0x1C,0x00,0xCF,0x0C,"H1680" }, /* 11 1.68MB 3.5" */ 454 { 820,10,2,41,1,0x25,0x01,0xDF,0x2E,"h410" }, /* 12 410KB 5.25" */ 455 { 1640,10,2,82,0,0x25,0x02,0xDF,0x2E,"H820" }, /* 13 820KB 3.5" */ 456 { 2952,18,2,82,0,0x25,0x00,0xDF,0x02,"h1476" }, /* 14 1.48MB 5.25" */ 457 { 3444,21,2,82,0,0x25,0x00,0xDF,0x0C,"H1722" }, /* 15 1.72MB 3.5" */ 458 { 840,10,2,42,1,0x25,0x01,0xDF,0x2E,"h420" }, /* 16 420KB 5.25" */ 459 { 1660,10,2,83,0,0x25,0x02,0xDF,0x2E,"H830" }, /* 17 830KB 3.5" */ 460 { 2988,18,2,83,0,0x25,0x00,0xDF,0x02,"h1494" }, /* 18 1.49MB 5.25" */ 461 { 3486,21,2,83,0,0x25,0x00,0xDF,0x0C,"H1743" }, /* 19 1.74 MB 3.5" */ 462 463 { 1760,11,2,80,0,0x1C,0x09,0xCF,0x00,"h880" }, /* 20 880KB 5.25" */ 464 { 2080,13,2,80,0,0x1C,0x01,0xCF,0x00,"D1040" }, /* 21 1.04MB 3.5" */ 465 { 2240,14,2,80,0,0x1C,0x19,0xCF,0x00,"D1120" }, /* 22 1.12MB 3.5" */ 466 { 3200,20,2,80,0,0x1C,0x20,0xCF,0x2C,"h1600" }, /* 23 1.6MB 5.25" */ 467 { 3520,22,2,80,0,0x1C,0x08,0xCF,0x2e,"H1760" }, /* 24 1.76MB 3.5" */ 468 { 3840,24,2,80,0,0x1C,0x20,0xCF,0x00,"H1920" }, /* 25 1.92MB 3.5" */ 469 { 6400,40,2,80,0,0x25,0x5B,0xCF,0x00,"E3200" }, /* 26 3.20MB 3.5" */ 470 { 7040,44,2,80,0,0x25,0x5B,0xCF,0x00,"E3520" }, /* 27 3.52MB 3.5" */ 471 { 7680,48,2,80,0,0x25,0x63,0xCF,0x00,"E3840" }, /* 28 3.84MB 3.5" */ 472 { 3680,23,2,80,0,0x1C,0x10,0xCF,0x00,"H1840" }, /* 29 1.84MB 3.5" */ 473 474 { 1600,10,2,80,0,0x25,0x02,0xDF,0x2E,"D800" }, /* 30 800KB 3.5" */ 475 { 3200,20,2,80,0,0x1C,0x00,0xCF,0x2C,"H1600" }, /* 31 1.6MB 3.5" */ 476 }; 477 478 static struct gendisk *disks[N_DRIVE][ARRAY_SIZE(floppy_type)]; 479 480 #define SECTSIZE (_FD_SECTSIZE(*floppy)) 481 482 /* Auto-detection: Disk type used until the next media change occurs. */ 483 static struct floppy_struct *current_type[N_DRIVE]; 484 485 /* 486 * User-provided type information. current_type points to 487 * the respective entry of this array. 488 */ 489 static struct floppy_struct user_params[N_DRIVE]; 490 491 static sector_t floppy_sizes[256]; 492 493 static char floppy_device_name[] = "floppy"; 494 495 /* 496 * The driver is trying to determine the correct media format 497 * while probing is set. rw_interrupt() clears it after a 498 * successful access. 499 */ 500 static int probing; 501 502 /* Synchronization of FDC access. */ 503 #define FD_COMMAND_NONE -1 504 #define FD_COMMAND_ERROR 2 505 #define FD_COMMAND_OKAY 3 506 507 static volatile int command_status = FD_COMMAND_NONE; 508 static unsigned long fdc_busy; 509 static DECLARE_WAIT_QUEUE_HEAD(fdc_wait); 510 static DECLARE_WAIT_QUEUE_HEAD(command_done); 511 512 /* Errors during formatting are counted here. */ 513 static int format_errors; 514 515 /* Format request descriptor. */ 516 static struct format_descr format_req; 517 518 /* 519 * Rate is 0 for 500kb/s, 1 for 300kbps, 2 for 250kbps 520 * Spec1 is 0xSH, where S is stepping rate (F=1ms, E=2ms, D=3ms etc), 521 * H is head unload time (1=16ms, 2=32ms, etc) 522 */ 523 524 /* 525 * Track buffer 526 * Because these are written to by the DMA controller, they must 527 * not contain a 64k byte boundary crossing, or data will be 528 * corrupted/lost. 529 */ 530 static char *floppy_track_buffer; 531 static int max_buffer_sectors; 532 533 static int *errors; 534 typedef void (*done_f)(int); 535 static const struct cont_t { 536 void (*interrupt)(void); 537 /* this is called after the interrupt of the 538 * main command */ 539 void (*redo)(void); /* this is called to retry the operation */ 540 void (*error)(void); /* this is called to tally an error */ 541 done_f done; /* this is called to say if the operation has 542 * succeeded/failed */ 543 } *cont; 544 545 static void floppy_ready(void); 546 static void floppy_start(void); 547 static void process_fd_request(void); 548 static void recalibrate_floppy(void); 549 static void floppy_shutdown(struct work_struct *); 550 551 static int floppy_request_regions(int); 552 static void floppy_release_regions(int); 553 static int floppy_grab_irq_and_dma(void); 554 static void floppy_release_irq_and_dma(void); 555 556 /* 557 * The "reset" variable should be tested whenever an interrupt is scheduled, 558 * after the commands have been sent. This is to ensure that the driver doesn't 559 * get wedged when the interrupt doesn't come because of a failed command. 560 * reset doesn't need to be tested before sending commands, because 561 * output_byte is automatically disabled when reset is set. 562 */ 563 static void reset_fdc(void); 564 static int floppy_revalidate(struct gendisk *disk); 565 566 /* 567 * These are global variables, as that's the easiest way to give 568 * information to interrupts. They are the data used for the current 569 * request. 570 */ 571 #define NO_TRACK -1 572 #define NEED_1_RECAL -2 573 #define NEED_2_RECAL -3 574 575 static atomic_t usage_count = ATOMIC_INIT(0); 576 577 /* buffer related variables */ 578 static int buffer_track = -1; 579 static int buffer_drive = -1; 580 static int buffer_min = -1; 581 static int buffer_max = -1; 582 583 /* fdc related variables, should end up in a struct */ 584 static struct floppy_fdc_state fdc_state[N_FDC]; 585 static int current_fdc; /* current fdc */ 586 587 static struct workqueue_struct *floppy_wq; 588 589 static struct floppy_struct *_floppy = floppy_type; 590 static unsigned char current_drive; 591 static long current_count_sectors; 592 static unsigned char fsector_t; /* sector in track */ 593 static unsigned char in_sector_offset; /* offset within physical sector, 594 * expressed in units of 512 bytes */ 595 596 static inline unsigned char fdc_inb(int fdc, int reg) 597 { 598 return fd_inb(fdc_state[fdc].address, reg); 599 } 600 601 static inline void fdc_outb(unsigned char value, int fdc, int reg) 602 { 603 fd_outb(value, fdc_state[fdc].address, reg); 604 } 605 606 static inline bool drive_no_geom(int drive) 607 { 608 return !current_type[drive] && !ITYPE(drive_state[drive].fd_device); 609 } 610 611 #ifndef fd_eject 612 static inline int fd_eject(int drive) 613 { 614 return -EINVAL; 615 } 616 #endif 617 618 /* 619 * Debugging 620 * ========= 621 */ 622 #ifdef DEBUGT 623 static long unsigned debugtimer; 624 625 static inline void set_debugt(void) 626 { 627 debugtimer = jiffies; 628 } 629 630 static inline void debugt(const char *func, const char *msg) 631 { 632 if (drive_params[current_drive].flags & DEBUGT) 633 pr_info("%s:%s dtime=%lu\n", func, msg, jiffies - debugtimer); 634 } 635 #else 636 static inline void set_debugt(void) { } 637 static inline void debugt(const char *func, const char *msg) { } 638 #endif /* DEBUGT */ 639 640 641 static DECLARE_DELAYED_WORK(fd_timeout, floppy_shutdown); 642 static const char *timeout_message; 643 644 static void is_alive(const char *func, const char *message) 645 { 646 /* this routine checks whether the floppy driver is "alive" */ 647 if (test_bit(0, &fdc_busy) && command_status < 2 && 648 !delayed_work_pending(&fd_timeout)) { 649 DPRINT("%s: timeout handler died. %s\n", func, message); 650 } 651 } 652 653 static void (*do_floppy)(void) = NULL; 654 655 #define OLOGSIZE 20 656 657 static void (*lasthandler)(void); 658 static unsigned long interruptjiffies; 659 static unsigned long resultjiffies; 660 static int resultsize; 661 static unsigned long lastredo; 662 663 static struct output_log { 664 unsigned char data; 665 unsigned char status; 666 unsigned long jiffies; 667 } output_log[OLOGSIZE]; 668 669 static int output_log_pos; 670 671 #define MAXTIMEOUT -2 672 673 static void __reschedule_timeout(int drive, const char *message) 674 { 675 unsigned long delay; 676 677 if (drive < 0 || drive >= N_DRIVE) { 678 delay = 20UL * HZ; 679 drive = 0; 680 } else 681 delay = drive_params[drive].timeout; 682 683 mod_delayed_work(floppy_wq, &fd_timeout, delay); 684 if (drive_params[drive].flags & FD_DEBUG) 685 DPRINT("reschedule timeout %s\n", message); 686 timeout_message = message; 687 } 688 689 static void reschedule_timeout(int drive, const char *message) 690 { 691 unsigned long flags; 692 693 spin_lock_irqsave(&floppy_lock, flags); 694 __reschedule_timeout(drive, message); 695 spin_unlock_irqrestore(&floppy_lock, flags); 696 } 697 698 #define INFBOUND(a, b) (a) = max_t(int, a, b) 699 #define SUPBOUND(a, b) (a) = min_t(int, a, b) 700 701 /* 702 * Bottom half floppy driver. 703 * ========================== 704 * 705 * This part of the file contains the code talking directly to the hardware, 706 * and also the main service loop (seek-configure-spinup-command) 707 */ 708 709 /* 710 * disk change. 711 * This routine is responsible for maintaining the FD_DISK_CHANGE flag, 712 * and the last_checked date. 713 * 714 * last_checked is the date of the last check which showed 'no disk change' 715 * FD_DISK_CHANGE is set under two conditions: 716 * 1. The floppy has been changed after some i/o to that floppy already 717 * took place. 718 * 2. No floppy disk is in the drive. This is done in order to ensure that 719 * requests are quickly flushed in case there is no disk in the drive. It 720 * follows that FD_DISK_CHANGE can only be cleared if there is a disk in 721 * the drive. 722 * 723 * For 1., maxblock is observed. Maxblock is 0 if no i/o has taken place yet. 724 * For 2., FD_DISK_NEWCHANGE is watched. FD_DISK_NEWCHANGE is cleared on 725 * each seek. If a disk is present, the disk change line should also be 726 * cleared on each seek. Thus, if FD_DISK_NEWCHANGE is clear, but the disk 727 * change line is set, this means either that no disk is in the drive, or 728 * that it has been removed since the last seek. 729 * 730 * This means that we really have a third possibility too: 731 * The floppy has been changed after the last seek. 732 */ 733 734 static int disk_change(int drive) 735 { 736 int fdc = FDC(drive); 737 738 if (time_before(jiffies, drive_state[drive].select_date + drive_params[drive].select_delay)) 739 DPRINT("WARNING disk change called early\n"); 740 if (!(fdc_state[fdc].dor & (0x10 << UNIT(drive))) || 741 (fdc_state[fdc].dor & 3) != UNIT(drive) || fdc != FDC(drive)) { 742 DPRINT("probing disk change on unselected drive\n"); 743 DPRINT("drive=%d fdc=%d dor=%x\n", drive, FDC(drive), 744 (unsigned int)fdc_state[fdc].dor); 745 } 746 747 debug_dcl(drive_params[drive].flags, 748 "checking disk change line for drive %d\n", drive); 749 debug_dcl(drive_params[drive].flags, "jiffies=%lu\n", jiffies); 750 debug_dcl(drive_params[drive].flags, "disk change line=%x\n", 751 fdc_inb(fdc, FD_DIR) & 0x80); 752 debug_dcl(drive_params[drive].flags, "flags=%lx\n", 753 drive_state[drive].flags); 754 755 if (drive_params[drive].flags & FD_BROKEN_DCL) 756 return test_bit(FD_DISK_CHANGED_BIT, 757 &drive_state[drive].flags); 758 if ((fdc_inb(fdc, FD_DIR) ^ drive_params[drive].flags) & 0x80) { 759 set_bit(FD_VERIFY_BIT, &drive_state[drive].flags); 760 /* verify write protection */ 761 762 if (drive_state[drive].maxblock) /* mark it changed */ 763 set_bit(FD_DISK_CHANGED_BIT, 764 &drive_state[drive].flags); 765 766 /* invalidate its geometry */ 767 if (drive_state[drive].keep_data >= 0) { 768 if ((drive_params[drive].flags & FTD_MSG) && 769 current_type[drive] != NULL) 770 DPRINT("Disk type is undefined after disk change\n"); 771 current_type[drive] = NULL; 772 floppy_sizes[TOMINOR(drive)] = MAX_DISK_SIZE << 1; 773 } 774 775 return 1; 776 } else { 777 drive_state[drive].last_checked = jiffies; 778 clear_bit(FD_DISK_NEWCHANGE_BIT, &drive_state[drive].flags); 779 } 780 return 0; 781 } 782 783 static inline int is_selected(int dor, int unit) 784 { 785 return ((dor & (0x10 << unit)) && (dor & 3) == unit); 786 } 787 788 static bool is_ready_state(int status) 789 { 790 int state = status & (STATUS_READY | STATUS_DIR | STATUS_DMA); 791 return state == STATUS_READY; 792 } 793 794 static int set_dor(int fdc, char mask, char data) 795 { 796 unsigned char unit; 797 unsigned char drive; 798 unsigned char newdor; 799 unsigned char olddor; 800 801 if (fdc_state[fdc].address == -1) 802 return -1; 803 804 olddor = fdc_state[fdc].dor; 805 newdor = (olddor & mask) | data; 806 if (newdor != olddor) { 807 unit = olddor & 0x3; 808 if (is_selected(olddor, unit) && !is_selected(newdor, unit)) { 809 drive = REVDRIVE(fdc, unit); 810 debug_dcl(drive_params[drive].flags, 811 "calling disk change from set_dor\n"); 812 disk_change(drive); 813 } 814 fdc_state[fdc].dor = newdor; 815 fdc_outb(newdor, fdc, FD_DOR); 816 817 unit = newdor & 0x3; 818 if (!is_selected(olddor, unit) && is_selected(newdor, unit)) { 819 drive = REVDRIVE(fdc, unit); 820 drive_state[drive].select_date = jiffies; 821 } 822 } 823 return olddor; 824 } 825 826 static void twaddle(int fdc, int drive) 827 { 828 if (drive_params[drive].select_delay) 829 return; 830 fdc_outb(fdc_state[fdc].dor & ~(0x10 << UNIT(drive)), 831 fdc, FD_DOR); 832 fdc_outb(fdc_state[fdc].dor, fdc, FD_DOR); 833 drive_state[drive].select_date = jiffies; 834 } 835 836 /* 837 * Reset all driver information about the specified fdc. 838 * This is needed after a reset, and after a raw command. 839 */ 840 static void reset_fdc_info(int fdc, int mode) 841 { 842 int drive; 843 844 fdc_state[fdc].spec1 = fdc_state[fdc].spec2 = -1; 845 fdc_state[fdc].need_configure = 1; 846 fdc_state[fdc].perp_mode = 1; 847 fdc_state[fdc].rawcmd = 0; 848 for (drive = 0; drive < N_DRIVE; drive++) 849 if (FDC(drive) == fdc && 850 (mode || drive_state[drive].track != NEED_1_RECAL)) 851 drive_state[drive].track = NEED_2_RECAL; 852 } 853 854 /* 855 * selects the fdc and drive, and enables the fdc's input/dma. 856 * Both current_drive and current_fdc are changed to match the new drive. 857 */ 858 static void set_fdc(int drive) 859 { 860 unsigned int fdc; 861 862 if (drive < 0 || drive >= N_DRIVE) { 863 pr_info("bad drive value %d\n", drive); 864 return; 865 } 866 867 fdc = FDC(drive); 868 if (fdc >= N_FDC) { 869 pr_info("bad fdc value\n"); 870 return; 871 } 872 873 set_dor(fdc, ~0, 8); 874 #if N_FDC > 1 875 set_dor(1 - fdc, ~8, 0); 876 #endif 877 if (fdc_state[fdc].rawcmd == 2) 878 reset_fdc_info(fdc, 1); 879 if (fdc_inb(fdc, FD_STATUS) != STATUS_READY) 880 fdc_state[fdc].reset = 1; 881 882 current_drive = drive; 883 current_fdc = fdc; 884 } 885 886 /* 887 * locks the driver. 888 * Both current_drive and current_fdc are changed to match the new drive. 889 */ 890 static int lock_fdc(int drive) 891 { 892 if (WARN(atomic_read(&usage_count) == 0, 893 "Trying to lock fdc while usage count=0\n")) 894 return -1; 895 896 if (wait_event_interruptible(fdc_wait, !test_and_set_bit(0, &fdc_busy))) 897 return -EINTR; 898 899 command_status = FD_COMMAND_NONE; 900 901 reschedule_timeout(drive, "lock fdc"); 902 set_fdc(drive); 903 return 0; 904 } 905 906 /* unlocks the driver */ 907 static void unlock_fdc(void) 908 { 909 if (!test_bit(0, &fdc_busy)) 910 DPRINT("FDC access conflict!\n"); 911 912 raw_cmd = NULL; 913 command_status = FD_COMMAND_NONE; 914 cancel_delayed_work(&fd_timeout); 915 do_floppy = NULL; 916 cont = NULL; 917 clear_bit(0, &fdc_busy); 918 wake_up(&fdc_wait); 919 } 920 921 /* switches the motor off after a given timeout */ 922 static void motor_off_callback(struct timer_list *t) 923 { 924 unsigned long nr = t - motor_off_timer; 925 unsigned char mask = ~(0x10 << UNIT(nr)); 926 927 if (WARN_ON_ONCE(nr >= N_DRIVE)) 928 return; 929 930 set_dor(FDC(nr), mask, 0); 931 } 932 933 /* schedules motor off */ 934 static void floppy_off(unsigned int drive) 935 { 936 unsigned long volatile delta; 937 int fdc = FDC(drive); 938 939 if (!(fdc_state[fdc].dor & (0x10 << UNIT(drive)))) 940 return; 941 942 del_timer(motor_off_timer + drive); 943 944 /* make spindle stop in a position which minimizes spinup time 945 * next time */ 946 if (drive_params[drive].rps) { 947 delta = jiffies - drive_state[drive].first_read_date + HZ - 948 drive_params[drive].spindown_offset; 949 delta = ((delta * drive_params[drive].rps) % HZ) / drive_params[drive].rps; 950 motor_off_timer[drive].expires = 951 jiffies + drive_params[drive].spindown - delta; 952 } 953 add_timer(motor_off_timer + drive); 954 } 955 956 /* 957 * cycle through all N_DRIVE floppy drives, for disk change testing. 958 * stopping at current drive. This is done before any long operation, to 959 * be sure to have up to date disk change information. 960 */ 961 static void scandrives(void) 962 { 963 int i; 964 int drive; 965 int saved_drive; 966 967 if (drive_params[current_drive].select_delay) 968 return; 969 970 saved_drive = current_drive; 971 for (i = 0; i < N_DRIVE; i++) { 972 drive = (saved_drive + i + 1) % N_DRIVE; 973 if (drive_state[drive].fd_ref == 0 || drive_params[drive].select_delay != 0) 974 continue; /* skip closed drives */ 975 set_fdc(drive); 976 if (!(set_dor(current_fdc, ~3, UNIT(drive) | (0x10 << UNIT(drive))) & 977 (0x10 << UNIT(drive)))) 978 /* switch the motor off again, if it was off to 979 * begin with */ 980 set_dor(current_fdc, ~(0x10 << UNIT(drive)), 0); 981 } 982 set_fdc(saved_drive); 983 } 984 985 static void empty(void) 986 { 987 } 988 989 static void (*floppy_work_fn)(void); 990 991 static void floppy_work_workfn(struct work_struct *work) 992 { 993 floppy_work_fn(); 994 } 995 996 static DECLARE_WORK(floppy_work, floppy_work_workfn); 997 998 static void schedule_bh(void (*handler)(void)) 999 { 1000 WARN_ON(work_pending(&floppy_work)); 1001 1002 floppy_work_fn = handler; 1003 queue_work(floppy_wq, &floppy_work); 1004 } 1005 1006 static void (*fd_timer_fn)(void) = NULL; 1007 1008 static void fd_timer_workfn(struct work_struct *work) 1009 { 1010 fd_timer_fn(); 1011 } 1012 1013 static DECLARE_DELAYED_WORK(fd_timer, fd_timer_workfn); 1014 1015 static void cancel_activity(void) 1016 { 1017 do_floppy = NULL; 1018 cancel_delayed_work(&fd_timer); 1019 cancel_work_sync(&floppy_work); 1020 } 1021 1022 /* this function makes sure that the disk stays in the drive during the 1023 * transfer */ 1024 static void fd_watchdog(void) 1025 { 1026 debug_dcl(drive_params[current_drive].flags, 1027 "calling disk change from watchdog\n"); 1028 1029 if (disk_change(current_drive)) { 1030 DPRINT("disk removed during i/o\n"); 1031 cancel_activity(); 1032 cont->done(0); 1033 reset_fdc(); 1034 } else { 1035 cancel_delayed_work(&fd_timer); 1036 fd_timer_fn = fd_watchdog; 1037 queue_delayed_work(floppy_wq, &fd_timer, HZ / 10); 1038 } 1039 } 1040 1041 static void main_command_interrupt(void) 1042 { 1043 cancel_delayed_work(&fd_timer); 1044 cont->interrupt(); 1045 } 1046 1047 /* waits for a delay (spinup or select) to pass */ 1048 static int fd_wait_for_completion(unsigned long expires, 1049 void (*function)(void)) 1050 { 1051 if (fdc_state[current_fdc].reset) { 1052 reset_fdc(); /* do the reset during sleep to win time 1053 * if we don't need to sleep, it's a good 1054 * occasion anyways */ 1055 return 1; 1056 } 1057 1058 if (time_before(jiffies, expires)) { 1059 cancel_delayed_work(&fd_timer); 1060 fd_timer_fn = function; 1061 queue_delayed_work(floppy_wq, &fd_timer, expires - jiffies); 1062 return 1; 1063 } 1064 return 0; 1065 } 1066 1067 static void setup_DMA(void) 1068 { 1069 unsigned long f; 1070 1071 if (raw_cmd->length == 0) { 1072 print_hex_dump(KERN_INFO, "zero dma transfer size: ", 1073 DUMP_PREFIX_NONE, 16, 1, 1074 raw_cmd->fullcmd, raw_cmd->cmd_count, false); 1075 cont->done(0); 1076 fdc_state[current_fdc].reset = 1; 1077 return; 1078 } 1079 if (((unsigned long)raw_cmd->kernel_data) % 512) { 1080 pr_info("non aligned address: %p\n", raw_cmd->kernel_data); 1081 cont->done(0); 1082 fdc_state[current_fdc].reset = 1; 1083 return; 1084 } 1085 f = claim_dma_lock(); 1086 fd_disable_dma(); 1087 #ifdef fd_dma_setup 1088 if (fd_dma_setup(raw_cmd->kernel_data, raw_cmd->length, 1089 (raw_cmd->flags & FD_RAW_READ) ? 1090 DMA_MODE_READ : DMA_MODE_WRITE, 1091 fdc_state[current_fdc].address) < 0) { 1092 release_dma_lock(f); 1093 cont->done(0); 1094 fdc_state[current_fdc].reset = 1; 1095 return; 1096 } 1097 release_dma_lock(f); 1098 #else 1099 fd_clear_dma_ff(); 1100 fd_cacheflush(raw_cmd->kernel_data, raw_cmd->length); 1101 fd_set_dma_mode((raw_cmd->flags & FD_RAW_READ) ? 1102 DMA_MODE_READ : DMA_MODE_WRITE); 1103 fd_set_dma_addr(raw_cmd->kernel_data); 1104 fd_set_dma_count(raw_cmd->length); 1105 virtual_dma_port = fdc_state[current_fdc].address; 1106 fd_enable_dma(); 1107 release_dma_lock(f); 1108 #endif 1109 } 1110 1111 static void show_floppy(int fdc); 1112 1113 /* waits until the fdc becomes ready */ 1114 static int wait_til_ready(int fdc) 1115 { 1116 int status; 1117 int counter; 1118 1119 if (fdc_state[fdc].reset) 1120 return -1; 1121 for (counter = 0; counter < 10000; counter++) { 1122 status = fdc_inb(fdc, FD_STATUS); 1123 if (status & STATUS_READY) 1124 return status; 1125 } 1126 if (initialized) { 1127 DPRINT("Getstatus times out (%x) on fdc %d\n", status, fdc); 1128 show_floppy(fdc); 1129 } 1130 fdc_state[fdc].reset = 1; 1131 return -1; 1132 } 1133 1134 /* sends a command byte to the fdc */ 1135 static int output_byte(int fdc, char byte) 1136 { 1137 int status = wait_til_ready(fdc); 1138 1139 if (status < 0) 1140 return -1; 1141 1142 if (is_ready_state(status)) { 1143 fdc_outb(byte, fdc, FD_DATA); 1144 output_log[output_log_pos].data = byte; 1145 output_log[output_log_pos].status = status; 1146 output_log[output_log_pos].jiffies = jiffies; 1147 output_log_pos = (output_log_pos + 1) % OLOGSIZE; 1148 return 0; 1149 } 1150 fdc_state[fdc].reset = 1; 1151 if (initialized) { 1152 DPRINT("Unable to send byte %x to FDC. Fdc=%x Status=%x\n", 1153 byte, fdc, status); 1154 show_floppy(fdc); 1155 } 1156 return -1; 1157 } 1158 1159 /* gets the response from the fdc */ 1160 static int result(int fdc) 1161 { 1162 int i; 1163 int status = 0; 1164 1165 for (i = 0; i < FD_RAW_REPLY_SIZE; i++) { 1166 status = wait_til_ready(fdc); 1167 if (status < 0) 1168 break; 1169 status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA; 1170 if ((status & ~STATUS_BUSY) == STATUS_READY) { 1171 resultjiffies = jiffies; 1172 resultsize = i; 1173 return i; 1174 } 1175 if (status == (STATUS_DIR | STATUS_READY | STATUS_BUSY)) 1176 reply_buffer[i] = fdc_inb(fdc, FD_DATA); 1177 else 1178 break; 1179 } 1180 if (initialized) { 1181 DPRINT("get result error. Fdc=%d Last status=%x Read bytes=%d\n", 1182 fdc, status, i); 1183 show_floppy(fdc); 1184 } 1185 fdc_state[fdc].reset = 1; 1186 return -1; 1187 } 1188 1189 #define MORE_OUTPUT -2 1190 /* does the fdc need more output? */ 1191 static int need_more_output(int fdc) 1192 { 1193 int status = wait_til_ready(fdc); 1194 1195 if (status < 0) 1196 return -1; 1197 1198 if (is_ready_state(status)) 1199 return MORE_OUTPUT; 1200 1201 return result(fdc); 1202 } 1203 1204 /* Set perpendicular mode as required, based on data rate, if supported. 1205 * 82077 Now tested. 1Mbps data rate only possible with 82077-1. 1206 */ 1207 static void perpendicular_mode(int fdc) 1208 { 1209 unsigned char perp_mode; 1210 1211 if (raw_cmd->rate & 0x40) { 1212 switch (raw_cmd->rate & 3) { 1213 case 0: 1214 perp_mode = 2; 1215 break; 1216 case 3: 1217 perp_mode = 3; 1218 break; 1219 default: 1220 DPRINT("Invalid data rate for perpendicular mode!\n"); 1221 cont->done(0); 1222 fdc_state[fdc].reset = 1; 1223 /* 1224 * convenient way to return to 1225 * redo without too much hassle 1226 * (deep stack et al.) 1227 */ 1228 return; 1229 } 1230 } else 1231 perp_mode = 0; 1232 1233 if (fdc_state[fdc].perp_mode == perp_mode) 1234 return; 1235 if (fdc_state[fdc].version >= FDC_82077_ORIG) { 1236 output_byte(fdc, FD_PERPENDICULAR); 1237 output_byte(fdc, perp_mode); 1238 fdc_state[fdc].perp_mode = perp_mode; 1239 } else if (perp_mode) { 1240 DPRINT("perpendicular mode not supported by this FDC.\n"); 1241 } 1242 } /* perpendicular_mode */ 1243 1244 static int fifo_depth = 0xa; 1245 static int no_fifo; 1246 1247 static int fdc_configure(int fdc) 1248 { 1249 /* Turn on FIFO */ 1250 output_byte(fdc, FD_CONFIGURE); 1251 if (need_more_output(fdc) != MORE_OUTPUT) 1252 return 0; 1253 output_byte(fdc, 0); 1254 output_byte(fdc, 0x10 | (no_fifo & 0x20) | (fifo_depth & 0xf)); 1255 output_byte(fdc, 0); /* pre-compensation from track 0 upwards */ 1256 return 1; 1257 } 1258 1259 #define NOMINAL_DTR 500 1260 1261 /* Issue a "SPECIFY" command to set the step rate time, head unload time, 1262 * head load time, and DMA disable flag to values needed by floppy. 1263 * 1264 * The value "dtr" is the data transfer rate in Kbps. It is needed 1265 * to account for the data rate-based scaling done by the 82072 and 82077 1266 * FDC types. This parameter is ignored for other types of FDCs (i.e. 1267 * 8272a). 1268 * 1269 * Note that changing the data transfer rate has a (probably deleterious) 1270 * effect on the parameters subject to scaling for 82072/82077 FDCs, so 1271 * fdc_specify is called again after each data transfer rate 1272 * change. 1273 * 1274 * srt: 1000 to 16000 in microseconds 1275 * hut: 16 to 240 milliseconds 1276 * hlt: 2 to 254 milliseconds 1277 * 1278 * These values are rounded up to the next highest available delay time. 1279 */ 1280 static void fdc_specify(int fdc, int drive) 1281 { 1282 unsigned char spec1; 1283 unsigned char spec2; 1284 unsigned long srt; 1285 unsigned long hlt; 1286 unsigned long hut; 1287 unsigned long dtr = NOMINAL_DTR; 1288 unsigned long scale_dtr = NOMINAL_DTR; 1289 int hlt_max_code = 0x7f; 1290 int hut_max_code = 0xf; 1291 1292 if (fdc_state[fdc].need_configure && 1293 fdc_state[fdc].version >= FDC_82072A) { 1294 fdc_configure(fdc); 1295 fdc_state[fdc].need_configure = 0; 1296 } 1297 1298 switch (raw_cmd->rate & 0x03) { 1299 case 3: 1300 dtr = 1000; 1301 break; 1302 case 1: 1303 dtr = 300; 1304 if (fdc_state[fdc].version >= FDC_82078) { 1305 /* chose the default rate table, not the one 1306 * where 1 = 2 Mbps */ 1307 output_byte(fdc, FD_DRIVESPEC); 1308 if (need_more_output(fdc) == MORE_OUTPUT) { 1309 output_byte(fdc, UNIT(drive)); 1310 output_byte(fdc, 0xc0); 1311 } 1312 } 1313 break; 1314 case 2: 1315 dtr = 250; 1316 break; 1317 } 1318 1319 if (fdc_state[fdc].version >= FDC_82072) { 1320 scale_dtr = dtr; 1321 hlt_max_code = 0x00; /* 0==256msec*dtr0/dtr (not linear!) */ 1322 hut_max_code = 0x0; /* 0==256msec*dtr0/dtr (not linear!) */ 1323 } 1324 1325 /* Convert step rate from microseconds to milliseconds and 4 bits */ 1326 srt = 16 - DIV_ROUND_UP(drive_params[drive].srt * scale_dtr / 1000, 1327 NOMINAL_DTR); 1328 if (slow_floppy) 1329 srt = srt / 4; 1330 1331 SUPBOUND(srt, 0xf); 1332 INFBOUND(srt, 0); 1333 1334 hlt = DIV_ROUND_UP(drive_params[drive].hlt * scale_dtr / 2, 1335 NOMINAL_DTR); 1336 if (hlt < 0x01) 1337 hlt = 0x01; 1338 else if (hlt > 0x7f) 1339 hlt = hlt_max_code; 1340 1341 hut = DIV_ROUND_UP(drive_params[drive].hut * scale_dtr / 16, 1342 NOMINAL_DTR); 1343 if (hut < 0x1) 1344 hut = 0x1; 1345 else if (hut > 0xf) 1346 hut = hut_max_code; 1347 1348 spec1 = (srt << 4) | hut; 1349 spec2 = (hlt << 1) | (use_virtual_dma & 1); 1350 1351 /* If these parameters did not change, just return with success */ 1352 if (fdc_state[fdc].spec1 != spec1 || 1353 fdc_state[fdc].spec2 != spec2) { 1354 /* Go ahead and set spec1 and spec2 */ 1355 output_byte(fdc, FD_SPECIFY); 1356 output_byte(fdc, fdc_state[fdc].spec1 = spec1); 1357 output_byte(fdc, fdc_state[fdc].spec2 = spec2); 1358 } 1359 } /* fdc_specify */ 1360 1361 /* Set the FDC's data transfer rate on behalf of the specified drive. 1362 * NOTE: with 82072/82077 FDCs, changing the data rate requires a reissue 1363 * of the specify command (i.e. using the fdc_specify function). 1364 */ 1365 static int fdc_dtr(void) 1366 { 1367 /* If data rate not already set to desired value, set it. */ 1368 if ((raw_cmd->rate & 3) == fdc_state[current_fdc].dtr) 1369 return 0; 1370 1371 /* Set dtr */ 1372 fdc_outb(raw_cmd->rate & 3, current_fdc, FD_DCR); 1373 1374 /* TODO: some FDC/drive combinations (C&T 82C711 with TEAC 1.2MB) 1375 * need a stabilization period of several milliseconds to be 1376 * enforced after data rate changes before R/W operations. 1377 * Pause 5 msec to avoid trouble. (Needs to be 2 jiffies) 1378 */ 1379 fdc_state[current_fdc].dtr = raw_cmd->rate & 3; 1380 return fd_wait_for_completion(jiffies + 2UL * HZ / 100, floppy_ready); 1381 } /* fdc_dtr */ 1382 1383 static void tell_sector(void) 1384 { 1385 pr_cont(": track %d, head %d, sector %d, size %d", 1386 reply_buffer[R_TRACK], reply_buffer[R_HEAD], 1387 reply_buffer[R_SECTOR], 1388 reply_buffer[R_SIZECODE]); 1389 } /* tell_sector */ 1390 1391 static void print_errors(void) 1392 { 1393 DPRINT(""); 1394 if (reply_buffer[ST0] & ST0_ECE) { 1395 pr_cont("Recalibrate failed!"); 1396 } else if (reply_buffer[ST2] & ST2_CRC) { 1397 pr_cont("data CRC error"); 1398 tell_sector(); 1399 } else if (reply_buffer[ST1] & ST1_CRC) { 1400 pr_cont("CRC error"); 1401 tell_sector(); 1402 } else if ((reply_buffer[ST1] & (ST1_MAM | ST1_ND)) || 1403 (reply_buffer[ST2] & ST2_MAM)) { 1404 if (!probing) { 1405 pr_cont("sector not found"); 1406 tell_sector(); 1407 } else 1408 pr_cont("probe failed..."); 1409 } else if (reply_buffer[ST2] & ST2_WC) { /* seek error */ 1410 pr_cont("wrong cylinder"); 1411 } else if (reply_buffer[ST2] & ST2_BC) { /* cylinder marked as bad */ 1412 pr_cont("bad cylinder"); 1413 } else { 1414 pr_cont("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x", 1415 reply_buffer[ST0], reply_buffer[ST1], 1416 reply_buffer[ST2]); 1417 tell_sector(); 1418 } 1419 pr_cont("\n"); 1420 } 1421 1422 /* 1423 * OK, this error interpreting routine is called after a 1424 * DMA read/write has succeeded 1425 * or failed, so we check the results, and copy any buffers. 1426 * hhb: Added better error reporting. 1427 * ak: Made this into a separate routine. 1428 */ 1429 static int interpret_errors(void) 1430 { 1431 char bad; 1432 1433 if (inr != 7) { 1434 DPRINT("-- FDC reply error\n"); 1435 fdc_state[current_fdc].reset = 1; 1436 return 1; 1437 } 1438 1439 /* check IC to find cause of interrupt */ 1440 switch (reply_buffer[ST0] & ST0_INTR) { 1441 case 0x40: /* error occurred during command execution */ 1442 if (reply_buffer[ST1] & ST1_EOC) 1443 return 0; /* occurs with pseudo-DMA */ 1444 bad = 1; 1445 if (reply_buffer[ST1] & ST1_WP) { 1446 DPRINT("Drive is write protected\n"); 1447 clear_bit(FD_DISK_WRITABLE_BIT, 1448 &drive_state[current_drive].flags); 1449 cont->done(0); 1450 bad = 2; 1451 } else if (reply_buffer[ST1] & ST1_ND) { 1452 set_bit(FD_NEED_TWADDLE_BIT, 1453 &drive_state[current_drive].flags); 1454 } else if (reply_buffer[ST1] & ST1_OR) { 1455 if (drive_params[current_drive].flags & FTD_MSG) 1456 DPRINT("Over/Underrun - retrying\n"); 1457 bad = 0; 1458 } else if (*errors >= drive_params[current_drive].max_errors.reporting) { 1459 print_errors(); 1460 } 1461 if (reply_buffer[ST2] & ST2_WC || reply_buffer[ST2] & ST2_BC) 1462 /* wrong cylinder => recal */ 1463 drive_state[current_drive].track = NEED_2_RECAL; 1464 return bad; 1465 case 0x80: /* invalid command given */ 1466 DPRINT("Invalid FDC command given!\n"); 1467 cont->done(0); 1468 return 2; 1469 case 0xc0: 1470 DPRINT("Abnormal termination caused by polling\n"); 1471 cont->error(); 1472 return 2; 1473 default: /* (0) Normal command termination */ 1474 return 0; 1475 } 1476 } 1477 1478 /* 1479 * This routine is called when everything should be correctly set up 1480 * for the transfer (i.e. floppy motor is on, the correct floppy is 1481 * selected, and the head is sitting on the right track). 1482 */ 1483 static void setup_rw_floppy(void) 1484 { 1485 int i; 1486 int r; 1487 int flags; 1488 unsigned long ready_date; 1489 void (*function)(void); 1490 1491 flags = raw_cmd->flags; 1492 if (flags & (FD_RAW_READ | FD_RAW_WRITE)) 1493 flags |= FD_RAW_INTR; 1494 1495 if ((flags & FD_RAW_SPIN) && !(flags & FD_RAW_NO_MOTOR)) { 1496 ready_date = drive_state[current_drive].spinup_date + drive_params[current_drive].spinup; 1497 /* If spinup will take a long time, rerun scandrives 1498 * again just before spinup completion. Beware that 1499 * after scandrives, we must again wait for selection. 1500 */ 1501 if (time_after(ready_date, jiffies + drive_params[current_drive].select_delay)) { 1502 ready_date -= drive_params[current_drive].select_delay; 1503 function = floppy_start; 1504 } else 1505 function = setup_rw_floppy; 1506 1507 /* wait until the floppy is spinning fast enough */ 1508 if (fd_wait_for_completion(ready_date, function)) 1509 return; 1510 } 1511 if ((flags & FD_RAW_READ) || (flags & FD_RAW_WRITE)) 1512 setup_DMA(); 1513 1514 if (flags & FD_RAW_INTR) 1515 do_floppy = main_command_interrupt; 1516 1517 r = 0; 1518 for (i = 0; i < raw_cmd->cmd_count; i++) 1519 r |= output_byte(current_fdc, raw_cmd->fullcmd[i]); 1520 1521 debugt(__func__, "rw_command"); 1522 1523 if (r) { 1524 cont->error(); 1525 reset_fdc(); 1526 return; 1527 } 1528 1529 if (!(flags & FD_RAW_INTR)) { 1530 inr = result(current_fdc); 1531 cont->interrupt(); 1532 } else if (flags & FD_RAW_NEED_DISK) 1533 fd_watchdog(); 1534 } 1535 1536 static int blind_seek; 1537 1538 /* 1539 * This is the routine called after every seek (or recalibrate) interrupt 1540 * from the floppy controller. 1541 */ 1542 static void seek_interrupt(void) 1543 { 1544 debugt(__func__, ""); 1545 if (inr != 2 || (reply_buffer[ST0] & 0xF8) != 0x20) { 1546 DPRINT("seek failed\n"); 1547 drive_state[current_drive].track = NEED_2_RECAL; 1548 cont->error(); 1549 cont->redo(); 1550 return; 1551 } 1552 if (drive_state[current_drive].track >= 0 && 1553 drive_state[current_drive].track != reply_buffer[ST1] && 1554 !blind_seek) { 1555 debug_dcl(drive_params[current_drive].flags, 1556 "clearing NEWCHANGE flag because of effective seek\n"); 1557 debug_dcl(drive_params[current_drive].flags, "jiffies=%lu\n", 1558 jiffies); 1559 clear_bit(FD_DISK_NEWCHANGE_BIT, 1560 &drive_state[current_drive].flags); 1561 /* effective seek */ 1562 drive_state[current_drive].select_date = jiffies; 1563 } 1564 drive_state[current_drive].track = reply_buffer[ST1]; 1565 floppy_ready(); 1566 } 1567 1568 static void check_wp(int fdc, int drive) 1569 { 1570 if (test_bit(FD_VERIFY_BIT, &drive_state[drive].flags)) { 1571 /* check write protection */ 1572 output_byte(fdc, FD_GETSTATUS); 1573 output_byte(fdc, UNIT(drive)); 1574 if (result(fdc) != 1) { 1575 fdc_state[fdc].reset = 1; 1576 return; 1577 } 1578 clear_bit(FD_VERIFY_BIT, &drive_state[drive].flags); 1579 clear_bit(FD_NEED_TWADDLE_BIT, 1580 &drive_state[drive].flags); 1581 debug_dcl(drive_params[drive].flags, 1582 "checking whether disk is write protected\n"); 1583 debug_dcl(drive_params[drive].flags, "wp=%x\n", 1584 reply_buffer[ST3] & 0x40); 1585 if (!(reply_buffer[ST3] & 0x40)) 1586 set_bit(FD_DISK_WRITABLE_BIT, 1587 &drive_state[drive].flags); 1588 else 1589 clear_bit(FD_DISK_WRITABLE_BIT, 1590 &drive_state[drive].flags); 1591 } 1592 } 1593 1594 static void seek_floppy(void) 1595 { 1596 int track; 1597 1598 blind_seek = 0; 1599 1600 debug_dcl(drive_params[current_drive].flags, 1601 "calling disk change from %s\n", __func__); 1602 1603 if (!test_bit(FD_DISK_NEWCHANGE_BIT, &drive_state[current_drive].flags) && 1604 disk_change(current_drive) && (raw_cmd->flags & FD_RAW_NEED_DISK)) { 1605 /* the media changed flag should be cleared after the seek. 1606 * If it isn't, this means that there is really no disk in 1607 * the drive. 1608 */ 1609 set_bit(FD_DISK_CHANGED_BIT, 1610 &drive_state[current_drive].flags); 1611 cont->done(0); 1612 cont->redo(); 1613 return; 1614 } 1615 if (drive_state[current_drive].track <= NEED_1_RECAL) { 1616 recalibrate_floppy(); 1617 return; 1618 } else if (test_bit(FD_DISK_NEWCHANGE_BIT, &drive_state[current_drive].flags) && 1619 (raw_cmd->flags & FD_RAW_NEED_DISK) && 1620 (drive_state[current_drive].track <= NO_TRACK || drive_state[current_drive].track == raw_cmd->track)) { 1621 /* we seek to clear the media-changed condition. Does anybody 1622 * know a more elegant way, which works on all drives? */ 1623 if (raw_cmd->track) 1624 track = raw_cmd->track - 1; 1625 else { 1626 if (drive_params[current_drive].flags & FD_SILENT_DCL_CLEAR) { 1627 set_dor(current_fdc, ~(0x10 << UNIT(current_drive)), 0); 1628 blind_seek = 1; 1629 raw_cmd->flags |= FD_RAW_NEED_SEEK; 1630 } 1631 track = 1; 1632 } 1633 } else { 1634 check_wp(current_fdc, current_drive); 1635 if (raw_cmd->track != drive_state[current_drive].track && 1636 (raw_cmd->flags & FD_RAW_NEED_SEEK)) 1637 track = raw_cmd->track; 1638 else { 1639 setup_rw_floppy(); 1640 return; 1641 } 1642 } 1643 1644 do_floppy = seek_interrupt; 1645 output_byte(current_fdc, FD_SEEK); 1646 output_byte(current_fdc, UNIT(current_drive)); 1647 if (output_byte(current_fdc, track) < 0) { 1648 reset_fdc(); 1649 return; 1650 } 1651 debugt(__func__, ""); 1652 } 1653 1654 static void recal_interrupt(void) 1655 { 1656 debugt(__func__, ""); 1657 if (inr != 2) 1658 fdc_state[current_fdc].reset = 1; 1659 else if (reply_buffer[ST0] & ST0_ECE) { 1660 switch (drive_state[current_drive].track) { 1661 case NEED_1_RECAL: 1662 debugt(__func__, "need 1 recal"); 1663 /* after a second recalibrate, we still haven't 1664 * reached track 0. Probably no drive. Raise an 1665 * error, as failing immediately might upset 1666 * computers possessed by the Devil :-) */ 1667 cont->error(); 1668 cont->redo(); 1669 return; 1670 case NEED_2_RECAL: 1671 debugt(__func__, "need 2 recal"); 1672 /* If we already did a recalibrate, 1673 * and we are not at track 0, this 1674 * means we have moved. (The only way 1675 * not to move at recalibration is to 1676 * be already at track 0.) Clear the 1677 * new change flag */ 1678 debug_dcl(drive_params[current_drive].flags, 1679 "clearing NEWCHANGE flag because of second recalibrate\n"); 1680 1681 clear_bit(FD_DISK_NEWCHANGE_BIT, 1682 &drive_state[current_drive].flags); 1683 drive_state[current_drive].select_date = jiffies; 1684 fallthrough; 1685 default: 1686 debugt(__func__, "default"); 1687 /* Recalibrate moves the head by at 1688 * most 80 steps. If after one 1689 * recalibrate we don't have reached 1690 * track 0, this might mean that we 1691 * started beyond track 80. Try 1692 * again. */ 1693 drive_state[current_drive].track = NEED_1_RECAL; 1694 break; 1695 } 1696 } else 1697 drive_state[current_drive].track = reply_buffer[ST1]; 1698 floppy_ready(); 1699 } 1700 1701 static void print_result(char *message, int inr) 1702 { 1703 int i; 1704 1705 DPRINT("%s ", message); 1706 if (inr >= 0) 1707 for (i = 0; i < inr; i++) 1708 pr_cont("repl[%d]=%x ", i, reply_buffer[i]); 1709 pr_cont("\n"); 1710 } 1711 1712 /* interrupt handler. Note that this can be called externally on the Sparc */ 1713 irqreturn_t floppy_interrupt(int irq, void *dev_id) 1714 { 1715 int do_print; 1716 unsigned long f; 1717 void (*handler)(void) = do_floppy; 1718 1719 lasthandler = handler; 1720 interruptjiffies = jiffies; 1721 1722 f = claim_dma_lock(); 1723 fd_disable_dma(); 1724 release_dma_lock(f); 1725 1726 do_floppy = NULL; 1727 if (current_fdc >= N_FDC || fdc_state[current_fdc].address == -1) { 1728 /* we don't even know which FDC is the culprit */ 1729 pr_info("DOR0=%x\n", fdc_state[0].dor); 1730 pr_info("floppy interrupt on bizarre fdc %d\n", current_fdc); 1731 pr_info("handler=%ps\n", handler); 1732 is_alive(__func__, "bizarre fdc"); 1733 return IRQ_NONE; 1734 } 1735 1736 fdc_state[current_fdc].reset = 0; 1737 /* We have to clear the reset flag here, because apparently on boxes 1738 * with level triggered interrupts (PS/2, Sparc, ...), it is needed to 1739 * emit SENSEI's to clear the interrupt line. And fdc_state[fdc].reset 1740 * blocks the emission of the SENSEI's. 1741 * It is OK to emit floppy commands because we are in an interrupt 1742 * handler here, and thus we have to fear no interference of other 1743 * activity. 1744 */ 1745 1746 do_print = !handler && print_unex && initialized; 1747 1748 inr = result(current_fdc); 1749 if (do_print) 1750 print_result("unexpected interrupt", inr); 1751 if (inr == 0) { 1752 int max_sensei = 4; 1753 do { 1754 output_byte(current_fdc, FD_SENSEI); 1755 inr = result(current_fdc); 1756 if (do_print) 1757 print_result("sensei", inr); 1758 max_sensei--; 1759 } while ((reply_buffer[ST0] & 0x83) != UNIT(current_drive) && 1760 inr == 2 && max_sensei); 1761 } 1762 if (!handler) { 1763 fdc_state[current_fdc].reset = 1; 1764 return IRQ_NONE; 1765 } 1766 schedule_bh(handler); 1767 is_alive(__func__, "normal interrupt end"); 1768 1769 /* FIXME! Was it really for us? */ 1770 return IRQ_HANDLED; 1771 } 1772 1773 static void recalibrate_floppy(void) 1774 { 1775 debugt(__func__, ""); 1776 do_floppy = recal_interrupt; 1777 output_byte(current_fdc, FD_RECALIBRATE); 1778 if (output_byte(current_fdc, UNIT(current_drive)) < 0) 1779 reset_fdc(); 1780 } 1781 1782 /* 1783 * Must do 4 FD_SENSEIs after reset because of ``drive polling''. 1784 */ 1785 static void reset_interrupt(void) 1786 { 1787 debugt(__func__, ""); 1788 result(current_fdc); /* get the status ready for set_fdc */ 1789 if (fdc_state[current_fdc].reset) { 1790 pr_info("reset set in interrupt, calling %ps\n", cont->error); 1791 cont->error(); /* a reset just after a reset. BAD! */ 1792 } 1793 cont->redo(); 1794 } 1795 1796 /* 1797 * reset is done by pulling bit 2 of DOR low for a while (old FDCs), 1798 * or by setting the self clearing bit 7 of STATUS (newer FDCs). 1799 * This WILL trigger an interrupt, causing the handlers in the current 1800 * cont's ->redo() to be called via reset_interrupt(). 1801 */ 1802 static void reset_fdc(void) 1803 { 1804 unsigned long flags; 1805 1806 do_floppy = reset_interrupt; 1807 fdc_state[current_fdc].reset = 0; 1808 reset_fdc_info(current_fdc, 0); 1809 1810 /* Pseudo-DMA may intercept 'reset finished' interrupt. */ 1811 /* Irrelevant for systems with true DMA (i386). */ 1812 1813 flags = claim_dma_lock(); 1814 fd_disable_dma(); 1815 release_dma_lock(flags); 1816 1817 if (fdc_state[current_fdc].version >= FDC_82072A) 1818 fdc_outb(0x80 | (fdc_state[current_fdc].dtr & 3), 1819 current_fdc, FD_STATUS); 1820 else { 1821 fdc_outb(fdc_state[current_fdc].dor & ~0x04, current_fdc, FD_DOR); 1822 udelay(FD_RESET_DELAY); 1823 fdc_outb(fdc_state[current_fdc].dor, current_fdc, FD_DOR); 1824 } 1825 } 1826 1827 static void show_floppy(int fdc) 1828 { 1829 int i; 1830 1831 pr_info("\n"); 1832 pr_info("floppy driver state\n"); 1833 pr_info("-------------------\n"); 1834 pr_info("now=%lu last interrupt=%lu diff=%lu last called handler=%ps\n", 1835 jiffies, interruptjiffies, jiffies - interruptjiffies, 1836 lasthandler); 1837 1838 pr_info("timeout_message=%s\n", timeout_message); 1839 pr_info("last output bytes:\n"); 1840 for (i = 0; i < OLOGSIZE; i++) 1841 pr_info("%2x %2x %lu\n", 1842 output_log[(i + output_log_pos) % OLOGSIZE].data, 1843 output_log[(i + output_log_pos) % OLOGSIZE].status, 1844 output_log[(i + output_log_pos) % OLOGSIZE].jiffies); 1845 pr_info("last result at %lu\n", resultjiffies); 1846 pr_info("last redo_fd_request at %lu\n", lastredo); 1847 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1, 1848 reply_buffer, resultsize, true); 1849 1850 pr_info("status=%x\n", fdc_inb(fdc, FD_STATUS)); 1851 pr_info("fdc_busy=%lu\n", fdc_busy); 1852 if (do_floppy) 1853 pr_info("do_floppy=%ps\n", do_floppy); 1854 if (work_pending(&floppy_work)) 1855 pr_info("floppy_work.func=%ps\n", floppy_work.func); 1856 if (delayed_work_pending(&fd_timer)) 1857 pr_info("delayed work.function=%p expires=%ld\n", 1858 fd_timer.work.func, 1859 fd_timer.timer.expires - jiffies); 1860 if (delayed_work_pending(&fd_timeout)) 1861 pr_info("timer_function=%p expires=%ld\n", 1862 fd_timeout.work.func, 1863 fd_timeout.timer.expires - jiffies); 1864 1865 pr_info("cont=%p\n", cont); 1866 pr_info("current_req=%p\n", current_req); 1867 pr_info("command_status=%d\n", command_status); 1868 pr_info("\n"); 1869 } 1870 1871 static void floppy_shutdown(struct work_struct *arg) 1872 { 1873 unsigned long flags; 1874 1875 if (initialized) 1876 show_floppy(current_fdc); 1877 cancel_activity(); 1878 1879 flags = claim_dma_lock(); 1880 fd_disable_dma(); 1881 release_dma_lock(flags); 1882 1883 /* avoid dma going to a random drive after shutdown */ 1884 1885 if (initialized) 1886 DPRINT("floppy timeout called\n"); 1887 fdc_state[current_fdc].reset = 1; 1888 if (cont) { 1889 cont->done(0); 1890 cont->redo(); /* this will recall reset when needed */ 1891 } else { 1892 pr_info("no cont in shutdown!\n"); 1893 process_fd_request(); 1894 } 1895 is_alive(__func__, ""); 1896 } 1897 1898 /* start motor, check media-changed condition and write protection */ 1899 static int start_motor(void (*function)(void)) 1900 { 1901 int mask; 1902 int data; 1903 1904 mask = 0xfc; 1905 data = UNIT(current_drive); 1906 if (!(raw_cmd->flags & FD_RAW_NO_MOTOR)) { 1907 if (!(fdc_state[current_fdc].dor & (0x10 << UNIT(current_drive)))) { 1908 set_debugt(); 1909 /* no read since this drive is running */ 1910 drive_state[current_drive].first_read_date = 0; 1911 /* note motor start time if motor is not yet running */ 1912 drive_state[current_drive].spinup_date = jiffies; 1913 data |= (0x10 << UNIT(current_drive)); 1914 } 1915 } else if (fdc_state[current_fdc].dor & (0x10 << UNIT(current_drive))) 1916 mask &= ~(0x10 << UNIT(current_drive)); 1917 1918 /* starts motor and selects floppy */ 1919 del_timer(motor_off_timer + current_drive); 1920 set_dor(current_fdc, mask, data); 1921 1922 /* wait_for_completion also schedules reset if needed. */ 1923 return fd_wait_for_completion(drive_state[current_drive].select_date + drive_params[current_drive].select_delay, 1924 function); 1925 } 1926 1927 static void floppy_ready(void) 1928 { 1929 if (fdc_state[current_fdc].reset) { 1930 reset_fdc(); 1931 return; 1932 } 1933 if (start_motor(floppy_ready)) 1934 return; 1935 if (fdc_dtr()) 1936 return; 1937 1938 debug_dcl(drive_params[current_drive].flags, 1939 "calling disk change from floppy_ready\n"); 1940 if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) && 1941 disk_change(current_drive) && !drive_params[current_drive].select_delay) 1942 twaddle(current_fdc, current_drive); /* this clears the dcl on certain 1943 * drive/controller combinations */ 1944 1945 #ifdef fd_chose_dma_mode 1946 if ((raw_cmd->flags & FD_RAW_READ) || (raw_cmd->flags & FD_RAW_WRITE)) { 1947 unsigned long flags = claim_dma_lock(); 1948 fd_chose_dma_mode(raw_cmd->kernel_data, raw_cmd->length); 1949 release_dma_lock(flags); 1950 } 1951 #endif 1952 1953 if (raw_cmd->flags & (FD_RAW_NEED_SEEK | FD_RAW_NEED_DISK)) { 1954 perpendicular_mode(current_fdc); 1955 fdc_specify(current_fdc, current_drive); /* must be done here because of hut, hlt ... */ 1956 seek_floppy(); 1957 } else { 1958 if ((raw_cmd->flags & FD_RAW_READ) || 1959 (raw_cmd->flags & FD_RAW_WRITE)) 1960 fdc_specify(current_fdc, current_drive); 1961 setup_rw_floppy(); 1962 } 1963 } 1964 1965 static void floppy_start(void) 1966 { 1967 reschedule_timeout(current_drive, "floppy start"); 1968 1969 scandrives(); 1970 debug_dcl(drive_params[current_drive].flags, 1971 "setting NEWCHANGE in floppy_start\n"); 1972 set_bit(FD_DISK_NEWCHANGE_BIT, &drive_state[current_drive].flags); 1973 floppy_ready(); 1974 } 1975 1976 /* 1977 * ======================================================================== 1978 * here ends the bottom half. Exported routines are: 1979 * floppy_start, floppy_off, floppy_ready, lock_fdc, unlock_fdc, set_fdc, 1980 * start_motor, reset_fdc, reset_fdc_info, interpret_errors. 1981 * Initialization also uses output_byte, result, set_dor, floppy_interrupt 1982 * and set_dor. 1983 * ======================================================================== 1984 */ 1985 /* 1986 * General purpose continuations. 1987 * ============================== 1988 */ 1989 1990 static void do_wakeup(void) 1991 { 1992 reschedule_timeout(MAXTIMEOUT, "do wakeup"); 1993 cont = NULL; 1994 command_status += 2; 1995 wake_up(&command_done); 1996 } 1997 1998 static const struct cont_t wakeup_cont = { 1999 .interrupt = empty, 2000 .redo = do_wakeup, 2001 .error = empty, 2002 .done = (done_f)empty 2003 }; 2004 2005 static const struct cont_t intr_cont = { 2006 .interrupt = empty, 2007 .redo = process_fd_request, 2008 .error = empty, 2009 .done = (done_f)empty 2010 }; 2011 2012 /* schedules handler, waiting for completion. May be interrupted, will then 2013 * return -EINTR, in which case the driver will automatically be unlocked. 2014 */ 2015 static int wait_til_done(void (*handler)(void), bool interruptible) 2016 { 2017 int ret; 2018 2019 schedule_bh(handler); 2020 2021 if (interruptible) 2022 wait_event_interruptible(command_done, command_status >= 2); 2023 else 2024 wait_event(command_done, command_status >= 2); 2025 2026 if (command_status < 2) { 2027 cancel_activity(); 2028 cont = &intr_cont; 2029 reset_fdc(); 2030 return -EINTR; 2031 } 2032 2033 if (fdc_state[current_fdc].reset) 2034 command_status = FD_COMMAND_ERROR; 2035 if (command_status == FD_COMMAND_OKAY) 2036 ret = 0; 2037 else 2038 ret = -EIO; 2039 command_status = FD_COMMAND_NONE; 2040 return ret; 2041 } 2042 2043 static void generic_done(int result) 2044 { 2045 command_status = result; 2046 cont = &wakeup_cont; 2047 } 2048 2049 static void generic_success(void) 2050 { 2051 cont->done(1); 2052 } 2053 2054 static void generic_failure(void) 2055 { 2056 cont->done(0); 2057 } 2058 2059 static void success_and_wakeup(void) 2060 { 2061 generic_success(); 2062 cont->redo(); 2063 } 2064 2065 /* 2066 * formatting and rw support. 2067 * ========================== 2068 */ 2069 2070 static int next_valid_format(int drive) 2071 { 2072 int probed_format; 2073 2074 probed_format = drive_state[drive].probed_format; 2075 while (1) { 2076 if (probed_format >= FD_AUTODETECT_SIZE || 2077 !drive_params[drive].autodetect[probed_format]) { 2078 drive_state[drive].probed_format = 0; 2079 return 1; 2080 } 2081 if (floppy_type[drive_params[drive].autodetect[probed_format]].sect) { 2082 drive_state[drive].probed_format = probed_format; 2083 return 0; 2084 } 2085 probed_format++; 2086 } 2087 } 2088 2089 static void bad_flp_intr(void) 2090 { 2091 int err_count; 2092 2093 if (probing) { 2094 drive_state[current_drive].probed_format++; 2095 if (!next_valid_format(current_drive)) 2096 return; 2097 } 2098 err_count = ++(*errors); 2099 INFBOUND(write_errors[current_drive].badness, err_count); 2100 if (err_count > drive_params[current_drive].max_errors.abort) 2101 cont->done(0); 2102 if (err_count > drive_params[current_drive].max_errors.reset) 2103 fdc_state[current_fdc].reset = 1; 2104 else if (err_count > drive_params[current_drive].max_errors.recal) 2105 drive_state[current_drive].track = NEED_2_RECAL; 2106 } 2107 2108 static void set_floppy(int drive) 2109 { 2110 int type = ITYPE(drive_state[drive].fd_device); 2111 2112 if (type) 2113 _floppy = floppy_type + type; 2114 else 2115 _floppy = current_type[drive]; 2116 } 2117 2118 /* 2119 * formatting support. 2120 * =================== 2121 */ 2122 static void format_interrupt(void) 2123 { 2124 switch (interpret_errors()) { 2125 case 1: 2126 cont->error(); 2127 break; 2128 case 2: 2129 break; 2130 case 0: 2131 cont->done(1); 2132 } 2133 cont->redo(); 2134 } 2135 2136 #define FM_MODE(x, y) ((y) & ~(((x)->rate & 0x80) >> 1)) 2137 #define CT(x) ((x) | 0xc0) 2138 2139 static void setup_format_params(int track) 2140 { 2141 int n; 2142 int il; 2143 int count; 2144 int head_shift; 2145 int track_shift; 2146 struct fparm { 2147 unsigned char track, head, sect, size; 2148 } *here = (struct fparm *)floppy_track_buffer; 2149 2150 raw_cmd = &default_raw_cmd; 2151 raw_cmd->track = track; 2152 2153 raw_cmd->flags = (FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN | 2154 FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK); 2155 raw_cmd->rate = _floppy->rate & 0x43; 2156 raw_cmd->cmd_count = NR_F; 2157 raw_cmd->cmd[COMMAND] = FM_MODE(_floppy, FD_FORMAT); 2158 raw_cmd->cmd[DR_SELECT] = UNIT(current_drive) + PH_HEAD(_floppy, format_req.head); 2159 raw_cmd->cmd[F_SIZECODE] = FD_SIZECODE(_floppy); 2160 raw_cmd->cmd[F_SECT_PER_TRACK] = _floppy->sect << 2 >> raw_cmd->cmd[F_SIZECODE]; 2161 raw_cmd->cmd[F_GAP] = _floppy->fmt_gap; 2162 raw_cmd->cmd[F_FILL] = FD_FILL_BYTE; 2163 2164 raw_cmd->kernel_data = floppy_track_buffer; 2165 raw_cmd->length = 4 * raw_cmd->cmd[F_SECT_PER_TRACK]; 2166 2167 if (!raw_cmd->cmd[F_SECT_PER_TRACK]) 2168 return; 2169 2170 /* allow for about 30ms for data transport per track */ 2171 head_shift = (raw_cmd->cmd[F_SECT_PER_TRACK] + 5) / 6; 2172 2173 /* a ``cylinder'' is two tracks plus a little stepping time */ 2174 track_shift = 2 * head_shift + 3; 2175 2176 /* position of logical sector 1 on this track */ 2177 n = (track_shift * format_req.track + head_shift * format_req.head) 2178 % raw_cmd->cmd[F_SECT_PER_TRACK]; 2179 2180 /* determine interleave */ 2181 il = 1; 2182 if (_floppy->fmt_gap < 0x22) 2183 il++; 2184 2185 /* initialize field */ 2186 for (count = 0; count < raw_cmd->cmd[F_SECT_PER_TRACK]; ++count) { 2187 here[count].track = format_req.track; 2188 here[count].head = format_req.head; 2189 here[count].sect = 0; 2190 here[count].size = raw_cmd->cmd[F_SIZECODE]; 2191 } 2192 /* place logical sectors */ 2193 for (count = 1; count <= raw_cmd->cmd[F_SECT_PER_TRACK]; ++count) { 2194 here[n].sect = count; 2195 n = (n + il) % raw_cmd->cmd[F_SECT_PER_TRACK]; 2196 if (here[n].sect) { /* sector busy, find next free sector */ 2197 ++n; 2198 if (n >= raw_cmd->cmd[F_SECT_PER_TRACK]) { 2199 n -= raw_cmd->cmd[F_SECT_PER_TRACK]; 2200 while (here[n].sect) 2201 ++n; 2202 } 2203 } 2204 } 2205 if (_floppy->stretch & FD_SECTBASEMASK) { 2206 for (count = 0; count < raw_cmd->cmd[F_SECT_PER_TRACK]; count++) 2207 here[count].sect += FD_SECTBASE(_floppy) - 1; 2208 } 2209 } 2210 2211 static void redo_format(void) 2212 { 2213 buffer_track = -1; 2214 setup_format_params(format_req.track << STRETCH(_floppy)); 2215 floppy_start(); 2216 debugt(__func__, "queue format request"); 2217 } 2218 2219 static const struct cont_t format_cont = { 2220 .interrupt = format_interrupt, 2221 .redo = redo_format, 2222 .error = bad_flp_intr, 2223 .done = generic_done 2224 }; 2225 2226 static int do_format(int drive, struct format_descr *tmp_format_req) 2227 { 2228 int ret; 2229 2230 if (lock_fdc(drive)) 2231 return -EINTR; 2232 2233 set_floppy(drive); 2234 if (!_floppy || 2235 _floppy->track > drive_params[current_drive].tracks || 2236 tmp_format_req->track >= _floppy->track || 2237 tmp_format_req->head >= _floppy->head || 2238 (_floppy->sect << 2) % (1 << FD_SIZECODE(_floppy)) || 2239 !_floppy->fmt_gap) { 2240 process_fd_request(); 2241 return -EINVAL; 2242 } 2243 format_req = *tmp_format_req; 2244 format_errors = 0; 2245 cont = &format_cont; 2246 errors = &format_errors; 2247 ret = wait_til_done(redo_format, true); 2248 if (ret == -EINTR) 2249 return -EINTR; 2250 process_fd_request(); 2251 return ret; 2252 } 2253 2254 /* 2255 * Buffer read/write and support 2256 * ============================= 2257 */ 2258 2259 static void floppy_end_request(struct request *req, blk_status_t error) 2260 { 2261 unsigned int nr_sectors = current_count_sectors; 2262 unsigned int drive = (unsigned long)req->q->disk->private_data; 2263 2264 /* current_count_sectors can be zero if transfer failed */ 2265 if (error) 2266 nr_sectors = blk_rq_cur_sectors(req); 2267 if (blk_update_request(req, error, nr_sectors << 9)) 2268 return; 2269 __blk_mq_end_request(req, error); 2270 2271 /* We're done with the request */ 2272 floppy_off(drive); 2273 current_req = NULL; 2274 } 2275 2276 /* new request_done. Can handle physical sectors which are smaller than a 2277 * logical buffer */ 2278 static void request_done(int uptodate) 2279 { 2280 struct request *req = current_req; 2281 int block; 2282 char msg[sizeof("request done ") + sizeof(int) * 3]; 2283 2284 probing = 0; 2285 snprintf(msg, sizeof(msg), "request done %d", uptodate); 2286 reschedule_timeout(MAXTIMEOUT, msg); 2287 2288 if (!req) { 2289 pr_info("floppy.c: no request in request_done\n"); 2290 return; 2291 } 2292 2293 if (uptodate) { 2294 /* maintain values for invalidation on geometry 2295 * change */ 2296 block = current_count_sectors + blk_rq_pos(req); 2297 INFBOUND(drive_state[current_drive].maxblock, block); 2298 if (block > _floppy->sect) 2299 drive_state[current_drive].maxtrack = 1; 2300 2301 floppy_end_request(req, 0); 2302 } else { 2303 if (rq_data_dir(req) == WRITE) { 2304 /* record write error information */ 2305 write_errors[current_drive].write_errors++; 2306 if (write_errors[current_drive].write_errors == 1) { 2307 write_errors[current_drive].first_error_sector = blk_rq_pos(req); 2308 write_errors[current_drive].first_error_generation = drive_state[current_drive].generation; 2309 } 2310 write_errors[current_drive].last_error_sector = blk_rq_pos(req); 2311 write_errors[current_drive].last_error_generation = drive_state[current_drive].generation; 2312 } 2313 floppy_end_request(req, BLK_STS_IOERR); 2314 } 2315 } 2316 2317 /* Interrupt handler evaluating the result of the r/w operation */ 2318 static void rw_interrupt(void) 2319 { 2320 int eoc; 2321 int ssize; 2322 int heads; 2323 int nr_sectors; 2324 2325 if (reply_buffer[R_HEAD] >= 2) { 2326 /* some Toshiba floppy controllers occasionnally seem to 2327 * return bogus interrupts after read/write operations, which 2328 * can be recognized by a bad head number (>= 2) */ 2329 return; 2330 } 2331 2332 if (!drive_state[current_drive].first_read_date) 2333 drive_state[current_drive].first_read_date = jiffies; 2334 2335 ssize = DIV_ROUND_UP(1 << raw_cmd->cmd[SIZECODE], 4); 2336 2337 if (reply_buffer[ST1] & ST1_EOC) 2338 eoc = 1; 2339 else 2340 eoc = 0; 2341 2342 if (raw_cmd->cmd[COMMAND] & 0x80) 2343 heads = 2; 2344 else 2345 heads = 1; 2346 2347 nr_sectors = (((reply_buffer[R_TRACK] - raw_cmd->cmd[TRACK]) * heads + 2348 reply_buffer[R_HEAD] - raw_cmd->cmd[HEAD]) * raw_cmd->cmd[SECT_PER_TRACK] + 2349 reply_buffer[R_SECTOR] - raw_cmd->cmd[SECTOR] + eoc) << raw_cmd->cmd[SIZECODE] >> 2; 2350 2351 if (nr_sectors / ssize > 2352 DIV_ROUND_UP(in_sector_offset + current_count_sectors, ssize)) { 2353 DPRINT("long rw: %x instead of %lx\n", 2354 nr_sectors, current_count_sectors); 2355 pr_info("rs=%d s=%d\n", reply_buffer[R_SECTOR], 2356 raw_cmd->cmd[SECTOR]); 2357 pr_info("rh=%d h=%d\n", reply_buffer[R_HEAD], 2358 raw_cmd->cmd[HEAD]); 2359 pr_info("rt=%d t=%d\n", reply_buffer[R_TRACK], 2360 raw_cmd->cmd[TRACK]); 2361 pr_info("heads=%d eoc=%d\n", heads, eoc); 2362 pr_info("spt=%d st=%d ss=%d\n", 2363 raw_cmd->cmd[SECT_PER_TRACK], fsector_t, ssize); 2364 pr_info("in_sector_offset=%d\n", in_sector_offset); 2365 } 2366 2367 nr_sectors -= in_sector_offset; 2368 INFBOUND(nr_sectors, 0); 2369 SUPBOUND(current_count_sectors, nr_sectors); 2370 2371 switch (interpret_errors()) { 2372 case 2: 2373 cont->redo(); 2374 return; 2375 case 1: 2376 if (!current_count_sectors) { 2377 cont->error(); 2378 cont->redo(); 2379 return; 2380 } 2381 break; 2382 case 0: 2383 if (!current_count_sectors) { 2384 cont->redo(); 2385 return; 2386 } 2387 current_type[current_drive] = _floppy; 2388 floppy_sizes[TOMINOR(current_drive)] = _floppy->size; 2389 break; 2390 } 2391 2392 if (probing) { 2393 if (drive_params[current_drive].flags & FTD_MSG) 2394 DPRINT("Auto-detected floppy type %s in fd%d\n", 2395 _floppy->name, current_drive); 2396 current_type[current_drive] = _floppy; 2397 floppy_sizes[TOMINOR(current_drive)] = _floppy->size; 2398 probing = 0; 2399 } 2400 2401 if (CT(raw_cmd->cmd[COMMAND]) != FD_READ) { 2402 /* transfer directly from buffer */ 2403 cont->done(1); 2404 } else { 2405 buffer_track = raw_cmd->track; 2406 buffer_drive = current_drive; 2407 INFBOUND(buffer_max, nr_sectors + fsector_t); 2408 } 2409 cont->redo(); 2410 } 2411 2412 /* Compute the maximal transfer size */ 2413 static int transfer_size(int ssize, int max_sector, int max_size) 2414 { 2415 SUPBOUND(max_sector, fsector_t + max_size); 2416 2417 /* alignment */ 2418 max_sector -= (max_sector % _floppy->sect) % ssize; 2419 2420 /* transfer size, beginning not aligned */ 2421 current_count_sectors = max_sector - fsector_t; 2422 2423 return max_sector; 2424 } 2425 2426 /* 2427 * Move data from/to the track buffer to/from the buffer cache. 2428 */ 2429 static void copy_buffer(int ssize, int max_sector, int max_sector_2) 2430 { 2431 int remaining; /* number of transferred 512-byte sectors */ 2432 struct bio_vec bv; 2433 char *dma_buffer; 2434 int size; 2435 struct req_iterator iter; 2436 2437 max_sector = transfer_size(ssize, 2438 min(max_sector, max_sector_2), 2439 blk_rq_sectors(current_req)); 2440 2441 if (current_count_sectors <= 0 && CT(raw_cmd->cmd[COMMAND]) == FD_WRITE && 2442 buffer_max > fsector_t + blk_rq_sectors(current_req)) 2443 current_count_sectors = min_t(int, buffer_max - fsector_t, 2444 blk_rq_sectors(current_req)); 2445 2446 remaining = current_count_sectors << 9; 2447 if (remaining > blk_rq_bytes(current_req) && CT(raw_cmd->cmd[COMMAND]) == FD_WRITE) { 2448 DPRINT("in copy buffer\n"); 2449 pr_info("current_count_sectors=%ld\n", current_count_sectors); 2450 pr_info("remaining=%d\n", remaining >> 9); 2451 pr_info("current_req->nr_sectors=%u\n", 2452 blk_rq_sectors(current_req)); 2453 pr_info("current_req->current_nr_sectors=%u\n", 2454 blk_rq_cur_sectors(current_req)); 2455 pr_info("max_sector=%d\n", max_sector); 2456 pr_info("ssize=%d\n", ssize); 2457 } 2458 2459 buffer_max = max(max_sector, buffer_max); 2460 2461 dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9); 2462 2463 size = blk_rq_cur_bytes(current_req); 2464 2465 rq_for_each_segment(bv, current_req, iter) { 2466 if (!remaining) 2467 break; 2468 2469 size = bv.bv_len; 2470 SUPBOUND(size, remaining); 2471 if (dma_buffer + size > 2472 floppy_track_buffer + (max_buffer_sectors << 10) || 2473 dma_buffer < floppy_track_buffer) { 2474 DPRINT("buffer overrun in copy buffer %d\n", 2475 (int)((floppy_track_buffer - dma_buffer) >> 9)); 2476 pr_info("fsector_t=%d buffer_min=%d\n", 2477 fsector_t, buffer_min); 2478 pr_info("current_count_sectors=%ld\n", 2479 current_count_sectors); 2480 if (CT(raw_cmd->cmd[COMMAND]) == FD_READ) 2481 pr_info("read\n"); 2482 if (CT(raw_cmd->cmd[COMMAND]) == FD_WRITE) 2483 pr_info("write\n"); 2484 break; 2485 } 2486 2487 if (CT(raw_cmd->cmd[COMMAND]) == FD_READ) 2488 memcpy_to_bvec(&bv, dma_buffer); 2489 else 2490 memcpy_from_bvec(dma_buffer, &bv); 2491 2492 remaining -= size; 2493 dma_buffer += size; 2494 } 2495 if (remaining) { 2496 if (remaining > 0) 2497 max_sector -= remaining >> 9; 2498 DPRINT("weirdness: remaining %d\n", remaining >> 9); 2499 } 2500 } 2501 2502 /* work around a bug in pseudo DMA 2503 * (on some FDCs) pseudo DMA does not stop when the CPU stops 2504 * sending data. Hence we need a different way to signal the 2505 * transfer length: We use raw_cmd->cmd[SECT_PER_TRACK]. Unfortunately, this 2506 * does not work with MT, hence we can only transfer one head at 2507 * a time 2508 */ 2509 static void virtualdmabug_workaround(void) 2510 { 2511 int hard_sectors; 2512 int end_sector; 2513 2514 if (CT(raw_cmd->cmd[COMMAND]) == FD_WRITE) { 2515 raw_cmd->cmd[COMMAND] &= ~0x80; /* switch off multiple track mode */ 2516 2517 hard_sectors = raw_cmd->length >> (7 + raw_cmd->cmd[SIZECODE]); 2518 end_sector = raw_cmd->cmd[SECTOR] + hard_sectors - 1; 2519 if (end_sector > raw_cmd->cmd[SECT_PER_TRACK]) { 2520 pr_info("too many sectors %d > %d\n", 2521 end_sector, raw_cmd->cmd[SECT_PER_TRACK]); 2522 return; 2523 } 2524 raw_cmd->cmd[SECT_PER_TRACK] = end_sector; 2525 /* make sure raw_cmd->cmd[SECT_PER_TRACK] 2526 * points to end of transfer */ 2527 } 2528 } 2529 2530 /* 2531 * Formulate a read/write request. 2532 * this routine decides where to load the data (directly to buffer, or to 2533 * tmp floppy area), how much data to load (the size of the buffer, the whole 2534 * track, or a single sector) 2535 * All floppy_track_buffer handling goes in here. If we ever add track buffer 2536 * allocation on the fly, it should be done here. No other part should need 2537 * modification. 2538 */ 2539 2540 static int make_raw_rw_request(void) 2541 { 2542 int aligned_sector_t; 2543 int max_sector; 2544 int max_size; 2545 int tracksize; 2546 int ssize; 2547 2548 if (WARN(max_buffer_sectors == 0, "VFS: Block I/O scheduled on unopened device\n")) 2549 return 0; 2550 2551 set_fdc((long)current_req->q->disk->private_data); 2552 2553 raw_cmd = &default_raw_cmd; 2554 raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK; 2555 raw_cmd->cmd_count = NR_RW; 2556 if (rq_data_dir(current_req) == READ) { 2557 raw_cmd->flags |= FD_RAW_READ; 2558 raw_cmd->cmd[COMMAND] = FM_MODE(_floppy, FD_READ); 2559 } else if (rq_data_dir(current_req) == WRITE) { 2560 raw_cmd->flags |= FD_RAW_WRITE; 2561 raw_cmd->cmd[COMMAND] = FM_MODE(_floppy, FD_WRITE); 2562 } else { 2563 DPRINT("%s: unknown command\n", __func__); 2564 return 0; 2565 } 2566 2567 max_sector = _floppy->sect * _floppy->head; 2568 2569 raw_cmd->cmd[TRACK] = (int)blk_rq_pos(current_req) / max_sector; 2570 fsector_t = (int)blk_rq_pos(current_req) % max_sector; 2571 if (_floppy->track && raw_cmd->cmd[TRACK] >= _floppy->track) { 2572 if (blk_rq_cur_sectors(current_req) & 1) { 2573 current_count_sectors = 1; 2574 return 1; 2575 } else 2576 return 0; 2577 } 2578 raw_cmd->cmd[HEAD] = fsector_t / _floppy->sect; 2579 2580 if (((_floppy->stretch & (FD_SWAPSIDES | FD_SECTBASEMASK)) || 2581 test_bit(FD_NEED_TWADDLE_BIT, &drive_state[current_drive].flags)) && 2582 fsector_t < _floppy->sect) 2583 max_sector = _floppy->sect; 2584 2585 /* 2M disks have phantom sectors on the first track */ 2586 if ((_floppy->rate & FD_2M) && (!raw_cmd->cmd[TRACK]) && (!raw_cmd->cmd[HEAD])) { 2587 max_sector = 2 * _floppy->sect / 3; 2588 if (fsector_t >= max_sector) { 2589 current_count_sectors = 2590 min_t(int, _floppy->sect - fsector_t, 2591 blk_rq_sectors(current_req)); 2592 return 1; 2593 } 2594 raw_cmd->cmd[SIZECODE] = 2; 2595 } else 2596 raw_cmd->cmd[SIZECODE] = FD_SIZECODE(_floppy); 2597 raw_cmd->rate = _floppy->rate & 0x43; 2598 if ((_floppy->rate & FD_2M) && 2599 (raw_cmd->cmd[TRACK] || raw_cmd->cmd[HEAD]) && raw_cmd->rate == 2) 2600 raw_cmd->rate = 1; 2601 2602 if (raw_cmd->cmd[SIZECODE]) 2603 raw_cmd->cmd[SIZECODE2] = 0xff; 2604 else 2605 raw_cmd->cmd[SIZECODE2] = 0x80; 2606 raw_cmd->track = raw_cmd->cmd[TRACK] << STRETCH(_floppy); 2607 raw_cmd->cmd[DR_SELECT] = UNIT(current_drive) + PH_HEAD(_floppy, raw_cmd->cmd[HEAD]); 2608 raw_cmd->cmd[GAP] = _floppy->gap; 2609 ssize = DIV_ROUND_UP(1 << raw_cmd->cmd[SIZECODE], 4); 2610 raw_cmd->cmd[SECT_PER_TRACK] = _floppy->sect << 2 >> raw_cmd->cmd[SIZECODE]; 2611 raw_cmd->cmd[SECTOR] = ((fsector_t % _floppy->sect) << 2 >> raw_cmd->cmd[SIZECODE]) + 2612 FD_SECTBASE(_floppy); 2613 2614 /* tracksize describes the size which can be filled up with sectors 2615 * of size ssize. 2616 */ 2617 tracksize = _floppy->sect - _floppy->sect % ssize; 2618 if (tracksize < _floppy->sect) { 2619 raw_cmd->cmd[SECT_PER_TRACK]++; 2620 if (tracksize <= fsector_t % _floppy->sect) 2621 raw_cmd->cmd[SECTOR]--; 2622 2623 /* if we are beyond tracksize, fill up using smaller sectors */ 2624 while (tracksize <= fsector_t % _floppy->sect) { 2625 while (tracksize + ssize > _floppy->sect) { 2626 raw_cmd->cmd[SIZECODE]--; 2627 ssize >>= 1; 2628 } 2629 raw_cmd->cmd[SECTOR]++; 2630 raw_cmd->cmd[SECT_PER_TRACK]++; 2631 tracksize += ssize; 2632 } 2633 max_sector = raw_cmd->cmd[HEAD] * _floppy->sect + tracksize; 2634 } else if (!raw_cmd->cmd[TRACK] && !raw_cmd->cmd[HEAD] && !(_floppy->rate & FD_2M) && probing) { 2635 max_sector = _floppy->sect; 2636 } else if (!raw_cmd->cmd[HEAD] && CT(raw_cmd->cmd[COMMAND]) == FD_WRITE) { 2637 /* for virtual DMA bug workaround */ 2638 max_sector = _floppy->sect; 2639 } 2640 2641 in_sector_offset = (fsector_t % _floppy->sect) % ssize; 2642 aligned_sector_t = fsector_t - in_sector_offset; 2643 max_size = blk_rq_sectors(current_req); 2644 if ((raw_cmd->track == buffer_track) && 2645 (current_drive == buffer_drive) && 2646 (fsector_t >= buffer_min) && (fsector_t < buffer_max)) { 2647 /* data already in track buffer */ 2648 if (CT(raw_cmd->cmd[COMMAND]) == FD_READ) { 2649 copy_buffer(1, max_sector, buffer_max); 2650 return 1; 2651 } 2652 } else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) { 2653 if (CT(raw_cmd->cmd[COMMAND]) == FD_WRITE) { 2654 unsigned int sectors; 2655 2656 sectors = fsector_t + blk_rq_sectors(current_req); 2657 if (sectors > ssize && sectors < ssize + ssize) 2658 max_size = ssize + ssize; 2659 else 2660 max_size = ssize; 2661 } 2662 raw_cmd->flags &= ~FD_RAW_WRITE; 2663 raw_cmd->flags |= FD_RAW_READ; 2664 raw_cmd->cmd[COMMAND] = FM_MODE(_floppy, FD_READ); 2665 } 2666 2667 if (CT(raw_cmd->cmd[COMMAND]) == FD_READ) 2668 max_size = max_sector; /* unbounded */ 2669 2670 /* claim buffer track if needed */ 2671 if (buffer_track != raw_cmd->track || /* bad track */ 2672 buffer_drive != current_drive || /* bad drive */ 2673 fsector_t > buffer_max || 2674 fsector_t < buffer_min || 2675 ((CT(raw_cmd->cmd[COMMAND]) == FD_READ || 2676 (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) && 2677 max_sector > 2 * max_buffer_sectors + buffer_min && 2678 max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)) { 2679 /* not enough space */ 2680 buffer_track = -1; 2681 buffer_drive = current_drive; 2682 buffer_max = buffer_min = aligned_sector_t; 2683 } 2684 raw_cmd->kernel_data = floppy_track_buffer + 2685 ((aligned_sector_t - buffer_min) << 9); 2686 2687 if (CT(raw_cmd->cmd[COMMAND]) == FD_WRITE) { 2688 /* copy write buffer to track buffer. 2689 * if we get here, we know that the write 2690 * is either aligned or the data already in the buffer 2691 * (buffer will be overwritten) */ 2692 if (in_sector_offset && buffer_track == -1) 2693 DPRINT("internal error offset !=0 on write\n"); 2694 buffer_track = raw_cmd->track; 2695 buffer_drive = current_drive; 2696 copy_buffer(ssize, max_sector, 2697 2 * max_buffer_sectors + buffer_min); 2698 } else 2699 transfer_size(ssize, max_sector, 2700 2 * max_buffer_sectors + buffer_min - 2701 aligned_sector_t); 2702 2703 /* round up current_count_sectors to get dma xfer size */ 2704 raw_cmd->length = in_sector_offset + current_count_sectors; 2705 raw_cmd->length = ((raw_cmd->length - 1) | (ssize - 1)) + 1; 2706 raw_cmd->length <<= 9; 2707 if ((raw_cmd->length < current_count_sectors << 9) || 2708 (CT(raw_cmd->cmd[COMMAND]) == FD_WRITE && 2709 (aligned_sector_t + (raw_cmd->length >> 9) > buffer_max || 2710 aligned_sector_t < buffer_min)) || 2711 raw_cmd->length % (128 << raw_cmd->cmd[SIZECODE]) || 2712 raw_cmd->length <= 0 || current_count_sectors <= 0) { 2713 DPRINT("fractionary current count b=%lx s=%lx\n", 2714 raw_cmd->length, current_count_sectors); 2715 pr_info("addr=%d, length=%ld\n", 2716 (int)((raw_cmd->kernel_data - 2717 floppy_track_buffer) >> 9), 2718 current_count_sectors); 2719 pr_info("st=%d ast=%d mse=%d msi=%d\n", 2720 fsector_t, aligned_sector_t, max_sector, max_size); 2721 pr_info("ssize=%x SIZECODE=%d\n", ssize, raw_cmd->cmd[SIZECODE]); 2722 pr_info("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n", 2723 raw_cmd->cmd[COMMAND], raw_cmd->cmd[SECTOR], 2724 raw_cmd->cmd[HEAD], raw_cmd->cmd[TRACK]); 2725 pr_info("buffer drive=%d\n", buffer_drive); 2726 pr_info("buffer track=%d\n", buffer_track); 2727 pr_info("buffer_min=%d\n", buffer_min); 2728 pr_info("buffer_max=%d\n", buffer_max); 2729 return 0; 2730 } 2731 2732 if (raw_cmd->kernel_data < floppy_track_buffer || 2733 current_count_sectors < 0 || 2734 raw_cmd->length < 0 || 2735 raw_cmd->kernel_data + raw_cmd->length > 2736 floppy_track_buffer + (max_buffer_sectors << 10)) { 2737 DPRINT("buffer overrun in schedule dma\n"); 2738 pr_info("fsector_t=%d buffer_min=%d current_count=%ld\n", 2739 fsector_t, buffer_min, raw_cmd->length >> 9); 2740 pr_info("current_count_sectors=%ld\n", 2741 current_count_sectors); 2742 if (CT(raw_cmd->cmd[COMMAND]) == FD_READ) 2743 pr_info("read\n"); 2744 if (CT(raw_cmd->cmd[COMMAND]) == FD_WRITE) 2745 pr_info("write\n"); 2746 return 0; 2747 } 2748 if (raw_cmd->length == 0) { 2749 DPRINT("zero dma transfer attempted from make_raw_request\n"); 2750 return 0; 2751 } 2752 2753 virtualdmabug_workaround(); 2754 return 2; 2755 } 2756 2757 static int set_next_request(void) 2758 { 2759 current_req = list_first_entry_or_null(&floppy_reqs, struct request, 2760 queuelist); 2761 if (current_req) { 2762 current_req->error_count = 0; 2763 list_del_init(¤t_req->queuelist); 2764 } 2765 return current_req != NULL; 2766 } 2767 2768 /* Starts or continues processing request. Will automatically unlock the 2769 * driver at end of request. 2770 */ 2771 static void redo_fd_request(void) 2772 { 2773 int drive; 2774 int tmp; 2775 2776 lastredo = jiffies; 2777 if (current_drive < N_DRIVE) 2778 floppy_off(current_drive); 2779 2780 do_request: 2781 if (!current_req) { 2782 int pending; 2783 2784 spin_lock_irq(&floppy_lock); 2785 pending = set_next_request(); 2786 spin_unlock_irq(&floppy_lock); 2787 if (!pending) { 2788 do_floppy = NULL; 2789 unlock_fdc(); 2790 return; 2791 } 2792 } 2793 drive = (long)current_req->q->disk->private_data; 2794 set_fdc(drive); 2795 reschedule_timeout(current_drive, "redo fd request"); 2796 2797 set_floppy(drive); 2798 raw_cmd = &default_raw_cmd; 2799 raw_cmd->flags = 0; 2800 if (start_motor(redo_fd_request)) 2801 return; 2802 2803 disk_change(current_drive); 2804 if (test_bit(current_drive, &fake_change) || 2805 test_bit(FD_DISK_CHANGED_BIT, &drive_state[current_drive].flags)) { 2806 DPRINT("disk absent or changed during operation\n"); 2807 request_done(0); 2808 goto do_request; 2809 } 2810 if (!_floppy) { /* Autodetection */ 2811 if (!probing) { 2812 drive_state[current_drive].probed_format = 0; 2813 if (next_valid_format(current_drive)) { 2814 DPRINT("no autodetectable formats\n"); 2815 _floppy = NULL; 2816 request_done(0); 2817 goto do_request; 2818 } 2819 } 2820 probing = 1; 2821 _floppy = floppy_type + drive_params[current_drive].autodetect[drive_state[current_drive].probed_format]; 2822 } else 2823 probing = 0; 2824 errors = &(current_req->error_count); 2825 tmp = make_raw_rw_request(); 2826 if (tmp < 2) { 2827 request_done(tmp); 2828 goto do_request; 2829 } 2830 2831 if (test_bit(FD_NEED_TWADDLE_BIT, &drive_state[current_drive].flags)) 2832 twaddle(current_fdc, current_drive); 2833 schedule_bh(floppy_start); 2834 debugt(__func__, "queue fd request"); 2835 return; 2836 } 2837 2838 static const struct cont_t rw_cont = { 2839 .interrupt = rw_interrupt, 2840 .redo = redo_fd_request, 2841 .error = bad_flp_intr, 2842 .done = request_done 2843 }; 2844 2845 /* schedule the request and automatically unlock the driver on completion */ 2846 static void process_fd_request(void) 2847 { 2848 cont = &rw_cont; 2849 schedule_bh(redo_fd_request); 2850 } 2851 2852 static blk_status_t floppy_queue_rq(struct blk_mq_hw_ctx *hctx, 2853 const struct blk_mq_queue_data *bd) 2854 { 2855 blk_mq_start_request(bd->rq); 2856 2857 if (WARN(max_buffer_sectors == 0, 2858 "VFS: %s called on non-open device\n", __func__)) 2859 return BLK_STS_IOERR; 2860 2861 if (WARN(atomic_read(&usage_count) == 0, 2862 "warning: usage count=0, current_req=%p sect=%ld flags=%llx\n", 2863 current_req, (long)blk_rq_pos(current_req), 2864 (unsigned long long) current_req->cmd_flags)) 2865 return BLK_STS_IOERR; 2866 2867 if (test_and_set_bit(0, &fdc_busy)) { 2868 /* fdc busy, this new request will be treated when the 2869 current one is done */ 2870 is_alive(__func__, "old request running"); 2871 return BLK_STS_RESOURCE; 2872 } 2873 2874 spin_lock_irq(&floppy_lock); 2875 list_add_tail(&bd->rq->queuelist, &floppy_reqs); 2876 spin_unlock_irq(&floppy_lock); 2877 2878 command_status = FD_COMMAND_NONE; 2879 __reschedule_timeout(MAXTIMEOUT, "fd_request"); 2880 set_fdc(0); 2881 process_fd_request(); 2882 is_alive(__func__, ""); 2883 return BLK_STS_OK; 2884 } 2885 2886 static const struct cont_t poll_cont = { 2887 .interrupt = success_and_wakeup, 2888 .redo = floppy_ready, 2889 .error = generic_failure, 2890 .done = generic_done 2891 }; 2892 2893 static int poll_drive(bool interruptible, int flag) 2894 { 2895 /* no auto-sense, just clear dcl */ 2896 raw_cmd = &default_raw_cmd; 2897 raw_cmd->flags = flag; 2898 raw_cmd->track = 0; 2899 raw_cmd->cmd_count = 0; 2900 cont = &poll_cont; 2901 debug_dcl(drive_params[current_drive].flags, 2902 "setting NEWCHANGE in poll_drive\n"); 2903 set_bit(FD_DISK_NEWCHANGE_BIT, &drive_state[current_drive].flags); 2904 2905 return wait_til_done(floppy_ready, interruptible); 2906 } 2907 2908 /* 2909 * User triggered reset 2910 * ==================== 2911 */ 2912 2913 static void reset_intr(void) 2914 { 2915 pr_info("weird, reset interrupt called\n"); 2916 } 2917 2918 static const struct cont_t reset_cont = { 2919 .interrupt = reset_intr, 2920 .redo = success_and_wakeup, 2921 .error = generic_failure, 2922 .done = generic_done 2923 }; 2924 2925 /* 2926 * Resets the FDC connected to drive <drive>. 2927 * Both current_drive and current_fdc are changed to match the new drive. 2928 */ 2929 static int user_reset_fdc(int drive, int arg, bool interruptible) 2930 { 2931 int ret; 2932 2933 if (lock_fdc(drive)) 2934 return -EINTR; 2935 2936 if (arg == FD_RESET_ALWAYS) 2937 fdc_state[current_fdc].reset = 1; 2938 if (fdc_state[current_fdc].reset) { 2939 /* note: reset_fdc will take care of unlocking the driver 2940 * on completion. 2941 */ 2942 cont = &reset_cont; 2943 ret = wait_til_done(reset_fdc, interruptible); 2944 if (ret == -EINTR) 2945 return -EINTR; 2946 } 2947 process_fd_request(); 2948 return 0; 2949 } 2950 2951 /* 2952 * Misc Ioctl's and support 2953 * ======================== 2954 */ 2955 static inline int fd_copyout(void __user *param, const void *address, 2956 unsigned long size) 2957 { 2958 return copy_to_user(param, address, size) ? -EFAULT : 0; 2959 } 2960 2961 static inline int fd_copyin(void __user *param, void *address, 2962 unsigned long size) 2963 { 2964 return copy_from_user(address, param, size) ? -EFAULT : 0; 2965 } 2966 2967 static const char *drive_name(int type, int drive) 2968 { 2969 struct floppy_struct *floppy; 2970 2971 if (type) 2972 floppy = floppy_type + type; 2973 else { 2974 if (drive_params[drive].native_format) 2975 floppy = floppy_type + drive_params[drive].native_format; 2976 else 2977 return "(null)"; 2978 } 2979 if (floppy->name) 2980 return floppy->name; 2981 else 2982 return "(null)"; 2983 } 2984 2985 /* raw commands */ 2986 static void raw_cmd_done(int flag) 2987 { 2988 if (!flag) { 2989 raw_cmd->flags |= FD_RAW_FAILURE; 2990 raw_cmd->flags |= FD_RAW_HARDFAILURE; 2991 } else { 2992 raw_cmd->reply_count = inr; 2993 if (raw_cmd->reply_count > FD_RAW_REPLY_SIZE) 2994 raw_cmd->reply_count = 0; 2995 memcpy(raw_cmd->reply, reply_buffer, raw_cmd->reply_count); 2996 2997 if (raw_cmd->flags & (FD_RAW_READ | FD_RAW_WRITE)) { 2998 unsigned long flags; 2999 flags = claim_dma_lock(); 3000 raw_cmd->length = fd_get_dma_residue(); 3001 release_dma_lock(flags); 3002 } 3003 3004 if ((raw_cmd->flags & FD_RAW_SOFTFAILURE) && 3005 (!raw_cmd->reply_count || (raw_cmd->reply[0] & 0xc0))) 3006 raw_cmd->flags |= FD_RAW_FAILURE; 3007 3008 if (disk_change(current_drive)) 3009 raw_cmd->flags |= FD_RAW_DISK_CHANGE; 3010 else 3011 raw_cmd->flags &= ~FD_RAW_DISK_CHANGE; 3012 if (raw_cmd->flags & FD_RAW_NO_MOTOR_AFTER) 3013 motor_off_callback(&motor_off_timer[current_drive]); 3014 3015 if (raw_cmd->next && 3016 (!(raw_cmd->flags & FD_RAW_FAILURE) || 3017 !(raw_cmd->flags & FD_RAW_STOP_IF_FAILURE)) && 3018 ((raw_cmd->flags & FD_RAW_FAILURE) || 3019 !(raw_cmd->flags & FD_RAW_STOP_IF_SUCCESS))) { 3020 raw_cmd = raw_cmd->next; 3021 return; 3022 } 3023 } 3024 generic_done(flag); 3025 } 3026 3027 static const struct cont_t raw_cmd_cont = { 3028 .interrupt = success_and_wakeup, 3029 .redo = floppy_start, 3030 .error = generic_failure, 3031 .done = raw_cmd_done 3032 }; 3033 3034 static int raw_cmd_copyout(int cmd, void __user *param, 3035 struct floppy_raw_cmd *ptr) 3036 { 3037 int ret; 3038 3039 while (ptr) { 3040 struct floppy_raw_cmd cmd = *ptr; 3041 cmd.next = NULL; 3042 cmd.kernel_data = NULL; 3043 ret = copy_to_user(param, &cmd, sizeof(cmd)); 3044 if (ret) 3045 return -EFAULT; 3046 param += sizeof(struct floppy_raw_cmd); 3047 if ((ptr->flags & FD_RAW_READ) && ptr->buffer_length) { 3048 if (ptr->length >= 0 && 3049 ptr->length <= ptr->buffer_length) { 3050 long length = ptr->buffer_length - ptr->length; 3051 ret = fd_copyout(ptr->data, ptr->kernel_data, 3052 length); 3053 if (ret) 3054 return ret; 3055 } 3056 } 3057 ptr = ptr->next; 3058 } 3059 3060 return 0; 3061 } 3062 3063 static void raw_cmd_free(struct floppy_raw_cmd **ptr) 3064 { 3065 struct floppy_raw_cmd *next; 3066 struct floppy_raw_cmd *this; 3067 3068 this = *ptr; 3069 *ptr = NULL; 3070 while (this) { 3071 if (this->buffer_length) { 3072 fd_dma_mem_free((unsigned long)this->kernel_data, 3073 this->buffer_length); 3074 this->buffer_length = 0; 3075 } 3076 next = this->next; 3077 kfree(this); 3078 this = next; 3079 } 3080 } 3081 3082 #define MAX_LEN (1UL << MAX_ORDER << PAGE_SHIFT) 3083 3084 static int raw_cmd_copyin(int cmd, void __user *param, 3085 struct floppy_raw_cmd **rcmd) 3086 { 3087 struct floppy_raw_cmd *ptr; 3088 int ret; 3089 3090 *rcmd = NULL; 3091 3092 loop: 3093 ptr = kmalloc(sizeof(struct floppy_raw_cmd), GFP_KERNEL); 3094 if (!ptr) 3095 return -ENOMEM; 3096 *rcmd = ptr; 3097 ret = copy_from_user(ptr, param, sizeof(*ptr)); 3098 ptr->next = NULL; 3099 ptr->buffer_length = 0; 3100 ptr->kernel_data = NULL; 3101 if (ret) 3102 return -EFAULT; 3103 param += sizeof(struct floppy_raw_cmd); 3104 if (ptr->cmd_count > FD_RAW_CMD_FULLSIZE) 3105 return -EINVAL; 3106 3107 memset(ptr->reply, 0, FD_RAW_REPLY_SIZE); 3108 ptr->resultcode = 0; 3109 3110 if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) { 3111 if (ptr->length <= 0 || ptr->length >= MAX_LEN) 3112 return -EINVAL; 3113 ptr->kernel_data = (char *)fd_dma_mem_alloc(ptr->length); 3114 fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length); 3115 if (!ptr->kernel_data) 3116 return -ENOMEM; 3117 ptr->buffer_length = ptr->length; 3118 } 3119 if (ptr->flags & FD_RAW_WRITE) { 3120 ret = fd_copyin(ptr->data, ptr->kernel_data, ptr->length); 3121 if (ret) 3122 return ret; 3123 } 3124 3125 if (ptr->flags & FD_RAW_MORE) { 3126 rcmd = &(ptr->next); 3127 ptr->rate &= 0x43; 3128 goto loop; 3129 } 3130 3131 return 0; 3132 } 3133 3134 static int raw_cmd_ioctl(int cmd, void __user *param) 3135 { 3136 struct floppy_raw_cmd *my_raw_cmd; 3137 int drive; 3138 int ret2; 3139 int ret; 3140 3141 if (fdc_state[current_fdc].rawcmd <= 1) 3142 fdc_state[current_fdc].rawcmd = 1; 3143 for (drive = 0; drive < N_DRIVE; drive++) { 3144 if (FDC(drive) != current_fdc) 3145 continue; 3146 if (drive == current_drive) { 3147 if (drive_state[drive].fd_ref > 1) { 3148 fdc_state[current_fdc].rawcmd = 2; 3149 break; 3150 } 3151 } else if (drive_state[drive].fd_ref) { 3152 fdc_state[current_fdc].rawcmd = 2; 3153 break; 3154 } 3155 } 3156 3157 if (fdc_state[current_fdc].reset) 3158 return -EIO; 3159 3160 ret = raw_cmd_copyin(cmd, param, &my_raw_cmd); 3161 if (ret) { 3162 raw_cmd_free(&my_raw_cmd); 3163 return ret; 3164 } 3165 3166 raw_cmd = my_raw_cmd; 3167 cont = &raw_cmd_cont; 3168 ret = wait_til_done(floppy_start, true); 3169 debug_dcl(drive_params[current_drive].flags, 3170 "calling disk change from raw_cmd ioctl\n"); 3171 3172 if (ret != -EINTR && fdc_state[current_fdc].reset) 3173 ret = -EIO; 3174 3175 drive_state[current_drive].track = NO_TRACK; 3176 3177 ret2 = raw_cmd_copyout(cmd, param, my_raw_cmd); 3178 if (!ret) 3179 ret = ret2; 3180 raw_cmd_free(&my_raw_cmd); 3181 return ret; 3182 } 3183 3184 static int invalidate_drive(struct block_device *bdev) 3185 { 3186 /* invalidate the buffer track to force a reread */ 3187 set_bit((long)bdev->bd_disk->private_data, &fake_change); 3188 process_fd_request(); 3189 if (bdev_check_media_change(bdev)) 3190 floppy_revalidate(bdev->bd_disk); 3191 return 0; 3192 } 3193 3194 static int set_geometry(unsigned int cmd, struct floppy_struct *g, 3195 int drive, int type, struct block_device *bdev) 3196 { 3197 int cnt; 3198 3199 /* sanity checking for parameters. */ 3200 if ((int)g->sect <= 0 || 3201 (int)g->head <= 0 || 3202 /* check for overflow in max_sector */ 3203 (int)(g->sect * g->head) <= 0 || 3204 /* check for zero in raw_cmd->cmd[F_SECT_PER_TRACK] */ 3205 (unsigned char)((g->sect << 2) >> FD_SIZECODE(g)) == 0 || 3206 g->track <= 0 || g->track > drive_params[drive].tracks >> STRETCH(g) || 3207 /* check if reserved bits are set */ 3208 (g->stretch & ~(FD_STRETCH | FD_SWAPSIDES | FD_SECTBASEMASK)) != 0) 3209 return -EINVAL; 3210 if (type) { 3211 if (!capable(CAP_SYS_ADMIN)) 3212 return -EPERM; 3213 mutex_lock(&open_lock); 3214 if (lock_fdc(drive)) { 3215 mutex_unlock(&open_lock); 3216 return -EINTR; 3217 } 3218 floppy_type[type] = *g; 3219 floppy_type[type].name = "user format"; 3220 for (cnt = type << 2; cnt < (type << 2) + 4; cnt++) 3221 floppy_sizes[cnt] = floppy_sizes[cnt + 0x80] = 3222 floppy_type[type].size + 1; 3223 process_fd_request(); 3224 for (cnt = 0; cnt < N_DRIVE; cnt++) { 3225 struct block_device *bdev = opened_bdev[cnt]; 3226 if (!bdev || ITYPE(drive_state[cnt].fd_device) != type) 3227 continue; 3228 __invalidate_device(bdev, true); 3229 } 3230 mutex_unlock(&open_lock); 3231 } else { 3232 int oldStretch; 3233 3234 if (lock_fdc(drive)) 3235 return -EINTR; 3236 if (cmd != FDDEFPRM) { 3237 /* notice a disk change immediately, else 3238 * we lose our settings immediately*/ 3239 if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR) 3240 return -EINTR; 3241 } 3242 oldStretch = g->stretch; 3243 user_params[drive] = *g; 3244 if (buffer_drive == drive) 3245 SUPBOUND(buffer_max, user_params[drive].sect); 3246 current_type[drive] = &user_params[drive]; 3247 floppy_sizes[drive] = user_params[drive].size; 3248 if (cmd == FDDEFPRM) 3249 drive_state[current_drive].keep_data = -1; 3250 else 3251 drive_state[current_drive].keep_data = 1; 3252 /* invalidation. Invalidate only when needed, i.e. 3253 * when there are already sectors in the buffer cache 3254 * whose number will change. This is useful, because 3255 * mtools often changes the geometry of the disk after 3256 * looking at the boot block */ 3257 if (drive_state[current_drive].maxblock > user_params[drive].sect || 3258 drive_state[current_drive].maxtrack || 3259 ((user_params[drive].sect ^ oldStretch) & 3260 (FD_SWAPSIDES | FD_SECTBASEMASK))) 3261 invalidate_drive(bdev); 3262 else 3263 process_fd_request(); 3264 } 3265 return 0; 3266 } 3267 3268 /* handle obsolete ioctl's */ 3269 static unsigned int ioctl_table[] = { 3270 FDCLRPRM, 3271 FDSETPRM, 3272 FDDEFPRM, 3273 FDGETPRM, 3274 FDMSGON, 3275 FDMSGOFF, 3276 FDFMTBEG, 3277 FDFMTTRK, 3278 FDFMTEND, 3279 FDSETEMSGTRESH, 3280 FDFLUSH, 3281 FDSETMAXERRS, 3282 FDGETMAXERRS, 3283 FDGETDRVTYP, 3284 FDSETDRVPRM, 3285 FDGETDRVPRM, 3286 FDGETDRVSTAT, 3287 FDPOLLDRVSTAT, 3288 FDRESET, 3289 FDGETFDCSTAT, 3290 FDWERRORCLR, 3291 FDWERRORGET, 3292 FDRAWCMD, 3293 FDEJECT, 3294 FDTWADDLE 3295 }; 3296 3297 static int normalize_ioctl(unsigned int *cmd, int *size) 3298 { 3299 int i; 3300 3301 for (i = 0; i < ARRAY_SIZE(ioctl_table); i++) { 3302 if ((*cmd & 0xffff) == (ioctl_table[i] & 0xffff)) { 3303 *size = _IOC_SIZE(*cmd); 3304 *cmd = ioctl_table[i]; 3305 if (*size > _IOC_SIZE(*cmd)) { 3306 pr_info("ioctl not yet supported\n"); 3307 return -EFAULT; 3308 } 3309 return 0; 3310 } 3311 } 3312 return -EINVAL; 3313 } 3314 3315 static int get_floppy_geometry(int drive, int type, struct floppy_struct **g) 3316 { 3317 if (type) 3318 *g = &floppy_type[type]; 3319 else { 3320 if (lock_fdc(drive)) 3321 return -EINTR; 3322 if (poll_drive(false, 0) == -EINTR) 3323 return -EINTR; 3324 process_fd_request(); 3325 *g = current_type[drive]; 3326 } 3327 if (!*g) 3328 return -ENODEV; 3329 return 0; 3330 } 3331 3332 static int fd_getgeo(struct block_device *bdev, struct hd_geometry *geo) 3333 { 3334 int drive = (long)bdev->bd_disk->private_data; 3335 int type = ITYPE(drive_state[drive].fd_device); 3336 struct floppy_struct *g; 3337 int ret; 3338 3339 ret = get_floppy_geometry(drive, type, &g); 3340 if (ret) 3341 return ret; 3342 3343 geo->heads = g->head; 3344 geo->sectors = g->sect; 3345 geo->cylinders = g->track; 3346 return 0; 3347 } 3348 3349 static bool valid_floppy_drive_params(const short autodetect[FD_AUTODETECT_SIZE], 3350 int native_format) 3351 { 3352 size_t floppy_type_size = ARRAY_SIZE(floppy_type); 3353 size_t i = 0; 3354 3355 for (i = 0; i < FD_AUTODETECT_SIZE; ++i) { 3356 if (autodetect[i] < 0 || 3357 autodetect[i] >= floppy_type_size) 3358 return false; 3359 } 3360 3361 if (native_format < 0 || native_format >= floppy_type_size) 3362 return false; 3363 3364 return true; 3365 } 3366 3367 static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, 3368 unsigned long param) 3369 { 3370 int drive = (long)bdev->bd_disk->private_data; 3371 int type = ITYPE(drive_state[drive].fd_device); 3372 int i; 3373 int ret; 3374 int size; 3375 union inparam { 3376 struct floppy_struct g; /* geometry */ 3377 struct format_descr f; 3378 struct floppy_max_errors max_errors; 3379 struct floppy_drive_params dp; 3380 } inparam; /* parameters coming from user space */ 3381 const void *outparam; /* parameters passed back to user space */ 3382 3383 /* convert compatibility eject ioctls into floppy eject ioctl. 3384 * We do this in order to provide a means to eject floppy disks before 3385 * installing the new fdutils package */ 3386 if (cmd == CDROMEJECT || /* CD-ROM eject */ 3387 cmd == 0x6470) { /* SunOS floppy eject */ 3388 DPRINT("obsolete eject ioctl\n"); 3389 DPRINT("please use floppycontrol --eject\n"); 3390 cmd = FDEJECT; 3391 } 3392 3393 if (!((cmd & 0xff00) == 0x0200)) 3394 return -EINVAL; 3395 3396 /* convert the old style command into a new style command */ 3397 ret = normalize_ioctl(&cmd, &size); 3398 if (ret) 3399 return ret; 3400 3401 /* permission checks */ 3402 if (((cmd & 0x40) && !(mode & (FMODE_WRITE | FMODE_WRITE_IOCTL))) || 3403 ((cmd & 0x80) && !capable(CAP_SYS_ADMIN))) 3404 return -EPERM; 3405 3406 if (WARN_ON(size < 0 || size > sizeof(inparam))) 3407 return -EINVAL; 3408 3409 /* copyin */ 3410 memset(&inparam, 0, sizeof(inparam)); 3411 if (_IOC_DIR(cmd) & _IOC_WRITE) { 3412 ret = fd_copyin((void __user *)param, &inparam, size); 3413 if (ret) 3414 return ret; 3415 } 3416 3417 switch (cmd) { 3418 case FDEJECT: 3419 if (drive_state[drive].fd_ref != 1) 3420 /* somebody else has this drive open */ 3421 return -EBUSY; 3422 if (lock_fdc(drive)) 3423 return -EINTR; 3424 3425 /* do the actual eject. Fails on 3426 * non-Sparc architectures */ 3427 ret = fd_eject(UNIT(drive)); 3428 3429 set_bit(FD_DISK_CHANGED_BIT, &drive_state[drive].flags); 3430 set_bit(FD_VERIFY_BIT, &drive_state[drive].flags); 3431 process_fd_request(); 3432 return ret; 3433 case FDCLRPRM: 3434 if (lock_fdc(drive)) 3435 return -EINTR; 3436 current_type[drive] = NULL; 3437 floppy_sizes[drive] = MAX_DISK_SIZE << 1; 3438 drive_state[drive].keep_data = 0; 3439 return invalidate_drive(bdev); 3440 case FDSETPRM: 3441 case FDDEFPRM: 3442 return set_geometry(cmd, &inparam.g, drive, type, bdev); 3443 case FDGETPRM: 3444 ret = get_floppy_geometry(drive, type, 3445 (struct floppy_struct **)&outparam); 3446 if (ret) 3447 return ret; 3448 memcpy(&inparam.g, outparam, 3449 offsetof(struct floppy_struct, name)); 3450 outparam = &inparam.g; 3451 break; 3452 case FDMSGON: 3453 drive_params[drive].flags |= FTD_MSG; 3454 return 0; 3455 case FDMSGOFF: 3456 drive_params[drive].flags &= ~FTD_MSG; 3457 return 0; 3458 case FDFMTBEG: 3459 if (lock_fdc(drive)) 3460 return -EINTR; 3461 if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR) 3462 return -EINTR; 3463 ret = drive_state[drive].flags; 3464 process_fd_request(); 3465 if (ret & FD_VERIFY) 3466 return -ENODEV; 3467 if (!(ret & FD_DISK_WRITABLE)) 3468 return -EROFS; 3469 return 0; 3470 case FDFMTTRK: 3471 if (drive_state[drive].fd_ref != 1) 3472 return -EBUSY; 3473 return do_format(drive, &inparam.f); 3474 case FDFMTEND: 3475 case FDFLUSH: 3476 if (lock_fdc(drive)) 3477 return -EINTR; 3478 return invalidate_drive(bdev); 3479 case FDSETEMSGTRESH: 3480 drive_params[drive].max_errors.reporting = (unsigned short)(param & 0x0f); 3481 return 0; 3482 case FDGETMAXERRS: 3483 outparam = &drive_params[drive].max_errors; 3484 break; 3485 case FDSETMAXERRS: 3486 drive_params[drive].max_errors = inparam.max_errors; 3487 break; 3488 case FDGETDRVTYP: 3489 outparam = drive_name(type, drive); 3490 SUPBOUND(size, strlen((const char *)outparam) + 1); 3491 break; 3492 case FDSETDRVPRM: 3493 if (!valid_floppy_drive_params(inparam.dp.autodetect, 3494 inparam.dp.native_format)) 3495 return -EINVAL; 3496 drive_params[drive] = inparam.dp; 3497 break; 3498 case FDGETDRVPRM: 3499 outparam = &drive_params[drive]; 3500 break; 3501 case FDPOLLDRVSTAT: 3502 if (lock_fdc(drive)) 3503 return -EINTR; 3504 if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR) 3505 return -EINTR; 3506 process_fd_request(); 3507 fallthrough; 3508 case FDGETDRVSTAT: 3509 outparam = &drive_state[drive]; 3510 break; 3511 case FDRESET: 3512 return user_reset_fdc(drive, (int)param, true); 3513 case FDGETFDCSTAT: 3514 outparam = &fdc_state[FDC(drive)]; 3515 break; 3516 case FDWERRORCLR: 3517 memset(&write_errors[drive], 0, sizeof(write_errors[drive])); 3518 return 0; 3519 case FDWERRORGET: 3520 outparam = &write_errors[drive]; 3521 break; 3522 case FDRAWCMD: 3523 if (type) 3524 return -EINVAL; 3525 if (lock_fdc(drive)) 3526 return -EINTR; 3527 set_floppy(drive); 3528 i = raw_cmd_ioctl(cmd, (void __user *)param); 3529 if (i == -EINTR) 3530 return -EINTR; 3531 process_fd_request(); 3532 return i; 3533 case FDTWADDLE: 3534 if (lock_fdc(drive)) 3535 return -EINTR; 3536 twaddle(current_fdc, current_drive); 3537 process_fd_request(); 3538 return 0; 3539 default: 3540 return -EINVAL; 3541 } 3542 3543 if (_IOC_DIR(cmd) & _IOC_READ) 3544 return fd_copyout((void __user *)param, outparam, size); 3545 3546 return 0; 3547 } 3548 3549 static int fd_ioctl(struct block_device *bdev, fmode_t mode, 3550 unsigned int cmd, unsigned long param) 3551 { 3552 int ret; 3553 3554 mutex_lock(&floppy_mutex); 3555 ret = fd_locked_ioctl(bdev, mode, cmd, param); 3556 mutex_unlock(&floppy_mutex); 3557 3558 return ret; 3559 } 3560 3561 #ifdef CONFIG_COMPAT 3562 3563 struct compat_floppy_drive_params { 3564 char cmos; 3565 compat_ulong_t max_dtr; 3566 compat_ulong_t hlt; 3567 compat_ulong_t hut; 3568 compat_ulong_t srt; 3569 compat_ulong_t spinup; 3570 compat_ulong_t spindown; 3571 unsigned char spindown_offset; 3572 unsigned char select_delay; 3573 unsigned char rps; 3574 unsigned char tracks; 3575 compat_ulong_t timeout; 3576 unsigned char interleave_sect; 3577 struct floppy_max_errors max_errors; 3578 char flags; 3579 char read_track; 3580 short autodetect[FD_AUTODETECT_SIZE]; 3581 compat_int_t checkfreq; 3582 compat_int_t native_format; 3583 }; 3584 3585 struct compat_floppy_drive_struct { 3586 signed char flags; 3587 compat_ulong_t spinup_date; 3588 compat_ulong_t select_date; 3589 compat_ulong_t first_read_date; 3590 short probed_format; 3591 short track; 3592 short maxblock; 3593 short maxtrack; 3594 compat_int_t generation; 3595 compat_int_t keep_data; 3596 compat_int_t fd_ref; 3597 compat_int_t fd_device; 3598 compat_int_t last_checked; 3599 compat_caddr_t dmabuf; 3600 compat_int_t bufblocks; 3601 }; 3602 3603 struct compat_floppy_fdc_state { 3604 compat_int_t spec1; 3605 compat_int_t spec2; 3606 compat_int_t dtr; 3607 unsigned char version; 3608 unsigned char dor; 3609 compat_ulong_t address; 3610 unsigned int rawcmd:2; 3611 unsigned int reset:1; 3612 unsigned int need_configure:1; 3613 unsigned int perp_mode:2; 3614 unsigned int has_fifo:1; 3615 unsigned int driver_version; 3616 unsigned char track[4]; 3617 }; 3618 3619 struct compat_floppy_write_errors { 3620 unsigned int write_errors; 3621 compat_ulong_t first_error_sector; 3622 compat_int_t first_error_generation; 3623 compat_ulong_t last_error_sector; 3624 compat_int_t last_error_generation; 3625 compat_uint_t badness; 3626 }; 3627 3628 #define FDSETPRM32 _IOW(2, 0x42, struct compat_floppy_struct) 3629 #define FDDEFPRM32 _IOW(2, 0x43, struct compat_floppy_struct) 3630 #define FDSETDRVPRM32 _IOW(2, 0x90, struct compat_floppy_drive_params) 3631 #define FDGETDRVPRM32 _IOR(2, 0x11, struct compat_floppy_drive_params) 3632 #define FDGETDRVSTAT32 _IOR(2, 0x12, struct compat_floppy_drive_struct) 3633 #define FDPOLLDRVSTAT32 _IOR(2, 0x13, struct compat_floppy_drive_struct) 3634 #define FDGETFDCSTAT32 _IOR(2, 0x15, struct compat_floppy_fdc_state) 3635 #define FDWERRORGET32 _IOR(2, 0x17, struct compat_floppy_write_errors) 3636 3637 static int compat_set_geometry(struct block_device *bdev, fmode_t mode, unsigned int cmd, 3638 struct compat_floppy_struct __user *arg) 3639 { 3640 struct floppy_struct v; 3641 int drive, type; 3642 int err; 3643 3644 BUILD_BUG_ON(offsetof(struct floppy_struct, name) != 3645 offsetof(struct compat_floppy_struct, name)); 3646 3647 if (!(mode & (FMODE_WRITE | FMODE_WRITE_IOCTL))) 3648 return -EPERM; 3649 3650 memset(&v, 0, sizeof(struct floppy_struct)); 3651 if (copy_from_user(&v, arg, offsetof(struct floppy_struct, name))) 3652 return -EFAULT; 3653 3654 mutex_lock(&floppy_mutex); 3655 drive = (long)bdev->bd_disk->private_data; 3656 type = ITYPE(drive_state[drive].fd_device); 3657 err = set_geometry(cmd == FDSETPRM32 ? FDSETPRM : FDDEFPRM, 3658 &v, drive, type, bdev); 3659 mutex_unlock(&floppy_mutex); 3660 return err; 3661 } 3662 3663 static int compat_get_prm(int drive, 3664 struct compat_floppy_struct __user *arg) 3665 { 3666 struct compat_floppy_struct v; 3667 struct floppy_struct *p; 3668 int err; 3669 3670 memset(&v, 0, sizeof(v)); 3671 mutex_lock(&floppy_mutex); 3672 err = get_floppy_geometry(drive, ITYPE(drive_state[drive].fd_device), 3673 &p); 3674 if (err) { 3675 mutex_unlock(&floppy_mutex); 3676 return err; 3677 } 3678 memcpy(&v, p, offsetof(struct floppy_struct, name)); 3679 mutex_unlock(&floppy_mutex); 3680 if (copy_to_user(arg, &v, sizeof(struct compat_floppy_struct))) 3681 return -EFAULT; 3682 return 0; 3683 } 3684 3685 static int compat_setdrvprm(int drive, 3686 struct compat_floppy_drive_params __user *arg) 3687 { 3688 struct compat_floppy_drive_params v; 3689 3690 if (!capable(CAP_SYS_ADMIN)) 3691 return -EPERM; 3692 if (copy_from_user(&v, arg, sizeof(struct compat_floppy_drive_params))) 3693 return -EFAULT; 3694 if (!valid_floppy_drive_params(v.autodetect, v.native_format)) 3695 return -EINVAL; 3696 mutex_lock(&floppy_mutex); 3697 drive_params[drive].cmos = v.cmos; 3698 drive_params[drive].max_dtr = v.max_dtr; 3699 drive_params[drive].hlt = v.hlt; 3700 drive_params[drive].hut = v.hut; 3701 drive_params[drive].srt = v.srt; 3702 drive_params[drive].spinup = v.spinup; 3703 drive_params[drive].spindown = v.spindown; 3704 drive_params[drive].spindown_offset = v.spindown_offset; 3705 drive_params[drive].select_delay = v.select_delay; 3706 drive_params[drive].rps = v.rps; 3707 drive_params[drive].tracks = v.tracks; 3708 drive_params[drive].timeout = v.timeout; 3709 drive_params[drive].interleave_sect = v.interleave_sect; 3710 drive_params[drive].max_errors = v.max_errors; 3711 drive_params[drive].flags = v.flags; 3712 drive_params[drive].read_track = v.read_track; 3713 memcpy(drive_params[drive].autodetect, v.autodetect, 3714 sizeof(v.autodetect)); 3715 drive_params[drive].checkfreq = v.checkfreq; 3716 drive_params[drive].native_format = v.native_format; 3717 mutex_unlock(&floppy_mutex); 3718 return 0; 3719 } 3720 3721 static int compat_getdrvprm(int drive, 3722 struct compat_floppy_drive_params __user *arg) 3723 { 3724 struct compat_floppy_drive_params v; 3725 3726 memset(&v, 0, sizeof(struct compat_floppy_drive_params)); 3727 mutex_lock(&floppy_mutex); 3728 v.cmos = drive_params[drive].cmos; 3729 v.max_dtr = drive_params[drive].max_dtr; 3730 v.hlt = drive_params[drive].hlt; 3731 v.hut = drive_params[drive].hut; 3732 v.srt = drive_params[drive].srt; 3733 v.spinup = drive_params[drive].spinup; 3734 v.spindown = drive_params[drive].spindown; 3735 v.spindown_offset = drive_params[drive].spindown_offset; 3736 v.select_delay = drive_params[drive].select_delay; 3737 v.rps = drive_params[drive].rps; 3738 v.tracks = drive_params[drive].tracks; 3739 v.timeout = drive_params[drive].timeout; 3740 v.interleave_sect = drive_params[drive].interleave_sect; 3741 v.max_errors = drive_params[drive].max_errors; 3742 v.flags = drive_params[drive].flags; 3743 v.read_track = drive_params[drive].read_track; 3744 memcpy(v.autodetect, drive_params[drive].autodetect, 3745 sizeof(v.autodetect)); 3746 v.checkfreq = drive_params[drive].checkfreq; 3747 v.native_format = drive_params[drive].native_format; 3748 mutex_unlock(&floppy_mutex); 3749 3750 if (copy_to_user(arg, &v, sizeof(struct compat_floppy_drive_params))) 3751 return -EFAULT; 3752 return 0; 3753 } 3754 3755 static int compat_getdrvstat(int drive, bool poll, 3756 struct compat_floppy_drive_struct __user *arg) 3757 { 3758 struct compat_floppy_drive_struct v; 3759 3760 memset(&v, 0, sizeof(struct compat_floppy_drive_struct)); 3761 mutex_lock(&floppy_mutex); 3762 3763 if (poll) { 3764 if (lock_fdc(drive)) 3765 goto Eintr; 3766 if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR) 3767 goto Eintr; 3768 process_fd_request(); 3769 } 3770 v.spinup_date = drive_state[drive].spinup_date; 3771 v.select_date = drive_state[drive].select_date; 3772 v.first_read_date = drive_state[drive].first_read_date; 3773 v.probed_format = drive_state[drive].probed_format; 3774 v.track = drive_state[drive].track; 3775 v.maxblock = drive_state[drive].maxblock; 3776 v.maxtrack = drive_state[drive].maxtrack; 3777 v.generation = drive_state[drive].generation; 3778 v.keep_data = drive_state[drive].keep_data; 3779 v.fd_ref = drive_state[drive].fd_ref; 3780 v.fd_device = drive_state[drive].fd_device; 3781 v.last_checked = drive_state[drive].last_checked; 3782 v.dmabuf = (uintptr_t) drive_state[drive].dmabuf; 3783 v.bufblocks = drive_state[drive].bufblocks; 3784 mutex_unlock(&floppy_mutex); 3785 3786 if (copy_to_user(arg, &v, sizeof(struct compat_floppy_drive_struct))) 3787 return -EFAULT; 3788 return 0; 3789 Eintr: 3790 mutex_unlock(&floppy_mutex); 3791 return -EINTR; 3792 } 3793 3794 static int compat_getfdcstat(int drive, 3795 struct compat_floppy_fdc_state __user *arg) 3796 { 3797 struct compat_floppy_fdc_state v32; 3798 struct floppy_fdc_state v; 3799 3800 mutex_lock(&floppy_mutex); 3801 v = fdc_state[FDC(drive)]; 3802 mutex_unlock(&floppy_mutex); 3803 3804 memset(&v32, 0, sizeof(struct compat_floppy_fdc_state)); 3805 v32.spec1 = v.spec1; 3806 v32.spec2 = v.spec2; 3807 v32.dtr = v.dtr; 3808 v32.version = v.version; 3809 v32.dor = v.dor; 3810 v32.address = v.address; 3811 v32.rawcmd = v.rawcmd; 3812 v32.reset = v.reset; 3813 v32.need_configure = v.need_configure; 3814 v32.perp_mode = v.perp_mode; 3815 v32.has_fifo = v.has_fifo; 3816 v32.driver_version = v.driver_version; 3817 memcpy(v32.track, v.track, 4); 3818 if (copy_to_user(arg, &v32, sizeof(struct compat_floppy_fdc_state))) 3819 return -EFAULT; 3820 return 0; 3821 } 3822 3823 static int compat_werrorget(int drive, 3824 struct compat_floppy_write_errors __user *arg) 3825 { 3826 struct compat_floppy_write_errors v32; 3827 struct floppy_write_errors v; 3828 3829 memset(&v32, 0, sizeof(struct compat_floppy_write_errors)); 3830 mutex_lock(&floppy_mutex); 3831 v = write_errors[drive]; 3832 mutex_unlock(&floppy_mutex); 3833 v32.write_errors = v.write_errors; 3834 v32.first_error_sector = v.first_error_sector; 3835 v32.first_error_generation = v.first_error_generation; 3836 v32.last_error_sector = v.last_error_sector; 3837 v32.last_error_generation = v.last_error_generation; 3838 v32.badness = v.badness; 3839 if (copy_to_user(arg, &v32, sizeof(struct compat_floppy_write_errors))) 3840 return -EFAULT; 3841 return 0; 3842 } 3843 3844 static int fd_compat_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, 3845 unsigned long param) 3846 { 3847 int drive = (long)bdev->bd_disk->private_data; 3848 switch (cmd) { 3849 case CDROMEJECT: /* CD-ROM eject */ 3850 case 0x6470: /* SunOS floppy eject */ 3851 3852 case FDMSGON: 3853 case FDMSGOFF: 3854 case FDSETEMSGTRESH: 3855 case FDFLUSH: 3856 case FDWERRORCLR: 3857 case FDEJECT: 3858 case FDCLRPRM: 3859 case FDFMTBEG: 3860 case FDRESET: 3861 case FDTWADDLE: 3862 return fd_ioctl(bdev, mode, cmd, param); 3863 case FDSETMAXERRS: 3864 case FDGETMAXERRS: 3865 case FDGETDRVTYP: 3866 case FDFMTEND: 3867 case FDFMTTRK: 3868 case FDRAWCMD: 3869 return fd_ioctl(bdev, mode, cmd, 3870 (unsigned long)compat_ptr(param)); 3871 case FDSETPRM32: 3872 case FDDEFPRM32: 3873 return compat_set_geometry(bdev, mode, cmd, compat_ptr(param)); 3874 case FDGETPRM32: 3875 return compat_get_prm(drive, compat_ptr(param)); 3876 case FDSETDRVPRM32: 3877 return compat_setdrvprm(drive, compat_ptr(param)); 3878 case FDGETDRVPRM32: 3879 return compat_getdrvprm(drive, compat_ptr(param)); 3880 case FDPOLLDRVSTAT32: 3881 return compat_getdrvstat(drive, true, compat_ptr(param)); 3882 case FDGETDRVSTAT32: 3883 return compat_getdrvstat(drive, false, compat_ptr(param)); 3884 case FDGETFDCSTAT32: 3885 return compat_getfdcstat(drive, compat_ptr(param)); 3886 case FDWERRORGET32: 3887 return compat_werrorget(drive, compat_ptr(param)); 3888 } 3889 return -EINVAL; 3890 } 3891 #endif 3892 3893 static void __init config_types(void) 3894 { 3895 bool has_drive = false; 3896 int drive; 3897 3898 /* read drive info out of physical CMOS */ 3899 drive = 0; 3900 if (!drive_params[drive].cmos) 3901 drive_params[drive].cmos = FLOPPY0_TYPE; 3902 drive = 1; 3903 if (!drive_params[drive].cmos) 3904 drive_params[drive].cmos = FLOPPY1_TYPE; 3905 3906 /* FIXME: additional physical CMOS drive detection should go here */ 3907 3908 for (drive = 0; drive < N_DRIVE; drive++) { 3909 unsigned int type = drive_params[drive].cmos; 3910 struct floppy_drive_params *params; 3911 const char *name = NULL; 3912 char temparea[32]; 3913 3914 if (type < ARRAY_SIZE(default_drive_params)) { 3915 params = &default_drive_params[type].params; 3916 if (type) { 3917 name = default_drive_params[type].name; 3918 allowed_drive_mask |= 1 << drive; 3919 } else 3920 allowed_drive_mask &= ~(1 << drive); 3921 } else { 3922 params = &default_drive_params[0].params; 3923 snprintf(temparea, sizeof(temparea), 3924 "unknown type %d (usb?)", type); 3925 name = temparea; 3926 } 3927 if (name) { 3928 const char *prepend; 3929 if (!has_drive) { 3930 prepend = ""; 3931 has_drive = true; 3932 pr_info("Floppy drive(s):"); 3933 } else { 3934 prepend = ","; 3935 } 3936 3937 pr_cont("%s fd%d is %s", prepend, drive, name); 3938 } 3939 drive_params[drive] = *params; 3940 } 3941 3942 if (has_drive) 3943 pr_cont("\n"); 3944 } 3945 3946 static void floppy_release(struct gendisk *disk, fmode_t mode) 3947 { 3948 int drive = (long)disk->private_data; 3949 3950 mutex_lock(&floppy_mutex); 3951 mutex_lock(&open_lock); 3952 if (!drive_state[drive].fd_ref--) { 3953 DPRINT("floppy_release with fd_ref == 0"); 3954 drive_state[drive].fd_ref = 0; 3955 } 3956 if (!drive_state[drive].fd_ref) 3957 opened_bdev[drive] = NULL; 3958 mutex_unlock(&open_lock); 3959 mutex_unlock(&floppy_mutex); 3960 } 3961 3962 /* 3963 * floppy_open check for aliasing (/dev/fd0 can be the same as 3964 * /dev/PS0 etc), and disallows simultaneous access to the same 3965 * drive with different device numbers. 3966 */ 3967 static int floppy_open(struct block_device *bdev, fmode_t mode) 3968 { 3969 int drive = (long)bdev->bd_disk->private_data; 3970 int old_dev, new_dev; 3971 int try; 3972 int res = -EBUSY; 3973 char *tmp; 3974 3975 mutex_lock(&floppy_mutex); 3976 mutex_lock(&open_lock); 3977 old_dev = drive_state[drive].fd_device; 3978 if (opened_bdev[drive] && opened_bdev[drive] != bdev) 3979 goto out2; 3980 3981 if (!drive_state[drive].fd_ref && (drive_params[drive].flags & FD_BROKEN_DCL)) { 3982 set_bit(FD_DISK_CHANGED_BIT, &drive_state[drive].flags); 3983 set_bit(FD_VERIFY_BIT, &drive_state[drive].flags); 3984 } 3985 3986 drive_state[drive].fd_ref++; 3987 3988 opened_bdev[drive] = bdev; 3989 3990 res = -ENXIO; 3991 3992 if (!floppy_track_buffer) { 3993 /* if opening an ED drive, reserve a big buffer, 3994 * else reserve a small one */ 3995 if ((drive_params[drive].cmos == 6) || (drive_params[drive].cmos == 5)) 3996 try = 64; /* Only 48 actually useful */ 3997 else 3998 try = 32; /* Only 24 actually useful */ 3999 4000 tmp = (char *)fd_dma_mem_alloc(1024 * try); 4001 if (!tmp && !floppy_track_buffer) { 4002 try >>= 1; /* buffer only one side */ 4003 INFBOUND(try, 16); 4004 tmp = (char *)fd_dma_mem_alloc(1024 * try); 4005 } 4006 if (!tmp && !floppy_track_buffer) 4007 fallback_on_nodma_alloc(&tmp, 2048 * try); 4008 if (!tmp && !floppy_track_buffer) { 4009 DPRINT("Unable to allocate DMA memory\n"); 4010 goto out; 4011 } 4012 if (floppy_track_buffer) { 4013 if (tmp) 4014 fd_dma_mem_free((unsigned long)tmp, try * 1024); 4015 } else { 4016 buffer_min = buffer_max = -1; 4017 floppy_track_buffer = tmp; 4018 max_buffer_sectors = try; 4019 } 4020 } 4021 4022 new_dev = MINOR(bdev->bd_dev); 4023 drive_state[drive].fd_device = new_dev; 4024 set_capacity(disks[drive][ITYPE(new_dev)], floppy_sizes[new_dev]); 4025 if (old_dev != -1 && old_dev != new_dev) { 4026 if (buffer_drive == drive) 4027 buffer_track = -1; 4028 } 4029 4030 if (fdc_state[FDC(drive)].rawcmd == 1) 4031 fdc_state[FDC(drive)].rawcmd = 2; 4032 4033 if (!(mode & FMODE_NDELAY)) { 4034 if (mode & (FMODE_READ|FMODE_WRITE)) { 4035 drive_state[drive].last_checked = 0; 4036 clear_bit(FD_OPEN_SHOULD_FAIL_BIT, 4037 &drive_state[drive].flags); 4038 if (bdev_check_media_change(bdev)) 4039 floppy_revalidate(bdev->bd_disk); 4040 if (test_bit(FD_DISK_CHANGED_BIT, &drive_state[drive].flags)) 4041 goto out; 4042 if (test_bit(FD_OPEN_SHOULD_FAIL_BIT, &drive_state[drive].flags)) 4043 goto out; 4044 } 4045 res = -EROFS; 4046 if ((mode & FMODE_WRITE) && 4047 !test_bit(FD_DISK_WRITABLE_BIT, &drive_state[drive].flags)) 4048 goto out; 4049 } 4050 mutex_unlock(&open_lock); 4051 mutex_unlock(&floppy_mutex); 4052 return 0; 4053 out: 4054 drive_state[drive].fd_ref--; 4055 4056 if (!drive_state[drive].fd_ref) 4057 opened_bdev[drive] = NULL; 4058 out2: 4059 mutex_unlock(&open_lock); 4060 mutex_unlock(&floppy_mutex); 4061 return res; 4062 } 4063 4064 /* 4065 * Check if the disk has been changed or if a change has been faked. 4066 */ 4067 static unsigned int floppy_check_events(struct gendisk *disk, 4068 unsigned int clearing) 4069 { 4070 int drive = (long)disk->private_data; 4071 4072 if (test_bit(FD_DISK_CHANGED_BIT, &drive_state[drive].flags) || 4073 test_bit(FD_VERIFY_BIT, &drive_state[drive].flags)) 4074 return DISK_EVENT_MEDIA_CHANGE; 4075 4076 if (time_after(jiffies, drive_state[drive].last_checked + drive_params[drive].checkfreq)) { 4077 if (lock_fdc(drive)) 4078 return 0; 4079 poll_drive(false, 0); 4080 process_fd_request(); 4081 } 4082 4083 if (test_bit(FD_DISK_CHANGED_BIT, &drive_state[drive].flags) || 4084 test_bit(FD_VERIFY_BIT, &drive_state[drive].flags) || 4085 test_bit(drive, &fake_change) || 4086 drive_no_geom(drive)) 4087 return DISK_EVENT_MEDIA_CHANGE; 4088 return 0; 4089 } 4090 4091 /* 4092 * This implements "read block 0" for floppy_revalidate(). 4093 * Needed for format autodetection, checking whether there is 4094 * a disk in the drive, and whether that disk is writable. 4095 */ 4096 4097 struct rb0_cbdata { 4098 int drive; 4099 struct completion complete; 4100 }; 4101 4102 static void floppy_rb0_cb(struct bio *bio) 4103 { 4104 struct rb0_cbdata *cbdata = (struct rb0_cbdata *)bio->bi_private; 4105 int drive = cbdata->drive; 4106 4107 if (bio->bi_status) { 4108 pr_info("floppy: error %d while reading block 0\n", 4109 bio->bi_status); 4110 set_bit(FD_OPEN_SHOULD_FAIL_BIT, &drive_state[drive].flags); 4111 } 4112 complete(&cbdata->complete); 4113 } 4114 4115 static int __floppy_read_block_0(struct block_device *bdev, int drive) 4116 { 4117 struct bio bio; 4118 struct bio_vec bio_vec; 4119 struct page *page; 4120 struct rb0_cbdata cbdata; 4121 4122 page = alloc_page(GFP_NOIO); 4123 if (!page) { 4124 process_fd_request(); 4125 return -ENOMEM; 4126 } 4127 4128 cbdata.drive = drive; 4129 4130 bio_init(&bio, bdev, &bio_vec, 1, REQ_OP_READ); 4131 bio_add_page(&bio, page, block_size(bdev), 0); 4132 4133 bio.bi_iter.bi_sector = 0; 4134 bio.bi_flags |= (1 << BIO_QUIET); 4135 bio.bi_private = &cbdata; 4136 bio.bi_end_io = floppy_rb0_cb; 4137 4138 init_completion(&cbdata.complete); 4139 4140 submit_bio(&bio); 4141 process_fd_request(); 4142 4143 wait_for_completion(&cbdata.complete); 4144 4145 __free_page(page); 4146 4147 return 0; 4148 } 4149 4150 /* revalidate the floppy disk, i.e. trigger format autodetection by reading 4151 * the bootblock (block 0). "Autodetection" is also needed to check whether 4152 * there is a disk in the drive at all... Thus we also do it for fixed 4153 * geometry formats */ 4154 static int floppy_revalidate(struct gendisk *disk) 4155 { 4156 int drive = (long)disk->private_data; 4157 int cf; 4158 int res = 0; 4159 4160 if (test_bit(FD_DISK_CHANGED_BIT, &drive_state[drive].flags) || 4161 test_bit(FD_VERIFY_BIT, &drive_state[drive].flags) || 4162 test_bit(drive, &fake_change) || 4163 drive_no_geom(drive)) { 4164 if (WARN(atomic_read(&usage_count) == 0, 4165 "VFS: revalidate called on non-open device.\n")) 4166 return -EFAULT; 4167 4168 res = lock_fdc(drive); 4169 if (res) 4170 return res; 4171 cf = (test_bit(FD_DISK_CHANGED_BIT, &drive_state[drive].flags) || 4172 test_bit(FD_VERIFY_BIT, &drive_state[drive].flags)); 4173 if (!(cf || test_bit(drive, &fake_change) || drive_no_geom(drive))) { 4174 process_fd_request(); /*already done by another thread */ 4175 return 0; 4176 } 4177 drive_state[drive].maxblock = 0; 4178 drive_state[drive].maxtrack = 0; 4179 if (buffer_drive == drive) 4180 buffer_track = -1; 4181 clear_bit(drive, &fake_change); 4182 clear_bit(FD_DISK_CHANGED_BIT, &drive_state[drive].flags); 4183 if (cf) 4184 drive_state[drive].generation++; 4185 if (drive_no_geom(drive)) { 4186 /* auto-sensing */ 4187 res = __floppy_read_block_0(opened_bdev[drive], drive); 4188 } else { 4189 if (cf) 4190 poll_drive(false, FD_RAW_NEED_DISK); 4191 process_fd_request(); 4192 } 4193 } 4194 set_capacity(disk, floppy_sizes[drive_state[drive].fd_device]); 4195 return res; 4196 } 4197 4198 static const struct block_device_operations floppy_fops = { 4199 .owner = THIS_MODULE, 4200 .open = floppy_open, 4201 .release = floppy_release, 4202 .ioctl = fd_ioctl, 4203 .getgeo = fd_getgeo, 4204 .check_events = floppy_check_events, 4205 #ifdef CONFIG_COMPAT 4206 .compat_ioctl = fd_compat_ioctl, 4207 #endif 4208 }; 4209 4210 /* 4211 * Floppy Driver initialization 4212 * ============================= 4213 */ 4214 4215 /* Determine the floppy disk controller type */ 4216 /* This routine was written by David C. Niemi */ 4217 static char __init get_fdc_version(int fdc) 4218 { 4219 int r; 4220 4221 output_byte(fdc, FD_DUMPREGS); /* 82072 and better know DUMPREGS */ 4222 if (fdc_state[fdc].reset) 4223 return FDC_NONE; 4224 r = result(fdc); 4225 if (r <= 0x00) 4226 return FDC_NONE; /* No FDC present ??? */ 4227 if ((r == 1) && (reply_buffer[ST0] == 0x80)) { 4228 pr_info("FDC %d is an 8272A\n", fdc); 4229 return FDC_8272A; /* 8272a/765 don't know DUMPREGS */ 4230 } 4231 if (r != 10) { 4232 pr_info("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n", 4233 fdc, r); 4234 return FDC_UNKNOWN; 4235 } 4236 4237 if (!fdc_configure(fdc)) { 4238 pr_info("FDC %d is an 82072\n", fdc); 4239 return FDC_82072; /* 82072 doesn't know CONFIGURE */ 4240 } 4241 4242 output_byte(fdc, FD_PERPENDICULAR); 4243 if (need_more_output(fdc) == MORE_OUTPUT) { 4244 output_byte(fdc, 0); 4245 } else { 4246 pr_info("FDC %d is an 82072A\n", fdc); 4247 return FDC_82072A; /* 82072A as found on Sparcs. */ 4248 } 4249 4250 output_byte(fdc, FD_UNLOCK); 4251 r = result(fdc); 4252 if ((r == 1) && (reply_buffer[ST0] == 0x80)) { 4253 pr_info("FDC %d is a pre-1991 82077\n", fdc); 4254 return FDC_82077_ORIG; /* Pre-1991 82077, doesn't know 4255 * LOCK/UNLOCK */ 4256 } 4257 if ((r != 1) || (reply_buffer[ST0] != 0x00)) { 4258 pr_info("FDC %d init: UNLOCK: unexpected return of %d bytes.\n", 4259 fdc, r); 4260 return FDC_UNKNOWN; 4261 } 4262 output_byte(fdc, FD_PARTID); 4263 r = result(fdc); 4264 if (r != 1) { 4265 pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n", 4266 fdc, r); 4267 return FDC_UNKNOWN; 4268 } 4269 if (reply_buffer[ST0] == 0x80) { 4270 pr_info("FDC %d is a post-1991 82077\n", fdc); 4271 return FDC_82077; /* Revised 82077AA passes all the tests */ 4272 } 4273 switch (reply_buffer[ST0] >> 5) { 4274 case 0x0: 4275 /* Either a 82078-1 or a 82078SL running at 5Volt */ 4276 pr_info("FDC %d is an 82078.\n", fdc); 4277 return FDC_82078; 4278 case 0x1: 4279 pr_info("FDC %d is a 44pin 82078\n", fdc); 4280 return FDC_82078; 4281 case 0x2: 4282 pr_info("FDC %d is a S82078B\n", fdc); 4283 return FDC_S82078B; 4284 case 0x3: 4285 pr_info("FDC %d is a National Semiconductor PC87306\n", fdc); 4286 return FDC_87306; 4287 default: 4288 pr_info("FDC %d init: 82078 variant with unknown PARTID=%d.\n", 4289 fdc, reply_buffer[ST0] >> 5); 4290 return FDC_82078_UNKN; 4291 } 4292 } /* get_fdc_version */ 4293 4294 /* lilo configuration */ 4295 4296 static void __init floppy_set_flags(int *ints, int param, int param2) 4297 { 4298 int i; 4299 4300 for (i = 0; i < ARRAY_SIZE(default_drive_params); i++) { 4301 if (param) 4302 default_drive_params[i].params.flags |= param2; 4303 else 4304 default_drive_params[i].params.flags &= ~param2; 4305 } 4306 DPRINT("%s flag 0x%x\n", param2 ? "Setting" : "Clearing", param); 4307 } 4308 4309 static void __init daring(int *ints, int param, int param2) 4310 { 4311 int i; 4312 4313 for (i = 0; i < ARRAY_SIZE(default_drive_params); i++) { 4314 if (param) { 4315 default_drive_params[i].params.select_delay = 0; 4316 default_drive_params[i].params.flags |= 4317 FD_SILENT_DCL_CLEAR; 4318 } else { 4319 default_drive_params[i].params.select_delay = 4320 2 * HZ / 100; 4321 default_drive_params[i].params.flags &= 4322 ~FD_SILENT_DCL_CLEAR; 4323 } 4324 } 4325 DPRINT("Assuming %s floppy hardware\n", param ? "standard" : "broken"); 4326 } 4327 4328 static void __init set_cmos(int *ints, int dummy, int dummy2) 4329 { 4330 int current_drive = 0; 4331 4332 if (ints[0] != 2) { 4333 DPRINT("wrong number of parameters for CMOS\n"); 4334 return; 4335 } 4336 current_drive = ints[1]; 4337 if (current_drive < 0 || current_drive >= 8) { 4338 DPRINT("bad drive for set_cmos\n"); 4339 return; 4340 } 4341 #if N_FDC > 1 4342 if (current_drive >= 4 && !FDC2) 4343 FDC2 = 0x370; 4344 #endif 4345 drive_params[current_drive].cmos = ints[2]; 4346 DPRINT("setting CMOS code to %d\n", ints[2]); 4347 } 4348 4349 static struct param_table { 4350 const char *name; 4351 void (*fn) (int *ints, int param, int param2); 4352 int *var; 4353 int def_param; 4354 int param2; 4355 } config_params[] __initdata = { 4356 {"allowed_drive_mask", NULL, &allowed_drive_mask, 0xff, 0}, /* obsolete */ 4357 {"all_drives", NULL, &allowed_drive_mask, 0xff, 0}, /* obsolete */ 4358 {"asus_pci", NULL, &allowed_drive_mask, 0x33, 0}, 4359 {"irq", NULL, &FLOPPY_IRQ, 6, 0}, 4360 {"dma", NULL, &FLOPPY_DMA, 2, 0}, 4361 {"daring", daring, NULL, 1, 0}, 4362 #if N_FDC > 1 4363 {"two_fdc", NULL, &FDC2, 0x370, 0}, 4364 {"one_fdc", NULL, &FDC2, 0, 0}, 4365 #endif 4366 {"thinkpad", floppy_set_flags, NULL, 1, FD_INVERTED_DCL}, 4367 {"broken_dcl", floppy_set_flags, NULL, 1, FD_BROKEN_DCL}, 4368 {"messages", floppy_set_flags, NULL, 1, FTD_MSG}, 4369 {"silent_dcl_clear", floppy_set_flags, NULL, 1, FD_SILENT_DCL_CLEAR}, 4370 {"debug", floppy_set_flags, NULL, 1, FD_DEBUG}, 4371 {"nodma", NULL, &can_use_virtual_dma, 1, 0}, 4372 {"omnibook", NULL, &can_use_virtual_dma, 1, 0}, 4373 {"yesdma", NULL, &can_use_virtual_dma, 0, 0}, 4374 {"fifo_depth", NULL, &fifo_depth, 0xa, 0}, 4375 {"nofifo", NULL, &no_fifo, 0x20, 0}, 4376 {"usefifo", NULL, &no_fifo, 0, 0}, 4377 {"cmos", set_cmos, NULL, 0, 0}, 4378 {"slow", NULL, &slow_floppy, 1, 0}, 4379 {"unexpected_interrupts", NULL, &print_unex, 1, 0}, 4380 {"no_unexpected_interrupts", NULL, &print_unex, 0, 0}, 4381 {"L40SX", NULL, &print_unex, 0, 0} 4382 4383 EXTRA_FLOPPY_PARAMS 4384 }; 4385 4386 static int __init floppy_setup(char *str) 4387 { 4388 int i; 4389 int param; 4390 int ints[11]; 4391 4392 str = get_options(str, ARRAY_SIZE(ints), ints); 4393 if (str) { 4394 for (i = 0; i < ARRAY_SIZE(config_params); i++) { 4395 if (strcmp(str, config_params[i].name) == 0) { 4396 if (ints[0]) 4397 param = ints[1]; 4398 else 4399 param = config_params[i].def_param; 4400 if (config_params[i].fn) 4401 config_params[i].fn(ints, param, 4402 config_params[i]. 4403 param2); 4404 if (config_params[i].var) { 4405 DPRINT("%s=%d\n", str, param); 4406 *config_params[i].var = param; 4407 } 4408 return 1; 4409 } 4410 } 4411 } 4412 if (str) { 4413 DPRINT("unknown floppy option [%s]\n", str); 4414 4415 DPRINT("allowed options are:"); 4416 for (i = 0; i < ARRAY_SIZE(config_params); i++) 4417 pr_cont(" %s", config_params[i].name); 4418 pr_cont("\n"); 4419 } else 4420 DPRINT("botched floppy option\n"); 4421 DPRINT("Read Documentation/admin-guide/blockdev/floppy.rst\n"); 4422 return 0; 4423 } 4424 4425 static int have_no_fdc = -ENODEV; 4426 4427 static ssize_t floppy_cmos_show(struct device *dev, 4428 struct device_attribute *attr, char *buf) 4429 { 4430 struct platform_device *p = to_platform_device(dev); 4431 int drive; 4432 4433 drive = p->id; 4434 return sprintf(buf, "%X\n", drive_params[drive].cmos); 4435 } 4436 4437 static DEVICE_ATTR(cmos, 0444, floppy_cmos_show, NULL); 4438 4439 static struct attribute *floppy_dev_attrs[] = { 4440 &dev_attr_cmos.attr, 4441 NULL 4442 }; 4443 4444 ATTRIBUTE_GROUPS(floppy_dev); 4445 4446 static void floppy_device_release(struct device *dev) 4447 { 4448 } 4449 4450 static int floppy_resume(struct device *dev) 4451 { 4452 int fdc; 4453 int saved_drive; 4454 4455 saved_drive = current_drive; 4456 for (fdc = 0; fdc < N_FDC; fdc++) 4457 if (fdc_state[fdc].address != -1) 4458 user_reset_fdc(REVDRIVE(fdc, 0), FD_RESET_ALWAYS, false); 4459 set_fdc(saved_drive); 4460 return 0; 4461 } 4462 4463 static const struct dev_pm_ops floppy_pm_ops = { 4464 .resume = floppy_resume, 4465 .restore = floppy_resume, 4466 }; 4467 4468 static struct platform_driver floppy_driver = { 4469 .driver = { 4470 .name = "floppy", 4471 .pm = &floppy_pm_ops, 4472 }, 4473 }; 4474 4475 static const struct blk_mq_ops floppy_mq_ops = { 4476 .queue_rq = floppy_queue_rq, 4477 }; 4478 4479 static struct platform_device floppy_device[N_DRIVE]; 4480 static bool registered[N_DRIVE]; 4481 4482 static bool floppy_available(int drive) 4483 { 4484 if (!(allowed_drive_mask & (1 << drive))) 4485 return false; 4486 if (fdc_state[FDC(drive)].version == FDC_NONE) 4487 return false; 4488 return true; 4489 } 4490 4491 static int floppy_alloc_disk(unsigned int drive, unsigned int type) 4492 { 4493 struct gendisk *disk; 4494 4495 disk = blk_mq_alloc_disk(&tag_sets[drive], NULL); 4496 if (IS_ERR(disk)) 4497 return PTR_ERR(disk); 4498 4499 blk_queue_max_hw_sectors(disk->queue, 64); 4500 disk->major = FLOPPY_MAJOR; 4501 disk->first_minor = TOMINOR(drive) | (type << 2); 4502 disk->minors = 1; 4503 disk->fops = &floppy_fops; 4504 disk->flags |= GENHD_FL_NO_PART; 4505 disk->events = DISK_EVENT_MEDIA_CHANGE; 4506 if (type) 4507 sprintf(disk->disk_name, "fd%d_type%d", drive, type); 4508 else 4509 sprintf(disk->disk_name, "fd%d", drive); 4510 /* to be cleaned up... */ 4511 disk->private_data = (void *)(long)drive; 4512 disk->flags |= GENHD_FL_REMOVABLE; 4513 4514 disks[drive][type] = disk; 4515 return 0; 4516 } 4517 4518 static DEFINE_MUTEX(floppy_probe_lock); 4519 4520 static void floppy_probe(dev_t dev) 4521 { 4522 unsigned int drive = (MINOR(dev) & 3) | ((MINOR(dev) & 0x80) >> 5); 4523 unsigned int type = (MINOR(dev) >> 2) & 0x1f; 4524 4525 if (drive >= N_DRIVE || !floppy_available(drive) || 4526 type >= ARRAY_SIZE(floppy_type)) 4527 return; 4528 4529 mutex_lock(&floppy_probe_lock); 4530 if (disks[drive][type]) 4531 goto out; 4532 if (floppy_alloc_disk(drive, type)) 4533 goto out; 4534 if (add_disk(disks[drive][type])) 4535 goto cleanup_disk; 4536 out: 4537 mutex_unlock(&floppy_probe_lock); 4538 return; 4539 4540 cleanup_disk: 4541 blk_cleanup_disk(disks[drive][type]); 4542 disks[drive][type] = NULL; 4543 mutex_unlock(&floppy_probe_lock); 4544 } 4545 4546 static int __init do_floppy_init(void) 4547 { 4548 int i, unit, drive, err; 4549 4550 set_debugt(); 4551 interruptjiffies = resultjiffies = jiffies; 4552 4553 #if defined(CONFIG_PPC) 4554 if (check_legacy_ioport(FDC1)) 4555 return -ENODEV; 4556 #endif 4557 4558 raw_cmd = NULL; 4559 4560 floppy_wq = alloc_ordered_workqueue("floppy", 0); 4561 if (!floppy_wq) 4562 return -ENOMEM; 4563 4564 for (drive = 0; drive < N_DRIVE; drive++) { 4565 memset(&tag_sets[drive], 0, sizeof(tag_sets[drive])); 4566 tag_sets[drive].ops = &floppy_mq_ops; 4567 tag_sets[drive].nr_hw_queues = 1; 4568 tag_sets[drive].nr_maps = 1; 4569 tag_sets[drive].queue_depth = 2; 4570 tag_sets[drive].numa_node = NUMA_NO_NODE; 4571 tag_sets[drive].flags = BLK_MQ_F_SHOULD_MERGE; 4572 err = blk_mq_alloc_tag_set(&tag_sets[drive]); 4573 if (err) 4574 goto out_put_disk; 4575 4576 err = floppy_alloc_disk(drive, 0); 4577 if (err) 4578 goto out_put_disk; 4579 4580 timer_setup(&motor_off_timer[drive], motor_off_callback, 0); 4581 } 4582 4583 err = __register_blkdev(FLOPPY_MAJOR, "fd", floppy_probe); 4584 if (err) 4585 goto out_put_disk; 4586 4587 err = platform_driver_register(&floppy_driver); 4588 if (err) 4589 goto out_unreg_blkdev; 4590 4591 for (i = 0; i < 256; i++) 4592 if (ITYPE(i)) 4593 floppy_sizes[i] = floppy_type[ITYPE(i)].size; 4594 else 4595 floppy_sizes[i] = MAX_DISK_SIZE << 1; 4596 4597 reschedule_timeout(MAXTIMEOUT, "floppy init"); 4598 config_types(); 4599 4600 for (i = 0; i < N_FDC; i++) { 4601 memset(&fdc_state[i], 0, sizeof(*fdc_state)); 4602 fdc_state[i].dtr = -1; 4603 fdc_state[i].dor = 0x4; 4604 #if defined(__sparc__) || defined(__mc68000__) 4605 /*sparcs/sun3x don't have a DOR reset which we can fall back on to */ 4606 #ifdef __mc68000__ 4607 if (MACH_IS_SUN3X) 4608 #endif 4609 fdc_state[i].version = FDC_82072A; 4610 #endif 4611 } 4612 4613 use_virtual_dma = can_use_virtual_dma & 1; 4614 fdc_state[0].address = FDC1; 4615 if (fdc_state[0].address == -1) { 4616 cancel_delayed_work(&fd_timeout); 4617 err = -ENODEV; 4618 goto out_unreg_driver; 4619 } 4620 #if N_FDC > 1 4621 fdc_state[1].address = FDC2; 4622 #endif 4623 4624 current_fdc = 0; /* reset fdc in case of unexpected interrupt */ 4625 err = floppy_grab_irq_and_dma(); 4626 if (err) { 4627 cancel_delayed_work(&fd_timeout); 4628 err = -EBUSY; 4629 goto out_unreg_driver; 4630 } 4631 4632 /* initialise drive state */ 4633 for (drive = 0; drive < N_DRIVE; drive++) { 4634 memset(&drive_state[drive], 0, sizeof(drive_state[drive])); 4635 memset(&write_errors[drive], 0, sizeof(write_errors[drive])); 4636 set_bit(FD_DISK_NEWCHANGE_BIT, &drive_state[drive].flags); 4637 set_bit(FD_DISK_CHANGED_BIT, &drive_state[drive].flags); 4638 set_bit(FD_VERIFY_BIT, &drive_state[drive].flags); 4639 drive_state[drive].fd_device = -1; 4640 floppy_track_buffer = NULL; 4641 max_buffer_sectors = 0; 4642 } 4643 /* 4644 * Small 10 msec delay to let through any interrupt that 4645 * initialization might have triggered, to not 4646 * confuse detection: 4647 */ 4648 msleep(10); 4649 4650 for (i = 0; i < N_FDC; i++) { 4651 fdc_state[i].driver_version = FD_DRIVER_VERSION; 4652 for (unit = 0; unit < 4; unit++) 4653 fdc_state[i].track[unit] = 0; 4654 if (fdc_state[i].address == -1) 4655 continue; 4656 fdc_state[i].rawcmd = 2; 4657 if (user_reset_fdc(REVDRIVE(i, 0), FD_RESET_ALWAYS, false)) { 4658 /* free ioports reserved by floppy_grab_irq_and_dma() */ 4659 floppy_release_regions(i); 4660 fdc_state[i].address = -1; 4661 fdc_state[i].version = FDC_NONE; 4662 continue; 4663 } 4664 /* Try to determine the floppy controller type */ 4665 fdc_state[i].version = get_fdc_version(i); 4666 if (fdc_state[i].version == FDC_NONE) { 4667 /* free ioports reserved by floppy_grab_irq_and_dma() */ 4668 floppy_release_regions(i); 4669 fdc_state[i].address = -1; 4670 continue; 4671 } 4672 if (can_use_virtual_dma == 2 && 4673 fdc_state[i].version < FDC_82072A) 4674 can_use_virtual_dma = 0; 4675 4676 have_no_fdc = 0; 4677 /* Not all FDCs seem to be able to handle the version command 4678 * properly, so force a reset for the standard FDC clones, 4679 * to avoid interrupt garbage. 4680 */ 4681 user_reset_fdc(REVDRIVE(i, 0), FD_RESET_ALWAYS, false); 4682 } 4683 current_fdc = 0; 4684 cancel_delayed_work(&fd_timeout); 4685 current_drive = 0; 4686 initialized = true; 4687 if (have_no_fdc) { 4688 DPRINT("no floppy controllers found\n"); 4689 err = have_no_fdc; 4690 goto out_release_dma; 4691 } 4692 4693 for (drive = 0; drive < N_DRIVE; drive++) { 4694 if (!floppy_available(drive)) 4695 continue; 4696 4697 floppy_device[drive].name = floppy_device_name; 4698 floppy_device[drive].id = drive; 4699 floppy_device[drive].dev.release = floppy_device_release; 4700 floppy_device[drive].dev.groups = floppy_dev_groups; 4701 4702 err = platform_device_register(&floppy_device[drive]); 4703 if (err) 4704 goto out_remove_drives; 4705 4706 registered[drive] = true; 4707 4708 err = device_add_disk(&floppy_device[drive].dev, 4709 disks[drive][0], NULL); 4710 if (err) 4711 goto out_remove_drives; 4712 } 4713 4714 return 0; 4715 4716 out_remove_drives: 4717 while (drive--) { 4718 if (floppy_available(drive)) { 4719 del_gendisk(disks[drive][0]); 4720 if (registered[drive]) 4721 platform_device_unregister(&floppy_device[drive]); 4722 } 4723 } 4724 out_release_dma: 4725 if (atomic_read(&usage_count)) 4726 floppy_release_irq_and_dma(); 4727 out_unreg_driver: 4728 platform_driver_unregister(&floppy_driver); 4729 out_unreg_blkdev: 4730 unregister_blkdev(FLOPPY_MAJOR, "fd"); 4731 out_put_disk: 4732 destroy_workqueue(floppy_wq); 4733 for (drive = 0; drive < N_DRIVE; drive++) { 4734 if (!disks[drive][0]) 4735 break; 4736 del_timer_sync(&motor_off_timer[drive]); 4737 blk_cleanup_disk(disks[drive][0]); 4738 blk_mq_free_tag_set(&tag_sets[drive]); 4739 } 4740 return err; 4741 } 4742 4743 #ifndef MODULE 4744 static __init void floppy_async_init(void *data, async_cookie_t cookie) 4745 { 4746 do_floppy_init(); 4747 } 4748 #endif 4749 4750 static int __init floppy_init(void) 4751 { 4752 #ifdef MODULE 4753 return do_floppy_init(); 4754 #else 4755 /* Don't hold up the bootup by the floppy initialization */ 4756 async_schedule(floppy_async_init, NULL); 4757 return 0; 4758 #endif 4759 } 4760 4761 static const struct io_region { 4762 int offset; 4763 int size; 4764 } io_regions[] = { 4765 { 2, 1 }, 4766 /* address + 3 is sometimes reserved by pnp bios for motherboard */ 4767 { 4, 2 }, 4768 /* address + 6 is reserved, and may be taken by IDE. 4769 * Unfortunately, Adaptec doesn't know this :-(, */ 4770 { 7, 1 }, 4771 }; 4772 4773 static void floppy_release_allocated_regions(int fdc, const struct io_region *p) 4774 { 4775 while (p != io_regions) { 4776 p--; 4777 release_region(fdc_state[fdc].address + p->offset, p->size); 4778 } 4779 } 4780 4781 #define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)])) 4782 4783 static int floppy_request_regions(int fdc) 4784 { 4785 const struct io_region *p; 4786 4787 for (p = io_regions; p < ARRAY_END(io_regions); p++) { 4788 if (!request_region(fdc_state[fdc].address + p->offset, 4789 p->size, "floppy")) { 4790 DPRINT("Floppy io-port 0x%04lx in use\n", 4791 fdc_state[fdc].address + p->offset); 4792 floppy_release_allocated_regions(fdc, p); 4793 return -EBUSY; 4794 } 4795 } 4796 return 0; 4797 } 4798 4799 static void floppy_release_regions(int fdc) 4800 { 4801 floppy_release_allocated_regions(fdc, ARRAY_END(io_regions)); 4802 } 4803 4804 static int floppy_grab_irq_and_dma(void) 4805 { 4806 int fdc; 4807 4808 if (atomic_inc_return(&usage_count) > 1) 4809 return 0; 4810 4811 /* 4812 * We might have scheduled a free_irq(), wait it to 4813 * drain first: 4814 */ 4815 flush_workqueue(floppy_wq); 4816 4817 if (fd_request_irq()) { 4818 DPRINT("Unable to grab IRQ%d for the floppy driver\n", 4819 FLOPPY_IRQ); 4820 atomic_dec(&usage_count); 4821 return -1; 4822 } 4823 if (fd_request_dma()) { 4824 DPRINT("Unable to grab DMA%d for the floppy driver\n", 4825 FLOPPY_DMA); 4826 if (can_use_virtual_dma & 2) 4827 use_virtual_dma = can_use_virtual_dma = 1; 4828 if (!(can_use_virtual_dma & 1)) { 4829 fd_free_irq(); 4830 atomic_dec(&usage_count); 4831 return -1; 4832 } 4833 } 4834 4835 for (fdc = 0; fdc < N_FDC; fdc++) { 4836 if (fdc_state[fdc].address != -1) { 4837 if (floppy_request_regions(fdc)) 4838 goto cleanup; 4839 } 4840 } 4841 for (fdc = 0; fdc < N_FDC; fdc++) { 4842 if (fdc_state[fdc].address != -1) { 4843 reset_fdc_info(fdc, 1); 4844 fdc_outb(fdc_state[fdc].dor, fdc, FD_DOR); 4845 } 4846 } 4847 4848 set_dor(0, ~0, 8); /* avoid immediate interrupt */ 4849 4850 for (fdc = 0; fdc < N_FDC; fdc++) 4851 if (fdc_state[fdc].address != -1) 4852 fdc_outb(fdc_state[fdc].dor, fdc, FD_DOR); 4853 /* 4854 * The driver will try and free resources and relies on us 4855 * to know if they were allocated or not. 4856 */ 4857 current_fdc = 0; 4858 irqdma_allocated = 1; 4859 return 0; 4860 cleanup: 4861 fd_free_irq(); 4862 fd_free_dma(); 4863 while (--fdc >= 0) 4864 floppy_release_regions(fdc); 4865 current_fdc = 0; 4866 atomic_dec(&usage_count); 4867 return -1; 4868 } 4869 4870 static void floppy_release_irq_and_dma(void) 4871 { 4872 int fdc; 4873 #ifndef __sparc__ 4874 int drive; 4875 #endif 4876 long tmpsize; 4877 unsigned long tmpaddr; 4878 4879 if (!atomic_dec_and_test(&usage_count)) 4880 return; 4881 4882 if (irqdma_allocated) { 4883 fd_disable_dma(); 4884 fd_free_dma(); 4885 fd_free_irq(); 4886 irqdma_allocated = 0; 4887 } 4888 set_dor(0, ~0, 8); 4889 #if N_FDC > 1 4890 set_dor(1, ~8, 0); 4891 #endif 4892 4893 if (floppy_track_buffer && max_buffer_sectors) { 4894 tmpsize = max_buffer_sectors * 1024; 4895 tmpaddr = (unsigned long)floppy_track_buffer; 4896 floppy_track_buffer = NULL; 4897 max_buffer_sectors = 0; 4898 buffer_min = buffer_max = -1; 4899 fd_dma_mem_free(tmpaddr, tmpsize); 4900 } 4901 #ifndef __sparc__ 4902 for (drive = 0; drive < N_FDC * 4; drive++) 4903 if (timer_pending(motor_off_timer + drive)) 4904 pr_info("motor off timer %d still active\n", drive); 4905 #endif 4906 4907 if (delayed_work_pending(&fd_timeout)) 4908 pr_info("floppy timer still active:%s\n", timeout_message); 4909 if (delayed_work_pending(&fd_timer)) 4910 pr_info("auxiliary floppy timer still active\n"); 4911 if (work_pending(&floppy_work)) 4912 pr_info("work still pending\n"); 4913 for (fdc = 0; fdc < N_FDC; fdc++) 4914 if (fdc_state[fdc].address != -1) 4915 floppy_release_regions(fdc); 4916 } 4917 4918 #ifdef MODULE 4919 4920 static char *floppy; 4921 4922 static void __init parse_floppy_cfg_string(char *cfg) 4923 { 4924 char *ptr; 4925 4926 while (*cfg) { 4927 ptr = cfg; 4928 while (*cfg && *cfg != ' ' && *cfg != '\t') 4929 cfg++; 4930 if (*cfg) { 4931 *cfg = '\0'; 4932 cfg++; 4933 } 4934 if (*ptr) 4935 floppy_setup(ptr); 4936 } 4937 } 4938 4939 static int __init floppy_module_init(void) 4940 { 4941 if (floppy) 4942 parse_floppy_cfg_string(floppy); 4943 return floppy_init(); 4944 } 4945 module_init(floppy_module_init); 4946 4947 static void __exit floppy_module_exit(void) 4948 { 4949 int drive, i; 4950 4951 unregister_blkdev(FLOPPY_MAJOR, "fd"); 4952 platform_driver_unregister(&floppy_driver); 4953 4954 destroy_workqueue(floppy_wq); 4955 4956 for (drive = 0; drive < N_DRIVE; drive++) { 4957 del_timer_sync(&motor_off_timer[drive]); 4958 4959 if (floppy_available(drive)) { 4960 for (i = 0; i < ARRAY_SIZE(floppy_type); i++) { 4961 if (disks[drive][i]) 4962 del_gendisk(disks[drive][i]); 4963 } 4964 if (registered[drive]) 4965 platform_device_unregister(&floppy_device[drive]); 4966 } 4967 for (i = 0; i < ARRAY_SIZE(floppy_type); i++) { 4968 if (disks[drive][i]) 4969 blk_cleanup_disk(disks[drive][i]); 4970 } 4971 blk_mq_free_tag_set(&tag_sets[drive]); 4972 } 4973 4974 cancel_delayed_work_sync(&fd_timeout); 4975 cancel_delayed_work_sync(&fd_timer); 4976 4977 if (atomic_read(&usage_count)) 4978 floppy_release_irq_and_dma(); 4979 4980 /* eject disk, if any */ 4981 fd_eject(0); 4982 } 4983 4984 module_exit(floppy_module_exit); 4985 4986 module_param(floppy, charp, 0); 4987 module_param(FLOPPY_IRQ, int, 0); 4988 module_param(FLOPPY_DMA, int, 0); 4989 MODULE_AUTHOR("Alain L. Knaff"); 4990 MODULE_LICENSE("GPL"); 4991 4992 /* This doesn't actually get used other than for module information */ 4993 static const struct pnp_device_id floppy_pnpids[] = { 4994 {"PNP0700", 0}, 4995 {} 4996 }; 4997 4998 MODULE_DEVICE_TABLE(pnp, floppy_pnpids); 4999 5000 #else 5001 5002 __setup("floppy=", floppy_setup); 5003 module_init(floppy_init) 5004 #endif 5005 5006 MODULE_ALIAS_BLOCKDEV_MAJOR(FLOPPY_MAJOR); 5007